linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
       [not found] <QUKVWQ.1T8HV94AM5X6@gmail.com>
@ 2021-07-26 23:37 ` Razgriz375 (Neil)
  2021-07-27  6:16   ` Greg KH
  0 siblings, 1 reply; 9+ messages in thread
From: Razgriz375 (Neil) @ 2021-07-26 23:37 UTC (permalink / raw)
  To: linux-usb

[-- Attachment #1: Type: text/plain, Size: 700 bytes --]

Hello,

Since updating from 5.10.17, I have not been able to get my Walkman
A55 to work as a USB DAC with my device. My system specs are as
follows:

Surface Pro 4
Pop_OS 21.04 x86_64
Kernel 5.12.10-surface
CPU Intel i5-6300U
Mem 4GB

I can switch back to 5.10.17-surface which I have done and the USB DAC
starts working again. This issue has also been reported in
https://bbs.archlinux.org/viewtopic.php?id=264051&p=2

I'm pretty amateur at linux, but happy to help and provide more
information if required. I guess this is a niche issue as it's not
been reported as far as I can tell.

Desmg output is attached as your spam filter intercepted the raw
information in the email.

Kind regards,

Neil

[-- Attachment #2: Walkman USB DAC Dmesg --]
[-- Type: text/plain, Size: 73968 bytes --]

