Linux-USB Archive on
 help / color / Atom feed
From: Tejas Joglekar <>
To: Felipe Balbi <>,
	Greg Kroah-Hartman <>,
	Tejas Joglekar <>,,
	Mathias Nyman <>
Cc: John Youn <>
Subject: [PATCH v5 0/3] Add logic to consolidate TRBs for Synopsys xHC
Date: Fri, 16 Oct 2020 18:34:29 +0530
Message-ID: <> (raw)

The Synopsys xHC has an internal TRB cache of size TRB_CACHE_SIZE for
each endpoint. The default value for TRB_CACHE_SIZE is 16 for SS and 8
for HS. The controller loads and updates the TRB cache from the
transfer ring in system memory whenever the driver issues a start
transfer or update transfer command.

For chained TRBs, the Synopsys xHC requires that the total amount of
bytes for all TRBs loaded in the TRB cache be greater than or equal to
1 MPS. Or the chain ends within the TRB cache (with a last TRB).

If this requirement is not met, the controller will not be able to
send or receive a packet and it will hang causing a driver timeout and

This patch set adds logic to the XHCI driver to detect and prevent this
from happening along with the quirk to enable this logic for Synopsys
HAPS platform.

Based on Mathias's feedback on previous implementation where consolidation
was done in TRB cache, with this patch series the implementation is done
during mapping of the URB by consolidating the SG list into a temporary
buffer if the SG list buffer sizes within TRB_CACHE_SIZE is less than MPS.

Changes since v4:
 - Updated [Patch 3/3] platform data structure initialization
 - Trivial changes in commit wordings

Changes since v3:
 - Removed the dt-binding patch
 - Added new patch to pass the quirk as platform data
 - Modified the patch to set the quirk

Changes since v2:
 - Modified the xhci_unmap_temp_buffer function to unmap dma and c
   the dma flag
 - Removed RFC tag

Changes since v1:
 - Comments from Greg are addressed on [PATCH 4/4] and [PATCH 1/4]
 - Renamed the property and quirk as in other patches based on [PATCH 1/4]

Tejas Joglekar (3):
  usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK
  usb: xhci: Use temporary buffer to consolidate SG
  usb: dwc3: Pass quirk as platform data

 drivers/usb/dwc3/host.c      |  10 +++
 drivers/usb/host/xhci-plat.c |   3 +
 drivers/usb/host/xhci-ring.c |   2 +-
 drivers/usb/host/xhci.c      | 137 ++++++++++++++++++++++++++++++++++-
 drivers/usb/host/xhci.h      |   5 ++
 5 files changed, 155 insertions(+), 2 deletions(-)


             reply index

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-16 13:04 Tejas Joglekar [this message]
2020-10-16 13:04 ` [PATCH v5 1/3] usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK Tejas Joglekar
2020-10-16 13:05 ` [PATCH v5 2/3] usb: xhci: Use temporary buffer to consolidate SG Tejas Joglekar
2020-10-16 13:05 ` [PATCH v5 3/3] usb: dwc3: Pass quirk as platform data Tejas Joglekar
2020-10-27 18:28 ` [PATCH v5 0/3] Add logic to consolidate TRBs for Synopsys xHC Tejas Joglekar
     [not found]   ` <>
2020-10-28 15:20     ` Tejas Joglekar
2020-11-06 16:06       ` Tejas Joglekar
2020-11-12  2:31         ` Tejas Joglekar
2020-11-17 17:16           ` Tejas Joglekar
2020-11-18 14:09             ` Mathias Nyman
2020-11-19  1:19               ` Tejas Joglekar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-USB Archive on

Archives are clonable:
	git clone --mirror linux-usb/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-usb linux-usb/ \
	public-inbox-index linux-usb

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone