linux-usb.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* When VIA VL805/806 xHCI USB 3.0 Controller is present Atheros E2400 (alx) ethernet does not work: NETDEV WATCHDOG: enp5s0 (alx): transmit queue 2 timed out
@ 2023-03-19  0:37 Erhard Furtner
  2023-03-20  9:26 ` Mathias Nyman
  0 siblings, 1 reply; 6+ messages in thread
From: Erhard Furtner @ 2023-03-19  0:37 UTC (permalink / raw)
  To: linux-usb; +Cc: Mathias Nyman, Chris Snook, stable

[-- Attachment #1: Type: text/plain, Size: 13335 bytes --]

Greetings!

On my GIGABYTE GA-970-Gaming board (AM3+ board + AMD FX8370 CPU) I got this very annoying problem that onboard ethernet Atheros E2400 (alx) ceases to work when the USB 3.0 controller (VIA VL805/806 chipset) is enabled in BIOS.

In this state alx tries to set up the internet connection but fails constantly. dmesg shows this at startup:

[...]
------------[ cut here ]------------
NETDEV WATCHDOG: enp5s0 (alx): transmit queue 2 timed out
WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:526 dev_watchdog+0x1a8/0x1b0
Modules linked in: dm_mod input_leds joydev hid_generic usbhid hid snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio evdev led_class radeon snd_hda_codec_hdmi drm_ttm_helper ttm pkcs8_key_parser i2c_algo_bit drm_display_helper sg drm_kms_helper crc32_pclmul snd_hda_intel snd_intel_dspcfg sysimgblt syscopyarea sha512_ssse3 fam15h_power sysfillrect acpi_cpufreq k10temp snd_hda_codec sr_mod it87 sha512_generic aesni_intel libaes crypto_simd cryptd hwmon_vid ohci_pci cdrom hwmon ehci_pci ohci_hcd snd_hwdep i2c_piix4 ehci_hcd snd_hda_core drm xhci_pci snd_pcm xhci_hcd snd_timer drm_panel_orientation_quirks usbcore snd video usb_common wmi soundcore backlight button processor efivarfs
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.3.0-rc2-bdver2 #1
Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970-GAMING, BIOS F2 04/06/2016
RIP: 0010:dev_watchdog+0x1a8/0x1b0
Code: ff ff e9 63 ff ff ff c6 05 75 94 83 00 01 4c 89 f7 e8 0c 11 fc ff 48 c7 c7 55 9e b6 9c 4c 89 f6 48 89 c2 89 d9 e8 d8 4d 9e ff <0f> 0b e9 6e ff ff ff 90 41 57 41 56 53 49 89 fe 8b 87 c8 03 00 00
RSP: 0018:ffffb58d0015cea8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 000000007fffffff R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff931b464e1490
R13: dead000000000122 R14: ffff931b464e1000 R15: ffff931b464e13e0
FS:  0000000000000000(0000) GS:ffff93224ecc0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007facf21f5140 CR3: 00000001bcbc0000 CR4: 00000000000406e0
Call Trace:
 <IRQ>
 ? dev_init_scheduler+0x80/0x80
 ? dev_init_scheduler+0x80/0x80
 call_timer_fn+0x1d/0xa0
 __run_timers+0x178/0x1f0
 run_timer_softirq+0x14/0x30
 __do_softirq+0xc3/0x1d9
 __irq_exit_rcu+0x74/0xa0
 sysvec_apic_timer_interrupt+0x6d/0x80
 </IRQ>
 <TASK>
 asm_sysvec_apic_timer_interrupt+0x16/0x20
RIP: 0010:cpuidle_enter_state+0x119/0x210
Code: fe ff ff e8 d9 d9 90 ff e8 44 f8 ff ff 48 89 c5 31 ff e8 7a 5b 90 ff 45 84 ed 48 8b 5c 24 10 74 05 e8 5b b6 e7 ff fb 45 85 f6 <78> 4e 44 89 f0 48 6b d0 68 48 8b 4c 13 48 48 2b 6c 24 08 49 89 6f
RSP: 0018:ffffb58d000afe88 EFLAGS: 00000202
RAX: 0000000000000000 RBX: ffffffffc02cf0f0 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000683d128de R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffffffffc02c9e70 R12: 0000000000000002
R13: 0000000000000000 R14: 0000000000000002 R15: ffff931bfece7000
 ? cleanup_module+0x60/0x60 [processor]
 ? cpuidle_enter_state+0x106/0x210
 cpuidle_enter+0x24/0x40
 do_idle+0x130/0x1c0
 cpu_startup_entry+0x14/0x20
 start_secondary+0x8a/0x90
 secondary_startup_64_no_verify+0xcf/0xdb
 </TASK>
---[ end trace 0000000000000000 ]---
alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full
[...]

Some data about the system:
 # inxi -bZ
System:
  Host: outsider Kernel: 6.3.0-rc2-bdver2 arch: x86_64 bits: 64 Desktop: MATE
    v: 1.26.0 Distro: Gentoo Base System release 2.13
Machine:
  Type: Desktop Mobo: Gigabyte model: 970-GAMING v: x.x serial: N/A
    UEFI: American Megatrends v: F2 date: 04/06/2016
CPU:
  Info: 8-core AMD FX-8370 [MT MCP] speed (MHz): avg: 1400 min/max: 1400/4000
Graphics:
  Device-1: AMD Turks XT [Radeon HD 6670/7670] driver: radeon v: kernel
  Display: x11 server: X.Org v: 21.1.7 driver: X: loaded: modesetting
    unloaded: fbdev,radeon gpu: radeon resolution: 1920x1080~60Hz
  OpenGL: renderer: AMD TURKS (DRM 2.50.0 / 6.3.0-rc2-bdver2 LLVM 15.0.7)
    v: 4.5 Mesa 22.3.7
Network:
  Device-1: Qualcomm Atheros Killer E2400 Gigabit Ethernet driver: alx

 # lspci 
00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD9x0/RX980 Host Bridge (rev 02)
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD/ATI] RD890S/RD990 I/O Memory Management Unit (IOMMU)
00:02.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GFX port 0)
00:04.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 0)
00:06.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] RD890/RD9x0/RX980 PCI to PCI bridge (PCI Express GPP Port 2)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller (rev 42)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) (rev 40)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller (rev 40)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge (rev 40)
00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1)
00:16.0 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:16.2 USB controller: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Turks XT [Radeon HD 6670/7670]
01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Turks HDMI Audio [Radeon HD 6500/6600 / 6700M Series]
02:00.0 USB controller: ASMedia Technology Inc. ASM2142/ASM3142 USB 3.1 Host Controller
03:00.0 Non-Volatile memory controller: Sandisk Corp WD Blue SN550 NVMe SSD (rev 01)
05:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller (rev 10)
06:00.0 USB controller: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller (rev 01)

 # lspci -s 06:00.0 -vv
06:00.0 USB controller: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller (rev 01) (prog-if 30 [XHCI])
	Subsystem: Gigabyte Technology Co., Ltd VL805/806 xHCI USB 3.0 Controller
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 17
	IOMMU group: 12
	Region 0: Memory at fe600000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: [80] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [90] MSI: Enable- Count=1/4 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [c4] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0W
		DevCtl:	CorrErr- NonFatalErr- FatalErr- UnsupReq-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
		LnkCap:	Port #1, Speed 5GT/s, Width x1, ASPM not supported
			ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
		LnkCtl:	ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 5GT/s, Width x1
			TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range B, TimeoutDis+ NROPrPrP- LTR-
			 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
			 EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
			 FRS- TPHComp- ExtTPHComp-
			 AtomicOpsCap: 32bit- 64bit- 128bitCAS-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR- 10BitTagReq- OBFF Disabled,
			 AtomicOpsCtl: ReqEn-
		LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis+
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot
		LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete- EqualizationPhase1-
			 EqualizationPhase2- EqualizationPhase3- LinkEqualizationRequest-
			 Retimer- 2Retimers- CrosslinkRes: unsupported
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
		AERCap:	First Error Pointer: 14, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
			MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
		HeaderLog: 00000000 06010000 0000000f 04000001
	Kernel modules: xhci_pci

 # lspci -s 05:00.0 -vv
05:00.0 Ethernet controller: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller (rev 10)
	Subsystem: Gigabyte Technology Co., Ltd Killer E2400 Gigabit Ethernet Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	IOMMU group: 12
	Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=256K]
	Region 2: I/O ports at d000 [size=128]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 4096 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
			ExtTag- AttnBtn+ AttnInd+ PwrInd+ RBE+ FLReset- SlotPowerLimit 0W
		DevCtl:	CorrErr- NonFatalErr- FatalErr- UnsupReq-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- NonFatalErr+ FatalErr- UnsupReq+ AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s unlimited, L1 unlimited
			ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
		LnkCtl:	ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x1
			TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
	Capabilities: [c0] MSI: Enable- Count=1/16 Maskable+ 64bit+
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [d8] MSI-X: Enable+ Count=16 Masked-
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [100 v1] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO+ CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
		UESvrt:	DLP- SDES+ TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
		AERCap:	First Error Pointer: 14, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
			MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
		HeaderLog: 04000001 0000010f 05010000 00000000
	Capabilities: [180 v1] Device Serial Number ff-93-c2-07-1c-1b-0d-ff
	Kernel driver in use: alx


With the VIA VL805/806 USB-Controller disabled in BIOS I don't get this problem, everything works fine. But this way I loose front USB 3 ports... The other ASMedia USB 3.1 controller works fine without hampering the system.

Don't know whether this is a regression - the problem shows up on current kernel 6.2.x or 6.1.x TLS too. Kernel dmesg + .config attached.

Regards,
Erhard

[-- Attachment #2: config_63-rc2_bdver2 --]
[-- Type: application/octet-stream, Size: 119119 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/x86 6.3.0-rc2 Kernel Configuration
#
CONFIG_CC_VERSION_TEXT="clang version 15.0.7"
CONFIG_GCC_VERSION=0
CONFIG_CC_IS_CLANG=y
CONFIG_CLANG_VERSION=150007
CONFIG_AS_IS_LLVM=y
CONFIG_AS_VERSION=150007
CONFIG_LD_VERSION=0
CONFIG_LD_IS_LLD=y
CONFIG_LLD_VERSION=150007
CONFIG_CC_CAN_LINK=y
CONFIG_CC_CAN_LINK_STATIC=y
CONFIG_CC_HAS_ASM_GOTO_OUTPUT=y
CONFIG_CC_HAS_ASM_GOTO_TIED_OUTPUT=y
CONFIG_TOOLS_SUPPORT_RELR=y
CONFIG_CC_HAS_ASM_INLINE=y
CONFIG_CC_HAS_NO_PROFILE_FN_ATTR=y
CONFIG_PAHOLE_VERSION=0
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_TABLE_SORT=y
CONFIG_THREAD_INFO_IN_TASK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
# CONFIG_COMPILE_TEST is not set
# CONFIG_WERROR is not set
CONFIG_LOCALVERSION="-bdver2"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_BUILD_SALT=""
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_HAVE_KERNEL_LZ4=y
CONFIG_HAVE_KERNEL_ZSTD=y
# CONFIG_KERNEL_GZIP is not set
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
# CONFIG_KERNEL_LZ4 is not set
CONFIG_KERNEL_ZSTD=y
CONFIG_DEFAULT_INIT=""
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_WATCH_QUEUE=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_USELIB is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_IRQ_MIGRATION=y
CONFIG_HARDIRQS_SW_RESEND=y
CONFIG_IRQ_DOMAIN=y
CONFIG_IRQ_DOMAIN_HIERARCHY=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_IRQ_MSI_IOMMU=y
CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y
CONFIG_GENERIC_IRQ_RESERVATION_MODE=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
# CONFIG_GENERIC_IRQ_DEBUGFS is not set
# end of IRQ subsystem

CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_INIT=y
CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y
CONFIG_CONTEXT_TRACKING=y
CONFIG_CONTEXT_TRACKING_IDLE=y

#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ_COMMON=y
# CONFIG_HZ_PERIODIC is not set
CONFIG_NO_HZ_IDLE=y
# CONFIG_NO_HZ_FULL is not set
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CLOCKSOURCE_WATCHDOG_MAX_SKEW_US=100
# end of Timers subsystem

CONFIG_BPF=y
CONFIG_HAVE_EBPF_JIT=y
CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y

#
# BPF subsystem
#
CONFIG_BPF_SYSCALL=y
# CONFIG_BPF_JIT is not set
CONFIG_BPF_UNPRIV_DEFAULT_OFF=y
# CONFIG_BPF_PRELOAD is not set
# end of BPF subsystem

CONFIG_PREEMPT_VOLUNTARY_BUILD=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_PREEMPT_DYNAMIC is not set
# CONFIG_SCHED_CORE is not set

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set
# CONFIG_IRQ_TIME_ACCOUNTING is not set
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
# CONFIG_PSI is not set
# end of CPU/Task time and stats accounting

CONFIG_CPU_ISOLATION=y

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_RCU_EXPERT is not set
CONFIG_SRCU=y
CONFIG_TREE_SRCU=y
CONFIG_TASKS_RCU_GENERIC=y
CONFIG_TASKS_TRACE_RCU=y
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_NEED_SEGCBLIST=y
# end of RCU Subsystem

# CONFIG_IKCONFIG is not set
# CONFIG_IKHEADERS is not set
CONFIG_LOG_BUF_SHIFT=16
CONFIG_LOG_CPU_MAX_BUF_SHIFT=13
CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=13
# CONFIG_PRINTK_INDEX is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y

#
# Scheduler features
#
# end of Scheduler features

CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y
CONFIG_CC_HAS_INT128=y
CONFIG_CC_IMPLICIT_FALLTHROUGH="-Wimplicit-fallthrough"
CONFIG_GCC11_NO_ARRAY_BOUNDS=y
CONFIG_GCC12_NO_ARRAY_BOUNDS=y
CONFIG_ARCH_SUPPORTS_INT128=y
CONFIG_CGROUPS=y
CONFIG_PAGE_COUNTER=y
# CONFIG_CGROUP_FAVOR_DYNMODS is not set
CONFIG_MEMCG=y
CONFIG_MEMCG_KMEM=y
CONFIG_BLK_CGROUP=y
CONFIG_CGROUP_WRITEBACK=y
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_SCHED_MM_CID=y
CONFIG_CGROUP_PIDS=y
# CONFIG_CGROUP_RDMA is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_HUGETLB is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CGROUP_CPUACCT=y
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_BPF=y
# CONFIG_CGROUP_MISC is not set
# CONFIG_CGROUP_DEBUG is not set
CONFIG_SOCK_CGROUP_DATA=y
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
# CONFIG_TIME_NS is not set
CONFIG_IPC_NS=y
CONFIG_USER_NS=y
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_SCHED_AUTOGROUP=y
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_BOOT_CONFIG is not set
CONFIG_INITRAMFS_PRESERVE_MTIME=y
# CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_LD_ORPHAN_WARN=y
CONFIG_LD_ORPHAN_WARN_LEVEL="warn"
CONFIG_SYSCTL=y
CONFIG_HAVE_UID16=y
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_EXPERT=y
CONFIG_UID16=y
CONFIG_MULTIUSER=y
# CONFIG_SGETMASK_SYSCALL is not set
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_FHANDLE=y
CONFIG_POSIX_TIMERS=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_PCSPKR_PLATFORM is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_FUTEX_PI=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_IO_URING=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_MEMBARRIER=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_SELFTEST=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y
CONFIG_KALLSYMS_BASE_RELATIVE=y
CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y
CONFIG_KCMP=y
CONFIG_RSEQ=y
# CONFIG_DEBUG_RSEQ is not set
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
# CONFIG_PC104 is not set

#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
# end of Kernel Performance Events And Counters

CONFIG_SYSTEM_DATA_VERIFICATION=y
# CONFIG_PROFILING is not set
# end of General setup

CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_MMU=y
CONFIG_ARCH_MMAP_RND_BITS_MIN=28
CONFIG_ARCH_MMAP_RND_BITS_MAX=32
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8
CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_AUDIT_ARCH=y
CONFIG_X86_64_SMP=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_PGTABLE_LEVELS=4
CONFIG_CC_HAS_SANE_STACKPROTECTOR=y

#
# Processor type and features
#
CONFIG_SMP=y
CONFIG_X86_FEATURE_NAMES=y
# CONFIG_X86_MPPARSE is not set
# CONFIG_GOLDFISH is not set
# CONFIG_X86_CPU_RESCTRL is not set
# CONFIG_X86_EXTENDED_PLATFORM is not set
# CONFIG_X86_INTEL_LPSS is not set
# CONFIG_X86_AMD_PLATFORM_DEVICE is not set
# CONFIG_IOSF_MBI is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_HYPERVISOR_GUEST is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_PROCESSOR_SELECT=y
# CONFIG_CPU_SUP_INTEL is not set
CONFIG_CPU_SUP_AMD=y
# CONFIG_CPU_SUP_HYGON is not set
# CONFIG_CPU_SUP_CENTAUR is not set
# CONFIG_CPU_SUP_ZHAOXIN is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_GART_IOMMU is not set
CONFIG_BOOT_VESA_SUPPORT=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS_RANGE_BEGIN=2
CONFIG_NR_CPUS_RANGE_END=512
CONFIG_NR_CPUS_DEFAULT=64
CONFIG_NR_CPUS=8
# CONFIG_SCHED_CLUSTER is not set
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
# CONFIG_X86_MCELOG_LEGACY is not set
# CONFIG_X86_MCE_INTEL is not set
CONFIG_X86_MCE_AMD=y
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set

#
# Performance monitoring
#
# CONFIG_PERF_EVENTS_INTEL_RAPL is not set
CONFIG_PERF_EVENTS_AMD_POWER=m
# CONFIG_PERF_EVENTS_AMD_UNCORE is not set
# CONFIG_PERF_EVENTS_AMD_BRS is not set
# end of Performance monitoring

CONFIG_X86_VSYSCALL_EMULATION=y
CONFIG_X86_IOPL_IOPERM=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_AMD=y
# CONFIG_MICROCODE_LATE_LOADING is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_X86_5LEVEL is not set
CONFIG_X86_DIRECT_GBPAGES=y
# CONFIG_X86_CPA_STATISTICS is not set
# CONFIG_AMD_MEM_ENCRYPT is not set
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
# CONFIG_X86_PMEM_LEGACY is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
# CONFIG_X86_UMIP is not set
CONFIG_CC_HAS_IBT=y
# CONFIG_X86_KERNEL_IBT is not set
# CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS is not set
CONFIG_EFI=y
CONFIG_EFI_STUB=y
# CONFIG_EFI_HANDOVER_PROTOCOL is not set
# CONFIG_EFI_MIXED is not set
# CONFIG_EFI_FAKE_MEMMAP is not set
CONFIG_EFI_RUNTIME_MAP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_KEXEC_FILE is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_RANDOMIZE_BASE=y
CONFIG_X86_NEED_RELOCS=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_DYNAMIC_MEMORY_LAYOUT=y
CONFIG_RANDOMIZE_MEMORY=y
CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0x1
CONFIG_HOTPLUG_CPU=y
# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set
# CONFIG_DEBUG_HOTPLUG_CPU0 is not set
# CONFIG_COMPAT_VDSO is not set
# CONFIG_LEGACY_VSYSCALL_XONLY is not set
CONFIG_LEGACY_VSYSCALL_NONE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_MODIFY_LDT_SYSCALL is not set
# CONFIG_STRICT_SIGALTSTACK_SIZE is not set
CONFIG_HAVE_LIVEPATCH=y
# end of Processor type and features

CONFIG_CC_HAS_SLS=y
CONFIG_CC_HAS_RETURN_THUNK=y
CONFIG_CC_HAS_ENTRY_PADDING=y
CONFIG_FUNCTION_PADDING_CFI=11
CONFIG_FUNCTION_PADDING_BYTES=16
CONFIG_HAVE_CALL_THUNKS=y
CONFIG_SPECULATION_MITIGATIONS=y
CONFIG_PAGE_TABLE_ISOLATION=y
CONFIG_RETPOLINE=y
CONFIG_RETHUNK=y
CONFIG_CPU_UNRET_ENTRY=y
# CONFIG_CPU_IBPB_ENTRY is not set
CONFIG_SLS=y
CONFIG_ARCH_HAS_ADD_PAGES=y
CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y

#
# Power management and ACPI options
#
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_CLK=y
CONFIG_WQ_POWER_EFFICIENT_DEFAULT=y
# CONFIG_ENERGY_MODEL is not set
CONFIG_ARCH_SUPPORTS_ACPI=y
CONFIG_ACPI=y
CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y
# CONFIG_ACPI_DEBUGGER is not set
# CONFIG_ACPI_SPCR_TABLE is not set
CONFIG_ACPI_FPDT=y
CONFIG_ACPI_LPIT=y
CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y
# CONFIG_ACPI_EC_DEBUGFS is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=m
# CONFIG_ACPI_TINY_POWER_BUTTON is not set
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_CPU_FREQ_PSS=y
CONFIG_ACPI_PROCESSOR_CSTATE=y
CONFIG_ACPI_PROCESSOR_IDLE=y
CONFIG_ACPI_PROCESSOR=m
# CONFIG_ACPI_IPMI is not set
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_PROCESSOR_AGGREGATOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_HOTPLUG_IOAPIC=y
# CONFIG_ACPI_SBS is not set
CONFIG_ACPI_HED=y
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_BGRT is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_ACPI_NFIT is not set
CONFIG_HAVE_ACPI_APEI=y
CONFIG_HAVE_ACPI_APEI_NMI=y
# CONFIG_ACPI_APEI is not set
# CONFIG_ACPI_DPTF is not set
# CONFIG_ACPI_EXTLOG is not set
# CONFIG_ACPI_CONFIGFS is not set
# CONFIG_ACPI_PFRUT is not set
# CONFIG_ACPI_FFH is not set
CONFIG_PMIC_OPREGION=y
CONFIG_ACPI_PRMT=y
CONFIG_X86_PM_TIMER=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_GOV_ATTR_SET=y
CONFIG_CPU_FREQ_GOV_COMMON=y
# CONFIG_CPU_FREQ_STAT is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
# CONFIG_CPU_FREQ_GOV_SCHEDUTIL is not set

#
# CPU frequency scaling drivers
#
# CONFIG_X86_INTEL_PSTATE is not set
# CONFIG_X86_PCC_CPUFREQ is not set
# CONFIG_X86_AMD_PSTATE is not set
# CONFIG_X86_AMD_PSTATE_UT is not set
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_ACPI_CPUFREQ_CPB is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_AMD_FREQ_SENSITIVITY is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set

#
# shared options
#
# end of CPU Frequency scaling

#
# CPU Idle
#
CONFIG_CPU_IDLE=y
# CONFIG_CPU_IDLE_GOV_LADDER is not set
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_CPU_IDLE_GOV_TEO is not set
# end of CPU Idle
# end of Power management and ACPI options

#
# Bus options (PCI etc.)
#
CONFIG_PCI_DIRECT=y
# CONFIG_PCI_MMCONFIG is not set
# CONFIG_PCI_CNB20LE_QUIRK is not set
# CONFIG_ISA_BUS is not set
# CONFIG_ISA_DMA_API is not set
CONFIG_AMD_NB=y
# end of Bus options (PCI etc.)

#
# Binary Emulations
#
CONFIG_IA32_EMULATION=y
CONFIG_COMPAT_32=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
# end of Binary Emulations

CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set
CONFIG_AS_AVX512=y
CONFIG_AS_SHA1_NI=y
CONFIG_AS_SHA256_NI=y
CONFIG_AS_TPAUSE=y
CONFIG_AS_GFNI=y

#
# General architecture-dependent options
#
CONFIG_HOTPLUG_SMT=y
CONFIG_GENERIC_ENTRY=y
# CONFIG_KPROBES is not set
CONFIG_JUMP_LABEL=y
# CONFIG_STATIC_KEYS_SELFTEST is not set
# CONFIG_STATIC_CALL_SELFTEST is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_ARCH_USE_BUILTIN_BSWAP=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_KPROBES_ON_FTRACE=y
CONFIG_ARCH_CORRECT_STACKTRACE_ON_KRETPROBE=y
CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y
CONFIG_HAVE_NMI=y
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_CONTIGUOUS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
CONFIG_ARCH_HAS_SET_MEMORY=y
CONFIG_ARCH_HAS_SET_DIRECT_MAP=y
CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y
CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y
CONFIG_ARCH_WANTS_NO_INSTR=y
CONFIG_HAVE_ASM_MODVERSIONS=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_RSEQ=y
CONFIG_HAVE_RUST=y
CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y
CONFIG_MMU_GATHER_MERGE_VMAS=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_ARCH_HAS_NMI_SAFE_THIS_CPU_OPS=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_HAVE_ARCH_SECCOMP=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP=y
CONFIG_SECCOMP_FILTER=y
# CONFIG_SECCOMP_CACHE_DEBUG is not set
CONFIG_HAVE_ARCH_STACKLEAK=y
CONFIG_HAVE_STACKPROTECTOR=y
CONFIG_STACKPROTECTOR=y
# CONFIG_STACKPROTECTOR_STRONG is not set
CONFIG_ARCH_SUPPORTS_LTO_CLANG=y
CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y
CONFIG_HAS_LTO_CLANG=y
CONFIG_LTO_NONE=y
# CONFIG_LTO_CLANG_FULL is not set
# CONFIG_LTO_CLANG_THIN is not set
CONFIG_ARCH_SUPPORTS_CFI_CLANG=y
CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y
CONFIG_HAVE_CONTEXT_TRACKING_USER=y
CONFIG_HAVE_CONTEXT_TRACKING_USER_OFFSTACK=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_MOVE_PUD=y
CONFIG_HAVE_MOVE_PMD=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y
CONFIG_HAVE_ARCH_HUGE_VMAP=y
CONFIG_HAVE_ARCH_HUGE_VMALLOC=y
CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
CONFIG_HAVE_ARCH_SOFT_DIRTY=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y
CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y
CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y
CONFIG_SOFTIRQ_ON_OWN_STACK=y
CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
CONFIG_HAVE_ARCH_MMAP_RND_BITS=y
CONFIG_HAVE_EXIT_THREAD=y
CONFIG_ARCH_MMAP_RND_BITS=28
CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y
CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8
CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y
CONFIG_PAGE_SIZE_LESS_THAN_64KB=y
CONFIG_PAGE_SIZE_LESS_THAN_256KB=y
CONFIG_HAVE_OBJTOOL=y
CONFIG_HAVE_JUMP_LABEL_HACK=y
CONFIG_HAVE_NOINSTR_HACK=y
CONFIG_HAVE_NOINSTR_VALIDATION=y
CONFIG_HAVE_UACCESS_VALIDATION=y
CONFIG_HAVE_STACK_VALIDATION=y
CONFIG_HAVE_RELIABLE_STACKTRACE=y
CONFIG_OLD_SIGSUSPEND3=y
CONFIG_COMPAT_OLD_SIGACTION=y
CONFIG_COMPAT_32BIT_TIME=y
CONFIG_HAVE_ARCH_VMAP_STACK=y
CONFIG_VMAP_STACK=y
CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET=y
CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT=y
CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
CONFIG_STRICT_KERNEL_RWX=y
CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
CONFIG_STRICT_MODULE_RWX=y
CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y
CONFIG_ARCH_USE_MEMREMAP_PROT=y
# CONFIG_LOCK_EVENT_COUNTS is not set
CONFIG_ARCH_HAS_MEM_ENCRYPT=y
CONFIG_HAVE_STATIC_CALL=y
CONFIG_HAVE_STATIC_CALL_INLINE=y
CONFIG_HAVE_PREEMPT_DYNAMIC=y
CONFIG_HAVE_PREEMPT_DYNAMIC_CALL=y
CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_ARCH_SUPPORTS_PAGE_TABLE_CHECK=y
CONFIG_ARCH_HAS_ELFCORE_COMPAT=y
CONFIG_ARCH_HAS_PARANOID_L1D_FLUSH=y
CONFIG_DYNAMIC_SIGFRAME=y
CONFIG_ARCH_HAS_NONLEAF_PMD_YOUNG=y

#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
# end of GCOV-based kernel profiling

CONFIG_HAVE_GCC_PLUGINS=y
CONFIG_FUNCTION_ALIGNMENT_4B=y
CONFIG_FUNCTION_ALIGNMENT_16B=y
CONFIG_FUNCTION_ALIGNMENT=16
# end of General architecture-dependent options

CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODULE_UNLOAD_TAINT_TRACKING is not set
CONFIG_MODVERSIONS=y
CONFIG_ASM_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_MODULE_COMPRESS_NONE=y
# CONFIG_MODULE_COMPRESS_GZIP is not set
# CONFIG_MODULE_COMPRESS_XZ is not set
# CONFIG_MODULE_COMPRESS_ZSTD is not set
# CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS is not set
CONFIG_MODPROBE_PATH="/sbin/modprobe"
# CONFIG_TRIM_UNUSED_KSYMS is not set
CONFIG_MODULES_TREE_LOOKUP=y
CONFIG_BLOCK=y
# CONFIG_BLOCK_LEGACY_AUTOLOAD is not set
CONFIG_BLK_CGROUP_RWSTAT=y
CONFIG_BLK_DEV_BSG_COMMON=y
CONFIG_BLK_DEV_BSGLIB=y
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_INTEGRITY_T10=y
# CONFIG_BLK_DEV_ZONED is not set
CONFIG_BLK_DEV_THROTTLING=y
# CONFIG_BLK_DEV_THROTTLING_LOW is not set
CONFIG_BLK_WBT=y
CONFIG_BLK_WBT_MQ=y
# CONFIG_BLK_CGROUP_IOLATENCY is not set
# CONFIG_BLK_CGROUP_IOCOST is not set
# CONFIG_BLK_CGROUP_IOPRIO is not set
CONFIG_BLK_DEBUG_FS=y
# CONFIG_BLK_SED_OPAL is not set
# CONFIG_BLK_INLINE_ENCRYPTION is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
CONFIG_AMIGA_PARTITION=y
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set
# end of Partition Types

CONFIG_BLOCK_COMPAT=y
CONFIG_BLK_MQ_PCI=y
CONFIG_BLK_PM=y
CONFIG_BLOCK_HOLDER_DEPRECATED=y
CONFIG_BLK_MQ_STACKING=y

#
# IO Schedulers
#
# CONFIG_MQ_IOSCHED_DEADLINE is not set
CONFIG_MQ_IOSCHED_KYBER=y
# CONFIG_IOSCHED_BFQ is not set
# end of IO Schedulers

CONFIG_PADATA=y
CONFIG_ASN1=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_RWSEM_SPIN_ON_OWNER=y
CONFIG_LOCK_SPIN_ON_OWNER=y
CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y
CONFIG_QUEUED_SPINLOCKS=y
CONFIG_ARCH_USE_QUEUED_RWLOCKS=y
CONFIG_QUEUED_RWLOCKS=y
CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y
CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y
CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ELFCORE=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_BINFMT_MISC is not set
CONFIG_COREDUMP=y
# end of Executable file formats

#
# Memory Management options
#
CONFIG_ZPOOL=y
CONFIG_SWAP=y
CONFIG_ZSWAP=y
CONFIG_ZSWAP_DEFAULT_ON=y
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set
# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set
CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD=y
CONFIG_ZSWAP_COMPRESSOR_DEFAULT="zstd"
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD=y
# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set
CONFIG_ZSWAP_ZPOOL_DEFAULT="z3fold"
# CONFIG_ZBUD is not set
CONFIG_Z3FOLD=y
CONFIG_ZSMALLOC=m
# CONFIG_ZSMALLOC_STAT is not set
CONFIG_ZSMALLOC_CHAIN_SIZE=8

#
# SLAB allocator options
#
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB_DEPRECATED is not set
# CONFIG_SLUB_TINY is not set
# CONFIG_SLAB_MERGE_DEFAULT is not set
CONFIG_SLAB_FREELIST_RANDOM=y
CONFIG_SLAB_FREELIST_HARDENED=y
# CONFIG_SLUB_STATS is not set
# CONFIG_SLUB_CPU_PARTIAL is not set
# end of SLAB allocator options

CONFIG_SHUFFLE_PAGE_ALLOCATOR=y
# CONFIG_COMPAT_BRK is not set
CONFIG_SPARSEMEM=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_FAST_GUP=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_EXCLUSIVE_SYSTEM_RAM=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y
CONFIG_COMPACTION=y
CONFIG_COMPACT_UNEVICTABLE_DEFAULT=1
# CONFIG_PAGE_REPORTING is not set
CONFIG_MIGRATION=y
CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y
CONFIG_ARCH_ENABLE_THP_MIGRATION=y
CONFIG_CONTIG_ALLOC=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_MMU_NOTIFIER=y
CONFIG_KSM=y
CONFIG_DEFAULT_MMAP_MIN_ADDR=65536
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
CONFIG_MEMORY_FAILURE=y
# CONFIG_HWPOISON_INJECT is not set
CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
CONFIG_ARCH_WANTS_THP_SWAP=y
CONFIG_TRANSPARENT_HUGEPAGE=y
# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set
CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y
CONFIG_THP_SWAP=y
# CONFIG_READ_ONLY_THP_FOR_FS is not set
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_FRONTSWAP=y
# CONFIG_CMA is not set
CONFIG_GENERIC_EARLY_IOREMAP=y
CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
# CONFIG_IDLE_PAGE_TRACKING is not set
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CURRENT_STACK_POINTER=y
CONFIG_ARCH_HAS_PTE_DEVMAP=y
CONFIG_ARCH_HAS_ZONE_DMA_SET=y
CONFIG_ZONE_DMA=y
CONFIG_ZONE_DMA32=y
CONFIG_VM_EVENT_COUNTERS=y
# CONFIG_PERCPU_STATS is not set
# CONFIG_GUP_TEST is not set
CONFIG_ARCH_HAS_PTE_SPECIAL=y
CONFIG_SECRETMEM=y
# CONFIG_ANON_VMA_NAME is not set
CONFIG_USERFAULTFD=y
CONFIG_HAVE_ARCH_USERFAULTFD_WP=y
CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y
CONFIG_PTE_MARKER_UFFD_WP=y
CONFIG_LRU_GEN=y
CONFIG_LRU_GEN_ENABLED=y
# CONFIG_LRU_GEN_STATS is not set

#
# Data Access Monitoring
#
# CONFIG_DAMON is not set
# end of Data Access Monitoring
# end of Memory Management options

CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
CONFIG_SKB_EXTENSIONS=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_DIAG=m
CONFIG_UNIX=y
CONFIG_UNIX_SCM=y
CONFIG_AF_UNIX_OOB=y
CONFIG_UNIX_DIAG=m
CONFIG_TLS=m
CONFIG_TLS_DEVICE=y
# CONFIG_TLS_TOE is not set
CONFIG_XFRM=y
CONFIG_XFRM_ALGO=m
CONFIG_XFRM_USER=m
# CONFIG_XFRM_USER_COMPAT is not set
# CONFIG_XFRM_INTERFACE is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_XFRM_AH=m
CONFIG_XFRM_ESP=m
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
# CONFIG_XDP_SOCKETS is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE_DEMUX is not set
CONFIG_NET_IP_TUNNEL=m
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
CONFIG_NET_UDP_TUNNEL=m
# CONFIG_NET_FOU is not set
# CONFIG_NET_FOU_IP_TUNNELS is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
# CONFIG_INET_ESP_OFFLOAD is not set
# CONFIG_INET_ESPINTCP is not set
CONFIG_INET_IPCOMP=m
CONFIG_INET_TABLE_PERTURB_ORDER=16
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
# CONFIG_INET_DIAG is not set
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_CUBIC is not set
CONFIG_TCP_CONG_WESTWOOD=y
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
# CONFIG_TCP_CONG_VEGAS is not set
# CONFIG_TCP_CONG_NV is not set
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_TCP_CONG_DCTCP is not set
# CONFIG_TCP_CONG_CDG is not set
# CONFIG_TCP_CONG_BBR is not set
CONFIG_DEFAULT_WESTWOOD=y
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="westwood"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_IPV6_OPTIMISTIC_DAD=y
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
# CONFIG_INET6_ESP_OFFLOAD is not set
# CONFIG_INET6_ESPINTCP is not set
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
# CONFIG_IPV6_VTI is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_SIT_6RD=y
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
CONFIG_IPV6_MULTIPLE_TABLES=y
# CONFIG_IPV6_SUBTREES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_IPV6_SEG6_LWTUNNEL is not set
# CONFIG_IPV6_SEG6_HMAC is not set
# CONFIG_IPV6_RPL_LWTUNNEL is not set
# CONFIG_IPV6_IOAM6_LWTUNNEL is not set
# CONFIG_NETLABEL is not set
# CONFIG_MPTCP is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_BPFILTER is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set
# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set
CONFIG_SCTP_COOKIE_HMAC_MD5=y
CONFIG_SCTP_COOKIE_HMAC_SHA1=y
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_LLC2 is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_6LOWPAN is not set
# CONFIG_IEEE802154 is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
# CONFIG_NET_SCH_HTB is not set
# CONFIG_NET_SCH_HFSC is not set
# CONFIG_NET_SCH_PRIO is not set
# CONFIG_NET_SCH_MULTIQ is not set
# CONFIG_NET_SCH_RED is not set
# CONFIG_NET_SCH_SFB is not set
# CONFIG_NET_SCH_SFQ is not set
# CONFIG_NET_SCH_TEQL is not set
# CONFIG_NET_SCH_TBF is not set
# CONFIG_NET_SCH_CBS is not set
# CONFIG_NET_SCH_ETF is not set
# CONFIG_NET_SCH_TAPRIO is not set
# CONFIG_NET_SCH_GRED is not set
# CONFIG_NET_SCH_NETEM is not set
# CONFIG_NET_SCH_DRR is not set
# CONFIG_NET_SCH_MQPRIO is not set
# CONFIG_NET_SCH_SKBPRIO is not set
# CONFIG_NET_SCH_CHOKE is not set
# CONFIG_NET_SCH_QFQ is not set
# CONFIG_NET_SCH_CODEL is not set
CONFIG_NET_SCH_FQ_CODEL=y
# CONFIG_NET_SCH_CAKE is not set
# CONFIG_NET_SCH_FQ is not set
# CONFIG_NET_SCH_HHF is not set
# CONFIG_NET_SCH_PIE is not set
# CONFIG_NET_SCH_PLUG is not set
# CONFIG_NET_SCH_ETS is not set
CONFIG_NET_SCH_DEFAULT=y
CONFIG_DEFAULT_FQ_CODEL=y
# CONFIG_DEFAULT_PFIFO_FAST is not set
CONFIG_DEFAULT_NET_SCH="fq_codel"

#
# Classification
#
# CONFIG_NET_CLS_BASIC is not set
# CONFIG_NET_CLS_ROUTE4 is not set
# CONFIG_NET_CLS_FW is not set
# CONFIG_NET_CLS_U32 is not set
# CONFIG_NET_CLS_FLOW is not set
# CONFIG_NET_CLS_CGROUP is not set
# CONFIG_NET_CLS_BPF is not set
# CONFIG_NET_CLS_FLOWER is not set
# CONFIG_NET_CLS_MATCHALL is not set
# CONFIG_NET_EMATCH is not set
# CONFIG_NET_CLS_ACT is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_VSOCKETS=m
CONFIG_VSOCKETS_DIAG=m
# CONFIG_VSOCKETS_LOOPBACK is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_MPLS is not set
# CONFIG_NET_NSH is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
# CONFIG_NET_L3_MASTER_DEV is not set
# CONFIG_QRTR is not set
# CONFIG_NET_NCSI is not set
CONFIG_PCPU_DEV_REFCNT=y
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_SOCK_RX_QUEUE_MAPPING=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
# CONFIG_BPF_STREAM_PARSER is not set
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# end of Network testing
# end of Networking options

# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_BT=m
CONFIG_BT_BREDR=y
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
CONFIG_BT_HS=y
CONFIG_BT_LE=y
CONFIG_BT_LE_L2CAP_ECRED=y
CONFIG_BT_LEDS=y
CONFIG_BT_MSFTEXT=y
CONFIG_BT_AOSPEXT=y
CONFIG_BT_DEBUGFS=y
# CONFIG_BT_SELFTEST is not set
CONFIG_BT_FEATURE_DEBUG=y

#
# Bluetooth device drivers
#
CONFIG_BT_INTEL=m
CONFIG_BT_BCM=m
CONFIG_BT_RTL=m
CONFIG_BT_MTK=m
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y
CONFIG_BT_HCIBTUSB_POLL_SYNC=y
CONFIG_BT_HCIBTUSB_BCM=y
CONFIG_BT_HCIBTUSB_MTK=y
CONFIG_BT_HCIBTUSB_RTL=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_ATH3K=y
CONFIG_BT_HCIUART_AG6XX=y
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBCM4377 is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_BT_MRVL=m
CONFIG_BT_ATH3K=m
# end of Bluetooth device drivers

# CONFIG_AF_RXRPC is not set
# CONFIG_AF_KCM is not set
CONFIG_STREAM_PARSER=y
# CONFIG_MCTP is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y
CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
CONFIG_CFG80211_CRDA_SUPPORT=y
CONFIG_CFG80211_WEXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_MAC80211_STA_HASH_MAX_SIZE=0
CONFIG_RFKILL=m
CONFIG_RFKILL_LEDS=y
# CONFIG_RFKILL_INPUT is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
# CONFIG_PSAMPLE is not set
# CONFIG_NET_IFE is not set
# CONFIG_LWTUNNEL is not set
CONFIG_DST_CACHE=y
CONFIG_GRO_CELLS=y
CONFIG_SOCK_VALIDATE_XMIT=y
CONFIG_NET_SOCK_MSG=y
CONFIG_PAGE_POOL=y
# CONFIG_PAGE_POOL_STATS is not set
# CONFIG_FAILOVER is not set
# CONFIG_ETHTOOL_NETLINK is not set

#
# Device Drivers
#
CONFIG_HAVE_EISA=y
# CONFIG_EISA is not set
CONFIG_HAVE_PCI=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
# CONFIG_PCIEAER_INJECT is not set
# CONFIG_PCIE_ECRC is not set
CONFIG_PCIEASPM=y
CONFIG_PCIEASPM_DEFAULT=y
# CONFIG_PCIEASPM_POWERSAVE is not set
# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set
# CONFIG_PCIEASPM_PERFORMANCE is not set
CONFIG_PCIE_PME=y
# CONFIG_PCIE_DPC is not set
# CONFIG_PCIE_PTM is not set
CONFIG_PCI_MSI=y
CONFIG_PCI_QUIRKS=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_PCI_ATS=y
CONFIG_PCI_LOCKLESS_CONFIG=y
# CONFIG_PCI_IOV is not set
CONFIG_PCI_PRI=y
CONFIG_PCI_PASID=y
CONFIG_PCI_LABEL=y
# CONFIG_PCIE_BUS_TUNE_OFF is not set
CONFIG_PCIE_BUS_DEFAULT=y
# CONFIG_PCIE_BUS_SAFE is not set
# CONFIG_PCIE_BUS_PERFORMANCE is not set
# CONFIG_PCIE_BUS_PEER2PEER is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=4
# CONFIG_HOTPLUG_PCI is not set

#
# PCI controller drivers
#
# CONFIG_VMD is not set

#
# DesignWare PCI Core Support
#
# CONFIG_PCIE_DW_PLAT_HOST is not set
# CONFIG_PCI_MESON is not set
# end of DesignWare PCI Core Support

#
# Mobiveil PCIe Core Support
#
# end of Mobiveil PCIe Core Support

#
# Cadence PCIe controllers support
#
# end of Cadence PCIe controllers support
# end of PCI controller drivers

#
# PCI Endpoint
#
# CONFIG_PCI_ENDPOINT is not set
# end of PCI Endpoint

#
# PCI switch controller drivers
#
# CONFIG_PCI_SW_SWITCHTEC is not set
# end of PCI switch controller drivers

# CONFIG_CXL_BUS is not set
# CONFIG_PCCARD is not set
# CONFIG_RAPIDIO is not set

#
# Generic Driver Options
#
# CONFIG_UEVENT_HELPER is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_DEVTMPFS_SAFE=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y

#
# Firmware loader
#
CONFIG_FW_LOADER=y
CONFIG_EXTRA_FIRMWARE="amd-ucode/microcode_amd_fam15h.bin"
CONFIG_EXTRA_FIRMWARE_DIR="/lib/firmware"
# CONFIG_FW_LOADER_USER_HELPER is not set
CONFIG_FW_LOADER_COMPRESS=y
# CONFIG_FW_LOADER_COMPRESS_XZ is not set
CONFIG_FW_LOADER_COMPRESS_ZSTD=y
# CONFIG_FW_UPLOAD is not set
# end of Firmware loader

CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set
# CONFIG_TEST_ASYNC_DRIVER_PROBE is not set
CONFIG_GENERIC_CPU_AUTOPROBE=y
CONFIG_GENERIC_CPU_VULNERABILITIES=y
CONFIG_REGMAP=y
CONFIG_REGMAP_I2C=m
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_DMA_FENCE_TRACE is not set
# end of Generic Driver Options

#
# Bus devices
#
# CONFIG_MHI_BUS is not set
# CONFIG_MHI_BUS_EP is not set
# end of Bus devices

# CONFIG_CONNECTOR is not set

#
# Firmware Drivers
#

#
# ARM System Control and Management Interface Protocol
#
# end of ARM System Control and Management Interface Protocol

# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
CONFIG_DMIID=y
CONFIG_DMI_SYSFS=m
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y
# CONFIG_FW_CFG_SYSFS is not set
CONFIG_SYSFB=y
CONFIG_SYSFB_SIMPLEFB=y
# CONFIG_GOOGLE_FIRMWARE is not set

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_ESRT=y
CONFIG_EFI_DXE_MEM_ATTRIBUTES=y
CONFIG_EFI_RUNTIME_WRAPPERS=y
# CONFIG_EFI_BOOTLOADER_CONTROL is not set
# CONFIG_EFI_CAPSULE_LOADER is not set
# CONFIG_EFI_TEST is not set
# CONFIG_APPLE_PROPERTIES is not set
# CONFIG_RESET_ATTACK_MITIGATION is not set
# CONFIG_EFI_RCI2_TABLE is not set
# CONFIG_EFI_DISABLE_PCI_DMA is not set
# CONFIG_EFI_CUSTOM_SSDT_OVERLAYS is not set
# CONFIG_EFI_DISABLE_RUNTIME is not set
# CONFIG_EFI_COCO_SECRET is not set
# end of EFI (Extensible Firmware Interface) Support

#
# Tegra firmware driver
#
# end of Tegra firmware driver
# end of Firmware Drivers

# CONFIG_GNSS is not set
# CONFIG_MTD is not set
# CONFIG_OF is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
CONFIG_CDROM=m
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
CONFIG_ZRAM=m
CONFIG_ZRAM_DEF_COMP_LZORLE=y
# CONFIG_ZRAM_DEF_COMP_ZSTD is not set
# CONFIG_ZRAM_DEF_COMP_LZO is not set
CONFIG_ZRAM_DEF_COMP="lzo-rle"
# CONFIG_ZRAM_WRITEBACK is not set
CONFIG_ZRAM_MEMORY_TRACKING=y
CONFIG_ZRAM_MULTI_COMP=y
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_UBLK is not set

#
# NVME Support
#
CONFIG_NVME_CORE=y
CONFIG_BLK_DEV_NVME=y
# CONFIG_NVME_MULTIPATH is not set
CONFIG_NVME_VERBOSE_ERRORS=y
# CONFIG_NVME_FC is not set
# CONFIG_NVME_TCP is not set
# CONFIG_NVME_AUTH is not set
# CONFIG_NVME_TARGET is not set
# end of NVME Support

#
# Misc devices
#
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_SRAM is not set
# CONFIG_DW_XDATA_PCIE is not set
# CONFIG_PCI_ENDPOINT_TEST is not set
# CONFIG_XILINX_SDFEC is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_EEPROM_IDT_89HPESX is not set
# CONFIG_EEPROM_EE1004 is not set
# end of EEPROM support

# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# end of Texas Instruments shared transport line discipline

# CONFIG_SENSORS_LIS3_I2C is not set
# CONFIG_ALTERA_STAPL is not set
# CONFIG_INTEL_MEI is not set
# CONFIG_INTEL_MEI_ME is not set
# CONFIG_INTEL_MEI_TXE is not set
# CONFIG_VMWARE_VMCI is not set
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_BCM_VK is not set
# CONFIG_MISC_ALCOR_PCI is not set
# CONFIG_MISC_RTSX_PCI is not set
# CONFIG_MISC_RTSX_USB is not set
# CONFIG_UACCE is not set
# CONFIG_PVPANIC is not set
# end of Misc devices

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI_COMMON=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_PROC_FS is not set

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_CHR_DEV_SG=m
CONFIG_BLK_DEV_BSG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
CONFIG_SCSI_SCAN_ASYNC=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# end of SCSI Transports

# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# end of SCSI device support

CONFIG_ATA=y
CONFIG_SATA_HOST=y
CONFIG_PATA_TIMINGS=y
CONFIG_ATA_VERBOSE_ERROR=y
# CONFIG_ATA_FORCE is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_ZPODD=y
# CONFIG_SATA_PMP is not set

#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
CONFIG_SATA_MOBILE_LPM_POLICY=0
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_AHCI_DWC is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_ATA_SFF is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
CONFIG_DM_DEBUG=y
CONFIG_DM_BUFIO=m
CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y
# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set
CONFIG_DM_BIO_PRISON=m
CONFIG_DM_PERSISTENT_DATA=m
# CONFIG_DM_UNSTRIPED is not set
CONFIG_DM_CRYPT=m
# CONFIG_DM_SNAPSHOT is not set
CONFIG_DM_THIN_PROVISIONING=m
# CONFIG_DM_CACHE is not set
# CONFIG_DM_WRITECACHE is not set
# CONFIG_DM_EBS is not set
# CONFIG_DM_ERA is not set
# CONFIG_DM_CLONE is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_RAID is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_DUST is not set
CONFIG_DM_UEVENT=y
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_DM_LOG_WRITES is not set
# CONFIG_DM_INTEGRITY is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# end of IEEE 1394 (FireWire) support

# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
# CONFIG_DUMMY is not set
CONFIG_WIREGUARD=m
# CONFIG_WIREGUARD_DEBUG is not set
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_IPVLAN is not set
# CONFIG_VXLAN is not set
# CONFIG_GENEVE is not set
# CONFIG_BAREUDP is not set
# CONFIG_GTP is not set
# CONFIG_MACSEC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN is not set
# CONFIG_TUN_VNET_CROSS_LE is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set
CONFIG_ETHERNET=y
CONFIG_MDIO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_NET_VENDOR_ADAPTEC is not set
# CONFIG_NET_VENDOR_AGERE is not set
# CONFIG_NET_VENDOR_ALACRITECH is not set
# CONFIG_NET_VENDOR_ALTEON is not set
# CONFIG_ALTERA_TSE is not set
# CONFIG_NET_VENDOR_AMAZON is not set
# CONFIG_NET_VENDOR_AMD is not set
# CONFIG_NET_VENDOR_AQUANTIA is not set
# CONFIG_NET_VENDOR_ARC is not set
# CONFIG_NET_VENDOR_ASIX is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
CONFIG_ALX=y
# CONFIG_CX_ECAT is not set
# CONFIG_NET_VENDOR_BROADCOM is not set
# CONFIG_NET_VENDOR_CADENCE is not set
# CONFIG_NET_VENDOR_CAVIUM is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_CISCO is not set
# CONFIG_NET_VENDOR_CORTINA is not set
# CONFIG_NET_VENDOR_DAVICOM is not set
# CONFIG_DNET is not set
# CONFIG_NET_VENDOR_DEC is not set
# CONFIG_NET_VENDOR_DLINK is not set
# CONFIG_NET_VENDOR_EMULEX is not set
# CONFIG_NET_VENDOR_ENGLEDER is not set
# CONFIG_NET_VENDOR_EZCHIP is not set
# CONFIG_NET_VENDOR_FUNGIBLE is not set
# CONFIG_NET_VENDOR_GOOGLE is not set
# CONFIG_NET_VENDOR_HUAWEI is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_WANGXUN is not set
# CONFIG_JME is not set
# CONFIG_NET_VENDOR_LITEX is not set
# CONFIG_NET_VENDOR_MARVELL is not set
# CONFIG_NET_VENDOR_MELLANOX is not set
# CONFIG_NET_VENDOR_MICREL is not set
# CONFIG_NET_VENDOR_MICROCHIP is not set
# CONFIG_NET_VENDOR_MICROSEMI is not set
# CONFIG_NET_VENDOR_MICROSOFT is not set
# CONFIG_NET_VENDOR_MYRI is not set
# CONFIG_FEALNX is not set
# CONFIG_NET_VENDOR_NI is not set
# CONFIG_NET_VENDOR_NATSEMI is not set
# CONFIG_NET_VENDOR_NETERION is not set
# CONFIG_NET_VENDOR_NETRONOME is not set
# CONFIG_NET_VENDOR_NVIDIA is not set
# CONFIG_NET_VENDOR_OKI is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_VENDOR_PACKET_ENGINES is not set
# CONFIG_NET_VENDOR_PENSANDO is not set
# CONFIG_NET_VENDOR_QLOGIC is not set
# CONFIG_NET_VENDOR_BROCADE is not set
# CONFIG_NET_VENDOR_QUALCOMM is not set
# CONFIG_NET_VENDOR_RDC is not set
# CONFIG_NET_VENDOR_REALTEK is not set
# CONFIG_NET_VENDOR_RENESAS is not set
# CONFIG_NET_VENDOR_ROCKER is not set
# CONFIG_NET_VENDOR_SAMSUNG is not set
# CONFIG_NET_VENDOR_SEEQ is not set
# CONFIG_NET_VENDOR_SILAN is not set
# CONFIG_NET_VENDOR_SIS is not set
# CONFIG_NET_VENDOR_SOLARFLARE is not set
# CONFIG_NET_VENDOR_SMSC is not set
# CONFIG_NET_VENDOR_SOCIONEXT is not set
# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_NET_VENDOR_SUN is not set
# CONFIG_NET_VENDOR_SYNOPSYS is not set
# CONFIG_NET_VENDOR_TEHUTI is not set
# CONFIG_NET_VENDOR_TI is not set
# CONFIG_NET_VENDOR_VERTEXCOM is not set
# CONFIG_NET_VENDOR_VIA is not set
# CONFIG_NET_VENDOR_WIZNET is not set
# CONFIG_NET_VENDOR_XILINX is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_PSE_CONTROLLER is not set
# CONFIG_MDIO_DEVICE is not set

#
# PCS device drivers
#
# end of PCS device drivers

CONFIG_PPP=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_FILTER=y
CONFIG_PPP_MPPE=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPPOE=m
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m

#
# Host-side USB support is needed for USB Network Adapter support
#
# CONFIG_USB_NET_DRIVERS is not set
CONFIG_WLAN=y
# CONFIG_WLAN_VENDOR_ADMTEK is not set
# CONFIG_WLAN_VENDOR_ATH is not set
# CONFIG_WLAN_VENDOR_ATMEL is not set
# CONFIG_WLAN_VENDOR_BROADCOM is not set
# CONFIG_WLAN_VENDOR_CISCO is not set
# CONFIG_WLAN_VENDOR_INTEL is not set
# CONFIG_WLAN_VENDOR_INTERSIL is not set
# CONFIG_WLAN_VENDOR_MARVELL is not set
# CONFIG_WLAN_VENDOR_MEDIATEK is not set
# CONFIG_WLAN_VENDOR_MICROCHIP is not set
# CONFIG_WLAN_VENDOR_PURELIFI is not set
# CONFIG_WLAN_VENDOR_RALINK is not set
CONFIG_WLAN_VENDOR_REALTEK=y
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_RTL_CARDS is not set
CONFIG_RTL8XXXU=m
# CONFIG_RTL8XXXU_UNTESTED is not set
# CONFIG_RTW88 is not set
# CONFIG_RTW89 is not set
# CONFIG_WLAN_VENDOR_RSI is not set
# CONFIG_WLAN_VENDOR_SILABS is not set
# CONFIG_WLAN_VENDOR_ST is not set
# CONFIG_WLAN_VENDOR_TI is not set
# CONFIG_WLAN_VENDOR_ZYDAS is not set
# CONFIG_WLAN_VENDOR_QUANTENNA is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_VIRT_WIFI is not set
# CONFIG_WAN is not set

#
# Wireless WAN
#
# CONFIG_WWAN is not set
# end of Wireless WAN

# CONFIG_VMXNET3 is not set
# CONFIG_FUJITSU_ES is not set
# CONFIG_NETDEVSIM is not set
# CONFIG_NET_FAILOVER is not set
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_LEDS=m
CONFIG_INPUT_FF_MEMLESS=m
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_ANALOG is not set
# CONFIG_JOYSTICK_A3D is not set
# CONFIG_JOYSTICK_ADI is not set
# CONFIG_JOYSTICK_COBRA is not set
# CONFIG_JOYSTICK_GF2K is not set
# CONFIG_JOYSTICK_GRIP is not set
# CONFIG_JOYSTICK_GRIP_MP is not set
# CONFIG_JOYSTICK_GUILLEMOT is not set
# CONFIG_JOYSTICK_INTERACT is not set
# CONFIG_JOYSTICK_SIDEWINDER is not set
# CONFIG_JOYSTICK_TMDC is not set
# CONFIG_JOYSTICK_IFORCE is not set
# CONFIG_JOYSTICK_WARRIOR is not set
# CONFIG_JOYSTICK_MAGELLAN is not set
# CONFIG_JOYSTICK_SPACEORB is not set
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_AS5011 is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_JOYSTICK_XPAD=m
# CONFIG_JOYSTICK_XPAD_FF is not set
CONFIG_JOYSTICK_XPAD_LEDS=y
# CONFIG_JOYSTICK_PXRC is not set
# CONFIG_JOYSTICK_QWIIC is not set
# CONFIG_JOYSTICK_FSIA6B is not set
# CONFIG_JOYSTICK_SENSEHAT is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_AD714X is not set
# CONFIG_INPUT_BMA150 is not set
# CONFIG_INPUT_E3X0_BUTTON is not set
# CONFIG_INPUT_MMA8450 is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_KXTJ9 is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
# CONFIG_INPUT_PCF8574 is not set
# CONFIG_INPUT_DA7280_HAPTICS is not set
# CONFIG_INPUT_ADXL34X is not set
# CONFIG_INPUT_IMS_PCU is not set
# CONFIG_INPUT_IQS269A is not set
# CONFIG_INPUT_IQS626A is not set
# CONFIG_INPUT_IQS7222 is not set
# CONFIG_INPUT_CMA3000 is not set
# CONFIG_INPUT_DRV2665_HAPTICS is not set
# CONFIG_INPUT_DRV2667_HAPTICS is not set
# CONFIG_RMI4_CORE is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=m
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
# CONFIG_SERIO_I8042 is not set
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
# CONFIG_SERIO_LIBPS2 is not set
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
# CONFIG_USERIO is not set
# CONFIG_GAMEPORT is not set
# end of Hardware I/O ports
# end of Input device support

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_LEGACY_TIOCSTI is not set
# CONFIG_LDISC_AUTOLOAD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
CONFIG_SERIAL_8250_PNP=y
# CONFIG_SERIAL_8250_16550A_VARIANTS is not set
# CONFIG_SERIAL_8250_FINTEK is not set
CONFIG_SERIAL_8250_PCILIB=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_EXAR=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
# CONFIG_SERIAL_8250_PCI1XXXX is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_RT288X is not set
# CONFIG_SERIAL_8250_LPSS is not set
# CONFIG_SERIAL_8250_MID is not set
# CONFIG_SERIAL_8250_PERICOM is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_LANTIQ is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_SERIAL_FSL_LINFLEXUART is not set
# CONFIG_SERIAL_SPRD is not set
# end of Serial drivers

# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_N_GSM is not set
# CONFIG_NOZOMI is not set
# CONFIG_NULL_TTY is not set
# CONFIG_SERIAL_DEV_BUS is not set
# CONFIG_TTY_PRINTK is not set
# CONFIG_VIRTIO_CONSOLE is not set
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_DMI_DECODE=y
CONFIG_IPMI_PLAT_DATA=y
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_SSIF=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
# CONFIG_HW_RANDOM is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_DEVMEM=y
CONFIG_NVRAM=m
CONFIG_DEVPORT=y
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
# CONFIG_XILLYBUS is not set
# CONFIG_XILLYUSB is not set
# end of Character devices

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
# CONFIG_I2C_COMPAT is not set
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_AMD_MP2 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_ISMT is not set
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_NVIDIA_GPU is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
CONFIG_I2C_SCMI=m

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PLATFORM is not set
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EMEV2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_CP2615 is not set
# CONFIG_I2C_PCI1XXXX is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_MLXCPLD is not set
# CONFIG_I2C_VIRTIO is not set
# end of I2C Hardware Bus support

# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# end of I2C support

# CONFIG_I3C is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set
# CONFIG_PPS is not set

#
# PTP clock support
#
# CONFIG_PTP_1588_CLOCK is not set
CONFIG_PTP_1588_CLOCK_OPTIONAL=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
# end of PTP clock support

# CONFIG_PINCTRL is not set
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_RESET is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_IP5XXX_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_CHARGER_ADP5061 is not set
# CONFIG_BATTERY_CW2015 is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SAMSUNG_SDI is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_CHARGER_SBS is not set
# CONFIG_BATTERY_BQ27XXX is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_LTC4162L is not set
# CONFIG_CHARGER_MAX77976 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_BATTERY_GAUGE_LTC2941 is not set
# CONFIG_BATTERY_GOLDFISH is not set
# CONFIG_BATTERY_RT5033 is not set
# CONFIG_CHARGER_BD99954 is not set
# CONFIG_BATTERY_UG3105 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_HWMON_DEBUG_CHIP=y

#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM1177 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_AHT10 is not set
# CONFIG_SENSORS_AQUACOMPUTER_D5NEXT is not set
# CONFIG_SENSORS_AS370 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_AXI_FAN_CONTROL is not set
# CONFIG_SENSORS_K8TEMP is not set
CONFIG_SENSORS_K10TEMP=m
CONFIG_SENSORS_FAM15H_POWER=m
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_CORSAIR_CPRO is not set
# CONFIG_SENSORS_CORSAIR_PSU is not set
CONFIG_SENSORS_DRIVETEMP=m
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_DELL_SMM is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_I5500 is not set
# CONFIG_SENSORS_CORETEMP is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_JC42=m
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC2947_I2C is not set
# CONFIG_SENSORS_LTC2990 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX127 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX31730 is not set
# CONFIG_SENSORS_MAX31760 is not set
# CONFIG_SENSORS_MAX6620 is not set
# CONFIG_SENSORS_MAX6621 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_MAX31790 is not set
# CONFIG_SENSORS_MC34VR500 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_TC654 is not set
# CONFIG_SENSORS_TPS23861 is not set
# CONFIG_SENSORS_MR75203 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT6775_I2C is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_NPCM7XX is not set
# CONFIG_SENSORS_NZXT_KRAKEN2 is not set
# CONFIG_SENSORS_NZXT_SMART2 is not set
# CONFIG_SENSORS_OCC_P8_I2C is not set
# CONFIG_SENSORS_OXP is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SBTSI is not set
# CONFIG_SENSORS_SBRMI is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHT3x is not set
# CONFIG_SENSORS_SHT4x is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC2305 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_STTS751 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_INA238 is not set
# CONFIG_SENSORS_INA3221 is not set
# CONFIG_SENSORS_TC74 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP108 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_TMP464 is not set
# CONFIG_SENSORS_TMP513 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83773G is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ASUS_WMI is not set
# CONFIG_SENSORS_ASUS_EC is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_NETLINK=y
# CONFIG_THERMAL_STATISTICS is not set
CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
CONFIG_THERMAL_WRITABLE_TRIPS=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
CONFIG_THERMAL_GOV_USER_SPACE=y
# CONFIG_THERMAL_EMULATION is not set

#
# Intel thermal drivers
#
# CONFIG_INTEL_SOC_DTS_THERMAL is not set

#
# ACPI INT340X thermal drivers
#
# CONFIG_INT340X_THERMAL is not set
# end of ACPI INT340X thermal drivers

# CONFIG_INTEL_PCH_THERMAL is not set
# CONFIG_INTEL_TCC_COOLING is not set
# CONFIG_INTEL_MENLOW is not set
# end of Intel thermal drivers

# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_AS3711 is not set
# CONFIG_MFD_SMPRO is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_BD9571MWV is not set
# CONFIG_MFD_AXP20X_I2C is not set
# CONFIG_MFD_MADERA is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9062 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DA9150 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_MFD_MP2629 is not set
# CONFIG_MFD_INTEL_QUARK_I2C_GPIO is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_MFD_INTEL_LPSS_ACPI is not set
# CONFIG_MFD_INTEL_LPSS_PCI is not set
# CONFIG_MFD_INTEL_PMC_BXT is not set
# CONFIG_MFD_IQS62X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX77843 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MT6360 is not set
# CONFIG_MFD_MT6370 is not set
# CONFIG_MFD_MT6397 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_SY7636A is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RT4831 is not set
# CONFIG_MFD_RT5033 is not set
# CONFIG_MFD_RT5120 is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SKY81452 is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_TI_LMU is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65086 is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TI_LP873X is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS65912_I2C is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TQMX86 is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_MFD_ATC260X_I2C is not set
# end of Multifunction device drivers

# CONFIG_REGULATOR is not set
# CONFIG_RC_CORE is not set
CONFIG_CEC_CORE=m
CONFIG_CEC_NOTIFIER=y

#
# CEC support
#
CONFIG_MEDIA_CEC_SUPPORT=y
# CONFIG_CEC_CH7322 is not set
CONFIG_CEC_SECO=m
CONFIG_USB_PULSE8_CEC=m
CONFIG_USB_RAINSHADOW_CEC=m
# end of CEC support

# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_APERTURE_HELPERS=y
CONFIG_VIDEO_NOMODESET=y
# CONFIG_AGP is not set
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set
CONFIG_DRM_DEBUG_MODESET_LOCK=y
CONFIG_DRM_FBDEV_EMULATION=y
CONFIG_DRM_FBDEV_OVERALLOC=100
# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_DISPLAY_HELPER=m
CONFIG_DRM_DISPLAY_DP_HELPER=y
# CONFIG_DRM_DP_AUX_CHARDEV is not set
# CONFIG_DRM_DP_CEC is not set
CONFIG_DRM_TTM=m
CONFIG_DRM_TTM_HELPER=m
CONFIG_DRM_GEM_SHMEM_HELPER=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_I2C_NXP_TDA9950 is not set
# end of I2C encoder or helper chips

#
# ARM devices
#
# end of ARM devices

CONFIG_DRM_RADEON=m
CONFIG_DRM_RADEON_USERPTR=y
# CONFIG_DRM_AMDGPU is not set
# CONFIG_DRM_NOUVEAU is not set
# CONFIG_DRM_I915 is not set
CONFIG_DRM_VGEM=m
# CONFIG_DRM_VKMS is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_QXL is not set
CONFIG_DRM_PANEL=y

#
# Display Panels
#
# end of Display Panels

CONFIG_DRM_BRIDGE=y
CONFIG_DRM_PANEL_BRIDGE=y

#
# Display Interface Bridges
#
# CONFIG_DRM_ANALOGIX_ANX78XX is not set
# end of Display Interface Bridges

# CONFIG_DRM_ETNAVIV is not set
# CONFIG_DRM_BOCHS is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_GM12U320 is not set
# CONFIG_DRM_SIMPLEDRM is not set
# CONFIG_DRM_VBOXVIDEO is not set
# CONFIG_DRM_GUD is not set
# CONFIG_DRM_SSD130X is not set
# CONFIG_DRM_LEGACY is not set
CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=m

#
# Frame buffer Devices
#
CONFIG_FB_CMDLINE=y
CONFIG_FB_NOTIFY=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SYS_FILLRECT=m
CONFIG_FB_SYS_COPYAREA=m
CONFIG_FB_SYS_IMAGEBLIT=m
# CONFIG_FB_FOREIGN_ENDIAN is not set
CONFIG_FB_SYS_FOPS=m
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
CONFIG_FB_SIMPLE=y
# CONFIG_FB_SM712 is not set
# end of Frame buffer Devices

#
# Backlight & LCD device support
#
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_KTZ8866 is not set
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_QCOM_WLED is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LV5207LP is not set
# CONFIG_BACKLIGHT_BD6107 is not set
# CONFIG_BACKLIGHT_ARCXCNN is not set
# end of Backlight & LCD device support

CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_LEGACY_ACCELERATION is not set
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set
# end of Console display driver support

# CONFIG_LOGO is not set
# end of Graphics support

# CONFIG_DRM_ACCEL is not set
CONFIG_SOUND=m
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_SEQ_DEVICE=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_JACK=y
CONFIG_SND_JACK_INPUT_DEV=y
# CONFIG_SND_OSSEMUL is not set
CONFIG_SND_PCM_TIMER=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_MAX_CARDS=4
# CONFIG_SND_SUPPORT_OLD_API is not set
CONFIG_SND_PROC_FS=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_CTL_FAST_LOOKUP is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_CTL_INPUT_VALIDATION=y
CONFIG_SND_VMASTER=y
CONFIG_SND_DMA_SGBUF=y
CONFIG_SND_CTL_LED=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_SEQ_MIDI_EVENT=m
CONFIG_SND_SEQ_MIDI=m
CONFIG_SND_SEQ_VIRMIDI=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
CONFIG_SND_ALOOP=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
CONFIG_SND_MPU401=m
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SE6X is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
CONFIG_SND_HDA=m
CONFIG_SND_HDA_GENERIC_LEDS=y
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_RECONFIG=y
# CONFIG_SND_HDA_INPUT_BEEP is not set
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=m
# CONFIG_SND_HDA_CODEC_ANALOG is not set
# CONFIG_SND_HDA_CODEC_SIGMATEL is not set
# CONFIG_SND_HDA_CODEC_VIA is not set
CONFIG_SND_HDA_CODEC_HDMI=m
# CONFIG_SND_HDA_CODEC_CIRRUS is not set
# CONFIG_SND_HDA_CODEC_CS8409 is not set
# CONFIG_SND_HDA_CODEC_CONEXANT is not set
# CONFIG_SND_HDA_CODEC_CA0110 is not set
# CONFIG_SND_HDA_CODEC_CA0132 is not set
# CONFIG_SND_HDA_CODEC_CMEDIA is not set
# CONFIG_SND_HDA_CODEC_SI3054 is not set
CONFIG_SND_HDA_GENERIC=m
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM is not set
# CONFIG_SND_HDA_CTL_DEV_ID is not set
# end of HD-Audio

CONFIG_SND_HDA_CORE=m
CONFIG_SND_HDA_COMPONENT=y
CONFIG_SND_HDA_PREALLOC_SIZE=0
CONFIG_SND_INTEL_NHLT=y
CONFIG_SND_INTEL_DSP_CONFIG=m
CONFIG_SND_INTEL_SOUNDWIRE_ACPI=m
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
# CONFIG_SND_X86 is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
CONFIG_HID_BATTERY_STRENGTH=y
CONFIG_HIDRAW=y
CONFIG_UHID=m
CONFIG_HID_GENERIC=m

#
# Special HID drivers
#
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_ACCUTOUCH is not set
# CONFIG_HID_ACRUX is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_ASUS is not set
# CONFIG_HID_AUREAL is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_BETOP_FF is not set
# CONFIG_HID_BIGBEN_FF is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CORSAIR is not set
# CONFIG_HID_COUGAR is not set
# CONFIG_HID_MACALLY is not set
# CONFIG_HID_PRODIKEYS is not set
# CONFIG_HID_CMEDIA is not set
# CONFIG_HID_CREATIVE_SB0540 is not set
# CONFIG_HID_CYPRESS is not set
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELAN is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
# CONFIG_HID_EVISION is not set
# CONFIG_HID_EZKEY is not set
# CONFIG_HID_FT260 is not set
# CONFIG_HID_GEMBIRD is not set
# CONFIG_HID_GFRM is not set
# CONFIG_HID_GLORIOUS is not set
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_VIVALDI is not set
# CONFIG_HID_GT683R is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
# CONFIG_HID_VIEWSONIC is not set
# CONFIG_HID_VRC2 is not set
# CONFIG_HID_XIAOMI is not set
# CONFIG_HID_GYRATION is not set
# CONFIG_HID_ICADE is not set
# CONFIG_HID_ITE is not set
# CONFIG_HID_JABRA is not set
# CONFIG_HID_TWINHAN is not set
# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LED is not set
# CONFIG_HID_LENOVO is not set
# CONFIG_HID_LETSKETCH is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MAGICMOUSE is not set
# CONFIG_HID_MALTRON is not set
# CONFIG_HID_MAYFLASH is not set
# CONFIG_HID_MEGAWORLD_FF is not set
# CONFIG_HID_REDRAGON is not set
CONFIG_HID_MICROSOFT=m
# CONFIG_HID_MONTEREY is not set
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NINTENDO=m
# CONFIG_NINTENDO_FF is not set
# CONFIG_HID_NTI is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PENMOUNT is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PLANTRONICS is not set
# CONFIG_HID_PXRC is not set
# CONFIG_HID_RAZER is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_RETRODE is not set
CONFIG_HID_ROCCAT=m
# CONFIG_HID_SAITEK is not set
# CONFIG_HID_SAMSUNG is not set
# CONFIG_HID_SEMITEK is not set
# CONFIG_HID_SIGMAMICRO is not set
CONFIG_HID_SONY=m
# CONFIG_SONY_FF is not set
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEAM is not set
# CONFIG_HID_STEELSERIES is not set
# CONFIG_HID_SUNPLUS is not set
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_TOPRE is not set
# CONFIG_HID_THINGM is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_UDRAW_PS3 is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_WIIMOTE is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
# CONFIG_HID_ALPS is not set
# CONFIG_HID_MCP2221 is not set
# end of Special HID drivers