[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable 
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved 
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] usable 
[    0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] reserved 
[    0.000000] BIOS-e820: [mem 0x0000000040400000-0x000000008ab41fff] usable 
[    0.000000] BIOS-e820: [mem 0x000000008ab42000-0x000000008ab42fff] ACPI NVS 
[    0.000000] BIOS-e820: [mem 0x000000008ab43000-0x000000008ab43fff] reserved 
[    0.000000] BIOS-e820: [mem 0x000000008ab44000-0x000000008bdeffff] usable 
[    0.000000] BIOS-e820: [mem 0x000000008bdf0000-0x000000008be9efff] reserved 
[    0.000000] BIOS-e820: [mem 0x000000008be9f000-0x000000008bec4fff] ACPI NVS 
[    0.000000] BIOS-e820: [mem 0x000000008bec5000-0x000000008befefff] ACPI data 
[    0.000000] BIOS-e820: [mem 0x000000008beff000-0x000000008befffff] usable 
[    0.000000] BIOS-e820: [mem 0x000000008bf00000-0x000000008f7fffff] reserved 
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved 
[    0.000000] BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] reserved 
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016f7fffff] usable 
[    0.000000] NX (Execute Disable) protection: active 
[    0.000000] efi: EFI v2.70 by MSFT 
[    0.000000] efi: ACPI=0x8befe000 ACPI 2.0=0x8befe014 TPMFinalLog=0x8bebb000 SMBIOS=0x8be60000 SMBIOS 3.0=0x8be5e000 MEMATTR=0x88e7e51
8 ESRT=0x88f03118 RNG=0x8be72a18 TPMEventLog=0x88914018  
[    0.000000] efi: seeding entropy pool 
[    0.000000] random: fast init done 
[    0.000000] SMBIOS 3.2.0 present. 
[    0.000000] DMI: Microsoft Corporation Surface Pro 4/Surface Pro 4, BIOS 109.3192.768 03.24.2020 
[    0.000000] tsc: Detected 2500.000 MHz processor 
[    0.000000] tsc: Detected 2499.952 MHz TSC 
[    0.000943] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved 
[    0.000946] e820: remove [mem 0x000a0000-0x000fffff] usable 
[    0.000953] last_pfn = 0x16f800 max_arch_pfn = 0x400000000 
[    0.001131] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT   
[    0.002256] last_pfn = 0x8bf00 max_arch_pfn = 0x400000000 
[    0.016568] esrt: Reserving ESRT space from 0x0000000088f03118 to 0x0000000088f03218. 
[    0.016575] e820: update [mem 0x88f03000-0x88f03fff] usable ==> reserved 
[    0.016616] check: Scanning 1 areas for low memory corruption 
[    0.016621] Using GB pages for direct mapping 
[    0.017026] Secure boot disabled 
[    0.017027] RAMDISK: [mem 0x79f93000-0x7fffffff] 
[    0.017034] ACPI: Early table checksum verification disabled 
[    0.017037] ACPI: RSDP 0x000000008BEFE014 000024 (v02 MSFT  ) 
[    0.017042] ACPI: XSDT 0x000000008BEFD0E8 0000B4 (v01 MSFT   MSFT     00000000 MSFT 0000005F) 
[    0.017048] ACPI: FACP 0x000000008BEFA000 00010C (v05 MSFT   MSFT     00000000 MSFT 0000005F) 
[    0.017054] ACPI: DSDT 0x000000008BEDD000 018057 (v02 MSFT   MSFT     00000000 INTL 20160422) 
[    0.017058] ACPI: FACS 0x000000008BEA9000 000040 
[    0.017062] ACPI: BBRT 0x000000008BEFC000 00002C (v01 MSFT   MSFT     00000002 MSFT 0000005F) 
[    0.017065] ACPI: MSDM 0x000000008BEFB000 000055 (v01 MSFT            00000001 MSFT 00000001) 
[    0.017069] ACPI: HPET 0x000000008BEF9000 000038 (v01 MSFT   MSFT     00000001 MSFT 0000005F) 
[    0.017073] ACPI: APIC 0x000000008BEF8000 00012C (v03 MSFT   MSFT     00000001 MSFT 0000005F) 
[    0.017076] ACPI: MCFG 0x000000008BEF7000 00003C (v01 MSFT   MSFT     00000001 MSFT 0000005F) 
[    0.017080] ACPI: LPIT 0x000000008BEF6000 000094 (v01 MSFT   MSFT     00000000 MSFT 0000005F) 
[    0.017083] ACPI: SSDT 0x000000008BEDA000 00260B (v02 MSFT   RTD3APNV 00001000 INTL 20160422) 
[    0.017087] ACPI: SSDT 0x000000008BED9000 0008CD (v02 MSFT   xh_ap000 00000000 INTL 20160422) 
[    0.017091] ACPI: SSDT 0x000000008BED8000 000574 (v02 MSFT   Tpm2Tabl 00001000 INTL 20160422) 
[    0.017094] ACPI: TPM2 0x000000008BED7000 000034 (v03 MSFT   MSFT     00000002 MSFT 0000005F) 
[    0.017098] ACPI: SSDT 0x000000008BED3000 003151 (v02 SaSsdt SaSsdt   00003000 INTL 20160422) 
[    0.017102] ACPI: SSDT 0x000000008BED1000 0017AE (v02 CpuRef CpuSsdt  00003000 INTL 20160422) 
[    0.017105] ACPI: DMAR 0x000000008BED0000 000088 (v01 MSFT   MSFT     00000001 INTL 00000001) 
[    0.017110] ACPI: NHLT 0x000000008BECF000 00002D (v00 MSFT   MSFT     00000002 MSFT 0000005F) 
[    0.017114] ACPI: BGRT 0x000000008BECE000 000038 (v01 MSFT   MSFT     00000002 MSFT 0000005F) 
[    0.017118] ACPI: WSMT 0x000000008BECD000 000028 (v01 MSFT   MSFT     00000002 MSFT 0000005F) 
[    0.017121] ACPI: FPDT 0x000000008BECC000 000034 (v01 MSFT   MSFT     00000002 MSFT 0000005F) 
[    0.017124] ACPI: Reserving FACP table memory at [mem 0x8befa000-0x8befa10b] 
[    0.017127] ACPI: Reserving DSDT table memory at [mem 0x8bedd000-0x8bef5056] 
[    0.017128] ACPI: Reserving FACS table memory at [mem 0x8bea9000-0x8bea903f] 
[    0.017129] ACPI: Reserving BBRT table memory at [mem 0x8befc000-0x8befc02b] 
[    0.017130] ACPI: Reserving MSDM table memory at [mem 0x8befb000-0x8befb054] 
[    0.017131] ACPI: Reserving HPET table memory at [mem 0x8bef9000-0x8bef9037] 
[    0.017133] ACPI: Reserving APIC table memory at [mem 0x8bef8000-0x8bef812b] 
[    0.017134] ACPI: Reserving MCFG table memory at [mem 0x8bef7000-0x8bef703b] 
[    0.017135] ACPI: Reserving LPIT table memory at [mem 0x8bef6000-0x8bef6093] 
[    0.017136] ACPI: Reserving SSDT table memory at [mem 0x8beda000-0x8bedc60a] 
[    0.017137] ACPI: Reserving SSDT table memory at [mem 0x8bed9000-0x8bed98cc] 
[    0.017138] ACPI: Reserving SSDT table memory at [mem 0x8bed8000-0x8bed8573] 
[    0.017140] ACPI: Reserving TPM2 table memory at [mem 0x8bed7000-0x8bed7033] 
[    0.017141] ACPI: Reserving SSDT table memory at [mem 0x8bed3000-0x8bed6150] 
[    0.017142] ACPI: Reserving SSDT table memory at [mem 0x8bed1000-0x8bed27ad] 
[    0.017143] ACPI: Reserving DMAR table memory at [mem 0x8bed0000-0x8bed0087] 
[    0.017144] ACPI: Reserving NHLT table memory at [mem 0x8becf000-0x8becf02c] 
[    0.017145] ACPI: Reserving BGRT table memory at [mem 0x8bece000-0x8bece037] 
[    0.017147] ACPI: Reserving WSMT table memory at [mem 0x8becd000-0x8becd027] 
[    0.017148] ACPI: Reserving FPDT table memory at [mem 0x8becc000-0x8becc033] 
[    0.017163] ACPI: Local APIC address 0xfee00000 
[    0.017368] No NUMA configuration found 
[    0.017369] Faking a node at [mem 0x0000000000000000-0x000000016f7fffff] 
[    0.017381] NODE_DATA(0) allocated [mem 0x16f7d6000-0x16f7fffff] 
[    0.017747] Zone ranges: 
[    0.017748]   DMA      [mem 0x0000000000001000-0x0000000000ffffff] 
[    0.017750]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff] 
[    0.017753]   Normal   [mem 0x0000000100000000-0x000000016f7fffff] 
[    0.017755]   Device   empty 
[    0.017756] Movable zone start for each node 
[    0.017760] Early memory node ranges 
[    0.017760]   node   0: [mem 0x0000000000001000-0x000000000009ffff] 
[    0.017762]   node   0: [mem 0x0000000000100000-0x000000003fffffff] 
[    0.017764]   node   0: [mem 0x0000000040400000-0x000000008ab41fff] 
[    0.017765]   node   0: [mem 0x000000008ab44000-0x000000008bdeffff] 
[    0.017766]   node   0: [mem 0x000000008beff000-0x000000008befffff] 
[    0.017767]   node   0: [mem 0x0000000100000000-0x000000016f7fffff] 
[    0.017769] Initmem setup node 0 [mem 0x0000000000001000-0x000000016f7fffff] 
[    0.017771] On node 0 totalpages: 1028494 
[    0.017772]   DMA zone: 64 pages used for memmap 
[    0.017774]   DMA zone: 24 pages reserved 
[    0.017775]   DMA zone: 3999 pages, LIFO batch:0 
[    0.018084]   DMA zone: 28769 pages in unavailable ranges 
[    0.018085]   DMA32 zone: 8872 pages used for memmap 
[    0.018086]   DMA32 zone: 567791 pages, LIFO batch:63 
[    0.021882]   DMA32 zone: 17937 pages in unavailable ranges 
[    0.021884]   Normal zone: 7136 pages used for memmap 
[    0.021885]   Normal zone: 456704 pages, LIFO batch:63 
[    0.024830]   Normal zone: 2048 pages in unavailable ranges 
[    0.024844] Reserving Intel graphics memory at [mem 0x8d800000-0x8f7fffff] 
[    0.025334] ACPI: PM-Timer IO Port: 0x1808 
[    0.025341] ACPI: Local APIC address 0xfee00000 
[    0.025349] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) 
[    0.025351] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) 
[    0.025352] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) 
[    0.025353] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) 
[    0.025354] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) 
[    0.025355] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) 
[    0.025356] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) 
[    0.025357] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1]) 
[    0.025358] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1]) 
[    0.025359] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1]) 
[    0.025360] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1]) 
[    0.025360] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1]) 
[    0.025361] ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1]) 
[    0.025362] ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1]) 
[    0.025363] ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1]) 
[    0.025364] ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1]) 
[    0.025391] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119 
[    0.025395] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 
[    0.025397] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) 
[    0.025400] ACPI: IRQ0 used by override. 
[    0.025401] ACPI: IRQ9 used by override. 
[    0.025404] Using ACPI (MADT) for SMP configuration information 
[    0.025405] ACPI: HPET id: 0x8086a201 base: 0xfed00000 
[    0.025414] e820: update [mem 0x88e31000-0x88e63fff] usable ==> reserved 
[    0.025424] TSC deadline timer available 
[    0.025425] smpboot: Allowing 4 CPUs, 0 hotplug CPUs 
[    0.025443] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff] 
[    0.025446] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff] 
[    0.025448] PM: hibernation: Registered nosave memory: [mem 0x40000000-0x403fffff] 
[    0.025450] PM: hibernation: Registered nosave memory: [mem 0x88e31000-0x88e63fff] 
[    0.025452] PM: hibernation: Registered nosave memory: [mem 0x88f03000-0x88f03fff] 
[    0.025454] PM: hibernation: Registered nosave memory: [mem 0x8ab42000-0x8ab42fff] 
[    0.025455] PM: hibernation: Registered nosave memory: [mem 0x8ab43000-0x8ab43fff] 
[    0.025457] PM: hibernation: Registered nosave memory: [mem 0x8bdf0000-0x8be9efff] 
[    0.025458] PM: hibernation: Registered nosave memory: [mem 0x8be9f000-0x8bec4fff] 
[    0.025459] PM: hibernation: Registered nosave memory: [mem 0x8bec5000-0x8befefff] 
[    0.025461] PM: hibernation: Registered nosave memory: [mem 0x8bf00000-0x8f7fffff] 
[    0.025462] PM: hibernation: Registered nosave memory: [mem 0x8f800000-0xdfffffff] 
[    0.025462] PM: hibernation: Registered nosave memory: [mem 0xe0000000-0xefffffff] 
[    0.025463] PM: hibernation: Registered nosave memory: [mem 0xf0000000-0xfe00ffff] 
[    0.025464] PM: hibernation: Registered nosave memory: [mem 0xfe010000-0xfe010fff] 
[    0.025465] PM: hibernation: Registered nosave memory: [mem 0xfe011000-0xffffffff] 
[    0.025467] [mem 0x8f800000-0xdfffffff] available for PCI devices 
[    0.025468] Booting paravirtualized kernel on bare hardware 
[    0.025471] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns 
[    0.025478] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 
[    0.025633] percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288 
[    0.025641] pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152 
[    0.025643] pcpu-alloc: [0] 0 1 2 3  
[    0.025673] Built 1 zonelists, mobility grouping on.  Total pages: 1012398 
[    0.025675] Policy zone: Normal 
[    0.025676] Kernel command line: initrd=\EFI\Pop_OS-42a72843-c385-422e-ba58-25988f813a20\initrd.img root=UUID=42a72843-c385-422e-ba58
-25988f813a20 ro quiet loglevel=0 systemd.show_status=false splash 
[    0.026022] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) 
[    0.026147] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear) 
[    0.026206] mem auto-init: stack:off, heap alloc:on, heap free:off 
[    0.038903] Memory: 3776316K/4113976K available (16393K kernel code, 3497K rwdata, 5464K rodata, 2680K init, 5968K bss, 337400K reser
ved, 0K cma-reserved) 
[    0.038911] random: get_random_u64 called from __kmem_cache_create+0x2d/0x430 with crng_init=1 
[    0.039033] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 
[    0.039046] Kernel/User page tables isolation: enabled 
[    0.039060] ftrace: allocating 48366 entries in 189 pages 
[    0.057892] ftrace: allocated 189 pages with 6 groups 
[    0.057996] rcu: Hierarchical RCU implementation. 
[    0.057998] rcu:     RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4. 
[    0.057999]  Rude variant of Tasks RCU enabled. 
[    0.058000]  Tracing variant of Tasks RCU enabled. 
[    0.058001] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. 
[    0.058002] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 
[    0.062010] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16 
[    0.062508] random: crng done (trusting CPU's manufacturer) 
[    0.062535] Console: colour dummy device 80x25 
[    0.062553] printk: console [tty0] enabled 
[    0.062572] ACPI: Core revision 20210105 
[    0.062828] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns 
[    0.062903] APIC: Switch to symmetric I/O mode setup 
[    0.062905] DMAR: Host address width 39 
[    0.062907] DMAR: DRHD base: 0x000000fed90000 flags: 0x0 
[    0.062914] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e 
[    0.062917] DMAR: DRHD base: 0x000000fed91000 flags: 0x1 
[    0.062920] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da 
[    0.062922] DMAR: RMRR base: 0x0000008d000000 end: 0x0000008f7fffff 
[    0.062925] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1 
[    0.062927] DMAR-IR: HPET id 0 under DRHD base 0xfed91000 
[    0.062928] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping. 
[    0.064483] DMAR-IR: Enabled IRQ remapping in x2apic mode 
[    0.064485] x2apic enabled 
[    0.064502] Switched APIC routing to cluster x2apic. 
[    0.068595] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 
[    0.086837] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x24090c9bc00, max_idle_ns: 440795288559 ns 
[    0.086843] Calibrating delay loop (skipped), value calculated using timer frequency.. 4999.90 BogoMIPS (lpj=9999808) 
[    0.086847] pid_max: default: 32768 minimum: 301 
[    0.089321] LSM: Security Framework initializing 
[    0.089331] Yama: becoming mindful. 
[    0.089355] AppArmor: AppArmor initialized 
[    0.089394] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) 
[    0.089403] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear) 
[    0.089674] CPU0: Thermal monitoring enabled (TM1) 
[    0.089724] process: using mwait in idle threads 
[    0.089726] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 
[    0.089727] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 
[    0.089731] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization 
[    0.089733] Spectre V2 : Mitigation: Full generic retpoline 
[    0.089734] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch 
[    0.089735] Spectre V2 : Enabling Restricted Speculation for firmware calls 
[    0.089736] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier 
[    0.089737] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl 
[    0.089739] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp 
[    0.089742] TAA: Mitigation: Clear CPU buffers 
[    0.089745] SRBDS: Mitigation: Microcode 
[    0.089746] MDS: Mitigation: Clear CPU buffers 
[    0.090021] Freeing SMP alternatives memory: 40K 
[    0.093207] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1187 
[    0.093230] smpboot: CPU0: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz (family: 0x6, model: 0x4e, stepping: 0x3) 
[    0.093393] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver. 
[    0.093410] ... version:                4 
[    0.093411] ... bit width:              48 
[    0.093412] ... generic registers:      4 
[    0.093412] ... value mask:             0000ffffffffffff 
[    0.093413] ... max period:             00007fffffffffff 
[    0.093414] ... fixed-purpose events:   3 
[    0.093415] ... event mask:             000000070000000f 
[    0.093525] rcu: Hierarchical SRCU implementation. 
[    0.094257] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. 
[    0.094312] smp: Bringing up secondary CPUs ... 
[    0.094403] x86: Booting SMP configuration: 
[    0.094404] .... node  #0, CPUs:      #1 #2 
[    0.095402] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.ht
ml for more details. 
[    0.095402] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_as
ync_abort.html for more details. 
[    0.095402]  #3 
[    0.095402] smp: Brought up 1 node, 4 CPUs 
[    0.095402] smpboot: Max logical packages: 1 
[    0.095402] smpboot: Total of 4 processors activated (19999.61 BogoMIPS) 
[    0.096721] devtmpfs: initialized 
[    0.096721] x86/mm: Memory block size: 128MB 
[    0.098946] PM: Registering ACPI NVS region [mem 0x8ab42000-0x8ab42fff] (4096 bytes) 
[    0.098946] PM: Registering ACPI NVS region [mem 0x8be9f000-0x8bec4fff] (155648 bytes) 
[    0.098946] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns 
[    0.098946] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) 
[    0.098983] pinctrl core: initialized pinctrl subsystem 
[    0.099192] PM: RTC time: 22:57:43, date: 2021-07-26 
[    0.099322] NET: Registered protocol family 16 
[    0.099471] DMA: preallocated 512 KiB GFP_KERNEL pool for atomic allocations 
[    0.099508] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations 
[    0.099554] DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations 
[    0.099561] audit: initializing netlink subsys (disabled) 
[    0.099571] audit: type=2000 audit(1627340263.036:1): state=initialized audit_enabled=0 res=1 
[    0.099571] thermal_sys: Registered thermal governor 'fair_share' 
[    0.099571] thermal_sys: Registered thermal governor 'bang_bang' 
[    0.099571] thermal_sys: Registered thermal governor 'step_wise' 
[    0.099571] thermal_sys: Registered thermal governor 'user_space' 
[    0.099571] thermal_sys: Registered thermal governor 'power_allocator' 
[    0.099571] EISA bus registered 
[    0.099571] cpuidle: using governor ladder 
[    0.099571] cpuidle: using governor menu 
[    0.099571] ACPI: bus type PCI registered 
[    0.099571] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 
[    0.099571] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) 
[    0.099571] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 
[    0.099571] PCI: Using configuration type 1 for base access 
[    0.099571] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' 
[    0.100158] Kprobes globally optimized 
[    0.100162] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages 
[    0.100162] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages 
[    0.102912] ACPI: Added _OSI(Module Device) 
[    0.102914] ACPI: Added _OSI(Processor Device) 
[    0.102915] ACPI: Added _OSI(3.0 _SCP Extensions) 
[    0.102916] ACPI: Added _OSI(Processor Aggregator Device) 
[    0.102917] ACPI: Added _OSI(Linux-Dell-Video) 
[    0.102918] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) 
[    0.102919] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) 
[    0.142323] ACPI: 6 ACPI AML tables successfully acquired and loaded 
[    0.144722] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored 
[    0.148634] ACPI: Dynamic OEM Table Load: 
[    0.148648] ACPI: SSDT 0xFFFF896D80F87000 000672 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422) 
[    0.150041] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked 
[    0.151323] ACPI: Dynamic OEM Table Load: 
[    0.151330] ACPI: SSDT 0xFFFF896D80D83C00 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422) 
[    0.152623] ACPI: Dynamic OEM Table Load: 
[    0.152629] ACPI: SSDT 0xFFFF896D80CD9D80 0000BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422) 
[    0.153826] ACPI: Dynamic OEM Table Load: 
[    0.153832] ACPI: SSDT 0xFFFF896D80F86000 000628 (v02 PmRef  HwpLvt   00003000 INTL 20160422) 
[    0.155531] ACPI: Dynamic OEM Table Load: 
[    0.155539] ACPI: SSDT 0xFFFF896D80BBC000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160422) 
[    0.157759] ACPI: Dynamic OEM Table Load: 
[    0.157765] ACPI: SSDT 0xFFFF896D80D80800 000317 (v02 PmRef  ApHwp    00003000 INTL 20160422) 
[    0.159109] ACPI: Dynamic OEM Table Load: 
[    0.159114] ACPI: SSDT 0xFFFF896D80D83800 00030A (v02 PmRef  ApCst    00003000 INTL 20160422) 
[    0.161915] ACPI: EC: EC started 
[    0.161916] ACPI: EC: interrupt blocked 
[    0.165079] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 
[    0.165082] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transactions 
[    0.165084] ACPI: Interpreter enabled 
[    0.165137] ACPI: (supports S0 S4 S5) 
[    0.165138] ACPI: Using IOAPIC for interrupt routing 
[    0.165184] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug 
[    0.165838] ACPI: Enabled 11 GPEs in block 00 to 7F 
[    0.172479] ACPI: PM: Power Resource [PX01] (on) 
[    0.172564] ACPI: PM: Power Resource [PX02] (on) 
[    0.172643] ACPI: PM: Power Resource [PX03] (on) 
[    0.172723] ACPI: PM: Power Resource [PX04] (on) 
[    0.172801] ACPI: PM: Power Resource [PX05] (on) 
[    0.172882] ACPI: PM: Power Resource [PX06] (on) 
[    0.172962] ACPI: PM: Power Resource [PX07] (on) 
[    0.174694] ACPI: PM: Power Resource [USBC] (on) 
[    0.174916] ACPI: PM: Power Resource [PAUD] (on) 
[    0.176976] ACPI: PM: Power Resource [PXP] (off) 
[    0.179355] ACPI: PM: Power Resource [PXP] (off) 
[    0.179638] ACPI: PM: Power Resource [PRWF] (on) 
[    0.191981] ACPI: PM: Power Resource [CAMP] (on) 
[    0.193645] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) 
[    0.193653] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3] 
[    0.197105] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR] 
[    0.199749] PCI host bridge to bus 0000:00 
[    0.199751] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window] 
[    0.199753] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window] 
[    0.199755] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] 
[    0.199757] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window] 
[    0.199758] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window] 
[    0.199759] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window] 
[    0.199761] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window] 
[    0.199762] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window] 
[    0.199763] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window] 
[    0.199765] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window] 
[    0.199766] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window] 
[    0.199767] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window] 
[    0.199769] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window] 
[    0.199770] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window] 
[    0.199771] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window] 
[    0.199772] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window] 
[    0.199774] pci_bus 0000:00: root bus resource [mem 0x8f800000-0xdfffffff window] 
[    0.199775] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window] 
[    0.199777] pci_bus 0000:00: root bus resource [bus 00-fe] 
[    0.199795] pci 0000:00:00.0: [8086:1904] type 00 class 0x060000 
[    0.200789] pci 0000:00:02.0: [8086:1916] type 00 class 0x030000 
[    0.200799] pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 64bit] 
[    0.200806] pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 64bit pref] 
[    0.200811] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f] 
[    0.200828] pci 0000:00:02.0: BAR 2: assigned to efifb 
[    0.201853] pci 0000:00:05.0: [8086:1919] type 00 class 0x048000 
[    0.201863] pci 0000:00:05.0: reg 0x10: [mem 0xa1000000-0xa13fffff 64bit] 
[    0.202877] pci 0000:00:08.0: [8086:1911] type 00 class 0x088000 
[    0.202887] pci 0000:00:08.0: reg 0x10: [mem 0xa1738000-0xa1738fff 64bit] 
[    0.203910] pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330 
[    0.203931] pci 0000:00:14.0: reg 0x10: [mem 0xa1700000-0xa170ffff 64bit] 
[    0.204002] pci 0000:00:14.0: PME# supported from D3hot D3cold 
[    0.205108] pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000 
[    0.205129] pci 0000:00:14.2: reg 0x10: [mem 0xa1739000-0xa1739fff 64bit] 
[    0.206206] pci 0000:00:14.3: [8086:9d32] type 00 class 0x048000 
[    0.206296] pci 0000:00:14.3: reg 0x10: [mem 0xa1710000-0xa171ffff 64bit] 
[    0.207769] pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000 
[    0.207978] pci 0000:00:15.0: reg 0x10: [mem 0xa173a000-0xa173afff 64bit] 
[    0.209961] pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000 
[    0.210170] pci 0000:00:15.1: reg 0x10: [mem 0xa173b000-0xa173bfff 64bit] 
[    0.212146] pci 0000:00:15.2: [8086:9d62] type 00 class 0x118000 
[    0.212355] pci 0000:00:15.2: reg 0x10: [mem 0xa173c000-0xa173cfff 64bit] 
[    0.214337] pci 0000:00:15.3: [8086:9d63] type 00 class 0x118000 
[    0.214546] pci 0000:00:15.3: reg 0x10: [mem 0xa173d000-0xa173dfff 64bit] 
[    0.216404] pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000 
[    0.216428] pci 0000:00:16.0: reg 0x10: [mem 0xa173e000-0xa173efff 64bit] 
[    0.216507] pci 0000:00:16.0: PME# supported from D3hot 
[    0.217556] pci 0000:00:16.4: [8086:9d3e] type 00 class 0x078000 
[    0.217580] pci 0000:00:16.4: reg 0x10: [mem 0xa173f000-0xa173ffff 64bit] 
[    0.217659] pci 0000:00:16.4: PME# supported from D3hot 
[    0.218657] pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400 
[    0.218745] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold 
[    0.219852] pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400 
[    0.219940] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold 
[    0.221045] pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100 
[    0.222164] pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000 
[    0.222180] pci 0000:00:1f.2: reg 0x10: [mem 0xa1734000-0xa1737fff] 
[    0.223236] pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380 
[    0.223260] pci 0000:00:1f.3: reg 0x10: [mem 0xa1730000-0xa1733fff 64bit] 
[    0.223288] pci 0000:00:1f.3: reg 0x20: [mem 0xa1720000-0xa172ffff 64bit] 
[    0.223337] pci 0000:00:1f.3: PME# supported from D3hot D3cold 
[    0.224572] pci 0000:01:00.0: [144d:a802] type 00 class 0x010802 
[    0.224594] pci 0000:01:00.0: reg 0x10: [mem 0xa1600000-0xa1603fff 64bit] 
[    0.224603] pci 0000:01:00.0: reg 0x18: [io  0x3000-0x30ff] 
[    0.224767] pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.5
04 Gb/s with 8.0 GT/s PCIe x4 link) 
[    0.224844] pci 0000:00:1c.0: PCI bridge to [bus 01] 
[    0.224848] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff] 
[    0.224851] pci 0000:00:1c.0:   bridge window [mem 0xa1600000-0xa16fffff] 
[    0.225012] pci 0000:02:00.0: [11ab:2b38] type 00 class 0x020000 
[    0.225042] pci 0000:02:00.0: reg 0x10: [mem 0xa1500000-0xa15fffff 64bit pref] 
[    0.225061] pci 0000:02:00.0: reg 0x18: [mem 0xa1400000-0xa14fffff 64bit pref] 
[    0.225212] pci 0000:02:00.0: supports D1 D2 
[    0.225213] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold 
[    0.225502] pci 0000:00:1d.0: PCI bridge to [bus 02] 
[    0.225510] pci 0000:00:1d.0:   bridge window [mem 0xa1400000-0xa15fffff 64bit pref] 
[    0.229168] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15) 
[    0.229253] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15) 
[    0.229335] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15) 
[    0.229418] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) 
[    0.229499] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15) 
[    0.229580] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15) 
[    0.229662] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15) 
[    0.229743] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15) 
[    0.241402] ACPI Warning: GPE type mismatch (level/edge) (20210105/evxface-791) 
[    0.241425] ACPI: EC: interrupt unblocked 
[    0.241426] ACPI: EC: event unblocked 
[    0.241441] ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62 
[    0.241442] ACPI: EC: GPE=0x50 
[    0.241444] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization complete 
[    0.241446] ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle transactions and events 
[    0.241467] iommu: Default domain type: Translated  
[    0.241467] pci 0000:00:02.0: vgaarb: setting as boot VGA device 
[    0.241467] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none 
[    0.241467] pci 0000:00:02.0: vgaarb: bridge control possible 
[    0.241467] vgaarb: loaded 
[    0.241467] SCSI subsystem initialized 
[    0.241467] libata version 3.00 loaded. 
[    0.241467] ACPI: bus type USB registered 
[    0.241467] usbcore: registered new interface driver usbfs 
[    0.241467] usbcore: registered new interface driver hub 
[    0.241467] usbcore: registered new device driver usb 
[    0.241467] pps_core: LinuxPPS API ver. 1 registered 
[    0.241467] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it> 
[    0.241467] PTP clock support registered 
[    0.241467] EDAC MC: Ver: 3.0.0 
[    0.241467] Registered efivars operations 
[    0.241467] NetLabel: Initializing 
[    0.241467] NetLabel:  domain hash size = 128 
[    0.241467] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO 
[    0.241467] NetLabel:  unlabeled traffic allowed by default 
[    0.243061] PCI: Using ACPI for IRQ routing 
[    0.277358] PCI: pci_cache_line_size set to 64 bytes 
[    0.277840] e820: reserve RAM buffer [mem 0x88e31000-0x8bffffff] 
[    0.277843] e820: reserve RAM buffer [mem 0x88f03000-0x8bffffff] 
[    0.277845] e820: reserve RAM buffer [mem 0x8ab42000-0x8bffffff] 
[    0.277846] e820: reserve RAM buffer [mem 0x8bdf0000-0x8bffffff] 
[    0.277847] e820: reserve RAM buffer [mem 0x8bf00000-0x8bffffff] 
[    0.277848] e820: reserve RAM buffer [mem 0x16f800000-0x16fffffff] 
[    0.279093] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 
[    0.279102] hpet0: 8 comparators, 64-bit 24.000000 MHz counter 
[    0.281165] clocksource: Switched to clocksource tsc-early 
[    0.288666] VFS: Disk quotas dquot_6.6.0 
[    0.288682] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) 
[    0.288791] AppArmor: AppArmor Filesystem Enabled 
[    0.288840] pnp: PnP ACPI init 
[    0.288959] system 00:00: [mem 0x40000000-0x403fffff] has been reserved 
[    0.288967] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) 
[    0.291074] system 00:01: [mem 0xfd000000-0xfdabffff] has been reserved 
[    0.291079] system 00:01: [mem 0xfdad0000-0xfdadffff] has been reserved 
[    0.291081] system 00:01: [mem 0xfdb00000-0xfdffffff] has been reserved 
[    0.291083] system 00:01: [mem 0xfe000000-0xfe01ffff] could not be reserved 
[    0.291085] system 00:01: [mem 0xfe036000-0xfe03bfff] has been reserved 
[    0.291086] system 00:01: [mem 0xfe03d000-0xfe3fffff] has been reserved 
[    0.291088] system 00:01: [mem 0xfe410000-0xfe7fffff] has been reserved 
[    0.291092] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) 
[    0.317678] system 00:02: [io  0x2000-0x20fe] has been reserved 
[    0.317683] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active) 
[    0.332196] system 00:03: [io  0x0680-0x069f] has been reserved 
[    0.332199] system 00:03: [io  0xffff] has been reserved 
[    0.332200] system 00:03: [io  0xffff] has been reserved 
[    0.332202] system 00:03: [io  0xffff] has been reserved 
[    0.332203] system 00:03: [io  0x1800-0x18fe] has been reserved 
[    0.332205] system 00:03: [io  0x164e-0x164f] has been reserved 
[    0.332209] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active) 
[    0.336235] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) 
[    0.336279] system 00:05: [io  0x1854-0x1857] has been reserved 
[    0.336284] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) 
[    0.421672] system 00:06: [mem 0xfe020000-0xfe021fff] has been reserved 
[    0.421675] system 00:06: [mem 0xfe022000-0xfe023fff] has been reserved 
[    0.421676] system 00:06: [mem 0xfe024000-0xfe025fff] has been reserved 
[    0.421678] system 00:06: [mem 0xfe026000-0xfe027fff] has been reserved 
[    0.421680] system 00:06: [mem 0xfe028000-0xfe029fff] has been reserved 
[    0.421681] system 00:06: [mem 0xfe02a000-0xfe02bfff] has been reserved 
[    0.421683] system 00:06: [mem 0xfe02c000-0xfe02dfff] has been reserved 
[    0.421684] system 00:06: [mem 0xfe02e000-0xfe02ffff] has been reserved 
[    0.421686] system 00:06: [mem 0xfe030000-0xfe031fff] has been reserved 
[    0.421688] system 00:06: [mem 0xfe032000-0xfe033fff] has been reserved 
[    0.421689] system 00:06: [mem 0xfe034000-0xfe035fff] has been reserved 
[    0.421693] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active) 
[    0.470587] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved 
[    0.470590] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved 
[    0.470592] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved 
[    0.470593] system 00:07: [mem 0xe0000000-0xefffffff] has been reserved 
[    0.470595] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved 
[    0.470596] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved 
[    0.470598] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved 
[    0.470600] system 00:07: [mem 0xff000000-0xffffffff] has been reserved 
[    0.470601] system 00:07: [mem 0xfee00000-0xfeefffff] has been reserved 
[    0.470603] system 00:07: [mem 0x8f800000-0x8f81ffff] has been reserved 
[    0.470607] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active) 
[    0.515008] pnp: PnP ACPI: found 8 devices 
[    0.520665] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns 
[    0.520727] NET: Registered protocol family 2 
[    0.520783] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear) 
[    0.521488] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear) 
[    0.521512] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear) 
[    0.521577] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear) 
[    0.521617] TCP: Hash tables configured (established 32768 bind 32768) 
[    0.521672] MPTCP token hash table entries: 4096 (order: 4, 98304 bytes, linear) 
