From: Bjoern <lkml@call-home.ch>
To: linux-usb@vger.kernel.org
Subject: USB disconnect due to error from flowcontrol urb
Date: Thu, 15 Aug 2019 10:41:05 +0200 [thread overview]
Message-ID: <b2eb7947-7b13-ab50-1f89-79268a2da063@call-home.ch> (raw)
Hi,
I'm running on Ubuntu Bionic 4.14.94-155 on an odroid-x4 (armhf).
I have a FT230X Basic UART (0403:6015) plugged into the exynos-ohci USB.
The device is linked via a udev rule to a "symbolic/virtual" device so
that the software FHEM can address it independent of the real ttyUSB* name.
I constantly see disconnects for the device in the kernel log, see log
excerpts below. I've found similar issues online going back till 2012
but there seems to be no solution so far. I'd like to help find the
cause if possible.
Regards,
Bjoern
Aug 4 11:25:11 fhem2 kernel: [2476586.963898] usb 2-1: USB disconnect,
device number 66
Aug 4 11:25:11 fhem2 kernel: [2476586.965833] ftdi_sio ttyUSB0: error
from flowcontrol urb
Aug 4 11:25:11 fhem2 kernel: [2476586.976811] ftdi_sio ttyUSB0: FTDI
USB Serial Device converter now disconnected from ttyUSB0
Aug 4 11:25:11 fhem2 kernel: [2476586.977232] ftdi_sio 2-1:1.0: device
disconnected
Aug 4 11:25:12 fhem2 kernel: [2476587.453089] usb 2-1: new full-speed
USB device number 67 using exynos-ohci
Aug 4 11:25:12 fhem2 kernel: [2476587.690677] usb 2-1: New USB device
found, idVendor=0403, idProduct=6015
Aug 4 11:25:12 fhem2 kernel: [2476587.690701] usb 2-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Aug 4 11:25:12 fhem2 kernel: [2476587.690718] usb 2-1: Product: FT230X
Basic UART
Aug 4 11:25:12 fhem2 kernel: [2476587.690733] usb 2-1: Manufacturer: FTDI
Aug 4 11:25:12 fhem2 kernel: [2476587.690748] usb 2-1: SerialNumber:
DN03L5HK
Aug 4 11:25:12 fhem2 kernel: [2476587.697068] ftdi_sio 2-1:1.0: FTDI
USB Serial Device converter detected
Aug 4 11:25:12 fhem2 kernel: [2476587.697388] usb 2-1: Detected FT-X
Aug 4 11:25:12 fhem2 kernel: [2476587.701288] usb 2-1: FTDI USB Serial
Device converter now attached to ttyUSB0
Aug 4 19:43:11 fhem2 kernel: [2506466.787738] usb usb2-port1: disabled
by hub (EMI?), re-enabling...
Aug 4 19:43:11 fhem2 kernel: [2506466.792968] usb 2-1: USB disconnect,
device number 67
Aug 4 19:43:11 fhem2 kernel: [2506466.794825] ftdi_sio ttyUSB0: error
from flowcontrol urb
Aug 4 19:43:11 fhem2 kernel: [2506466.803026] ftdi_sio ttyUSB0: FTDI
USB Serial Device converter now disconnected from ttyUSB0
Aug 4 19:43:11 fhem2 kernel: [2506466.803630] ftdi_sio 2-1:1.0: device
disconnected
Aug 4 19:43:11 fhem2 kernel: [2506467.139384] usb 2-1: new full-speed
USB device number 68 using exynos-ohci
Aug 4 19:43:12 fhem2 kernel: [2506467.377550] usb 2-1: New USB device
found, idVendor=0403, idProduct=6015
Aug 4 19:43:12 fhem2 kernel: [2506467.377574] usb 2-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Aug 4 19:43:12 fhem2 kernel: [2506467.377590] usb 2-1: Product: FT230X
Basic UART
Aug 4 19:43:12 fhem2 kernel: [2506467.377606] usb 2-1: Manufacturer: FTDI
Aug 4 19:43:12 fhem2 kernel: [2506467.377620] usb 2-1: SerialNumber:
DN03L5HK
Aug 4 19:43:12 fhem2 kernel: [2506467.383884] ftdi_sio 2-1:1.0: FTDI