#
# HID-BPF support
#
# end of HID-BPF support

#
# USB HID support
#
CONFIG_USB_HID=m
CONFIG_HID_PID=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# end of USB HID Boot Protocol drivers
# end of USB HID support

CONFIG_I2C_HID=m
# CONFIG_I2C_HID_ACPI is not set

#
# Intel ISH HID support
#
# CONFIG_INTEL_ISH_HID is not set
# end of Intel ISH HID support

#
# AMD SFH HID Support
#
# CONFIG_AMD_SFH_HID is not set
# end of AMD SFH HID Support

CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
# CONFIG_USB_LED_TRIG is not set
CONFIG_USB_ULPI_BUS=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
CONFIG_USB_PCI=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_FEW_INIT_RETRIES is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_PRODUCTLIST is not set
# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set
# CONFIG_USB_LEDS_TRIGGER_USBPORT is not set
CONFIG_USB_AUTOSUSPEND_DELAY=2
CONFIG_USB_MON=m

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_XHCI_HCD=m
# CONFIG_USB_XHCI_DBGCAP is not set
CONFIG_USB_XHCI_PCI=m
# CONFIG_USB_XHCI_PCI_RENESAS is not set
# CONFIG_USB_XHCI_PLATFORM is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
# CONFIG_USB_EHCI_FSL is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_REALTEK=m
CONFIG_REALTEK_AUTOPM=y
CONFIG_USB_STORAGE_DATAFAB=m
CONFIG_USB_STORAGE_FREECOM=m
CONFIG_USB_STORAGE_ISD200=m
CONFIG_USB_STORAGE_USBAT=m
CONFIG_USB_STORAGE_SDDR09=m
CONFIG_USB_STORAGE_SDDR55=m
CONFIG_USB_STORAGE_JUMPSHOT=m
CONFIG_USB_STORAGE_ALAUDA=m
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
CONFIG_USB_STORAGE_CYPRESS_ATACB=m
CONFIG_USB_STORAGE_ENE_UB6250=m
CONFIG_USB_UAS=m

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set

#
# USB dual-mode controller drivers
#
# CONFIG_USB_CDNS_SUPPORT is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set
# CONFIG_USB_ISP1760 is not set

#
# USB port drivers
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
# CONFIG_USB_SERIAL_SIMPLE is not set
# CONFIG_USB_SERIAL_AIRCABLE is not set
# CONFIG_USB_SERIAL_ARK3116 is not set
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
# CONFIG_USB_SERIAL_F81232 is not set
# CONFIG_USB_SERIAL_F8153X is not set
# CONFIG_USB_SERIAL_GARMIN is not set
# CONFIG_USB_SERIAL_IPW is not set
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
# CONFIG_USB_SERIAL_METRO is not set
# CONFIG_USB_SERIAL_MOS7720 is not set
# CONFIG_USB_SERIAL_MOS7840 is not set
# CONFIG_USB_SERIAL_MXUPORT is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_QCAUX is not set
# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_XSENS_MT is not set
# CONFIG_USB_SERIAL_WISHBONE is not set
# CONFIG_USB_SERIAL_SSU100 is not set
# CONFIG_USB_SERIAL_QT2 is not set
# CONFIG_USB_SERIAL_UPD78F0730 is not set
# CONFIG_USB_SERIAL_XR is not set
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_APPLE_MFI_FASTCHARGE is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HUB_USB251XB is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_HSIC_USB4604 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set

#
# USB Physical Layer drivers
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# end of USB Physical Layer drivers

# CONFIG_USB_GADGET is not set
# CONFIG_TYPEC is not set
# CONFIG_USB_ROLE_SWITCH is not set
# CONFIG_MMC is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
# CONFIG_LEDS_CLASS_FLASH is not set
# CONFIG_LEDS_CLASS_MULTICOLOR is not set
# CONFIG_LEDS_BRIGHTNESS_HW_CHANGED is not set

#
# LED drivers
#
# CONFIG_LEDS_APU is not set
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3532 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP50XX is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA963X is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_TLC591XX is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_IS31FL319X is not set

#
# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM)
#
# CONFIG_LEDS_BLINKM is not set
# CONFIG_LEDS_MLXCPLD is not set
# CONFIG_LEDS_MLXREG is not set
# CONFIG_LEDS_USER is not set
# CONFIG_LEDS_NIC78BX is not set
# CONFIG_LEDS_TI_LMU_COMMON is not set

#
# Flash and Torch LED drivers
#

#
# RGB LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_ACTIVITY is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set

#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_LEDS_TRIGGER_CAMERA is not set
# CONFIG_LEDS_TRIGGER_PANIC is not set
# CONFIG_LEDS_TRIGGER_NETDEV is not set
# CONFIG_LEDS_TRIGGER_PATTERN is not set
CONFIG_LEDS_TRIGGER_AUDIO=m
# CONFIG_LEDS_TRIGGER_TTY is not set

#
# Simple LED drivers
#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC_ATOMIC_SCRUB=y
CONFIG_EDAC_SUPPORT=y
CONFIG_EDAC=y
# CONFIG_EDAC_LEGACY_SYSFS is not set
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_DECODE_MCE=y
# CONFIG_EDAC_AMD64 is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82975X is not set
# CONFIG_EDAC_I3000 is not set
# CONFIG_EDAC_I3200 is not set
# CONFIG_EDAC_IE31200 is not set
# CONFIG_EDAC_X38 is not set
# CONFIG_EDAC_I5400 is not set
# CONFIG_EDAC_I5100 is not set
# CONFIG_EDAC_I7300 is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_MC146818_LIB=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_SYSTOHC=y
CONFIG_RTC_SYSTOHC_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
# CONFIG_RTC_NVMEM is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
# CONFIG_RTC_DRV_ABB5ZES3 is not set
# CONFIG_RTC_DRV_ABEOZ9 is not set
# CONFIG_RTC_DRV_ABX80X is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1374 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_ISL12022 is not set
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_PCF8523 is not set
# CONFIG_RTC_DRV_PCF85063 is not set
# CONFIG_RTC_DRV_PCF85363 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_BQ32K is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
# CONFIG_RTC_DRV_RX8010 is not set
# CONFIG_RTC_DRV_RX8581 is not set
# CONFIG_RTC_DRV_RX8025 is not set
# CONFIG_RTC_DRV_EM3027 is not set
# CONFIG_RTC_DRV_RV3028 is not set
# CONFIG_RTC_DRV_RV3032 is not set
# CONFIG_RTC_DRV_RV8803 is not set
# CONFIG_RTC_DRV_SD3078 is not set

#
# SPI RTC drivers
#
CONFIG_RTC_I2C_AND_SPI=y

#
# SPI and I2C RTC drivers
#
# CONFIG_RTC_DRV_DS3232 is not set
# CONFIG_RTC_DRV_PCF2127 is not set
# CONFIG_RTC_DRV_RV3029C2 is not set
# CONFIG_RTC_DRV_RX6110 is not set

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1685_FAMILY is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_DS2404 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_MSM6242 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_RP5C01 is not set

#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_FTRTC010 is not set

#
# HID Sensor RTC drivers
#
# CONFIG_RTC_DRV_GOLDFISH is not set
# CONFIG_DMADEVICES is not set

#
# DMABUF options
#
CONFIG_SYNC_FILE=y
# CONFIG_SW_SYNC is not set
CONFIG_UDMABUF=y
# CONFIG_DMABUF_MOVE_NOTIFY is not set
# CONFIG_DMABUF_DEBUG is not set
# CONFIG_DMABUF_SELFTESTS is not set
CONFIG_DMABUF_HEAPS=y
# CONFIG_DMABUF_SYSFS_STATS is not set
CONFIG_DMABUF_HEAPS_SYSTEM=y
# end of DMABUF options

# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_VIRTIO_MENU is not set
# CONFIG_VDPA is not set
# CONFIG_VHOST_MENU is not set

#
# Microsoft Hyper-V guest support
#
# end of Microsoft Hyper-V guest support

# CONFIG_GREYBUS is not set
# CONFIG_COMEDI is not set
# CONFIG_STAGING is not set
# CONFIG_CHROME_PLATFORMS is not set
# CONFIG_MELLANOX_PLATFORM is not set
# CONFIG_SURFACE_PLATFORMS is not set
CONFIG_X86_PLATFORM_DEVICES=y
CONFIG_ACPI_WMI=m
# CONFIG_WMI_BMOF is not set
# CONFIG_MXM_WMI is not set
# CONFIG_PEAQ_WMI is not set
# CONFIG_NVIDIA_WMI_EC_BACKLIGHT is not set
# CONFIG_XIAOMI_WMI is not set
# CONFIG_GIGABYTE_WMI is not set
# CONFIG_YOGABOOK_WMI is not set
# CONFIG_ACERHDF is not set
# CONFIG_ACER_WIRELESS is not set
# CONFIG_AMD_PMF is not set
# CONFIG_AMD_PMC is not set
# CONFIG_AMD_HSMP is not set
# CONFIG_ADV_SWBUTTON is not set
# CONFIG_APPLE_GMUX is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_ASUS_WIRELESS is not set
# CONFIG_X86_PLATFORM_DRIVERS_DELL is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_GPD_POCKET_FAN is not set
# CONFIG_X86_PLATFORM_DRIVERS_HP is not set
# CONFIG_WIRELESS_HOTKEY is not set
# CONFIG_IBM_RTL is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_THINKPAD_LMI is not set
# CONFIG_INTEL_SAR_INT1092 is not set
# CONFIG_INTEL_PMC_CORE is not set

#
# Intel Speed Select Technology interface support
#
# CONFIG_INTEL_SPEED_SELECT_INTERFACE is not set
# end of Intel Speed Select Technology interface support

# CONFIG_INTEL_WMI_SBL_FW_UPDATE is not set
# CONFIG_INTEL_WMI_THUNDERBOLT is not set

#
# Intel Uncore Frequency Control
#
# CONFIG_INTEL_UNCORE_FREQ_CONTROL is not set
# end of Intel Uncore Frequency Control

# CONFIG_INTEL_HID_EVENT is not set
# CONFIG_INTEL_VBTN is not set
# CONFIG_INTEL_OAKTRAIL is not set
# CONFIG_INTEL_PUNIT_IPC is not set
# CONFIG_INTEL_RST is not set
# CONFIG_INTEL_SMARTCONNECT is not set
# CONFIG_INTEL_VSEC is not set
# CONFIG_MSI_WMI is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_TOSHIBA_HAPS is not set
# CONFIG_TOSHIBA_WMI is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_MLX_PLATFORM is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_INTEL_SCU_PCI is not set
# CONFIG_INTEL_SCU_PLATFORM is not set
# CONFIG_SIEMENS_SIMATIC_IPC is not set
# CONFIG_WINMATE_FM07_KEYS is not set
# CONFIG_P2SB is not set
CONFIG_HAVE_CLK=y
CONFIG_HAVE_CLK_PREPARE=y
CONFIG_COMMON_CLK=y
# CONFIG_COMMON_CLK_MAX9485 is not set
# CONFIG_COMMON_CLK_SI5341 is not set
# CONFIG_COMMON_CLK_SI5351 is not set
# CONFIG_COMMON_CLK_SI544 is not set
# CONFIG_COMMON_CLK_CDCE706 is not set
# CONFIG_COMMON_CLK_CS2000_CP is not set
# CONFIG_XILINX_VCU is not set
# CONFIG_HWSPINLOCK is not set

#
# Clock Source drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_CLKBLD_I8253=y
# end of Clock Source drivers

# CONFIG_MAILBOX is not set
CONFIG_IOMMU_IOVA=y
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y

#
# Generic IOMMU Pagetable Support
#
CONFIG_IOMMU_IO_PGTABLE=y
# end of Generic IOMMU Pagetable Support

# CONFIG_IOMMU_DEBUGFS is not set
# CONFIG_IOMMU_DEFAULT_DMA_STRICT is not set
CONFIG_IOMMU_DEFAULT_DMA_LAZY=y
# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set
CONFIG_IOMMU_DMA=y
CONFIG_AMD_IOMMU=y
# CONFIG_AMD_IOMMU_V2 is not set
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IOMMUFD is not set
# CONFIG_IRQ_REMAP is not set

#
# Remoteproc drivers
#
# CONFIG_REMOTEPROC is not set
# end of Remoteproc drivers

#
# Rpmsg drivers
#
# CONFIG_RPMSG_VIRTIO is not set
# end of Rpmsg drivers

# CONFIG_SOUNDWIRE is not set

#
# SOC (System On Chip) specific Drivers
#

#
# Amlogic SoC drivers
#
# end of Amlogic SoC drivers

#
# Broadcom SoC drivers
#
# end of Broadcom SoC drivers

#
# NXP/Freescale QorIQ SoC drivers
#
# end of NXP/Freescale QorIQ SoC drivers

#
# fujitsu SoC drivers
#
# end of fujitsu SoC drivers

#
# i.MX SoC drivers
#
# end of i.MX SoC drivers

#
# Enable LiteX SoC Builder specific drivers
#
# end of Enable LiteX SoC Builder specific drivers

# CONFIG_WPCM450_SOC is not set

#
# Qualcomm SoC drivers
#
# end of Qualcomm SoC drivers

# CONFIG_SOC_TI is not set

#
# Xilinx SoC drivers
#
# end of Xilinx SoC drivers
# end of SOC (System On Chip) specific Drivers

# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_NTB is not set
# CONFIG_PWM is not set

#
# IRQ chip support
#
# end of IRQ chip support

# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_USB_LGM_PHY is not set
# CONFIG_PHY_CAN_TRANSCEIVER is not set

#
# PHY drivers for Broadcom platforms
#
# CONFIG_BCM_KONA_USB2_PHY is not set
# end of PHY drivers for Broadcom platforms

# CONFIG_PHY_PXA_28NM_HSIC is not set
# CONFIG_PHY_PXA_28NM_USB2 is not set
# CONFIG_PHY_QCOM_USB_HS is not set
# CONFIG_PHY_QCOM_USB_HSIC is not set
# CONFIG_PHY_TUSB1210 is not set
# CONFIG_PHY_INTEL_LGM_EMMC is not set
# end of PHY Subsystem

# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set

#
# Performance monitor support
#
# end of Performance monitor support

CONFIG_RAS=y
# CONFIG_RAS_CEC is not set
# CONFIG_USB4 is not set

#
# Android
#
# CONFIG_ANDROID_BINDER_IPC is not set
# end of Android

# CONFIG_LIBNVDIMM is not set
# CONFIG_DAX is not set
# CONFIG_NVMEM is not set

#
# HW tracing support
#
# CONFIG_STM is not set
# CONFIG_INTEL_TH is not set
# end of HW tracing support

# CONFIG_FPGA is not set
# CONFIG_TEE is not set
# CONFIG_SIOX is not set
# CONFIG_SLIMBUS is not set
# CONFIG_INTERCONNECT is not set
# CONFIG_COUNTER is not set
# CONFIG_MOST is not set
# CONFIG_PECI is not set
# CONFIG_HTE is not set
# end of Device Drivers

#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
# CONFIG_VALIDATE_FS_PARSER is not set
CONFIG_FS_IOMAP=y
CONFIG_LEGACY_DIRECT_IO=y
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
CONFIG_EXT4_FS=y
CONFIG_EXT4_USE_FOR_EXT2=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
# CONFIG_EXT4_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=m
# CONFIG_XFS_SUPPORT_V4 is not set
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_XFS_ONLINE_SCRUB is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set
# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set
# CONFIG_BTRFS_DEBUG is not set
# CONFIG_BTRFS_ASSERT is not set
# CONFIG_BTRFS_FS_REF_VERIFY is not set
# CONFIG_NILFS2_FS is not set
CONFIG_F2FS_FS=m
# CONFIG_F2FS_STAT_FS is not set
CONFIG_F2FS_FS_XATTR=y
CONFIG_F2FS_FS_POSIX_ACL=y
# CONFIG_F2FS_FS_SECURITY is not set
# CONFIG_F2FS_CHECK_FS is not set
# CONFIG_F2FS_FAULT_INJECTION is not set
CONFIG_F2FS_FS_COMPRESSION=y
CONFIG_F2FS_FS_LZO=y
CONFIG_F2FS_FS_LZORLE=y
# CONFIG_F2FS_FS_LZ4 is not set
CONFIG_F2FS_FS_ZSTD=y
# CONFIG_F2FS_IOSTAT is not set
# CONFIG_F2FS_UNFAIR_RWSEM is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_EXPORTFS_BLOCK_OPS=y
CONFIG_FILE_LOCKING=y
# CONFIG_FS_ENCRYPTION is not set
# CONFIG_FS_VERITY is not set
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_FANOTIFY=y
# CONFIG_FANOTIFY_ACCESS_PERMISSIONS is not set
# CONFIG_QUOTA is not set
CONFIG_AUTOFS4_FS=y
CONFIG_AUTOFS_FS=y
CONFIG_FUSE_FS=m
CONFIG_CUSE=m
# CONFIG_VIRTIO_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
CONFIG_NETFS_SUPPORT=m
# CONFIG_NETFS_STATS is not set
# CONFIG_FSCACHE is not set
# end of Caches

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
# end of CD-ROM/DVD Filesystems

#
# DOS/FAT/EXFAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-15"
CONFIG_FAT_DEFAULT_UTF8=y
CONFIG_EXFAT_FS=m
CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8"
# CONFIG_NTFS_FS is not set
CONFIG_NTFS3_FS=m
# CONFIG_NTFS3_64BIT_CLUSTER is not set
CONFIG_NTFS3_LZX_XPRESS=y
# CONFIG_NTFS3_FS_POSIX_ACL is not set
# end of DOS/FAT/EXFAT/NT Filesystems

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_PROC_CHILDREN=y
CONFIG_PROC_PID_ARCH_STATUS=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
# CONFIG_TMPFS_INODE64 is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP=y
CONFIG_HUGETLB_PAGE_OPTIMIZE_VMEMMAP_DEFAULT_ON=y
CONFIG_MEMFD_CREATE=y
CONFIG_ARCH_HAS_GIGANTIC_PAGE=y
CONFIG_CONFIGFS_FS=m
CONFIG_EFIVAR_FS=m
# end of Pseudo filesystems

CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ORANGEFS_FS is not set
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
# CONFIG_ECRYPT_FS is not set
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
CONFIG_SQUASHFS=m
CONFIG_SQUASHFS_FILE_CACHE=y
# CONFIG_SQUASHFS_FILE_DIRECT is not set
CONFIG_SQUASHFS_DECOMP_SINGLE=y
CONFIG_SQUASHFS_DECOMP_MULTI=y
CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU=y
CONFIG_SQUASHFS_CHOICE_DECOMP_BY_MOUNT=y
CONFIG_SQUASHFS_MOUNT_DECOMP_THREADS=y
CONFIG_SQUASHFS_XATTR=y
CONFIG_SQUASHFS_ZLIB=y
# CONFIG_SQUASHFS_LZ4 is not set
# CONFIG_SQUASHFS_LZO is not set
CONFIG_SQUASHFS_XZ=y
# CONFIG_SQUASHFS_ZSTD is not set
# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set
# CONFIG_SQUASHFS_EMBEDDED is not set
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_EROFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
# CONFIG_NFS_V2 is not set
# CONFIG_NFS_V3 is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
CONFIG_NFS_V4_1=y
CONFIG_NFS_V4_2=y
CONFIG_PNFS_FILE_LAYOUT=m
CONFIG_PNFS_BLOCK=m
CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org"
# CONFIG_NFS_V4_1_MIGRATION is not set
CONFIG_NFS_V4_SECURITY_LABEL=y
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFS_DEBUG=y
CONFIG_NFS_DISABLE_UDP_SUPPORT=y
# CONFIG_NFS_V4_2_READ_PLUS is not set
CONFIG_NFSD=m
# CONFIG_NFSD_V2 is not set
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_PNFS=y
CONFIG_NFSD_BLOCKLAYOUT=y
CONFIG_NFSD_SCSILAYOUT=y
# CONFIG_NFSD_FLEXFILELAYOUT is not set
CONFIG_NFSD_V4_2_INTER_SSC=y
# CONFIG_NFSD_V4_SECURITY_LABEL is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_NFS_V4_2_SSC_HELPER=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BACKCHANNEL=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
CONFIG_SUNRPC_DEBUG=y
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS2 is not set
CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y
# CONFIG_CIFS_UPCALL is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DEBUG_DUMP_KEYS is not set
CONFIG_CIFS_DFS_UPCALL=y
CONFIG_CIFS_SWN_UPCALL=y
# CONFIG_SMB_SERVER is not set
CONFIG_SMBFS_COMMON=m
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
CONFIG_NLS_CODEPAGE_850=m
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_MAC_ROMAN=m
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
# CONFIG_UNICODE is not set
CONFIG_IO_WQ=y
# end of File systems

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_REQUEST_CACHE=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_TRUSTED_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
CONFIG_KEY_DH_OPERATIONS=y
CONFIG_KEY_NOTIFICATIONS=y
# CONFIG_SECURITY_DMESG_RESTRICT is not set
CONFIG_SECURITY=y
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_NETWORK is not set
# CONFIG_SECURITY_PATH is not set
CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y
CONFIG_HARDENED_USERCOPY=y
CONFIG_FORTIFY_SOURCE=y
# CONFIG_STATIC_USERMODEHELPER is not set
# CONFIG_SECURITY_SMACK is not set
# CONFIG_SECURITY_TOMOYO is not set
# CONFIG_SECURITY_APPARMOR is not set
# CONFIG_SECURITY_LOADPIN is not set
CONFIG_SECURITY_YAMA=y
# CONFIG_SECURITY_SAFESETID is not set
# CONFIG_SECURITY_LOCKDOWN_LSM is not set
# CONFIG_SECURITY_LANDLOCK is not set
# CONFIG_INTEGRITY is not set
# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_LSM="yama,loadpin,safesetid,integrity"

#
# Kernel hardening options
#

#
# Memory initialization
#
CONFIG_CC_HAS_AUTO_VAR_INIT_PATTERN=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO_ENABLER=y
CONFIG_CC_HAS_AUTO_VAR_INIT_ZERO=y
# CONFIG_INIT_STACK_NONE is not set
CONFIG_INIT_STACK_ALL_PATTERN=y
# CONFIG_INIT_STACK_ALL_ZERO is not set
# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set
# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set
CONFIG_CC_HAS_ZERO_CALL_USED_REGS=y
CONFIG_ZERO_CALL_USED_REGS=y
# end of Memory initialization

CONFIG_RANDSTRUCT_NONE=y
# end of Kernel hardening options
# end of Security options

CONFIG_XOR_BLOCKS=y
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_SKCIPHER=m
CONFIG_CRYPTO_SKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_RNG_DEFAULT=m
CONFIG_CRYPTO_AKCIPHER2=y
CONFIG_CRYPTO_AKCIPHER=y
CONFIG_CRYPTO_KPP2=y
CONFIG_CRYPTO_KPP=y
CONFIG_CRYPTO_ACOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_USER=m
# CONFIG_CRYPTO_MANAGER_DISABLE_TESTS is not set
# CONFIG_CRYPTO_MANAGER_EXTRA_TESTS is not set
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_NULL2=y
CONFIG_CRYPTO_PCRYPT=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
CONFIG_CRYPTO_SIMD=m
# end of Crypto core or helper

#
# Public-key cryptography
#
CONFIG_CRYPTO_RSA=y
CONFIG_CRYPTO_DH=y
# CONFIG_CRYPTO_DH_RFC7919_GROUPS is not set
CONFIG_CRYPTO_ECC=m
CONFIG_CRYPTO_ECDH=m
# CONFIG_CRYPTO_ECDSA is not set
# CONFIG_CRYPTO_ECRDSA is not set
# CONFIG_CRYPTO_SM2 is not set
# CONFIG_CRYPTO_CURVE25519 is not set
# end of Public-key cryptography

#
# Block ciphers
#
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_TI is not set
# CONFIG_CRYPTO_ARIA is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_SM4_GENERIC is not set
# CONFIG_CRYPTO_TWOFISH is not set
# end of Block ciphers

#
# Length-preserving ciphers and modes
#
CONFIG_CRYPTO_ADIANTUM=m
CONFIG_CRYPTO_CHACHA20=m
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CFB is not set
CONFIG_CRYPTO_CTR=m
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_HCTR2 is not set
# CONFIG_CRYPTO_KEYWRAP is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_OFB is not set
# CONFIG_CRYPTO_PCBC is not set
CONFIG_CRYPTO_XTS=m
CONFIG_CRYPTO_NHPOLY1305=m
# end of Length-preserving ciphers and modes

