From: Mathias Nyman <mathias.nyman@linux.intel.com>
To: Tejas Joglekar <Tejas.Joglekar@synopsys.com>,
Felipe Balbi <balbi@kernel.org>, Rob Herring <robh@kernel.org>,
Mathias Nyman <mathias.nyman@intel.com>
Cc: "linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
John Youn <John.Youn@synopsys.com>
Subject: Re: [RESENDING RFC PATCH 1/4] dt-bindings: usb: Add snps,consolidate-sgl & consolidate-sgl
Date: Fri, 17 Apr 2020 14:44:50 +0300 [thread overview]
Message-ID: <8bd20e5c-5f59-93f0-ff7d-c9e7ca444ed3@linux.intel.com> (raw)
In-Reply-To: <aa1023c6-fe8c-8f5b-365f-403ac50ac94f@synopsys.com>
On 16.4.2020 19.37, Tejas Joglekar wrote:
> Hi,
> On 4/16/2020 1:52 PM, Felipe Balbi wrote:
>>
>> Hi,
>>
>> Tejas Joglekar <Tejas.Joglekar@synopsys.com> writes:
>>> Hi,
>>> On 4/5/2020 7:15 AM, Rob Herring wrote:
>>>> On Fri, Mar 27, 2020 at 03:11:56PM +0530, Tejas Joglekar wrote:
>>>>> This commit adds the documentation for consolidate-sgl, and
>>>>> snps,consolidate-sgl property. These when set enables the quirk for
>>>>> XHCI driver for consolidation of sg list into a temporary buffer when small
>>>>> buffer sizes are scattered over the sg list not making up to MPS or total
>>>>> transfer size within TRB cache size with Synopsys xHC.
>>>>>
>>>>> Signed-off-by: Tejas Joglekar <joglekar@synopsys.com>
>>>>> ---
>>>>> Documentation/devicetree/bindings/usb/dwc3.txt | 3 +++
>>>>> Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++
>>>>> 2 files changed, 6 insertions(+)
>>>>>
>>>>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
>>>>> index 9946ff9ba735..292d1f7969e4 100644
>>>>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
>>>>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
>>>>> @@ -104,6 +104,9 @@ Optional properties:
>>>>> this and tx-thr-num-pkt-prd to a valid, non-zero value
>>>>> 1-16 (DWC_usb31 programming guide section 1.2.3) to
>>>>> enable periodic ESS TX threshold.
>>>>> + - snps,consolidate-sgl: enable sg list consolidation - host mode only. Set to use
>>>>> + SG buffers of at least MPS size by consolidating smaller SG
>>>>> + buffers list into a single buffer.
>>>>
>>>> The preference is not to keep adding properties for every single quirk
>>>> or feature. These should be implied by specific compatibles. As Synopsys
>>>> knows what quirks/errata/features are in each version of IP, the
>>>> compatible strings should reflect those versions. (And yes, I'm sure
>>>> there's customer ECO fixes that aren't reflected in the version, but
>>>> that's why we have SoC specific compatibles too.) This is the only way
>>>> we can fix quirks in the OS without doing DT updates. For comparison, do
>>>> you want to have to update your PC BIOS so an OS can work-around issues?
>>>>
>>> Yes, I understand what you want to say here. But I think this compatible string
>>> does not work with the platform drivers with PCI based systems. So based on the vendor
>>> id and device id then I need to set the quirk required.
>>>
>>> @Felipe: What do you suggest for setting up quirk without the DT update for dwc3?
>>
>> We have been using Synopsys controller's revision register, but that's
>> not visible to xhci driver and we don't have a separate compatible for
>> each synopsys version on the xhci driver side. One option would be to
>> add "snps,xhci-foo-bar" to xhci-plat and use that.
>>
> @Felipe: Thanks for suggestion
>
> @Mathias: Do you prefer parameter passed this way? I can send the v2 patch set,
> after your input.
should work, I don't see any issues with that.
-Mathias
next prev parent reply other threads:[~2020-04-17 11:42 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-27 8:52 [RESENDING RFC PATCH 0/4] Add logic to consolidate TRBs for Synopsys xHC Tejas Joglekar
2020-03-27 8:34 ` [RFC PATCH 1/4] dt-bindings: usb: Add snps,consolidate-sgl & consolidate-sgl Tejas Joglekar
2020-03-27 9:41 ` [RESENDING RFC " Tejas Joglekar
2020-03-27 9:54 ` Greg KH
2020-03-27 10:11 ` Tejas Joglekar
2020-03-27 10:24 ` Greg KH
2020-03-27 10:28 ` Tejas Joglekar
2020-04-05 1:45 ` Rob Herring
2020-04-14 10:09 ` Tejas Joglekar
2020-04-16 8:22 ` Felipe Balbi
2020-04-16 16:37 ` Tejas Joglekar
2020-04-17 11:44 ` Mathias Nyman [this message]
2020-03-27 8:35 ` [RFC PATCH 2/4] usb: xhci: Set quirk for XHCI_CONSOLIDATE_SG_LIST Tejas Joglekar
2020-03-27 9:42 ` [RESENDING RFC " Tejas Joglekar
2020-03-27 8:35 ` [RFC PATCH 3/4] usb: dwc3: Add device property consolidate-sgl Tejas Joglekar
2020-03-27 9:42 ` [RESENDING RFC " Tejas Joglekar
2020-03-27 8:53 ` [RESENDING RFC PATCH 4/4] usb: xhci: Use temporary buffer to consolidate SG Tejas Joglekar
2020-03-27 9:27 ` Greg KH
2020-03-27 10:05 ` Tejas Joglekar
2020-03-27 10:22 ` Greg KH
2020-03-27 11:25 ` Mathias Nyman
2020-03-27 15:38 ` Raul Rangel
2020-03-27 9:28 ` [RESENDING RFC PATCH 0/4] Add logic to consolidate TRBs for Synopsys xHC Greg KH
2020-03-27 9:43 ` Tejas Joglekar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8bd20e5c-5f59-93f0-ff7d-c9e7ca444ed3@linux.intel.com \
--to=mathias.nyman@linux.intel.com \
--cc=John.Youn@synopsys.com \
--cc=Tejas.Joglekar@synopsys.com \
--cc=balbi@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=mathias.nyman@intel.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).