From: Roger Quadros <rogerq@ti.com>
To: John Stultz <john.stultz@linaro.org>,
lkml <linux-kernel@vger.kernel.org>
Cc: Yu Chen <chenyu56@huawei.com>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Heikki Krogerus <heikki.krogerus@linux.intel.com>,
Suzuki K Poulose <suzuki.poulose@arm.com>,
Chunfeng Yun <chunfeng.yun@mediatek.com>,
Felipe Balbi <balbi@kernel.org>,
Hans de Goede <hdegoede@redhat.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
Jun Li <lijun.kernel@gmail.com>,
Valentin Schneider <valentin.schneider@arm.com>,
<linux-usb@vger.kernel.org>, <devicetree@vger.kernel.org>
Subject: Re: [RFC][PATCH 3/3] usb: dwc3: Registering a role switch in the DRD code.
Date: Tue, 15 Oct 2019 11:25:23 +0300 [thread overview]
Message-ID: <9e86bb7b-5dd2-760e-c324-fe1c1ee41868@ti.com> (raw)
In-Reply-To: <20191002231617.3670-4-john.stultz@linaro.org>
Hi,
On 03/10/2019 02:16, John Stultz wrote:
> From: Yu Chen <chenyu56@huawei.com>
>
> The Type-C drivers use USB role switch API to inform the
> system about the negotiated data role, so registering a role
> switch in the DRD code in order to support platforms with
> USB Type-C connectors.
>
> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
> Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
> Cc: Yu Chen <chenyu56@huawei.com>
> Cc: Felipe Balbi <balbi@kernel.org>
> Cc: Hans de Goede <hdegoede@redhat.com>
> Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
> Cc: Jun Li <lijun.kernel@gmail.com>
> Cc: Valentin Schneider <valentin.schneider@arm.com>
> Cc: linux-usb@vger.kernel.org
> Cc: devicetree@vger.kernel.org
> Suggested-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> Signed-off-by: Yu Chen <chenyu56@huawei.com>
> Signed-off-by: John Stultz <john.stultz@linaro.org>
> ---
> drivers/usb/dwc3/Kconfig | 1 +
> drivers/usb/dwc3/core.h | 6 ++++
> drivers/usb/dwc3/drd.c | 78 +++++++++++++++++++++++++++++++++++++++-
> 3 files changed, 84 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index 89abc6078703..1104745c41a9 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -44,6 +44,7 @@ config USB_DWC3_DUAL_ROLE
> bool "Dual Role mode"
> depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
> depends on (EXTCON=y || EXTCON=USB_DWC3)
> + select USB_ROLE_SWITCH
> help
> This is the default mode of working of DWC3 controller where
> both host and gadget features are enabled.
> diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
> index b3cb6eec3f8f..83728157b3e9 100644
> --- a/drivers/usb/dwc3/core.h
> +++ b/drivers/usb/dwc3/core.h
> @@ -25,6 +25,7 @@
> #include <linux/usb/ch9.h>
> #include <linux/usb/gadget.h>
> #include <linux/usb/otg.h>
> +#include <linux/usb/role.h>
> #include <linux/ulpi/interface.h>
>
> #include <linux/phy/phy.h>
> @@ -951,6 +952,9 @@ struct dwc3_scratchpad_array {
> * @hsphy_mode: UTMI phy mode, one of following:
> * - USBPHY_INTERFACE_MODE_UTMI
> * - USBPHY_INTERFACE_MODE_UTMIW
> + * role_sw: usb_role_switch handle
> + * role_switch_default_mode: default operation mode of controller while
> + * usb role is USB_ROLE_NONE.
> * @usb2_phy: pointer to USB2 PHY
> * @usb3_phy: pointer to USB3 PHY
> * @usb2_generic_phy: pointer to USB2 PHY
> @@ -1085,6 +1089,8 @@ struct dwc3 {
> struct extcon_dev *edev;
> struct notifier_block edev_nb;
> enum usb_phy_interface hsphy_mode;
> + struct usb_role_switch *role_sw;
> + enum usb_dr_mode role_switch_default_mode;
>
> u32 fladj;
> u32 irq_gadget;
> diff --git a/drivers/usb/dwc3/drd.c b/drivers/usb/dwc3/drd.c
> index 726100d1ac0d..95b466a7faa0 100644
> --- a/drivers/usb/dwc3/drd.c
> +++ b/drivers/usb/dwc3/drd.c
> @@ -479,6 +479,58 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
> return edev;
> }
>
> +static int dwc3_usb_role_switch_set(struct device *dev, enum usb_role role)
> +{
> + struct dwc3 *dwc = dev_get_drvdata(dev);
> + u32 mode;
> +
> + switch (role) {
> + case USB_ROLE_HOST:
> + mode = DWC3_GCTL_PRTCAP_HOST;
> + break;
> + case USB_ROLE_DEVICE:
> + mode = DWC3_GCTL_PRTCAP_DEVICE;
> + break;
> + default:
> + if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
> + mode = DWC3_GCTL_PRTCAP_HOST;
> + else
> + mode = DWC3_GCTL_PRTCAP_DEVICE;
> + break;
> + }
> +
> + dwc3_set_mode(dwc, mode);
> + return 0;
> +}
> +
> +static enum usb_role dwc3_usb_role_switch_get(struct device *dev)
> +{
> + struct dwc3 *dwc = dev_get_drvdata(dev);
> + unsigned long flags;
> + enum usb_role role;
> +
> + spin_lock_irqsave(&dwc->lock, flags);
> + switch (dwc->current_dr_role) {
> + case DWC3_GCTL_PRTCAP_HOST:
> + role = USB_ROLE_HOST;
> + break;
> + case DWC3_GCTL_PRTCAP_DEVICE:
> + role = USB_ROLE_DEVICE;
> + break;
> + case DWC3_GCTL_PRTCAP_OTG:
> + role = dwc->current_otg_role;
> + break;
> + default:
> + if (dwc->role_switch_default_mode == USB_DR_MODE_HOST)
> + role = USB_ROLE_HOST;
> + else
> + role = USB_ROLE_DEVICE;
> + break;
> + }
> + spin_unlock_irqrestore(&dwc->lock, flags);
> + return role;
> +}
> +
> int dwc3_drd_init(struct dwc3 *dwc)
> {
> int ret, irq;
> @@ -487,7 +539,28 @@ int dwc3_drd_init(struct dwc3 *dwc)
> if (IS_ERR(dwc->edev))
> return PTR_ERR(dwc->edev);
>
> - if (dwc->edev) {
> + if (device_property_read_bool(dwc->dev, "usb-role-switch")) {
I think we should use role switch unconditionally and get rid of the
debugfs role status/change mechanism.