[    0.521699] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear) 
[    0.521712] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear) 
[    0.521753] NET: Registered protocol family 1 
[    0.521758] NET: Registered protocol family 44 
[    0.521769] pci 0000:00:1c.0: PCI bridge to [bus 01] 
[    0.521778] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff] 
[    0.521786] pci 0000:00:1c.0:   bridge window [mem 0xa1600000-0xa16fffff] 
[    0.521795] pci 0000:00:1d.0: PCI bridge to [bus 02] 
[    0.521803] pci 0000:00:1d.0:   bridge window [mem 0xa1400000-0xa15fffff 64bit pref] 
[    0.521811] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window] 
[    0.521813] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window] 
[    0.521815] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] 
[    0.521817] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window] 
[    0.521818] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window] 
[    0.521819] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window] 
[    0.521821] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window] 
[    0.521822] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window] 
[    0.521824] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window] 
[    0.521825] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window] 
[    0.521826] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window] 
[    0.521828] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window] 
[    0.521829] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window] 
[    0.521831] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window] 
[    0.521832] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window] 
[    0.521833] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window] 
[    0.521835] pci_bus 0000:00: resource 20 [mem 0x8f800000-0xdfffffff window] 
[    0.521836] pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff window] 
[    0.521838] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff] 
[    0.521839] pci_bus 0000:01: resource 1 [mem 0xa1600000-0xa16fffff] 
[    0.521841] pci_bus 0000:02: resource 2 [mem 0xa1400000-0xa15fffff 64bit pref] 
[    0.522008] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] 
[    0.522556] PCI: CLS 0 bytes, default 64 
[    0.522604] Trying to unpack rootfs image as initramfs... 
[    0.794406] Freeing initrd memory: 98740K 
[    0.794511] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) 
[    0.794513] software IO TLB: mapped [mem 0x0000000082da6000-0x0000000086da6000] (64MB) 
[    0.794719] check: Scanning for low memory corruption every 60 seconds 
[    0.795153] Initialise system trusted keyrings 
[    0.795168] Key type blacklist registered 
[    0.795203] workingset: timestamp_bits=36 max_order=20 bucket_order=0 
[    0.796327] zbud: loaded 
[    0.796598] squashfs: version 4.0 (2009/01/31) Phillip Lougher 
[    0.796730] fuse: init (API version 7.33) 
[    0.796864] integrity: Platform Keyring initialized 
[    0.806548] Key type asymmetric registered 
[    0.806550] Asymmetric key parser 'x509' registered 
[    0.806557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243) 
[    0.806584] io scheduler mq-deadline registered 
[    0.859207] pcieport 0000:00:1c.0: PME: Signaling with IRQ 122 
[    0.907177] pcieport 0000:00:1d.0: PME: Signaling with IRQ 123 
[    0.907272] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 
[    0.907327] efifb: probing for efifb 
[    0.907340] efifb: showing boot graphics 
[    0.908787] efifb: framebuffer at 0x90000000, using 19496k, total 19494k 
[    0.908789] efifb: mode is 2736x1824x32, linelength=10944, pages=1 
[    0.908791] efifb: scrolling: redraw 
[    0.908792] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 
[    0.908834] fbcon: Deferring console take-over 
[    0.908835] fb0: EFI VGA frame buffer device 
[    0.910521] ACPI: AC: AC Adapter [ADP1] (off-line) 
[    0.910637] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0 
[    0.910656] ACPI: button: Lid Switch [LID0] 
[    0.910887] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1187 
[    0.925845] thermal LNXTHERM:00: registered as thermal_zone0 
[    0.925849] ACPI: thermal: Thermal Zone [TZ00] (44 C) 
[    0.945191] thermal LNXTHERM:01: registered as thermal_zone1 
[    0.945194] ACPI: thermal: Thermal Zone [TZ01] (0 C) 
[    0.956784] thermal LNXTHERM:02: registered as thermal_zone2 
[    0.956787] ACPI: thermal: Thermal Zone [TZ02] (38 C) 
[    0.969651] thermal LNXTHERM:03: registered as thermal_zone3 
[    0.969654] ACPI: thermal: Thermal Zone [TZ03] (39 C) 
[    0.970111] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled 
[    0.976609] Linux agpgart interface v0.103 
[    0.995173] tpm_tis IFX0562:00: 2.0 TPM (device-id 0x1A, rev-id 16) 
[    1.097328] ACPI: battery: Slot [BAT1] (battery present) 
[    1.101841] loop: module loaded 
[    1.102174] libphy: Fixed MDIO Bus: probed 
[    1.102176] tun: Universal TUN/TAP device driver, 1.6 
[    1.102243] PPP generic driver version 2.4.2 
[    1.102377] VFIO - User Level meta-driver version: 0.3 
[    1.102483] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 
[    1.102486] ehci-pci: EHCI PCI platform driver 
[    1.102496] ehci-platform: EHCI generic platform driver 
[    1.102510] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver 
[    1.102512] ohci-pci: OHCI PCI platform driver 
[    1.102522] ohci-platform: OHCI generic platform driver 
[    1.102529] uhci_hcd: USB Universal Host Controller Interface driver 
[    1.102563] i8042: PNP: No PS/2 controller found. 
[    1.102662] mousedev: PS/2 mouse device common for all mice 
[    1.102737] rtc_cmos 00:04: RTC can wake from S4 
[    1.103386] rtc_cmos 00:04: registered as rtc0 
[    1.103557] rtc_cmos 00:04: setting system clock to 2021-07-26T22:57:44 UTC (1627340264) 
[    1.103573] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs 
[    1.103580] i2c /dev entries driver 
[    1.103729] device-mapper: uevent: version 1.0.3 
[    1.103794] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com 
[    1.103813] platform eisa.0: Probing EISA bus 0 
[    1.103815] platform eisa.0: EISA: Cannot allocate resource for mainboard 
[    1.103817] platform eisa.0: Cannot allocate resource for EISA slot 1 
[    1.103818] platform eisa.0: Cannot allocate resource for EISA slot 2 
[    1.103819] platform eisa.0: Cannot allocate resource for EISA slot 3 
[    1.103820] platform eisa.0: Cannot allocate resource for EISA slot 4 
[    1.103821] platform eisa.0: Cannot allocate resource for EISA slot 5 
[    1.103822] platform eisa.0: Cannot allocate resource for EISA slot 6 
[    1.103823] platform eisa.0: Cannot allocate resource for EISA slot 7 
[    1.103824] platform eisa.0: Cannot allocate resource for EISA slot 8 
[    1.103826] platform eisa.0: EISA: Detected 0 cards 
[    1.103828] intel_pstate: Intel P-state driver initializing 
[    1.104075] intel_pstate: HWP enabled 
[    1.104102] ledtrig-cpu: registered to indicate activity on CPUs 
[    1.104104] EFI Variables Facility v0.08 2004-May-17 
[    1.115117] intel_pmc_core INT33A1:00:  initialized 
[    1.115210] drop_monitor: Initializing network drop monitor service 
[    1.115372] NET: Registered protocol family 10 
[    1.121600] Segment Routing with IPv6 
[    1.121626] NET: Registered protocol family 17 
[    1.121704] Key type dns_resolver registered 
[    1.121977] microcode: sig=0x406e3, pf=0x80, revision=0xea 
[    1.122046] microcode: Microcode Update Driver: v2.2. 
[    1.122055] IPI shorthand broadcast: enabled 
[    1.122065] sched_clock: Marking stable (1121554354, 488508)->(1126944157, -4901295) 
[    1.122133] registered taskstats version 1 
[    1.122144] Loading compiled-in X.509 certificates 
[    1.122902] Loaded X.509 cert 'Build time autogenerated kernel key: 51e53641509b69336caf8e670c1937fe624918a1' 
[    1.123016] zswap: loaded using pool lzo/zbud 
[    1.123134] Key type ._fscrypt registered 
[    1.123136] Key type .fscrypt registered 
[    1.123137] Key type fscrypt-provisioning registered 
[    1.123184] Key type trusted registered 
[    1.126219] Key type encrypted registered 
[    1.126224] AppArmor: AppArmor sha1 policy hashing enabled 
[    1.126626] ima: Allocated hash algorithm: sha1 
[    1.176709] ima: No architecture policies found 
[    1.176758] evm: Initialising EVM extended attributes: 
[    1.176760] evm: security.selinux 
[    1.176763] evm: security.SMACK64 
[    1.176765] evm: security.SMACK64EXEC 
[    1.176767] evm: security.SMACK64TRANSMUTE 
[    1.176769] evm: security.SMACK64MMAP 
[    1.176771] evm: security.apparmor 
[    1.176772] evm: security.ima 
[    1.176774] evm: security.capability 
[    1.176775] evm: HMAC attrs: 0x1 
[    1.179450] PM:   Magic number: 13:737:1008 
[    1.180095] RAS: Correctable Errors collector initialized. 
[    1.182661] Freeing unused decrypted memory: 2036K 
[    1.183447] Freeing unused kernel image (initmem) memory: 2680K 
[    1.195143] Write protecting the kernel read-only data: 24576k 
[    1.196311] Freeing unused kernel image (text/rodata gap) memory: 2036K 
[    1.196712] Freeing unused kernel image (rodata/data gap) memory: 680K 
[    1.278039] x86/mm: Checked W+X mappings: passed, no W+X pages found. 
[    1.278041] x86/mm: Checking user space page tables 
[    1.330124] x86/mm: Checked W+X mappings: passed, no W+X pages found. 
[    1.330129] Run /init as init process 
[    1.330131]   with arguments: 
[    1.330132]     /init 
[    1.330133]     splash 
[    1.330133]   with environment: 
[    1.330134]     HOME=/ 
[    1.330135]     TERM=linux 
[    1.460016] hid: raw HID events driver (C) Jiri Kosina 
[    1.463254] cryptd: max_cpu_qlen set to 1000 
[    1.464421] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002) 
[    1.464789] idma64 idma64.0: Found Intel integrated DMA 64-bit 
[    1.466468] xhci_hcd 0000:00:14.0: xHCI Host Controller 
[    1.466475] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 
[    1.470092] AVX2 version of gcm_enc/dec engaged. 
[    1.470138] AES CTR mode by8 optimization enabled 
[    1.473121] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000081109810 
[    1.482937] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.12 
[    1.482943] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
[    1.482946] usb usb1: Product: xHCI Host Controller 
[    1.482948] usb usb1: Manufacturer: Linux 5.12.10-surface xhci-hcd 
[    1.482950] usb usb1: SerialNumber: 0000:00:14.0 
[    1.488606] nvme nvme0: pci function 0000:01:00.0 
[    1.488781] hub 1-0:1.0: USB hub found 
[    1.488801] hub 1-0:1.0: 12 ports detected 
[    1.492638] nvme nvme0: 4/0/0 default/read/poll queues 
[    1.494437]  nvme0n1: p1 p2 p3 p4 
[    1.497713] xhci_hcd 0000:00:14.0: xHCI Host Controller 
[    1.497719] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 
[    1.497724] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed 
[    1.497758] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.12 
[    1.497761] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 
[    1.497763] usb usb2: Product: xHCI Host Controller 
[    1.497764] usb usb2: Manufacturer: Linux 5.12.10-surface xhci-hcd 
[    1.497765] usb usb2: SerialNumber: 0000:00:14.0 
[    1.497875] hub 2-0:1.0: USB hub found 
[    1.497901] hub 2-0:1.0: 6 ports detected 
[    1.501028] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002) 
[    1.501273] idma64 idma64.1: Found Intel integrated DMA 64-bit 
[    1.513058] intel-lpss 0000:00:15.2: enabling device (0000 -> 0002) 
[    1.513430] idma64 idma64.2: Found Intel integrated DMA 64-bit 
[    1.522277] intel-lpss 0000:00:15.3: enabling device (0000 -> 0002) 
[    1.522554] idma64 idma64.3: Found Intel integrated DMA 64-bit 
[    1.571677] checking generic (90000000 130a000) vs hw (a0000000 1000000) 
[    1.571687] checking generic (90000000 130a000) vs hw (90000000 10000000) 
[    1.571688] fb0: switching to inteldrmfb from EFI VGA 
[    1.571846] i915 0000:00:02.0: vgaarb: deactivate vga console 
[    1.574868] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem 
[    1.575426] i915 0000:00:02.0: [drm] Finished loading DMC firmware i915/skl_dmc_ver1_27.bin (v1.27) 
[    1.694140] hid-generic 0018:045E:0915.0001: hidraw0: I2C HID v1.00 Device [MSHW0030:00 045E:0915] on i2c-MSHW0030:00 
[    1.758946] usb 1-1: new high-speed USB device number 2 using xhci_hcd 
[    1.822970] tsc: Refined TSC clocksource calibration: 2495.995 MHz 
[    1.823003] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23fa72c04f7, max_idle_ns: 440795326923 ns 
[    1.823054] clocksource: Switched to clocksource tsc 
[    1.908489] usb 1-1: New USB device found, idVendor=054c, idProduct=0ca1, bcdDevice= 1.00 
[    1.908503] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 
[    1.908508] usb 1-1: Product: WALKMAN 
[    1.908513] usb 1-1: Manufacturer: Sony 
[    1.908516] usb 1-1: SerialNumber: 10458B55477916 
[    2.035001] usb 1-7: new full-speed USB device number 3 using xhci_hcd 
[    2.185933] usb 1-7: New USB device found, idVendor=045e, idProduct=07e8, bcdDevice= 2.07 
[    2.185947] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0 
[    2.185953] usb 1-7: Product: Surface Type Cover 
[    2.185957] usb 1-7: Manufacturer: Microsoft 
[    2.195821] usb-storage 1-1:1.0: USB Mass Storage device detected 
[    2.195988] scsi host0: usb-storage 1-1:1.0 
[    2.196113] usbcore: registered new interface driver usb-storage 
[    2.197205] usbcore: registered new interface driver uas 
[    2.198756] input: Microsoft Surface Type Cover Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inp
ut/input1 
[    2.259168] input: Microsoft Surface Type Cover Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/input/
input2 
[    2.259669] input: Microsoft Surface Type Cover as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/input/input3 
[    2.259972] input: Microsoft Surface Type Cover Touchpad as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inp
ut/input4 
[    2.260415] input: Microsoft Surface Type Cover as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/input/input5 
[    2.260688] input: Microsoft Surface Type Cover as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/input/input6 
[    2.260953] input: Microsoft Surface Type Cover as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/input/input7 
[    2.261507] hid-generic 0003:045E:07E8.0002: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [Microsoft Surface Type Cover] on usb-0000
:00:14.0-7/input0 
[    2.261647] usbcore: registered new interface driver usbhid 
[    2.261654] usbhid: USB HID core driver 
[    2.721299] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0 
[    2.728947] ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no) 
[    2.729911] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input9 
[    2.753247] fbcon: i915drmfb (fb0) is primary device 
[    2.753251] fbcon: Deferring console take-over 
[    2.753255] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device 
[    2.854677] system76_acpi: loading out-of-tree module taints kernel. 
[    2.854710] system76_acpi: module verification failed: signature and/or required key missing - tainting kernel 
[    2.858187] system76: Model does not utilize this driver 
[    2.919358] usbcore: registered new interface driver system76-io 
[    3.022876] raid6: avx2x4   gen() 31339 MB/s 
[    3.090876] raid6: avx2x4   xor() 16369 MB/s 
[    3.158878] raid6: avx2x2   gen() 33229 MB/s 
[    3.199313] scsi 0:0:0:0: Direct-Access     SONY     WALKMAN          1.00 PQ: 0 ANSI: 2 
[    3.199504] scsi 0:0:0:1: Direct-Access     SONY     WALKMAN          1.00 PQ: 0 ANSI: 2 
[    3.199649] sd 0:0:0:0: Attached scsi generic sg0 type 0 
[    3.199808] sd 0:0:0:1: Attached scsi generic sg1 type 0 
[    3.200162] sd 0:0:0:0: Power-on or device reset occurred 
[    3.200598] sd 0:0:0:1: Power-on or device reset occurred 
[    3.226878] raid6: avx2x2   xor() 19082 MB/s 
[    3.294880] raid6: avx2x1   gen() 28095 MB/s 
[    3.362877] raid6: avx2x1   xor() 15227 MB/s 
[    3.430882] raid6: sse2x4   gen() 13401 MB/s 
[    3.498878] raid6: sse2x4   xor()  7634 MB/s 
[    3.566878] raid6: sse2x2   gen() 13677 MB/s 
[    3.634881] raid6: sse2x2   xor()  8273 MB/s 
[    3.702884] raid6: sse2x1   gen() 11441 MB/s 
[    3.770881] raid6: sse2x1   xor()  5839 MB/s 
[    3.770881] raid6: using algorithm avx2x2 gen() 33229 MB/s 
[    3.770882] raid6: .... xor() 19082 MB/s, rmw enabled 
[    3.770883] raid6: using avx2x2 recovery algorithm 
[    3.771718] xor: automatically using best checksumming function   avx        
[    3.772426] async_tx: api initialized (async) 
[    3.789789] sd 0:0:0:0: [sda] Attached SCSI removable disk 
[    3.795920] sd 0:0:0:1: [sdb] Attached SCSI removable disk 
[    5.922246] sd 0:0:0:0: [sda] 25959424 512-byte logical blocks: (13.3 GB/12.4 GiB) 
[    5.922570] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
[    5.922575] sda: detected capacity change from 0 to 25959424 
[    5.924023]  sda: 
[   11.970232] sd 0:0:0:1: [sdb] 978255872 512-byte logical blocks: (501 GB/466 GiB) 
[   11.970576] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA 
[   11.970582] sdb: detected capacity change from 0 to 978255872 
[   11.972946]  sdb: sdb1 
[   28.809043] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none. 
[   29.012868] systemd[1]: Inserted module 'autofs4' 
[   29.063875] systemd[1]: Successfully credited entropy passed from boot loader. 
[   29.066646] systemd[1]: systemd 247.3-3ubuntu3.4pop0~1626806865~21.04~19f7a6d running in system mode. (+PAM +AUDIT +SELINUX +IMA +APP
ARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 defaul
t-hierarchy=hybrid) 
[   29.083243] systemd[1]: Detected architecture x86-64. 
[   29.102407] systemd[1]: Set hostname to <bunpad>. 
[   29.264966] systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it di
sables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or '
control-group'. Support for KillMode=none is deprecated and will eventually be removed. 
[   29.294152] systemd[1]: Configuration file /etc/systemd/system/piavpn.service is marked executable. Please remove executable permissi
on bits. Proceeding anyway. 
[   29.304268] systemd[1]: Queued start job for default target Graphical Interface. 
[   29.311141] systemd[1]: Created slice system-modprobe.slice. 
[   29.311431] systemd[1]: Created slice Cryptsetup Units Slice. 
[   29.311634] systemd[1]: Created slice User and Session Slice. 
[   29.311703] systemd[1]: Started Forward Password Requests to Wall Directory Watch. 
[   29.311845] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. 
[   29.311923] systemd[1]: Reached target User and Group Name Lookups. 
[   29.311940] systemd[1]: Reached target Remote File Systems. 
[   29.311949] systemd[1]: Reached target Slices. 
[   29.312032] systemd[1]: Listening on Device-mapper event daemon FIFOs. 
[   29.312118] systemd[1]: Listening on LVM2 poll daemon socket. 
[   29.312191] systemd[1]: Listening on Syslog Socket. 
[   29.312234] systemd[1]: Listening on initctl Compatibility Named Pipe. 
[   29.312402] systemd[1]: Listening on Journal Audit Socket. 
[   29.312478] systemd[1]: Listening on Journal Socket (/dev/log). 
[   29.312573] systemd[1]: Listening on Journal Socket. 
[   29.312687] systemd[1]: Listening on udev Control Socket. 
[   29.312773] systemd[1]: Listening on udev Kernel Socket. 
[   29.313472] systemd[1]: Mounting Huge Pages File System... 
[   29.314218] systemd[1]: Mounting POSIX Message Queue File System... 
[   29.315286] systemd[1]: Mounting Kernel Debug File System... 
[   29.316399] systemd[1]: Mounting Kernel Trace File System... 
[   29.317867] systemd[1]: Starting Journal Service... 
[   29.318200] systemd[1]: Finished Availability of block devices. 
[   29.319707] systemd[1]: Starting Set the console keyboard layout... 
[   29.321037] systemd[1]: Starting Create list of static device nodes for the current kernel... 
[   29.322086] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... 
[   29.323285] systemd[1]: Starting Load Kernel Module configfs... 
[   29.324343] systemd[1]: Starting Load Kernel Module drm... 
[   29.325454] systemd[1]: Starting Load Kernel Module fuse... 
[   29.326659] systemd[1]: Started Nameserver information manager. 
[   29.326837] systemd[1]: Reached target Network (Pre). 
[   29.328008] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. 
[   29.329629] systemd[1]: Starting Load Kernel Modules... 
[   29.330732] systemd[1]: Starting Remount Root and Kernel File Systems... 
[   29.332437] systemd[1]: Starting Coldplug All udev Devices... 
[   29.334593] systemd[1]: Starting Uncomplicated firewall... 
[   29.338017] systemd[1]: Mounted Huge Pages File System. 
[   29.338179] systemd[1]: Mounted POSIX Message Queue File System. 
[   29.338300] systemd[1]: Mounted Kernel Debug File System. 
[   29.338410] systemd[1]: Mounted Kernel Trace File System. 
[   29.339054] systemd[1]: Finished Create list of static device nodes for the current kernel. 
[   29.339519] systemd[1]: modprobe@configfs.service: Succeeded. 
[   29.340031] systemd[1]: Finished Load Kernel Module configfs. 
[   29.340375] systemd[1]: modprobe@drm.service: Succeeded. 
[   29.341002] systemd[1]: Finished Load Kernel Module drm. 
[   29.342227] systemd[1]: modprobe@fuse.service: Succeeded. 
[   29.342658] systemd[1]: Finished Load Kernel Module fuse. 
[   29.344666] ashmem_linux: module is from the staging directory, the quality is unknown, you have been warned. 
[   29.345907] ashmem: initialized 
[   29.346344] systemd[1]: Mounting FUSE Control File System... 
[   29.347616] systemd[1]: Mounting Kernel Configuration File System... 
[   29.349291] EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro. Quota mode: none. 
[   29.359915] systemd[1]: Finished Remount Root and Kernel File Systems. 
[   29.361402] systemd[1]: Finished Uncomplicated firewall. 
[   29.361619] systemd[1]: Mounted FUSE Control File System. 
[   29.361759] systemd[1]: Mounted Kernel Configuration File System. 
[   29.363661] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped. 
[   29.363713] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped. 
[   29.365071] systemd[1]: Starting Load/Save Random Seed... 
[   29.366328] systemd[1]: Starting Create System Users... 
[   29.369127] lp: driver loaded but no devices found 
[   29.378601] ppdev: user-space parallel port driver 
[   29.387588] systemd[1]: Finished Create System Users. 
[   29.388950] systemd[1]: Starting Create Static Device Nodes in /dev... 
[   29.414140] systemd[1]: Finished Load Kernel Modules. 
[   29.415389] systemd[1]: Starting Apply Kernel Variables... 
[   29.417110] systemd[1]: Finished Load/Save Random Seed. 
[   29.417307] systemd[1]: Condition check resulted in First Boot Complete being skipped. 
[   29.420551] systemd[1]: Started Journal Service. 
[   29.428958] systemd-journald[476]: Received client request to flush runtime journal. 
[   29.461123] loop0: detected capacity change from 0 to 203488 
[   29.484970] loop1: detected capacity change from 0 to 24712 
[   29.499303] loop2: detected capacity change from 0 to 113544 
[   29.519159] loop3: detected capacity change from 0 to 126424 
[   29.519412] loop4: detected capacity change from 0 to 203520 
[   29.565187] loop5: detected capacity change from 0 to 126504 
[   29.576700] loop6: detected capacity change from 0 to 662544 
[   29.597038] loop7: detected capacity change from 0 to 333552 
[   29.636685] loop8: detected capacity change from 0 to 132648 
[   29.670626] loop9: detected capacity change from 0 to 337424 
[   29.710130] loop10: detected capacity change from 0 to 133320 
[   29.752842] loop11: detected capacity change from 0 to 113504 
[   29.780962] input: Surface Pro 3/4 Buttons as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C09:00/MSHW0040:00/input/inpu
t10 
[   29.782832] surface_pro3_button MSHW0040:00: Surface Pro 3/4 Buttons [VGBI] 
[   29.787425] loop12: detected capacity change from 0 to 225440 
[   29.830893] mc: Linux media interface: v0.10 
[   29.855577] videodev: Linux video capture interface: v2.00 
[   29.881123] ipu3_imgu: module is from the staging directory, the quality is unknown, you have been warned. 
[   29.895700] ipu3-imgu 0000:00:05.0: enabling device (0000 -> 0002) 
[   29.895870] ipu3-imgu 0000:00:05.0: device 0x1919 (rev: 0x1) 
[   29.895891] ipu3-imgu 0000:00:05.0: physical base address 0x00000000a1000000, 4194304 bytes 
[   29.899426] ipu3-cio2 0000:00:14.3: Found supported sensor INT33BE:00 
[   29.899457] ipu3-cio2 0000:00:14.3: Connected 1 cameras 
[   29.899483] ipu3-cio2 0000:00:14.3: enabling device (0000 -> 0002) 
[   29.899641] ipu3-cio2 0000:00:14.3: device 0x9d32 (rev: 0x1) 
[   29.900377] ov5693 i2c-INT33BE:00: supply avdd not found, using dummy regulator 
[   29.900415] ov5693 i2c-INT33BE:00: supply dovdd not found, using dummy regulator 
[   29.900805] mei_me 0000:00:16.4: enabling device (0004 -> 0006) 
[   29.900856] mei_me 0000:00:16.0: enabling device (0004 -> 0006) 
[   30.001956] pstore: Using crash dump compression: deflate 
[   30.001966] pstore: Registered efi as persistent store backend 
[   30.005920] ipu3-imgu 0000:00:05.0: loaded firmware version irci_irci_ecr-master_20161208_0213_20170112_1500, 17 binaries, 1212984 by
tes 
[   30.018428] cfg80211: Loading compiled-in X.509 certificates for regulatory database 
[   30.025411] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' 
[   30.026175] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer 
[   30.026178] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules 
[   30.026180] RAPL PMU: hw unit of domain package 2^-14 Joules 
[   30.026182] RAPL PMU: hw unit of domain dram 2^-14 Joules 
[   30.026183] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules 
[   30.026185] RAPL PMU: hw unit of domain psys 2^-14 Joules 
[   30.104070] mwifiex_pcie 0000:02:00.0: quirk reset_d3cold enabled 
[   30.104074] mwifiex_pcie 0000:02:00.0: quirk no_brigde_d3 enabled 
[   30.104076] mwifiex_pcie 0000:02:00.0: quirk do_flr_on_bridge enabled 
[   30.104171] mwifiex_pcie 0000:02:00.0: enabling device (0000 -> 0002) 
[   30.104403] mwifiex_pcie: PCI memory map Virt0: ffff9d8fc3400000 PCI memory map Virt2: ffff9d8fc3600000 
[   30.369811] ipts 0000:00:16.4-3e8d0870-271a-4208-8eb5-9acb9402ae04: Starting IPTS 
[   30.377865] ipts 0000:00:16.4-3e8d0870-271a-4208-8eb5-9acb9402ae04: Device 1B96:0021 ready 
[   30.457431] intel_rapl_common: Found RAPL domain package 
[   30.457436] intel_rapl_common: Found RAPL domain core 
[   30.457437] intel_rapl_common: Found RAPL domain uncore 
[   30.457438] intel_rapl_common: Found RAPL domain dram 
[   30.457440] intel_rapl_common: Found RAPL domain psys 
[   30.496993] input: Microsoft Surface Type Cover Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inp
ut/input11 
[   30.559368] input: Microsoft Surface Type Cover Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/input/
input12 
[   30.559554] input: Microsoft Surface Type Cover UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inpu
t/input13 
[   30.559711] input: Microsoft Surface Type Cover Touchpad as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inp
ut/input14 
[   30.559937] input: Microsoft Surface Type Cover UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inpu
t/input15 
[   30.560036] input: Microsoft Surface Type Cover UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inpu
t/input16 
[   30.566569] input: Microsoft Surface Type Cover UNKNOWN as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inpu
t/input17 
[   30.566744] hid-multitouch 0003:045E:07E8.0002: input,hiddev0,hidraw0: USB HID v1.11 Keyboard [Microsoft Surface Type Cover] on usb-0
000:00:14.0-7/input0 
[   30.620167] snd_hda_intel 0000:00:1f.3: DSP detected with PCI class/subclass/prog-if info 0x040380 
[   30.620192] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002) 
[   30.620426] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915]) 
[   30.679089] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker 
[   30.679096] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) 
[   30.679100] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0) 
[   30.679103] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0 
[   30.679105] snd_hda_codec_realtek hdaudioC0D0:    inputs: 
[   30.679107] snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18 
[   30.679109] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12 
[   30.757883] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input19 
[   30.758007] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input20 
[   30.758063] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21 
[   30.765186] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22 
[   30.765461] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23 
[   30.765519] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24 
[   30.765572] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25 
[   31.438257] mwifiex_pcie 0000:02:00.0: info: FW download over, size 723540 bytes 
[   32.187263] usb 1-5: new high-speed USB device number 4 using xhci_hcd 
[   32.339862] usb 1-5: New USB device found, idVendor=1286, idProduct=204c, bcdDevice=32.01 
[   32.339867] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 
[   32.339869] usb 1-5: Product: Bluetooth and Wireless LAN Composite Device 
[   32.339870] usb 1-5: Manufacturer: Marvell 
[   32.339871] usb 1-5: SerialNumber: 0000000000000000 
[   32.371909] Bluetooth: Core ver 2.22 
[   32.371940] NET: Registered protocol family 31 
[   32.371943] Bluetooth: HCI device and connection manager initialized 
[   32.371947] Bluetooth: HCI socket layer initialized 
[   32.371949] Bluetooth: L2CAP socket layer initialized 
[   32.371953] Bluetooth: SCO socket layer initialized 
[   32.380619] usbcore: registered new interface driver btusb 
[   32.382548] Bluetooth: hci0: unexpected event for opcode 0x0000 
[   32.382765] Bluetooth: hci0: unexpected event for opcode 0x0000 
[   32.423442] mwifiex_pcie 0000:02:00.0: WLAN FW is active 
[   32.604912] mwifiex_pcie 0000:02:00.0: info: MWIFIEX VERSION: mwifiex 1.0 (15.68.19.p21)  
[   32.604918] mwifiex_pcie 0000:02:00.0: driver_version = mwifiex 1.0 (15.68.19.p21)  
[   32.606925] mwifiex_pcie 0000:02:00.0 wlp2s0: renamed from mlan0 
[   32.833671] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. 
[   32.838872] FAT-fs (nvme0n1p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. 
[   32.878729] audit: type=1400 audit(1627340296.267:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffi
ce-xpdfimport" pid=908 comm="apparmor_parser" 
[   32.880094] audit: type=1400 audit(1627340296.271:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffi
ce-oosplash" pid=907 comm="apparmor_parser" 
[   32.882511] audit: type=1400 audit(1627340296.271:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/
man" pid=909 comm="apparmor_parser" 
[   32.882518] audit: type=1400 audit(1627340296.271:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filte
r" pid=909 comm="apparmor_parser" 
[   32.882521] audit: type=1400 audit(1627340296.271:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff
" pid=909 comm="apparmor_parser" 
[   32.885931] audit: type=1400 audit(1627340296.275:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffi
ce-senddoc" pid=913 comm="apparmor_parser" 
[   32.890307] audit: type=1400 audit(1627340296.279:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/
lxc-start" pid=917 comm="apparmor_parser" 
[   32.899610] audit: type=1400 audit(1627340296.291:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-conta
iner-default" pid=912 comm="apparmor_parser" 
[   32.899616] audit: type=1400 audit(1627340296.291:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-cont
ainer-default-cgns" pid=912 comm="apparmor_parser" 
[   32.899619] audit: type=1400 audit(1627340296.291:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lxc-cont
ainer-default-with-mounting" pid=912 comm="apparmor_parser" 
[   33.059018] Adding 4193784k swap on /dev/mapper/cryptswap.  Priority:-2 extents:1 across:4193784k SSFS 
[   33.154477] input: IPTS Touch as /devices/virtual/input/input26 
[   33.156670] input: IPTS Stylus as /devices/virtual/input/input27 
[   33.386155] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 
[   33.386160] Bluetooth: BNEP filters: protocol multicast 
[   33.386164] Bluetooth: BNEP socket layer initialized 
[   33.417402] NET: Registered protocol family 38 
[   34.884313] Bluetooth: RFCOMM TTY layer initialized 
[   34.884321] Bluetooth: RFCOMM socket layer initialized 
[   34.884327] Bluetooth: RFCOMM ver 1.11 
[   36.788793] mwifiex_pcie 0000:02:00.0: info: trying to associate to 'Gensokyo' bssid 28:bd:89:c2:a7:59 
[   36.899233] mwifiex_pcie 0000:02:00.0: info: associated to bssid 28:bd:89:c2:a7:59 successfully 
[   36.912973] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready 
[   37.155540] vboxdrv: Found 4 processor cores 
[   37.160692] rfkill: input handler disabled 
[   37.183165] vboxdrv: TSC mode is Invariant, tentative frequency 2495996073 Hz 
[   37.183169] vboxdrv: Successfully loaded version 6.1.18_Pop (interface 0x00300000) 
[   37.199032] VBoxNetFlt: Successfully started. 
[   37.218285] VBoxNetAdp: Successfully started. 
[   37.366940] loop13: detected capacity change from 0 to 8 
[   37.641577] i915 0000:00:02.0: [drm] Reducing the compressed framebuffer size. This may lead to less power savings than a non-reduced
-size. Try to increase stolen memory size if available in BIOS. 
[   44.973110] rfkill: input handler enabled 
[   50.007682] FAT-fs (sda): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. 
[   50.528628] rfkill: input handler disabled 
[   60.456528] process '/usr/bin/glava' started with executable stack 
[   70.407312] VFS: busy inodes on changed media sda 
[   70.407703] sda: detected capacity change from 25959424 to 0 
[   70.464684] sdb: detected capacity change from 978255872 to 0 
[  109.668465] usb 1-1: USB disconnect, device number 2 
[  110.084429] usb 1-1: new high-speed USB device number 5 using xhci_hcd 
[  110.237963] usb 1-1: New USB device found, idVendor=054c, idProduct=0b8c, bcdDevice= 1.00 
[  110.237989] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 
[  110.238002] usb 1-1: Product: WALKMAN 
[  110.238011] usb 1-1: Manufacturer: Sony 
[  110.238019] usb 1-1: SerialNumber: 10458B55477916 
[  110.342104] usb 1-1: 1:7 : unsupported format bits 0x100000000 
[  110.343953] usbcore: registered new interface driver snd-usb-audio


