From: Paul Cercueil <paul@crapouillou.net>
To: 周琰杰 <zhouyanjie@wanyeetech.com>
Cc: gregkh@linuxfoundation.org, robh+dt@kernel.org,
hminas@synopsys.com, devicetree@vger.kernel.org,
linux-usb@vger.kernel.org, linux-mips@vger.kernel.org,
linux-kernel@vger.kernel.org, dongsheng.qiu@ingenic.com,
aric.pzqi@ingenic.com, rick.tyliu@ingenic.com,
sihui.liu@ingenic.com, jun.jiang@ingenic.com,
sernia.zhou@foxmail.com,
"Dragan Čečavac" <dragancecavac@yahoo.com>
Subject: Re: [PATCH 2/2] USB: dwc2: Add OTG support for Ingenic SoCs.
Date: Sat, 24 Jul 2021 11:49:30 +0100 [thread overview]
Message-ID: <IQWQWQ.9EAMZ76IPL892@crapouillou.net> (raw)
In-Reply-To: <1627116521-124612-3-git-send-email-zhouyanjie@wanyeetech.com>
Hi Zhou,
Le sam., juil. 24 2021 at 16:48:41 +0800, 周琰杰 (Zhou Yanjie)
<zhouyanjie@wanyeetech.com> a écrit :
> Add OTG support for the JZ4775 SoC, the JZ4780 SoC, the X1000
> SoC, the X1600 SoC, the X1830 SoC, and the X2000 SoC. Introduce
> support for disable Ingenic overcurrent detection, once selected
> it enables GOTGCTL register bits VbvalidOvEn and VbvalidOvVal to
> disable the VBUS overcurrent detection.
>
> This patch is derived from Dragan Čečavac (in the kernel 3.18.3
> tree of CI20). It is very useful for the MIPS Creator CI20 (r1).
> Without this patch, OTG port of CI20 has a great probability to
> face overcurrent warning, which breaks the OTG functionality.
>
> Signed-off-by: Dragan Čečavac <dragancecavac@yahoo.com>
> Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
> ---
> drivers/usb/dwc2/core.c | 9 +++++++++
> drivers/usb/dwc2/core.h | 5 +++++
> drivers/usb/dwc2/params.c | 49
> ++++++++++++++++++++++++++++++++++++++++++++++-
> 3 files changed, 62 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
> index 272ae57..c35b2e2 100644
> --- a/drivers/usb/dwc2/core.c
> +++ b/drivers/usb/dwc2/core.c
> @@ -1153,6 +1153,7 @@ static void dwc2_set_turnaround_time(struct
> dwc2_hsotg *hsotg)
> int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
> {
> u32 usbcfg;
> + u32 otgctl;
> int retval = 0;
>
> if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
> @@ -1187,6 +1188,14 @@ int dwc2_phy_init(struct dwc2_hsotg *hsotg,
> bool select_phy)
> dwc2_writel(hsotg, usbcfg, GUSBCFG);
> }
>
> + if (hsotg->params.deactivate_ingenic_overcurrent_detection) {
> + if (dwc2_is_host_mode(hsotg)) {
> + otgctl = readl(hsotg->regs + GOTGCTL);
> + otgctl |= GOTGCTL_VBVALOEN | GOTGCTL_VBVALOVAL;
> + writel(otgctl, hsotg->regs + GOTGCTL);
> + }
> + }
> +
> return retval;
> }
>
> diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
> index ab6b815..e026d13 100644
> --- a/drivers/usb/dwc2/core.h
> +++ b/drivers/usb/dwc2/core.h
> @@ -418,6 +418,10 @@ enum dwc2_ep0_state {
> * detection using GGPIO register.
> * 0 - Deactivate the external level detection (default)
> * 1 - Activate the external level detection
> + * @deactivate_ingenic_overcurrent_detection: Deactivate Ingenic
> overcurrent
> + * detection.
> + * 0 - Activate the overcurrent detection (default)
> + * 1 - Deactivate the overcurrent detection
> * @g_dma: Enables gadget dma usage (default:
> autodetect).
> * @g_dma_desc: Enables gadget descriptor DMA (default:
> autodetect).
> * @g_rx_fifo_size: The periodic rx fifo size for the device, in
> @@ -489,6 +493,7 @@ struct dwc2_core_params {
> u8 hird_threshold;
> bool activate_stm_fs_transceiver;
> bool activate_stm_id_vb_detection;
> + bool deactivate_ingenic_overcurrent_detection;
> bool ipg_isoc_en;
> u16 max_packet_count;
> u32 max_transfer_size;
> diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
> index 67c5eb1..a7a1b50 100644
> --- a/drivers/usb/dwc2/params.c
> +++ b/drivers/usb/dwc2/params.c
> @@ -71,6 +71,47 @@ static void dwc2_set_his_params(struct dwc2_hsotg
> *hsotg)
> p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
> }
>
> +static void dwc2_set_jz4775_params(struct dwc2_hsotg *hsotg)
> +{
> + struct dwc2_core_params *p = &hsotg->params;
> +
> + p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
> + p->speed = DWC2_SPEED_PARAM_HIGH;
> + p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
> + p->phy_utmi_width = 16;
> + p->deactivate_ingenic_overcurrent_detection =
> + device_property_read_bool(hsotg->dev, "disable-over-current");
That device property was not documented in the previous patch. Also
this probably should be "ingenic,disable-over-current".
