Linux-USB Archive on lore.kernel.org
 help / color / Atom feed
From: Steven Haigh <netwiz@crc.id.au>
To: linux-usb@vger.kernel.org
Subject: Slow USB init on 5.8.9 / 5.8.14 / 5.9.0
Date: Fri, 16 Oct 2020 10:17:16 +1100
Message-ID: <SCN9IQ.KCG4KDJJ6OC73@crc.id.au> (raw)


[-- Attachment #1: Type: text/plain, Size: 2575 bytes --]

Hi all,

I've trying to debug a problem I've noticed with the Fedora 33 Beta, 
that seems to be related to USB ports.

I tried even with the 5.9.0 kernel from the rawhide / fc34 tree, but 
the same problem occurs.

I've added an example dmesg from a boot with USB problems, and I've 
noticed that systemd-analyze blame shows:
47.297s dracut-initqueue.service

I notice that when I get this issue, on booting, the BIOS will init all 
the USB devices, and the light on each USB port on my hub comes on 
together. When the kernel boots, all the lights on the USB hub goes off 
and then either don't light up at all, or there is about 5-6 seconds 
between each port coming online.

The system is a Ryzen 2700x with an MSI X470 GAMING PRO CARBON 
(MS-7B78) mainboard.

Output of lsusb:
Bus 004 Device 004: ID 0bda:0411 Realtek Semiconductor Corp. Hub
Bus 004 Device 002: ID 0bda:0411 Realtek Semiconductor Corp. Hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 007: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 
DVB-T
Bus 003 Device 013: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 011: ID 045e:0008 Microsoft Corp. SideWinder Precision 
Pro
Bus 003 Device 010: ID 046d:0a01 Logitech, Inc. USB Headset
Bus 003 Device 008: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth 
Dongle (HCI mode)
Bus 003 Device 005: ID 2109:2811 VIA Labs, Inc. Hub
Bus 003 Device 003: ID 03f0:7d04 HP, Inc DeskJet F2100 Printer series
Bus 003 Device 004: ID 0bda:5411 Realtek Semiconductor Corp. RTS5411 Hub
Bus 003 Device 002: ID 0bda:5411 Realtek Semiconductor Corp. RTS5411 Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 058f:6364 Alcor Micro Corp. AU6477 Card Reader 
Controller
Bus 001 Device 004: ID 13fd:160f Initio Corporation RocketFish SATA 
Bridge [INIC-1611]
Bus 001 Device 002: ID 1a40:0101 Terminus Technology Inc. Hub
Bus 001 Device 007: ID 1050:0407 Yubico.com Yubikey 4/5 OTP+U2F+CCID
Bus 001 Device 005: ID 1532:0228 Razer USA, Ltd BlackWidow Elite
Bus 001 Device 003: ID 1b1c:0c04 Corsair Link Cooling Node
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

I do note that my USB keyboard still works when this fault occurs, so 
it does seem to be something specific to either that controller, or the 
USB hubs attached (or both).

Where abouts do we start with something like this?

Steven Haigh

📧 netwiz@crc.id.au
💻 https://www.crc.id.au


[-- Attachment #2: usbfail-5.9.0-fc34.txt --]
[-- Type: text/plain, Size: 104103 bytes --]

