messages from 2018-04-03 15:17:16 to 2018-04-10 15:22:03 UTC [more...]
Not enough bandwidth with Magewell XI100DUSB-HDMI
2018-04-10 15:22 UTC
net: usb: hso: Replace GFP_ATOMIC with GFP_KERNEL in hso_create_device
2018-04-10 14:59 UTC
net: usb: hso: Replace GFP_ATOMIC with GFP_KERNEL in hso_create_device
2018-04-10 14:35 UTC
lan78xx: Don't reset the interface on open
2018-04-10 14:33 UTC
lan78xx: Don't reset the interface on open
2018-04-10 14:16 UTC
usb: storage: Replace mdelay with msleep in init_freecom
2018-04-10 14:15 UTC
bug report : TBR oveflow
2018-04-10 14:00 UTC
[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
2018-04-10 13:52 UTC
usbip: vhci_hcd: check rhport before using in vhci_hub_control()
2018-04-10 13:50 UTC
usbip: usbip_event: fix to not print kernel pointer address
2018-04-10 13:50 UTC
usbip: usbip_host: fix to hold parent lock for device_attach() calls
2018-04-10 13:50 UTC
bug report : TBR oveflow
2018-04-10 12:40 UTC
usb: role: rcar-usb3-role-switch: add support for R-Car SoCs
2018-04-10 12:40 UTC
[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
2018-04-10 12:28 UTC
lan78xx: Don't reset the interface on open
2018-04-10 12:18 UTC
[2/2] usb: gadget: udc: renesas_usb3: add devm_of_platform_populate()
2018-04-10 12:13 UTC
[1/2] usb: gadget: udc: renesas_usb3: add property "renesas,ignore-id"
2018-04-10 12:13 UTC
usb: role: rcar-usb3-role-switch: add support for R-Car SoCs
2018-04-10 12:03 UTC
[v1,2/2] usb: dwc2: gadget: Change LPM default values
2018-04-10 10:22 UTC
[v1,1/2] usb: dwc2: gadget: Fix coverity issue
2018-04-10 10:21 UTC
[v2,1/2] clk: at91: Added more information logging
2018-04-10 9:54 UTC
[4/4] usb: gadget: udc: renesas_usb3: should call devm_phy_get() before add udc
2018-04-10 9:44 UTC
[v2,5/6] usb: gadget: udc: renesas_usb3: should fail if devm_phy_get() returns error
2018-04-10 9:35 UTC
[v2,6/6] usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnecting
2018-04-10 9:34 UTC
[4/4] usb: gadget: udc: renesas_usb3: should call devm_phy_get() before add udc
2018-04-10 9:33 UTC
usb: serial: option: add HP LT4220 support
2018-04-10 9:04 UTC
[v2] usb: typec: ucsi: fix tracepoint related build error
2018-04-10 8:38 UTC
[v2,2/2] clk: at91: Fix for PLL set_rate changes not being actually written to PLL peripheral bits
2018-04-10 8:32 UTC
[v2,1/2] clk: at91: Added more information logging
2018-04-10 8:24 UTC
usb: typec: ucsi: fix tracepoint related build error
2018-04-10 8:05 UTC
usb: typec: ucsi: fix link error on randconfig
2018-04-10 7:51 UTC
xhci: Fix USB ports for Dell Inspiron 5775
2018-04-10 7:46 UTC
usb: typec: ucsi: fix tracepoint related build error
2018-04-10 7:39 UTC
[2/2] usb: isp1760: Replace mdelay with msleep in isp1760_stop
2018-04-10 7:37 UTC
[1/2] usb: isp1760: Replace mdelay with msleep in isp1760_init_core
2018-04-10 7:36 UTC
[RFT/PATCH,18/38] usb: dwc3: gadget: check for Missed Isoc from event status
2018-04-10 7:35 UTC
[v2] usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-04-10 7:31 UTC
[v2] usb: dwc3: Prevent indefinite sleep in _dwc3_set_mode during suspend/resume
2018-04-10 6:29 UTC
[v2] usb: dwc2: Fix kernel doc's warnings
2018-04-10 5:59 UTC
[v2,6/6] usb: gadget: udc: renesas_usb3: disable the controller's irqs for reconnecting
2018-04-10 5:38 UTC
[v2,5/6] usb: gadget: udc: renesas_usb3: should fail if devm_phy_get() returns error
2018-04-10 5:38 UTC