USB Serial Device converter detected
Aug 4 19:43:12 fhem2 kernel: [2506467.384291] usb 2-1: Detected FT-X
Aug 4 19:43:12 fhem2 kernel: [2506467.388093] usb 2-1: FTDI USB Serial
Device converter now attached to ttyUSB0
Aug 6 07:46:23 fhem2 kernel: [2636259.004563] usb 2-1: USB disconnect,
device number 68
Aug 6 07:46:23 fhem2 kernel: [2636259.005393] ftdi_sio ttyUSB0: error
from flowcontrol urb
Aug 6 07:46:23 fhem2 kernel: [2636259.011179] ftdi_sio ttyUSB0: FTDI
USB Serial Device converter now disconnected from ttyUSB0
Aug 6 07:46:23 fhem2 kernel: [2636259.011347] ftdi_sio 2-1:1.0: device
disconnected
Aug 6 07:46:24 fhem2 kernel: [2636259.491782] usb 2-1: new full-speed
USB device number 69 using exynos-ohci
Aug 6 07:46:24 fhem2 kernel: [2636259.730054] usb 2-1: New USB device
found, idVendor=0403, idProduct=6015
Aug 6 07:46:24 fhem2 kernel: [2636259.730079] usb 2-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Aug 6 07:46:24 fhem2 kernel: [2636259.730095] usb 2-1: Product: FT230X
Basic UART
Aug 6 07:46:24 fhem2 kernel: [2636259.730110] usb 2-1: Manufacturer: FTDI
Aug 6 07:46:24 fhem2 kernel: [2636259.730125] usb 2-1: SerialNumber:
DN03L5HK
Aug 6 07:46:24 fhem2 kernel: [2636259.736360] ftdi_sio 2-1:1.0: FTDI
USB Serial Device converter detected
Aug 6 07:46:24 fhem2 kernel: [2636259.736715] usb 2-1: Detected FT-X
Aug 6 07:46:24 fhem2 kernel: [2636259.740832] usb 2-1: FTDI USB Serial
Device converter now attached to ttyUSB2
Aug 6 12:08:56 fhem2 kernel: [2652012.201328] usb 2-1: USB disconnect,
device number 69
Aug 6 12:08:56 fhem2 kernel: [2652012.202561] ftdi_sio ttyUSB2: error
from flowcontrol urb
Aug 6 12:08:56 fhem2 kernel: [2652012.209322] ftdi_sio ttyUSB2: FTDI
USB Serial Device converter now disconnected from ttyUSB2
Aug 6 12:08:56 fhem2 kernel: [2652012.209579] ftdi_sio 2-1:1.0: device
disconnected
Aug 6 12:08:57 fhem2 kernel: [2652012.684908] usb 2-1: new full-speed
USB device number 70 using exynos-ohci
Aug 6 12:08:57 fhem2 kernel: [2652012.922996] usb 2-1: New USB device
found, idVendor=0403, idProduct=6015
Aug 6 12:08:57 fhem2 kernel: [2652012.923021] usb 2-1: New USB device
strings: Mfr=1, Product=2, SerialNumber=3
Aug 6 12:08:57 fhem2 kernel: [2652012.923037] usb 2-1: Product: FT230X
Basic UART
Aug 6 12:08:57 fhem2 kernel: [2652012.923053] usb 2-1: Manufacturer: FTDI
Aug 6 12:08:57 fhem2 kernel: [2652012.923067] usb 2-1: SerialNumber:
DN03L5HK
Aug 6 12:08:57 fhem2 kernel: [2652012.929686] ftdi_sio 2-1:1.0: FTDI
USB Serial Device converter detected
Aug 6 12:08:57 fhem2 kernel: [2652012.930094] usb 2-1: Detected FT-X
Aug 6 12:08:57 fhem2 kernel: [2652012.933614] usb 2-1: FTDI USB Serial
Device converter now attached to ttyUSB0
next reply other threads:[~2019-08-15 8:41 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-15 8:41 Bjoern [this message]
2019-08-15 9:12 ` USB disconnect due to error from flowcontrol urb Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=b2eb7947-7b13-ab50-1f89-79268a2da063@call-home.ch \
--to=lkml@call-home.ch \
--cc=linux-usb@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).