[    0.000000] Linux version 5.9.0-36.fc34.x86_64 (mockbuild@bkernel01.iad2.fedoraproject.org) (gcc (GCC) 10.2.1 20201005 (Red Hat 10.2.1-5), GNU ld version 2.35.1-5.fc34) #1 SMP Mon Oct 12 13:40:33 UTC 2020
[    0.000000] Command line: BOOT_IMAGE=(hd2,gpt2)/vmlinuz-5.9.0-36.fc34.x86_64 root=UUID=759df463-2274-4c2a-8a25-f18f862d9db5 ro rootflags=subvol=root rhgb quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000dbc4afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dbc4b000-0x00000000dbdbafff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dbdbb000-0x00000000dbf3cfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dbf3d000-0x00000000dc353fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dc354000-0x00000000dcfcbfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dcfcc000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000081f37ffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xd7ff5018-0xd8004057] usable ==> usable
[    0.000000] e820: update [mem 0xd7ff5018-0xd8004057] usable ==> usable
[    0.000000] e820: update [mem 0xd7fdb018-0xd7ff4457] usable ==> usable
[    0.000000] e820: update [mem 0xd7fdb018-0xd7ff4457] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000009d7ffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000a000000-0x000000000a1fffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000000a20b000-0x000000000affffff] usable
[    0.000000] reserve setup_data: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[    0.000000] reserve setup_data: [mem 0x000000000b020000-0x00000000d7fdb017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d7fdb018-0x00000000d7ff4457] usable
[    0.000000] reserve setup_data: [mem 0x00000000d7ff4458-0x00000000d7ff5017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d7ff5018-0x00000000d8004057] usable
[    0.000000] reserve setup_data: [mem 0x00000000d8004058-0x00000000dbc4afff] usable
[    0.000000] reserve setup_data: [mem 0x00000000dbc4b000-0x00000000dbdbafff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000dbdbb000-0x00000000dbf3cfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000dbf3d000-0x00000000dc353fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000dc354000-0x00000000dcfcbfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000dcfcc000-0x00000000deffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000081f37ffff] usable
[    0.000000] efi: EFI v2.70 by American Megatrends
[    0.000000] efi: ACPI 2.0=0xdc2d0000 ACPI=0xdc2d0000 SMBIOS=0xdce17000 MEMATTR=0xd8106698 ESRT=0xd86faf98 RNG=0xdce31f18 
[    0.000000] efi: seeding entropy pool
[    0.000000] secureboot: Secure boot disabled
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: Micro-Star International Co., Ltd. MS-7B78/X470 GAMING PRO CARBON (MS-7B78), BIOS 2.E3 06/12/2020
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] last_pfn = 0x81f380 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000820000000 aka 33280M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000d86faf98 to 0x00000000d86fafd0.
[    0.000000] e820: update [mem 0xd86fa000-0xd86fafff] usable ==> reserved
[    0.000000] Using GB pages for direct mapping
[    0.000000] secureboot: Secure boot disabled
[    0.000000] RAMDISK: [mem 0x5a423000-0x5cd3cfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DC2D0000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DC2D0098 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DC2D78E0 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DC2D01E8 0076F1 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000DC33CE00 000040
[    0.000000] ACPI: APIC 0x00000000DC2D79F8 00015E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DC2D7B58 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000DC2D7BA0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DC2D7C40 0000FC (v02 ALASKA CPUSSDT  01072009 AMI  01072009)
[    0.000000] ACPI: SSDT 0x00000000DC2D7D40 008C98 (v02 AMD    AMD ALIB 00000002 MSFT 04000000)
[    0.000000] ACPI: SSDT 0x00000000DC2E09D8 003776 (v01 AMD    AMD AOD  00000001 INTL 20120913)
[    0.000000] ACPI: MCFG 0x00000000DC2E4150 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000DC2E4190 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: SSDT 0x00000000DC2E41C8 000024 (v01 AMDFCH FCHZP    00001000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000DC2E41F0 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.000000] ACPI: IVRS 0x00000000DC2E4238 0000D0 (v02 AMD    AMD IVRS 00000001 AMD  00000000)
[    0.000000] ACPI: SSDT 0x00000000DC2E4308 002314 (v01 AMD    AMD CPU  00000001 AMD  00000001)
[    0.000000] ACPI: CRAT 0x00000000DC2E6620 000F50 (v01 AMD    AMD CRAT 00000001 AMD  00000001)
[    0.000000] ACPI: CDIT 0x00000000DC2E7570 000029 (v01 AMD    AMD CDIT 00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000DC2E75A0 001D4A (v01 AMD    AmdTable 00000001 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000DC2E92F0 0000BF (v01 AMD    AMD PT   00001000 INTL 20120913)
[    0.000000] ACPI: WSMT 0x00000000DC2E93B0 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000081f37ffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x81f355000-0x81f37ffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000081f37ffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000009d7ffff]
[    0.000000]   node   0: [mem 0x000000000a000000-0x000000000a1fffff]
[    0.000000]   node   0: [mem 0x000000000a20b000-0x000000000affffff]
[    0.000000]   node   0: [mem 0x000000000b020000-0x00000000dbc4afff]
[    0.000000]   node   0: [mem 0x00000000dbdbb000-0x00000000dbf3cfff]
[    0.000000]   node   0: [mem 0x00000000dcfcc000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000081f37ffff]
[    0.000000] Zeroed struct page in unavailable ranges: 12683 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000081f37ffff]
[    0.000000] On node 0 totalpages: 8375925
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 29 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14126 pages used for memmap
[    0.000000]   DMA32 zone: 904022 pages, LIFO batch:63
[    0.000000]   Normal zone: 116686 pages used for memmap
[    0.000000]   Normal zone: 7467904 pages, LIFO batch:63
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 17, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 18, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 32 CPUs, 16 hotplug CPUs
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x09d80000-0x09ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20afff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd7fdb000-0xd7fdbfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd7ff4000-0xd7ff4fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd7ff5000-0xd7ff5fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd8004000-0xd8004fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xd86fa000-0xd86fafff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xdbc4b000-0xdbdbafff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xdbf3d000-0xdc353fff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xdc354000-0xdcfcbfff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[    0.000000] PM: hibernation: Registered nosave memory: [mem 0xfd000000-0xffffffff]
[    0.000000] [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:32 nr_cpu_ids:32 nr_node_ids:1
[    0.000000] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s184320 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
[    0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8245020
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=(hd2,gpt2)/vmlinuz-5.9.0-36.fc34.x86_64 root=UUID=759df463-2274-4c2a-8a25-f18f862d9db5 ro rootflags=subvol=root rhgb quiet
[    0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 32677804K/33503700K available (14339K kernel code, 2523K rwdata, 8740K rodata, 2512K init, 4584K bss, 825636K reserved, 0K cma-reserved)
[    0.000000] random: get_random_u64 called from __kmem_cache_create+0x2e/0x550 with crng_init=0
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[    0.000000] ftrace: allocating 44194 entries in 173 pages
[    0.000000] ftrace: allocated 173 pages with 5 groups
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=32.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Rude variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[    0.000000] NR_IRQS: 524544, nr_irqs: 1224, preallocated irqs: 16
[    0.000000] random: crng done (trusting CPU's manufacturer)
[    0.000000] Console: colour dummy device 80x25
[    0.000000] printk: console [tty0] enabled
[    0.000000] ACPI: Core revision 20200717
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.002000] Switched APIC routing to physical flat.
[    0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.012000] tsc: Unable to calibrate against PIT
[    0.012000] tsc: using HPET reference calibration
[    0.012000] tsc: Detected 3699.628 MHz processor
[    0.000002] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6aa7ed12073, max_idle_ns: 881590475095 ns
[    0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 7399.25 BogoMIPS (lpj=3699628)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.003028] LSM: Security Framework initializing
[    0.003037] Yama: becoming mindful.
[    0.003041] SELinux:  Initializing.
[    0.003101] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.003142] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.003362] LVT offset 1 assigned for vector 0xf9
[    0.003414] LVT offset 2 assigned for vector 0xf4
[    0.003427] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[    0.003428] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[    0.003430] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.003431] Spectre V2 : Mitigation: Full AMD retpoline
[    0.003431] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.003432] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.003433] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.003615] Freeing SMP alternatives memory: 40K
[    0.108255] smpboot: CPU0: AMD Ryzen 7 2700X Eight-Core Processor (family: 0x17, model: 0x8, stepping: 0x2)
[    0.108351] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[    0.108354] ... version:                0
[    0.108354] ... bit width:              48
[    0.108354] ... generic registers:      6
[    0.108355] ... value mask:             0000ffffffffffff
[    0.108355] ... max period:             00007fffffffffff
[    0.108355] ... fixed-purpose events:   0
[    0.108356] ... event mask:             000000000000003f
[    0.108382] rcu: Hierarchical SRCU implementation.
[    0.108486] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.108673] smp: Bringing up secondary CPUs ...
[    0.108737] x86: Booting SMP configuration:
[    0.108737] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11 #12 #13 #14 #15
[    0.126031] smp: Brought up 1 node, 16 CPUs
[    0.126031] smpboot: Max logical packages: 2
[    0.126031] smpboot: Total of 16 processors activated (118388.09 BogoMIPS)
[    0.128663] devtmpfs: initialized
[    0.128663] x86/mm: Memory block size: 128MB
[    0.130038] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
[    0.130040] PM: Registering ACPI NVS region [mem 0xdbf3d000-0xdc353fff] (4288512 bytes)
[    0.130180] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.130180] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[    0.130180] xor: automatically using best checksumming function   avx       
[    0.130180] pinctrl core: initialized pinctrl subsystem
[    0.130266] PM: RTC time: 04:32:06, date: 2020-10-16
[    0.130370] NET: Registered protocol family 16
[    0.130432] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
[    0.130437] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    0.130442] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    0.130446] audit: initializing netlink subsys (disabled)
[    0.130454] audit: type=2000 audit(1602822726.142:1): state=initialized audit_enabled=0 res=1
[    0.130454] thermal_sys: Registered thermal governor 'fair_share'
[    0.130454] thermal_sys: Registered thermal governor 'bang_bang'
[    0.130454] thermal_sys: Registered thermal governor 'step_wise'
[    0.130454] thermal_sys: Registered thermal governor 'user_space'
[    0.130454] cpuidle: using governor menu
[    0.130454] ACPI: bus type PCI registered
[    0.130454] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.131007] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.131009] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.131016] PCI: Using configuration type 1 for base access
[    0.132257] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.132257] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.214135] cryptd: max_cpu_qlen set to 1000