[v2,4/6] usb: gadget: udc: renesas_usb3: should call devm_phy_get() before add udc
2018-04-10 5:38 UTC
[v2,3/6] usb: gadget: udc: renesas_usb3: should call pm_runtime_enable() before add udc
2018-04-10 5:38 UTC
[v2,2/6] usb: gadget: udc: renesas_usb3: should remove debugfs
2018-04-10 5:38 UTC
[v2,1/6] usb: gadget: udc: renesas_usb3: fix double phy_put()
2018-04-10 5:38 UTC
xhci: Fix USB ports for Dell Inspiron 5775
2018-04-10 4:56 UTC
usb: gadget: f_midi: Add configfs attrs for card and device
2018-04-10 1:56 UTC
usb: gadget: f_fs: Add compat_ioctl to ep0
2018-04-10 1:56 UTC
[v2] usb: gadget: f_fs: Add compat_ioctl to ep0
2018-04-10 1:38 UTC
usb: storage: Replace mdelay with msleep in init_freecom
2018-04-10 1:29 UTC
[4/4] usb: gadget: udc: renesas_usb3: should call devm_phy_get() before add udc
2018-04-10 1:28 UTC
usb: gadget: f_midi: Add configfs attrs for card and device
2018-04-10 1:26 UTC
usb: gadget: f_fs: Add compat_ioctl to ep0
2018-04-10 1:11 UTC
[RFT/PATCH,18/38] usb: dwc3: gadget: check for Missed Isoc from event status
2018-04-10 0:24 UTC
[v2,2/2] clk: at91: Fix for PLL set_rate changes not being actually written to PLL peripheral bits
2018-04-10 0:16 UTC
[v2,1/2] clk: at91: Added more information logging
2018-04-10 0:16 UTC
[v3,3/3] usb: phy: Add Kconfig entry for Tegra PHY driver
2018-04-09 22:02 UTC
[v3,2/3] usb: tegra: Move utmi-pads reset from ehci-tegra to tegra-phy
2018-04-09 22:02 UTC
[v3,1/3] usb: phy: tegra: Cleanup error messages
2018-04-09 22:02 UTC
[v4,02/13] dt-bindings: usb: add documentation for typec port controller(TCPCI)
2018-04-09 20:04 UTC
usb: gadget: f_fs: Add compat_ioctl to ep0
2018-04-09 18:20 UTC
usb: gadget: f_midi: Add configfs attrs for card and device
2018-04-09 18:17 UTC
usb: dwc3: gadget: Fix list_del corruption in dwc3_ep_dequeue
2018-04-09 17:50 UTC
USB: serial: cp210x: Add ID for NI USB serial console
2018-04-09 15:23 UTC
[RFT/PATCH,35/38] usb: dwc3: gadget: combine modify & restore into single argument
2018-04-09 14:35 UTC
[2/2] usb: dwc3: add clock and resets
2018-04-09 13:32 UTC
[4/4] usb: gadget: udc: renesas_usb3: should call devm_phy_get() before add udc
2018-04-09 11:58 UTC
[3/4] usb: gadget: udc: renesas_usb3: should call pm_runtime_enable() before add udc
2018-04-09 11:52 UTC
[2/4] usb: gadget: udc: renesas_usb3: should remove debugfs
2018-04-09 11:51 UTC
[1/4] usb: gadget: udc: renesas_usb3: fix double phy_put()
2018-04-09 11:49 UTC
usb: typec: ucsi: fix tracepoint related build error
2018-04-09 11:40 UTC
[RFT/PATCH,38/38] usb: dwc3: gadget: move dwc3_calc_trbs_left() in place of prototype
2018-04-09 11:26 UTC
[RFT/PATCH,37/38] usb: dwc3: gadget: move set_xfer_resource() in place of prototype
2018-04-09 11:26 UTC
[RFT/PATCH,36/38] usb: dwc3: gadget: remove a few more dwc arguments
2018-04-09 11:26 UTC
[RFT/PATCH,35/38] usb: dwc3: gadget: combine modify & restore into single argument
2018-04-09 11:26 UTC
[RFT/PATCH,34/38] usb: dwc3: gadget: refactor dwc3_gadget_init_endpoints()
2018-04-09 11:26 UTC
[RFT/PATCH,33/38] usb: dwc3: gadget: split dwc3_gadget_ep_cleanup_completed_requests()
2018-04-09 11:26 UTC
[RFT/PATCH,32/38] usb: dwc3: gadget: get rid of the length variable
2018-04-09 11:26 UTC
[RFT/PATCH,31/38] usb: dwc3: gadget: reduce scope of ret variable
2018-04-09 11:26 UTC
[RFT/PATCH,30/38] usb: dwc3: gadget: one declaration per line
2018-04-09 11:26 UTC