^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
  2021-07-26 23:37 ` Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues Razgriz375 (Neil)
@ 2021-07-27  6:16   ` Greg KH
  2021-07-27  7:43     ` Schmid, Carsten
  0 siblings, 1 reply; 9+ messages in thread
From: Greg KH @ 2021-07-27  6:16 UTC (permalink / raw)
  To: Razgriz375 (Neil); +Cc: linux-usb

On Tue, Jul 27, 2021 at 12:37:28AM +0100, Razgriz375 (Neil) wrote:
> Hello,
> 
> Since updating from 5.10.17, I have not been able to get my Walkman
> A55 to work as a USB DAC with my device. My system specs are as
> follows:
> 
> Surface Pro 4
> Pop_OS 21.04 x86_64
> Kernel 5.12.10-surface
> CPU Intel i5-6300U
> Mem 4GB
> 
> I can switch back to 5.10.17-surface which I have done and the USB DAC
> starts working again. This issue has also been reported in
> https://bbs.archlinux.org/viewtopic.php?id=264051&p=2
> 
> I'm pretty amateur at linux, but happy to help and provide more
> information if required. I guess this is a niche issue as it's not
> been reported as far as I can tell.
> 
> Desmg output is attached as your spam filter intercepted the raw
> information in the email.
> 
> Kind regards,
> 
> Neil

> [  109.668465] usb 1-1: USB disconnect, device number 2 
> [  110.084429] usb 1-1: new high-speed USB device number 5 using xhci_hcd 
> [  110.237963] usb 1-1: New USB device found, idVendor=054c, idProduct=0b8c, bcdDevice= 1.00 
> [  110.237989] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4 
> [  110.238002] usb 1-1: Product: WALKMAN 
> [  110.238011] usb 1-1: Manufacturer: Sony 
> [  110.238019] usb 1-1: SerialNumber: 10458B55477916 
> [  110.342104] usb 1-1: 1:7 : unsupported format bits 0x100000000 
> [  110.343953] usbcore: registered new interface driver snd-usb-audio
> 


Looks like you removed the device and then added it back?  And it says
the device is supported by the kernel now, what does not work properly?

thanks,

greg k-h

^ permalink raw reply	[flat|nested] 9+ messages in thread

* RE: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
  2021-07-27  6:16   ` Greg KH
@ 2021-07-27  7:43     ` Schmid, Carsten
  2021-07-27 11:02       ` AMoonRabbit
  0 siblings, 1 reply; 9+ messages in thread
From: Schmid, Carsten @ 2021-07-27  7:43 UTC (permalink / raw)
  To: Greg KH, Razgriz375 (Neil); +Cc: linux-usb

Hi Greg,

On Tue, Jul 27, 2021 at 12:37:28AM +0100, Razgriz375 (Neil) wrote:

>> [  109.668465] usb 1-1: USB disconnect, device number 2
>> [  110.084429] usb 1-1: new high-speed USB device number 5 using xhci_hcd
>> [  110.237963] usb 1-1: New USB device found, idVendor=054c, idProduct=0b8c, bcdDevice= 1.00
>> [  110.237989] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
>> [  110.238002] usb 1-1: Product: WALKMAN
>> [  110.238011] usb 1-1: Manufacturer: Sony
>> [  110.238019] usb 1-1: SerialNumber: 10458B55477916
>> [  110.342104] usb 1-1: 1:7 : unsupported format bits 0x100000000
>> [  110.343953] usbcore: registered new interface driver snd-usb-audio
>>
>
>
> Looks like you removed the device and then added it back?  And it says
> the device is supported by the kernel now, what does not work properly?

But earlier in boot these messages are seen:
[    1.908489] usb 1-1: New USB device found, idVendor=054c, idProduct=0ca1, bcdDevice= 1.00
[    1.908503] usb 1-1: New USB device strings: Mfr=2, Product=3, SerialNumber=4
[    1.908508] usb 1-1: Product: WALKMAN
[    1.908513] usb 1-1: Manufacturer: Sony
[    1.908516] usb 1-1: SerialNumber: 10458B55477916
[    2.195821] usb-storage 1-1:1.0: USB Mass Storage device detected
[    2.195988] scsi host0: usb-storage 1-1:1.0

ProductId is different, that's strange.

Neil, could you collect the dmesg from the working kernel 5.10 please?
And: is the device expected to be a mass storage (aka USB disk) and sound card in one?

Thanks,
Carsten


-----------------
Siemens Electronic Design Automation GmbH; Anschrift: Arnulfstraße 201, 80634 München; Gesellschaft mit beschränkter Haftung; Geschäftsführer: Thomas Heurung, Frank Thürauf; Sitz der Gesellschaft: München; Registergericht München, HRB 106955

^ permalink raw reply	[flat|nested] 9+ messages in thread

* RE: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
  2021-07-27  7:43     ` Schmid, Carsten
@ 2021-07-27 11:02       ` AMoonRabbit
  2021-07-27 13:02         ` Schmid, Carsten
  0 siblings, 1 reply; 9+ messages in thread
From: AMoonRabbit @ 2021-07-27 11:02 UTC (permalink / raw)
  To: Schmid, Carsten; +Cc: Greg KH, linux-usb

Hello,

So this is the Dmesg output from 5.10.17 with working output to USB DAC 
(Walkman visually gets audio as the amp meter visualiser works where as 
on newer kernels, whilst the system looks to be outputting sound, the 
Walkman shows it's receiving nothing).

