From: Julian Sikorski <belegdol@gmail.com>
To: Nathan Stratton Treadway <vgerlists@nathanst.com>
Cc: Oliver Neukum <oneukum@suse.com>, linux-usb@vger.kernel.org
Subject: Re: Lacie Rugged USB3-FW does not work with UAS
Date: Wed, 4 Sep 2019 19:10:21 +0200 [thread overview]
Message-ID: <d11b22f3-3f09-2e3f-dc64-956193f2c5d3@gmail.com> (raw)
In-Reply-To: <20190904155831.GE4337@nathanst.com>
W dniu 04.09.2019 o 17:58, Nathan Stratton Treadway pisze:
> On Mon, Sep 02, 2019 at 22:10:01 +0200, Julian Sikorski wrote:
>> thanks for the patch! It appears that we got the drives confused, the
>> one needing quirks is 059f:1061. Unfortunately, even after hand-editing
>> the patch to match (attached for confirmation), uas is still not
>> working. The dmesg log is unchanged:
>>
>> [ 67.925435] usb 2-4: new SuperSpeed Gen 1 USB device number 2 using
>> xhci_hcd
>> [ 67.947738] usb 2-4: New USB device found, idVendor=059f,
>> idProduct=1061, bcdDevice= 0.01
>> [ 67.947739] usb 2-4: New USB device strings: Mfr=2, Product=3,
>> SerialNumber=1
>> [ 67.947740] usb 2-4: Product: Rugged USB3-FW
>> [ 67.947741] usb 2-4: Manufacturer: LaCie
>> [ 67.947742] usb 2-4: SerialNumber: 00000000157f928920fa
>> [ 67.978140] usbcore: registered new interface driver usb-storage
>> [ 68.007356] scsi host12: uas
>> [ 68.007520] usbcore: registered new interface driver uas
>> [ 68.007781] scsi 12:0:0:0: Direct-Access LaCie Rugged FW USB3
>> 051E PQ: 0 ANSI: 6
> [...]
>> [ 280.017821] usb 2-4: USB disconnect, device number 2
>> [ 280.017869] scsi host12: uas_eh_device_reset_handler FAILED err -22
>> [ 280.017876] sd 12:0:0:0: Device offlined - not ready after error recovery
>> [ 280.043423] sd 12:0:0:0: [sdb] Optimal transfer size 33553920 bytes
>> [ 280.204419] sd 12:0:0:0: [sdb] Read Capacity(16) failed: Result:
>> hostbyte=DID_ERROR driverbyte=DRIVER_OK
>> [ 280.204422] sd 12:0:0:0: [sdb] Sense not available.
>> [ 280.324417] sd 12:0:0:0: [sdb] Read Capacity(10) failed: Result:
>> hostbyte=DID_ERROR driverbyte=DRIVER_OK
>> [ 280.324420] sd 12:0:0:0: [sdb] Sense not available.
>
>
> Oliver, does the presence of the "Read Capacity(16)" message here
> indicate that either the quirk was not applied to the device or that
> the patch didn't have the expected effect?
>
> (Is there any way to check what quirks flags are actually in effect for
> a device attached to the UAS driver? For the usb-storage driver there's
> both a "Quirks match for vid..." dmesg line and the Quirks: line in the
> /proc/scsi/usb-storage/* file -- but neither of those seem to exist for
> the UAS driver....)
>
> Nathan
>
Moreover, does this matter that the two Read Capacity errors only appear
after the device is disconnected?
Best regards,
Julian
next prev parent reply other threads:[~2019-09-04 17:10 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-08-23 13:31 Lacie Rugged USB3-FW does not work with UAS Julian Sikorski
2019-08-23 13:39 ` Oliver Neukum
2019-08-23 13:43 ` Julian Sikorski
2019-08-23 14:21 ` Julian Sikorski
2019-08-23 21:23 ` Oliver Neukum
2019-08-24 7:08 ` Julian Sikorski
2019-08-29 18:33 ` Julian Sikorski
2019-09-02 11:42 ` Oliver Neukum
2019-09-02 20:10 ` Julian Sikorski
2019-09-04 15:58 ` Nathan Stratton Treadway
2019-09-04 17:10 ` Julian Sikorski [this message]
2019-09-09 12:45 ` Oliver Neukum
2019-09-09 16:18 ` Julian Sikorski
2021-07-17 8:28 ` Julian Sikorski
2021-07-19 12:47 ` Oliver Neukum
2021-07-19 16:10 ` Julian Sikorski
2021-07-20 7:43 ` Greg KH
2021-07-20 9:35 ` Oliver Neukum
2021-07-27 21:19 ` Hans de Goede
[not found] ` <CA+xVL_QEgzb1tu-tzqYPxJF-G_a8czCp=uyZ1JJ9+5xmCcNp2Q@mail.gmail.com>
[not found] ` <CA+xVL_QrJ9f8-BwVRq1oG_yo2Cd=yQH9=TCm5g=MUO9MmdvRVA@mail.gmail.com>
2021-07-29 8:43 ` Oliver Neukum
2021-07-29 9:08 ` Hans de Goede
2021-08-01 7:36 ` Julian Sikorski
2021-08-01 8:46 ` Hans de Goede
[not found] ` <a645c513-794f-5171-d383-7b40fbb1ba18@gmail.com>
2021-08-01 7:47 ` Julian Sikorski
2021-09-12 20:13 ` Julian Sikorski
2021-09-13 7:38 ` Hans de Goede
[not found] ` <1f6c3026-143a-2004-24da-1da56e6305be@suse.com>
2021-09-13 11:50 ` Hans de Goede
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d11b22f3-3f09-2e3f-dc64-956193f2c5d3@gmail.com \
--to=belegdol@gmail.com \
--cc=linux-usb@vger.kernel.org \
--cc=oneukum@suse.com \
--cc=vgerlists@nathanst.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).