Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Paul Cercueil <paul@crapouillou.net>
To: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Cc: "Mathias Nyman" <mathias.nyman@intel.com>,
	"Felipe Balbi" <balbi@kernel.org>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Alexey Brodkin" <abrodkin@synopsys.com>,
	"Vineet Gupta" <vgupta@synopsys.com>,
	"Hauke Mehrtens" <hauke@hauke-m.de>,
	"Rafał Miłecki" <zajec5@gmail.com>,
	bcm-kernel-feedback-list@broadcom.com,
	"Wei Xu" <xuwei5@hisilicon.com>,
	"Vladimir Zapolskiy" <vz@mleia.com>,
	"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
	"Alexandre Torgue" <alexandre.torgue@st.com>,
	"Thomas Bogendoerfer" <tsbogend@alpha.franken.de>,
	"Matthias Brugger" <matthias.bgg@gmail.com>,
	"Michael Ellerman" <mpe@ellerman.id.au>,
	"Benjamin Herrenschmidt" <benh@kernel.crashing.org>,
	"Paul Mackerras" <paulus@samba.org>,
	"Serge Semin" <fancer.lancer@gmail.com>,
	"Alexey Malahov" <Alexey.Malahov@baikalelectronics.ru>,
	"Pavel Parkhomenko" <Pavel.Parkhomenko@baikalelectronics.ru>,
	"Andy Gross" <agross@kernel.org>,
	"Bjorn Andersson" <bjorn.andersson@linaro.org>,
	"Manu Gautam" <mgautam@codeaurora.org>,
	"Roger Quadros" <rogerq@ti.com>,
	"Lad Prabhakar" <prabhakar.mahadev-lad.rj@bp.renesas.com>,
	"Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>,
	"Neil Armstrong" <narmstrong@baylibre.com>,
	"Kevin Hilman" <khilman@baylibre.com>,
	linux-arm-kernel@lists.infradead.org,
	linux-snps-arc@lists.infradead.org, linux-mips@vger.kernel.org,
	linuxppc-dev@lists.ozlabs.org, linux-usb@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-stm32@st-md-mailman.stormreply.com,
	linux-mediatek@lists.infradead.org
Subject: Re: [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name
Date: Wed, 14 Oct 2020 20:56:01 +0200
Message-ID: <DLG7IQ.15UXZI2H6RYC3@crapouillou.net> (raw)
In-Reply-To: <20201014101402.18271-19-Sergey.Semin@baikalelectronics.ru>



Le mer. 14 oct. 2020 à 13:14, Serge Semin 
<Sergey.Semin@baikalelectronics.ru> a écrit :
> In accordance with the Generic EHCI/OHCI bindings the corresponding 
> node
> name is suppose to comply with the Generic USB HCD DT schema, which
> requires the USB nodes to have the name acceptable by the regexp:
> "^usb(@.*)?" . Let's fix the DTS files, which have the nodes defined 
> with
> incompatible names.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> 
> ---
> 
> Please, test the patch out to make sure it doesn't brake the 
> dependent DTS
> files. I did only a manual grepping of the possible nodes 
> dependencies.
> ---
>  arch/arc/boot/dts/axs10x_mb.dtsi               | 4 ++--
>  arch/arc/boot/dts/hsdk.dts                     | 4 ++--
>  arch/arc/boot/dts/vdk_axs10x_mb.dtsi           | 2 +-
>  arch/arm/boot/dts/bcm5301x.dtsi                | 4 ++--
>  arch/arm/boot/dts/bcm53573.dtsi                | 4 ++--
>  arch/arm/boot/dts/hisi-x5hd2.dtsi              | 4 ++--
>  arch/arm/boot/dts/lpc18xx.dtsi                 | 4 ++--
>  arch/arm/boot/dts/stm32mp151.dtsi              | 4 ++--
>  arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi | 4 ++--
>  arch/arm64/boot/dts/hisilicon/hip06.dtsi       | 4 ++--
>  arch/arm64/boot/dts/hisilicon/hip07.dtsi       | 4 ++--