DMESG:
[    0.000000]microcode: microcode updated early to revision 0xea, date 
= 2021-01-25
[    0.000000]Linux version 5.10.17-surface (root@60fe0e716c6b) (gcc 
(Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubu
ntu) 2.34) #1 SMP Sat Feb 20 23:29:14 UTC 2021
[    0.000000]Command line: 
initrd=\EFI\Pop_OS-42a72843-c385-422e-ba58-25988f813a20\initrd.img-5.10.17-surface 
root=UUID=42a72843-c385-
422e-ba58-25988f813a20 ro quiet loglevel=0 systemd.show_status=false 
splash
[    0.000000]KERNEL supported cpus:
[    0.000000]  Intel GenuineIntel
[    0.000000]  AMD AuthenticAMD
[    0.000000]  Hygon HygonGenuine
[    0.000000]  Centaur CentaurHauls
[    0.000000]  zhaoxin   Shanghai
[    0.000000]x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating 
point registers'
[    0.000000]x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000]x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000]x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds 
registers'
[    0.000000]x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000]x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000]x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000]x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000]x86/fpu: Enabled xstate features 0x1f, context size is 
960 bytes, using 'compacted' format.
[    0.000000]BIOS-provided physical RAM map:
[    0.000000]BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] 
usable
[    0.000000]BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] 
reserved
[    0.000000]BIOS-e820: [mem 0x0000000000100000-0x000000003fffffff] 
usable
[    0.000000]BIOS-e820: [mem 0x0000000040000000-0x00000000403fffff] 
reserved
[    0.000000]BIOS-e820: [mem 0x0000000040400000-0x000000008ab41fff] 
usable
[    0.000000]BIOS-e820: [mem 0x000000008ab42000-0x000000008ab42fff] 
ACPI NVS
[    0.000000]BIOS-e820: [mem 0x000000008ab43000-0x000000008ab43fff] 
reserved
[    0.000000]BIOS-e820: [mem 0x000000008ab44000-0x000000008bdeffff] 
usable
[    0.000000]BIOS-e820: [mem 0x000000008bdf0000-0x000000008be9efff] 
reserved
[    0.000000]BIOS-e820: [mem 0x000000008be9f000-0x000000008bec4fff] 
ACPI NVS
[    0.000000]BIOS-e820: [mem 0x000000008bec5000-0x000000008befefff] 
ACPI data
[    0.000000]BIOS-e820: [mem 0x000000008beff000-0x000000008befffff] 
usable
[    0.000000]BIOS-e820: [mem 0x000000008bf00000-0x000000008f7fffff] 
reserved
[    0.000000]BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] 
reserved
[    0.000000]BIOS-e820: [mem 0x00000000fe010000-0x00000000fe010fff] 
reserved
[    0.000000]BIOS-e820: [mem 0x0000000100000000-0x000000016f7fffff] 
usable
[    0.000000]NX (Execute Disable) protection: active
[    0.000000]efi: EFI v2.70 by MSFT
[    0.000000]efi: ACPI=0x8befe000 ACPI 2.0=0x8befe014 
TPMFinalLog=0x8bebb000 SMBIOS=0x8be60000 SMBIOS 3.0=0x8be5e000 
MEMATTR=0x8891651
8 ESRT=0x88f03118 RNG=0x8be72a18 TPMEventLog=0x88914018
[    0.000000]efi: seeding entropy pool
[    0.000000]random: fast init done
[    0.000000]SMBIOS 3.2.0 present.
[    0.000000]DMI: Microsoft Corporation Surface Pro 4/Surface Pro 4, 
BIOS 109.3192.768 03.24.2020
[    0.000000]tsc: Detected 2500.000 MHz processor
[    0.000000]tsc: Detected 2499.952 MHz TSC
[    0.000952]e820: update [mem 0x00000000-0x00000fff] usable ==> 
reserved
[    0.000955]e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000962]last_pfn = 0x16f800 max_arch_pfn = 0x400000000
[    0.000966]MTRR default type: write-back
[    0.000967]MTRR fixed ranges enabled:
[    0.000969]  00000-9FFFF write-back
[    0.000970]  A0000-BFFFF uncachable
[    0.000972]  C0000-FFFFF write-protect
[    0.000972]MTRR variable ranges enabled:
[    0.000974]  0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000975]  1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000976]  2 base 0090000000 mask 7FF0000000 uncachable
[    0.000978]  3 base 008E000000 mask 7FFE000000 uncachable
[    0.000979]  4 base 008D000000 mask 7FFF000000 uncachable
[    0.000979]  5 disabled
[    0.000980]  6 disabled
[    0.000981]  7 disabled
[    0.000981]  8 disabled
[    0.000982]  9 disabled
[    0.001577]x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- 
WT
[    0.002008]last_pfn = 0x8bf00 max_arch_pfn = 0x400000000
[    0.016390]esrt: Reserving ESRT space from 0x0000000088f03118 to 
0x0000000088f03218.
[    0.016397]e820: update [mem 0x88f03000-0x88f03fff] usable ==> 
reserved
[    0.016438]check: Scanning 1 areas for low memory corruption
[    0.016443]Using GB pages for direct mapping
[    0.017097]Secure boot disabled
[    0.017099]RAMDISK: [mem 0x7a19f000-0x7fffffff]
[    0.017114]ACPI: Early table checksum verification disabled
[    0.017117]ACPI: RSDP 0x000000008BEFE014 000024 (v02 MSFT  )
[    0.017121]ACPI: XSDT 0x000000008BEFD0E8 0000B4 (v01 MSFT   MSFT     
00000000 MSFT 0000005F)
[    0.017127]ACPI: FACP 0x000000008BEFA000 00010C (v05 MSFT   MSFT     
00000000 MSFT 0000005F)
[    0.017133]ACPI: DSDT 0x000000008BEDD000 018057 (v02 MSFT   MSFT     
00000000 INTL 20160422)
[    0.017137]ACPI: FACS 0x000000008BEA9000 000040
[    0.017140]ACPI: BBRT 0x000000008BEFC000 00002C (v01 MSFT   MSFT     
00000002 MSFT 0000005F)
[    0.017144]ACPI: MSDM 0x000000008BEFB000 000055 (v01 MSFT            
00000001 MSFT 00000001)
[    0.017148]ACPI: HPET 0x000000008BEF9000 000038 (v01 MSFT   MSFT     
00000001 MSFT 0000005F)
[    0.017151]ACPI: APIC 0x000000008BEF8000 00012C (v03 MSFT   MSFT     
00000001 MSFT 0000005F)
[    0.017155]ACPI: MCFG 0x000000008BEF7000 00003C (v01 MSFT   MSFT     
00000001 MSFT 0000005F)
[    0.017159]ACPI: LPIT 0x000000008BEF6000 000094 (v01 MSFT   MSFT     
00000000 MSFT 0000005F)
[    0.017162]ACPI: SSDT 0x000000008BEDA000 00260B (v02 MSFT   RTD3APNV 
00001000 INTL 20160422)
[    0.017166]ACPI: SSDT 0x000000008BED9000 0008CD (v02 MSFT   xh_ap000 
00000000 INTL 20160422)
[    0.017169]ACPI: SSDT 0x000000008BED8000 000574 (v02 MSFT   Tpm2Tabl 
00001000 INTL 20160422)
[    0.017173]ACPI: TPM2 0x000000008BED7000 000034 (v03 MSFT   MSFT     
00000002 MSFT 0000005F)
[    0.017177]ACPI: SSDT 0x000000008BED3000 003151 (v02 SaSsdt SaSsdt   
00003000 INTL 20160422)
[    0.017181]ACPI: SSDT 0x000000008BED1000 0017AE (v02 CpuRef CpuSsdt  
00003000 INTL 20160422)
[    0.017184]ACPI: DMAR 0x000000008BED0000 000088 (v01 MSFT   MSFT     
00000001 INTL 00000001)
[    0.017188]ACPI: NHLT 0x000000008BECF000 00002D (v00 MSFT   MSFT     
00000002 MSFT 0000005F)
[    0.017191]ACPI: BGRT 0x000000008BECE000 000038 (v01 MSFT   MSFT     
00000002 MSFT 0000005F)
[    0.017195]ACPI: WSMT 0x000000008BECD000 000028 (v01 MSFT   MSFT     
00000002 MSFT 0000005F)
[    0.017198]ACPI: FPDT 0x000000008BECC000 000034 (v01 MSFT   MSFT     
00000002 MSFT 0000005F)
[    0.017208]ACPI: Local APIC address 0xfee00000
[    0.017540]No NUMA configuration found
[    0.017541]Faking a node at [mem 
0x0000000000000000-0x000000016f7fffff]
[    0.017552]NODE_DATA(0) allocated [mem 0x16f7d2000-0x16f7fcfff]
[    0.017918]cma: Reserved 32 MiB at 0x000000016d400000
[    0.017934]Zone ranges:
[    0.017935]  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.017937]  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.017939]  Normal   [mem 0x0000000100000000-0x000000016f7fffff]
[    0.017940]  Device   empty
[    0.017941]Movable zone start for each node
[    0.017945]Early memory node ranges
[    0.017946]  node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.017947]  node   0: [mem 0x0000000000100000-0x000000003fffffff]
[    0.017948]  node   0: [mem 0x0000000040400000-0x000000008ab41fff]
[    0.017949]  node   0: [mem 0x000000008ab44000-0x000000008bdeffff]
[    0.017950]  node   0: [mem 0x000000008beff000-0x000000008befffff]
[    0.017951]  node   0: [mem 0x0000000100000000-0x000000016f7fffff]
[    0.018149]Zeroed struct page in unavailable ranges: 20082 pages
[    0.018150]Initmem setup node 0 [mem 
0x0000000000001000-0x000000016f7fffff]
[    0.018152]On node 0 totalpages: 1028494
[    0.018153]  DMA zone: 64 pages used for memmap
[    0.018154]  DMA zone: 24 pages reserved
[    0.018155]  DMA zone: 3999 pages, LIFO batch:0
[    0.018189]  DMA32 zone: 8872 pages used for memmap
[    0.018190]  DMA32 zone: 567791 pages, LIFO batch:63
[    0.021691]  Normal zone: 7136 pages used for memmap
[    0.021692]  Normal zone: 456704 pages, LIFO batch:63
[    0.024549]Reserving Intel graphics memory at [mem 
0x8d800000-0x8f7fffff]
[    0.025046]ACPI: PM-Timer IO Port: 0x1808
[    0.025048]ACPI: Local APIC address 0xfee00000
[    0.025055]ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.025056]ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.025057]ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.025058]ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.025059]ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.025060]ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.025060]ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.025061]ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.025062]ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.025063]ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.025064]ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.025064]ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.025065]ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
[    0.025066]ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
[    0.025067]ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
[    0.025068]ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
[    0.025095]IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 
0-119
[    0.025098]ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.025099]ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high 
level)
[    0.025101]ACPI: IRQ0 used by override.
[    0.025102]ACPI: IRQ9 used by override.
[    0.025104]Using ACPI (MADT) for SMP configuration information
[    0.025106]ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.025115]e820: update [mem 0x88e31000-0x88e63fff] usable ==> 
reserved
[    0.025124]TSC deadline timer available
[    0.025125]smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.025143]PM: hibernation: Registered nosave memory: [mem 
0x00000000-0x00000fff]
[    0.025145]PM: hibernation: Registered nosave memory: [mem 
0x000a0000-0x000fffff]
[    0.025147]PM: hibernation: Registered nosave memory: [mem 
0x40000000-0x403fffff]
[    0.025148]PM: hibernation: Registered nosave memory: [mem 
0x88e31000-0x88e63fff]
[    0.025150]PM: hibernation: Registered nosave memory: [mem 
0x88f03000-0x88f03fff]
[    0.025152]PM: hibernation: Registered nosave memory: [mem 
0x8ab42000-0x8ab42fff]
[    0.025153]PM: hibernation: Registered nosave memory: [mem 
0x8ab43000-0x8ab43fff]
[    0.025155]PM: hibernation: Registered nosave memory: [mem 
0x8bdf0000-0x8be9efff]
[    0.025155]PM: hibernation: Registered nosave memory: [mem 
0x8be9f000-0x8bec4fff]
[    0.025156]PM: hibernation: Registered nosave memory: [mem 
0x8bec5000-0x8befefff]
[    0.025158]PM: hibernation: Registered nosave memory: [mem 
0x8bf00000-0x8f7fffff]
[    0.025159]PM: hibernation: Registered nosave memory: [mem 
0x8f800000-0xdfffffff]
[    0.025160]PM: hibernation: Registered nosave memory: [mem 
0xe0000000-0xefffffff]
[    0.025160]PM: hibernation: Registered nosave memory: [mem 
0xf0000000-0xfe00ffff]
[    0.025161]PM: hibernation: Registered nosave memory: [mem 
0xfe010000-0xfe010fff]
[    0.025162]PM: hibernation: Registered nosave memory: [mem 
0xfe011000-0xffffffff]
[    0.025164][mem 0x8f800000-0xdfffffff] available for PCI devices
[    0.025165]Booting paravirtualized kernel on bare hardware
[    0.025168]clocksource: refined-jiffies: mask: 0xffffffff 
max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.025175]setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 
nr_node_ids:1
[    0.025331]percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u524288
[    0.025337]pcpu-alloc: s192512 r8192 d28672 u524288 alloc=1*2097152
[    0.025339]pcpu-alloc: [0] 0 1 2 3
[    0.025369]Built 1 zonelists, mobility grouping on.  Total pages: 
1012398
[    0.025370]Policy zone: Normal
[    0.025371]Kernel command line: 
initrd=\EFI\Pop_OS-42a72843-c385-422e-ba58-25988f813a20\initrd.img-5.10.17-surface 
root=UUID=42a7284
3-c385-422e-ba58-25988f813a20 ro quiet loglevel=0 
systemd.show_status=false splash
[    0.025711]Dentry cache hash table entries: 524288 (order: 10, 
4194304 bytes, linear)
[    0.025824]Inode-cache hash table entries: 262144 (order: 9, 2097152 
bytes, linear)
[    0.025876]mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.038184]Memory: 3753036K/4113976K available (14345K kernel code, 
3519K rwdata, 5272K rodata, 2664K init, 5960K bss, 327912K reser
ved, 32768K cma-reserved)
[    0.038192]random: get_random_u64 called from 
__kmem_cache_create+0x31/0x430 with crng_init=1
[    0.038314]SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.038327]Kernel/User page tables isolation: enabled
[    0.038340]ftrace: allocating 47603 entries in 186 pages
[    0.057081]ftrace: allocated 186 pages with 5 groups
[    0.057186]rcu: Hierarchical RCU implementation.
[    0.057187]rcu:     RCU restricting CPUs from NR_CPUS=8192 to 
nr_cpu_ids=4.
[    0.057188] Trampoline variant of Tasks RCU enabled.
[    0.057189] Rude variant of Tasks RCU enabled.
[    0.057190] Tracing variant of Tasks RCU enabled.
[    0.057191]rcu: RCU calculated value of scheduler-enlistment delay 
is 25 jiffies.
[    0.057191]rcu: Adjusting geometry for rcu_fanout_leaf=16, 
nr_cpu_ids=4
[    0.061216]NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[    0.061713]random: crng done (trusting CPU's manufacturer)
[    0.061739]Console: colour dummy device 80x25
[    0.061756]printk: console [tty0] enabled
[    0.061775]ACPI: Core revision 20200925
[    0.062031]clocksource: hpet: mask: 0xffffffff max_cycles: 
0xffffffff, max_idle_ns: 79635855245 ns
[    0.062107]APIC: Switch to symmetric I/O mode setup
[    0.062109]DMAR: Host address width 39
[    0.062110]DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.062117]DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 
1c0000c40660462 ecap 7e3ff0505e
[    0.062119]DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.062122]DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap 
d2008c40660462 ecap f050da
[    0.062123]DMAR: RMRR base: 0x0000008d000000 end: 0x0000008f7fffff
[    0.062126]DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.062127]DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.062128]DMAR-IR: Queued invalidation will be enabled to support 
x2apic and Intr-remapping.
[    0.063677]DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.063678]x2apic enabled
[    0.063696]Switched APIC routing to cluster x2apic.
[    0.067777]..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.086040]clocksource: tsc-early: mask: 0xffffffffffffffff 
max_cycles: 0x24090c9bc00, max_idle_ns: 440795288559 ns
[    0.086044]Calibrating delay loop (skipped), value calculated using 
timer frequency.. 4999.90 BogoMIPS (lpj=9999808)
[    0.086047]pid_max: default: 32768 minimum: 301
[    0.088614]LSM: Security Framework initializing
[    0.088626]Yama: becoming mindful.
[    0.088651]AppArmor: AppArmor initialized
[    0.088693]Mount-cache hash table entries: 8192 (order: 4, 65536 
bytes, linear)
[    0.088700]Mountpoint-cache hash table entries: 8192 (order: 4, 
65536 bytes, linear)
[    0.088987]mce: CPU0: Thermal monitoring enabled (TM1)
[    0.089004]process: using mwait in idle threads
[    0.089006]Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.089007]Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.089010]Spectre V1: Mitigation: usercopy/swapgs barriers and 
__user pointer sanitization
[    0.089012]Spectre V2: Mitigation: Full generic retpoline
[    0.089013]Spectre V2: Spectre v2 / SpectreRSB mitigation: Filling 
RSB on context switch
[    0.089013]Spectre V2: Enabling Restricted Speculation for firmware 
calls
[    0.089015]Spectre V2: mitigation: Enabling conditional Indirect 
Branch Prediction Barrier
[    0.089016]Spectre V2: User space: Mitigation: STIBP via seccomp and 
prctl
[    0.089017]Speculative Store Bypass: Mitigation: Speculative Store 
Bypass disabled via prctl and seccomp
[    0.089019]TAA: Mitigation: Clear CPU buffers
[    0.089022]SRBDS: Mitigation: Microcode
[    0.089023]MDS: Mitigation: Clear CPU buffers
[    0.089310]Freeing SMP alternatives memory: 40K
[    0.091940]smpboot: CPU0: Intel(R) Core(TM) i5-6300U CPU @ 2.40GHz 
(family: 0x6, model: 0x4e, stepping: 0x3)
[    0.092114]Performance Events: PEBS fmt3+, Skylake events, 32-deep 
LBR, full-width counters, Intel PMU driver.
[    0.092125]... version:                4
[    0.092126]... bit width:              48
[    0.092127]... generic registers:      4
[    0.092128]... value mask:             0000ffffffffffff
[    0.092128]... max period:             00007fffffffffff
[    0.092129]... fixed-purpose events:   3
[    0.092129]... event mask:             000000070000000f
[    0.092237]rcu: Hierarchical SRCU implementation.
[    0.092960]NMI watchdog: Enabled. Permanently consumes one hw-PMU 
counter.
[    0.093007]smp: Bringing up secondary CPUs ...
[    0.093105]x86: Booting SMP configuration:
[    0.093106].... node  #0, CPUs:      #1 #2
[    0.094630]MDS CPU bug present and SMT on, data leak possible. See 
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.ht
ml for more details.
[    0.094630]TAA CPU bug present and SMT on, data leak possible. See 
https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_as
ync_abort.html for more details.
[    0.094630] #3
[    0.094630]smp: Brought up 1 node, 4 CPUs
[    0.094630]smpboot: Max logical packages: 1
[    0.094630]smpboot: Total of 4 processors activated (19999.61 
BogoMIPS)
[    0.095858]devtmpfs: initialized
[    0.095858]x86/mm: Memory block size: 128MB
[    0.098090]PM: Registering ACPI NVS region [mem 
0x8ab42000-0x8ab42fff] (4096 bytes)
[    0.098092]PM: Registering ACPI NVS region [mem 
0x8be9f000-0x8bec4fff] (155648 bytes)
[    0.098167]clocksource: jiffies: mask: 0xffffffff max_cycles: 
0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.098174]futex hash table entries: 1024 (order: 4, 65536 bytes, 
linear)
[    0.098323]pinctrl core: initialized pinctrl subsystem
[    0.098484]PM: RTC time: 10:57:25, date: 2021-07-27
[    0.098608]NET: Registered protocol family 16
[    0.098728]DMA: preallocated 512 KiB GFP_KERNEL pool for atomic 
allocations
[    0.098728]DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA pool for 
atomic allocations
[    0.098728]DMA: preallocated 512 KiB GFP_KERNEL|GFP_DMA32 pool for 
atomic allocations
[    0.098728]audit: initializing netlink subsys (disabled)
[    0.098728]audit: type=2000 audit(1627383445.036:1): 
state=initialized audit_enabled=0 res=1
[    0.098728]thermal_sys: Registered thermal governor 'fair_share'
[    0.098728]thermal_sys: Registered thermal governor 'bang_bang'
[    0.098728]thermal_sys: Registered thermal governor 'step_wise'
[    0.098728]thermal_sys: Registered thermal governor 'user_space'
[    0.098728]thermal_sys: Registered thermal governor 'power_allocator'
[    0.098728]EISA bus registered
[    0.098728]cpuidle: using governor ladder
[    0.098728]cpuidle: using governor menu
[    0.098728]ACPI: bus type PCI registered
[    0.098728]acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.098728]PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 
0xe0000000-0xefffffff] (base 0xe0000000)
[    0.098728]PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in 
E820
[    0.098728]PCI: Using configuration type 1 for base access
[    0.098728]ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.099318]HugeTLB registered 1.00 GiB page size, pre-allocated 0 
pages
[    0.099318]HugeTLB registered 2.00 MiB page size, pre-allocated 0 
pages
[    0.102139]ACPI: Added _OSI(Module Device)
[    0.102140]ACPI: Added _OSI(Processor Device)
[    0.102141]ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.102142]ACPI: Added _OSI(Processor Aggregator Device)
[    0.102143]ACPI: Added _OSI(Linux-Dell-Video)
[    0.102144]ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.102145]ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.139799]ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.142786]ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.146657]ACPI: Dynamic OEM Table Load:
[    0.146667]ACPI: SSDT 0xFFFF972080C02800 000672 (v02 PmRef  Cpu0Ist  
00003000 INTL 20160422)
[    0.148372]ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[    0.149540]ACPI: Dynamic OEM Table Load:
[    0.149547]ACPI: SSDT 0xFFFF972080E7B000 0003FF (v02 PmRef  Cpu0Cst  
00003001 INTL 20160422)
[    0.151157]ACPI: Dynamic OEM Table Load:
[    0.151163]ACPI: SSDT 0xFFFF972080BFE180 0000BA (v02 PmRef  Cpu0Hwp  
00003000 INTL 20160422)
[    0.152659]ACPI: Dynamic OEM Table Load:
[    0.152665]ACPI: SSDT 0xFFFF972080C04000 000628 (v02 PmRef  HwpLvt   
00003000 INTL 20160422)
[    0.154647]ACPI: Dynamic OEM Table Load:
[    0.154656]ACPI: SSDT 0xFFFF972080C57000 000D14 (v02 PmRef  ApIst    
00003000 INTL 20160422)
[    0.157193]ACPI: Dynamic OEM Table Load:
[    0.157198]ACPI: SSDT 0xFFFF972080E79000 000317 (v02 PmRef  ApHwp    
00003000 INTL 20160422)
[    0.158853]ACPI: Dynamic OEM Table Load:
[    0.158859]ACPI: SSDT 0xFFFF972080E7A000 00030A (v02 PmRef  ApCst    
00003000 INTL 20160422)
[    0.162012]ACPI: EC: EC started
[    0.162013]ACPI: EC: interrupt blocked
[    0.165162]ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.165164]ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle 
transactions
[    0.165165]ACPI: Interpreter enabled
[    0.165217]ACPI: (supports S0 S4 S5)
[    0.165218]ACPI: Using IOAPIC for interrupt routing
[    0.165264]PCI: Using host bridge windows from ACPI; if necessary, 
use "pci=nocrs" and report a bug
[    0.165955]ACPI: Enabled 11 GPEs in block 00 to 7F
[    0.175370]ACPI: Power Resource [PX01] (on)
[    0.175466]ACPI: Power Resource [PX02] (on)
[    0.175551]ACPI: Power Resource [PX03] (on)
[    0.175551]ACPI: Power Resource [PX04] (on)
[    0.175551]ACPI: Power Resource [PX05] (on)
[    0.175551]ACPI: Power Resource [PX06] (on)
[    0.175551]ACPI: Power Resource [PX07] (on)
[    0.176200]ACPI: Power Resource [USBC] (on)
[    0.176425]ACPI: Power Resource [PAUD] (on)
[    0.178991]ACPI: Power Resource [PXP] (off)
[    0.181901]ACPI: Power Resource [PXP] (off)
[    0.182199]ACPI: Power Resource [PRWF] (on)
[    0.192747]ACPI: Power Resource [CAMP] (on)
[    0.198935]ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.198942]acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    0.202423]acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug 
SHPCHotplug PME AER PCIeCapability LTR]
[    0.205107]PCI host bridge to bus 0000:00
[    0.205109]pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 
window]
[    0.205111]pci_bus 0000:00: root bus resource [io  0x0d00-0xffff 
window]
[    0.205112]pci_bus 0000:00: root bus resource [mem 
0x000a0000-0x000bffff window]
[    0.205113]pci_bus 0000:00: root bus resource [mem 
0x000c0000-0x000c3fff window]
[    0.205114]pci_bus 0000:00: root bus resource [mem 
0x000c4000-0x000c7fff window]
[    0.205116]pci_bus 0000:00: root bus resource [mem 
0x000c8000-0x000cbfff window]
[    0.205117]pci_bus 0000:00: root bus resource [mem 
0x000cc000-0x000cffff window]
[    0.205118]pci_bus 0000:00: root bus resource [mem 
0x000d0000-0x000d3fff window]
[    0.205119]pci_bus 0000:00: root bus resource [mem 
0x000d4000-0x000d7fff window]
[    0.205120]pci_bus 0000:00: root bus resource [mem 
0x000d8000-0x000dbfff window]
[    0.205121]pci_bus 0000:00: root bus resource [mem 
0x000dc000-0x000dffff window]
[    0.205122]pci_bus 0000:00: root bus resource [mem 
0x000e0000-0x000e3fff window]
[    0.205123]pci_bus 0000:00: root bus resource [mem 
0x000e4000-0x000e7fff window]
[    0.205125]pci_bus 0000:00: root bus resource [mem 
0x000e8000-0x000ebfff window]
[    0.205127]pci_bus 0000:00: root bus resource [mem 
0x000ec000-0x000effff window]
[    0.205128]pci_bus 0000:00: root bus resource [mem 
0x000f0000-0x000fffff window]
[    0.205130]pci_bus 0000:00: root bus resource [mem 
0x8f800000-0xdfffffff window]
[    0.205131]pci_bus 0000:00: root bus resource [mem 
0xfd000000-0xfe7fffff window]
[    0.205132]pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.205150]pci 0000:00:00.0: [8086:1904] type 00 class 0x060000
[    0.206162]pci 0000:00:02.0: [8086:1916] type 00 class 0x030000
[    0.206172]pci 0000:00:02.0: reg 0x10: [mem 0xa0000000-0xa0ffffff 
64bit]
[    0.206178]pci 0000:00:02.0: reg 0x18: [mem 0x90000000-0x9fffffff 
64bit pref]
[    0.206182]pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.206199]pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.207245]pci 0000:00:05.0: [8086:1919] type 00 class 0x048000
[    0.207255]pci 0000:00:05.0: reg 0x10: [mem 0xa1000000-0xa13fffff 
64bit]
[    0.208285]pci 0000:00:08.0: [8086:1911] type 00 class 0x088000
[    0.208294]pci 0000:00:08.0: reg 0x10: [mem 0xa1738000-0xa1738fff 
64bit]
[    0.209336]pci 0000:00:14.0: [8086:9d2f] type 00 class 0x0c0330
[    0.209357]pci 0000:00:14.0: reg 0x10: [mem 0xa1700000-0xa170ffff 
64bit]
[    0.209427]pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.210543]pci 0000:00:14.2: [8086:9d31] type 00 class 0x118000
[    0.210564]pci 0000:00:14.2: reg 0x10: [mem 0xa1739000-0xa1739fff 
64bit]
[    0.211668]pci 0000:00:14.3: [8086:9d32] type 00 class 0x048000
[    0.211757]pci 0000:00:14.3: reg 0x10: [mem 0xa1710000-0xa171ffff 
64bit]
[    0.213263]pci 0000:00:15.0: [8086:9d60] type 00 class 0x118000
[    0.213471]pci 0000:00:15.0: reg 0x10: [mem 0xa173a000-0xa173afff 
64bit]
[    0.215475]pci 0000:00:15.1: [8086:9d61] type 00 class 0x118000
[    0.215684]pci 0000:00:15.1: reg 0x10: [mem 0xa173b000-0xa173bfff 
64bit]
[    0.217690]pci 0000:00:15.2: [8086:9d62] type 00 class 0x118000
[    0.217899]pci 0000:00:15.2: reg 0x10: [mem 0xa173c000-0xa173cfff 
64bit]
[    0.219893]pci 0000:00:15.3: [8086:9d63] type 00 class 0x118000
[    0.220101]pci 0000:00:15.3: reg 0x10: [mem 0xa173d000-0xa173dfff 
64bit]
[    0.221979]pci 0000:00:16.0: [8086:9d3a] type 00 class 0x078000
[    0.222003]pci 0000:00:16.0: reg 0x10: [mem 0xa173e000-0xa173efff 
64bit]
[    0.222083]pci 0000:00:16.0: PME# supported from D3hot
[    0.223152]pci 0000:00:16.4: [8086:9d3e] type 00 class 0x078000
[    0.223176]pci 0000:00:16.4: reg 0x10: [mem 0xa173f000-0xa173ffff 
64bit]
[    0.223254]pci 0000:00:16.4: PME# supported from D3hot
[    0.224269]pci 0000:00:1c.0: [8086:9d14] type 01 class 0x060400
[    0.224357]pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.225493]pci 0000:00:1d.0: [8086:9d18] type 01 class 0x060400
[    0.225581]pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.226714]pci 0000:00:1f.0: [8086:9d48] type 00 class 0x060100
[    0.227854]pci 0000:00:1f.2: [8086:9d21] type 00 class 0x058000
[    0.227869]pci 0000:00:1f.2: reg 0x10: [mem 0xa1734000-0xa1737fff]
[    0.228949]pci 0000:00:1f.3: [8086:9d70] type 00 class 0x040380
[    0.228972]pci 0000:00:1f.3: reg 0x10: [mem 0xa1730000-0xa1733fff 
64bit]
[    0.229000]pci 0000:00:1f.3: reg 0x20: [mem 0xa1720000-0xa172ffff 
64bit]
[    0.229051]pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.230294]pci 0000:01:00.0: [144d:a802] type 00 class 0x010802
[    0.230315]pci 0000:01:00.0: reg 0x10: [mem 0xa1600000-0xa1603fff 
64bit]
[    0.230324]pci 0000:01:00.0: reg 0x18: [io  0x3000-0x30ff]
[    0.230493]pci 0000:01:00.0: 15.752 Gb/s available PCIe bandwidth, 
limited by 8.0 GT/s PCIe x2 link at 0000:00:1c.0 (capable of 31.5
04 Gb/s with 8.0 GT/s PCIe x4 link)
[    0.230570]pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.230573]pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.230576]pci 0000:00:1c.0:   bridge window [mem 
0xa1600000-0xa16fffff]
[    0.230737]pci 0000:02:00.0: [11ab:2b38] type 00 class 0x020000
[    0.230767]pci 0000:02:00.0: reg 0x10: [mem 0xa1500000-0xa15fffff 
64bit pref]
[    0.230786]pci 0000:02:00.0: reg 0x18: [mem 0xa1400000-0xa14fffff 
64bit pref]
[    0.230938]pci 0000:02:00.0: supports D1 D2
[    0.230939]pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.231227]pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.231235]pci 0000:00:1d.0:   bridge window [mem 
0xa1400000-0xa15fffff 64bit pref]
[    0.236333]ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 
14 15)
[    0.236422]ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 
14 15)
[    0.236506]ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 
14 15)
[    0.236590]ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 
14 15)
[    0.236673]ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 
14 15)
[    0.236756]ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 
14 15)
[    0.236839]ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 
14 15)
[    0.236922]ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 
14 15)
[    0.246378]ACPI Warning: GPE type mismatch (level/edge) 
(20200925/evxface-791)
[    0.246402]ACPI: EC: interrupt unblocked
[    0.246403]ACPI: EC: event unblocked
[    0.246418]ACPI: EC: EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.246418]ACPI: EC: GPE=0x50
[    0.246420]ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC initialization 
complete
[    0.246422]ACPI: \_SB_.PCI0.LPCB.EC0_: EC: Used to handle 
transactions and events
[    0.246525]iommu: Default domain type: Translated
[    0.246525]pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.246525]pci 0000:00:02.0: vgaarb: VGA device added: 
decodes=io+mem,owns=io+mem,locks=none
[    0.246525]pci 0000:00:02.0: vgaarb: bridge control possible
[    0.246525]vgaarb: loaded
[    0.246525]SCSI subsystem initialized
[    0.246525]libata version 3.00 loaded.
[    0.246525]ACPI: bus type USB registered
[    0.246525]usbcore: registered new interface driver usbfs
[    0.246525]usbcore: registered new interface driver hub
[    0.246525]usbcore: registered new device driver usb
[    0.246525]pps_core: LinuxPPS API ver. 1 registered
[    0.246525]pps_core: Software ver. 5.3.6 - Copyright 2005-2007 
Rodolfo Giometti <giometti@linux.it>
[    0.246525]PTP clock support registered
[    0.246525]EDAC MC: Ver: 3.0.0
[    0.246525]Registered efivars operations
[    0.246525]NetLabel: Initializing
[    0.246525]NetLabel:  domain hash size = 128
[    0.246525]NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.246525]NetLabel:  unlabeled traffic allowed by default
[    0.246525]PCI: Using ACPI for IRQ routing
[    0.281816]PCI: pci_cache_line_size set to 64 bytes
[    0.282218]e820: reserve RAM buffer [mem 0x88e31000-0x8bffffff]
[    0.282220]e820: reserve RAM buffer [mem 0x88f03000-0x8bffffff]
[    0.282221]e820: reserve RAM buffer [mem 0x8ab42000-0x8bffffff]
[    0.282222]e820: reserve RAM buffer [mem 0x8bdf0000-0x8bffffff]
[    0.282223]e820: reserve RAM buffer [mem 0x8bf00000-0x8bffffff]
[    0.282224]e820: reserve RAM buffer [mem 0x16f800000-0x16fffffff]
[    0.283283]hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.283291]hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.290043]clocksource: Switched to clocksource tsc-early
[    0.306328]VFS: Disk quotas dquot_6.6.0
[    0.306344]VFS: Dquot-cache hash table entries: 512 (order 0, 4096 
bytes)
[    0.306455]AppArmor: AppArmor Filesystem Enabled
[    0.306493]pnp: PnP ACPI init
[    0.306641]system 00:00: [mem 0x40000000-0x403fffff] has been 
reserved
[    0.306647]system 00:00: Plug and Play ACPI device, IDs PNP0c02 
(active)
[    0.307957]system 00:01: [mem 0xfd000000-0xfdabffff] has been 
reserved
[    0.307959]system 00:01: [mem 0xfdad0000-0xfdadffff] has been 
reserved
[    0.307960]system 00:01: [mem 0xfdb00000-0xfdffffff] has been 
reserved
[    0.307962]system 00:01: [mem 0xfe000000-0xfe01ffff] could not be 
reserved
[    0.307963]system 00:01: [mem 0xfe036000-0xfe03bfff] has been 
reserved
[    0.307965]system 00:01: [mem 0xfe03d000-0xfe3fffff] has been 
reserved
[    0.307966]system 00:01: [mem 0xfe410000-0xfe7fffff] has been 
reserved
[    0.307970]system 00:01: Plug and Play ACPI device, IDs PNP0c02 
(active)
[    0.337541]system 00:02: [io  0x2000-0x20fe] has been reserved
[    0.337546]system 00:02: Plug and Play ACPI device, IDs PNP0c02 
(active)
[    0.351784]system 00:03: [io  0x0680-0x069f] has been reserved
[    0.351785]system 00:03: [io  0xffff] has been reserved
[    0.351787]system 00:03: [io  0xffff] has been reserved
[    0.351788]system 00:03: [io  0xffff] has been reserved
[    0.351789]system 00:03: [io  0x1800-0x18fe] has been reserved
[    0.351790]system 00:03: [io  0x164e-0x164f] has been reserved
[    0.351794]system 00:03: Plug and Play ACPI device, IDs PNP0c02 
(active)
[    0.356685]pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.356730]system 00:05: [io  0x1854-0x1857] has been reserved
[    0.356734]system 00:05: Plug and Play ACPI device, IDs INT3f0d 
PNP0c02 (active)
[    0.452883]system 00:06: [mem 0xfe020000-0xfe021fff] has been 
reserved
[    0.452885]system 00:06: [mem 0xfe022000-0xfe023fff] has been 
reserved
[    0.452887]system 00:06: [mem 0xfe024000-0xfe025fff] has been 
reserved
[    0.452888]system 00:06: [mem 0xfe026000-0xfe027fff] has been 
reserved
[    0.452889]system 00:06: [mem 0xfe028000-0xfe029fff] has been 
reserved
[    0.452891]system 00:06: [mem 0xfe02a000-0xfe02bfff] has been 
reserved
[    0.452892]system 00:06: [mem 0xfe02c000-0xfe02dfff] has been 
reserved
[    0.452893]system 00:06: [mem 0xfe02e000-0xfe02ffff] has been 
reserved
[    0.452895]system 00:06: [mem 0xfe030000-0xfe031fff] has been 
reserved
[    0.452896]system 00:06: [mem 0xfe032000-0xfe033fff] has been 
reserved
[    0.452898]system 00:06: [mem 0xfe034000-0xfe035fff] has been 
reserved
[    0.452902]system 00:06: Plug and Play ACPI device, IDs PNP0c02 
(active)
[    0.498708]system 00:07: [mem 0xfed10000-0xfed17fff] has been 
reserved
[    0.498710]system 00:07: [mem 0xfed18000-0xfed18fff] has been 
reserved
[    0.498711]system 00:07: [mem 0xfed19000-0xfed19fff] has been 