[RFT/PATCH,29/38] usb: dwc3: gadget: add a helper to test if a request is completed
2018-04-09 11:26 UTC
[RFT/PATCH,28/38] usb: dwc3: gadget: simplify IOC handling
2018-04-09 11:26 UTC
[RFT/PATCH,27/38] usb: dwc3: gadget: simplify short packet event
2018-04-09 11:26 UTC
[RFT/PATCH,26/38] usb: dwc3: trace: print out event status too
2018-04-09 11:26 UTC
[RFT/PATCH,25/38] usb: dwc3: gadget: simplify unaligned and zlp handling
2018-04-09 11:26 UTC
[RFT/PATCH,24/38] usb: dwc3: gadget: remove unnecessary 'chain' variable
2018-04-09 11:26 UTC
[RFT/PATCH,23/38] usb: dwc3: gadget: remove PENDING handling from cleanup_completed
2018-04-09 11:26 UTC
[RFT/PATCH,22/38] usb: dwc3: gadget: split scatterlist and linear handlers
2018-04-09 11:26 UTC
[RFT/PATCH,21/38] usb: dwc3: gadget: simplify isoc case on cleanup_completed_requests
2018-04-09 11:26 UTC
[RFT/PATCH,20/38] usb: dwc3: gadget: simplify queueing of isoc transfers
2018-04-09 11:26 UTC
[RFT/PATCH,19/38] usb: dwc3: gadget: remove duplicated missed isoc handling
2018-04-09 11:26 UTC
[RFT/PATCH,18/38] usb: dwc3: gadget: check for Missed Isoc from event status
2018-04-09 11:26 UTC
[RFT/PATCH,17/38] usb: dwc3: gadget: remove unnecessary 'ioc' variable
2018-04-09 11:26 UTC
[RFT/PATCH,16/38] usb: dwc3: gadget: make cleanup_completed_requests() return nothing
2018-04-09 11:26 UTC
[RFT/PATCH,15/38] usb: dwc3: gadget: remove DWC3_EP_BUSY flag
2018-04-09 11:26 UTC
[RFT/PATCH,14/38] usb: dwc3: gadget: start removing BUSY flag
2018-04-09 11:26 UTC
[RFT/PATCH,13/38] usb: dwc3: gadget: update dep->frame_number from XferInprogress too
2018-04-09 11:26 UTC
[RFT/PATCH,12/38] usb: dwc3: gadget: always use frame number from XferNotReady
2018-04-09 11:26 UTC
[RFT/PATCH,11/38] usb: dwc3: gadget: remove unnecessary 'dwc' parameter
2018-04-09 11:26 UTC
[RFT/PATCH,10/38] usb: dwc3: gadget: move handler closer to calling site
2018-04-09 11:26 UTC
[RFT/PATCH,09/38] usb: dwc3: gadget: renable dwc3_gadget_start_isoc()
2018-04-09 11:26 UTC
[RFT/PATCH,08/38] usb: dwc3: gadget: remove some pointless checks
2018-04-09 11:26 UTC
[RFT/PATCH,07/38] usb: dwc3: gadget: remove allocated/queued request tracking
2018-04-09 11:26 UTC
[RFT/PATCH,06/38] usb: dwc3: gadget: rename done_trbs and done_reqs
2018-04-09 11:26 UTC
[RFT/PATCH,05/38] usb: dwc3: gadget: don't kick transfer all the time
2018-04-09 11:26 UTC
[RFT/PATCH,04/38] usb: dwc3: gadget: rename dwc3_endpoint_transfer_complete()
2018-04-09 11:26 UTC
[RFT/PATCH,03/38] usb: dwc3: gadget: XferComplete only for EP0
2018-04-09 11:26 UTC
[RFT/PATCH,02/38] usb: dwc3: gadget: XferNotReady is Isoc-only
2018-04-09 11:26 UTC
[RFT/PATCH,01/38] usb: dwc3: gadget: pre-issue Start Transfer for Interrupt EPs too
2018-04-09 11:26 UTC
usb: typec: ucsi: fix tracepoint related build error
2018-04-09 10:01 UTC
[v2,2/5] usb: typec: fusb302: remove max_snk_* for sink config
2018-04-09 9:03 UTC
[v2,2/5] usb: typec: fusb302: remove max_snk_* for sink config
2018-04-09 8:48 UTC
Not enough bandwidth with Magewell XI100DUSB-HDMI
2018-04-09 8:21 UTC
usb: typec: ucsi: fix tracepoint related build error
2018-04-09 7:55 UTC
usb: gadget: udc-xilinx: Add clock support
2018-04-09 7:40 UTC
[v2,2/5] usb: typec: fusb302: remove max_snk_* for sink config
2018-04-09 7:04 UTC
[v2,1/5] usb: typec: tcpm: pdo matching optimization
2018-04-09 6:06 UTC
[v5,2/2] dt-bindings: usb: rt1711h device tree binding document
