linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
 messages from 2018-03-24 17:40:27 to 2018-04-04 07:06:34 UTC [more...]

Driver for MaxLinear/Exar USB (UART) Serial adapters
 2018-04-04  7:06 UTC 

usb: dwc3: of-simple: use managed and shared reset control
 2018-04-04  1:25 UTC 

[v2] lan78xx: Connect phy early
 2018-04-03 22:19 UTC 

[4.4,068/134] usb: dwc2: Make sure we disconnect the gadget state
 2018-04-03 17:41 UTC 

usbip: vhc_hcd: prevent module being removed while device are attached
 2018-04-03 15:56 UTC 

[v2,2/5] usb: typec: fusb302: remove max_snk_* for sink config
 2018-04-03 15:25 UTC 

[v2,1/5] usb: typec: tcpm: pdo matching optimization
 2018-04-03 15:17 UTC 

usbip: vhci_hcd: Fix usb device and sockfd leaks
 2018-04-03 13:54 UTC 

[v1] usb: dwc2: Fix kernel doc's warnings
 2018-04-03 13:25 UTC 

[v2] usb: dwc2: Fix kernel doc's warnings
 2018-04-03 13:15 UTC 

[v1] usb: dwc2: Fix kernel doc's warnings
 2018-04-03 13:10 UTC 

[v1] usb: dwc2: Fix kernel doc's warnings
 2018-04-03 12:41 UTC 

[v1] usb: dwc2: Fix kernel doc's warnings
 2018-04-03 11:28 UTC 

[2/2] usb: dwc2: gadget: Change default values
 2018-04-03 11:22 UTC 

[1/2] usb: dwc2: gadget: Fix coverity issue
 2018-04-03 11:22 UTC 

usb: dwc3: of-simple: use managed and shared reset control
 2018-04-03 10:35 UTC 

usb: dwc3: of-simple: use managed and shared reset control
 2018-04-03 10:19 UTC 

usb: musb: Support gadget mode when the port is set to dual role
 2018-04-03  9:29 UTC 

usb: dwc3: of-simple: use managed and shared reset control
 2018-04-03  8:46 UTC 

usb: dwc3: of-simple: use managed and shared reset control
 2018-04-03  8:30 UTC 

[v4,01/13] dt-bindings: connector: add properties for typec
 2018-04-03  8:29 UTC 

usb: dwc3: of-simple: use managed and shared reset control
 2018-04-03  8:00 UTC 

usbip: vhci_hcd: Fix usb device and sockfd leaks
 2018-04-03  6:56 UTC 

usbip: vhc_hcd: prevent module being removed while device are attached
 2018-04-03  6:56 UTC 

usb: gadget: udc-xilinx: Add clock support
 2018-04-03  6:28 UTC 

usb: serial: option: add HP LT4220 support
 2018-04-03  2:34 UTC 

usbip: vhci_hcd: Fix usb device and sockfd leaks
 2018-04-02 20:52 UTC 

usbip: vhc_hcd: prevent module being removed while device are attached
 2018-04-02 20:52 UTC 

usb: core: phy: Fix usb_phy_roothub_add_phy if GENERIC_PHY=n
 2018-04-02 20:27 UTC 

[v3,2/2] net: usb: asix88179_178a: de-duplicate code
 2018-04-02 20:25 UTC 

[v3,2/2] net: usb: asix88179_178a: de-duplicate code
 2018-04-02 19:06 UTC 

[v3,2/2] net: usb: asix88179_178a: de-duplicate code
 2018-04-02 15:21 UTC 

[v3,2/2] net: usb: asix88179_178a: de-duplicate code
 2018-04-02 14:14 UTC 

[4/4] usb: gadget: udc: renesas_usb3: should call devm_phy_get() before add udc
 2018-04-02 12:21 UTC 

[3/4] usb: gadget: udc: renesas_usb3: should call pm_runtime_enable() before add udc
 2018-04-02 12:21 UTC 

[2/4] usb: gadget: udc: renesas_usb3: should remove debugfs
 2018-04-02 12:21 UTC 