[    0.216272] alg: No test for 842 (842-generic)
[    0.216272] alg: No test for 842 (842-scomp)
[    0.218046] raid6: skip pq benchmark and using algorithm avx2x4
[    0.218046] raid6: using avx2x2 recovery algorithm
[    0.218084] ACPI: Added _OSI(Module Device)
[    0.218084] ACPI: Added _OSI(Processor Device)
[    0.218085] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.218085] ACPI: Added _OSI(Processor Aggregator Device)
[    0.218086] ACPI: Added _OSI(Linux-Dell-Video)
[    0.218086] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.218087] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.224582] ACPI: 8 ACPI AML tables successfully acquired and loaded
[    0.225436] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.227159] ACPI: Interpreter enabled
[    0.227170] ACPI: (supports S0 S3 S4 S5)
[    0.227171] ACPI: Using IOAPIC for interrupt routing
[    0.227385] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.227559] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.231837] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.231840] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
[    0.231938] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PME LTR DPC]
[    0.232034] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability]
[    0.232041] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.232228] PCI host bridge to bus 0000:00
[    0.232229] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.232230] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.232230] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.232231] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.232232] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.232232] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.232233] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfec2ffff window]
[    0.232234] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
[    0.232234] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.232242] pci 0000:00:00.0: [1022:1450] type 00 class 0x060000
[    0.232308] pci 0000:00:00.2: [1022:1451] type 00 class 0x080600
[    0.232388] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[    0.232442] pci 0000:00:01.3: [1022:1453] type 01 class 0x060400
[    0.232923] pci 0000:00:01.3: enabling Extended Tags
[    0.233000] pci 0000:00:01.3: PME# supported from D0 D3hot D3cold
[    0.233115] pci 0000:00:02.0: [1022:1452] type 00 class 0x060000
[    0.233178] pci 0000:00:03.0: [1022:1452] type 00 class 0x060000
[    0.233227] pci 0000:00:03.1: [1022:1453] type 01 class 0x060400
[    0.234011] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.234125] pci 0000:00:04.0: [1022:1452] type 00 class 0x060000
[    0.234193] pci 0000:00:07.0: [1022:1452] type 00 class 0x060000
[    0.234242] pci 0000:00:07.1: [1022:1454] type 01 class 0x060400
[    0.234939] pci 0000:00:07.1: enabling Extended Tags
[    0.235012] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
[    0.235124] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[    0.235173] pci 0000:00:08.1: [1022:1454] type 01 class 0x060400
[    0.235930] pci 0000:00:08.1: enabling Extended Tags
[    0.236011] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[    0.236158] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.236365] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.236572] pci 0000:00:18.0: [1022:1460] type 00 class 0x060000
[    0.236608] pci 0000:00:18.1: [1022:1461] type 00 class 0x060000
[    0.236646] pci 0000:00:18.2: [1022:1462] type 00 class 0x060000
[    0.236682] pci 0000:00:18.3: [1022:1463] type 00 class 0x060000
[    0.236718] pci 0000:00:18.4: [1022:1464] type 00 class 0x060000
[    0.236753] pci 0000:00:18.5: [1022:1465] type 00 class 0x060000
[    0.236788] pci 0000:00:18.6: [1022:1466] type 00 class 0x060000
[    0.236824] pci 0000:00:18.7: [1022:1467] type 00 class 0x060000
[    0.238050] pci 0000:03:00.0: [1022:43d0] type 00 class 0x0c0330
[    0.238065] pci 0000:03:00.0: reg 0x10: [mem 0xfcca0000-0xfcca7fff 64bit]
[    0.238097] pci 0000:03:00.0: enabling Extended Tags
[    0.238143] pci 0000:03:00.0: PME# supported from D3hot D3cold
[    0.238225] pci 0000:03:00.1: [1022:43c8] type 00 class 0x010601
[    0.238264] pci 0000:03:00.1: reg 0x24: [mem 0xfcc80000-0xfcc9ffff]
[    0.238270] pci 0000:03:00.1: reg 0x30: [mem 0xfcc00000-0xfcc7ffff pref]
[    0.238275] pci 0000:03:00.1: enabling Extended Tags
[    0.238308] pci 0000:03:00.1: PME# supported from D3hot D3cold
[    0.238367] pci 0000:03:00.2: [1022:43c6] type 01 class 0x060400
[    0.238402] pci 0000:03:00.2: enabling Extended Tags
[    0.238439] pci 0000:03:00.2: PME# supported from D3hot D3cold
[    0.238523] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.238525] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
[    0.238526] pci 0000:00:01.3:   bridge window [mem 0xfca00000-0xfccfffff]
[    0.238594] pci 0000:20:00.0: [1022:43c7] type 01 class 0x060400
[    0.238633] pci 0000:20:00.0: enabling Extended Tags
[    0.238679] pci 0000:20:00.0: PME# supported from D3hot D3cold
[    0.238758] pci 0000:20:01.0: [1022:43c7] type 01 class 0x060400
[    0.238796] pci 0000:20:01.0: enabling Extended Tags
[    0.238843] pci 0000:20:01.0: PME# supported from D3hot D3cold
[    0.239016] pci 0000:20:02.0: [1022:43c7] type 01 class 0x060400
[    0.239055] pci 0000:20:02.0: enabling Extended Tags
[    0.239101] pci 0000:20:02.0: PME# supported from D3hot D3cold
[    0.239180] pci 0000:20:03.0: [1022:43c7] type 01 class 0x060400
[    0.239218] pci 0000:20:03.0: enabling Extended Tags
[    0.239264] pci 0000:20:03.0: PME# supported from D3hot D3cold
[    0.239345] pci 0000:20:04.0: [1022:43c7] type 01 class 0x060400
[    0.239384] pci 0000:20:04.0: enabling Extended Tags
[    0.239430] pci 0000:20:04.0: PME# supported from D3hot D3cold
[    0.239518] pci 0000:03:00.2: PCI bridge to [bus 20-25]
[    0.239522] pci 0000:03:00.2:   bridge window [io  0xf000-0xffff]
[    0.239524] pci 0000:03:00.2:   bridge window [mem 0xfca00000-0xfcbfffff]
[    0.239554] pci 0000:20:00.0: PCI bridge to [bus 21]
[    0.239628] pci 0000:22:00.0: [8086:1539] type 00 class 0x020000
[    0.239657] pci 0000:22:00.0: reg 0x10: [mem 0xfcb00000-0xfcb1ffff]
[    0.239688] pci 0000:22:00.0: reg 0x18: [io  0xf000-0xf01f]
[    0.239704] pci 0000:22:00.0: reg 0x1c: [mem 0xfcb20000-0xfcb23fff]
[    0.239872] pci 0000:22:00.0: PME# supported from D0 D3hot D3cold
[    0.240018] pci 0000:20:01.0: PCI bridge to [bus 22]
[    0.240022] pci 0000:20:01.0:   bridge window [io  0xf000-0xffff]
[    0.240024] pci 0000:20:01.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.240060] pci 0000:20:02.0: PCI bridge to [bus 23]
[    0.240099] pci 0000:20:03.0: PCI bridge to [bus 24]
[    0.240162] pci 0000:25:00.0: [144d:a804] type 00 class 0x010802
[    0.240185] pci 0000:25:00.0: reg 0x10: [mem 0xfca00000-0xfca03fff 64bit]
[    0.240388] pci 0000:25:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x4 link at 0000:20:04.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    0.240454] pci 0000:20:04.0: PCI bridge to [bus 25]
[    0.240460] pci 0000:20:04.0:   bridge window [mem 0xfca00000-0xfcafffff]
[    0.241053] pci 0000:26:00.0: [1002:1478] type 01 class 0x060400
[    0.241063] pci 0000:26:00.0: reg 0x10: [mem 0xfce00000-0xfce03fff]
[    0.241138] pci 0000:26:00.0: PME# supported from D0 D3hot D3cold
[    0.241194] pci 0000:26:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:03.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.241239] pci 0000:00:03.1: PCI bridge to [bus 26-28]
[    0.241241] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.241243] pci 0000:00:03.1:   bridge window [mem 0xfcd00000-0xfcefffff]
[    0.241245] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.241283] pci 0000:27:00.0: [1002:1479] type 01 class 0x060400
[    0.241365] pci 0000:27:00.0: PME# supported from D0 D3hot D3cold
[    0.241449] pci 0000:26:00.0: PCI bridge to [bus 27-28]
[    0.241452] pci 0000:26:00.0:   bridge window [io  0xe000-0xefff]
[    0.241454] pci 0000:26:00.0:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    0.241458] pci 0000:26:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.241500] pci 0000:28:00.0: [1002:731f] type 00 class 0x030000
[    0.241513] pci 0000:28:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.241522] pci 0000:28:00.0: reg 0x18: [mem 0xf0000000-0xf01fffff 64bit pref]
[    0.241527] pci 0000:28:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.241533] pci 0000:28:00.0: reg 0x24: [mem 0xfcd00000-0xfcd7ffff]
[    0.241539] pci 0000:28:00.0: reg 0x30: [mem 0xfcd80000-0xfcd9ffff pref]
[    0.241550] pci 0000:28:00.0: BAR 0: assigned to efifb
[    0.241608] pci 0000:28:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.241672] pci 0000:28:00.0: 126.016 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x16 link at 0000:00:03.1 (capable of 252.048 Gb/s with 16.0 GT/s PCIe x16 link)
[    0.241704] pci 0000:28:00.1: [1002:ab38] type 00 class 0x040300
[    0.241714] pci 0000:28:00.1: reg 0x10: [mem 0xfcda0000-0xfcda3fff]
[    0.241788] pci 0000:28:00.1: PME# supported from D1 D2 D3hot D3cold
[    0.241878] pci 0000:27:00.0: PCI bridge to [bus 28]
[    0.241882] pci 0000:27:00.0:   bridge window [io  0xe000-0xefff]
[    0.241884] pci 0000:27:00.0:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    0.241887] pci 0000:27:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.241959] pci 0000:29:00.0: [1022:145a] type 00 class 0x130000
[    0.241978] pci 0000:29:00.0: enabling Extended Tags
[    0.242051] pci 0000:29:00.2: [1022:1456] type 00 class 0x108000
[    0.242061] pci 0000:29:00.2: reg 0x18: [mem 0xfc800000-0xfc8fffff]
[    0.242067] pci 0000:29:00.2: reg 0x24: [mem 0xfc900000-0xfc901fff]
[    0.242072] pci 0000:29:00.2: enabling Extended Tags
[    0.242142] pci 0000:29:00.3: [1022:145f] type 00 class 0x0c0330
[    0.242150] pci 0000:29:00.3: reg 0x10: [mem 0xfc700000-0xfc7fffff 64bit]
[    0.242166] pci 0000:29:00.3: enabling Extended Tags
[    0.242192] pci 0000:29:00.3: PME# supported from D0 D3hot D3cold
[    0.242249] pci 0000:00:07.1: PCI bridge to [bus 29]
[    0.242252] pci 0000:00:07.1:   bridge window [mem 0xfc700000-0xfc9fffff]
[    0.244039] pci 0000:2a:00.0: [1022:1455] type 00 class 0x130000
[    0.244060] pci 0000:2a:00.0: enabling Extended Tags
[    0.244128] pci 0000:2a:00.2: [1022:7901] type 00 class 0x010601
[    0.244150] pci 0000:2a:00.2: reg 0x24: [mem 0xfcf08000-0xfcf08fff]
[    0.244156] pci 0000:2a:00.2: enabling Extended Tags
[    0.244182] pci 0000:2a:00.2: PME# supported from D3hot D3cold
[    0.244239] pci 0000:2a:00.3: [1022:1457] type 00 class 0x040300
[    0.244245] pci 0000:2a:00.3: reg 0x10: [mem 0xfcf00000-0xfcf07fff]
[    0.244261] pci 0000:2a:00.3: enabling Extended Tags
[    0.244286] pci 0000:2a:00.3: PME# supported from D0 D3hot D3cold
[    0.244346] pci 0000:00:08.1: PCI bridge to [bus 2a]
[    0.244349] pci 0000:00:08.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.244512] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.244550] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.244582] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.244624] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.244660] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.244689] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.244718] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.244747] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.245207] iommu: Default domain type: Translated 
[    0.245207] pci 0000:28:00.0: vgaarb: setting as boot VGA device
[    0.245207] pci 0000:28:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.245207] pci 0000:28:00.0: vgaarb: bridge control possible
[    0.245207] vgaarb: loaded
[    0.245207] SCSI subsystem initialized
[    0.245207] libata version 3.00 loaded.
[    0.245207] ACPI: bus type USB registered
[    0.245207] usbcore: registered new interface driver usbfs
[    0.245207] usbcore: registered new interface driver hub
[    0.245207] usbcore: registered new device driver usb
[    0.245207] pps_core: LinuxPPS API ver. 1 registered
[    0.245207] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.245207] PTP clock support registered
[    0.245207] EDAC MC: Ver: 3.0.0
[    0.245207] Registered efivars operations
[    0.245207] NetLabel: Initializing
[    0.245207] NetLabel:  domain hash size = 128
[    0.245207] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.245207] NetLabel:  unlabeled traffic allowed by default
[    0.245207] PCI: Using ACPI for IRQ routing
[    0.248254] PCI: pci_cache_line_size set to 64 bytes
[    0.248313] Expanded resource Reserved due to conflict with PCI Bus 0000:00