Cheers,
-Paul
> +}
> +
> +static void dwc2_set_x1600_params(struct dwc2_hsotg *hsotg)
> +{
> + struct dwc2_core_params *p = &hsotg->params;
> +
> + p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
> + p->speed = DWC2_SPEED_PARAM_HIGH;
> + p->host_channels = 16;
> + p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
> + p->phy_utmi_width = 16;
> + p->deactivate_ingenic_overcurrent_detection =
> + device_property_read_bool(hsotg->dev, "disable-over-current");
> +}
> +
> +static void dwc2_set_x2000_params(struct dwc2_hsotg *hsotg)
> +{
> + struct dwc2_core_params *p = &hsotg->params;
> +
> + p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
> + p->speed = DWC2_SPEED_PARAM_HIGH;
> + p->host_rx_fifo_size = 1024;
> + p->host_nperio_tx_fifo_size = 1024;
> + p->host_perio_tx_fifo_size = 1024;
> + p->host_channels = 16;
> + p->phy_type = DWC2_PHY_TYPE_PARAM_UTMI;
> + p->phy_utmi_width = 16;
> + p->deactivate_ingenic_overcurrent_detection =
> + device_property_read_bool(hsotg->dev, "disable-over-current");
> +}
> +
> static void dwc2_set_s3c6400_params(struct dwc2_hsotg *hsotg)
> {
> struct dwc2_core_params *p = &hsotg->params;
> @@ -202,7 +243,13 @@ static void
> dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg)
>
> const struct of_device_id dwc2_of_match_table[] = {
> { .compatible = "brcm,bcm2835-usb", .data = dwc2_set_bcm_params },
> - { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params
> },
> + { .compatible = "hisilicon,hi6220-usb", .data = dwc2_set_his_params
> },
> + { .compatible = "ingenic,jz4775-otg", .data =
> dwc2_set_jz4775_params },
> + { .compatible = "ingenic,jz4780-otg", .data =
> dwc2_set_jz4775_params },
> + { .compatible = "ingenic,x1000-otg", .data = dwc2_set_jz4775_params
> },
> + { .compatible = "ingenic,x1600-otg", .data = dwc2_set_x1600_params
> },
> + { .compatible = "ingenic,x1830-otg", .data = dwc2_set_x1600_params
> },
> + { .compatible = "ingenic,x2000-otg", .data = dwc2_set_x2000_params
> },
> { .compatible = "rockchip,rk3066-usb", .data = dwc2_set_rk_params },
> { .compatible = "lantiq,arx100-usb", .data = dwc2_set_ltq_params },
> { .compatible = "lantiq,xrx200-usb", .data = dwc2_set_ltq_params },
> --
> 2.7.4
>
next prev parent reply other threads:[~2021-07-24 10:49 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-24 8:48 [PATCH 0/2] Add OTG support for Ingenic SoCs 周琰杰 (Zhou Yanjie)
2021-07-24 8:48 ` [PATCH 1/2] dt-bindings: dwc2: Add bindings for new " 周琰杰 (Zhou Yanjie)
2021-07-24 10:46 ` Paul Cercueil
2021-07-24 12:52 ` Zhou Yanjie
2021-07-25 10:31 ` Paul Cercueil
2021-07-30 9:33 ` Zhou Yanjie
2021-07-29 21:38 ` Rob Herring
2021-07-24 8:48 ` [PATCH 2/2] USB: dwc2: Add OTG support for " 周琰杰 (Zhou Yanjie)
2021-07-24 10:49 ` Paul Cercueil [this message]
2021-07-24 13:05 ` Zhou Yanjie
2021-07-24 13:24 ` Felipe Balbi
2022-04-12 16:45 ` Zhou Yanjie
2021-07-27 14:27 ` Greg KH
2021-07-30 9:34 ` Zhou Yanjie
2021-07-30 6:33 ` Minas Harutyunyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=IQWQWQ.9EAMZ76IPL892@crapouillou.net \
--to=paul@crapouillou.net \
--cc=aric.pzqi@ingenic.com \
--cc=devicetree@vger.kernel.org \
--cc=dongsheng.qiu@ingenic.com \
--cc=dragancecavac@yahoo.com \
--cc=gregkh@linuxfoundation.org \
--cc=hminas@synopsys.com \
--cc=jun.jiang@ingenic.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mips@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=rick.tyliu@ingenic.com \
--cc=robh+dt@kernel.org \
--cc=sernia.zhou@foxmail.com \
--cc=sihui.liu@ingenic.com \
--cc=zhouyanjie@wanyeetech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).