2018-04-09 2:11 UTC
[v5,1/2] staging: typec: rt1711h typec chip driver
2018-04-09 2:11 UTC
[usb,v5,6/6] usb: core: phy: add the SPDX-License-Identifier and include guard
2018-04-08 21:27 UTC
[usb,v5,5/6] usb: core: phy: add missing forward declaration for "struct device"
2018-04-08 21:27 UTC
[usb,v5,4/6] usb: core: phy: make it a no-op if CONFIG_GENERIC_PHY is disabled
2018-04-08 21:27 UTC
[usb,v5,3/6] usb: core: use phy_exit during suspend if wake up is not supported
2018-04-08 21:27 UTC
[usb,v5,2/6] usb: core: split usb_phy_roothub_{init,alloc}
2018-04-08 21:27 UTC
[usb,v5,1/6] usb: core: phy: fix return value of usb_phy_roothub_exit()
2018-04-08 21:27 UTC
usb: typec: Fix kernel documentation no longer building
2018-04-08 15:11 UTC
[1/2] clk: at91: Added more information logging
2018-04-08 14:43 UTC
usb: typec: Fix kernel documentation no longer building
2018-04-08 13:45 UTC
[1/2] clk: at91: Added more information logging
2018-04-08 10:12 UTC
[1/2] clk: at91: Added more information logging
2018-04-08 9:54 UTC
[1/2] clk: at91: Added more information logging
2018-04-08 9:43 UTC
USB: serial: simple: add libtransistor console
2018-04-07 21:32 UTC
make xmldocs failed with error after 4.17 merge period
2018-04-07 19:19 UTC
Usb: core: Correct self assignment in phy.c
2018-04-07 10:55 UTC
Usb: core: Correct self assignment in phy.c
2018-04-06 23:04 UTC
usbip: vhci_hcd: check rhport before using in vhci_hub_control()
2018-04-06 19:00 UTC
Driver for MaxLinear/Exar USB (UART) Serial adapters
2018-04-06 14:45 UTC
[v2] Documentation: typec.rst: Use literal-block element with ascii art
2018-04-06 14:10 UTC
usb: audio-v2: Correct the comment for struct uac_clock_selector_descriptor
2018-04-06 13:31 UTC
[4.14,36/67] usb: dwc2: Improve gadget state disconnection handling
2018-04-06 13:24 UTC
[4.4,44/72] usb: dwc2: Improve gadget state disconnection handling
2018-04-06 13:23 UTC
[4.9,049/102] usb: dwc2: Improve gadget state disconnection handling
2018-04-06 13:23 UTC
[v2] Documentation: typec.rst: Use literal-block element with ascii art
2018-04-06 12:41 UTC
make xmldocs failed with error after 4.17 merge period
2018-04-06 11:38 UTC
make xmldocs failed with error after 4.17 merge period
2018-04-06 10:51 UTC
make xmldocs failed with error after 4.17 merge period
2018-04-06 10:03 UTC
Documentation: typec.rst: Mark ascii art as a comment
2018-04-06 9:19 UTC
Documentation: typec.rst: Mark ascii art as a comment
2018-04-06 9:12 UTC
make xmldocs failed with error after 4.17 merge period
2018-04-06 9:11 UTC
make xmldocs failed with error after 4.17 merge period
2018-04-06 8:30 UTC
[usb-next,v11,3/8] usb: core: add a wrapper for the USB PHYs on the HCD
2018-04-06 8:28 UTC
Documentation: typec.rst: Mark ascii art as a comment
2018-04-06 8:22 UTC
make xmldocs failed with error after 4.17 merge period
2018-04-06 8:15 UTC
usbip: vhci_hcd: check rhport before using in vhci_hub_control()
2018-04-06 8:01 UTC
make xmldocs failed with error after 4.17 merge period
2018-04-06 7:57 UTC
make xmldocs failed with error after 4.17 merge period
2018-04-06 7:51 UTC
[usb-next,v11,3/8] usb: core: add a wrapper for the USB PHYs on the HCD
2018-04-06 5:15 UTC
[usb-next,v11,3/8] usb: core: add a wrapper for the USB PHYs on the HCD
2018-04-06 3:48 UTC
usbip: vhci_hcd: check rhport before using in vhci_hub_control()
2018-04-05 22:31 UTC
