Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Rob Herring <robh@kernel.org>
To: Badhri Jagan Sridharan <badhri@google.com>
Cc: Guenter Roeck <linux@roeck-us.net>,
	Heikki Krogerus <heikki.krogerus@linux.intel.com>,
	Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Lee Jones <lee.jones@linaro.org>, Mark Brown <broonie@kernel.org>,
	Maxime Ripard <mripard@kernel.org>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Thierry Reding <treding@nvidia.com>,
	Prashant Malani <pmalani@chromium.org>,
	"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS" 
	<devicetree@vger.kernel.org>, LKML <linux-kernel@vger.kernel.org>,
	USB <linux-usb@vger.kernel.org>,
	Amelie Delaunay <amelie.delaunay@st.com>
Subject: Re: [PATCH v9 05/15] dt-bindings: connector: Add property to set initial current cap for FRS
Date: Tue, 13 Oct 2020 09:15:58 -0500
Message-ID: <CAL_JsqKxW9BeFQGsLqa-ZRurR8gDDrTSaDYs=mj7TYtF9ZDiYQ@mail.gmail.com> (raw)
In-Reply-To: <CAPTae5L6UFGNJ0pxxfFAS3=KDNDVU-WDW-OHk6prLStbe+EaOQ@mail.gmail.com>

On Wed, Oct 7, 2020 at 8:07 PM Badhri Jagan Sridharan <badhri@google.com> wrote:
>
> On Tue, Oct 6, 2020 at 11:29 AM Rob Herring <robh@kernel.org> wrote:
> >
> > On Mon, Sep 28, 2020 at 07:39:54PM -0700, Badhri Jagan Sridharan wrote:
> > > This change adds frs-typec-current which allows setting the initial current
> > > capability of the new source when vSafe5V is applied during PD3.0
> > > sink Fast Role Swap.
> >
> > Shouldn't you Cc the person you copied this from?
> Not sure whether I get this comment. The patch wasn't copied. Maybe you were
> expecting me to CC amelie.delaunay@st.com ? if so, just now CC'ed.
>
> >
> >
> > > Signed-off-by: Badhri Jagan Sridharan <badhri@google.com>
> > > ---
> > > Changes since v1:
> > > - Changing patch version to v6 to fix version number confusion.
> > >
> > > Changes since v6:
> > > - Removed the redundant usb-connector.txt that I created by mistake.
> > > - Moved to yaml.
> > >
> > > Changes since v7:
> > > - Rebase
> > >
> > > Changes since v8:
> > > - Redefine new-source-frs-typec-current as string enums to address
> > >   Rob Herring's comment.
> > > ---
> > >  .../bindings/connector/usb-connector.yaml     | 26 +++++++++++++++++++
> > >  include/dt-bindings/usb/pd.h                  | 10 +++++++
> > >  2 files changed, 36 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/connector/usb-connector.yaml b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> > > index 9bd52e63c935..0b8cd08a8678 100644
> > > --- a/Documentation/devicetree/bindings/connector/usb-connector.yaml
> > > +++ b/Documentation/devicetree/bindings/connector/usb-connector.yaml
> > > @@ -142,6 +142,32 @@ properties:
> > >      required:
> > >        - port@0
> > >
> > > +  new-source-frs-typec-current:
> > > +    description: Initial current capability of the new source when vSafe5V
> > > +      is applied during PD3.0 Fast Role Swap. "Table 6-14 Fixed Supply PDO - Sink"
> > > +      of "USB Power Delivery Specification Revision 3.0, Version 1.2" provides the
> > > +      different power levels and "6.4.1.3.1.6 Fast Role Swap USB Type-C Current"
> > > +      provides a detailed description of the field. The sink PDO from current source
> > > +      reflects the current source's(i.e. transmitter of the FRS signal) power
> > > +      requirement during fr swap. The current sink (i.e. receiver of the FRS signal),
> > > +      a.k.a new source, should check if it will be able to satisfy the current source's,
> > > +      new sink's, requirement during frswap before enabling the frs signal reception.
> > > +      This property refers to maximum current capability that the current sink can
> > > +      satisfy. During FRS, VBUS voltage is at 5V, as the partners are in implicit
> > > +      contract, hence, the power level is only a function of the current capability.
> > > +      "not-supported" implies sink to source fast role swap not supported.
> > > +      "default" refers to default USB power level as described by
> > > +      "Table 6-14 Fixed Supply PDO - Sink".
> > > +      "1.5A" refers to 1.5A@5V.
> > > +      "3.0A" refers to 3.0A@5V.
> >
> >
> > > +
> > > +    $ref: /schemas/types.yaml#/definitions/string
> > > +    enum:
> > > +      - not-supported
> > > +      - default
> > > +      - 1.5A
> > > +      - 3.0A
> >
> > What happens if the property is not present?
>
> The behavior would be the same as "not-supported".