[1/4] usb: gadget: udc: renesas_usb3: fix double phy_put()
 2018-04-02 12:21 UTC 

[v3,2/2] net: usb: asix88179_178a: de-duplicate code
 2018-04-02  9:45 UTC 

[v3,2/2] net: usb: asix88179_178a: de-duplicate code
 2018-04-02  7:43 UTC 

[v3,1/2] net: usb: asix88179_178a: set permanent address once only
 2018-04-02  7:43 UTC 

[v2,2/2] net: usb: asix88179_178a: de-duplicate code
 2018-04-01 18:05 UTC 

[4.4,068/134] usb: dwc2: Make sure we disconnect the gadget state
 2018-04-01 15:49 UTC 

usb: core: phy: Fix usb_phy_roothub_add_phy if GENERIC_PHY=n
 2018-03-31 20:12 UTC 

usb: core: phy: Fix usb_phy_roothub_add_phy if GENERIC_PHY=n
 2018-03-31 19:28 UTC 

usb: gadget: f_fs: Add compat_ioctl to epfiles
 2018-03-31 18:41 UTC 

[v2,2/2] net: usb: asix88179_178a: de-duplicate code
 2018-03-31 12:16 UTC 

[v4,07/13] staging: typec: tcpci: register port before request irq
 2018-03-31  8:01 UTC 

[v4,11/13] staging: typec: tcpci: keep the not connecting cc line open
 2018-03-31  4:49 UTC 

[v4,10/13] usb: typec: tcpm: set cc for drp toggling attach
 2018-03-31  4:38 UTC 

[v4,10/13] usb: typec: tcpm: set cc for drp toggling attach
 2018-03-31  3:37 UTC 

[v4,01/13] dt-bindings: connector: add properties for typec
 2018-03-31  3:34 UTC 

[v4,04/13] usb: typec: add fwnode to tcpc
 2018-03-31  3:17 UTC 

[v4,07/13] staging: typec: tcpci: register port before request irq
 2018-03-31  3:09 UTC 

usb: gadget: f_midi: Use refcount when freeing f_midi_opts
 2018-03-31  0:54 UTC 

usb: gadget: f_fs: Add compat_ioctl to epfiles
 2018-03-30 22:32 UTC 

[v4,11/13] staging: typec: tcpci: keep the not connecting cc line open
 2018-03-30 15:15 UTC 

[-next] usb: dwc2: pci: Fix error return code in dwc2_pci_probe()
 2018-03-30  7:35 UTC 

[v4,10/13] usb: typec: tcpm: set cc for drp toggling attach
 2018-03-29 22:49 UTC 

[v4,10/13] usb: typec: tcpm: set cc for drp toggling attach
 2018-03-29 21:18 UTC 

[v4,01/13] dt-bindings: connector: add properties for typec
 2018-03-29 19:54 UTC 

[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
 2018-03-29 19:44 UTC 

usb: musb: gadget: misplaced out of bounds check
 2018-03-29 16:51 UTC 

usb: musb: gadget: misplaced out of bounds check
 2018-03-29 16:36 UTC 

usb: musb: gadget: misplaced out of bounds check
 2018-03-29 15:48 UTC 

[v2,3/3] usb: dwc2: Add High Bandwidth ISOC OUT support
 2018-03-29 14:29 UTC 

[v2,2/3] usb: dwc2: Change ISOC DDMA flow
 2018-03-29 14:28 UTC 

[v2,1/3] usb: dwc2: Enable BNA interrupt for IN endpoints
 2018-03-29 14:28 UTC 

[v4,04/13] usb: typec: add fwnode to tcpc
 2018-03-29 12:57 UTC 

Sorry, Patch wrong (was: patch "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870" added to usb-testing)
 2018-03-29 12:39 UTC 

Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870"
 2018-03-29 12:35 UTC 

usb: musb: Support gadget mode when the port is set to dual role
 2018-03-29 11:57 UTC 

Sorry, Patch wrong (was: patch "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870" added to usb-testing)
 2018-03-29 11:49 UTC 

[v4,07/13] staging: typec: tcpci: register port before request irq
 2018-03-29 10:52 UTC 

[5/5] usb: chipidea: imx: Fix ULPI on imx53
 2018-03-29  9:52 UTC 

[4/5] usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag
 2018-03-29  9:52 UTC 