usbip: usbip_event: fix to not print kernel pointer address
2018-04-05 22:29 UTC
usbip: usbip_host: fix to hold parent lock for device_attach() calls
2018-04-05 22:29 UTC
[usb-next,v11,3/8] usb: core: add a wrapper for the USB PHYs on the HCD
2018-04-05 20:04 UTC
usbip: vhc_hcd: prevent module being removed while device are attached
2018-04-05 19:11 UTC
usbip: vhc_hcd: prevent module being removed while device are attached
2018-04-05 17:09 UTC
usbip: vhc_hcd: prevent module being removed while device are attached
2018-04-05 16:54 UTC
usbip: vhci_hcd: Fix usb device and sockfd leaks
2018-04-05 16:50 UTC
usbip: vhc_hcd: prevent module being removed while device are attached
2018-04-05 16:42 UTC
usbip: vhci_hcd: Fix usb device and sockfd leaks
2018-04-05 16:42 UTC
[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
2018-04-05 9:51 UTC
[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
2018-04-05 9:02 UTC
[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
2018-04-05 8:58 UTC
[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
2018-04-05 8:10 UTC
[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
2018-04-05 7:54 UTC
Driver for MaxLinear/Exar USB (UART) Serial adapters
2018-04-05 7:38 UTC
Driver for MaxLinear/Exar USB (UART) Serial adapters
2018-04-05 6:26 UTC
[4/4] usb: gadget: udc: renesas_usb3: should call devm_phy_get() before add udc
2018-04-05 1:34 UTC
[1/4] usb: gadget: udc: renesas_usb3: fix double phy_put()
2018-04-05 1:34 UTC
[2/4] usb: gadget: udc: renesas_usb3: should remove debugfs
2018-04-05 1:34 UTC
[3/4] usb: gadget: udc: renesas_usb3: should call pm_runtime_enable() before add udc
2018-04-05 1:34 UTC
[v2,2/5] usb: typec: fusb302: remove max_snk_* for sink config
2018-04-04 20:12 UTC
usb: select USB_COMMON for usb role switch config
2018-04-04 20:08 UTC
[v2] lan78xx: Connect phy early
2018-04-04 15:41 UTC
usbip: vhc_hcd: prevent module being removed while device are attached
2018-04-04 15:14 UTC
[v4] usb: dwc2: dwc2_vbus_supply_init: fix error check
2018-04-04 13:33 UTC
usb: select USB_COMMON for usb role switch config
2018-04-04 12:21 UTC
[usb-next,v11,3/8] usb: core: add a wrapper for the USB PHYs on the HCD
2018-04-04 12:10 UTC
[v2,2/5] usb: typec: fusb302: remove max_snk_* for sink config
2018-04-04 12:06 UTC
[-next] usb: dwc2: pci: Fix error return code in dwc2_pci_probe()
2018-04-04 11:58 UTC
usbip: vhc_hcd: prevent module being removed while device are attached
2018-04-04 8:25 UTC
usb: dwc3: of-simple: use managed and shared reset control
2018-04-04 8:18 UTC
Driver for MaxLinear/Exar USB (UART) Serial adapters
2018-04-04 8:00 UTC
Driver for MaxLinear/Exar USB (UART) Serial adapters
2018-04-04 7:59 UTC
Driver for MaxLinear/Exar USB (UART) Serial adapters
2018-04-04 7:38 UTC
Driver for MaxLinear/Exar USB (UART) Serial adapters
2018-04-04 7:06 UTC
usb: dwc3: of-simple: use managed and shared reset control
2018-04-04 1:25 UTC
[v2] lan78xx: Connect phy early
2018-04-03 22:19 UTC
[4.4,068/134] usb: dwc2: Make sure we disconnect the gadget state
2018-04-03 17:41 UTC
usbip: vhc_hcd: prevent module being removed while device are attached
2018-04-03 15:56 UTC
[v2,2/5] usb: typec: fusb302: remove max_snk_* for sink config
2018-04-03 15:25 UTC
[v2,1/5] usb: typec: tcpm: pdo matching optimization
2018-04-03 15:17 UTC
page: next (older) | prev (newer) | latest
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).