>  arch/mips/boot/dts/ingenic/jz4740.dtsi         | 2 +-
>  arch/mips/boot/dts/ingenic/jz4770.dtsi         | 2 +-

For jz4740.dtsi and jz4770.dtsi:
Acked-by: Paul Cercueil <paul@crapouillou.net>

Cheers,
-Paul

>  arch/mips/boot/dts/mti/sead3.dts               | 2 +-
>  arch/mips/boot/dts/ralink/mt7628a.dtsi         | 2 +-
>  arch/powerpc/boot/dts/akebono.dts              | 6 +++---
>  16 files changed, 28 insertions(+), 28 deletions(-)
> 
> diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi 
> b/arch/arc/boot/dts/axs10x_mb.dtsi
> index 99d3e7175bf7..b64435385304 100644
> --- a/arch/arc/boot/dts/axs10x_mb.dtsi
> +++ b/arch/arc/boot/dts/axs10x_mb.dtsi
> @@ -87,13 +87,13 @@ gmac: ethernet@18000 {
>  			mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
>  		};
> 
> -		ehci@40000 {
> +		usb@40000 {
>  			compatible = "generic-ehci";
>  			reg = < 0x40000 0x100 >;
>  			interrupts = < 8 >;
>  		};
> 
> -		ohci@60000 {
> +		usb@60000 {
>  			compatible = "generic-ohci";
>  			reg = < 0x60000 0x100 >;
>  			interrupts = < 8 >;
> diff --git a/arch/arc/boot/dts/hsdk.dts b/arch/arc/boot/dts/hsdk.dts
> index dcaa44e408ac..fdd4f7f635d3 100644
> --- a/arch/arc/boot/dts/hsdk.dts
> +++ b/arch/arc/boot/dts/hsdk.dts
> @@ -234,7 +234,7 @@ phy0: ethernet-phy@0 { /* Micrel KSZ9031 */
>  			};
>  		};
> 
> -		ohci@60000 {
> +		usb@60000 {
>  			compatible = "snps,hsdk-v1.0-ohci", "generic-ohci";
>  			reg = <0x60000 0x100>;
>  			interrupts = <15>;
> @@ -242,7 +242,7 @@ ohci@60000 {
>  			dma-coherent;
>  		};
> 
> -		ehci@40000 {
> +		usb@40000 {
>  			compatible = "snps,hsdk-v1.0-ehci", "generic-ehci";
>  			reg = <0x40000 0x100>;
>  			interrupts = <15>;
> diff --git a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi 
> b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
> index cbb179770293..90a412026e64 100644
> --- a/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
> +++ b/arch/arc/boot/dts/vdk_axs10x_mb.dtsi
> @@ -46,7 +46,7 @@ ethernet@18000 {
>  			clock-names = "stmmaceth";
>  		};
> 
> -		ehci@40000 {
> +		usb@40000 {
>  			compatible = "generic-ehci";
>  			reg = < 0x40000 0x100 >;
>  			interrupts = < 8 >;
> diff --git a/arch/arm/boot/dts/bcm5301x.dtsi 
> b/arch/arm/boot/dts/bcm5301x.dtsi
> index 0016720ce530..bf5656d79a55 100644
> --- a/arch/arm/boot/dts/bcm5301x.dtsi
> +++ b/arch/arm/boot/dts/bcm5301x.dtsi
> @@ -261,7 +261,7 @@ usb2: usb2@21000 {
> 
>  			interrupt-parent = <&gic>;
> 
> -			ehci: ehci@21000 {
> +			ehci: usb@21000 {
>  				#usb-cells = <0>;
> 
>  				compatible = "generic-ehci";
> @@ -283,7 +283,7 @@ ehci_port2: port@2 {
>  				};
>  			};
> 
> -			ohci: ohci@22000 {
> +			ohci: usb@22000 {
>  				#usb-cells = <0>;
> 
>  				compatible = "generic-ohci";
> diff --git a/arch/arm/boot/dts/bcm53573.dtsi 
> b/arch/arm/boot/dts/bcm53573.dtsi
> index 4af8e3293cff..51546fccc616 100644
> --- a/arch/arm/boot/dts/bcm53573.dtsi
> +++ b/arch/arm/boot/dts/bcm53573.dtsi
> @@ -135,7 +135,7 @@ usb2: usb2@4000 {
>  			#address-cells = <1>;
>  			#size-cells = <1>;
> 
> -			ehci: ehci@4000 {
> +			ehci: usb@4000 {
>  				compatible = "generic-ehci";
>  				reg = <0x4000 0x1000>;
>  				interrupt-parent = <&gic>;
> @@ -155,7 +155,7 @@ ehci_port2: port@2 {
>  				};
>  			};
> 