reserved
[    0.498714]system 00:07: [mem 0xe0000000-0xefffffff] has been 
reserved
[    0.498715]system 00:07: [mem 0xfed20000-0xfed3ffff] has been 
reserved
[    0.498717]system 00:07: [mem 0xfed90000-0xfed93fff] could not be 
reserved
[    0.498718]system 00:07: [mem 0xfed45000-0xfed8ffff] has been 
reserved
[    0.498722]system 00:07: [mem 0xff000000-0xffffffff] has been 
reserved
[    0.498723]system 00:07: [mem 0xfee00000-0xfeefffff] has been 
reserved
[    0.498725]system 00:07: [mem 0x8f800000-0x8f81ffff] has been 
reserved
[    0.498729]system 00:07: Plug and Play ACPI device, IDs PNP0c02 
(active)
[    0.520548]pnp: PnP ACPI: found 8 devices
[    0.526371]clocksource: acpi_pm: mask: 0xffffff max_cycles: 
0xffffff, max_idle_ns: 2085701024 ns
[    0.526449]NET: Registered protocol family 2
[    0.526616]tcp_listen_portaddr_hash hash table entries: 2048 (order: 
3, 32768 bytes, linear)
[    0.526640]TCP established hash table entries: 32768 (order: 6, 
262144 bytes, linear)
[    0.526713]TCP bind hash table entries: 32768 (order: 7, 524288 
bytes, linear)
[    0.526780]TCP: Hash tables configured (established 32768 bind 32768)
[    0.526843]MPTCP token hash table entries: 4096 (order: 4, 98304 
bytes, linear)
[    0.526874]UDP hash table entries: 2048 (order: 4, 65536 bytes, 
linear)
[    0.526892]UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, 
linear)
[    0.526934]NET: Registered protocol family 1
[    0.526941]NET: Registered protocol family 44
[    0.526955]pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.526960]pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.526969]pci 0000:00:1c.0:   bridge window [mem 
0xa1600000-0xa16fffff]
[    0.526988]pci 0000:00:1d.0: PCI bridge to [bus 02]
[    0.527002]pci 0000:00:1d.0:   bridge window [mem 
0xa1400000-0xa15fffff 64bit pref]
[    0.527014]pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.527015]pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.527017]pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff 
window]
[    0.527018]pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff 
window]
[    0.527020]pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff 
window]
[    0.527021]pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff 
window]
[    0.527022]pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff 
window]
[    0.527024]pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff 
window]
[    0.527025]pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff 
window]
[    0.527027]pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff 
window]
[    0.527028]pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff 
window]
[    0.527029]pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff 
window]
[    0.527031]pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff 
window]
[    0.527032]pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff 
window]
[    0.527033]pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff 
window]
[    0.527035]pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff 
window]
[    0.527036]pci_bus 0000:00: resource 20 [mem 0x8f800000-0xdfffffff 
window]
[    0.527037]pci_bus 0000:00: resource 21 [mem 0xfd000000-0xfe7fffff 
window]
[    0.527039]pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    0.527040]pci_bus 0000:01: resource 1 [mem 0xa1600000-0xa16fffff]
[    0.527042]pci_bus 0000:02: resource 2 [mem 0xa1400000-0xa15fffff 
64bit pref]
[    0.527246]pci 0000:00:02.0: Video device with shadowed ROM at [mem 
0x000c0000-0x000dffff]
[    0.527917]PCI: CLS 0 bytes, default 64
[    0.527980]Trying to unpack rootfs image as initramfs...
[    0.775330]Freeing initrd memory: 96644K
[    0.775409]PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.775411]software IO TLB: mapped [mem 
0x0000000082da8000-0x0000000086da8000] (64MB)
[    0.775641]check: Scanning for low memory corruption every 60 seconds
[    0.776061]Initialise system trusted keyrings
[    0.776073]Key type blacklist registered
[    0.776111]workingset: timestamp_bits=36 max_order=20 bucket_order=0
[    0.777250]zbud: loaded
[    0.777514]squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.777637]fuse: init (API version 7.32)
[    0.777772]integrity: Platform Keyring initialized
[    0.787424]Key type asymmetric registered
[    0.787426]Asymmetric key parser 'x509' registered
[    0.787435]Block layer SCSI generic (bsg) driver version 0.4 loaded 
(major 243)
[    0.787462]io scheduler mq-deadline registered
[    0.834426]pcieport 0000:00:1c.0: PME: Signaling with IRQ 122
[    0.886387]pcieport 0000:00:1d.0: PME: Signaling with IRQ 123
[    0.886482]shpchp: Standard Hot Plug PCI Controller Driver version: 
0.4
[    0.886539]efifb: probing for efifb
[    0.886552]efifb: showing boot graphics
[    0.887974]efifb: framebuffer at 0x90000000, using 19496k, total 
19494k
[    0.887975]efifb: mode is 2736x1824x32, linelength=10944, pages=1
[    0.887976]efifb: scrolling: redraw
[    0.887977]efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.888017]fbcon: Deferring console take-over
[    0.888018]fb0: EFI VGA frame buffer device
[    0.888025]intel_idle: MWAIT substates: 0x11142120
[    0.888026]intel_idle: v0.5.1 model 0x4E
[    0.888273]intel_idle: Local APIC timer is reliable in all C-states
[    0.889651]ACPI: AC Adapter [ADP1] (on-line)
[    0.889771]input: Lid Switch as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.889789]ACPI: Lid Switch [LID0]
[    0.902529]thermal LNXTHERM:00: registered as thermal_zone0
[    0.902531]ACPI: Thermal Zone [TZ00] (31 C)
[    0.916484]thermal LNXTHERM:01: registered as thermal_zone1
[    0.916486]ACPI: Thermal Zone [TZ01] (0 C)
[    0.927151]thermal LNXTHERM:02: registered as thermal_zone2
[    0.927153]ACPI: Thermal Zone [TZ02] (26 C)
[    0.938688]thermal LNXTHERM:03: registered as thermal_zone3
[    0.938689]ACPI: Thermal Zone [TZ03] (25 C)
[    0.938978]Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    0.944546]Linux agpgart interface v0.103
[    0.962259]tpm_tis IFX0562:00: 2.0 TPM (device-id 0x1A, rev-id 16)
[    1.069511]loop: module loaded
[    1.069870]libphy: Fixed MDIO Bus: probed
[    1.069871]tun: Universal TUN/TAP device driver, 1.6
[    1.069898]PPP generic driver version 2.4.2
[    1.069941]VFIO - User Level meta-driver version: 0.3
[    1.070244]ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.070247]ehci-pci: EHCI PCI platform driver
[    1.070260]ehci-platform: EHCI generic platform driver
[    1.070277]ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.070279]ohci-pci: OHCI PCI platform driver
[    1.070288]ohci-platform: OHCI generic platform driver
[    1.070301]uhci_hcd: USB Universal Host Controller Interface driver
[    1.070358]i8042: PNP: No PS/2 controller found.
[    1.070463]rtc_cmos 00:04: RTC can wake from S4
[    1.071046]rtc_cmos 00:04: registered as rtc0
[    1.071177]rtc_cmos 00:04: setting system clock to 
2021-07-27T10:57:26 UTC (1627383446)
[    1.071198]rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes 
nvram, hpet irqs
[    1.071252]device-mapper: uevent: version 1.0.3
[    1.071318]device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) 
initialised: dm-devel@redhat.com
[    1.071346]platform eisa.0: Probing EISA bus 0
[    1.071349]platform eisa.0: EISA: Cannot allocate resource for 
mainboard
[    1.071351]platform eisa.0: Cannot allocate resource for EISA slot 1
[    1.071352]platform eisa.0: Cannot allocate resource for EISA slot 2
[    1.071353]platform eisa.0: Cannot allocate resource for EISA slot 3
[    1.071354]platform eisa.0: Cannot allocate resource for EISA slot 4
[    1.071356]platform eisa.0: Cannot allocate resource for EISA slot 5
[    1.071357]platform eisa.0: Cannot allocate resource for EISA slot 6
[    1.071358]platform eisa.0: Cannot allocate resource for EISA slot 7
[    1.071359]platform eisa.0: Cannot allocate resource for EISA slot 8
[    1.071361]platform eisa.0: EISA: Detected 0 cards
[    1.071364]intel_pstate: Intel P-state driver initializing
[    1.072050]intel_pstate: HWP enabled
[    1.072257]ledtrig-cpu: registered to indicate activity on CPUs
[    1.072259]EFI Variables Facility v0.08 2004-May-17
[    1.091777]battery: ACPI: Battery Slot [BAT1] (battery present)
[    1.095847]intel_pmc_core INT33A1:00:  initialized
[    1.095916]drop_monitor: Initializing network drop monitor service
[    1.096049]NET: Registered protocol family 10
[    1.101144]Segment Routing with IPv6
[    1.101166]NET: Registered protocol family 17
[    1.101196]Key type dns_resolver registered
[    1.101430]microcode: sig=0x406e3, pf=0x80, revision=0xea
[    1.101464]microcode: Microcode Update Driver: v2.2.
[    1.101468]IPI shorthand broadcast: enabled
[    1.101475]sched_clock: Marking stable (1100974252, 
486043)->(1103956934, -2496639)
[    1.101559]registered taskstats version 1
[    1.101574]Loading compiled-in X.509 certificates
[    1.102162]Loaded X.509 cert 'Build time autogenerated kernel key: 
78c087fff7762bc7d7aa17c86f3b971aceb33f73'
[    1.102181]zswap: loaded using pool lzo/zbud
[    1.102354]Key type ._fscrypt registered
[    1.102355]Key type .fscrypt registered
[    1.102356]Key type fscrypt-provisioning registered
[    1.102394]Key type trusted registered
[    1.104990]Key type encrypted registered
[    1.104994]AppArmor: AppArmor sha1 policy hashing enabled
[    1.105599]ima: Allocated hash algorithm: sha1
[    1.166337]ima: No architecture policies found
[    1.166377]evm: Initialising EVM extended attributes:
[    1.166380]evm: security.selinux
[    1.166381]evm: security.SMACK64
[    1.166383]evm: security.SMACK64EXEC
[    1.166384]evm: security.SMACK64TRANSMUTE
[    1.166386]evm: security.SMACK64MMAP
[    1.166388]evm: security.apparmor
[    1.166389]evm: security.ima
[    1.166391]evm: security.capability
[    1.166393]evm: HMAC attrs: 0x1
[    1.169094]PM:   Magic number: 13:537:983
[    1.169698]RAS: Correctable Errors collector initialized.
[    1.172394]Freeing unused decrypted memory: 2036K
[    1.173172]Freeing unused kernel image (initmem) memory: 2664K
[    1.173237]Write protecting the kernel read-only data: 22528k
[    1.174348]Freeing unused kernel image (text/rodata gap) memory: 
2036K
[    1.174824]Freeing unused kernel image (rodata/data gap) memory: 872K
[    1.253648]x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.253649]x86/mm: Checking user space page tables
[    1.303828]x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.303833]Run /init as init process
[    1.303834]  with arguments:
[    1.303835]    /init
[    1.303835]    splash
[    1.303836]  with environment:
[    1.303836]    HOME=/
[    1.303837]    TERM=linux
[    1.424825]cryptd: max_cpu_qlen set to 1000
[    1.425197]hid: raw HID events driver (C) Jiri Kosina
[    1.429687]xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.429694]xhci_hcd 0000:00:14.0: new USB bus registered, assigned 
bus number 1
[    1.430784]xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 
0x100 quirks 0x0000000081109810
[    1.431047]xhci_hcd 0000:00:14.0: cache line size of 64 is not 
supported
[    1.431917]AVX2 version of gcm_enc/dec engaged.
[    1.431918]AES CTR mode by8 optimization enabled
[    1.437111]intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    1.437447]idma64 idma64.0: Found Intel integrated DMA 64-bit
[    1.439027]usb usb1: New USB device found, idVendor=1d6b, 
idProduct=0002, bcdDevice= 5.10
[    1.439030]usb usb1: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.439032]usb usb1: Product: xHCI Host Controller
[    1.439033]usb usb1: Manufacturer: Linux 5.10.17-surface xhci-hcd
[    1.439035]usb usb1: SerialNumber: 0000:00:14.0
[    1.439480]hub 1-0:1.0: USB hub found
[    1.439503]hub 1-0:1.0: 12 ports detected
[    1.445386]xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.445391]xhci_hcd 0000:00:14.0: new USB bus registered, assigned 
bus number 2
[    1.445395]xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[    1.445991]usb usb2: New USB device found, idVendor=1d6b, 
idProduct=0003, bcdDevice= 5.10
[    1.445993]usb usb2: New USB device strings: Mfr=3, Product=2, 
SerialNumber=1
[    1.445996]usb usb2: Product: xHCI Host Controller
[    1.445997]usb usb2: Manufacturer: Linux 5.10.17-surface xhci-hcd
[    1.445998]usb usb2: SerialNumber: 0000:00:14.0
[    1.450430]hub 2-0:1.0: USB hub found
[    1.450451]hub 2-0:1.0: 6 ports detected
[    1.451696]intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    1.452048]nvme nvme0: pci function 0000:01:00.0
[    1.452236]idma64 idma64.1: Found Intel integrated DMA 64-bit
[    1.458689]intel-lpss 0000:00:15.2: enabling device (0000 -> 0002)
[    1.459002]idma64 idma64.2: Found Intel integrated DMA 64-bit
[    1.459303]intel-lpss 0000:00:15.3: enabling device (0000 -> 0002)
[    1.459559]idma64 idma64.3: Found Intel integrated DMA 64-bit
[    1.462432]nvme nvme0: 4/0/0 default/read/poll queues
[    1.464077] nvme0n1: p1 p2 p3 p4
[    1.538109]i2c_hid i2c-MSHW0030:00: supply vdd not found, using 
dummy regulator
[    1.538232]i2c_hid i2c-MSHW0030:00: supply vddl not found, using 
dummy regulator
[    1.613224]checking generic (90000000 130a000) vs hw (a0000000 
1000000)
[    1.613225]checking generic (90000000 130a000) vs hw (90000000 
10000000)
[    1.613226]fb0: switching to inteldrmfb from EFI VGA
[    1.613282]i915 0000:00:02.0: vgaarb: deactivate vga console
[    1.616344]i915 0000:00:02.0: vgaarb: changed VGA decodes: 
olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.616806]i915 0000:00:02.0: [drm] Finished loading DMC firmware 
i915/skl_dmc_ver1_27.bin (v1.27)
[    1.640057][drm] Initialized i915 1.6.0 20200917 for 0000:00:02.0 on 
minor 0
[    1.642662]ACPI: Video Device [GFX0] (multi-head: yes  rom: no  
post: no)
[    1.643012]input: Video Bus as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input1
[    1.655435]fbcon: i915drmfb (fb0) is primary device
[    1.655437]fbcon: Deferring console take-over
[    1.655441]i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer 
device
[    1.752331]hid-generic 0018:045E:0915.0001: hidraw0: I2C HID v1.00 
Device [MSHW0030:00 045E:0915] on i2c-MSHW0030:00
[    1.782127]usb 1-7: new full-speed USB device number 2 using xhci_hcd
[    1.790126]tsc: Refined TSC clocksource calibration: 2495.999 MHz
[    1.790140]clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 
0x23fa763a3d1, max_idle_ns: 440795313647 ns
[    1.790171]clocksource: Switched to clocksource tsc
[    1.931445]usb 1-7: New USB device found, idVendor=045e, 
idProduct=07e8, bcdDevice= 2.07
[    1.931447]usb 1-7: New USB device strings: Mfr=1, Product=2, 
SerialNumber=0
[    1.931448]usb 1-7: Product: Surface Type Cover
[    1.931449]usb 1-7: Manufacturer: Microsoft
[    1.937746]input: Microsoft Surface Type Cover Keyboard as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inp
ut/input2
[    1.938048]raid6: avx2x4   gen() 31473 MB/s
[    1.994166]input: Microsoft Surface Type Cover Mouse as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/input/
input3
[    1.994222]input: Microsoft Surface Type Cover Consumer Control as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.
0002/input/input4
[    1.994265]input: Microsoft Surface Type Cover as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/input/input5
[    1.994304]input: Microsoft Surface Type Cover Touchpad as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inp
ut/input6
[    1.994343]input: Microsoft Surface Type Cover as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/input/input7
[    1.994380]input: Microsoft Surface Type Cover as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/input/input8
[    1.994416]input: Microsoft Surface Type Cover as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/input/input9
[    1.994485]hid-generic 0003:045E:07E8.0002: input,hiddev0,hidraw0: 
USB HID v1.11 Keyboard [Microsoft Surface Type Cover] on usb-0000
:00:14.0-7/input0
[    1.994511]usbcore: registered new interface driver usbhid
[    1.994512]usbhid: USB HID core driver
[    2.006084]raid6: avx2x4   xor() 15312 MB/s
[    2.074086]raid6: avx2x2   gen() 32409 MB/s
[    2.142081]raid6: avx2x2   xor() 19021 MB/s
[    2.210085]raid6: avx2x1   gen() 27643 MB/s
[    2.278084]raid6: avx2x1   xor() 15231 MB/s
[    2.346082]raid6: sse2x4   gen() 13506 MB/s
[    2.414082]raid6: sse2x4   xor()  7802 MB/s
[    2.482085]raid6: sse2x2   gen() 13662 MB/s
[    2.550083]raid6: sse2x2   xor()  8315 MB/s
[    2.618084]raid6: sse2x1   gen() 11528 MB/s
[    2.686083]raid6: sse2x1   xor()  5884 MB/s
[    2.686084]raid6: using algorithm avx2x2 gen() 32409 MB/s
[    2.686085]raid6: .... xor() 19021 MB/s, rmw enabled
[    2.686086]raid6: using avx2x2 recovery algorithm
[    2.687023]xor: automatically using best checksumming function   avx
[    2.687733]async_tx: api initialized (async)
[   12.202312]usb 1-1: new high-speed USB device number 3 using xhci_hcd
[   12.351838]usb 1-1: New USB device found, idVendor=054c, 
idProduct=0b8c, bcdDevice= 1.00
[   12.351844]usb 1-1: New USB device strings: Mfr=2, Product=3, 
SerialNumber=4
[   12.351847]usb 1-1: Product: WALKMAN
[   12.351850]usb 1-1: Manufacturer: Sony
[   12.351852]usb 1-1: SerialNumber: 10458B55477916
[   36.849562]EXT4-fs (dm-1): mounted filesystem with ordered data 
mode. Opts: (null)
[   37.091396]systemd[1]: Inserted module 'autofs4'
[   37.140225]systemd[1]: Successfully credited entropy passed from 
boot loader.
[   37.143659]systemd[1]: systemd 
247.3-3ubuntu3.4pop0~1626806865~21.04~19f7a6d running in system mode. 
(+PAM +AUDIT +SELINUX +IMA +APP
ARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ 
+LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 defaul
t-hierarchy=hybrid)
[   37.162213]systemd[1]: Detected architecture x86-64.
[   37.180029]systemd[1]: Set hostname to <bunpad>.
[   37.340538]systemd[1]: 
/lib/systemd/system/plymouth-start.service:17: Unit configured to use 
KillMode=none. This is unsafe, as it di
sables systemd's process lifecycle management for the service. Please 
update your service to use a safer KillMode=, such as 'mixed' or '
control-group'. Support for KillMode=none is deprecated and will 
eventually be removed.
[   37.370222]systemd[1]: Configuration file 
/etc/systemd/system/piavpn.service is marked executable. Please remove 
executable permissi
on bits. Proceeding anyway.
[   37.380436]systemd[1]: Queued start job for default target Graphical 
Interface.
[   37.387194]systemd[1]: Created slice system-modprobe.slice.
[   37.387482]systemd[1]: Created slice Cryptsetup Units Slice.
[   37.387696]systemd[1]: Created slice User and Session Slice.
[   37.387762]systemd[1]: Started Forward Password Requests to Wall 
Directory Watch.
[   37.387903]systemd[1]: Set up automount Arbitrary Executable File 
Formats File System Automount Point.
[   37.387978]systemd[1]: Reached target User and Group Name Lookups.
[   37.387997]systemd[1]: Reached target Remote File Systems.
[   37.388006]systemd[1]: Reached target Slices.
[   37.388087]systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   37.388174]systemd[1]: Listening on LVM2 poll daemon socket.
[   37.388245]systemd[1]: Listening on Syslog Socket.
[   37.388290]systemd[1]: Listening on initctl Compatibility Named Pipe.
[   37.388456]systemd[1]: Listening on Journal Audit Socket.
[   37.388535]systemd[1]: Listening on Journal Socket (/dev/log).
[   37.388628]systemd[1]: Listening on Journal Socket.
[   37.388739]systemd[1]: Listening on udev Control Socket.
[   37.388823]systemd[1]: Listening on udev Kernel Socket.
[   37.389542]systemd[1]: Mounting Huge Pages File System...
[   37.390303]systemd[1]: Mounting POSIX Message Queue File System...
[   37.391603]systemd[1]: Mounting Kernel Debug File System...
[   37.392671]systemd[1]: Mounting Kernel Trace File System...
[   37.394322]systemd[1]: Starting Journal Service...
[   37.394665]systemd[1]: Finished Availability of block devices.
[   37.396134]systemd[1]: Starting Set the console keyboard layout...
[   37.397459]systemd[1]: Starting Create list of static device nodes 
for the current kernel...
[   37.398466]systemd[1]: Starting Monitoring of LVM2 mirrors, 
snapshots etc. using dmeventd or progress polling...
[   37.399724]systemd[1]: Starting Load Kernel Module configfs...
[   37.400852]systemd[1]: Starting Load Kernel Module drm...
[   37.404438]systemd[1]: Starting Load Kernel Module fuse...
[   37.405980]systemd[1]: Started Nameserver information manager.
[   37.406164]systemd[1]: Reached target Network (Pre).
[   37.406691]systemd[1]: Condition check resulted in Set Up Additional 
Binary Formats being skipped.
[   37.409963]systemd[1]: Starting Load Kernel Modules...
[   37.410997]systemd[1]: Starting Remount Root and Kernel File 
Systems...
[   37.412178]systemd[1]: Starting Coldplug All udev Devices...
[   37.413285]systemd[1]: Starting Uncomplicated firewall...
[   37.416002]systemd[1]: Mounted Huge Pages File System.
[   37.416208]systemd[1]: Mounted POSIX Message Queue File System.
[   37.416372]systemd[1]: Mounted Kernel Debug File System.
[   37.416518]systemd[1]: Mounted Kernel Trace File System.
[   37.417208]systemd[1]: Finished Create list of static device nodes 
for the current kernel.
[   37.417515]systemd[1]: modprobe@configfs.service: Succeeded.
[   37.417930]systemd[1]: Finished Load Kernel Module configfs.
[   37.419305]systemd[1]: modprobe@drm.service: Succeeded.
[   37.419769]systemd[1]: Finished Load Kernel Module drm.
[   37.420445]systemd[1]: modprobe@fuse.service: Succeeded.
[   37.420877]systemd[1]: Finished Load Kernel Module fuse.
[   37.422337]systemd[1]: Mounting FUSE Control File System...
[   37.423572]systemd[1]: Mounting Kernel Configuration File System...
[   37.427383]systemd[1]: Mounted FUSE Control File System.
[   37.427547]systemd[1]: Mounted Kernel Configuration File System.
[   37.429309]EXT4-fs (dm-1): re-mounted. Opts: errors=remount-ro
[   37.430190]ashmem_linux: module is from the staging directory, the 
quality is unknown, you have been warned.
[   37.430575]ashmem: initialized
[   37.431113]systemd[1]: Finished Remount Root and Kernel File Systems.
[   37.432832]systemd[1]: Condition check resulted in Rebuild Hardware 
Database being skipped.
[   37.432896]systemd[1]: Condition check resulted in Platform 
Persistent Storage Archival being skipped.
[   37.434023]systemd[1]: Starting Load/Save Random Seed...
[   37.435050]systemd[1]: Starting Create System Users...
[   37.435960]systemd[1]: Finished Uncomplicated firewall.
[   37.461710]systemd[1]: Finished Monitoring of LVM2 mirrors, 
snapshots etc. using dmeventd or progress polling.
[   37.464636]systemd[1]: Finished Load/Save Random Seed.
[   37.464798]systemd[1]: Condition check resulted in First Boot 
Complete being skipped.
[   37.468585]systemd[1]: Finished Create System Users.
[   37.470877]systemd[1]: Starting Create Static Device Nodes in /dev...
[   37.472031]lp: driver loaded but no devices found
[   37.480890]systemd[1]: Finished Create Static Device Nodes in /dev.
[   37.482608]systemd[1]: Starting Rule-based Manager for Device Events 
and Files...
[   37.494068]ppdev: user-space parallel port driver
[   37.501808]systemd[1]: Started Journal Service.
[   37.518346]systemd-journald[543]: Received client request to flush 
runtime journal.
[   37.876161]input: Surface Pro 3/4 Buttons as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:19/PNP0C09:00/MSHW0040:00/input/inpu
t11
[   37.881232]surface_pro3_button MSHW0040:00: Surface Pro 3/4 Buttons 
[VGBI]
[   37.947906]mc: Linux media interface: v0.10
[   37.970034]videodev: Linux video capture interface: v2.00
[   38.015669]mei_me 0000:00:16.0: enabling device (0004 -> 0006)
[   38.018953]ov5693 i2c-INT33BE:00: ov5693_probe() called
[   38.019121]ov5693 i2c-INT33BE:00: supply avdd not found, using dummy 
regulator
[   38.019155]ov5693 i2c-INT33BE:00: supply dovdd not found, using 
dummy regulator
[   38.019931]mei_me 0000:00:16.4: enabling device (0004 -> 0006)
[   38.037182]ipu3_imgu: module is from the staging directory, the 
quality is unknown, you have been warned.
[   38.055022]ov5693 i2c-INT33BE:00: sensor_revision = 0x2
[   38.055025]ov5693 i2c-INT33BE:00: sensor_address = 0x36
[   38.055027]ov5693 i2c-INT33BE:00: detect ov5693 success
[   38.056540]ipu3-cio2 0000:00:14.3: Found supported sensor INT33BE:00
[   38.056599]ipu3-cio2 0000:00:14.3: Connected 1 cameras
[   38.056613]ipu3-cio2 0000:00:14.3: enabling device (0000 -> 0002)
[   38.056785]ipu3-cio2 0000:00:14.3: device 0x9d32 (rev: 0x1)
[   38.081286]pstore: Using crash dump compression: deflate
[   38.081295]pstore: Registered efi as persistent store backend
[   38.118690]ipu3-imgu 0000:00:05.0: enabling device (0000 -> 0002)
[   38.118915]ipu3-imgu 0000:00:05.0: device 0x1919 (rev: 0x1)
[   38.118939]ipu3-imgu 0000:00:05.0: physical base address 
0x00000000a1000000, 4194304 bytes
[   38.126677]RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 
655360 ms ovfl timer
[   38.126680]RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   38.126681]RAPL PMU: hw unit of domain package 2^-14 Joules
[   38.126682]RAPL PMU: hw unit of domain dram 2^-14 Joules
[   38.126683]RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   38.126684]RAPL PMU: hw unit of domain psys 2^-14 Joules
[   38.222738]cfg80211: Loading compiled-in X.509 certificates for 
regulatory database
[   38.228287]cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   38.290475]mwifiex_pcie 0000:02:00.0: quirk reset_d3cold enabled
[   38.290478]mwifiex_pcie 0000:02:00.0: quirk no_brigde_d3 enabled
[   38.290577]mwifiex_pcie 0000:02:00.0: enabling device (0000 -> 0002)
[   38.290806]mwifiex_pcie: PCI memory map Virt0: ffffb16441900000 PCI 
memory map Virt2: ffffb16461400000
[   38.327199]ipu3-imgu 0000:00:05.0: loaded firmware version 
irci_irci_ecr-master_20161208_0213_20170112_1500, 17 binaries, 1212984 
by
tes
[   38.413587]ipts 0000:00:16.4-3e8d0870-271a-4208-8eb5-9acb9402ae04: 
Starting IPTS
[   38.423232]ipts 0000:00:16.4-3e8d0870-271a-4208-8eb5-9acb9402ae04: 
Device 1B96:0021 ready
[   38.457592]intel_rapl_common: Found RAPL domain package
[   38.457595]intel_rapl_common: Found RAPL domain core
[   38.457596]intel_rapl_common: Found RAPL domain uncore
[   38.457598]intel_rapl_common: Found RAPL domain dram
[   38.457599]intel_rapl_common: Found RAPL domain psys
[   38.560172]usb 1-1: 1:7 : unsupported format bits 0x100000000
[   38.562750]usbcore: registered new interface driver snd-usb-audio
[   38.630995]snd_hda_intel 0000:00:1f.3: DSP detected with PCI 
class/subclass/prog-if info 0x040380
[   38.631030]snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[   38.631314]snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops 
i915_audio_component_bind_ops [i915])
[   38.670990]snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC298: 
line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   38.670994]snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 
(0x0/0x0/0x0/0x0/0x0)
[   38.670996]snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 
(0x21/0x0/0x0/0x0/0x0)
[   38.670997]snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   38.670999]snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   38.671001]snd_hda_codec_realtek hdaudioC0D0:      Mic=0x18
[   38.671002]snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[   38.745448]input: Microsoft Surface Type Cover Keyboard as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inp
ut/input14
[   38.748392]input: HDA Intel PCH Mic as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[   38.802394]input: Microsoft Surface Type Cover Mouse as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/input/
input15
[   38.802640]input: Microsoft Surface Type Cover Consumer Control as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.
0002/input/input16
[   38.802688]input: HDA Intel PCH Headphone as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[   38.802726]input: Microsoft Surface Type Cover UNKNOWN as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inpu
t/input17
[   38.802757]input: HDA Intel PCH HDMI/DP,pcm=3 as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[   38.802801]input: Microsoft Surface Type Cover Touchpad as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inp
ut/input18
[   38.802813]input: HDA Intel PCH HDMI/DP,pcm=7 as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[   38.802873]input: Microsoft Surface Type Cover UNKNOWN as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inpu
t/input19
[   38.802892]input: HDA Intel PCH HDMI/DP,pcm=8 as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[   38.802941]input: Microsoft Surface Type Cover UNKNOWN as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inpu
t/input20
[   38.802955]input: HDA Intel PCH HDMI/DP,pcm=9 as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[   38.803008]input: Microsoft Surface Type Cover UNKNOWN as 
/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:045E:07E8.0002/inpu
t/input21
[   38.803011]input: HDA Intel PCH HDMI/DP,pcm=10 as 
/devices/pci0000:00/0000:00:1f.3/sound/card0/input27
[   38.803111]hid-multitouch 0003:045E:07E8.0002: 
input,hiddev0,hidraw0: USB HID v1.11 Keyboard [Microsoft Surface Type 
Cover] on usb-0
000:00:14.0-7/input0
[   38.828480]mousedev: PS/2 mouse device common for all mice
[   39.674157]mwifiex_pcie 0000:02:00.0: info: FW download over, size 
723540 bytes
[   40.418055]usb 1-5: new high-speed USB device number 4 using xhci_hcd
[   40.568691]usb 1-5: New USB device found, idVendor=1286, 
idProduct=204c, bcdDevice=32.01
[   40.568694]usb 1-5: New USB device strings: Mfr=1, Product=2, 
SerialNumber=3
[   40.568696]usb 1-5: Product: Bluetooth and Wireless LAN Composite 
Device
[   40.568698]usb 1-5: Manufacturer: Marvell
[   40.568699]usb 1-5: SerialNumber: 0000000000000000
[   40.607676]Bluetooth: Core ver 2.22
[   40.607704]NET: Registered protocol family 31
[   40.607706]Bluetooth: HCI device and connection manager initialized
[   40.607709]Bluetooth: HCI socket layer initialized
[   40.607711]Bluetooth: L2CAP socket layer initialized
[   40.607715]Bluetooth: SCO socket layer initialized
[   40.616054]usbcore: registered new interface driver btusb
[   40.619814]Bluetooth: hci0: unexpected event for opcode 0x0000
[   40.620058]Bluetooth: hci0: unexpected event for opcode 0x0000
[   40.650190]mwifiex_pcie 0000:02:00.0: WLAN FW is active
[   40.783752]mwifiex_pcie 0000:02:00.0: info: MWIFIEX VERSION: mwifiex 
1.0 (15.68.19.p21)
[   40.783755]mwifiex_pcie 0000:02:00.0: driver_version = mwifiex 1.0 
(15.68.19.p21)
[   40.788239]mwifiex_pcie 0000:02:00.0 wlp2s0: renamed from mlan0
[   41.382070]FAT-fs (nvme0n1p1): Volume was not properly unmounted. 
Some data may be corrupt. Please run fsck.
[   41.383458]FAT-fs (nvme0n1p2): Volume was not properly unmounted. 
Some data may be corrupt. Please run fsck.
[   41.427711]audit: type=1400 audit(1627383486.851:2): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="libreoffi
ce-xpdfimport" pid=927 comm="apparmor_parser"
[   41.428511]audit: type=1400 audit(1627383486.851:3): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="libreoffi
ce-oosplash" pid=926 comm="apparmor_parser"
[   41.431560]audit: type=1400 audit(1627383486.855:4): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="/usr/bin/
man" pid=928 comm="apparmor_parser"
[   41.431565]audit: type=1400 audit(1627383486.855:5): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="man_filte
r" pid=928 comm="apparmor_parser"
[   41.431568]audit: type=1400 audit(1627383486.855:6): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="man_groff
" pid=928 comm="apparmor_parser"
[   41.434679]audit: type=1400 audit(1627383486.859:7): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="libreoffi
ce-senddoc" pid=932 comm="apparmor_parser"
[   41.445102]audit: type=1400 audit(1627383486.863:8): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="/usr/lib/
cups/backend/cups-pdf" pid=929 comm="apparmor_parser"
[   41.445108]audit: type=1400 audit(1627383486.863:9): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="/usr/sbin
/cupsd" pid=929 comm="apparmor_parser"
[   41.445111]audit: type=1400 audit(1627383486.863:10): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="/usr/sbi
n/cupsd//third_party" pid=929 comm="apparmor_parser"
[   41.449939]audit: type=1400 audit(1627383486.871:11): 
apparmor="STATUS" operation="profile_load" profile="unconfined" 
name="lxc-cont
ainer-default" pid=931 comm="apparmor_parser"
[   41.646112]Adding 4193784k swap on /dev/mapper/cryptswap.  
Priority:-2 extents:1 across:4193784k SSFS
[   41.726121]input: IPTS Touch as /devices/virtual/input/input28
[   41.727105]input: IPTS Stylus as /devices/virtual/input/input29
[   41.913695]Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   41.913696]Bluetooth: BNEP filters: protocol multicast
[   41.913699]Bluetooth: BNEP socket layer initialized
[   41.945429]NET: Registered protocol family 38
[   42.196046]mwifiex_pcie 0000:02:00.0: Enabling ps_mode disallowed by 
modparam
[   44.129195]Bluetooth: RFCOMM TTY layer initialized
[   44.129202]Bluetooth: RFCOMM socket layer initialized
[   44.129207]Bluetooth: RFCOMM ver 1.11
[   45.374442]mwifiex_pcie 0000:02:00.0: Enabling ps_mode disallowed by 
modparam
[   45.404171]mwifiex_pcie 0000:02:00.0: info: trying to associate to 
'Gensokyo' bssid 28:bd:89:c2:a7:59
[   45.496473]rfkill: input handler disabled
[   45.593493]mwifiex_pcie 0000:02:00.0: info: associated to bssid 
28:bd:89:c2:a7:59 successfully
[   46.511019]i915 0000:00:02.0: [drm] Reducing the compressed 
framebuffer size. This may lead to less power savings than a non-reduced
-size. Try to increase stolen memory size if available in BIOS.
[   46.522956]IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   57.570233]rfkill: input handler enabled
[   63.947048]rfkill: input handler disabled
[   73.876396]process '/usr/bin/glava' started with executable stack


On Tue, 27 Jul, 2021 at 7:43 am, "Schmid, Carsten" 
<Carsten_Schmid@mentor.com> wrote:
> Hi Greg,
> 
> On Tue, Jul 27, 2021 at 12:37:28AM +0100, Razgriz375 (Neil) wrote:
> 
>>>  [  109.668465] usb 1-1: USB disconnect, device number 2
>>>  [  110.084429] usb 1-1: new high-speed USB device number 5 using 
>>> xhci_hcd
>>>  [  110.237963] usb 1-1: New USB device found, idVendor=054c, 
>>> idProduct=0b8c, bcdDevice= 1.00
>>>  [  110.237989] usb 1-1: New USB device strings: Mfr=2, Product=3, 
>>> SerialNumber=4
>>>  [  110.238002] usb 1-1: Product: WALKMAN
>>>  [  110.238011] usb 1-1: Manufacturer: Sony
>>>  [  110.238019] usb 1-1: SerialNumber: 10458B55477916
>>>  [  110.342104] usb 1-1: 1:7 : unsupported format bits 0x100000000
>>>  [  110.343953] usbcore: registered new interface driver 
>>> snd-usb-audio
>>> 
>> 
>> 
>>  Looks like you removed the device and then added it back?  And it 
>> says
>>  the device is supported by the kernel now, what does not work 
>> properly?
> 
> But earlier in boot these messages are seen:
> [    1.908489] usb 1-1: New USB device found, idVendor=054c, 
> idProduct=0ca1, bcdDevice= 1.00
> [    1.908503] usb 1-1: New USB device strings: Mfr=2, Product=3, 
> SerialNumber=4
> [    1.908508] usb 1-1: Product: WALKMAN
> [    1.908513] usb 1-1: Manufacturer: Sony
> [    1.908516] usb 1-1: SerialNumber: 10458B55477916
> [    2.195821] usb-storage 1-1:1.0: USB Mass Storage device detected
> [    2.195988] scsi host0: usb-storage 1-1:1.0
> 
> ProductId is different, that's strange.
> 
> Neil, could you collect the dmesg from the working kernel 5.10 please?
> And: is the device expected to be a mass storage (aka USB disk) and 
> sound card in one?
> 
> Thanks,
> Carsten
> 
> 
> -----------------
> Siemens Electronic Design Automation GmbH; Anschrift: Arnulfstraße 
> 201, 80634 München; Gesellschaft mit beschränkter Haftung; 
> Geschäftsführer: Thomas Heurung, Frank Thürauf; Sitz der 
> Gesellschaft: München; Registergericht München, HRB 106955