[    0.248313] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
[    0.248314] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[    0.248315] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[    0.248315] e820: reserve RAM buffer [mem 0xd7fdb018-0xd7ffffff]
[    0.248316] e820: reserve RAM buffer [mem 0xd7ff5018-0xd7ffffff]
[    0.248316] e820: reserve RAM buffer [mem 0xd86fa000-0xdbffffff]
[    0.248316] e820: reserve RAM buffer [mem 0xdbc4b000-0xdbffffff]
[    0.248317] e820: reserve RAM buffer [mem 0xdbf3d000-0xdbffffff]
[    0.248317] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.248318] e820: reserve RAM buffer [mem 0x81f380000-0x81fffffff]
[    0.248320] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.248320] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.250035] clocksource: Switched to clocksource tsc-early
[    0.263442] VFS: Disk quotas dquot_6.6.0
[    0.263455] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.263506] pnp: PnP ACPI init
[    0.263604] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.263608] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.263661] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.263780] system 00:02: [io  0x0a00-0x0a0f] has been reserved
[    0.263781] system 00:02: [io  0x0a10-0x0a1f] has been reserved
[    0.263782] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    0.263782] system 00:02: [io  0x0a40-0x0a4f] has been reserved
[    0.263785] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.263936] system 00:03: [io  0x04d0-0x04d1] has been reserved
[    0.263937] system 00:03: [io  0x040b] has been reserved
[    0.263937] system 00:03: [io  0x04d6] has been reserved
[    0.263938] system 00:03: [io  0x0c00-0x0c01] has been reserved
[    0.263939] system 00:03: [io  0x0c14] has been reserved
[    0.263939] system 00:03: [io  0x0c50-0x0c51] has been reserved
[    0.263940] system 00:03: [io  0x0c52] has been reserved
[    0.263941] system 00:03: [io  0x0c6c] has been reserved
[    0.263941] system 00:03: [io  0x0c6f] has been reserved
[    0.263942] system 00:03: [io  0x0cd0-0x0cd1] has been reserved
[    0.263942] system 00:03: [io  0x0cd2-0x0cd3] has been reserved
[    0.263943] system 00:03: [io  0x0cd4-0x0cd5] has been reserved
[    0.263944] system 00:03: [io  0x0cd6-0x0cd7] has been reserved
[    0.263944] system 00:03: [io  0x0cd8-0x0cdf] has been reserved
[    0.263945] system 00:03: [io  0x0800-0x089f] has been reserved
[    0.263945] system 00:03: [io  0x0b00-0x0b0f] has been reserved
[    0.263946] system 00:03: [io  0x0b20-0x0b3f] has been reserved
[    0.263947] system 00:03: [io  0x0900-0x090f] has been reserved
[    0.263947] system 00:03: [io  0x0910-0x091f] has been reserved
[    0.263948] system 00:03: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.263949] system 00:03: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.263950] system 00:03: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.263951] system 00:03: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.263951] system 00:03: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.263952] system 00:03: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.263953] system 00:03: [mem 0xff000000-0xffffffff] has been reserved
[    0.263955] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.264225] pnp: PnP ACPI: found 4 devices
[    0.269582] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.269627] NET: Registered protocol family 2
[    0.269801] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
[    0.269828] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    0.270051] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[    0.270150] TCP: Hash tables configured (established 262144 bind 65536)
[    0.270273] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
[    0.270313] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.270353] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    0.270439] NET: Registered protocol family 1
[    0.270443] NET: Registered protocol family 44
[    0.270455] pci 0000:20:00.0: PCI bridge to [bus 21]
[    0.270465] pci 0000:20:01.0: PCI bridge to [bus 22]
[    0.270467] pci 0000:20:01.0:   bridge window [io  0xf000-0xffff]
[    0.270470] pci 0000:20:01.0:   bridge window [mem 0xfcb00000-0xfcbfffff]
[    0.270476] pci 0000:20:02.0: PCI bridge to [bus 23]
[    0.270484] pci 0000:20:03.0: PCI bridge to [bus 24]
[    0.270492] pci 0000:20:04.0: PCI bridge to [bus 25]
[    0.270496] pci 0000:20:04.0:   bridge window [mem 0xfca00000-0xfcafffff]
[    0.270501] pci 0000:03:00.2: PCI bridge to [bus 20-25]
[    0.270503] pci 0000:03:00.2:   bridge window [io  0xf000-0xffff]
[    0.270505] pci 0000:03:00.2:   bridge window [mem 0xfca00000-0xfcbfffff]
[    0.270511] pci 0000:00:01.3: PCI bridge to [bus 03-25]
[    0.270512] pci 0000:00:01.3:   bridge window [io  0xf000-0xffff]
[    0.270514] pci 0000:00:01.3:   bridge window [mem 0xfca00000-0xfccfffff]
[    0.270517] pci 0000:27:00.0: PCI bridge to [bus 28]
[    0.270519] pci 0000:27:00.0:   bridge window [io  0xe000-0xefff]
[    0.270521] pci 0000:27:00.0:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    0.270523] pci 0000:27:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.270527] pci 0000:26:00.0: PCI bridge to [bus 27-28]
[    0.270528] pci 0000:26:00.0:   bridge window [io  0xe000-0xefff]
[    0.270531] pci 0000:26:00.0:   bridge window [mem 0xfcd00000-0xfcdfffff]
[    0.270533] pci 0000:26:00.0:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.270537] pci 0000:00:03.1: PCI bridge to [bus 26-28]
[    0.270537] pci 0000:00:03.1:   bridge window [io  0xe000-0xefff]
[    0.270539] pci 0000:00:03.1:   bridge window [mem 0xfcd00000-0xfcefffff]
[    0.270540] pci 0000:00:03.1:   bridge window [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.270543] pci 0000:00:07.1: PCI bridge to [bus 29]
[    0.270545] pci 0000:00:07.1:   bridge window [mem 0xfc700000-0xfc9fffff]
[    0.270548] pci 0000:00:08.1: PCI bridge to [bus 2a]
[    0.270549] pci 0000:00:08.1:   bridge window [mem 0xfcf00000-0xfcffffff]
[    0.270553] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.270554] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.270555] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.270555] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.270556] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.270557] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.270557] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfec2ffff window]
[    0.270558] pci_bus 0000:00: resource 11 [mem 0xfee00000-0xffffffff window]
[    0.270558] pci_bus 0000:03: resource 0 [io  0xf000-0xffff]
[    0.270559] pci_bus 0000:03: resource 1 [mem 0xfca00000-0xfccfffff]
[    0.270559] pci_bus 0000:20: resource 0 [io  0xf000-0xffff]
[    0.270560] pci_bus 0000:20: resource 1 [mem 0xfca00000-0xfcbfffff]
[    0.270561] pci_bus 0000:22: resource 0 [io  0xf000-0xffff]
[    0.270561] pci_bus 0000:22: resource 1 [mem 0xfcb00000-0xfcbfffff]
[    0.270562] pci_bus 0000:25: resource 1 [mem 0xfca00000-0xfcafffff]
[    0.270562] pci_bus 0000:26: resource 0 [io  0xe000-0xefff]
[    0.270563] pci_bus 0000:26: resource 1 [mem 0xfcd00000-0xfcefffff]
[    0.270564] pci_bus 0000:26: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.270564] pci_bus 0000:27: resource 0 [io  0xe000-0xefff]
[    0.270565] pci_bus 0000:27: resource 1 [mem 0xfcd00000-0xfcdfffff]
[    0.270565] pci_bus 0000:27: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.270566] pci_bus 0000:28: resource 0 [io  0xe000-0xefff]
[    0.270566] pci_bus 0000:28: resource 1 [mem 0xfcd00000-0xfcdfffff]
[    0.270567] pci_bus 0000:28: resource 2 [mem 0xe0000000-0xf01fffff 64bit pref]
[    0.270567] pci_bus 0000:29: resource 1 [mem 0xfc700000-0xfc9fffff]
[    0.270568] pci_bus 0000:2a: resource 1 [mem 0xfcf00000-0xfcffffff]
[    0.270730] pci 0000:28:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.270745] pci 0000:28:00.1: D0 power state depends on 0000:28:00.0
[    0.270877] PCI: CLS 64 bytes, default 64
[    0.270905] Trying to unpack rootfs image as initramfs...
[    0.639631] Freeing initrd memory: 42088K
[    0.639656] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    0.639705] pci 0000:00:01.0: Adding to iommu group 0
[    0.639714] pci 0000:00:01.3: Adding to iommu group 1
[    0.639723] pci 0000:00:02.0: Adding to iommu group 2
[    0.639736] pci 0000:00:03.0: Adding to iommu group 3
[    0.639743] pci 0000:00:03.1: Adding to iommu group 4
[    0.639752] pci 0000:00:04.0: Adding to iommu group 5
[    0.639762] pci 0000:00:07.0: Adding to iommu group 6
[    0.639771] pci 0000:00:07.1: Adding to iommu group 7
[    0.639781] pci 0000:00:08.0: Adding to iommu group 8
[    0.639788] pci 0000:00:08.1: Adding to iommu group 9
[    0.639801] pci 0000:00:14.0: Adding to iommu group 10
[    0.639807] pci 0000:00:14.3: Adding to iommu group 10
[    0.639842] pci 0000:00:18.0: Adding to iommu group 11
[    0.639849] pci 0000:00:18.1: Adding to iommu group 11
[    0.639855] pci 0000:00:18.2: Adding to iommu group 11
[    0.639861] pci 0000:00:18.3: Adding to iommu group 11
[    0.639868] pci 0000:00:18.4: Adding to iommu group 11
[    0.639875] pci 0000:00:18.5: Adding to iommu group 11
[    0.639881] pci 0000:00:18.6: Adding to iommu group 11
[    0.639888] pci 0000:00:18.7: Adding to iommu group 11
[    0.639905] pci 0000:03:00.0: Adding to iommu group 12
[    0.639913] pci 0000:03:00.1: Adding to iommu group 12
[    0.639921] pci 0000:03:00.2: Adding to iommu group 12
[    0.639924] pci 0000:20:00.0: Adding to iommu group 12
[    0.639926] pci 0000:20:01.0: Adding to iommu group 12
[    0.639929] pci 0000:20:02.0: Adding to iommu group 12
[    0.639933] pci 0000:20:03.0: Adding to iommu group 12
[    0.639936] pci 0000:20:04.0: Adding to iommu group 12
[    0.639939] pci 0000:22:00.0: Adding to iommu group 12
[    0.639942] pci 0000:25:00.0: Adding to iommu group 12
[    0.639950] pci 0000:26:00.0: Adding to iommu group 13
[    0.639957] pci 0000:27:00.0: Adding to iommu group 14
[    0.639980] pci 0000:28:00.0: Adding to iommu group 15
[    0.639990] pci 0000:28:00.1: Adding to iommu group 16
[    0.639998] pci 0000:29:00.0: Adding to iommu group 17
[    0.640006] pci 0000:29:00.2: Adding to iommu group 18
[    0.640015] pci 0000:29:00.3: Adding to iommu group 19
[    0.640023] pci 0000:2a:00.0: Adding to iommu group 20
[    0.640031] pci 0000:2a:00.2: Adding to iommu group 21
[    0.640039] pci 0000:2a:00.3: Adding to iommu group 22
[    0.643528] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    0.643529] pci 0000:00:00.2: AMD-Vi: Extended features (0xf77ef22294ada):
[    0.643530]  PPR NX GT IA GA PC GA_vAPIC
[    0.643532] AMD-Vi: Interrupt remapping enabled
[    0.643532] AMD-Vi: Virtual APIC enabled
[    0.643618] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.644593] amd_uncore: AMD NB counters detected
[    0.644598] amd_uncore: AMD LLC counters detected
[    0.644785] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.645873] Initialise system trusted keyrings
[    0.645883] Key type blacklist registered
[    0.645911] workingset: timestamp_bits=36 max_order=23 bucket_order=0
[    0.646656] zbud: loaded
[    0.646973] integrity: Platform Keyring initialized
[    0.654347] NET: Registered protocol family 38
[    0.654348] Key type asymmetric registered
[    0.654349] Asymmetric key parser 'x509' registered
[    0.654353] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    0.654396] io scheduler mq-deadline registered
[    0.654397] io scheduler kyber registered
[    0.654411] io scheduler bfq registered
[    0.654524] atomic64_test: passed for x86-64 platform with CX8 and with SSE
[    0.654865] pcieport 0000:00:01.3: AER: enabled with IRQ 26
[    0.655736] pcieport 0000:00:03.1: AER: enabled with IRQ 27
[    0.656626] pcieport 0000:00:07.1: AER: enabled with IRQ 28
[    0.656857] pcieport 0000:00:08.1: AER: enabled with IRQ 30
[    0.658413] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    0.658425] efifb: probing for efifb
[    0.658437] efifb: No BGRT, not showing boot graphics
[    0.658438] efifb: framebuffer at 0xe0000000, using 3072k, total 3072k
[    0.658438] efifb: mode is 1024x768x32, linelength=4096, pages=1
[    0.658438] efifb: scrolling: redraw
[    0.658439] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.658464] fbcon: Deferring console take-over
[    0.658465] fb0: EFI VGA frame buffer device
[    0.658545] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.658560] ACPI: Power Button [PWRB]
[    0.658579] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.658601] ACPI: Power Button [PWRF]
[    0.658634] Monitor-Mwait will be used to enter C-1 state