> -			ohci: ohci@d000 {
> +			ohci: usb@d000 {
>  				#usb-cells = <0>;
> 
>  				compatible = "generic-ohci";
> diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi 
> b/arch/arm/boot/dts/hisi-x5hd2.dtsi
> index 3ee7967c202d..693b85b2cc7d 100644
> --- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
> +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
> @@ -452,14 +452,14 @@ gmac1: ethernet@1841000 {
>  			status = "disabled";
>  		};
> 
> -		usb0: ehci@1890000 {
> +		usb0: usb@1890000 {
>  			compatible = "generic-ehci";
>  			reg = <0x1890000 0x1000>;
>  			interrupts = <0 66 4>;
>  			clocks = <&clock HIX5HD2_USB_CLK>;
>  		};
> 
> -		usb1: ohci@1880000 {
> +		usb1: usb@1880000 {
>  			compatible = "generic-ohci";
>  			reg = <0x1880000 0x1000>;
>  			interrupts = <0 67 4>;
> diff --git a/arch/arm/boot/dts/lpc18xx.dtsi 
> b/arch/arm/boot/dts/lpc18xx.dtsi
> index 10b8249b8ab6..82ffd7b0ad8a 100644
> --- a/arch/arm/boot/dts/lpc18xx.dtsi
> +++ b/arch/arm/boot/dts/lpc18xx.dtsi
> @@ -121,7 +121,7 @@ mmcsd: mmcsd@40004000 {
>  			status = "disabled";
>  		};
> 
> -		usb0: ehci@40006100 {
> +		usb0: usb@40006100 {
>  			compatible = "nxp,lpc1850-ehci", "generic-ehci";
>  			reg = <0x40006100 0x100>;
>  			interrupts = <8>;
> @@ -133,7 +133,7 @@ usb0: ehci@40006100 {
>  			status = "disabled";
>  		};
> 
> -		usb1: ehci@40007100 {
> +		usb1: usb@40007100 {
>  			compatible = "nxp,lpc1850-ehci", "generic-ehci";
>  			reg = <0x40007100 0x100>;
>  			interrupts = <9>;
> diff --git a/arch/arm/boot/dts/stm32mp151.dtsi 
> b/arch/arm/boot/dts/stm32mp151.dtsi
> index bfe29023fbd5..576f7da564c5 100644
> --- a/arch/arm/boot/dts/stm32mp151.dtsi
> +++ b/arch/arm/boot/dts/stm32mp151.dtsi
> @@ -1404,7 +1404,7 @@ ethernet0: ethernet@5800a000 {
>  			status = "disabled";
>  		};
> 
> -		usbh_ohci: usbh-ohci@5800c000 {
> +		usbh_ohci: usb@5800c000 {
>  			compatible = "generic-ohci";
>  			reg = <0x5800c000 0x1000>;
>  			clocks = <&rcc USBH>;
> @@ -1413,7 +1413,7 @@ usbh_ohci: usbh-ohci@5800c000 {
>  			status = "disabled";
>  		};
> 
> -		usbh_ehci: usbh-ehci@5800d000 {
> +		usbh_ehci: usb@5800d000 {
>  			compatible = "generic-ehci";
>  			reg = <0x5800d000 0x1000>;
>  			clocks = <&rcc USBH>;
> diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi 
> b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> index 12bc1d3ed424..a4acecb75c89 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200.dtsi
> @@ -585,7 +585,7 @@ pcie: pcie@9860000 {
>  			status = "disabled";
>  		};
> 
> -		ohci: ohci@9880000 {
> +		ohci: usb@9880000 {
>  			compatible = "generic-ohci";
>  			reg = <0x9880000 0x10000>;
>  			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> @@ -600,7 +600,7 @@ ohci: ohci@9880000 {
>  			status = "disabled";
>  		};
> 
> -		ehci: ehci@9890000 {
> +		ehci: usb@9890000 {
>  			compatible = "generic-ehci";
>  			reg = <0x9890000 0x10000>;
>  			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
> diff --git a/arch/arm64/boot/dts/hisilicon/hip06.dtsi 
> b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
> index 50ceaa959bdc..1226440d54ad 100644
> --- a/arch/arm64/boot/dts/hisilicon/hip06.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hip06.dtsi