^ permalink raw reply	[flat|nested] 9+ messages in thread

* RE: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
  2021-07-27 11:02       ` AMoonRabbit
@ 2021-07-27 13:02         ` Schmid, Carsten
       [not found]           ` <GBNWWQ.KWQ1PXLOHKYW2@gmail.com>
  2021-08-10 17:00           ` AMoonRabbit
  0 siblings, 2 replies; 9+ messages in thread
From: Schmid, Carsten @ 2021-07-27 13:02 UTC (permalink / raw)
  To: AMoonRabbit; +Cc: Greg KH, linux-usb

Hi Neil,

> -----Original Message-----
> From: AMoonRabbit <razgriz.wilson6@gmail.com>

No top posts please.

On Tue, 27 Jul, 2021 at 7:43 am, "Schmid, Carsten"
<Carsten_Schmid@mentor.com> wrote:
> Hi Greg,
>
> On Tue, Jul 27, 2021 at 12:37:28AM +0100, Razgriz375 (Neil) wrote:
>
>>>  [  109.668465] usb 1-1: USB disconnect, device number 2
>>>  [  110.084429] usb 1-1: new high-speed USB device number 5 using
>>> xhci_hcd
>>>  [  110.237963] usb 1-1: New USB device found, idVendor=054c,
>>> idProduct=0b8c, bcdDevice= 1.00
>>>  [  110.237989] usb 1-1: New USB device strings: Mfr=2, Product=3,
>>> SerialNumber=4
>>>  [  110.238002] usb 1-1: Product: WALKMAN
>>>  [  110.238011] usb 1-1: Manufacturer: Sony
>>>  [  110.238019] usb 1-1: SerialNumber: 10458B55477916
>>>  [  110.342104] usb 1-1: 1:7 : unsupported format bits 0x100000000
>>>  [  110.343953] usbcore: registered new interface driver
>>> snd-usb-audio
>>>
>>
>>
>>  Looks like you removed the device and then added it back?  And it
>> says
>>  the device is supported by the kernel now, what does not work
>> properly?
>
> But earlier in boot these messages are seen:
> [    1.908489] usb 1-1: New USB device found, idVendor=054c,
> idProduct=0ca1, bcdDevice= 1.00
> [    1.908503] usb 1-1: New USB device strings: Mfr=2, Product=3,
> SerialNumber=4
> [    1.908508] usb 1-1: Product: WALKMAN
> [    1.908513] usb 1-1: Manufacturer: Sony
> [    1.908516] usb 1-1: SerialNumber: 10458B55477916
> [    2.195821] usb-storage 1-1:1.0: USB Mass Storage device detected
> [    2.195988] scsi host0: usb-storage 1-1:1.0
>
> ProductId is different, that's strange.
>
> Neil, could you collect the dmesg from the working kernel 5.10 please?
> And: is the device expected to be a mass storage (aka USB disk) and
> sound card in one?
>

> So this is the Dmesg output from 5.10.17 with working output to USB DAC
> (Walkman visually gets audio as the amp meter visualiser works where as
> on newer kernels, whilst the system looks to be outputting sound, the
> Walkman shows it's receiving nothing).
...
> [   12.202312]usb 1-1: new high-speed USB device number 3 using xhci_hcd
> [   12.351838]usb 1-1: New USB device found, idVendor=054c,
> idProduct=0b8c, bcdDevice= 1.00
> [   12.351844]usb 1-1: New USB device strings: Mfr=2, Product=3,
> SerialNumber=4
> [   12.351847]usb 1-1: Product: WALKMAN
> [   12.351850]usb 1-1: Manufacturer: Sony
> [   12.351852]usb 1-1: SerialNumber: 10458B55477916
> [   38.560172]usb 1-1: 1:7 : unsupported format bits 0x100000000
> [   38.562750]usbcore: registered new interface driver snd-usb-audio
> [   38.630995]snd_hda_intel 0000:00:1f.3: DSP detected with PCI
> class/subclass/prog-if info 0x040380

Looks like on the old kernel the Walkman is seen as the first sound card.
On the new kernel, it was seen as a mass storage first and later switched to snd-usb.
Please check if your Walkman appears as a sound card in the new kernel
and if it is muted due to not being the default output.

Thanks,
Carsten
-----------------
Siemens Electronic Design Automation GmbH; Anschrift: Arnulfstraße 201, 80634 München; Gesellschaft mit beschränkter Haftung; Geschäftsführer: Thomas Heurung, Frank Thürauf; Sitz der Gesellschaft: München; Registergericht München, HRB 106955

^ permalink raw reply	[flat|nested] 9+ messages in thread

* RE: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
       [not found]           ` <GBNWWQ.KWQ1PXLOHKYW2@gmail.com>
@ 2021-07-27 15:05             ` Schmid, Carsten
  2021-07-27 16:11               ` AMoonRabbit
  0 siblings, 1 reply; 9+ messages in thread
From: Schmid, Carsten @ 2021-07-27 15:05 UTC (permalink / raw)
  To: AMoonRabbit; +Cc: Greg KH, linux-usb

Hi,

> Dmesg output with the system rebooted and the Walkman kept in DAC mode
> so the system will only have seen the device in that mode. And sorry,
> not sure what you mean by no top posts, but guessing it has something
> to do with leaving the original email I used in the CC?

No top posting means:
Write your answers _below_ the text that you answer to, not on top of it.

When you read books, you read from top to bottom, isn't it?

Thanks,
Carsten
-----------------
Siemens Electronic Design Automation GmbH; Anschrift: Arnulfstraße 201, 80634 München; Gesellschaft mit beschränkter Haftung; Geschäftsführer: Thomas Heurung, Frank Thürauf; Sitz der Gesellschaft: München; Registergericht München, HRB 106955

^ permalink raw reply	[flat|nested] 9+ messages in thread

* RE: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
  2021-07-27 15:05             ` Schmid, Carsten
@ 2021-07-27 16:11               ` AMoonRabbit
  2021-07-27 17:06                 ` Felipe Balbi
  0 siblings, 1 reply; 9+ messages in thread
From: AMoonRabbit @ 2021-07-27 16:11 UTC (permalink / raw)
  To: Schmid, Carsten; +Cc: Greg KH, linux-usb



On Tue, 27 Jul, 2021 at 3:05 pm, "Schmid, Carsten" 
<Carsten_Schmid@mentor.com> wrote:
> Hi,
> 
>>  Dmesg output with the system rebooted and the Walkman kept in DAC 
>> mode
>>  so the system will only have seen the device in that mode. And 
>> sorry,
>>  not sure what you mean by no top posts, but guessing it has 
>> something
>>  to do with leaving the original email I used in the CC?
> 
> No top posting means:
> Write your answers _below_ the text that you answer to, not on top of 
> it.
> 
> When you read books, you read from top to bottom, isn't it?
> 
> Thanks,
> Carsten
> -----------------
> Siemens Electronic Design Automation GmbH; Anschrift: Arnulfstraße 
> 201, 80634 München; Gesellschaft mit beschränkter Haftung; 
> Geschäftsführer: Thomas Heurung, Frank Thürauf; Sitz der 
> Gesellschaft: München; Registergericht München, HRB 106955

Apologies, but that's not a concept I've heard of until now for emails. 
Will put responses below the chain from now on.








^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
  2021-07-27 16:11               ` AMoonRabbit
@ 2021-07-27 17:06                 ` Felipe Balbi
  0 siblings, 0 replies; 9+ messages in thread
From: Felipe Balbi @ 2021-07-27 17:06 UTC (permalink / raw)
  To: AMoonRabbit; +Cc: Schmid, Carsten, Greg KH, linux-usb


Hi,

AMoonRabbit <razgriz.wilson6@gmail.com> writes:
> On Tue, 27 Jul, 2021 at 3:05 pm, "Schmid, Carsten"
> <Carsten_Schmid@mentor.com> wrote:
>> Hi,
>> 
>>>  Dmesg output with the system rebooted and the Walkman kept in DAC
>>> mode
>>>  so the system will only have seen the device in that mode. And
>>> sorry,
>>>  not sure what you mean by no top posts, but guessing it has
>>> something
>>>  to do with leaving the original email I used in the CC?
>> No top posting means:
>> Write your answers _below_ the text that you answer to, not on top
>> of it.
>> When you read books, you read from top to bottom, isn't it?
>> Thanks,
>> Carsten
>> -----------------
>> Siemens Electronic Design Automation GmbH; Anschrift: Arnulfstraße
>> 201, 80634 München; Gesellschaft mit beschränkter Haftung; 
>> Geschäftsführer: Thomas Heurung, Frank Thürauf; Sitz der
>> Gesellschaft: München; Registergericht München, HRB 106955
>
> Apologies, but that's not a concept I've heard of until now for

that's okay, we're here to help ;-)

> emails. Will put responses below the chain from now on.

Not necessarily entirely below. We reply below each "topic", as I've
done here. Hope this helps

-- 
balbi

^ permalink raw reply	[flat|nested] 9+ messages in thread

* RE: Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues
  2021-07-27 13:02         ` Schmid, Carsten
       [not found]           ` <GBNWWQ.KWQ1PXLOHKYW2@gmail.com>
@ 2021-08-10 17:00           ` AMoonRabbit
  1 sibling, 0 replies; 9+ messages in thread
From: AMoonRabbit @ 2021-08-10 17:00 UTC (permalink / raw)
  To: Schmid, Carsten; +Cc: Greg KH, linux-usb



On Tue, 27 Jul, 2021 at 1:02 pm, "Schmid, Carsten" 
<Carsten_Schmid@mentor.com> wrote:
> Hi Neil,
> 
>>  -----Original Message-----
>>  From: AMoonRabbit <razgriz.wilson6@gmail.com>
> 
> No top posts please.
> 
> On Tue, 27 Jul, 2021 at 7:43 am, "Schmid, Carsten"
> <Carsten_Schmid@mentor.com> wrote:
>>  Hi Greg,
>> 
>>  On Tue, Jul 27, 2021 at 12:37:28AM +0100, Razgriz375 (Neil) wrote:
>> 
>>>>   [  109.668465] usb 1-1: USB disconnect, device number 2
>>>>   [  110.084429] usb 1-1: new high-speed USB device number 5 using
>>>>  xhci_hcd
>>>>   [  110.237963] usb 1-1: New USB device found, idVendor=054c,
>>>>  idProduct=0b8c, bcdDevice= 1.00
>>>>   [  110.237989] usb 1-1: New USB device strings: Mfr=2, Product=3,
>>>>  SerialNumber=4
>>>>   [  110.238002] usb 1-1: Product: WALKMAN
>>>>   [  110.238011] usb 1-1: Manufacturer: Sony
>>>>   [  110.238019] usb 1-1: SerialNumber: 10458B55477916
>>>>   [  110.342104] usb 1-1: 1:7 : unsupported format bits 0x100000000
>>>>   [  110.343953] usbcore: registered new interface driver
>>>>  snd-usb-audio
>>>> 
>>> 
>>> 
>>>   Looks like you removed the device and then added it back?  And it
>>>  says
>>>   the device is supported by the kernel now, what does not work
>>>  properly?
>> 
>>  But earlier in boot these messages are seen:
>>  [    1.908489] usb 1-1: New USB device found, idVendor=054c,
>>  idProduct=0ca1, bcdDevice= 1.00
>>  [    1.908503] usb 1-1: New USB device strings: Mfr=2, Product=3,
>>  SerialNumber=4
>>  [    1.908508] usb 1-1: Product: WALKMAN
>>  [    1.908513] usb 1-1: Manufacturer: Sony
>>  [    1.908516] usb 1-1: SerialNumber: 10458B55477916
>>  [    2.195821] usb-storage 1-1:1.0: USB Mass Storage device detected
>>  [    2.195988] scsi host0: usb-storage 1-1:1.0
>> 
>>  ProductId is different, that's strange.
>> 
>>  Neil, could you collect the dmesg from the working kernel 5.10 
>> please?
>>  And: is the device expected to be a mass storage (aka USB disk) and
>>  sound card in one?
>> 

Responded to this already in the email on the 27th July.

>> 
>>  So this is the Dmesg output from 5.10.17 with working output to USB 
>> DAC
>>  (Walkman visually gets audio as the amp meter visualiser works 
>> where as
>>  on newer kernels, whilst the system looks to be outputting sound, 
>> the
>>  Walkman shows it's receiving nothing).
> ...
>>  [   12.202312]usb 1-1: new high-speed USB device number 3 using 
>> xhci_hcd
>>  [   12.351838]usb 1-1: New USB device found, idVendor=054c,
>>  idProduct=0b8c, bcdDevice= 1.00
>>  [   12.351844]usb 1-1: New USB device strings: Mfr=2, Product=3,
>>  SerialNumber=4
>>  [   12.351847]usb 1-1: Product: WALKMAN
>>  [   12.351850]usb 1-1: Manufacturer: Sony
>>  [   12.351852]usb 1-1: SerialNumber: 10458B55477916
>>  [   38.560172]usb 1-1: 1:7 : unsupported format bits 0x100000000
>>  [   38.562750]usbcore: registered new interface driver snd-usb-audio
>>  [   38.630995]snd_hda_intel 0000:00:1f.3: DSP detected with PCI
>>  class/subclass/prog-if info 0x040380
> 
> Looks like on the old kernel the Walkman is seen as the first sound 
> card.
> On the new kernel, it was seen as a mass storage first and later 
> switched to snd-usb.
> Please check if your Walkman appears as a sound card in the new kernel
> and if it is muted due to not being the default output.

So I have checked this, starting with the Walkman connected in DAC 
mode, so it is only seen in DAC mode. Pop OS updates the sound settings 
so that the Walkman is the selected output device. It does not show as 
muted. Within ALSA Mixer, I see that HDA Intel PCM is first, and then 
the WALKMAN device, however when selecting WALKMAN I get "This sound 
device does not have any controls".

> 
> Thanks,
> Carsten
> -----------------
> Siemens Electronic Design Automation GmbH; Anschrift: Arnulfstraße 
> 201, 80634 München; Gesellschaft mit beschränkter Haftung; 
> Geschäftsführer: Thomas Heurung, Frank Thürauf; Sitz der 
> Gesellschaft: München; Registergericht München, HRB 106955
> 

Kind regards,

Neil










^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2021-08-10 17:00 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <QUKVWQ.1T8HV94AM5X6@gmail.com>
2021-07-26 23:37 ` Fwd: Linux Kernel 5.12.10 Walkman USB DAC support issues Razgriz375 (Neil)
2021-07-27  6:16   ` Greg KH
2021-07-27  7:43     ` Schmid, Carsten
2021-07-27 11:02       ` AMoonRabbit
2021-07-27 13:02         ` Schmid, Carsten
     [not found]           ` <GBNWWQ.KWQ1PXLOHKYW2@gmail.com>
2021-07-27 15:05             ` Schmid, Carsten
2021-07-27 16:11               ` AMoonRabbit
2021-07-27 17:06                 ` Felipe Balbi
2021-08-10 17:00           ` AMoonRabbit

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).