[    0.658640] ACPI: \_PR_.C000: Found 2 idle states
[    0.658737] ACPI: \_PR_.C002: Found 2 idle states
[    0.658827] ACPI: \_PR_.C004: Found 2 idle states
[    0.658886] ACPI: \_PR_.C006: Found 2 idle states
[    0.658956] ACPI: \_PR_.C008: Found 2 idle states
[    0.659026] ACPI: \_PR_.C00A: Found 2 idle states
[    0.659073] ACPI: \_PR_.C00C: Found 2 idle states
[    0.659125] ACPI: \_PR_.C00E: Found 2 idle states
[    0.659203] ACPI: \_PR_.C001: Found 2 idle states
[    0.659276] ACPI: \_PR_.C003: Found 2 idle states
[    0.659343] ACPI: \_PR_.C005: Found 2 idle states
[    0.659409] ACPI: \_PR_.C007: Found 2 idle states
[    0.659494] ACPI: \_PR_.C009: Found 2 idle states
[    0.659549] ACPI: \_PR_.C00B: Found 2 idle states
[    0.659598] ACPI: \_PR_.C00D: Found 2 idle states
[    0.659661] ACPI: \_PR_.C00F: Found 2 idle states
[    0.659835] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.660693] Non-volatile memory driver v1.3
[    0.660706] Linux agpgart interface v0.103
[    0.661497] ahci 0000:03:00.1: version 3.0
[    0.661572] ahci 0000:03:00.1: SSS flag set, parallel bus scan disabled
[    0.661622] ahci 0000:03:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[    0.661623] ahci 0000:03:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst 
[    0.662023] scsi host0: ahci
[    0.662106] scsi host1: ahci
[    0.662171] scsi host2: ahci
[    0.662226] scsi host3: ahci
[    0.662280] scsi host4: ahci
[    0.662333] scsi host5: ahci
[    0.662390] scsi host6: ahci
[    0.662445] scsi host7: ahci
[    0.662467] ata1: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80100 irq 43
[    0.662468] ata2: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80180 irq 43
[    0.662469] ata3: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80200 irq 43
[    0.662470] ata4: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80280 irq 43
[    0.662471] ata5: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80300 irq 43
[    0.662473] ata6: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80380 irq 43
[    0.662474] ata7: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80400 irq 43
[    0.662475] ata8: SATA max UDMA/133 abar m131072@0xfcc80000 port 0xfcc80480 irq 43
[    0.662566] ahci 0000:2a:00.2: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.662567] ahci 0000:2a:00.2: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part 
[    0.662660] scsi host8: ahci
[    0.662683] ata9: SATA max UDMA/133 abar m4096@0xfcf08000 port 0xfcf08100 irq 45
[    0.662757] libphy: Fixed MDIO Bus: probed
[    0.662803] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.662805] ehci-pci: EHCI PCI platform driver
[    0.662811] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.662821] ohci-pci: OHCI PCI platform driver
[    0.662827] uhci_hcd: USB Universal Host Controller Interface driver
[    0.662874] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.662893] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1
[    0.718188] xhci_hcd 0000:03:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000410
[    0.718464] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[    0.718465] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.718466] usb usb1: Product: xHCI Host Controller
[    0.718467] usb usb1: Manufacturer: Linux 5.9.0-36.fc34.x86_64 xhci-hcd
[    0.718467] usb usb1: SerialNumber: 0000:03:00.0
[    0.718523] hub 1-0:1.0: USB hub found
[    0.718537] hub 1-0:1.0: 14 ports detected
[    0.718774] xhci_hcd 0000:03:00.0: xHCI Host Controller
[    0.718790] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[    0.718792] xhci_hcd 0000:03:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.718844] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.718855] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[    0.718855] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.718856] usb usb2: Product: xHCI Host Controller
[    0.718857] usb usb2: Manufacturer: Linux 5.9.0-36.fc34.x86_64 xhci-hcd
[    0.718857] usb usb2: SerialNumber: 0000:03:00.0
[    0.718902] hub 2-0:1.0: USB hub found
[    0.718911] hub 2-0:1.0: 8 ports detected
[    0.719083] xhci_hcd 0000:29:00.3: xHCI Host Controller
[    0.719103] xhci_hcd 0000:29:00.3: new USB bus registered, assigned bus number 3
[    0.719191] xhci_hcd 0000:29:00.3: hcc params 0x0270f665 hci version 0x100 quirks 0x0000000000000410
[    0.719414] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.09
[    0.719415] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.719416] usb usb3: Product: xHCI Host Controller
[    0.719416] usb usb3: Manufacturer: Linux 5.9.0-36.fc34.x86_64 xhci-hcd
[    0.719417] usb usb3: SerialNumber: 0000:29:00.3
[    0.719460] hub 3-0:1.0: USB hub found
[    0.719464] hub 3-0:1.0: 4 ports detected
[    0.719554] xhci_hcd 0000:29:00.3: xHCI Host Controller
[    0.719569] xhci_hcd 0000:29:00.3: new USB bus registered, assigned bus number 4
[    0.719572] xhci_hcd 0000:29:00.3: Host supports USB 3.0 SuperSpeed
[    0.719581] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.719591] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.09
[    0.719592] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.719593] usb usb4: Product: xHCI Host Controller
[    0.719593] usb usb4: Manufacturer: Linux 5.9.0-36.fc34.x86_64 xhci-hcd
[    0.719594] usb usb4: SerialNumber: 0000:29:00.3
[    0.719636] hub 4-0:1.0: USB hub found
[    0.719641] hub 4-0:1.0: 4 ports detected
[    0.719737] usbcore: registered new interface driver usbserial_generic
[    0.719739] usbserial: USB Serial support registered for generic
[    0.719749] i8042: PNP: No PS/2 controller found.
[    0.719767] mousedev: PS/2 mouse device common for all mice
[    0.719830] rtc_cmos 00:01: RTC can wake from S4
[    0.720104] rtc_cmos 00:01: registered as rtc0
[    0.720181] rtc_cmos 00:01: setting system clock to 2020-10-16T04:32:07 UTC (1602822727)
[    0.720182] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.720204] device-mapper: uevent: version 1.0.3
[    0.720230] device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
[    0.720418] hid: raw HID events driver (C) Jiri Kosina
[    0.720435] usbcore: registered new interface driver usbhid
[    0.720435] usbhid: USB HID core driver
[    0.720495] drop_monitor: Initializing network drop monitor service
[    0.720538] Initializing XFRM netlink socket
[    0.720605] NET: Registered protocol family 10
[    0.722488] Segment Routing with IPv6
[    0.722489] RPL Segment Routing with IPv6
[    0.722500] mip6: Mobile IPv6
[    0.722500] NET: Registered protocol family 17
[    0.723130] microcode: CPU0: patch_level=0x0800820d
[    0.723135] microcode: CPU1: patch_level=0x0800820d
[    0.723141] microcode: CPU2: patch_level=0x0800820d
[    0.723146] microcode: CPU3: patch_level=0x0800820d
[    0.723152] microcode: CPU4: patch_level=0x0800820d
[    0.723157] microcode: CPU5: patch_level=0x0800820d
[    0.723161] microcode: CPU6: patch_level=0x0800820d
[    0.723166] microcode: CPU7: patch_level=0x0800820d
[    0.723171] microcode: CPU8: patch_level=0x0800820d
[    0.723175] microcode: CPU9: patch_level=0x0800820d
[    0.723181] microcode: CPU10: patch_level=0x0800820d
[    0.723186] microcode: CPU11: patch_level=0x0800820d
[    0.723190] microcode: CPU12: patch_level=0x0800820d
[    0.723194] microcode: CPU13: patch_level=0x0800820d
[    0.723196] microcode: CPU14: patch_level=0x0800820d
[    0.723199] microcode: CPU15: patch_level=0x0800820d
[    0.723201] microcode: Microcode Update Driver: v2.2.
[    0.723203] IPI shorthand broadcast: enabled
[    0.723207] AVX2 version of gcm_enc/dec engaged.
[    0.723207] AES CTR mode by8 optimization enabled
[    0.732173] sched_clock: Marking stable (744164418, -11996620)->(1011588074, -279420276)
[    0.732282] registered taskstats version 1
[    0.732290] Loading compiled-in X.509 certificates
[    0.732724] Loaded X.509 cert 'Fedora kernel signing key: c1cf65b0a83c8aa3fb2d2315bfbd3283c8d43266'
[    0.732742] zswap: loaded using pool lzo/zbud
[    0.732931] Key type ._fscrypt registered
[    0.732932] Key type .fscrypt registered
[    0.732932] Key type fscrypt-provisioning registered
[    0.733048] Btrfs loaded, crc32c=crc32c-generic
[    0.734429] Key type encrypted registered
[    0.734645] ima: No TPM chip found, activating TPM-bypass!
[    0.734650] ima: Allocated hash algorithm: sha256
[    0.734657] ima: No architecture policies found
[    0.734917] PM:   Magic number: 8:127:515
[    0.735023] RAS: Correctable Errors collector initialized.
[    0.970053] ata1: SATA link down (SStatus 0 SControl 300)
[    0.970076] ata9: SATA link down (SStatus 0 SControl 300)
[    1.045882] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[    1.072251] usb 4-1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.17
[    1.072252] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.072252] usb 4-1: Product: 4-Port USB 3.0 Hub
[    1.072253] usb 4-1: Manufacturer: Generic
[    1.099009] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[    1.107256] hub 4-1:1.0: USB hub found
[    1.108635] hub 4-1:1.0: 4 ports detected
[    1.178482] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[    1.283704] ata2: SATA link down (SStatus 0 SControl 300)
[    1.303596] usb 1-2: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
[    1.303597] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.303599] usb 1-2: Product: USB 2.0 Hub [MTT]
[    1.309557] hub 1-2:1.0: USB hub found
[    1.312542] hub 1-2:1.0: 4 ports detected
[    1.321772] usb 3-1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.17
[    1.321773] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.321774] usb 3-1: Product: 4-Port USB 2.0 Hub
[    1.321774] usb 3-1: Manufacturer: Generic
[    1.360703] hub 3-1:1.0: USB hub found
[    1.362347] hub 3-1:1.0: 4 ports detected
[    1.508039] usb 1-11: new full-speed USB device number 3 using xhci_hcd
[    1.593145] ata3: SATA link down (SStatus 0 SControl 300)
[    1.683507] tsc: Refined TSC clocksource calibration: 3699.996 MHz
[    1.683516] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6aaaa371c79, max_idle_ns: 881590671907 ns
[    1.683560] clocksource: Switched to clocksource tsc
[    1.878486] usb 1-11: New USB device found, idVendor=1b1c, idProduct=0c04, bcdDevice= 2.00
[    1.878488] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.878490] usb 1-11: Product: Integrated USB Bridge
[    1.878491] usb 1-11: Manufacturer: Corsair Memory, Inc.
[    1.890557] hid-generic 0003:1B1C:0C04.0001: hiddev96,hidraw0: USB HID v1.11 Device [Corsair Memory, Inc. Integrated USB Bridge] on usb-0000:03:00.0-11/input0
[    1.906096] ata4: SATA link down (SStatus 0 SControl 300)
[    1.955398] usb 1-2.1: new high-speed USB device number 4 using xhci_hcd
[    2.151733] usb 1-2.1: New USB device found, idVendor=13fd, idProduct=160f, bcdDevice= 1.00
[    2.151735] usb 1-2.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.216201] ata5: SATA link down (SStatus 0 SControl 300)
[    2.321393] usb 1-12: new full-speed USB device number 5 using xhci_hcd
[    2.683384] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.683693] ata6.00: supports DRM functions and may not be fully accessible
[    2.684496] ata6.00: ATA-11: Samsung SSD 860 EVO 1TB, RVT01B6Q, max UDMA/133
[    2.684497] ata6.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    2.686754] ata6.00: supports DRM functions and may not be fully accessible
[    2.689416] ata6.00: configured for UDMA/133
[    2.689821] scsi 5:0:0:0: Direct-Access     ATA      Samsung SSD 860  1B6Q PQ: 0 ANSI: 5
[    2.689913] ata6.00: Enabling discard_zeroes_data
[    2.689935] sd 5:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.689939] sd 5:0:0:0: [sda] Write Protect is off
[    2.689940] sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.689946] sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.689955] sd 5:0:0:0: Attached scsi generic sg0 type 0
[    2.690141] ata6.00: Enabling discard_zeroes_data
[    2.691389]  sda: sda1 sda2
[    2.691704] ata6.00: Enabling discard_zeroes_data
[    2.692764] sd 5:0:0:0: [sda] supports TCG Opal
[    2.692765] sd 5:0:0:0: [sda] Attached SCSI disk
[    2.695299] usb 1-12: New USB device found, idVendor=1532, idProduct=0228, bcdDevice= 2.00
[    2.695300] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.695302] usb 1-12: Product: Razer BlackWidow Elite
[    2.695303] usb 1-12: Manufacturer: Razer
[    2.719499] input: Razer Razer BlackWidow Elite as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.0/0003:1532:0228.0002/input/input2
[    2.771401] usb 1-2.2: new high-speed USB device number 6 using xhci_hcd
[    2.771548] hid-generic 0003:1532:0228.0002: input,hidraw1: USB HID v1.11 Keyboard [Razer Razer BlackWidow Elite] on usb-0000:03:00.0-12/input0
