Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Felipe Balbi <balbi@kernel.org>
To: Vicente Bergas <vicencb@gmail.com>
Cc: Robin Murphy <robin.murphy@arm.com>,
	Heiko Stuebner <heiko@sntech.de>,
	Will Deacon <will.deacon@arm.com>,
	Marc Zyngier <marc.zyngier@arm.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Matthias Brugger <mbrugger@suse.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: kexec on rk3399
Date: Thu, 15 Aug 2019 09:00:16 +0300
Message-ID: <87sgq3t1cf.fsf@gmail.com> (raw)
In-Reply-To: <4fc3e5b5-31fe-41f6-8031-b37454f21437@gmail.com>


Hi,

Vicente Bergas <vicencb@gmail.com> writes:
>> Vicente Bergas <vicencb@gmail.com> writes:
>>> On Monday, July 22, 2019 4:31:27 PM CEST, Vicente Bergas wrote:
>>>> Hi, i have been running linux on rk3399 booted with kexec fine until 5.2
>>>> From 5.2 onwards, there are memory corruption issues as reported here:
>>>> http://lkml.iu.edu/hypermail/linux/kernel/1906.2/07211.html
>>>> kexec has been identified as the principal reason for the issues.
>>>> 
>>>> It turns out that kexec has never worked reliably on this platform, ...
>>> 
>>> Thank you all for your suggestions on where the issue could be.
>>> 
>>> It seems that it was the USB driver.
>>> Now using v5.2.8 booted with kexec from v5.2.8 with a workaround and
>>> so far so good. It is being tested on the Sapphire board.
>>> 
>>> The workaround is:
>>> --- a/drivers/usb/dwc3/dwc3-of-simple.c
>>> +++ b/drivers/usb/dwc3/dwc3-of-simple.c
>>> @@ -133,6 +133,13 @@
>>>  	return 0;
>>>  }
>>>  
>>> +static void dwc3_of_simple_shutdown(struct platform_device *pdev)
>>> +{
>>> +	struct dwc3_of_simple *simple = platform_get_drvdata(pdev);
>>> +
>>> +	reset_control_assert(simple->resets);
>>> +}
>>> +
>>>  static int __maybe_unused dwc3_of_simple_runtime_suspend(struct device 
>>> *dev)
>>>  {
>>>  	struct dwc3_of_simple	*simple = dev_get_drvdata(dev);
>>> @@ -190,6 +197,7 @@
>>>  static struct platform_driver dwc3_of_simple_driver = {
>>>  	.probe		= dwc3_of_simple_probe,
>>>  	.remove		= dwc3_of_simple_remove,
>>> +	.shutdown	= dwc3_of_simple_shutdown,
>>>  	.driver		= {
>>>  		.name	= "dwc3-of-simple",
>>>  		.of_match_table = of_dwc3_simple_match,
>>> 
>>> If this patch is OK after review i can resubmit it as a pull request.
>>
>> not a pull request, just send a patch using git send-email
>>
>>> Should a similar change be applied to drivers/usb/dwc3/core.c ?
>>
>> Is it necessary? We haven't had any bug reports regarding that. Also, if
>> we have reset control support in the core driver, why do we need it in
>> of_simple? Seems like of_simple could just rely on what core does.
>
> the workaround has been tested patching only core.c with
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -1561,6 +1561,13 @@
>  	return 0;
>  }
>  
> +static void dwc3_shutdown(struct platform_device *pdev)
> +{
> +	struct dwc3 *dwc = platform_get_drvdata(pdev);
> +
> +	reset_control_assert(dwc->reset);
> +}
> +
>  #ifdef CONFIG_PM
>  static int dwc3_core_init_for_resume(struct dwc3 *dwc)
>  {
> @@ -1866,6 +1873,7 @@
>  static struct platform_driver dwc3_driver = {
>  	.probe		= dwc3_probe,
>  	.remove		= dwc3_remove,
> +	.shutdown	= dwc3_shutdown,
>  	.driver		= {
>  		.name	= "dwc3",
>  		.of_match_table	= of_match_ptr(of_dwc3_match),
>
> and leaving dwc3-of-simple.c as is, the issue persisted.

That's because your reset controller is not passed to dwc3 core, only to
your glue layer.

-- 
balbi

  reply index

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <ebcb52be-2063-4e2c-9a09-fdcacb94f855@gmail.com>
2019-08-14 12:53 ` Vicente Bergas
2019-08-14 13:06   ` Felipe Balbi
2019-08-14 13:15     ` Vicente Bergas
2019-08-15  6:00       ` Felipe Balbi [this message]
2019-08-14 13:12   ` Robin Murphy
2019-08-15  1:15     ` Vicente Bergas
2019-08-15  6:06       ` Felipe Balbi
2019-08-15 11:09         ` Robin Murphy
2019-08-17 17:41           ` [PATCH] usb: dwc3: Add shutdown to platform_driver Vicente Bergas
2019-08-27 11:45             ` Vicente Bergas
2019-08-27 11:53               ` Felipe Balbi
2019-08-27 12:16                 ` Vicente Bergas
2019-09-09 15:07                   ` Vicente Bergas
2019-09-19 11:36             ` Vicente Bergas

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87sgq3t1cf.fsf@gmail.com \
    --to=balbi@kernel.org \
    --cc=catalin.marinas@arm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heiko@sntech.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=marc.zyngier@arm.com \
    --cc=mbrugger@suse.com \
    --cc=robin.murphy@arm.com \
    --cc=vicencb@gmail.com \
    --cc=will.deacon@arm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org linux-usb@archiver.kernel.org
	public-inbox-index linux-usb


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/ public-inbox