From: Felipe Balbi <balbi@kernel.org>
To: Sandeep Maheswaram <sanm@codeaurora.org>,
Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Stephen Boyd <swboyd@chromium.org>,
Doug Anderson <dianders@chromium.org>,
Matthias Kaehlcke <mka@chromium.org>
Cc: linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org,
Manu Gautam <mgautam@codeaurora.org>,
Sandeep Maheswaram <sanm@codeaurora.org>
Subject: Re: [PATCH v7 1/5] usb: dwc3: host: Set PHY mode during suspend
Date: Wed, 28 Apr 2021 12:55:21 +0300 [thread overview]
Message-ID: <87tunqka2e.fsf@kernel.org> (raw)
In-Reply-To: <1619586716-8687-2-git-send-email-sanm@codeaurora.org>
[-- Attachment #1: Type: text/plain, Size: 2790 bytes --]
Hi,
Sandeep Maheswaram <sanm@codeaurora.org> writes:
> During suspend read the status of all port and make sure the PHYs
> are in the correct mode based on current speed.
> Phy interrupt masks are set based on this mode. Keep track of the mode
> of the HS PHY to be able to configure wakeup properly.
>
> Also check during suspend if any wakeup capable devices are
> connected to the controller (directly or through hubs), if there
> are none set a flag to indicate that the PHY should be powered
> down during suspend.
>
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> ---
> drivers/usb/dwc3/core.h | 3 +++
> drivers/usb/dwc3/host.c | 59 +++++++++++++++++++++++++++++++++++++++++++++++++
> 2 files changed, 62 insertions(+)
>
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index b1e875c..cecd278 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -1123,6 +1123,9 @@ struct dwc3 {
>
> bool phys_ready;
>
> + unsigned int hs_phy_mode;
> + bool phy_power_off;
> +
> struct ulpi *ulpi;
> bool ulpi_ready;
>
> diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
> index f29a264..527f04c 100644
> --- a/drivers/usb/dwc3/host.c
> +++ b/drivers/usb/dwc3/host.c
> @@ -11,6 +11,14 @@
> #include <linux/platform_device.h>
>
> #include "core.h"
> +#include "../host/xhci.h"
> +#include "../host/xhci-plat.h"
> +
> +static int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd);
> +
> +static const struct xhci_plat_priv xhci_plat_dwc3_xhci = {
> + .suspend_quirk = xhci_dwc3_suspend_quirk,
> +};
we're passing data using device_properties, why do you want this here?
> @@ -115,6 +123,13 @@ int dwc3_host_init(struct dwc3 *dwc)
> }
> }
>
> + ret = platform_device_add_data(xhci, &xhci_plat_dwc3_xhci,
> + sizeof(struct xhci_plat_priv));
> + if (ret) {
> + dev_err(dwc->dev, "failed to add data to xHCI\n");
> + goto err;
> + }
> +
> ret = platform_device_add(xhci);
> if (ret) {
> dev_err(dwc->dev, "failed to register xHCI device\n");
> @@ -127,6 +142,50 @@ int dwc3_host_init(struct dwc3 *dwc)
> return ret;
> }
>
> +static void dwc3_set_phy_mode(struct usb_hcd *hcd)
> +{
> +
> + int i, num_ports;
> + u32 reg;
> + unsigned int ss_phy_mode = 0;
> + struct dwc3 *dwc = dev_get_drvdata(hcd->self.controller->parent);
> + struct xhci_hcd *xhci_hcd = hcd_to_xhci(hcd);
> +
> + dwc->hs_phy_mode = 0;
> +
> + reg = readl(&xhci_hcd->cap_regs->hcs_params1);
> + num_ports = HCS_MAX_PORTS(reg);
there's a big assumption here that xhci is still alive. Why isn't this
quirk implemented in xhci-plat itself?
> +int xhci_dwc3_suspend_quirk(struct usb_hcd *hcd)
who calls this?
--
balbi
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 857 bytes --]
next prev parent reply other threads:[~2021-04-28 9:55 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-28 5:11 [PATCH v7 0/5] USB DWC3 host wake up support from system suspend Sandeep Maheswaram
2021-04-28 5:11 ` [PATCH v7 1/5] usb: dwc3: host: Set PHY mode during suspend Sandeep Maheswaram
2021-04-28 9:55 ` Felipe Balbi [this message]
[not found] ` <fd927828-a414-cd42-1e4a-b9e9b0744a3a@codeaurora.org>
2021-05-03 11:16 ` Felipe Balbi
2021-05-12 19:12 ` Matthias Kaehlcke
2021-05-13 13:46 ` Felipe Balbi
2021-05-13 14:37 ` Matthias Kaehlcke
2021-04-28 5:11 ` [PATCH v7 2/5] usb: dwc3: core: Host wake up support from system suspend Sandeep Maheswaram
2021-04-28 9:59 ` Felipe Balbi
2021-05-03 4:33 ` Sandeep Maheswaram
2021-05-03 11:20 ` Felipe Balbi
2021-05-12 21:47 ` Matthias Kaehlcke
2021-05-26 4:29 ` Sandeep Maheswaram
2021-04-28 5:11 ` [PATCH v7 3/5] usb: dwc3: qcom: Add helper functions to enable,disable wake irqs Sandeep Maheswaram
2021-04-28 5:11 ` [PATCH v7 4/5] usb: dwc3: qcom: Configure wakeup interrupts during suspend Sandeep Maheswaram
2021-04-28 10:02 ` Felipe Balbi
2021-04-28 5:11 ` [PATCH v7 5/5] usb: dwc3: qcom: Keep power domain on to support wakeup Sandeep Maheswaram
2021-04-28 10:04 ` Felipe Balbi
2021-05-13 0:23 ` Matthias Kaehlcke
2021-05-13 13:49 ` Felipe Balbi
2021-05-13 14:34 ` Matthias Kaehlcke
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87tunqka2e.fsf@kernel.org \
--to=balbi@kernel.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=dianders@chromium.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mgautam@codeaurora.org \
--cc=mka@chromium.org \
--cc=sanm@codeaurora.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).