linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tejas Joglekar <Tejas.Joglekar@synopsys.com>
To: Rob Herring <robh@kernel.org>,
	Tejas Joglekar <Tejas.Joglekar@synopsys.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	"linux-usb@vger.kernel.org" <linux-usb@vger.kernel.org>,
	"devicetree@vger.kernel.org" <devicetree@vger.kernel.org>,
	John Youn <John.Youn@synopsys.com>
Subject: Re: [RFC PATCH v2 1/4] dt-bindings: usb: Add documentation for SG trb cache size quirk
Date: Thu, 7 May 2020 16:07:09 +0000	[thread overview]
Message-ID: <d0dabbe4-7a0a-d6a9-6592-1303ff1e8ceb@synopsys.com> (raw)
In-Reply-To: <20200506201622.GA23227@bogus>

Hi,
On 5/7/2020 1:46 AM, Rob Herring wrote:
> On Tue, Apr 21, 2020 at 03:18:09PM +0530, Tejas Joglekar wrote:
>> This commit adds the documentation for sgl-trb-cache-size-quirk, and
>> snps,sgl-trb-cache-size-quirk property. These when set enables the
>> quirk for XHCI driver for consolidation of sg list into a temporary
>> buffer when small buffer sizes are scattered over the sg list not
>> making up to MPS or total transfer size within TRB cache size with
>> Synopsys xHC.
>>
>> Signed-off-by: Tejas Joglekar <joglekar@synopsys.com>
> 
> The author and S-o-b emails don't match.
> 
I intend to use short email, but the server mangles the full email even if we
set it manually to short email. I have been using the same in the past to send
the patches to community. Do you want me to change the sign-off to sender email address? 

>> ---
>>  Changes in v2:
>>  - Renamed the property
>>
>>  Documentation/devicetree/bindings/usb/dwc3.txt     | 4 ++++
>>  Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++
>>  2 files changed, 7 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
>> index 9946ff9ba735..6d0418ee4dbd 100644
>> --- a/Documentation/devicetree/bindings/usb/dwc3.txt
>> +++ b/Documentation/devicetree/bindings/usb/dwc3.txt
>> @@ -104,6 +104,10 @@ Optional properties:
>>  			this and tx-thr-num-pkt-prd to a valid, non-zero value
>>  			1-16 (DWC_usb31 programming guide section 1.2.3) to
>>  			enable periodic ESS TX threshold.
>> + - snps,sgl-trb-cache-size-quirk: enable sg list consolidation - host mode
>> +			only. Set to use SG buffers of at least MPS size
>> +			by consolidating smaller SG buffers list into a
>> +			single buffer.
>>  
>>   - <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
>>   - snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0
>> diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
>> index 3f378951d624..14d900474894 100644
>> --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
>> +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
>> @@ -43,6 +43,9 @@ Optional properties:
>>    - quirk-broken-port-ped: set if the controller has broken port disable mechanism
>>    - imod-interval-ns: default interrupt moderation interval is 5000ns
>>    - phys : see usb-hcd.yaml in the current directory
>> +  - sgl-trb-cache-size-quirk: set if you need to consolidate sg list into a
>> +    temporary buffer when small SG buffer sizes does not make upto MPS
>> +    size or total transfer size across the TRB cache size.
>>  
>>  additionally the properties from usb-hcd.yaml (in the current directory) are
>>  supported.
>> -- 
>> 2.11.0
>>
Thanks & Regards,
  Tejas Joglekar

  reply	other threads:[~2020-05-07 16:07 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-04-21  9:47 [RFC PATCH v2 0/4] Add logic to consolidate TRBs for Synopsys xHC Tejas Joglekar
2020-04-21  9:48 ` [RFC PATCH v2 1/4] dt-bindings: usb: Add documentation for SG trb cache size quirk Tejas Joglekar
2020-05-06 20:15   ` Rob Herring
2020-05-07 16:03     ` Tejas Joglekar
2020-05-06 20:16   ` Rob Herring
2020-05-07 16:07     ` Tejas Joglekar [this message]
2020-04-21  9:48 ` [RFC PATCH v2 2/4] usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK Tejas Joglekar
2020-04-21  9:48 ` [RFC PATCH v2 3/4] usb: dwc3: Add device property sgl-trb-cache-size-quirk Tejas Joglekar
2020-04-21  9:49 ` [RFC PATCH v2 4/4] usb: xhci: Use temporary buffer to consolidate SG Tejas Joglekar
2020-05-18  8:38   ` Tejas Joglekar
2020-05-18 16:21   ` Mathias Nyman
2020-05-20  6:41     ` Tejas Joglekar
2020-05-20 16:50       ` Alan Stern
2020-05-20 17:00         ` Tejas Joglekar
2020-05-20 17:44           ` Alan Stern
2020-05-22  1:58             ` Tejas Joglekar
2020-05-22 14:21               ` Alan Stern
2020-05-22 17:22                 ` Tejas Joglekar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=d0dabbe4-7a0a-d6a9-6592-1303ff1e8ceb@synopsys.com \
    --to=tejas.joglekar@synopsys.com \
    --cc=John.Youn@synopsys.com \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).