From: Johan Hovold <johan@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Subject: [GIT PULL] USB-serial updates for 5.12-rc1
Date: Wed, 10 Feb 2021 15:53:39 +0100 [thread overview]
Message-ID: <YCPzc8F35NMwRKQu@hovoldconsulting.com> (raw)
Hi Greg,
Here are the USB-serial updates for 5.12-rc1.
Note that the new MaxLinear/Exar driver can also be used (with fewer features)
in ACM-mode so this pull-request includes a commit to prevent cdc-acm from
binding when the new driver is enabled.
Johan
The following changes since commit 7c53f6b671f4aba70ff15e1b05148b10d58c2837:
Linux 5.11-rc3 (2021-01-10 14:34:50 -0800)
are available in the Git repository at:
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial.git tags/usb-serial-5.12-rc1
for you to fetch changes up to 1542d1324be1191d970f69c55e885af5dd810b84:
USB: serial: drop bogus to_usb_serial_port() checks (2021-02-09 13:14:30 +0100)
----------------------------------------------------------------
USB-serial updates for 5.12-rc1
Here are the USB-serial updates for 5.12-rc1, including:
- a line-speed fix for newer pl2303 devices
- a line-speed fix for FTDI FT-X devices
- a new xr_serial driver for MaxLinear/Exar devices (non-ACM mode)
- a cdc-acm blacklist entry for when the xr_serial driver is enabled
- cp210x support for software flow control
- various cp210x modem-control fixes
- an updated ZTE P685M modem entry to stop claiming the QMI interface
- an update to drop the port_remove() driver-callback return value
Included are also various clean ups.
All have been in linux-next with no reported issues.
----------------------------------------------------------------
Dan Carpenter (2):
USB: serial: mos7840: fix error code in mos7840_write()
USB: serial: mos7720: fix error code in mos7720_write()
Johan Hovold (32):
USB: serial: pl2303: fix line-speed handling on newer chips
USB: serial: cp210x: set IXOFF thresholds
USB: serial: cp210x: update control-characters on every change
USB: serial: cp210x: drop short control-transfer checks
USB: serial: cp210x: drop unused includes
USB: serial: cp210x: add copyright notice
USB: serial: mxuport: drop short control-transfer check
USB: serial: upd78f0730: drop short control-transfer check
USB: serial: io_ti: drop short control-transfer check
USB: serial: io_ti: fix a debug-message copy-paste error
USB: serial: f81232: drop short control-transfer checks
USB: serial: f81534: drop short control-transfer check
USB: serial: xr: fix NULL-deref at probe
USB: serial: xr: fix interface leak at disconnect
USB: serial: xr: use subsystem usb_device at probe
USB: serial: xr: use termios flag helpers
USB: serial: xr: document vendor-request recipient
USB: serial: xr: clean up line-settings handling
USB: serial: xr: simplify line-speed logic
USB: serial: xr: fix gpio-mode handling
USB: serial: xr: fix pin configuration
USB: serial: xr: fix B0 handling
USB: serial: cp210x: suppress modem-control errors
USB: serial: cp210x: fix modem-control handling
USB: serial: cp210x: drop shift macros
USB: serial: cp210x: clean up flow-control debug message
USB: serial: cp210x: clean up printk zero padding
USB: serial: cp210x: fix RTS handling
USB: serial: cp210x: clean up auto-RTS handling
USB: serial: ftdi_sio: fix FTX sub-integer prescaler
USB: serial: ftdi_sio: restore divisor-encoding comments
USB: serial: drop bogus to_usb_serial_port() checks
Lech Perczak (1):
USB: serial: option: update interface mapping for ZTE P685M
Manivannan Sadhasivam (1):
USB: serial: add MaxLinear/Exar USB to Serial driver
Mauro Carvalho Chehab (1):
USB: cdc-acm: ignore Exar XR21V141X when serial driver is built
Tom Rix (1):
USB: serial: mos7720: improve OOM-handling in read_mos_reg()
Uwe Kleine-König (2):
USB: serial: drop if with an always false condition
USB: serial: make remove callback return void
Wang Sheng Long (1):
USB: serial: cp210x: add support for software flow control
drivers/usb/class/cdc-acm.c | 6 +
drivers/usb/serial/Kconfig | 9 +
drivers/usb/serial/Makefile | 1 +
drivers/usb/serial/ark3116.c | 4 +-
drivers/usb/serial/belkin_sa.c | 6 +-
drivers/usb/serial/bus.c | 27 +-
drivers/usb/serial/ch341.c | 4 +-
drivers/usb/serial/cp210x.c | 217 +++++++++---
drivers/usb/serial/cyberjack.c | 6 +-
drivers/usb/serial/cypress_m8.c | 6 +-
drivers/usb/serial/digi_acceleport.c | 6 +-
drivers/usb/serial/f81232.c | 12 +-
drivers/usb/serial/f81534.c | 7 +-
drivers/usb/serial/ftdi_sio.c | 27 +-
drivers/usb/serial/garmin_gps.c | 3 +-
drivers/usb/serial/io_edgeport.c | 6 +-
drivers/usb/serial/io_ti.c | 12 +-
drivers/usb/serial/iuu_phoenix.c | 4 +-
drivers/usb/serial/keyspan.c | 6 +-
drivers/usb/serial/keyspan_pda.c | 4 +-
drivers/usb/serial/kl5kusb105.c | 6 +-
drivers/usb/serial/kobil_sct.c | 6 +-
drivers/usb/serial/mct_u232.c | 6 +-
drivers/usb/serial/metro-usb.c | 4 +-
drivers/usb/serial/mos7720.c | 12 +-
drivers/usb/serial/mos7840.c | 8 +-
drivers/usb/serial/mxuport.c | 7 -
drivers/usb/serial/omninet.c | 6 +-
drivers/usb/serial/opticon.c | 4 +-
drivers/usb/serial/option.c | 3 +-
drivers/usb/serial/oti6858.c | 6 +-
drivers/usb/serial/pl2303.c | 12 +-
drivers/usb/serial/quatech2.c | 4 +-
drivers/usb/serial/sierra.c | 4 +-
drivers/usb/serial/spcp8x5.c | 4 +-
drivers/usb/serial/ssu100.c | 4 +-
drivers/usb/serial/symbolserial.c | 4 +-
drivers/usb/serial/ti_usb_3410_5052.c | 6 +-
drivers/usb/serial/upd78f0730.c | 9 +-
drivers/usb/serial/usb-wwan.h | 2 +-
drivers/usb/serial/usb_wwan.c | 4 +-
drivers/usb/serial/whiteheat.c | 6 +-
drivers/usb/serial/xr_serial.c | 611 ++++++++++++++++++++++++++++++++++
include/linux/usb/serial.h | 2 +-
44 files changed, 888 insertions(+), 225 deletions(-)
create mode 100644 drivers/usb/serial/xr_serial.c
next reply other threads:[~2021-02-10 14:54 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-10 14:53 Johan Hovold [this message]
2021-02-10 14:58 ` [GIT PULL] USB-serial updates for 5.12-rc1 Greg Kroah-Hartman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=YCPzc8F35NMwRKQu@hovoldconsulting.com \
--to=johan@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).