> @@ -373,7 +373,7 @@ refclk: refclk {
>  			#clock-cells = <0>;
>  		};
> 
> -		usb_ohci: ohci@a7030000 {
> +		usb_ohci: usb@a7030000 {
>  			compatible = "generic-ohci";
>  			reg = <0x0 0xa7030000 0x0 0x10000>;
>  			interrupt-parent = <&mbigen_usb>;
> @@ -382,7 +382,7 @@ usb_ohci: ohci@a7030000 {
>  			status = "disabled";
>  		};
> 
> -		usb_ehci: ehci@a7020000 {
> +		usb_ehci: usb@a7020000 {
>  			compatible = "generic-ehci";
>  			reg = <0x0 0xa7020000 0x0 0x10000>;
>  			interrupt-parent = <&mbigen_usb>;
> diff --git a/arch/arm64/boot/dts/hisilicon/hip07.dtsi 
> b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
> index 4773a533fce5..93f99a5255ac 100644
> --- a/arch/arm64/boot/dts/hisilicon/hip07.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hip07.dtsi
> @@ -1253,7 +1253,7 @@ uart0: uart@602b0000 {
>  			status = "disabled";
>  		};
> 
> -		usb_ohci: ohci@a7030000 {
> +		usb_ohci: usb@a7030000 {
>  			compatible = "generic-ohci";
>  			reg = <0x0 0xa7030000 0x0 0x10000>;
>  			interrupt-parent = <&mbigen_usb>;
> @@ -1262,7 +1262,7 @@ usb_ohci: ohci@a7030000 {
>  			status = "disabled";
>  		};
> 
> -		usb_ehci: ehci@a7020000 {
> +		usb_ehci: usb@a7020000 {
>  			compatible = "generic-ehci";
>  			reg = <0x0 0xa7020000 0x0 0x10000>;
>  			interrupt-parent = <&mbigen_usb>;
> diff --git a/arch/mips/boot/dts/ingenic/jz4740.dtsi 
> b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> index 1520585c235c..b989ff62ffbc 100644
> --- a/arch/mips/boot/dts/ingenic/jz4740.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4740.dtsi
> @@ -281,7 +281,7 @@ dmac: dma-controller@13020000 {
>  		clocks = <&cgu JZ4740_CLK_DMA>;
>  	};
> 
> -	uhc: uhc@13030000 {
> +	uhc: usb@13030000 {
>  		compatible = "ingenic,jz4740-ohci", "generic-ohci";
>  		reg = <0x13030000 0x1000>;
> 
> diff --git a/arch/mips/boot/dts/ingenic/jz4770.dtsi 
> b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> index fa11ac950499..e45c03038826 100644
> --- a/arch/mips/boot/dts/ingenic/jz4770.dtsi
> +++ b/arch/mips/boot/dts/ingenic/jz4770.dtsi
> @@ -417,7 +417,7 @@ dmac1: dma-controller@13420100 {
>  		interrupts = <23>;
>  	};
> 
> -	uhc: uhc@13430000 {
> +	uhc: usb@13430000 {
>  		compatible = "generic-ohci";
>  		reg = <0x13430000 0x1000>;
> 
> diff --git a/arch/mips/boot/dts/mti/sead3.dts 
> b/arch/mips/boot/dts/mti/sead3.dts
> index 192c26ff1d3d..1cf6728af8fe 100644
> --- a/arch/mips/boot/dts/mti/sead3.dts
> +++ b/arch/mips/boot/dts/mti/sead3.dts
> @@ -56,7 +56,7 @@ gic: interrupt-controller@1b1c0000 {
>  		interrupt-parent = <&cpu_intc>;
>  	};
> 
> -	ehci@1b200000 {
> +	usb@1b200000 {
>  		compatible = "generic-ehci";
>  		reg = <0x1b200000 0x1000>;
> 
> diff --git a/arch/mips/boot/dts/ralink/mt7628a.dtsi 
> b/arch/mips/boot/dts/ralink/mt7628a.dtsi
> index 892e8ab863c5..45bf96a3d17a 100644
> --- a/arch/mips/boot/dts/ralink/mt7628a.dtsi
> +++ b/arch/mips/boot/dts/ralink/mt7628a.dtsi
> @@ -275,7 +275,7 @@ usb_phy: usb-phy@10120000 {
>  		reset-names = "host", "device";
>  	};
> 
> -	ehci@101c0000 {
> +	usb@101c0000 {
>  		compatible = "generic-ehci";
>  		reg = <0x101c0000 0x1000>;
> 
> diff --git a/arch/powerpc/boot/dts/akebono.dts 
> b/arch/powerpc/boot/dts/akebono.dts
> index df18f8dc4642..343326c30380 100644
