linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jun Li <lijun.kernel@gmail.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	Douglas Gilbert <dgilbert@interlog.com>
Subject: Re: [PATCH v2] usb: typec: tcpm: Add NULL check before dereferencing config
Date: Thu, 25 Jul 2019 14:09:12 +0800	[thread overview]
Message-ID: <CAKgpwJV_gJ7sBvtv6B89GBSFam6Dn97=BxKkBM8waDKmEa72-g@mail.gmail.com> (raw)
In-Reply-To: <1563979112-22483-1-git-send-email-linux@roeck-us.net>

Guenter Roeck <linux@roeck-us.net> 于2019年7月24日周三 下午10:40写道:
>
> When instantiating tcpm on an NXP OM 13588 board with NXP PTN5110,
> the following crash is seen when writing into the 'preferred_role'
> sysfs attribute.
>
> Unable to handle kernel NULL pointer dereference at virtual address 00000028
> pgd = f69149ad
> [00000028] *pgd=00000000
> Internal error: Oops: 5 [#1] THUMB2
> Modules linked in: tcpci tcpm
> CPU: 0 PID: 1882 Comm: bash Not tainted 5.1.18-sama5-armv7-r2 #4
> Hardware name: Atmel SAMA5
> PC is at tcpm_try_role+0x3a/0x4c [tcpm]
> LR is at tcpm_try_role+0x15/0x4c [tcpm]
> pc : [<bf8000e2>]    lr : [<bf8000bd>]    psr: 60030033
> sp : dc1a1e88  ip : c03fb47d  fp : 00000000
> r10: dc216190  r9 : dc1a1f78  r8 : 00000001
> r7 : df4ae044  r6 : dd032e90  r5 : dd1ce340  r4 : df4ae054
> r3 : 00000000  r2 : 00000000  r1 : 00000000  r0 : df4ae044
> Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA Thumb  Segment none
> Control: 50c53c7d  Table: 3efec059  DAC: 00000051
> Process bash (pid: 1882, stack limit = 0x6a6d4aa5)
> Stack: (0xdc1a1e88 to 0xdc1a2000)
> 1e80:                   dd05d808 dd1ce340 00000001 00000007 dd1ce340 c03fb4a7
> 1ea0: 00000007 00000007 dc216180 00000000 00000000 c01e1e03 00000000 00000000
> 1ec0: c0907008 dee98b40 c01e1d5d c06106c4 00000000 00000000 00000007 c0194e8b
> 1ee0: 0000000a 00000400 00000000 c01a97db dc22bf00 ffffe000 df4b6a00 df745900
> 1f00: 00000001 00000001 000000dd c01a9c2f 7aeab3be c0907008 00000000 dc22bf00
> 1f20: c0907008 00000000 00000000 00000000 00000000 7aeab3be 00000007 dee98b40
> 1f40: 005dc318 dc1a1f78 00000000 00000000 00000007 c01969f7 0000000a c01a20cb
> 1f60: dee98b40 c0907008 dee98b40 005dc318 00000000 c0196b9b 00000000 00000000
> 1f80: dee98b40 7aeab3be 00000074 005dc318 b6f3bdb0 00000004 c0101224 dc1a0000
> 1fa0: 00000004 c0101001 00000074 005dc318 00000001 005dc318 00000007 00000000
> 1fc0: 00000074 005dc318 b6f3bdb0 00000004 00000007 00000007 00000000 00000000
> 1fe0: 00000004 be800880 b6ed35b3 b6e5c746 60030030 00000001 00000000 00000000
> [<bf8000e2>] (tcpm_try_role [tcpm]) from [<c03fb4a7>] (preferred_role_store+0x2b/0x5c)
> [<c03fb4a7>] (preferred_role_store) from [<c01e1e03>] (kernfs_fop_write+0xa7/0x150)
> [<c01e1e03>] (kernfs_fop_write) from [<c0194e8b>] (__vfs_write+0x1f/0x104)
> [<c0194e8b>] (__vfs_write) from [<c01969f7>] (vfs_write+0x6b/0x104)
> [<c01969f7>] (vfs_write) from [<c0196b9b>] (ksys_write+0x43/0x94)
> [<c0196b9b>] (ksys_write) from [<c0101001>] (ret_fast_syscall+0x1/0x62)
>
> Since commit 96232cbc6c994 ("usb: typec: tcpm: support get typec and pd
> config from device properties"), the 'config' pointer in struct tcpc_dev
> is optional when registering a Type-C port. Since it is optional, we have
> to check if it is NULL before dereferencing it.
>
> Reported-by: Douglas Gilbert <dgilbert@interlog.com>
> Cc: Douglas Gilbert <dgilbert@interlog.com>
> Fixes: 96232cbc6c994 ("usb: typec: tcpm: support get typec and pd config from device properties")
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Reviewed-by: Jun Li <jun.li@nxp.com>

> ---
> v2: Added missing Cc:. Sorry for the noise.
>
> Doug:
>     I didn't add your Tested-by: since I added more code.
>     It would be great if you can re-test.
>
>  drivers/usb/typec/tcpm/tcpm.c | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
> index fba32d84e578..77f71f602f73 100644
> --- a/drivers/usb/typec/tcpm/tcpm.c
> +++ b/drivers/usb/typec/tcpm/tcpm.c
> @@ -379,7 +379,8 @@ static enum tcpm_state tcpm_default_state(struct tcpm_port *port)
>                         return SNK_UNATTACHED;
>                 else if (port->try_role == TYPEC_SOURCE)
>                         return SRC_UNATTACHED;
> -               else if (port->tcpc->config->default_role == TYPEC_SINK)
> +               else if (port->tcpc->config &&
> +                        port->tcpc->config->default_role == TYPEC_SINK)
>                         return SNK_UNATTACHED;
>                 /* Fall through to return SRC_UNATTACHED */
>         } else if (port->port_type == TYPEC_PORT_SNK) {
> @@ -4114,7 +4115,7 @@ static int tcpm_try_role(const struct typec_capability *cap, int role)
>         mutex_lock(&port->lock);
>         if (tcpc->try_role)
>                 ret = tcpc->try_role(tcpc, role);
> -       if (!ret && !tcpc->config->try_role_hw)
> +       if (!ret && (!tcpc->config || !tcpc->config->try_role_hw))
>                 port->try_role = role;
>         port->try_src_count = 0;
>         port->try_snk_count = 0;
> @@ -4701,7 +4702,7 @@ static int tcpm_copy_caps(struct tcpm_port *port,
>         port->typec_caps.prefer_role = tcfg->default_role;
>         port->typec_caps.type = tcfg->type;
>         port->typec_caps.data = tcfg->data;
> -       port->self_powered = port->tcpc->config->self_powered;
> +       port->self_powered = tcfg->self_powered;
>
>         return 0;
>  }
> --
> 2.7.4
>

  reply	other threads:[~2019-07-25  6:09 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-07-24 14:38 [PATCH v2] usb: typec: tcpm: Add NULL check before dereferencing config Guenter Roeck
2019-07-25  6:09 ` Jun Li [this message]
2019-07-29 14:15 ` Heikki Krogerus
2019-07-31 16:47 ` Douglas Gilbert
2019-08-01 11:26   ` Douglas Gilbert

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAKgpwJV_gJ7sBvtv6B89GBSFam6Dn97=BxKkBM8waDKmEa72-g@mail.gmail.com' \
    --to=lijun.kernel@gmail.com \
    --cc=dgilbert@interlog.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@roeck-us.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).