#
# AEAD (authenticated encryption with associated data) ciphers
#
# CONFIG_CRYPTO_AEGIS128 is not set
CONFIG_CRYPTO_CHACHA20POLY1305=m
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_ECHAINIV=m
CONFIG_CRYPTO_ESSIV=m
# end of AEAD (authenticated encryption with associated data) ciphers

#
# Hashes, digests, and MACs
#
CONFIG_CRYPTO_BLAKE2B=y
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
# CONFIG_CRYPTO_MICHAEL_MIC is not set
CONFIG_CRYPTO_POLY1305=m
# CONFIG_CRYPTO_RMD160 is not set
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
# CONFIG_CRYPTO_SHA3 is not set
# CONFIG_CRYPTO_SM3_GENERIC is not set
# CONFIG_CRYPTO_STREEBOG is not set
# CONFIG_CRYPTO_VMAC is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_XXHASH=y
# end of Hashes, digests, and MACs

#
# CRCs (cyclic redundancy checks)
#
CONFIG_CRYPTO_CRC32C=y
CONFIG_CRYPTO_CRC32=m
CONFIG_CRYPTO_CRCT10DIF=y
CONFIG_CRYPTO_CRC64_ROCKSOFT=y
# end of CRCs (cyclic redundancy checks)

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_842 is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set
CONFIG_CRYPTO_ZSTD=y
# end of Compression

#
# Random number generation
#
CONFIG_CRYPTO_ANSI_CPRNG=m
CONFIG_CRYPTO_DRBG_MENU=m
CONFIG_CRYPTO_DRBG_HMAC=y
CONFIG_CRYPTO_DRBG_HASH=y
CONFIG_CRYPTO_DRBG_CTR=y
CONFIG_CRYPTO_DRBG=m
CONFIG_CRYPTO_JITTERENTROPY=m
CONFIG_CRYPTO_KDF800108_CTR=y
# end of Random number generation

#
# Userspace interface
#
CONFIG_CRYPTO_USER_API=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=m
CONFIG_CRYPTO_USER_API_RNG=m
# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set
CONFIG_CRYPTO_USER_API_AEAD=m
# CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE is not set
# CONFIG_CRYPTO_STATS is not set
# end of Userspace interface

CONFIG_CRYPTO_HASH_INFO=y

#
# Accelerated Cryptographic Algorithms for CPU (x86)
#
CONFIG_CRYPTO_CURVE25519_X86=m
CONFIG_CRYPTO_AES_NI_INTEL=m
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAMELLIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES3_EDE_X86_64=m
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX2_X86_64 is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_SM4_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
# CONFIG_CRYPTO_ARIA_AESNI_AVX_X86_64 is not set
# CONFIG_CRYPTO_ARIA_AESNI_AVX2_X86_64 is not set
# CONFIG_CRYPTO_ARIA_GFNI_AVX512_X86_64 is not set
CONFIG_CRYPTO_CHACHA20_X86_64=m
# CONFIG_CRYPTO_AEGIS128_AESNI_SSE2 is not set
CONFIG_CRYPTO_NHPOLY1305_SSE2=m
# CONFIG_CRYPTO_NHPOLY1305_AVX2 is not set
CONFIG_CRYPTO_BLAKE2S_X86=y
# CONFIG_CRYPTO_POLYVAL_CLMUL_NI is not set
CONFIG_CRYPTO_POLY1305_X86_64=m
CONFIG_CRYPTO_SHA1_SSSE3=m
CONFIG_CRYPTO_SHA256_SSSE3=m
CONFIG_CRYPTO_SHA512_SSSE3=m
# CONFIG_CRYPTO_SM3_AVX_X86_64 is not set
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
CONFIG_CRYPTO_CRC32C_INTEL=y
CONFIG_CRYPTO_CRC32_PCLMUL=m
CONFIG_CRYPTO_CRCT10DIF_PCLMUL=y
# end of Accelerated Cryptographic Algorithms for CPU (x86)

# CONFIG_CRYPTO_HW is not set
CONFIG_ASYMMETRIC_KEY_TYPE=y
CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y
CONFIG_X509_CERTIFICATE_PARSER=y
CONFIG_PKCS8_PRIVATE_KEY_PARSER=m
CONFIG_PKCS7_MESSAGE_PARSER=y
# CONFIG_PKCS7_TEST_KEY is not set
# CONFIG_SIGNED_PE_FILE_VERIFICATION is not set
# CONFIG_FIPS_SIGNATURE_SELFTEST is not set

#
# Certificates for signature checking
#
CONFIG_SYSTEM_TRUSTED_KEYRING=y
CONFIG_SYSTEM_TRUSTED_KEYS=""
# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set
# CONFIG_SECONDARY_TRUSTED_KEYRING is not set
# CONFIG_SYSTEM_BLACKLIST_KEYRING is not set
# end of Certificates for signature checking

CONFIG_BINARY_PRINTF=y

#
# Library routines
#
CONFIG_RAID6_PQ=y
CONFIG_RAID6_PQ_BENCHMARK=y
# CONFIG_PACKING is not set
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_NET_UTILS=y
# CONFIG_CORDIC is not set
# CONFIG_PRIME_NUMBERS is not set
CONFIG_RATIONAL=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
CONFIG_ARCH_HAS_FAST_MULTIPLIER=y
CONFIG_ARCH_USE_SYM_ANNOTATIONS=y

#
# Crypto library routines
#
CONFIG_CRYPTO_LIB_UTILS=y
CONFIG_CRYPTO_LIB_AES=m
CONFIG_CRYPTO_LIB_ARC4=m
CONFIG_CRYPTO_LIB_GF128MUL=m
CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=y
CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y
CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m
CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m
CONFIG_CRYPTO_LIB_CHACHA=m
CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m
CONFIG_CRYPTO_LIB_CURVE25519=m
CONFIG_CRYPTO_LIB_DES=m
CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11
CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m
CONFIG_CRYPTO_LIB_POLY1305=m
CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m
CONFIG_CRYPTO_LIB_SHA1=y
CONFIG_CRYPTO_LIB_SHA256=y
# end of Crypto library routines

CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_CRC64_ROCKSOFT=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC64=y
# CONFIG_CRC4 is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
CONFIG_XXHASH=y
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_ZSTD_COMMON=y
CONFIG_ZSTD_COMPRESS=y
CONFIG_ZSTD_DECOMPRESS=y
CONFIG_XZ_DEC=m
CONFIG_XZ_DEC_X86=y
# CONFIG_XZ_DEC_POWERPC is not set
# CONFIG_XZ_DEC_IA64 is not set
# CONFIG_XZ_DEC_ARM is not set
# CONFIG_XZ_DEC_ARMTHUMB is not set
# CONFIG_XZ_DEC_SPARC is not set
# CONFIG_XZ_DEC_MICROLZMA is not set
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_XARRAY_MULTI=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_DMA_OPS=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_SWIOTLB=y
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_DMA_MAP_BENCHMARK is not set
CONFIG_SGL_ALLOC=y
CONFIG_FORCE_NR_CPUS=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
CONFIG_CLZ_TAB=y
CONFIG_IRQ_POLL=y
CONFIG_MPILIB=y
CONFIG_OID_REGISTRY=y
CONFIG_UCS2_STRING=y
CONFIG_HAVE_GENERIC_VDSO=y
CONFIG_GENERIC_GETTIMEOFDAY=y
CONFIG_GENERIC_VDSO_TIME_NS=y
CONFIG_FONT_SUPPORT=y
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_SG_POOL=y
CONFIG_ARCH_HAS_PMEM_API=y
CONFIG_ARCH_HAS_CPU_CACHE_INVALIDATE_MEMREGION=y
CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y
CONFIG_ARCH_HAS_COPY_MC=y
CONFIG_ARCH_STACKWALK=y
CONFIG_STACKDEPOT=y
CONFIG_SBITMAP=y
# end of Library routines

#
# Kernel hacking
#

#
# printk and dmesg options
#
CONFIG_PRINTK_TIME=y
# CONFIG_PRINTK_CALLER is not set
# CONFIG_STACKTRACE_BUILD_ID is not set
CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7
CONFIG_CONSOLE_LOGLEVEL_QUIET=4
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DYNAMIC_DEBUG_CORE is not set
CONFIG_SYMBOLIC_ERRNAME=y
CONFIG_DEBUG_BUGVERBOSE=y
# end of printk and dmesg options

CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_MISC is not set

#
# Compile-time checks and compiler options
#
CONFIG_DEBUG_INFO=y
CONFIG_AS_HAS_NON_CONST_LEB128=y
# CONFIG_DEBUG_INFO_NONE is not set
CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
# CONFIG_DEBUG_INFO_DWARF4 is not set
# CONFIG_DEBUG_INFO_DWARF5 is not set
CONFIG_DEBUG_INFO_REDUCED=y
# CONFIG_DEBUG_INFO_COMPRESSED_NONE is not set
CONFIG_DEBUG_INFO_COMPRESSED_ZLIB=y
CONFIG_DEBUG_INFO_SPLIT=y
# CONFIG_GDB_SCRIPTS is not set
CONFIG_FRAME_WARN=2048
CONFIG_STRIP_ASM_SYMS=y
# CONFIG_HEADERS_INSTALL is not set
CONFIG_SECTION_MISMATCH_WARN_ONLY=y
# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B is not set
CONFIG_OBJTOOL=y
# CONFIG_VMLINUX_MAP is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# end of Compile-time checks and compiler options

#
# Generic Kernel Debugging Instruments
#
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_FS_ALLOW_ALL=y
# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set
# CONFIG_DEBUG_FS_ALLOW_NONE is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y
# CONFIG_UBSAN is not set
CONFIG_HAVE_ARCH_KCSAN=y
CONFIG_HAVE_KCSAN_COMPILER=y
# CONFIG_KCSAN is not set
# end of Generic Kernel Debugging Instruments

#
# Networking Debugging
#
# CONFIG_NET_DEV_REFCNT_TRACKER is not set
# CONFIG_NET_NS_REFCNT_TRACKER is not set
# CONFIG_DEBUG_NET is not set
# end of Networking Debugging

#
# Memory Debugging
#
CONFIG_PAGE_EXTENSION=y
CONFIG_DEBUG_PAGEALLOC=y
# CONFIG_DEBUG_PAGEALLOC_ENABLE_DEFAULT is not set
CONFIG_SLUB_DEBUG=y
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_PAGE_TABLE_CHECK=y
CONFIG_PAGE_TABLE_CHECK_ENFORCED=y
CONFIG_PAGE_POISONING=y
CONFIG_DEBUG_RODATA_TEST=y
CONFIG_ARCH_HAS_DEBUG_WX=y
CONFIG_DEBUG_WX=y
CONFIG_GENERIC_PTDUMP=y
CONFIG_PTDUMP_CORE=y
# CONFIG_PTDUMP_DEBUGFS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SHRINKER_DEBUG is not set
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_SCHED_STACK_END_CHECK=y
CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_VM_PGTABLE=y
CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
# CONFIG_DEBUG_VIRTUAL is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y
# CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is not set
CONFIG_HAVE_ARCH_KASAN=y
CONFIG_HAVE_ARCH_KASAN_VMALLOC=y
CONFIG_CC_HAS_KASAN_GENERIC=y
CONFIG_CC_HAS_KASAN_SW_TAGS=y
CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y
# CONFIG_KASAN is not set
CONFIG_HAVE_ARCH_KFENCE=y
CONFIG_KFENCE=y
CONFIG_KFENCE_SAMPLE_INTERVAL=100
CONFIG_KFENCE_NUM_OBJECTS=255
# CONFIG_KFENCE_DEFERRABLE is not set
# CONFIG_KFENCE_STATIC_KEYS is not set
CONFIG_KFENCE_STRESS_TEST_FAULTS=0
CONFIG_HAVE_ARCH_KMSAN=y
CONFIG_HAVE_KMSAN_COMPILER=y
# CONFIG_KMSAN is not set
# end of Memory Debugging

CONFIG_DEBUG_SHIRQ=y

#
# Debug Oops, Lockups and Hangs
#
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=40
CONFIG_LOCKUP_DETECTOR=y
CONFIG_SOFTLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_HARDLOCKUP_DETECTOR_PERF=y
CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y
CONFIG_HARDLOCKUP_DETECTOR=y
# CONFIG_BOOTPARAM_HARDLOCKUP_PANIC is not set
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=40
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_WQ_WATCHDOG=y
# CONFIG_TEST_LOCKUP is not set
# end of Debug Oops, Lockups and Hangs

#
# Scheduler Debugging
#
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHED_INFO=y
# CONFIG_SCHEDSTATS is not set
# end of Scheduler Debugging

# CONFIG_DEBUG_TIMEKEEPING is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
CONFIG_LOCK_DEBUGGING_SUPPORT=y
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set
CONFIG_DEBUG_RWSEMS=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_WW_MUTEX_SELFTEST is not set
# CONFIG_SCF_TORTURE_TEST is not set
CONFIG_CSD_LOCK_WAIT_DEBUG=y
# end of Lock Debugging (spinlocks, mutexes, etc...)

CONFIG_NMI_CHECK_CPU=y
CONFIG_DEBUG_IRQFLAGS=y
CONFIG_STACKTRACE=y
# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set
# CONFIG_DEBUG_KOBJECT is not set

#
# Debug kernel data structures
#
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_PLIST is not set
CONFIG_DEBUG_SG=y
CONFIG_DEBUG_NOTIFIERS=y
CONFIG_BUG_ON_DATA_CORRUPTION=y
CONFIG_DEBUG_MAPLE_TREE=y
# end of Debug kernel data structures

CONFIG_DEBUG_CREDENTIALS=y

#
# RCU Debugging
#
# CONFIG_RCU_SCALE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_REF_SCALE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
CONFIG_RCU_CPU_STALL_CPUTIME=y
# CONFIG_RCU_TRACE is not set
# CONFIG_RCU_EQS_DEBUG is not set
# end of RCU Debugging

# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set
# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
# CONFIG_LATENCYTOP is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_HAVE_RETHOOK=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y
CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y
CONFIG_HAVE_DYNAMIC_FTRACE_NO_PATCHABLE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_OBJTOOL_MCOUNT=y
CONFIG_HAVE_OBJTOOL_NOP_MCOUNT=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_HAVE_BUILDTIME_MCOUNT_SORT=y
CONFIG_TRACING_SUPPORT=y
# CONFIG_FTRACE is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT=y
CONFIG_HAVE_SAMPLE_FTRACE_DIRECT_MULTI=y
CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y
CONFIG_STRICT_DEVMEM=y
CONFIG_IO_STRICT_DEVMEM=y

#
# x86 Debugging
#
CONFIG_X86_VERBOSE_BOOTUP=y
# CONFIG_EARLY_PRINTK is not set
# CONFIG_EFI_PGT_DUMP is not set
# CONFIG_DEBUG_TLBFLUSH is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
# CONFIG_DEBUG_ENTRY is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
# CONFIG_X86_DEBUG_FPU is not set
# CONFIG_PUNIT_ATOM_DEBUG is not set
CONFIG_UNWINDER_ORC=y
# CONFIG_UNWINDER_FRAME_POINTER is not set
# end of x86 Debugging

#
# Kernel Testing and Coverage
#
# CONFIG_KUNIT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_ARCH_HAS_KCOV=y
CONFIG_CC_HAS_SANCOV_TRACE_PC=y
# CONFIG_KCOV is not set
# CONFIG_RUNTIME_TESTING_MENU is not set
CONFIG_ARCH_USE_MEMTEST=y
# CONFIG_MEMTEST is not set
# end of Kernel Testing and Coverage

#
# Rust hacking
#
# end of Rust hacking
# end of Kernel hacking

[-- Attachment #3: dmesg_01.txt --]
[-- Type: text/plain, Size: 65309 bytes --]