> --- a/arch/powerpc/boot/dts/akebono.dts
> +++ b/arch/powerpc/boot/dts/akebono.dts
> @@ -126,7 +126,7 @@ SATA0: sata@30000010000 {
>  			interrupts = <93 2>;
>  		};
> 
> -		EHCI0: ehci@30010000000 {
> +		EHCI0: usb@30010000000 {
>  			compatible = "ibm,476gtr-ehci", "generic-ehci";
>  			reg = <0x300 0x10000000 0x0 0x10000>;
>  			interrupt-parent = <&MPIC>;
> @@ -140,14 +140,14 @@ SD0: sd@30000000000 {
>  			interrupt-parent = <&MPIC>;
>  		};
> 
> -		OHCI0: ohci@30010010000 {
> +		OHCI0: usb@30010010000 {
>  			compatible = "ibm,476gtr-ohci", "generic-ohci";
>  			reg = <0x300 0x10010000 0x0 0x10000>;
>  			interrupt-parent = <&MPIC>;
>  			interrupts = <89 1>;
>  			};
> 
> -		OHCI1: ohci@30010020000 {
> +		OHCI1: usb@30010020000 {
>  			compatible = "ibm,476gtr-ohci", "generic-ohci";
>  			reg = <0x300 0x10020000 0x0 0x10000>;
>  			interrupt-parent = <&MPIC>;
> --
> 2.27.0
> 



  parent reply index

Thread overview: 73+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-14 10:13 [PATCH 00/20] dt-bindings: usb: Add generic USB HCD, xHCI, DWC USB3 DT schema Serge Semin
2020-10-14 10:13 ` [PATCH 01/20] dt-bindings: usb: usb-hcd: Convert generic USB properties to " Serge Semin
2020-10-16 18:33   ` Rob Herring
2020-10-14 10:13 ` [PATCH 02/20] dt-bindings: usb: usb-hcd: Add "otg-rev" property restriction Serge Semin
2020-10-16 18:33   ` Rob Herring
2020-10-14 10:13 ` [PATCH 03/20] dt-bindings: usb: usb-hcd: Add "ulpi/serial/hsic" PHY types Serge Semin
2020-10-16 18:34   ` Rob Herring
2020-10-14 10:13 ` [PATCH 04/20] dt-bindings: usb: usb-hcd: Add "tpl-support" property Serge Semin
2020-10-14 13:27   ` Rob Herring
2020-10-14 17:27     ` Serge Semin
2020-10-16 15:44       ` Rob Herring
2020-10-16 18:47   ` Rob Herring
2020-10-14 10:13 ` [PATCH 05/20] dt-bindings: usb: usb-hcd: Add generic "usb-phy" property Serge Semin
2020-10-16 18:47   ` Rob Herring
2020-10-14 10:13 ` [PATCH 06/20] dt-bindings: usb: Convert xHCI bindings to DT schema Serge Semin
2020-10-16 18:49   ` Rob Herring
2020-10-14 10:13 ` [PATCH 07/20] dt-bindings: usb: xhci: Add Broadcom STB v2 compatible device Serge Semin
2020-10-15 16:39   ` Florian Fainelli
2020-10-16 18:49   ` Rob Herring
2020-10-14 10:13 ` [PATCH 08/20] dt-bindings: usb: renesas-xhci: Refer to the usb-xhci.yaml file Serge Semin
2020-10-16 18:50   ` Rob Herring
2020-10-20  4:42   ` Yoshihiro Shimoda
2020-10-14 10:13 ` [PATCH 09/20] dt-bindings: usb: Convert DWC USB3 bindings to DT schema Serge Semin
2020-10-14 13:32   ` Rob Herring
2020-10-14 17:37     ` Serge Semin
2020-10-14 10:13 ` [PATCH 10/20] dt-bindings: usb: dwc3: Add interrupt-names property support Serge Semin
2020-10-16 18:50   ` Rob Herring
2020-10-14 10:13 ` [PATCH 11/20] dt-bindings: usb: dwc3: Add synopsys,dwc3 compatible string Serge Semin
2020-10-14 20:18   ` Krzysztof Kozlowski
2020-10-14 21:35     ` Serge Semin
2020-10-16 18:53       ` Rob Herring
2020-10-19 16:22         ` Serge Semin
2020-10-14 10:13 ` [PATCH 12/20] dt-bindings: usb: dwc3: Add Tx De-emphasis restrictions Serge Semin
2020-10-16 18:54   ` Rob Herring
2020-10-14 10:13 ` [PATCH 13/20] dt-bindings: usb: dwc3: Add Frame Length Adj restrictions Serge Semin
2020-10-16 18:54   ` Rob Herring