> + struct usb_role_switch_desc dwc3_role_switch = {0};
> + u32 mode;
> +
> + if (device_property_read_bool(dwc->dev,
> + "role-switch-default-host")) {
> + dwc->role_switch_default_mode = USB_DR_MODE_HOST;
> + mode = DWC3_GCTL_PRTCAP_HOST;
> + } else {
> + dwc->role_switch_default_mode = USB_DR_MODE_PERIPHERAL;
> + mode = DWC3_GCTL_PRTCAP_DEVICE;
> + }
> + dwc3_role_switch.fwnode = dev_fwnode(dwc->dev);
> + dwc3_role_switch.set = dwc3_usb_role_switch_set;
> + dwc3_role_switch.get = dwc3_usb_role_switch_get;
> + dwc->role_sw = usb_role_switch_register(dwc->dev,
> + &dwc3_role_switch);
> + if (IS_ERR(dwc->role_sw))
> + return PTR_ERR(dwc->role_sw);
> +
> + dwc3_set_mode(dwc, mode);
> + } else if (dwc->edev) {
Role switch should exist regardless if dwc->edev is present or not.
> dwc->edev_nb.notifier_call = dwc3_drd_notifier;
> ret = extcon_register_notifier(dwc->edev, EXTCON_USB_HOST,
> &dwc->edev_nb);
> @@ -534,6 +607,9 @@ void dwc3_drd_exit(struct dwc3 *dwc)
> {
> unsigned long flags;
>
> + if (dwc->role_sw)
> + usb_role_switch_unregister(dwc->role_sw);
> +
> if (dwc->edev)
> extcon_unregister_notifier(dwc->edev, EXTCON_USB_HOST,
> &dwc->edev_nb);
>
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2019-10-15 8:25 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-02 23:16 [RFC][PATCH 0/3] dwc3 role-switch handling for HiKey960 John Stultz
2019-10-02 23:16 ` [RFC][PATCH 1/3] dt-bindings: usb: generic: Add role-switch-default-host binding John Stultz
2019-10-02 23:16 ` [RFC][PATCH 2/3] usb: roles: Add usb role switch notifier John Stultz
2019-10-03 9:25 ` Hans de Goede
2019-10-03 20:37 ` John Stultz
2019-10-03 20:51 ` Hans de Goede
2019-10-04 8:12 ` Heikki Krogerus
2019-10-15 5:39 ` John Stultz
2019-10-16 7:27 ` Hans de Goede
2019-10-18 5:55 ` John Stultz
2019-10-18 8:06 ` Hans de Goede
2019-10-18 18:39 ` John Stultz
2019-10-18 19:30 ` Hans de Goede
2019-10-18 19:53 ` John Stultz
2019-10-18 19:59 ` Hans de Goede
2019-10-18 20:12 ` John Stultz
2019-10-18 20:21 ` Hans de Goede
2019-10-18 20:37 ` John Stultz
2019-10-18 21:05 ` Hans de Goede
2019-10-22 5:58 ` John Stultz
2019-11-14 10:11 ` Hans de Goede
2019-11-15 0:23 ` John Stultz
2019-10-16 9:10 ` Hans de Goede
2019-10-03 11:26 ` Greg Kroah-Hartman
2019-10-03 20:45 ` John Stultz
2019-10-03 20:56 ` Hans de Goede
2019-10-03 21:33 ` John Stultz
2019-10-06 15:22 ` Hans de Goede
2019-10-15 7:03 ` John Stultz
2019-10-04 8:00 ` Heikki Krogerus
2019-10-02 23:16 ` [RFC][PATCH 3/3] usb: dwc3: Registering a role switch in the DRD code John Stultz
2019-10-15 8:25 ` Roger Quadros [this message]
2019-10-15 19:10 ` John Stultz
2019-10-16 9:24 ` Roger Quadros
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=9e86bb7b-5dd2-760e-c324-fe1c1ee41868@ti.com \
--to=rogerq@ti.com \
--cc=andy.shevchenko@gmail.com \
--cc=balbi@kernel.org \
--cc=chenyu56@huawei.com \
--cc=chunfeng.yun@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=hdegoede@redhat.com \
--cc=heikki.krogerus@linux.intel.com \
--cc=john.stultz@linaro.org \
--cc=lijun.kernel@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=suzuki.poulose@arm.com \
--cc=valentin.schneider@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).