[    0.000000] Linux version 6.3.0-rc2-bdver2 (root@outsider) (clang version 15.0.7, LLD 15.0.7) #1 SMP Sat Mar 18 19:41:03 CET 2023
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc2-bdver2 root=/dev/nvme0n1p7 ro psmouse.synaptics_intertouch=1 zswap.max_pool_percent=16 zswap.zpool=z3fold slub_debug=FZP page_poison=1 netconsole=6666@10.0.0.14/eth0,6666@10.0.0.3/70:85:C2:30:EC:01
[    0.000000] KERNEL supported cpus:
[    0.000000]   AMD AuthenticAMD
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce1fefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ce1ff000-0x00000000ce240fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ce241000-0x00000000ce250fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ce251000-0x00000000ce640fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ce641000-0x00000000cf0f1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf0f2000-0x00000000cf155fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000cf156000-0x00000000cf156fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf157000-0x00000000cf35cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf35d000-0x00000000cf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000082effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.3.1 by American Megatrends
[    0.000000] efi: ACPI=0xce249000 ACPI 2.0=0xce249000 SMBIOS=0xf04c0 
[    0.000000] efi: Remove mem44: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[    0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[    0.000000] efi: Not removing mem45: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem46: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem47: MMIO range=[0xfec20000-0xfec20fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem48: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem49: MMIO range=[0xfed61000-0xfed70fff] (64KB) from e820 map
[    0.000000] efi: Not removing mem50: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[    0.000000] efi: Remove mem51: MMIO range=[0xfef00000-0xffffffff] (17MB) from e820 map
[    0.000000] e820: remove [mem 0xfef00000-0xffffffff] reserved
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970-GAMING, BIOS F2 04/06/2016
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 4018.385 MHz processor
[    0.001025] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001048] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001071] last_pfn = 0x82f000 max_arch_pfn = 0x400000000
[    0.001089] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001747] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[    0.001755] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[    0.001772] Using GB pages for direct mapping
[    0.002617] Secure boot disabled
[    0.002619] ACPI: Early table checksum verification disabled
[    0.002622] ACPI: RSDP 0x00000000CE249000 000024 (v02 ALASKA)
[    0.002626] ACPI: XSDT 0x00000000CE249070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.002631] ACPI: FACP 0x00000000CE24E998 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.002636] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-615)
[    0.002640] ACPI: DSDT 0x00000000CE249158 005839 (v02 ALASKA A M I    00000088 INTL 20051117)
[    0.002643] ACPI: FACS 0x00000000CE63BF80 000040
[    0.002646] ACPI: APIC 0x00000000CE24EA90 00009E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.002649] ACPI: FPDT 0x00000000CE24EB30 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.002651] ACPI: MCFG 0x00000000CE24EB78 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.002654] ACPI: HPET 0x00000000CE24EBB8 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.002657] ACPI: SSDT 0x00000000CE24EBF0 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.002659] ACPI: IVRS 0x00000000CE250308 0000D0 (v01 AMD    RD890S   00202031 AMD  00000000)
[    0.002662] ACPI: Reserving FACP table memory at [mem 0xce24e998-0xce24ea8b]
[    0.002663] ACPI: Reserving DSDT table memory at [mem 0xce249158-0xce24e990]
[    0.002664] ACPI: Reserving FACS table memory at [mem 0xce63bf80-0xce63bfbf]
[    0.002665] ACPI: Reserving APIC table memory at [mem 0xce24ea90-0xce24eb2d]
[    0.002666] ACPI: Reserving FPDT table memory at [mem 0xce24eb30-0xce24eb73]
[    0.002667] ACPI: Reserving MCFG table memory at [mem 0xce24eb78-0xce24ebb3]
[    0.002668] ACPI: Reserving HPET table memory at [mem 0xce24ebb8-0xce24ebef]
[    0.002669] ACPI: Reserving SSDT table memory at [mem 0xce24ebf0-0xce250303]
[    0.002670] ACPI: Reserving IVRS table memory at [mem 0xce250308-0xce2503d7]
[    0.002714] Zone ranges:
[    0.002714]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002716]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.002718]   Normal   [mem 0x0000000100000000-0x000000082effffff]
[    0.002719] Movable zone start for each node
[    0.002720] Early memory node ranges
[    0.002721]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.002722]   node   0: [mem 0x0000000000100000-0x00000000ce1fefff]
[    0.002723]   node   0: [mem 0x00000000cf156000-0x00000000cf156fff]
[    0.002724]   node   0: [mem 0x00000000cf35d000-0x00000000cf7fffff]
[    0.002725]   node   0: [mem 0x0000000100001000-0x000000082effffff]
[    0.002729] Initmem setup node 0 [mem 0x0000000000001000-0x000000082effffff]
[    0.002735] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.002776] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.003333] On node 0, zone DMA32: 3927 pages in unavailable ranges
[    0.003333] On node 0, zone DMA32: 518 pages in unavailable ranges
[    0.003333] On node 0, zone Normal: 2049 pages in unavailable ranges
[    0.003333] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.003333] ACPI: PM-Timer IO Port: 0x808
[    0.003333] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.003333] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[    0.003333] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[    0.003333] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.003333] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.003333] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.003333] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.003333] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.003333] [mem 0xcf800000-0xfebfffff] available for PCI devices
[    0.003333] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.003333] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.003333] percpu: Embedded 41 pages/cpu s128760 r8192 d30984 u262144
[    0.003333] pcpu-alloc: s128760 r8192 d30984 u262144 alloc=1*2097152
[    0.003333] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.003333] Built 1 zonelists, mobility grouping on.  Total pages: 8246855
[    0.003333] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc2-bdver2 root=/dev/nvme0n1p7 ro psmouse.synaptics_intertouch=1 zswap.max_pool_percent=16 zswap.zpool=z3fold slub_debug=FZP page_poison=1 netconsole=6666@10.0.0.14/eth0,6666@10.0.0.3/70:85:C2:30:EC:01
[    0.003333] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc2-bdver2", will be passed to user space.
[    0.003333] printk: log_buf_len individual max cpu contribution: 8192 bytes
[    0.003333] printk: log_buf_len total cpu_extra contributions: 57344 bytes
[    0.003333] printk: log_buf_len min size: 65536 bytes
[    0.003333] printk: log_buf_len: 131072 bytes
[    0.003333] printk: early log buf free: 57032(87%)
[    0.003333] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.003333] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.003333] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off
[    0.003333] software IO TLB: area num 8.
[    0.003333] Memory: 3395652K/33511684K available (10240K kernel code, 631K rwdata, 2388K rodata, 1060K init, 1540K bss, 846564K reserved, 0K cma-reserved)
[    0.003333] **********************************************************
[    0.003333] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.003333] **                                                      **
[    0.003333] ** This system shows unhashed kernel memory addresses   **
[    0.003333] ** via the console, logs, and other interfaces. This    **
[    0.003333] ** might reduce the security of your system.            **
[    0.003333] **                                                      **
[    0.003333] ** If you see this message and you are not debugging    **
[    0.003333] ** the kernel, report this immediately to your system   **
[    0.003333] ** administrator!                                       **
[    0.003333] **                                                      **
[    0.003333] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.003333] **********************************************************
[    0.003333] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.003333] rcu: Hierarchical RCU implementation.
[    0.003333] 	Tracing variant of Tasks RCU enabled.
[    0.003333] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.003333] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 16
[    0.003333] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.003333] kfence: initialized - using 2097152 bytes for 255 objects at 0xffff93224ba00000-0xffff93224bc00000
[    0.003333] Console: colour dummy device 80x25
[    0.003333] printk: console [tty0] enabled
[    0.003333] ACPI: Core revision 20221020
[    0.003333] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.003333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39ec3471d7b, max_idle_ns: 440795317545 ns
[    0.641331] Calibrating delay loop (skipped), value calculated using timer frequency.. 8039.63 BogoMIPS (lpj=13394616)
[    0.641336] pid_max: default: 32768 minimum: 301
[    0.677861] LSM: initializing lsm=capability,yama
[    0.677874] Yama: becoming mindful.
[    0.678093] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.678231] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.678670] LVT offset 1 assigned for vector 0xf9
[    0.678678] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.678681] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.678688] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.678693] Spectre V2 : Mitigation: Retpolines
[    0.678695] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.678698] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.678700] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.678703] RETBleed: Mitigation: untrained return thunk
[    0.678707] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.678711] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.682255] Freeing SMP alternatives memory: 32K
[    0.789205] smpboot: CPU0: AMD FX-8370 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.789450] cblist_init_generic: Setting adjustable number of callback queues.
[    0.789455] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.789483] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.789505] ... version:                0
[    0.789507] ... bit width:              48
[    0.789509] ... generic registers:      6
[    0.789511] ... value mask:             0000ffffffffffff
[    0.789513] ... max period:             00007fffffffffff
[    0.789516] ... fixed-purpose events:   0
[    0.789518] ... event mask:             000000000000003f
[    0.789612] rcu: Hierarchical SRCU implementation.
[    0.789614] rcu: 	Max phase no-delay instances is 1000.
[    0.789685] MCE: In-kernel MCE decoding enabled.
[    0.789762] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.789912] smp: Bringing up secondary CPUs ...
[    0.790066] x86: Booting SMP configuration:
[    0.790068] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.853404] smp: Brought up 1 node, 8 CPUs
[    0.853404] smpboot: Max logical packages: 1
[    0.853404] smpboot: Total of 8 processors activated (64319.08 BogoMIPS)
[    4.453922] node 0 deferred pages initialised in 3597ms
[    4.470964] allocated 67108864 bytes of page_ext
[    4.471407] devtmpfs: initialized
[    4.471601] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    4.471601] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    4.471720] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    4.472091] thermal_sys: Registered thermal governor 'step_wise'
[    4.472092] thermal_sys: Registered thermal governor 'user_space'
[    4.472112] cpuidle: using governor menu
[    4.472135] PCI: Using configuration type 1 for base access
[    4.472135] PCI: Using configuration type 1 for extended access
[    4.472135] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    4.472135] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    4.472135] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    4.472135] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    4.527997] raid6: sse2x4   gen()  9811 MB/s
[    4.584664] raid6: sse2x2   gen()  8376 MB/s
[    4.641333] raid6: sse2x1   gen()  6910 MB/s
[    4.641336] raid6: using algorithm sse2x4 gen() 9811 MB/s
[    4.698000] raid6: .... xor() 3970 MB/s, rmw enabled
[    4.698003] raid6: using ssse3x2 recovery algorithm
[    4.698161] ACPI: Added _OSI(Module Device)
[    4.698164] ACPI: Added _OSI(Processor Device)
[    4.698166] ACPI: Added _OSI(3.0 _SCP Extensions)
[    4.698169] ACPI: Added _OSI(Processor Aggregator Device)
[    4.710736] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    4.713541] ACPI: Interpreter enabled
[    4.713552] ACPI: PM: (supports S0 S5)
[    4.713555] ACPI: Using IOAPIC for interrupt routing
[    4.713867] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    4.713871] PCI: Using E820 reservations for host bridge windows
[    4.714390] ACPI: Enabled 10 GPEs in block 00 to 1F
[    4.729747] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    4.729757] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    4.729770] acpi PNP0A08:00: _OSC: OS requested [PME AER PCIeCapability LTR]
[    4.729774] acpi PNP0A08:00: _OSC: platform willing to grant [PME AER PCIeCapability LTR]
[    4.729778] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
[    4.730258] PCI host bridge to bus 0000:00
[    4.730262] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    4.730266] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    4.730270] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    4.730274] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    4.730277] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    4.730281] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
[    4.730285] pci_bus 0000:00: root bus resource [bus 00-ff]
[    4.730316] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    4.730463] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[    4.730613] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    4.730633] pci 0000:00:02.0: enabling Extended Tags
[    4.730662] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    4.730784] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[    4.730803] pci 0000:00:04.0: enabling Extended Tags
[    4.730830] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    4.730956] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
[    4.730974] pci 0000:00:06.0: enabling Extended Tags
[    4.731002] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    4.731132] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    4.731147] pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
[    4.731156] pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
[    4.731165] pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
[    4.731174] pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
[    4.731182] pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
[    4.731191] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
[    4.731350] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    4.731364] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
[    4.731512] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    4.731526] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
[    4.731590] pci 0000:00:12.2: supports D1 D2
[    4.731593] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    4.731751] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    4.731766] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
[    4.731914] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    4.731929] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
[    4.731993] pci 0000:00:13.2: supports D1 D2
[    4.731995] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    4.732120] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    4.732275] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    4.732292] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[    4.732347] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    4.732462] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    4.732634] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    4.732786] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    4.732800] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
[    4.732979] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    4.733010] pci 0000:00:15.0: enabling Extended Tags
[    4.733050] pci 0000:00:15.0: supports D1 D2
[    4.733182] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    4.733213] pci 0000:00:15.1: enabling Extended Tags
[    4.733253] pci 0000:00:15.1: supports D1 D2
[    4.733377] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    4.733392] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
[    4.733553] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    4.733567] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
[    4.733631] pci 0000:00:16.2: supports D1 D2
[    4.733634] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    4.733738] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    4.733817] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    4.733887] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    4.733962] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    4.734035] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    4.734110] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    4.734224] pci 0000:01:00.0: [1002:6758] type 00 class 0x030000
[    4.734242] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.734255] pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit]
[    4.734264] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    4.734278] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
[    4.734286] pci 0000:01:00.0: enabling Extended Tags
[    4.734307] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    4.734343] pci 0000:01:00.0: supports D1 D2
[    4.734459] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300
[    4.734477] pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit]
[    4.734512] pci 0000:01:00.1: enabling Extended Tags
[    4.734561] pci 0000:01:00.1: supports D1 D2
[    4.734667] pci 0000:00:02.0: PCI bridge to [bus 01]
[    4.734672] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    4.734681] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    4.734685] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.734737] pci 0000:02:00.0: [1b21:2142] type 00 class 0x0c0330
[    4.734755] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
[    4.734793] pci 0000:02:00.0: enabling Extended Tags
[    4.734852] pci 0000:02:00.0: PME# supported from D0
[    4.734883] pci 0000:02:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:04.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[    4.734977] pci 0000:00:04.0: PCI bridge to [bus 02]
[    4.734983] pci 0000:00:04.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    4.735044] pci 0000:03:00.0: [15b7:5009] type 00 class 0x010802
[    4.735063] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe803fff 64bit]
[    4.735086] pci 0000:03:00.0: reg 0x20: [mem 0xfe804000-0xfe8040ff 64bit]
[    4.735206] pci 0000:03:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:06.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    4.735326] pci 0000:00:06.0: PCI bridge to [bus 03]
[    4.735332] pci 0000:00:06.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    4.735345] pci_bus 0000:04: extended config space not accessible
[    4.735408] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    4.735417] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    4.735421] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    4.735425] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    4.735429] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    4.735433] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
[    4.735437] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
[    4.735502] pci 0000:05:00.0: [1969:e0a1] type 00 class 0x020000
[    4.735528] pci 0000:05:00.0: reg 0x10: [mem 0xfe700000-0xfe73ffff 64bit]
[    4.735541] pci 0000:05:00.0: reg 0x18: [io  0xd000-0xd07f]
[    4.735600] pci 0000:05:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    4.735659] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.735790] pci 0000:00:15.0: PCI bridge to [bus 05]
[    4.735796] pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
[    4.735801] pci 0000:00:15.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    4.735868] pci 0000:06:00.0: [1106:3483] type 00 class 0x0c0330
[    4.735889] pci 0000:06:00.0: reg 0x10: [mem 0xfe600000-0xfe600fff 64bit]
[    4.735980] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.736070] pci 0000:00:15.1: PCI bridge to [bus 06]
[    4.736078] pci 0000:00:15.1:   bridge window [mem 0xfe600000-0xfe6fffff]
[    4.736104] pci_bus 0000:00: on NUMA node 0
[    4.736990] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    4.737151] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    4.737317] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    4.737482] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    4.737623] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    4.737735] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    4.737847] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    4.737965] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    4.738215] iommu: Default domain type: Translated 
[    4.738219] iommu: DMA domain TLB invalidation policy: lazy mode 
[    4.738386] SCSI subsystem initialized
[    4.738416] libata version 3.00 loaded.
[    4.738453] EDAC MC: Ver: 3.0.0
[    4.738562] efivars: Registered efivars operations
[    4.738562] PCI: Using ACPI for IRQ routing
[    4.738562] PCI: pci_cache_line_size set to 64 bytes
[    4.738562] e820: reserve RAM buffer [mem 0xce1ff000-0xcfffffff]
[    4.738562] e820: reserve RAM buffer [mem 0xcf157000-0xcfffffff]
[    4.738562] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[    4.738562] e820: reserve RAM buffer [mem 0x82f000000-0x82fffffff]
[    4.738562] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    4.738562] pci 0000:01:00.0: vgaarb: bridge control possible
[    4.738562] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    4.738562] vgaarb: loaded
[    4.738562] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    4.738562] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    4.741427] clocksource: Switched to clocksource tsc-early
[    4.741722] pnp: PnP ACPI init
[    4.741886] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    4.742459] system 00:01: [io  0x040b] has been reserved
[    4.742464] system 00:01: [io  0x04d6] has been reserved
[    4.742468] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    4.742472] system 00:01: [io  0x0c14] has been reserved
[    4.742476] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    4.742480] system 00:01: [io  0x0c52] has been reserved
[    4.742489] system 00:01: [io  0x0c6c] has been reserved
[    4.742495] system 00:01: [io  0x0c6f] has been reserved
[    4.742505] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    4.742513] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    4.742519] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    4.742525] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    4.742531] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    4.742538] system 00:01: [io  0x0800-0x089f] has been reserved
[    4.742544] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    4.742549] system 00:01: [io  0x0900-0x090f] has been reserved
[    4.742553] system 00:01: [io  0x0910-0x091f] has been reserved
[    4.742557] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    4.742568] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    4.742574] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    4.742578] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    4.742583] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    4.742588] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    4.742593] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    4.742597] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[    4.742945] system 00:02: [io  0x0220-0x0227] has been reserved
[    4.742950] system 00:02: [io  0x0228-0x0237] has been reserved
[    4.742954] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    4.743474] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    4.743738] system 00:06: [mem 0xfeb20000-0xfeb23fff] has been reserved
[    4.743968] system 00:07: [mem 0xfec20000-0xfec200ff] could not be reserved
[    4.744240] pnp: PnP ACPI: found 8 devices
[    4.751723] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    4.751782] NET: Registered PF_INET protocol family
[    4.752362] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    4.755545] tcp_listen_portaddr_hash hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    4.755648] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    4.756056] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    4.757047] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes, linear)
[    4.757991] TCP: Hash tables configured (established 262144 bind 65536)
[    4.758524] UDP hash table entries: 16384 (order: 8, 1572864 bytes, linear)
[    4.759084] UDP-Lite hash table entries: 16384 (order: 8, 1572864 bytes, linear)
[    4.759295] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    4.759334] pci 0000:00:02.0: PCI bridge to [bus 01]
[    4.759339] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    4.759344] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    4.759348] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.759354] pci 0000:00:04.0: PCI bridge to [bus 02]
[    4.759358] pci 0000:00:04.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    4.759363] pci 0000:00:06.0: PCI bridge to [bus 03]
[    4.759367] pci 0000:00:06.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    4.759372] pci 0000:00:14.4: PCI bridge to [bus 04]
[    4.759382] pci 0000:00:15.0: PCI bridge to [bus 05]
[    4.759386] pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
[    4.759391] pci 0000:00:15.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    4.759398] pci 0000:00:15.1: PCI bridge to [bus 06]
[    4.759402] pci 0000:00:15.1:   bridge window [mem 0xfe600000-0xfe6fffff]
[    4.759410] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    4.759414] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    4.759417] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    4.759421] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    4.759424] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    4.759427] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xffffffff window]
[    4.759431] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    4.759434] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    4.759437] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.759440] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    4.759444] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[    4.759447] pci_bus 0000:04: resource 4 [io  0x0000-0x03af window]
[    4.759450] pci_bus 0000:04: resource 5 [io  0x03e0-0x0cf7 window]
[    4.759453] pci_bus 0000:04: resource 6 [io  0x03b0-0x03df window]
[    4.759456] pci_bus 0000:04: resource 7 [io  0x0d00-0xffff window]
[    4.759459] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000dffff window]
[    4.759462] pci_bus 0000:04: resource 9 [mem 0xd0000000-0xffffffff window]
[    4.759466] pci_bus 0000:05: resource 0 [io  0xd000-0xdfff]
[    4.759469] pci_bus 0000:05: resource 1 [mem 0xfe700000-0xfe7fffff]
[    4.759472] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff]
[    4.761471] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    4.761480] pci 0000:02:00.0: PME# does not work under D0, disabling it
[    4.762013] PCI: CLS 64 bytes, default 64
[    4.762094] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    4.763273] pci 0000:00:00.0: Adding to iommu group 0
[    4.763299] pci 0000:00:02.0: Adding to iommu group 1
[    4.763323] pci 0000:00:04.0: Adding to iommu group 2
[    4.763342] pci 0000:00:06.0: Adding to iommu group 3
[    4.763362] pci 0000:00:11.0: Adding to iommu group 4
[    4.763394] pci 0000:00:12.0: Adding to iommu group 5
[    4.763416] pci 0000:00:12.2: Adding to iommu group 5
[    4.763448] pci 0000:00:13.0: Adding to iommu group 6
[    4.763465] pci 0000:00:13.2: Adding to iommu group 6
[    4.763485] pci 0000:00:14.0: Adding to iommu group 7
[    4.763509] pci 0000:00:14.2: Adding to iommu group 8
[    4.763529] pci 0000:00:14.3: Adding to iommu group 9
[    4.763555] pci 0000:00:14.4: Adding to iommu group 10
[    4.763585] pci 0000:00:14.5: Adding to iommu group 11
[    4.763629] pci 0000:00:15.0: Adding to iommu group 12
[    4.763648] pci 0000:00:15.1: Adding to iommu group 12
[    4.763685] pci 0000:00:16.0: Adding to iommu group 13
[    4.763704] pci 0000:00:16.2: Adding to iommu group 13
[    4.763742] pci 0000:01:00.0: Adding to iommu group 14
[    4.763769] pci 0000:01:00.1: Adding to iommu group 14
[    4.763790] pci 0000:02:00.0: Adding to iommu group 15
[    4.763814] pci 0000:03:00.0: Adding to iommu group 16
[    4.763823] pci 0000:05:00.0: Adding to iommu group 12
[    4.763832] pci 0000:06:00.0: Adding to iommu group 12
[    4.770562] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    4.770687] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    4.770691] software IO TLB: mapped [mem 0x00000000bf06e000-0x00000000c306e000] (64MB)
[    4.770740] LVT offset 0 assigned for vector 0x400
[    4.770822] perf: AMD IBS detected (0x000000ff)
[    4.771382] Initialise system trusted keyrings
[    4.771446] workingset: timestamp_bits=46 max_order=23 bucket_order=0
[    4.771882] NET: Registered PF_ALG protocol family
[    4.771886] xor: automatically using best checksumming function   avx       
[    4.771890] Key type asymmetric registered
[    4.771893] Asymmetric key parser 'x509' registered
[    4.773285] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    4.773339] io scheduler kyber registered
[    4.775815] IPMI message handler: version 39.2
[    4.777252] ahci 0000:00:11.0: version 3.0
[    4.777359] nvme nvme0: pci function 0000:03:00.0
[    4.777453] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.777461] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
[    4.777895] scsi host0: ahci
[    4.778105] scsi host1: ahci
[    4.778200] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[    4.778204] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
[    4.788660] alx 0000:05:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [1c:1b:0d:93:c2:07]
[    4.788700] rtc_cmos 00:03: RTC can wake from S4
[    4.788923] rtc_cmos 00:03: registered as rtc0
[    4.788964] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    4.789039] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x300000 bytes
[    4.789043] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=1024x768x32, linelength=4096
[    4.791231] Console: switching to colour frame buffer device 128x48
[    4.792591] nvme nvme0: allocated 32 MiB host memory buffer.
[    4.793315] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    4.793487] NET: Registered PF_INET6 protocol family
[    4.793710] nvme nvme0: 8/0/0 default/read/poll queues
[    4.794036] Segment Routing with IPv6
[    4.794068] In-situ OAM (IOAM) with IPv6
[    4.794129] NET: Registered PF_PACKET protocol family
[    4.794929] microcode: microcode updated early to new patch_level=0x06000852
[    4.795006] microcode: CPU1: patch_level=0x06000852
[    4.795008] microcode: CPU3: patch_level=0x06000852
[    4.795008] microcode: CPU2: patch_level=0x06000852
[    4.795011] microcode: CPU0: patch_level=0x06000852
[    4.795011] microcode: CPU5: patch_level=0x06000852
[    4.795080] microcode: CPU4: patch_level=0x06000852
[    4.795123] microcode: CPU6: patch_level=0x06000852
[    4.795123] microcode: CPU7: patch_level=0x06000852
[    4.795202] microcode: Microcode Update Driver: v2.2.
[    4.795208] IPI shorthand broadcast: enabled
[    4.798257] sched_clock: Marking stable (4176668860, 621330127)->(4810079392, -12080405)
[    4.798440] registered taskstats version 1
[    4.798689] Loading compiled-in X.509 certificates
[    4.798874]  nvme0n1: p1 p2 p3 p4 p5 p6 p7
[    4.804554] zswap: loaded using pool zstd/z3fold
[    4.809523] debug_vm_pgtable: [debug_vm_pgtable         ]: Validating architecture page table helpers
[    5.090850] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.091730] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.093292] ata1.00: ATA-9: HP SSD S700 Pro 1TB, R0201B, max UDMA/100
[    5.094128] ata1.00: 2000409264 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    5.094952] ata2.00: ATAPI: PIONEER BD-RW   BDR-208D, 1.50, max UDMA/100
[    5.096045] ata1.00: Features: Dev-Sleep
[    5.097302] ata1.00: configured for UDMA/100
[    5.098319] scsi 0:0:0:0: Direct-Access     ATA      HP SSD S700 Pro  1B   PQ: 0 ANSI: 5
[    5.099172] ata2.00: configured for UDMA/100
[    5.099679] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
[    5.100784] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    5.101602] sd 0:0:0:0: [sda] Write Protect is off
[    5.102368] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.102383] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.103192] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    5.105661]  sda: sda1
[    5.106541] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    5.110746] scsi 1:0:0:0: CD-ROM            PIONEER  BD-RW   BDR-208D 1.50 PQ: 0 ANSI: 5
[    5.194200] Btrfs loaded, crc32c=crc32c-intel, zoned=no, fsverity=no
[    5.376087] netpoll: netconsole: local port 6666
[    5.376856] netpoll: netconsole: local IPv4 address 10.0.0.14
[    5.377638] netpoll: netconsole: interface 'eth0'
[    5.378405] netpoll: netconsole: remote port 6666
[    5.379123] netpoll: netconsole: remote IPv4 address 10.0.0.3
[    5.379859] netpoll: netconsole: remote ethernet address 70:85:c2:30:ec:01
[    5.380568] netpoll: netconsole: device eth0 not up yet, forcing it
[    5.794671] tsc: Refined TSC clocksource calibration: 4018.622 MHz
[    5.795405] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39ed1412859, max_idle_ns: 440795304727 ns
[    5.796198] clocksource: Switched to clocksource tsc
[    6.217448] alx 0000:05:00.0 eth0: NIC Up: 100 Mbps Full
[    6.218422] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.224795] printk: console [netcon0] enabled
[    6.230609] netconsole: network logging started
[    6.232453] BTRFS: device label zen3_musl devid 1 transid 97815 /dev/root scanned by swapper/0 (1)
[    6.233430] BTRFS info (device nvme0n1p7): using xxhash64 (xxhash64-generic) checksum algorithm
[    6.234229] BTRFS info (device nvme0n1p7): using free space tree
[    6.240287] BTRFS info (device nvme0n1p7): enabling ssd optimizations
[    6.241123] BTRFS info (device nvme0n1p7): auto enabling async discard
[    6.242708] VFS: Mounted root (btrfs filesystem) readonly on device 0:16.
[    6.244081] devtmpfs: mounted
[    6.245276] Freeing unused kernel image (initmem) memory: 1060K
[    6.258022] Write protecting the kernel read-only data: 14336k
[    6.259410] Freeing unused kernel image (rodata/data gap) memory: 1708K
[    6.262536] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    6.263413] rodata_test: all tests were successful
[    6.264285] kallsyms_selftest: start
[    6.264289] Run /sbin/init as init process
[    6.265993]   with arguments:
[    6.265994]     /sbin/init
[    6.265996]   with environment:
[    6.265999]     HOME=/
[    6.266000]     TERM=linux
[    6.266001]     BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc2-bdver2
[    7.747423] kallsyms_selftest:  ---------------------------------------------------------
[    7.748193] kallsyms_selftest: | nr_symbols | compressed size | original size | ratio(%) |
[    7.748965] kallsyms_selftest: |---------------------------------------------------------|
[    7.749732] kallsyms_selftest: |      34964 |        380879   |       655481  |  58.10   |
[    7.750473] kallsyms_selftest:  ---------------------------------------------------------
[    7.990395] kallsyms_selftest: kallsyms_lookup_name() looked up 34964 symbols
[    7.990399] kallsyms_selftest: The time spent on each symbol is (ns): min=1375, max=24683, avg=6685
[    7.994113] kallsyms_selftest: kallsyms_on_each_symbol() traverse all: 3711247 ns
[    7.994121] kallsyms_selftest: kallsyms_on_each_match_symbol() traverse all: 6796 ns
[    7.994123] kallsyms_selftest: finish
[    8.061071] ACPI: \_PR_.P001: Found 2 idle states
[    8.061889] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    8.061896] ACPI: button: Power Button [PWRB]
[    8.062021] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    8.062025] ACPI: button: Power Button [PWRF]
[    8.065525] ACPI: \_PR_.P002: Found 2 idle states
[    8.073633] ACPI: \_PR_.P003: Found 2 idle states
[    8.082984] ACPI: \_PR_.P004: Found 2 idle states
[    8.085740] ACPI: \_PR_.P005: Found 2 idle states
[    8.087809] ACPI: bus type USB registered
[    8.087890] usbcore: registered new interface driver usbfs
[    8.088304] usbcore: registered new interface driver hub
[    8.088358] usbcore: registered new device driver usb
[    8.090439] ACPI: \_PR_.P006: Found 2 idle states
[    8.094895] ACPI: \_PR_.P007: Found 2 idle states
[    8.100025] ACPI: \_PR_.P008: Found 2 idle states
[    8.103862] QUIRK: Enable AMD PLL fix
[    8.103888] xhci_hcd 0000:06:00.0: xHCI Host Controller
[    8.103905] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 1
[    8.103965] xhci_hcd 0000:06:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000d address=0xce210880 flags=0x0000]
[    8.105396] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    8.105610] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    8.115626] ACPI: bus type drm_connector registered
[    8.121398] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    8.121415] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[    8.131697] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    8.146949] alx 0000:05:00.0 enp5s0: renamed from eth0 (while UP)
[    8.153649] BTRFS: device label ubuntu devid 1 transid 841 /dev/nvme0n1p3 scanned by (udev-worker) (695)
[    8.159061] BTRFS: device label bdver2_musl devid 1 transid 94829 /dev/nvme0n1p4 scanned by (udev-worker) (696)
[    8.159338] BTRFS: device label bisect_x86-64-v2 devid 1 transid 34250 /dev/nvme0n1p5 scanned by (udev-worker) (701)
[    8.160668] xhci_hcd 0000:02:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010
[    8.161253] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    8.161270] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[    8.161279] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    8.161416] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    8.161420] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.161423] usb usb2: Product: xHCI Host Controller
[    8.161425] usb usb2: Manufacturer: Linux 6.3.0-rc2-bdver2 xhci-hcd
[    8.161428] usb usb2: SerialNumber: 0000:02:00.0
[    8.161786] hub 2-0:1.0: USB hub found
[    8.161805] hub 2-0:1.0: 2 ports detected
[    8.162109] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    8.162199] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[    8.162203] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.162207] usb usb3: Product: xHCI Host Controller
[    8.162210] usb usb3: Manufacturer: Linux 6.3.0-rc2-bdver2 xhci-hcd
[    8.162214] usb usb3: SerialNumber: 0000:02:00.0
[    8.162493] hub 3-0:1.0: USB hub found
[    8.162512] hub 3-0:1.0: 2 ports detected
[    8.166210] BTRFS: device label distfiles devid 1 transid 1377 /dev/nvme0n1p6 scanned by (udev-worker) (690)
[    8.169260] cryptd: max_cpu_qlen set to 1000
[    8.170488] BTRFS info: devid 1 device path /dev/root changed to /dev/nvme0n1p7 scanned by (udev-worker) (705)
[    8.177531] AVX version of gcm_enc/dec engaged.
[    8.177577] AES CTR mode by8 optimization enabled
[    8.288964] alx 0000:05:00.0 enp5s0: fatal interrupt 0x200, resetting
[    8.294234] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full
[   18.103930] xhci_hcd 0000:06:00.0: can't setup: -110
[   18.103944] xhci_hcd 0000:06:00.0: USB bus 1 deregistered
[   18.104050] ehci-pci 0000:00:13.2: EHCI Host Controller
[   18.104065] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 1
[   18.104077] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[   18.104085] ehci-pci 0000:00:13.2: debug port 1
[   18.104114] xhci_hcd 0000:06:00.0: init 0000:06:00.0 fail, -110
[   18.104117] xhci_hcd: probe of 0000:06:00.0 failed with error -110
[   18.104164] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
[   18.118253] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[   18.118397] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[   18.118402] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.118404] usb usb1: Product: EHCI Host Controller
[   18.118406] usb usb1: Manufacturer: Linux 6.3.0-rc2-bdver2 ehci_hcd
[   18.118408] usb usb1: SerialNumber: 0000:00:13.2
[   18.118641] hub 1-0:1.0: USB hub found
[   18.118658] hub 1-0:1.0: 5 ports detected
[   18.118975] ehci-pci 0000:00:12.2: EHCI Host Controller
[   18.118986] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 4
[   18.118997] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[   18.119006] ehci-pci 0000:00:12.2: debug port 1
[   18.119063] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[   18.134735] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[   18.134855] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[   18.134860] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.134862] usb usb4: Product: EHCI Host Controller
[   18.134864] usb usb4: Manufacturer: Linux 6.3.0-rc2-bdver2 ehci_hcd
[   18.134866] usb usb4: SerialNumber: 0000:00:12.2
[   18.135086] hub 4-0:1.0: USB hub found
[   18.135105] hub 4-0:1.0: 5 ports detected
[   18.135470] ehci-pci 0000:00:16.2: EHCI Host Controller
[   18.135485] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5
[   18.135494] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[   18.135504] ehci-pci 0000:00:16.2: debug port 1
[   18.135557] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000
[   18.148064] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[   18.148177] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[   18.148182] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.148185] usb usb5: Product: EHCI Host Controller
[   18.148187] usb usb5: Manufacturer: Linux 6.3.0-rc2-bdver2 ehci_hcd
[   18.148188] usb usb5: SerialNumber: 0000:00:16.2
[   18.148401] hub 5-0:1.0: USB hub found
[   18.148423] hub 5-0:1.0: 4 ports detected
[   18.148704] ohci-pci 0000:00:12.0: OHCI PCI host controller
[   18.148713] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[   18.148764] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[   18.151198] it87: Found IT8620E chip at 0x228, revision 4
[   18.151223] it87: Beeping is supported
[   18.153155] acpi_cpufreq: overriding BIOS provided _PSD data
[   18.165316] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   18.165926] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   18.174551] Asymmetric key parser 'pkcs8' registered
[   18.212176] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[   18.212186] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.212190] usb usb6: Product: OHCI PCI host controller
[   18.212193] usb usb6: Manufacturer: Linux 6.3.0-rc2-bdver2 ohci_hcd
[   18.212195] usb usb6: SerialNumber: 0000:00:12.0
[   18.212478] hub 6-0:1.0: USB hub found
[   18.212493] hub 6-0:1.0: 5 ports detected
[   18.213614] sr 1:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray
[   18.213625] cdrom: Uniform CD-ROM driver Revision: 3.20
[   18.221803] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input2
[   18.225517] ohci-pci 0000:00:13.0: OHCI PCI host controller
[   18.226013] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 7
[   18.226068] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
[   18.232258] [drm] radeon kernel modesetting enabled.
[   18.233969] Console: switching to colour dummy device 80x25
[   18.234399] radeon 0000:01:00.0: vgaarb: deactivate vga console
[   18.246549] [drm] initializing kernel modesetting (TURKS 0x1002:0x6758 0x174B:0xE194 0x00).
[   18.246687] ATOM BIOS: TURKS
[   18.246874] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   18.246881] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[   18.246888] [drm] Detected VRAM RAM=1024M, BAR=256M
[   18.246890] [drm] RAM width 128bits DDR
[   18.246978] [drm] radeon: 1024M of VRAM memory ready
[   18.246982] [drm] radeon: 1024M of GTT memory ready.
[   18.247014] [drm] Loading TURKS Microcode
[   18.250959] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[   18.251483] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   18.251489] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.251494] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   18.251498] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   18.251501] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[   18.251506] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   18.251509] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   18.251512] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   18.251515] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   18.252006] [drm] Internal thermal controller without fan control
[   18.257087] [drm] radeon: dpm initialized
[   18.258447] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   18.259676] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   18.269576] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   18.274106] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[   18.274330] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[   18.274558] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[   18.278292] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[   18.278721] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[   18.278837] radeon 0000:01:00.0: WB enabled
[   18.278840] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[   18.278843] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[   18.279587] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118
[   18.279879] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   18.280779] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   18.283250] radeon 0000:01:00.0: radeon: using MSI.
[   18.283329] [drm] radeon: irq initialized.
[   18.284665] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   18.285501] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[   18.285506] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.285509] usb usb7: Product: OHCI PCI host controller
[   18.285511] usb usb7: Manufacturer: Linux 6.3.0-rc2-bdver2 ohci_hcd
[   18.285513] usb usb7: SerialNumber: 0000:00:13.0
[   18.286155] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   18.287114] hub 7-0:1.0: USB hub found
[   18.287133] hub 7-0:1.0: 5 ports detected
[   18.290602] ohci-pci 0000:00:14.5: OHCI PCI host controller
[   18.290621] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 8
[   18.290665] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[   18.299954] [drm] ring test on 0 succeeded in 2 usecs
[   18.299968] [drm] ring test on 3 succeeded in 7 usecs
[   18.352272] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[   18.352285] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.352292] usb usb8: Product: OHCI PCI host controller
[   18.352297] usb usb8: Manufacturer: Linux 6.3.0-rc2-bdver2 ohci_hcd
[   18.352302] usb usb8: SerialNumber: 0000:00:14.5
[   18.352846] hub 8-0:1.0: USB hub found
[   18.352877] hub 8-0:1.0: 2 ports detected
[   18.353800] ohci-pci 0000:00:16.0: OHCI PCI host controller
[   18.353820] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 9
[   18.353889] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
[   18.412307] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[   18.412319] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.412326] usb usb9: Product: OHCI PCI host controller
[   18.412331] usb usb9: Manufacturer: Linux 6.3.0-rc2-bdver2 ohci_hcd
[   18.412335] usb usb9: SerialNumber: 0000:00:16.0
[   18.412859] hub 9-0:1.0: USB hub found
[   18.412888] hub 9-0:1.0: 4 ports detected
[   18.477156] [drm] ring test on 5 succeeded in 2 usecs
[   18.477173] [drm] UVD initialized successfully.
[   18.477527] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops radeon_audio_component_bind_ops [radeon])
[   18.477712] [drm] ib test on ring 0 succeeded in 0 usecs
[   18.477806] [drm] ib test on ring 3 succeeded in 0 usecs
[   18.618078] usb 6-1: new low-speed USB device number 2 using ohci-pci
[   18.808176] usb 6-1: New USB device found, idVendor=046d, idProduct=c045, bcdDevice=27.30
[   18.808189] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   18.808196] usb 6-1: Product: USB-PS/2 Optical Mouse
[   18.808202] usb 6-1: Manufacturer: Logitech
[   18.846572] hid: raw HID events driver (C) Jiri Kosina
[   18.854590] usbcore: registered new interface driver usbhid
[   18.854594] usbhid: USB HID core driver
[   18.865699] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:046D:C045.0001/input/input10
[   18.865905] hid-generic 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1/input0
[   19.154783] [drm] ib test on ring 5 succeeded
[   19.154796] stackdepot: allocating hash table of 1048576 entries via kvcalloc
[   19.159218] [drm] Radeon Display Connectors
[   19.159223] [drm] Connector 0:
[   19.159225] [drm]   DP-1
[   19.159227] [drm]   HPD5
[   19.159229] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[   19.159233] [drm]   Encoders:
[   19.159235] [drm]     DFP1: INTERNAL_UNIPHY1
[   19.159237] [drm] Connector 1:
[   19.159239] [drm]   HDMI-A-1
[   19.159240] [drm]   HPD1
[   19.159242] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[   19.159246] [drm]   Encoders:
[   19.159247] [drm]     DFP2: INTERNAL_UNIPHY2
[   19.159249] [drm] Connector 2:
[   19.159251] [drm]   DVI-I-1
[   19.159252] [drm]   HPD4
[   19.159254] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[   19.159257] [drm]   Encoders:
[   19.159259] [drm]     DFP3: INTERNAL_UNIPHY
[   19.159261] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   19.280405] [drm] fb mappable at 0xD0363000
[   19.280409] [drm] vram apper at 0xD0000000
[   19.280410] [drm] size 8294400
[   19.280411] [drm] fb depth is 24
[   19.280412] [drm]    pitch is 7680
[   19.280531] fbcon: radeondrmfb (fb0) is primary device
[   19.304739] usb 6-2: new low-speed USB device number 3 using ohci-pci
[   19.310959] Console: switching to colour frame buffer device 240x67
[   19.316475] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device
[   19.316611] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[   19.520259] usb 6-2: New USB device found, idVendor=1017, idProduct=1010, bcdDevice= 1.02
[   19.520272] usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   19.520278] usb 6-2: Product: Gaming Keyboard
[   19.539359] input: Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/0003:1017:1010.0002/input/input11
[   19.595247] hid-generic 0003:1017:1010.0002: input,hidraw1: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:12.0-2/input0
[   19.679509] input: Gaming Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input12
[   19.680067] input: Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input13
[   19.735287] input: Gaming Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input14
[   19.735753] input: Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input15
[   19.736611] hid-generic 0003:1017:1010.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [Gaming Keyboard] on usb-0000:00:12.0-2/input1
[   19.941403] random: crng init done
[   19.957661] device-mapper: uevent: version 1.0.3
[   19.957831] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[   27.981341] ------------[ cut here ]------------
[   27.981351] NETDEV WATCHDOG: enp5s0 (alx): transmit queue 2 timed out
[   27.981412] WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:526 dev_watchdog+0x1a8/0x1b0
[   27.981422] Modules linked in: dm_mod input_leds joydev hid_generic usbhid hid snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio evdev led_class radeon snd_hda_codec_hdmi drm_ttm_helper ttm pkcs8_key_parser i2c_algo_bit drm_display_helper sg drm_kms_helper crc32_pclmul snd_hda_intel snd_intel_dspcfg sysimgblt syscopyarea sha512_ssse3 fam15h_power sysfillrect acpi_cpufreq k10temp snd_hda_codec sr_mod it87 sha512_generic aesni_intel libaes crypto_simd cryptd hwmon_vid ohci_pci cdrom hwmon ehci_pci ohci_hcd snd_hwdep i2c_piix4 ehci_hcd snd_hda_core drm xhci_pci snd_pcm xhci_hcd snd_timer drm_panel_orientation_quirks usbcore snd video usb_common wmi soundcore backlight button processor efivarfs
[   27.981513] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 6.3.0-rc2-bdver2 #1
[   27.981517] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970-GAMING, BIOS F2 04/06/2016
[   27.981520] RIP: 0010:dev_watchdog+0x1a8/0x1b0
[   27.981524] Code: ff ff e9 63 ff ff ff c6 05 75 94 83 00 01 4c 89 f7 e8 0c 11 fc ff 48 c7 c7 55 9e b6 9c 4c 89 f6 48 89 c2 89 d9 e8 d8 4d 9e ff <0f> 0b e9 6e ff ff ff 90 41 57 41 56 53 49 89 fe 8b 87 c8 03 00 00
[   27.981528] RSP: 0018:ffffb58d0015cea8 EFLAGS: 00010246
[   27.981532] RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000
[   27.981534] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[   27.981536] RBP: 000000007fffffff R08: 0000000000000000 R09: 0000000000000000
[   27.981539] R10: 0000000000000000 R11: 0000000000000000 R12: ffff931b464e1490
[   27.981541] R13: dead000000000122 R14: ffff931b464e1000 R15: ffff931b464e13e0
[   27.981544] FS:  0000000000000000(0000) GS:ffff93224ecc0000(0000) knlGS:0000000000000000
[   27.981547] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   27.981550] CR2: 00007facf21f5140 CR3: 00000001bcbc0000 CR4: 00000000000406e0
[   27.981552] Call Trace:
[   27.981556]  <IRQ>
[   27.981559]  ? dev_init_scheduler+0x80/0x80
[   27.981563]  ? dev_init_scheduler+0x80/0x80
[   27.981566]  call_timer_fn+0x1d/0xa0
[   27.981573]  __run_timers+0x178/0x1f0
[   27.981579]  run_timer_softirq+0x14/0x30
[   27.981583]  __do_softirq+0xc3/0x1d9
[   27.981589]  __irq_exit_rcu+0x74/0xa0
[   27.981594]  sysvec_apic_timer_interrupt+0x6d/0x80
[   27.981600]  </IRQ>
[   27.981602]  <TASK>
[   27.981604]  asm_sysvec_apic_timer_interrupt+0x16/0x20
[   27.981609] RIP: 0010:cpuidle_enter_state+0x119/0x210
[   27.981613] Code: fe ff ff e8 d9 d9 90 ff e8 44 f8 ff ff 48 89 c5 31 ff e8 7a 5b 90 ff 45 84 ed 48 8b 5c 24 10 74 05 e8 5b b6 e7 ff fb 45 85 f6 <78> 4e 44 89 f0 48 6b d0 68 48 8b 4c 13 48 48 2b 6c 24 08 49 89 6f
[   27.981616] RSP: 0018:ffffb58d000afe88 EFLAGS: 00000202
[   27.981620] RAX: 0000000000000000 RBX: ffffffffc02cf0f0 RCX: 0000000000000000
[   27.981622] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[   27.981624] RBP: 0000000683d128de R08: 0000000000000000 R09: 0000000000000000
[   27.981626] R10: 0000000000000000 R11: ffffffffc02c9e70 R12: 0000000000000002
[   27.981628] R13: 0000000000000000 R14: 0000000000000002 R15: ffff931bfece7000
[   27.981632]  ? cleanup_module+0x60/0x60 [processor]
[   27.981641]  ? cpuidle_enter_state+0x106/0x210
[   27.981645]  cpuidle_enter+0x24/0x40
[   27.981651]  do_idle+0x130/0x1c0
[   27.981656]  cpu_startup_entry+0x14/0x20
[   27.981660]  start_secondary+0x8a/0x90
[   27.981665]  secondary_startup_64_no_verify+0xcf/0xdb
[   27.981669]  </TASK>
[   27.981671] ---[ end trace 0000000000000000 ]---
[   27.990294] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full
[   31.410085] BTRFS: device label gehaim devid 1 transid 53028 /dev/dm-0 scanned by (udev-worker) (1214)
[   31.666982] BTRFS info (device nvme0n1p7: state M): use zstd compression, level 2
[   31.826015] Adding 8388604k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:8388604k SSFS
[   31.938225] BTRFS info (device dm-0): using xxhash64 (xxhash64-generic) checksum algorithm
[   31.938248] BTRFS info (device dm-0): use zstd compression, level 1
[   31.938255] BTRFS info (device dm-0): using free space tree
[   31.976677] BTRFS info (device dm-0): enabling ssd optimizations
[   31.979942] BTRFS info (device nvme0n1p6): using xxhash64 (xxhash64-generic) checksum algorithm
[   31.979960] BTRFS info (device nvme0n1p6): setting nodatasum
[   31.979966] BTRFS info (device nvme0n1p6): using free space tree
[   31.986162] BTRFS info (device nvme0n1p6): enabling ssd optimizations
[   31.986167] BTRFS info (device nvme0n1p6): auto enabling async discard
[   33.244674] alg: No test for hmac(md4) (hmac(md4-generic))
[   33.326946] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   33.343563] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   34.562526] Bluetooth: Core ver 2.22
[   34.562594] NET: Registered PF_BLUETOOTH protocol family
[   34.562597] Bluetooth: HCI device and connection manager initialized
[   34.562601] Bluetooth: HCI socket layer initialized
[   34.562604] Bluetooth: L2CAP socket layer initialized
[   34.562609] Bluetooth: SCO socket layer initialized
[   34.570936] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   34.570942] Bluetooth: BNEP filters: protocol multicast
[   34.570949] Bluetooth: BNEP socket layer initialized
[   37.117053] zram: Added device: zram0
[   37.117384] zram: Added device: zram1
[   37.117650] zram: Added device: zram2
[   37.170158] zram2: detected capacity change from 0 to 50331648
[   37.624417] BTRFS: device label var_tmp_dir devid 1 transid 6 /dev/zram2 scanned by mkfs.btrfs (2414)
[   37.631009] BTRFS info (device zram2): using crc32c (crc32c-intel) checksum algorithm
[   37.631030] BTRFS info (device zram2): setting nodatasum
[   37.631035] BTRFS info (device zram2): using free space tree
[   37.633556] BTRFS info (device zram2): enabling ssd optimizations
[   37.633570] BTRFS info (device zram2): auto enabling async discard
[   37.633700] BTRFS info (device zram2): checking UUID tree
[   38.018878] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full
[   48.045155] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full
[   58.072096] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full
[   73.005102] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full
[   73.954031] fuse: init (API version 7.38)
[   74.229139] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=2537 'mate-session-ch'
[   88.151739] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full
[  103.084986] alx 0000:05:00.0 enp5s0: NIC Up: 100 Mbps Full