Then you don't need 'not-supported'.

>
> >
> > I'm not crazy about mixing strings and what could be a number.
>
> v8 version[1] of the patch was using uint32. I moved to using strings
> as you were asking to unify with the approach in [2]. Since [3] was using
> string enums, I moved to that. I don't have a strong preference here, so
> I can move back to using u32 if you feel so.

Since the u32 values are based on the USB spec, I think I prefer that.
Should be easier to deal with in the driver than doing strcmp's.

Rob

  reply index

Thread overview: 30+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-09-29  2:39 [PATCH v9 00/15] TCPM support for FRS and AutoDischarge Disconnect Badhri Jagan Sridharan
2020-09-29  2:39 ` [PATCH v9 01/15] usb: typec: tcpci: Add a getter method to retrieve tcpm_port reference Badhri Jagan Sridharan
2020-09-29  2:39 ` [PATCH v9 02/15] usb: typec: tcpci: Add set_vbus tcpci callback Badhri Jagan Sridharan
2020-10-02 13:39   ` Greg Kroah-Hartman
2020-10-02 13:40     ` Greg Kroah-Hartman
2020-10-02 16:08       ` Badhri Jagan Sridharan
2020-10-03 15:57         ` Greg Kroah-Hartman
2020-10-08  6:32           ` Badhri Jagan Sridharan
2020-09-29  2:39 ` [PATCH v9 03/15] dt-bindings: usb: Maxim type-c controller device tree binding document Badhri Jagan Sridharan
2020-10-05 14:46   ` Rob Herring
2020-10-08  0:42     ` Badhri Jagan Sridharan
2020-10-13 13:43       ` Rob Herring
2020-10-13 13:50         ` Rob Herring
2020-10-20  6:16           ` Badhri Jagan Sridharan
2020-09-29  2:39 ` [PATCH v9 04/15] usb: typec: tcpci_maxim: Chip level TCPC driver Badhri Jagan Sridharan
2020-09-29  2:39 ` [PATCH v9 05/15] dt-bindings: connector: Add property to set initial current cap for FRS Badhri Jagan Sridharan
2020-10-06 18:29   ` Rob Herring
2020-10-08  1:06     ` Badhri Jagan Sridharan
2020-10-13 14:15       ` Rob Herring [this message]
2020-10-20  9:43         ` Badhri Jagan Sridharan
2020-09-29  2:39 ` [PATCH v9 06/15] usb: typec: tcpm: Add support for Sink Fast Role SWAP(FRS) Badhri Jagan Sridharan
2020-09-29  2:39 ` [PATCH v9 07/15] usb: typec: tcpci: Implement callbacks for FRS Badhri Jagan Sridharan
2020-09-29  2:39 ` [PATCH v9 08/15] usb: typec: tcpci_maxim: Add support for Sink FRS Badhri Jagan Sridharan
2020-09-29  2:39 ` [PATCH v9 09/15] usb: typec: tcpm: frs sourcing vbus callback Badhri Jagan Sridharan
2020-09-29  2:39 ` [PATCH v9 10/15] usb: typec: tcpci: " Badhri Jagan Sridharan
2020-09-29  2:40 ` [PATCH v9 11/15] usb: typec: tcpci_max77759: Fix vbus stuck on upon diconnecting sink Badhri Jagan Sridharan
2020-09-29  2:40 ` [PATCH v9 12/15] usb: typec: tcpm: Parse frs type-c current from device tree Badhri Jagan Sridharan
2020-09-29  2:40 ` [PATCH v9 13/15] usb: typec: tcpm: Implement enabling Auto Discharge disconnect support Badhri Jagan Sridharan
2020-09-29  2:40 ` [PATCH v9 14/15] usb: typec: tcpci: Implement Auto discharge disconnect callbacks Badhri Jagan Sridharan
2020-09-29  2:40 ` [PATCH v9 15/15] usb: typec: tcpci_maxim: Enable auto discharge disconnect Badhri Jagan Sridharan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='CAL_JsqKxW9BeFQGsLqa-ZRurR8gDDrTSaDYs=mj7TYtF9ZDiYQ@mail.gmail.com' \
    --to=robh@kernel.org \
    --cc=alexandre.belloni@bootlin.com \
    --cc=amelie.delaunay@st.com \
    --cc=badhri@google.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.krogerus@linux.intel.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mripard@kernel.org \
    --cc=pmalani@chromium.org \
    --cc=treding@nvidia.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git