[3/5] usb: chipidea: usbmisc: small clean up
 2018-03-29  9:52 UTC 

[2/5] usb: chipidea: usbmisc: evdo can be set e/o reset
 2018-03-29  9:52 UTC 

[1/5] usb: chipidea: usbmisc: evdo is only specific to OTG port
 2018-03-29  9:52 UTC 

usb: musb: Support gadget mode when the port is set to dual role
 2018-03-29  9:23 UTC 

usb: chipidea: Don't select EXTCON
 2018-03-29  9:05 UTC 

ftdi_sio: add Id for Physik Instrumente E-870
 2018-03-29  8:34 UTC 

ftdi_sio: add Id for Physik Instrumente E-870
 2018-03-29  6:39 UTC 

usb: dwc3: of-simple: use managed and shared reset control
 2018-03-29  6:07 UTC 

[2/2] usb: dwc3: add clock and resets
 2018-03-29  4:32 UTC 

[v4,2/2] dt-bindings: usb: rt1711h device tree binding document
 2018-03-29  3:09 UTC 

[v8,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
 2018-03-29  2:56 UTC 

[v8,1/2] usb/gadget: Constify usb_gadget_get_string "table" argument
 2018-03-29  2:56 UTC 

[-next] usb: dwc3: gadget: dwc3_gadget_del_and_unmap_request() can be static
 2018-03-29  2:20 UTC 

[-next] usb: roles: Fix potential NULL dereference in intel_xhci_usb_probe()
 2018-03-29  2:14 UTC 

[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
 2018-03-28 23:19 UTC 

[v7] usb/gadget: Add driver for Aspeed SoC virtual hub
 2018-03-28 23:10 UTC 

[v7] usb/gadget: Add driver for Aspeed SoC virtual hub
 2018-03-28 22:26 UTC 

[v7] usb/gadget: Add driver for Aspeed SoC virtual hub
 2018-03-28 22:19 UTC 

usb: musb: Support gadget mode when the port is set to dual role
 2018-03-28 21:52 UTC 

Yet another entry for the FTDI serial USB
 2018-03-28 18:09 UTC 

[v4,13/13] staging: typec: tcpci: move tcpci driver out of staging
 2018-03-28 16:06 UTC 

[v4,12/13] staging: typec: tcpci: Only touch target bit when enable vconn
 2018-03-28 16:06 UTC 

[v4,11/13] staging: typec: tcpci: keep the not connecting cc line open
 2018-03-28 16:06 UTC 

[v4,10/13] usb: typec: tcpm: set cc for drp toggling attach
 2018-03-28 16:06 UTC 

[v4,09/13] typec: tcpm: add starting value for drp toggling
 2018-03-28 16:06 UTC 

[v4,08/13] staging: typec: tcpci: enable vbus detection
 2018-03-28 16:06 UTC 

[v4,07/13] staging: typec: tcpci: register port before request irq
 2018-03-28 16:06 UTC 

[v4,06/13] usb: typec: tcpm: support get typec and pd config from device properties
 2018-03-28 16:06 UTC 

[v4,05/13] usb: typec: add API to get typec basic port power and data config
 2018-03-28 16:06 UTC 

[v4,04/13] usb: typec: add fwnode to tcpc
 2018-03-28 16:06 UTC 

[v4,03/13] staging: typec: tcpci: add compatible string for nxp ptn5110
 2018-03-28 16:06 UTC 

[v4,02/13] dt-bindings: usb: add documentation for typec port controller(TCPCI)
 2018-03-28 16:06 UTC 

[v4,01/13] dt-bindings: connector: add properties for typec
 2018-03-28 16:06 UTC 

[-next] usb: dwc2: pci: Fix error return code in dwc2_pci_probe()
 2018-03-28 13:41 UTC 

Yet another entry for the FTDI serial USB
 2018-03-28 13:20 UTC 

[v2,1/1] usb: xhci: do not create and register shared_hcd when USB3.0 is disabled
 2018-03-28  9:53 UTC 

[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
 2018-03-28  7:43 UTC 

usb: gadget: udc: core: Document the relation between usb_ep_queue() and completion callback
 2018-03-28  7:40 UTC 

[usb-next,v4,2/2] usb: core: use phy_exit during suspend if wake up is not supported
 2018-03-27 21:26 UTC 

[usb-next,v4,1/2] usb: core: split usb_phy_roothub_{init,alloc}
 2018-03-27 21:26 UTC 

[v6] usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
 2018-03-27 17:06 UTC 

[v4,2/2] dt-bindings: usb: rt1711h device tree binding document
 2018-03-27 14:30 UTC 

usb: gadget: udc: core: Document the relation between usb_ep_queue() and completion callback
 2018-03-27 14:27 UTC 

[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
 2018-03-27 14:13 UTC 

[v2,2/2] usb: dwc3: gadget: Correct the logic for queuing sgs
 2018-03-27 11:05 UTC 

[v2,1/2] usb: dwc3: gadget: Correct handling of scattergather lists
 2018-03-27 11:05 UTC 

[RFC,usb-next,v3,1/2] usb: core: split usb_phy_roothub_{init,alloc}
 2018-03-27  9:00 UTC 

[RFC,usb-next,v3,2/2] usb: core: use phy_exit during suspend if wake up is not supported
 2018-03-27  8:24 UTC 

[RFC,usb-next,v3,1/2] usb: core: split usb_phy_roothub_{init,alloc}
 2018-03-27  8:24 UTC 

[v7] usb/gadget: Add driver for Aspeed SoC virtual hub
 2018-03-27  7:57 UTC 

[v7] usb/gadget: Add driver for Aspeed SoC virtual hub
 2018-03-27  7:30 UTC 

[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
 2018-03-27  6:59 UTC 

[RFC,usb-next,v3,2/2] usb: core: use phy_exit during suspend if wake up is not supported
 2018-03-27  3:20 UTC 

[RFC,usb-next,v3,1/2] usb: core: split usb_phy_roothub_{init,alloc}
 2018-03-27  3:19 UTC 

[usb-next,v1] usb: core: phy: fix return value of usb_phy_roothub_exit()
 2018-03-27  0:58 UTC 

[RFC,usb-next,v2,1/2] usb: core: split usb_phy_roothub_{init,alloc}
 2018-03-27  0:50 UTC 

[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
 2018-03-27  0:45 UTC 

[v2,3/5] dt-bindings: usb: fusb302: remove max-sink-* properties
 2018-03-26 22:25 UTC 

[v4,2/2] dt-bindings: usb: rt1711h device tree binding document
 2018-03-26 22:23 UTC 

[RFC,usb-next,v3,2/2] usb: core: use phy_exit during suspend if wake up is not supported
 2018-03-26 20:38 UTC 

[RFC,usb-next,v3,1/2] usb: core: split usb_phy_roothub_{init,alloc}
 2018-03-26 20:38 UTC 

[RFC,usb-next,v2,1/2] usb: core: split usb_phy_roothub_{init,alloc}
 2018-03-26 20:31 UTC 

[usb-next,v1] usb: core: phy: fix return value of usb_phy_roothub_exit()
 2018-03-26 20:12 UTC 

usb: host: Remove the deprecated ATH79 USB host config options
 2018-03-26 18:28 UTC 

[v3] USB: announce bcdDevice as well as idVendor, idProduct
 2018-03-26 18:27 UTC 

[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
 2018-03-26 17:44 UTC 

[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
 2018-03-26 17:32 UTC 

[PATCHv2] net/usb/qmi_wwan.c: Add USB id for lt4120 modem
 2018-03-26 16:56 UTC 

net: qmi_wwan: add BroadMobi BM806U 2020:2033
 2018-03-26 16:35 UTC 

[4/4] drivers/net: Use octal not symbolic permissions
 2018-03-26 16:08 UTC 

[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
 2018-03-26 15:16 UTC 

[4/4] drivers/net: Use octal not symbolic permissions
 2018-03-26 14:07 UTC 

[v7,2/6] Documentation: power: Initial effort to document power_supply ABI
 2018-03-26 12:50 UTC 

[v7,2/6] Documentation: power: Initial effort to document power_supply ABI
 2018-03-26 12:40 UTC 

[Regression] xhci: some hard drives cannot be seen using a JMicron JMS56x enclosure
 2018-03-26 12:27 UTC 

[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
 2018-03-26 11:51 UTC 

[2/2] usb: dwc3: gadget: never call ->complete() from ->ep_queue()
 2018-03-26 11:23 UTC 

[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
 2018-03-26 10:56 UTC 

[2/2] usb: dwc3: gadget: never call ->complete() from ->ep_queue()
 2018-03-26 10:14 UTC 