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: When VIA VL805/806 xHCI USB 3.0 Controller is present Atheros E2400 (alx) ethernet does not work: NETDEV WATCHDOG: enp5s0 (alx): transmit queue 2 timed out
  2023-03-19  0:37 When VIA VL805/806 xHCI USB 3.0 Controller is present Atheros E2400 (alx) ethernet does not work: NETDEV WATCHDOG: enp5s0 (alx): transmit queue 2 timed out Erhard Furtner
@ 2023-03-20  9:26 ` Mathias Nyman
  2023-03-21 19:50   ` Erhard Furtner
  2023-03-26 15:58   ` Erhard Furtner
  0 siblings, 2 replies; 6+ messages in thread
From: Mathias Nyman @ 2023-03-20  9:26 UTC (permalink / raw)
  To: Erhard Furtner, linux-usb; +Cc: Mathias Nyman, Chris Snook, stable

On 19.3.2023 2.37, Erhard Furtner wrote:
> Greetings!
> 
> On my GIGABYTE GA-970-Gaming board (AM3+ board + AMD FX8370 CPU) I got this very annoying problem that onboard ethernet Atheros E2400 (alx) ceases to work when the USB 3.0 controller (VIA VL805/806 chipset) is enabled in BIOS.
> 
>   # lspci
> 02:00.0 USB controller: ASMedia Technology Inc. ASM2142/ASM3142 USB 3.1 Host Controller
> 06:00.0 USB controller: VIA Technologies, Inc. VL805/806 xHCI USB 3.0 Controller (rev 01)

dmesg shows usb bus numbers are not ordered, xhci driver registers two usb buses per host.

xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:06:00.0: can't setup: -110

> 
> With the VIA VL805/806 USB-Controller disabled in BIOS I don't get this problem, everything works fine. But this way I loose front USB 3 ports... The other ASMedia USB 3.1 controller works fine without hampering the system.
> 
> Don't know whether this is a regression - the problem shows up on current kernel 6.2.x or 6.1.x TLS too. Kernel dmesg + .config attached.
> 
> Regards,
> Erhard

This could be related to another case with two xHC controllers, but different vendors.
Bus numbers were interleaved there as well. Removing the asynch probe helped:

https://lore.kernel.org/linux-usb/d5ff9480-57bd-2c39-8b10-988ad0d14a7e@linux.intel.com/

Does reverting:
4c2604a9a689 usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS
help for you?

Thanks
Mathias

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: When VIA VL805/806 xHCI USB 3.0 Controller is present Atheros E2400 (alx) ethernet does not work: NETDEV WATCHDOG: enp5s0 (alx): transmit queue 2 timed out
  2023-03-20  9:26 ` Mathias Nyman
@ 2023-03-21 19:50   ` Erhard Furtner
  2023-03-26 15:58   ` Erhard Furtner
  1 sibling, 0 replies; 6+ messages in thread
From: Erhard Furtner @ 2023-03-21 19:50 UTC (permalink / raw)
  To: Mathias Nyman; +Cc: linux-usb, Mathias Nyman, Chris Snook, stable

On Mon, 20 Mar 2023 11:26:39 +0200
Mathias Nyman <mathias.nyman@linux.intel.com> wrote:

> This could be related to another case with two xHC controllers, but different vendors.
> Bus numbers were interleaved there as well. Removing the asynch probe helped:
> 
> https://lore.kernel.org/linux-usb/d5ff9480-57bd-2c39-8b10-988ad0d14a7e@linux.intel.com/
> 
> Does reverting:
> 4c2604a9a689 usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS
> help for you?

Thanks for the hint Mathias! I'll check that out and report back. Which may take some weeks as this system is located at my parents home.

Regards,
Erhard

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: When VIA VL805/806 xHCI USB 3.0 Controller is present Atheros E2400 (alx) ethernet does not work: NETDEV WATCHDOG: enp5s0 (alx): transmit queue 2 timed out
  2023-03-20  9:26 ` Mathias Nyman
  2023-03-21 19:50   ` Erhard Furtner
@ 2023-03-26 15:58   ` Erhard Furtner
  2023-03-29  9:51     ` Mathias Nyman
  1 sibling, 1 reply; 6+ messages in thread
From: Erhard Furtner @ 2023-03-26 15:58 UTC (permalink / raw)
  To: Mathias Nyman; +Cc: linux-usb, Chris Snook, stable

[-- Attachment #1: Type: text/plain, Size: 621 bytes --]

On Mon, 20 Mar 2023 11:26:39 +0200
Mathias Nyman <mathias.nyman@linux.intel.com> wrote:

> This could be related to another case with two xHC controllers, but different vendors.
> Bus numbers were interleaved there as well. Removing the asynch probe helped:
> 
> https://lore.kernel.org/linux-usb/d5ff9480-57bd-2c39-8b10-988ad0d14a7e@linux.intel.com/
> 
> Does reverting:
> 4c2604a9a689 usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS
> help for you?

Ok, reverted 4c2604a9a689 usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS now but unfortunately didn't work out. New dmesg with the reverted commit attached.