[    2.780714] input: Razer Razer BlackWidow Elite Keyboard as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.1/0003:1532:0228.0003/input/input3
[    2.832508] input: Razer Razer BlackWidow Elite Consumer Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.1/0003:1532:0228.0003/input/input4
[    2.832546] input: Razer Razer BlackWidow Elite System Control as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.1/0003:1532:0228.0003/input/input5
[    2.832582] input: Razer Razer BlackWidow Elite as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.1/0003:1532:0228.0003/input/input6
[    2.832621] hid-generic 0003:1532:0228.0003: input,hidraw2: USB HID v1.11 Keyboard [Razer Razer BlackWidow Elite] on usb-0000:03:00.0-12/input1
[    2.840557] input: Razer Razer BlackWidow Elite as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-12/1-12:1.2/0003:1532:0228.0004/input/input7
[    2.840791] hid-generic 0003:1532:0228.0004: input,hidraw3: USB HID v1.11 Mouse [Razer Razer BlackWidow Elite] on usb-0000:03:00.0-12/input2
[    2.980823] usb 1-2.2: New USB device found, idVendor=058f, idProduct=6364, bcdDevice= 1.00
[    2.980825] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.980826] usb 1-2.2: Product: Mass Storage Device
[    2.980827] usb 1-2.2: Manufacturer: Generic
[    2.980828] usb 1-2.2: SerialNumber: 058F63646476
[    3.000299] ata7: SATA link down (SStatus 0 SControl 300)
[    3.008141] hid-generic 0003:058F:6364.0005: hiddev97,hidraw4: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:03:00.0-2.2/input1
[    3.138399] usb 1-13: new full-speed USB device number 7 using xhci_hcd
[    3.309286] ata8: SATA link down (SStatus 0 SControl 300)
[    3.310486] Freeing unused decrypted memory: 2040K
[    3.310788] Freeing unused kernel image (initmem) memory: 2512K
[    3.310790] Write protecting the kernel read-only data: 26624k
[    3.311246] Freeing unused kernel image (text/rodata gap) memory: 2044K
[    3.311496] Freeing unused kernel image (rodata/data gap) memory: 1500K
[    3.338340] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    3.338343] rodata_test: all tests were successful
[    3.338347] Run /init as init process
[    3.338348]   with arguments:
[    3.338348]     /init
[    3.338349]     rhgb
[    3.338349]   with environment:
[    3.338349]     HOME=/
[    3.338349]     TERM=linux
[    3.338350]     BOOT_IMAGE=(hd2,gpt2)/vmlinuz-5.9.0-36.fc34.x86_64
[    3.348021] systemd[1]: systemd v246.6-3.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[    3.360045] systemd[1]: Detected architecture x86-64.
[    3.360046] systemd[1]: Running in initial RAM disk.
[    3.360063] systemd[1]: Set hostname to <wopr>.
[    3.392483] systemd[1]: /usr/lib/systemd/system/memstrack.service:12: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[    3.392488] systemd[1]: /usr/lib/systemd/system/memstrack.service:13: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[    3.396313] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[    3.398350] systemd[1]: /usr/lib/systemd/system/dracut-pre-udev.service:27: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[    3.398353] systemd[1]: /usr/lib/systemd/system/dracut-pre-udev.service:28: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[    3.398526] systemd[1]: /usr/lib/systemd/system/dracut-pre-trigger.service:23: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[    3.398529] systemd[1]: /usr/lib/systemd/system/dracut-pre-trigger.service:24: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[    3.398724] systemd[1]: /usr/lib/systemd/system/dracut-pre-pivot.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[    3.398727] systemd[1]: /usr/lib/systemd/system/dracut-pre-pivot.service:31: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[    3.399497] systemd[1]: /usr/lib/systemd/system/dracut-pre-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[    3.399500] systemd[1]: /usr/lib/systemd/system/dracut-pre-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[    3.399671] systemd[1]: /usr/lib/systemd/system/dracut-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[    3.399674] systemd[1]: /usr/lib/systemd/system/dracut-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[    3.399798] systemd[1]: /usr/lib/systemd/system/dracut-initqueue.service:24: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[    3.399801] systemd[1]: /usr/lib/systemd/system/dracut-initqueue.service:25: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[    3.399934] systemd[1]: /usr/lib/systemd/system/dracut-cmdline.service:26: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[    3.399937] systemd[1]: /usr/lib/systemd/system/dracut-cmdline.service:27: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[    3.401709] systemd[1]: Queued start job for default target Initrd Default Target.
[    3.401779] systemd[1]: Reached target Local File Systems.
[    3.401810] systemd[1]: Reached target Slices.
[    3.401820] systemd[1]: Reached target Swap.
[    3.401828] systemd[1]: Reached target Timers.
[    3.401899] systemd[1]: Listening on Journal Audit Socket.
[    3.401944] systemd[1]: Listening on Journal Socket (/dev/log).
[    3.401994] systemd[1]: Listening on Journal Socket.
[    3.402049] systemd[1]: Listening on udev Control Socket.
[    3.402087] systemd[1]: Listening on udev Kernel Socket.
[    3.402096] systemd[1]: Reached target Sockets.
[    3.402975] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    3.403368] systemd[1]: Started Memstrack Anylazing Service.
[    3.403847] systemd[1]: Started Hardware RNG Entropy Gatherer Daemon.
[    3.405029] systemd[1]: Starting Journal Service...
[    3.405488] systemd[1]: Starting Load Kernel Modules...
[    3.406010] systemd[1]: Starting Setup Virtual Console...
[    3.406306] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    3.406817] systemd[1]: Starting Create Static Device Nodes in /dev...
[    3.411014] systemd[1]: Finished Create Static Device Nodes in /dev.
[    3.412280] systemd[1]: memstrack.service: Succeeded.
[    3.450864] fuse: init (API version 7.31)
[    3.451568] systemd[1]: Finished Load Kernel Modules.
[    3.451599] audit: type=1130 audit(1602822730.230:2): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.452251] systemd[1]: Starting Apply Kernel Variables...
[    3.456946] systemd[1]: Finished Apply Kernel Variables.
[    3.456973] audit: type=1130 audit(1602822730.235:3): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.461206] systemd[1]: Started Journal Service.
[    3.461246] audit: type=1130 audit(1602822730.240:4): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.463522] audit: type=1130 audit(1602822730.242:5): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.467437] audit: type=1130 audit(1602822730.246:6): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.476185] audit: type=1130 audit(1602822730.255:7): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline-ask comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.498542] audit: type=1130 audit(1602822730.277:8): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-cmdline comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.511635] usb 1-13: New USB device found, idVendor=1050, idProduct=0407, bcdDevice= 5.12
[    3.511636] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.511638] usb 1-13: Product: YubiKey OTP+FIDO+CCID
[    3.511639] usb 1-13: Manufacturer: Yubico
[    3.511654] audit: type=1130 audit(1602822730.290:9): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-pre-udev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    3.512307] audit: type=1334 audit(1602822730.291:10): prog-id=6 op=LOAD
[    3.549549] input: Yubico YubiKey OTP+FIDO+CCID as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.0/0003:1050:0407.0006/input/input8
[    3.598404] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:02)
[    3.601160] hid-generic 0003:1050:0407.0006: input,hidraw5: USB HID v1.10 Keyboard [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:03:00.0-13/input0
[    3.604526] hid-generic 0003:1050:0407.0007: hiddev98,hidraw6: USB HID v1.10 Device [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:03:00.0-13/input1
[    3.626028] usb-storage 1-2.2:1.0: USB Mass Storage device detected
[    3.626155] scsi host9: usb-storage 1-2.2:1.0
[    3.626227] usbcore: registered new interface driver usb-storage
[    3.626331] ccp 0000:29:00.2: enabling device (0000 -> 0002)
[    3.626606] ccp 0000:29:00.2: ccp enabled
[    3.628239] usbcore: registered new interface driver uas
[    3.628553] dca service started, version 1.12.1
[    3.631124] nvme nvme0: pci function 0000:25:00.0
[    3.643718] igb: Intel(R) Gigabit Ethernet Network Driver
[    3.643718] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.643810] nvme nvme0: 7/0/0 default/read/poll queues
[    3.651083]  nvme0n1: p1 p2 p3
[    3.671545] pps pps0: new PPS source ptp0
[    3.671573] igb 0000:22:00.0: added PHC on eth0
[    3.671574] igb 0000:22:00.0: Intel(R) Gigabit Ethernet Network Connection
[    3.671575] igb 0000:22:00.0: eth0: (PCIe:2.5Gb/s:Width x1) 30:9c:23:af:57:9e
[    3.671576] igb 0000:22:00.0: eth0: PBA No: FFFFFF-0FF
[    3.671577] igb 0000:22:00.0: Using MSI-X interrupts. 2 rx queue(s), 2 tx queue(s)
[    3.674656] igb 0000:22:00.0 enp34s0: renamed from eth0
[    3.682938] BTRFS: device label fedora devid 1 transid 49676 /dev/nvme0n1p3 scanned by systemd-udevd (480)
[    3.704298] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    3.925394] [drm] amdgpu kernel modesetting enabled.
[    3.925442] amdgpu: Ignoring ACPI CRAT on non-APU system
[    3.925445] Virtual CRAT table created for CPU
[    3.925452] amdgpu: Topology: Add CPU node
[    3.925525] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[    3.925525] fb0: switching to amdgpudrmfb from EFI VGA
[    3.925564] amdgpu 0000:28:00.0: vgaarb: deactivate vga console
[    3.925644] [drm] initializing kernel modesetting (NAVI10 0x1002:0x731F 0x1DA2:0xE409 0xC1).
[    3.925645] amdgpu 0000:28:00.0: amdgpu: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
[    3.925651] [drm] register mmio base: 0xFCD00000
[    3.925652] [drm] register mmio size: 524288
[    3.926738] [drm] add ip block number 0 <nv_common>
[    3.926739] [drm] add ip block number 1 <gmc_v10_0>
[    3.926739] [drm] add ip block number 2 <navi10_ih>
[    3.926739] [drm] add ip block number 3 <psp>
[    3.926740] [drm] add ip block number 4 <smu>
[    3.926740] [drm] add ip block number 5 <dm>
[    3.926741] [drm] add ip block number 6 <gfx_v10_0>
[    3.926741] [drm] add ip block number 7 <sdma_v5_0>
[    3.926742] [drm] add ip block number 8 <vcn_v2_0>
[    3.926742] [drm] add ip block number 9 <jpeg_v2_0>
[    3.926753] amdgpu 0000:28:00.0: No more image in the PCI ROM
[    3.926772] amdgpu: ATOM BIOS: 113-D1990101-X02
[    3.926780] [drm] VCN decode is enabled in VM mode
[    3.926780] [drm] VCN encode is enabled in VM mode
[    3.926780] [drm] JPEG decode is enabled in VM mode
[    3.926797] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[    3.926803] amdgpu 0000:28:00.0: amdgpu: VRAM: 8176M 0x0000008000000000 - 0x00000081FEFFFFFF (8176M used)
[    3.926804] amdgpu 0000:28:00.0: amdgpu: GART: 512M 0x0000000000000000 - 0x000000001FFFFFFF
[    3.926810] [drm] Detected VRAM RAM=8176M, BAR=256M
[    3.926811] [drm] RAM width 256bits GDDR6
[    3.926848] [TTM] Zone  kernel: Available graphics memory: 16444964 KiB
[    3.926849] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    3.926849] [TTM] Initializing pool allocator
[    3.926852] [TTM] Initializing DMA pool allocator
[    3.926882] [drm] amdgpu: 8176M of VRAM memory ready
[    3.926885] [drm] amdgpu: 8176M of GTT memory ready.
[    3.926886] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    3.926991] [drm] PCIE GART of 512M enabled (table at 0x0000008000300000).
[    3.928658] [drm] Found VCN firmware Version ENC: 1.9 DEC: 5 VEP: 0 Revision: 0
[    3.928662] [drm] PSP loading VCN firmware
[    4.467037] [drm] reserve 0x900000 from 0x81fe400000 for PSP TMR
[    4.537030] amdgpu 0000:28:00.0: amdgpu: RAS: optional ras ta ucode is not available
[    4.543105] amdgpu 0000:28:00.0: amdgpu: use vbios provided pptable
[    4.543107] amdgpu 0000:28:00.0: amdgpu: smc_dpm_info table revision(format.content): 4.5
[    4.587821] amdgpu 0000:28:00.0: amdgpu: SMU is initialized successfully!
[    4.588023] [drm] Display Core initialized with v3.2.95!
[    4.629416] scsi 9:0:0:0: Direct-Access     Generic- SD/MMC           1.00 PQ: 0 ANSI: 0
[    4.629813] scsi 9:0:0:1: Direct-Access     Generic- Compact Flash    1.01 PQ: 0 ANSI: 0
[    4.630161] scsi 9:0:0:2: Direct-Access     Generic- SM/xD-Picture    1.02 PQ: 0 ANSI: 0