2020-10-14 10:13 ` [PATCH 14/20] dt-bindings: usb: meson-g12a-usb: Fix FL-adj property value Serge Semin
2020-10-16 18:54   ` Rob Herring
2020-10-16 20:46   ` Martin Blumenstingl
2020-10-14 10:13 ` [PATCH 15/20] dt-bindings: usb: meson-g12a-usb: Validate DWC2/DWC3 sub-nodes Serge Semin
2020-10-16 18:54   ` Rob Herring
2020-10-16 20:47   ` Martin Blumenstingl
2020-10-14 10:13 ` [PATCH 16/20] dt-bindings: usb: keystone-dwc3: Validate DWC3 sub-node Serge Semin
2020-10-16 18:55   ` Rob Herring
2020-10-14 10:13 ` [PATCH 17/20] dt-bindings: usb: qcom,dwc3: " Serge Semin
2020-10-16 18:55   ` Rob Herring
2020-10-14 10:14 ` [PATCH 18/20] arch: dts: Fix EHCI/OHCI DT nodes name Serge Semin
2020-10-14 18:00   ` Florian Fainelli
2020-10-14 18:11     ` Serge Semin
2020-10-14 18:41       ` Florian Fainelli
2020-10-14 21:21         ` Serge Semin
2020-10-14 18:56   ` Paul Cercueil [this message]
2020-10-14 19:12     ` Alexey Brodkin
2020-10-15  8:05   ` Amelie DELAUNAY
2020-10-15 16:37   ` Florian Fainelli
2020-10-16  7:08   ` Alexandre Torgue
2020-10-16  8:52     ` Serge Semin
2020-10-14 10:14 ` [PATCH 19/20] arch: dts: Fix xHCI " Serge Semin
2020-10-14 10:14 ` [PATCH 20/20] arch: dts: Fix DWC USB3 " Serge Semin
2020-10-14 10:33   ` Krzysztof Kozlowski
2020-10-14 17:16     ` Serge Semin
2020-10-14 20:04       ` Krzysztof Kozlowski
2020-10-14 23:51         ` Serge Semin
2020-10-15  6:14           ` Krzysztof Kozlowski
2020-10-15 14:15             ` Serge Semin
2020-10-14 14:09   ` Felipe Balbi
2020-10-14 14:37     ` Serge Semin
2020-10-14 18:35       ` Rob Herring
2020-10-14 21:22         ` Serge Semin
2020-10-15 10:15       ` Felipe Balbi
2020-10-15 13:53         ` Serge Semin
2020-10-15 14:04         ` Maxime Ripard
2020-10-14 17:39 ` [PATCH 00/20] dt-bindings: usb: Add generic USB HCD, xHCI, DWC USB3 DT schema Serge Semin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=DLG7IQ.15UXZI2H6RYC3@crapouillou.net \
    --to=paul@crapouillou.net \
    --cc=Alexey.Malahov@baikalelectronics.ru \
    --cc=Pavel.Parkhomenko@baikalelectronics.ru \
    --cc=Sergey.Semin@baikalelectronics.ru \
    --cc=abrodkin@synopsys.com \
    --cc=agross@kernel.org \
    --cc=alexandre.torgue@st.com \
    --cc=balbi@kernel.org \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=benh@kernel.crashing.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=fancer.lancer@gmail.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=hauke@hauke-m.de \
    --cc=khilman@baylibre.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mips@vger.kernel.org \
    --cc=linux-snps-arc@lists.infradead.org \
    --cc=linux-stm32@st-md-mailman.stormreply.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=mathias.nyman@intel.com \
    --cc=matthias.bgg@gmail.com \
    --cc=mcoquelin.stm32@gmail.com \
    --cc=mgautam@codeaurora.org \
    --cc=mpe@ellerman.id.au \
    --cc=narmstrong@baylibre.com \
    --cc=paulus@samba.org \
    --cc=prabhakar.mahadev-lad.rj@bp.renesas.com \
    --cc=robh+dt@kernel.org \
    --cc=rogerq@ti.com \
    --cc=tsbogend@alpha.franken.de \
    --cc=vgupta@synopsys.com \
    --cc=vz@mleia.com \
    --cc=xuwei5@hisilicon.com \
    --cc=yoshihiro.shimoda.uh@renesas.com \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git