[1/2] usb: gadget: udc: core: update usb_ep_queue() documentation
 2018-03-26 10:14 UTC 

usb: xhci-mtk: remove redundant MODULE_ALIAS entries
 2018-03-26 10:03 UTC 

[v7,2/6] Documentation: power: Initial effort to document power_supply ABI
 2018-03-26  9:57 UTC 

[RFC,usb-next,v2,1/2] usb: core: split usb_phy_roothub_{init,alloc}
 2018-03-26  9:57 UTC 

[RFC,usb-next,v2,2/2] usb: core: use phy_exit during suspend if wake up is not supported
 2018-03-26  9:53 UTC 

[v1,3/3] usb: dwc2: Add High Bandwidth ISOC OUT support
 2018-03-26  9:25 UTC 

[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
 2018-03-26  9:00 UTC 

patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
 2018-03-26  7:54 UTC 

[-next] usb: roles: Fix return value check in intel_xhci_usb_probe()
 2018-03-26  7:47 UTC 

[-next] usb: roles: Fix return value check in intel_xhci_usb_probe()
 2018-03-26  6:43 UTC 

[PATCHv2] net/usb/qmi_wwan.c: Add USB id for lt4120 modem
 2018-03-26  5:19 UTC 

[usb-next,v1] usb: core: phy: fix return value of usb_phy_roothub_exit()
 2018-03-26  3:43 UTC 

[RFC,usb-next,v2,1/2] usb: core: split usb_phy_roothub_{init,alloc}
 2018-03-26  3:37 UTC 

[RFC,usb-next,v2,2/2] usb: core: use phy_exit during suspend if wake up is not supported
 2018-03-26  3:21 UTC 

[v7,6/6] typec: tcpm: Add support for sink PPS related messages
 2018-03-26  3:15 UTC 

[v7,5/6] typec: tcpm: Represent source supply through power_supply
 2018-03-26  3:14 UTC 

[v7,1/6] typec: tcpm: Add core support for sink side PPS
 2018-03-26  3:10 UTC 

net/usb/qmi_wwan.c: Add USB id for lt4120 modem
 2018-03-26  1:16 UTC 

[v7] usb/gadget: Add driver for Aspeed SoC virtual hub
 2018-03-26  0:32 UTC 

[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
 2018-03-26  0:30 UTC 

[v6,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
 2018-03-26  0:25 UTC 

[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
 2018-03-26  0:22 UTC 

[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
 2018-03-25 22:55 UTC 

[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
 2018-03-25 20:52 UTC 

[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
 2018-03-25 18:58 UTC 

[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
 2018-03-25 15:45 UTC 

[v6] usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
 2018-03-25 15:25 UTC 

patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
 2018-03-25 14:39 UTC 

patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
 2018-03-25 14:14 UTC 

patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
 2018-03-25 13:26 UTC 

patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
 2018-03-25 12:52 UTC 

patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
 2018-03-25 12:38 UTC 

patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
 2018-03-25 12:31 UTC 

patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
 2018-03-25 11:57 UTC 

patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
 2018-03-25 11:51 UTC 

patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
 2018-03-25 10:48 UTC 

patch 8466489ef5ba48272ba4fa4ea9f8f403306de4c7 breaks Renesas USB3 controller functionality
 2018-03-25 10:37 UTC 

[v6] usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
 2018-03-25  2:03 UTC 

[v6,2/2] usb/gadget: Add driver for Aspeed SoC virtual hub
 2018-03-25  1:25 UTC 

[v6] usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()
 2018-03-25  1:21 UTC 

usb: host: Remove the deprecated ATH79 USB host config options
 2018-03-24 22:47 UTC 

net: qmi_wwan: add BroadMobi BM806U 2020:2033
 2018-03-24 21:08 UTC 

[PATCHv4] phy: mapphone-mdm6600: Add USB PHY driver for MDM6600 on Droid 4
 2018-03-24 20:02 UTC 

usb: dwc3: gadget: Correct the logic for queuing sgs
 2018-03-24 17:53 UTC 

[v2] USB: announce bcdDevice as well as idVendor, idProduct
 2018-03-24 17:43 UTC 

[v3] USB: announce bcdDevice as well as idVendor, idProduct
 2018-03-24 17:40 UTC 


This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).