[    4.630586] scsi 9:0:0:3: Direct-Access     Generic- MS/MS-Pro        1.03 PQ: 0 ANSI: 0 CCS
[    4.630715] sd 9:0:0:0: Attached scsi generic sg1 type 0
[    4.630784] sd 9:0:0:1: Attached scsi generic sg2 type 0
[    4.630843] sd 9:0:0:2: Attached scsi generic sg3 type 0
[    4.630906] sd 9:0:0:3: Attached scsi generic sg4 type 0
[    4.692619] [drm] kiq ring mec 2 pipe 1 q 0
[    4.697026] [drm] VCN decode and encode initialized successfully(under DPG Mode).
[    4.697405] [drm] JPEG decode initialized successfully.
[    4.698059] kfd kfd: Allocated 3969056 bytes on gart
[    4.698428] Virtual CRAT table created for GPU
[    4.698504] amdgpu: Topology: Add dGPU node [0x731f:0x1002]
[    4.698505] kfd kfd: added device 1002:731f
[    4.698507] amdgpu 0000:28:00.0: amdgpu: SE 2, SH per SE 2, CU per SH 10, active_cu_number 40
[    4.699753] [drm] fb mappable at 0xE04CA000
[    4.699754] [drm] vram apper at 0xE0000000
[    4.699754] [drm] size 8294400
[    4.699754] [drm] fb depth is 24
[    4.699755] [drm]    pitch is 7680
[    4.699786] fbcon: amdgpudrmfb (fb0) is primary device
[    4.699787] fbcon: Deferring console take-over
[    4.699788] amdgpu 0000:28:00.0: [drm] fb0: amdgpudrmfb frame buffer device
[    4.719070] amdgpu 0000:28:00.0: amdgpu: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
[    4.719072] amdgpu 0000:28:00.0: amdgpu: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[    4.719073] amdgpu 0000:28:00.0: amdgpu: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[    4.719073] amdgpu 0000:28:00.0: amdgpu: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[    4.719074] amdgpu 0000:28:00.0: amdgpu: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[    4.719075] amdgpu 0000:28:00.0: amdgpu: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[    4.719076] amdgpu 0000:28:00.0: amdgpu: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[    4.719076] amdgpu 0000:28:00.0: amdgpu: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[    4.719077] amdgpu 0000:28:00.0: amdgpu: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[    4.719077] amdgpu 0000:28:00.0: amdgpu: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[    4.719078] amdgpu 0000:28:00.0: amdgpu: ring sdma0 uses VM inv eng 12 on hub 0
[    4.719079] amdgpu 0000:28:00.0: amdgpu: ring sdma1 uses VM inv eng 13 on hub 0
[    4.719080] amdgpu 0000:28:00.0: amdgpu: ring vcn_dec uses VM inv eng 0 on hub 1
[    4.719080] amdgpu 0000:28:00.0: amdgpu: ring vcn_enc0 uses VM inv eng 1 on hub 1
[    4.719081] amdgpu 0000:28:00.0: amdgpu: ring vcn_enc1 uses VM inv eng 4 on hub 1
[    4.719082] amdgpu 0000:28:00.0: amdgpu: ring jpeg_dec uses VM inv eng 5 on hub 1
[    4.719621] [drm] Initialized amdgpu 3.39.0 20150101 for 0000:28:00.0 on minor 0
[    5.310188] sd 9:0:0:0: [sdb] 7744512 512-byte logical blocks: (3.97 GB/3.69 GiB)
[    5.313164] sd 9:0:0:0: [sdb] Write Protect is off
[    5.313165] sd 9:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    5.315163] sd 9:0:0:0: [sdb] No Caching mode page found
[    5.315164] sd 9:0:0:0: [sdb] Assuming drive cache: write through
[    5.321463] sd 9:0:0:1: [sdc] Attached SCSI removable disk
[    5.322347] sd 9:0:0:3: [sde] Attached SCSI removable disk
[    5.324122] sd 9:0:0:2: [sdd] Attached SCSI removable disk
[    5.332832]  sdb: sdb1
[    5.338163] sd 9:0:0:0: [sdb] Attached SCSI removable disk
[    6.611028] xhci_hcd 0000:29:00.3: Timeout while waiting for setup device command
[   12.243386] xhci_hcd 0000:29:00.3: Timeout while waiting for setup device command
[   12.451030] usb 4-3: device not accepting address 3, error -62
[   12.527678] usb 4-1.1: new SuperSpeed Gen 1 USB device number 4 using xhci_hcd
[   12.553118] usb 4-1.1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.17
[   12.553119] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   12.553120] usb 4-1.1: Product: 4-Port USB 3.0 Hub
[   12.553121] usb 4-1.1: Manufacturer: Generic
[   12.580304] hub 4-1.1:1.0: USB hub found
[   12.581503] hub 4-1.1:1.0: 4 ports detected
[   12.660019] usb 3-2: new full-speed USB device number 3 using xhci_hcd
[   12.836739] usb 3-2: New USB device found, idVendor=03f0, idProduct=7d04, bcdDevice= 1.00
[   12.836741] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   12.836742] usb 3-2: Product: Deskjet F2100 series
[   12.836743] usb 3-2: Manufacturer: HP
[   12.836743] usb 3-2: SerialNumber: CN7B84P67T0505
[   12.867023] usb 3-1.1: new high-speed USB device number 4 using xhci_hcd
[   12.971781] usb 3-1.1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.17
[   12.971783] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   12.971784] usb 3-1.1: Product: 4-Port USB 2.0 Hub
[   12.971784] usb 3-1.1: Manufacturer: Generic
[   13.008595] hub 3-1.1:1.0: USB hub found
[   13.009554] hub 3-1.1:1.0: 4 ports detected
[   18.387007] xhci_hcd 0000:29:00.3: xHCI host not responding to stop endpoint command.
[   18.387009] xhci_hcd 0000:29:00.3: USBSTS:
[   18.403013] xhci_hcd 0000:29:00.3: Host halt failed, -110
[   18.403013] xhci_hcd 0000:29:00.3: xHCI host controller not responding, assume dead
[   18.403017] xhci_hcd 0000:29:00.3: HC died; cleaning up
[   18.403035] xhci_hcd 0000:29:00.3: Timeout while waiting for setup device command
[   18.819014] usb 4-3: device not accepting address 5, error -108
[   18.819034] usb usb4-port3: attempt power cycle
[   18.819051] usb usb3-port3: couldn't allocate usb_device
[   18.819058] usb 3-1: USB disconnect, device number 2
[   18.819080] usb 3-1-port2: couldn't allocate usb_device
[   18.819086] usb 3-1.1: USB disconnect, device number 4
[   18.819542] usb 3-2: USB disconnect, device number 3
[   19.131014] usb usb4-port3: couldn't allocate usb_device
[   19.131020] usb 4-1: USB disconnect, device number 2
[   19.131022] usb 4-1.1: USB disconnect, device number 4
[   19.137333] kauditd_printk_skb: 5 callbacks suppressed
[   19.137334] audit: type=1130 audit(1602822745.916:16): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=dracut-initqueue comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.152888] audit: type=1130 audit(1602822745.931:17): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=kernel msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   19.159438] BTRFS info (device nvme0n1p3): disk space caching is enabled
[   19.159439] BTRFS info (device nvme0n1p3): has skinny extents
[   19.163069] BTRFS info (device nvme0n1p3): enabling ssd optimizations
[   19.176365] audit: type=1334 audit(1602822745.955:18): prog-id=8 op=UNLOAD
[   19.176369] audit: type=1334 audit(1602822745.955:19): prog-id=7 op=UNLOAD
[   19.176375] audit: type=1334 audit(1602822745.955:20): prog-id=6 op=UNLOAD
[   19.176426] audit: type=1334 audit(1602822745.955:21): prog-id=5 op=UNLOAD
[   19.176432] audit: type=1334 audit(1602822745.955:22): prog-id=4 op=UNLOAD
[   19.176562] audit: type=1334 audit(1602822745.955:23): prog-id=3 op=UNLOAD
[   19.261049] audit: type=1334 audit(1602822746.040:24): prog-id=9 op=LOAD
[   19.261359] audit: type=1334 audit(1602822746.040:25): prog-id=10 op=LOAD
[   19.506325] SELinux:  Permission watch in class filesystem not defined in policy.
[   19.506327] SELinux:  Permission watch in class file not defined in policy.
[   19.506328] SELinux:  Permission watch_mount in class file not defined in policy.
[   19.506328] SELinux:  Permission watch_sb in class file not defined in policy.
[   19.506328] SELinux:  Permission watch_with_perm in class file not defined in policy.
[   19.506329] SELinux:  Permission watch_reads in class file not defined in policy.
[   19.506330] SELinux:  Permission watch in class dir not defined in policy.
[   19.506330] SELinux:  Permission watch_mount in class dir not defined in policy.
[   19.506331] SELinux:  Permission watch_sb in class dir not defined in policy.
[   19.506331] SELinux:  Permission watch_with_perm in class dir not defined in policy.
[   19.506331] SELinux:  Permission watch_reads in class dir not defined in policy.
[   19.506333] SELinux:  Permission watch in class lnk_file not defined in policy.
[   19.506334] SELinux:  Permission watch_mount in class lnk_file not defined in policy.
[   19.506334] SELinux:  Permission watch_sb in class lnk_file not defined in policy.
[   19.506334] SELinux:  Permission watch_with_perm in class lnk_file not defined in policy.
[   19.506335] SELinux:  Permission watch_reads in class lnk_file not defined in policy.
[   19.506336] SELinux:  Permission watch in class chr_file not defined in policy.
[   19.506336] SELinux:  Permission watch_mount in class chr_file not defined in policy.
[   19.506336] SELinux:  Permission watch_sb in class chr_file not defined in policy.
[   19.506337] SELinux:  Permission watch_with_perm in class chr_file not defined in policy.
[   19.506337] SELinux:  Permission watch_reads in class chr_file not defined in policy.
[   19.506338] SELinux:  Permission watch in class blk_file not defined in policy.
[   19.506338] SELinux:  Permission watch_mount in class blk_file not defined in policy.
[   19.506338] SELinux:  Permission watch_sb in class blk_file not defined in policy.
[   19.506339] SELinux:  Permission watch_with_perm in class blk_file not defined in policy.
[   19.506339] SELinux:  Permission watch_reads in class blk_file not defined in policy.
[   19.506340] SELinux:  Permission watch in class sock_file not defined in policy.
[   19.506340] SELinux:  Permission watch_mount in class sock_file not defined in policy.
[   19.506340] SELinux:  Permission watch_sb in class sock_file not defined in policy.
[   19.506341] SELinux:  Permission watch_with_perm in class sock_file not defined in policy.
[   19.506341] SELinux:  Permission watch_reads in class sock_file not defined in policy.
[   19.506342] SELinux:  Permission watch in class fifo_file not defined in policy.
[   19.506342] SELinux:  Permission watch_mount in class fifo_file not defined in policy.
[   19.506342] SELinux:  Permission watch_sb in class fifo_file not defined in policy.
[   19.506343] SELinux:  Permission watch_with_perm in class fifo_file not defined in policy.
[   19.506343] SELinux:  Permission watch_reads in class fifo_file not defined in policy.
[   19.506369] SELinux:  Permission perfmon in class capability2 not defined in policy.
[   19.506369] SELinux:  Permission bpf in class capability2 not defined in policy.
[   19.506370] SELinux:  Permission checkpoint_restore in class capability2 not defined in policy.
[   19.506373] SELinux:  Permission perfmon in class cap2_userns not defined in policy.
[   19.506374] SELinux:  Permission bpf in class cap2_userns not defined in policy.
[   19.506374] SELinux:  Permission checkpoint_restore in class cap2_userns not defined in policy.
[   19.506391] SELinux:  Class perf_event not defined in policy.
[   19.506392] SELinux:  Class lockdown not defined in policy.
[   19.506392] SELinux: the above unknown classes and permissions will be allowed
[   19.506395] SELinux:  policy capability network_peer_controls=1
[   19.506395] SELinux:  policy capability open_perms=1
[   19.506396] SELinux:  policy capability extended_socket_class=1
[   19.506396] SELinux:  policy capability always_check_network=0
[   19.506396] SELinux:  policy capability cgroup_seclabel=1
[   19.506397] SELinux:  policy capability nnp_nosuid_transition=1
[   19.506397] SELinux:  policy capability genfs_seclabel_symlinks=0
[   19.522542] systemd[1]: Successfully loaded SELinux policy in 82.499ms.
[   19.526119] systemd[1]: RTC configured in localtime, applying delta of 660 minutes to system time.
[   19.560716] systemd[1]: Relabelled /dev, /dev/shm, /run, /sys/fs/cgroup in 23.595ms.
[   19.562591] systemd[1]: systemd v246.6-3.fc33 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[   19.574037] systemd[1]: Detected architecture x86-64.
[   19.574321] systemd[1]: Set hostname to <wopr>.
[   19.595542] zram_generator::generator[635]: Creating dev-zram0.swap for /dev/zram0 (4096MB)
[   19.605882] zram: Added device: zram0
[   19.634677] systemd[1]: /usr/lib/systemd/system/plymouth-start.service:15: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[   19.650643] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service:27: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   19.650647] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-udev.service:28: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[   19.650833] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service:23: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   19.650837] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-trigger.service:24: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[   19.651259] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service:30: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   19.651262] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-pivot.service:31: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[   19.651442] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   19.651445] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-pre-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[   19.651671] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service:22: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   19.651675] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-mount.service:23: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[   19.651812] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service:24: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   19.651816] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-initqueue.service:25: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[   19.651955] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service:26: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   19.651958] systemd[1]: /usr/lib/dracut/modules.d/98dracut-systemd/dracut-cmdline.service:27: Standard output type syslog+console is obsolete, automatically updating to journal+console. Please update your unit file, and consider removing the setting altogether.
[   19.653736] systemd[1]: /usr/lib/systemd/system/alsa-restore.service:15: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   19.660236] systemd[1]: /usr/lib/systemd/system/mcelog.service:8: Standard output type syslog is obsolete, automatically updating to journal. Please update your unit file, and consider removing the setting altogether.
[   19.720244] systemd[1]: initrd-switch-root.service: Succeeded.
[   19.720366] systemd[1]: Stopped Switch Root.
[   19.720704] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
[   19.720872] systemd[1]: Created slice system-getty.slice.
[   19.721018] systemd[1]: Created slice system-modprobe.slice.
[   19.721194] systemd[1]: Created slice system-swap\x2dcreate.slice.
[   19.721329] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[   19.721496] systemd[1]: Created slice User and Session Slice.
[   19.721517] systemd[1]: Condition check resulted in Dispatch Password Requests to Console Directory Watch being skipped.
[   19.721583] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   19.721851] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   19.721879] systemd[1]: Reached target Local Encrypted Volumes.
[   19.721895] systemd[1]: Reached target Login Prompts.
[   19.721913] systemd[1]: Stopped target Switch Root.
[   19.721927] systemd[1]: Stopped target Initrd File Systems.
[   19.721938] systemd[1]: Stopped target Initrd Root File System.
[   19.721976] systemd[1]: Reached target Slices.
[   19.722292] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   19.722854] systemd[1]: Listening on LVM2 poll daemon socket.
[   19.723714] systemd[1]: Listening on Process Core Dump Socket.
[   19.723789] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   19.724109] systemd[1]: Listening on udev Control Socket.
[   19.724290] systemd[1]: Listening on udev Kernel Socket.
[   19.724775] systemd[1]: Listening on User Database Manager Socket.
[   19.725551] systemd[1]: Mounting Huge Pages File System...
[   19.726221] systemd[1]: Mounting POSIX Message Queue File System...
[   19.726746] systemd[1]: Mounting Kernel Debug File System...
[   19.726819] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[   19.727341] systemd[1]: Starting Create list of static device nodes for the current kernel...
[   19.727823] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   19.727875] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[   19.728334] systemd[1]: Starting Preprocess NFS configuration convertion...
[   19.728457] systemd[1]: plymouth-switch-root.service: Succeeded.
[   19.728568] systemd[1]: Stopped Plymouth switch root service.
[   19.728698] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[   19.728786] systemd[1]: systemd-fsck-root.service: Succeeded.
[   19.728896] systemd[1]: Stopped File System Check on Root Device.
[   19.728955] systemd[1]: Stopped Journal Service.
[   19.729957] systemd[1]: Starting Journal Service...
[   19.730560] systemd[1]: Starting Load Kernel Modules...
[   19.731070] systemd[1]: Starting Remount Root and Kernel File Systems...
[   19.731120] systemd[1]: Condition check resulted in Repartition Root Disk being skipped.
[   19.731637] systemd[1]: Starting Coldplug All udev Devices...
[   19.732239] systemd[1]: sysroot.mount: Succeeded.
[   19.732711] systemd[1]: Mounted Huge Pages File System.
[   19.732816] systemd[1]: Mounted POSIX Message Queue File System.
[   19.732908] systemd[1]: Mounted Kernel Debug File System.
[   19.733166] systemd[1]: Finished Create list of static device nodes for the current kernel.
[   19.733401] systemd[1]: nfs-convert.service: Succeeded.
[   19.733509] systemd[1]: Finished Preprocess NFS configuration convertion.
[   19.736515] BTRFS info (device nvme0n1p3): disk space caching is enabled
[   19.737238] systemd[1]: Finished Load Kernel Modules.
[   19.737475] systemd[1]: Finished Remount Root and Kernel File Systems.
[   19.738184] systemd[1]: Mounting FUSE Control File System...
[   19.738240] systemd[1]: Condition check resulted in OSTree Remount OS/ Bind Mounts being skipped.
[   19.738273] systemd[1]: Condition check resulted in First Boot Wizard being skipped.
[   19.738786] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[   19.739277] systemd[1]: Starting Load/Save Random Seed...
[   19.739757] systemd[1]: Starting Apply Kernel Variables...
[   19.739807] systemd[1]: Condition check resulted in Create System Users being skipped.
[   19.740257] systemd[1]: Starting Create Static Device Nodes in /dev...
[   19.740815] systemd[1]: Mounted FUSE Control File System.
[   19.747103] systemd[1]: Finished Apply Kernel Variables.
[   19.755400] systemd[1]: Started Journal Service.
[   19.869815] acpi_cpufreq: overriding BIOS provided _PSD data
[   19.975352] input: PC Speaker as /devices/platform/pcspkr/input/input9
[   19.975501] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   19.975503] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[   19.975562] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[   19.987607] RAPL PMU: API unit is 2^-32 Joules, 1 fixed counters, 163840 ms ovfl timer
[   19.987608] RAPL PMU: hw unit of domain package 2^-16 Joules
[   19.990391] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[   19.990454] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[   19.990463] sp5100-tco sp5100-tco: Watchdog hardware is disabled
[   20.044540] zram0: detected capacity change from 0 to 4294967296
[   20.072079] Adding 4194300k swap on /dev/zram0.  Priority:100 extents:1 across:4194300k SSFS
[   20.085620] kvm: Nested Virtualization enabled
[   20.085628] SVM: kvm: Nested Paging enabled
[   20.085629] SVM: Virtual VMLOAD VMSAVE supported
[   20.085629] SVM: Virtual GIF supported
[   20.089253] MCE: In-kernel MCE decoding enabled.
[   20.121259] EDAC amd64: F17h detected (node 0).
[   20.121340] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.129530] snd_hda_intel 0000:28:00.1: Force to non-snoop mode
[   20.129911] snd_hda_intel 0000:2a:00.3: enabling device (0000 -> 0002)
[   20.175664] EDAC amd64: F17h detected (node 0).
[   20.175710] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.178027] snd_hda_intel 0000:28:00.1: bound 0000:28:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[   20.179361] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:26:00.0/0000:27:00.0/0000:28:00.1/sound/card0/input10
[   20.179403] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:26:00.0/0000:27:00.0/0000:28:00.1/sound/card0/input11
[   20.179451] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:26:00.0/0000:27:00.0/0000:28:00.1/sound/card0/input12
[   20.179485] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:26:00.0/0000:27:00.0/0000:28:00.1/sound/card0/input13
[   20.179521] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:26:00.0/0000:27:00.0/0000:28:00.1/sound/card0/input14
[   20.179552] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:26:00.0/0000:27:00.0/0000:28:00.1/sound/card0/input15
[   20.188169] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   20.188171] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   20.188172] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   20.188173] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   20.188174] snd_hda_codec_realtek hdaudioC1D0:    dig-out=0x1e/0x0
[   20.188175] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   20.188176] snd_hda_codec_realtek hdaudioC1D0:      Front Mic=0x19
[   20.188177] snd_hda_codec_realtek hdaudioC1D0:      Rear Mic=0x18
[   20.188178] snd_hda_codec_realtek hdaudioC1D0:      Line=0x1a
[   20.202760] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input16
[   20.202829] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input17
[   20.202893] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input18
[   20.202955] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input19
[   20.203019] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input20
[   20.203069] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input21
[   20.203115] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:2a:00.3/sound/card1/input22
[   20.229691] EDAC amd64: F17h detected (node 0).
[   20.229731] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.282798] EDAC amd64: F17h detected (node 0).
[   20.282844] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.332965] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[   20.333832] EDAC amd64: F17h detected (node 0).
[   20.333874] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.374556] EDAC amd64: F17h detected (node 0).
[   20.374602] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.432895] EDAC amd64: F17h detected (node 0).
[   20.432936] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.493730] EDAC amd64: F17h detected (node 0).
[   20.493774] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.505013] RPC: Registered named UNIX socket transport module.
[   20.505014] RPC: Registered udp transport module.
[   20.505014] RPC: Registered tcp transport module.
[   20.505014] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   20.540333] EDAC amd64: F17h detected (node 0).
[   20.540368] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.582577] EDAC amd64: F17h detected (node 0).
[   20.582616] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.619487] EDAC amd64: F17h detected (node 0).
[   20.619522] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.658346] EDAC amd64: F17h detected (node 0).
[   20.658382] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.694232] EDAC amd64: F17h detected (node 0).
[   20.694273] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.733591] EDAC amd64: F17h detected (node 0).
[   20.733634] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.765687] EDAC amd64: F17h detected (node 0).
[   20.765729] EDAC amd64: Node 0: DRAM ECC disabled.
[   20.799418] EDAC amd64: F17h detected (node 0).
[   20.799453] EDAC amd64: Node 0: DRAM ECC disabled.
[   23.848537] rfkill: input handler disabled
[   24.002558] igb 0000:22:00.0 enp34s0: igb: enp34s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[   24.109266] IPv6: ADDRCONF(NETDEV_CHANGE): enp34s0: link becomes ready
[   25.968401] input: Yubico YubiKey OTP+FIDO+CCID as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.0/0003:1050:0407.0008/input/input23
[   26.020482] hid-generic 0003:1050:0407.0008: input,hidraw5: USB HID v1.10 Keyboard [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:03:00.0-13/input0
[   27.991636] input: Yubico YubiKey OTP+FIDO+CCID as /devices/pci0000:00/0000:00:01.3/0000:03:00.0/usb1/1-13/1-13:1.0/0003:1050:0407.0009/input/input24
[   28.043470] hid-generic 0003:1050:0407.0009: input,hidraw5: USB HID v1.10 Keyboard [Yubico YubiKey OTP+FIDO+CCID] on usb-0000:03:00.0-13/input0

             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-15 23:17 Steven Haigh [this message]
2020-10-16  1:12 ` Alan Stern

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=SCN9IQ.KCG4KDJJ6OC73@crc.id.au \
    --to=netwiz@crc.id.au \
    --cc=linux-usb@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-usb/0 linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ https://lore.kernel.org/linux-usb \
		linux-usb@vger.kernel.org
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-usb


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git