Regards,
Erhard

[-- Attachment #2: dmesg_63-rc3.txt --]
[-- Type: text/plain, Size: 63717 bytes --]

[    0.000000] Linux version 6.3.0-rc3-bdver2-dirty (root@outsider) (clang version 15.0.7, LLD 15.0.7) #2 SMP Sun Mar 26 17:39:00 CEST 2023
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc3-bdver2-dirty root=/dev/nvme0n1p4 ro psmouse.synaptics_intertouch=1 zswap.max_pool_percent=16 zswap.zpool=z3fold slub_debug=FZP page_poison=1 netconsole=6666@10.0.0.14/eth0,6666@10.0.0.3/70:85:C2:30:EC:01
[    0.000000] KERNEL supported cpus:
[    0.000000]   AMD AuthenticAMD
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce1fefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ce1ff000-0x00000000ce240fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ce241000-0x00000000ce250fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ce251000-0x00000000ce640fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ce641000-0x00000000cf0f1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf0f2000-0x00000000cf155fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000cf156000-0x00000000cf156fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf157000-0x00000000cf35cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf35d000-0x00000000cf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000082effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.3.1 by American Megatrends
[    0.000000] efi: ACPI=0xce249000 ACPI 2.0=0xce249000 SMBIOS=0xf04c0 
[    0.000000] efi: Remove mem44: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[    0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[    0.000000] efi: Not removing mem45: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem46: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem47: MMIO range=[0xfec20000-0xfec20fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem48: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem49: MMIO range=[0xfed61000-0xfed70fff] (64KB) from e820 map
[    0.000000] efi: Not removing mem50: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[    0.000000] efi: Remove mem51: MMIO range=[0xfef00000-0xffffffff] (17MB) from e820 map
[    0.000000] e820: remove [mem 0xfef00000-0xffffffff] reserved
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970-GAMING, BIOS F2 04/06/2016
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 4018.800 MHz processor
[    0.001013] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001037] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001059] last_pfn = 0x82f000 max_arch_pfn = 0x400000000
[    0.001079] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001734] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[    0.001741] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[    0.001759] Using GB pages for direct mapping
[    0.002304] Secure boot disabled
[    0.002306] ACPI: Early table checksum verification disabled
[    0.002310] ACPI: RSDP 0x00000000CE249000 000024 (v02 ALASKA)
[    0.002314] ACPI: XSDT 0x00000000CE249070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.002319] ACPI: FACP 0x00000000CE24E998 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.002323] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-615)
[    0.002327] ACPI: DSDT 0x00000000CE249158 005839 (v02 ALASKA A M I    00000088 INTL 20051117)
[    0.002330] ACPI: FACS 0x00000000CE63BF80 000040
[    0.002333] ACPI: APIC 0x00000000CE24EA90 00009E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.002336] ACPI: FPDT 0x00000000CE24EB30 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.002338] ACPI: MCFG 0x00000000CE24EB78 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.002341] ACPI: HPET 0x00000000CE24EBB8 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.002344] ACPI: SSDT 0x00000000CE24EBF0 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.002347] ACPI: IVRS 0x00000000CE250308 0000D8 (v01 AMD    RD890S   00202031 AMD  00000000)
[    0.002349] ACPI: Reserving FACP table memory at [mem 0xce24e998-0xce24ea8b]
[    0.002351] ACPI: Reserving DSDT table memory at [mem 0xce249158-0xce24e990]
[    0.002352] ACPI: Reserving FACS table memory at [mem 0xce63bf80-0xce63bfbf]
[    0.002353] ACPI: Reserving APIC table memory at [mem 0xce24ea90-0xce24eb2d]
[    0.002354] ACPI: Reserving FPDT table memory at [mem 0xce24eb30-0xce24eb73]
[    0.002355] ACPI: Reserving MCFG table memory at [mem 0xce24eb78-0xce24ebb3]
[    0.002356] ACPI: Reserving HPET table memory at [mem 0xce24ebb8-0xce24ebef]
[    0.002357] ACPI: Reserving SSDT table memory at [mem 0xce24ebf0-0xce250303]
[    0.002358] ACPI: Reserving IVRS table memory at [mem 0xce250308-0xce2503df]
[    0.002401] Zone ranges:
[    0.002402]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002404]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.002406]   Normal   [mem 0x0000000100000000-0x000000082effffff]
[    0.002407] Movable zone start for each node
[    0.002408] Early memory node ranges
[    0.002408]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.002410]   node   0: [mem 0x0000000000100000-0x00000000ce1fefff]
[    0.002411]   node   0: [mem 0x00000000cf156000-0x00000000cf156fff]
[    0.002412]   node   0: [mem 0x00000000cf35d000-0x00000000cf7fffff]
[    0.002413]   node   0: [mem 0x0000000100001000-0x000000082effffff]
[    0.002417] Initmem setup node 0 [mem 0x0000000000001000-0x000000082effffff]
[    0.002423] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.002464] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.003333] On node 0, zone DMA32: 3927 pages in unavailable ranges
[    0.003333] On node 0, zone DMA32: 518 pages in unavailable ranges
[    0.003333] On node 0, zone Normal: 2049 pages in unavailable ranges
[    0.003333] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.003333] ACPI: PM-Timer IO Port: 0x808
[    0.003333] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.003333] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[    0.003333] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[    0.003333] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.003333] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.003333] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.003333] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.003333] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.003333] [mem 0xcf800000-0xfebfffff] available for PCI devices
[    0.003333] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.003333] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.003333] percpu: Embedded 41 pages/cpu s128760 r8192 d30984 u262144
[    0.003333] pcpu-alloc: s128760 r8192 d30984 u262144 alloc=1*2097152
[    0.003333] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.003333] Built 1 zonelists, mobility grouping on.  Total pages: 8246855
[    0.003333] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc3-bdver2-dirty root=/dev/nvme0n1p4 ro psmouse.synaptics_intertouch=1 zswap.max_pool_percent=16 zswap.zpool=z3fold slub_debug=FZP page_poison=1 netconsole=6666@10.0.0.14/eth0,6666@10.0.0.3/70:85:C2:30:EC:01
[    0.003333] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc3-bdver2-dirty", will be passed to user space.
[    0.003333] printk: log_buf_len individual max cpu contribution: 8192 bytes
[    0.003333] printk: log_buf_len total cpu_extra contributions: 57344 bytes
[    0.003333] printk: log_buf_len min size: 65536 bytes
[    0.003333] printk: log_buf_len: 131072 bytes
[    0.003333] printk: early log buf free: 57008(86%)
[    0.003333] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.003333] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.003333] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off
[    0.003333] software IO TLB: area num 8.
[    0.003333] Memory: 3395680K/33511684K available (10240K kernel code, 631K rwdata, 2388K rodata, 1060K init, 1540K bss, 846536K reserved, 0K cma-reserved)
[    0.003333] **********************************************************
[    0.003333] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.003333] **                                                      **
[    0.003333] ** This system shows unhashed kernel memory addresses   **
[    0.003333] ** via the console, logs, and other interfaces. This    **
[    0.003333] ** might reduce the security of your system.            **
[    0.003333] **                                                      **
[    0.003333] ** If you see this message and you are not debugging    **
[    0.003333] ** the kernel, report this immediately to your system   **
[    0.003333] ** administrator!                                       **
[    0.003333] **                                                      **
[    0.003333] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.003333] **********************************************************
[    0.003333] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.003333] rcu: Hierarchical RCU implementation.
[    0.003333] 	Tracing variant of Tasks RCU enabled.
[    0.003333] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.003333] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 16
[    0.003333] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.003333] kfence: initialized - using 2097152 bytes for 255 objects at 0xffff8c588ba00000-0xffff8c588bc00000
[    0.003333] Console: colour dummy device 80x25
[    0.003333] printk: console [tty0] enabled
[    0.003333] ACPI: Core revision 20221020
[    0.003333] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.003333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39edbc03e43, max_idle_ns: 440795229915 ns
[    0.643338] Calibrating delay loop (skipped), value calculated using timer frequency.. 8040.50 BogoMIPS (lpj=13396000)
[    0.643343] pid_max: default: 32768 minimum: 301
[    0.679751] LSM: initializing lsm=capability,yama
[    0.679764] Yama: becoming mindful.
[    0.679970] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.680113] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.680554] LVT offset 1 assigned for vector 0xf9
[    0.680562] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.680565] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.680572] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.680577] Spectre V2 : Mitigation: Retpolines
[    0.680580] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.680583] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.680585] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.680587] RETBleed: Mitigation: untrained return thunk
[    0.680591] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.680596] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.684174] Freeing SMP alternatives memory: 32K
[    0.791133] smpboot: CPU0: AMD FX-8370 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.791381] cblist_init_generic: Setting adjustable number of callback queues.
[    0.791386] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.791416] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.791436] ... version:                0
[    0.791438] ... bit width:              48
[    0.791441] ... generic registers:      6
[    0.791443] ... value mask:             0000ffffffffffff
[    0.791445] ... max period:             00007fffffffffff
[    0.791448] ... fixed-purpose events:   0
[    0.791450] ... event mask:             000000000000003f
[    0.791543] rcu: Hierarchical SRCU implementation.
[    0.791546] rcu: 	Max phase no-delay instances is 1000.
[    0.791617] MCE: In-kernel MCE decoding enabled.
[    0.791695] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.791847] smp: Bringing up secondary CPUs ...
[    0.792000] x86: Booting SMP configuration:
[    0.792003] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.852306] smp: Brought up 1 node, 8 CPUs
[    0.852306] smpboot: Max logical packages: 1
[    0.852306] smpboot: Total of 8 processors activated (64326.00 BogoMIPS)
[    4.441562] node 0 deferred pages initialised in 3587ms
[    4.458451] allocated 67108864 bytes of page_ext
[    4.458823] devtmpfs: initialized
[    4.458823] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    4.458823] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    4.458823] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    4.460067] thermal_sys: Registered thermal governor 'step_wise'
[    4.460068] thermal_sys: Registered thermal governor 'user_space'
[    4.460089] cpuidle: using governor menu
[    4.460116] PCI: Using configuration type 1 for base access
[    4.460116] PCI: Using configuration type 1 for extended access
[    4.460509] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    4.460509] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    4.460509] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    4.460509] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    4.516670] raid6: sse2x4   gen()  9928 MB/s
[    4.573336] raid6: sse2x2   gen()  8383 MB/s
[    4.630003] raid6: sse2x1   gen()  6911 MB/s
[    4.630006] raid6: using algorithm sse2x4 gen() 9928 MB/s
[    4.686671] raid6: .... xor() 4163 MB/s, rmw enabled
[    4.686674] raid6: using ssse3x2 recovery algorithm
[    4.686843] ACPI: Added _OSI(Module Device)
[    4.686846] ACPI: Added _OSI(Processor Device)
[    4.686849] ACPI: Added _OSI(3.0 _SCP Extensions)
[    4.686852] ACPI: Added _OSI(Processor Aggregator Device)
[    4.699470] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    4.702271] ACPI: Interpreter enabled
[    4.702282] ACPI: PM: (supports S0 S5)
[    4.702285] ACPI: Using IOAPIC for interrupt routing
[    4.702624] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    4.702628] PCI: Using E820 reservations for host bridge windows
[    4.703147] ACPI: Enabled 10 GPEs in block 00 to 1F
[    4.718592] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    4.718601] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    4.718615] acpi PNP0A08:00: _OSC: OS requested [PME AER PCIeCapability LTR]
[    4.718619] acpi PNP0A08:00: _OSC: platform willing to grant [PME AER PCIeCapability LTR]
[    4.718623] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
[    4.719105] PCI host bridge to bus 0000:00
[    4.719109] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    4.719114] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    4.719118] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    4.719121] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    4.719125] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    4.719130] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
[    4.719134] pci_bus 0000:00: root bus resource [bus 00-ff]
[    4.719166] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    4.719312] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[    4.719464] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    4.719512] pci 0000:00:02.0: enabling Extended Tags
[    4.719541] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    4.719673] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[    4.719691] pci 0000:00:04.0: enabling Extended Tags
[    4.719719] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    4.719846] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
[    4.719865] pci 0000:00:06.0: enabling Extended Tags
[    4.719892] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    4.720013] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[    4.720032] pci 0000:00:09.0: enabling Extended Tags
[    4.720059] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    4.720200] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    4.720214] pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
[    4.720223] pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
[    4.720232] pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
[    4.720241] pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
[    4.720250] pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
[    4.720259] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
[    4.720399] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    4.720414] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
[    4.720578] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    4.720592] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
[    4.720656] pci 0000:00:12.2: supports D1 D2
[    4.720659] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    4.720774] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    4.720788] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
[    4.720943] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    4.720958] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
[    4.721022] pci 0000:00:13.2: supports D1 D2
[    4.721025] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    4.721140] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    4.721306] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    4.721324] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[    4.721378] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    4.721490] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    4.721681] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    4.721816] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    4.721831] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
[    4.721987] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    4.722019] pci 0000:00:15.0: enabling Extended Tags
[    4.722059] pci 0000:00:15.0: supports D1 D2
[    4.722184] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    4.722215] pci 0000:00:15.1: enabling Extended Tags
[    4.722254] pci 0000:00:15.1: supports D1 D2
[    4.722390] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    4.722405] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
[    4.722550] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    4.722565] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
[    4.722629] pci 0000:00:16.2: supports D1 D2
[    4.722632] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    4.722750] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    4.722819] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    4.722899] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    4.722965] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    4.723044] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    4.723113] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    4.723243] pci 0000:01:00.0: [1002:6758] type 00 class 0x030000
[    4.723261] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.723274] pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit]
[    4.723283] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    4.723297] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
[    4.723305] pci 0000:01:00.0: enabling Extended Tags
[    4.723325] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    4.723363] pci 0000:01:00.0: supports D1 D2
[    4.723462] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300
[    4.723480] pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit]
[    4.723515] pci 0000:01:00.1: enabling Extended Tags
[    4.723564] pci 0000:01:00.1: supports D1 D2
[    4.723675] pci 0000:00:02.0: PCI bridge to [bus 01]
[    4.723680] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    4.723684] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    4.723689] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.723744] pci 0000:02:00.0: [1b21:2142] type 00 class 0x0c0330
[    4.723762] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
[    4.723801] pci 0000:02:00.0: enabling Extended Tags
[    4.723860] pci 0000:02:00.0: PME# supported from D0
[    4.723892] pci 0000:02:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:04.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[    4.723975] pci 0000:00:04.0: PCI bridge to [bus 02]
[    4.723981] pci 0000:00:04.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    4.724043] pci 0000:03:00.0: [15b7:5009] type 00 class 0x010802
[    4.724061] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe803fff 64bit]
[    4.724085] pci 0000:03:00.0: reg 0x20: [mem 0xfe804000-0xfe8040ff 64bit]
[    4.724202] pci 0000:03:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:06.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    4.724306] pci 0000:00:06.0: PCI bridge to [bus 03]
[    4.724311] pci 0000:00:06.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    4.724393] pci 0000:04:00.0: [1b21:1343] type 00 class 0x0c0330
[    4.724411] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit]
[    4.724450] pci 0000:04:00.0: enabling Extended Tags
[    4.724514] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    4.724694] pci 0000:00:09.0: PCI bridge to [bus 04]
[    4.724699] pci 0000:00:09.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    4.724712] pci_bus 0000:05: extended config space not accessible
[    4.724771] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[    4.724779] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    4.724784] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    4.724788] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    4.724792] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    4.724796] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
[    4.724801] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
[    4.724870] pci 0000:06:00.0: [1969:e0a1] type 00 class 0x020000
[    4.724897] pci 0000:06:00.0: reg 0x10: [mem 0xfe600000-0xfe63ffff 64bit]
[    4.724909] pci 0000:06:00.0: reg 0x18: [io  0xd000-0xd07f]
[    4.724968] pci 0000:06:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    4.725028] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.725152] pci 0000:00:15.0: PCI bridge to [bus 06]
[    4.725158] pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
[    4.725163] pci 0000:00:15.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    4.725225] pci 0000:07:00.0: [1106:3483] type 00 class 0x0c0330
[    4.725246] pci 0000:07:00.0: reg 0x10: [mem 0xfe500000-0xfe500fff 64bit]
[    4.725337] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.725425] pci 0000:00:15.1: PCI bridge to [bus 07]
[    4.725432] pci 0000:00:15.1:   bridge window [mem 0xfe500000-0xfe5fffff]
[    4.725461] pci_bus 0000:00: on NUMA node 0
[    4.726359] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    4.726518] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    4.726686] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    4.726876] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    4.727018] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    4.727130] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    4.727241] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    4.727359] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    4.727611] iommu: Default domain type: Translated 
[    4.727614] iommu: DMA domain TLB invalidation policy: lazy mode 
[    4.727792] SCSI subsystem initialized
[    4.727824] libata version 3.00 loaded.
[    4.727861] EDAC MC: Ver: 3.0.0
[    4.727971] efivars: Registered efivars operations
[    4.727971] PCI: Using ACPI for IRQ routing
[    4.727971] PCI: pci_cache_line_size set to 64 bytes
[    4.727971] e820: reserve RAM buffer [mem 0xce1ff000-0xcfffffff]
[    4.727971] e820: reserve RAM buffer [mem 0xcf157000-0xcfffffff]
[    4.727971] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[    4.727971] e820: reserve RAM buffer [mem 0x82f000000-0x82fffffff]
[    4.727971] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    4.727971] pci 0000:01:00.0: vgaarb: bridge control possible
[    4.727971] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    4.727971] vgaarb: loaded
[    4.727971] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    4.727971] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    4.730091] clocksource: Switched to clocksource tsc-early
[    4.730423] pnp: PnP ACPI init
[    4.730590] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    4.731195] system 00:01: [io  0x040b] has been reserved
[    4.731200] system 00:01: [io  0x04d6] has been reserved
[    4.731204] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    4.731208] system 00:01: [io  0x0c14] has been reserved
[    4.731212] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    4.731216] system 00:01: [io  0x0c52] has been reserved
[    4.731220] system 00:01: [io  0x0c6c] has been reserved
[    4.731224] system 00:01: [io  0x0c6f] has been reserved
[    4.731228] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    4.731231] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    4.731241] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    4.731245] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    4.731249] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    4.731252] system 00:01: [io  0x0800-0x089f] has been reserved
[    4.731256] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    4.731260] system 00:01: [io  0x0900-0x090f] has been reserved
[    4.731264] system 00:01: [io  0x0910-0x091f] has been reserved
[    4.731267] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    4.731273] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    4.731278] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    4.731286] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    4.731291] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    4.731296] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    4.731301] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    4.731306] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[    4.731660] system 00:02: [io  0x0220-0x0227] has been reserved
[    4.731665] system 00:02: [io  0x0228-0x0237] has been reserved
[    4.731672] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    4.732201] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    4.732530] system 00:06: [mem 0xfeb20000-0xfeb23fff] has been reserved
[    4.732704] system 00:07: [mem 0xfec20000-0xfec200ff] could not be reserved
[    4.732965] pnp: PnP ACPI: found 8 devices
[    4.740543] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    4.740601] NET: Registered PF_INET protocol family
[    4.741172] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    4.744368] tcp_listen_portaddr_hash hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    4.744468] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    4.744872] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    4.745842] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes, linear)
[    4.746792] TCP: Hash tables configured (established 262144 bind 65536)
[    4.747306] UDP hash table entries: 16384 (order: 8, 1572864 bytes, linear)
[    4.747855] UDP-Lite hash table entries: 16384 (order: 8, 1572864 bytes, linear)
[    4.748051] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    4.748084] pci 0000:00:02.0: PCI bridge to [bus 01]
[    4.748090] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    4.748095] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    4.748099] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.748104] pci 0000:00:04.0: PCI bridge to [bus 02]
[    4.748108] pci 0000:00:04.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    4.748113] pci 0000:00:06.0: PCI bridge to [bus 03]
[    4.748117] pci 0000:00:06.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    4.748122] pci 0000:00:09.0: PCI bridge to [bus 04]
[    4.748126] pci 0000:00:09.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    4.748132] pci 0000:00:14.4: PCI bridge to [bus 05]
[    4.748142] pci 0000:00:15.0: PCI bridge to [bus 06]
[    4.748145] pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
[    4.748150] pci 0000:00:15.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    4.748157] pci 0000:00:15.1: PCI bridge to [bus 07]
[    4.748162] pci 0000:00:15.1:   bridge window [mem 0xfe500000-0xfe5fffff]
[    4.748170] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    4.748174] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    4.748177] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    4.748180] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    4.748183] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    4.748186] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xffffffff window]
[    4.748190] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    4.748193] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    4.748196] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.748199] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    4.748203] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[    4.748206] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
[    4.748210] pci_bus 0000:05: resource 4 [io  0x0000-0x03af window]
[    4.748213] pci_bus 0000:05: resource 5 [io  0x03e0-0x0cf7 window]
[    4.748216] pci_bus 0000:05: resource 6 [io  0x03b0-0x03df window]
[    4.748219] pci_bus 0000:05: resource 7 [io  0x0d00-0xffff window]
[    4.748222] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000dffff window]
[    4.748225] pci_bus 0000:05: resource 9 [mem 0xd0000000-0xffffffff window]
[    4.748229] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
[    4.748232] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff]
[    4.748235] pci_bus 0000:07: resource 1 [mem 0xfe500000-0xfe5fffff]
[    4.750292] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    4.750302] pci 0000:02:00.0: PME# does not work under D0, disabling it
[    4.751093] PCI: CLS 64 bytes, default 64
[    4.751175] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    4.752506] pci 0000:00:00.0: Adding to iommu group 0
[    4.752533] pci 0000:00:02.0: Adding to iommu group 1
[    4.752554] pci 0000:00:04.0: Adding to iommu group 2
[    4.752575] pci 0000:00:06.0: Adding to iommu group 3
[    4.752599] pci 0000:00:09.0: Adding to iommu group 4
[    4.752620] pci 0000:00:11.0: Adding to iommu group 5
[    4.752655] pci 0000:00:12.0: Adding to iommu group 6
[    4.752677] pci 0000:00:12.2: Adding to iommu group 6
[    4.752720] pci 0000:00:13.0: Adding to iommu group 7
[    4.752739] pci 0000:00:13.2: Adding to iommu group 7
[    4.752765] pci 0000:00:14.0: Adding to iommu group 8
[    4.752790] pci 0000:00:14.2: Adding to iommu group 9
[    4.752823] pci 0000:00:14.3: Adding to iommu group 10
[    4.752843] pci 0000:00:14.4: Adding to iommu group 11
[    4.752872] pci 0000:00:14.5: Adding to iommu group 12
[    4.752906] pci 0000:00:15.0: Adding to iommu group 13
[    4.752927] pci 0000:00:15.1: Adding to iommu group 13
[    4.752961] pci 0000:00:16.0: Adding to iommu group 14
[    4.752986] pci 0000:00:16.2: Adding to iommu group 14
[    4.753032] pci 0000:01:00.0: Adding to iommu group 15
[    4.753055] pci 0000:01:00.1: Adding to iommu group 15
[    4.753076] pci 0000:02:00.0: Adding to iommu group 16
[    4.753101] pci 0000:03:00.0: Adding to iommu group 17
[    4.753123] pci 0000:04:00.0: Adding to iommu group 18
[    4.753132] pci 0000:06:00.0: Adding to iommu group 13
[    4.753141] pci 0000:07:00.0: Adding to iommu group 13
[    4.760961] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    4.761089] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    4.761092] software IO TLB: mapped [mem 0x00000000bf076000-0x00000000c3076000] (64MB)
[    4.761134] LVT offset 0 assigned for vector 0x400
[    4.761218] perf: AMD IBS detected (0x000000ff)
[    4.761796] Initialise system trusted keyrings
[    4.761866] workingset: timestamp_bits=46 max_order=23 bucket_order=0
[    4.762335] NET: Registered PF_ALG protocol family
[    4.762339] xor: automatically using best checksumming function   avx       
[    4.762343] Key type asymmetric registered
[    4.762346] Asymmetric key parser 'x509' registered
[    4.763681] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    4.763720] io scheduler kyber registered
[    4.766263] IPMI message handler: version 39.2
[    4.767716] ahci 0000:00:11.0: version 3.0
[    4.767812] nvme nvme0: pci function 0000:03:00.0
[    4.767915] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.767923] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
[    4.768361] scsi host0: ahci
[    4.768572] scsi host1: ahci
[    4.768673] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[    4.768678] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
[    4.779178] alx 0000:06:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [1c:1b:0d:93:c2:07]
[    4.779212] rtc_cmos 00:03: RTC can wake from S4
[    4.779426] rtc_cmos 00:03: registered as rtc0
[    4.779439] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    4.779510] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x300000 bytes
[    4.779514] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=1024x768x32, linelength=4096
[    4.781709] Console: switching to colour frame buffer device 128x48
[    4.783215] nvme nvme0: allocated 32 MiB host memory buffer.
[    4.783805] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    4.783969] NET: Registered PF_INET6 protocol family
[    4.784287] nvme nvme0: 8/0/0 default/read/poll queues
[    4.784500] Segment Routing with IPv6
[    4.784554] In-situ OAM (IOAM) with IPv6
[    4.784595] NET: Registered PF_PACKET protocol family
[    4.785414] microcode: microcode updated early to new patch_level=0x06000852
[    4.785484] microcode: CPU1: patch_level=0x06000852
[    4.785490] microcode: CPU0: patch_level=0x06000852
[    4.785490] microcode: CPU3: patch_level=0x06000852
[    4.785493] microcode: CPU5: patch_level=0x06000852
[    4.785494] microcode: CPU6: patch_level=0x06000852
[    4.785502] microcode: CPU2: patch_level=0x06000852
[    4.785572] microcode: CPU4: patch_level=0x06000852
[    4.785579] microcode: CPU7: patch_level=0x06000852
[    4.785674] microcode: Microcode Update Driver: v2.2.
[    4.785678] IPI shorthand broadcast: enabled
[    4.788826] sched_clock: Marking stable (4163339239, 623336192)->(4798354889, -11679458)
[    4.789017] registered taskstats version 1
[    4.789131]  nvme0n1: p1 p2 p3 p4 p5 p6
[    4.789309] Loading compiled-in X.509 certificates
[    4.795458] zswap: loaded using pool zstd/z3fold
[    4.801843] debug_vm_pgtable: [debug_vm_pgtable         ]: Validating architecture page table helpers
[    5.079810] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.080669] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.082255] ata1.00: ATA-9: HP SSD S700 Pro 1TB, R0201B, max UDMA/100
[    5.083065] ata1.00: 2000409264 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    5.083896] ata2.00: ATAPI: PIONEER BD-RW   BDR-208D, 1.50, max UDMA/100
[    5.084990] ata1.00: Features: Dev-Sleep
[    5.086247] ata1.00: configured for UDMA/100
[    5.087241] scsi 0:0:0:0: Direct-Access     ATA      HP SSD S700 Pro  1B   PQ: 0 ANSI: 5
[    5.088151] ata2.00: configured for UDMA/100
[    5.088583] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
[    5.089760] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    5.090576] sd 0:0:0:0: [sda] Write Protect is off
[    5.091340] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.091356] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.092177] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    5.094683]  sda: sda1
[    5.095560] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    5.100218] scsi 1:0:0:0: CD-ROM            PIONEER  BD-RW   BDR-208D 1.50 PQ: 0 ANSI: 5
[    5.185414] Btrfs loaded, crc32c=crc32c-intel, zoned=no, fsverity=no
[    5.367361] netpoll: netconsole: local port 6666
[    5.368157] netpoll: netconsole: local IPv4 address 10.0.0.14
[    5.368938] netpoll: netconsole: interface 'eth0'
[    5.369673] netpoll: netconsole: remote port 6666
[    5.370420] netpoll: netconsole: remote IPv4 address 10.0.0.3
[    5.371155] netpoll: netconsole: remote ethernet address 70:85:c2:30:ec:01
[    5.371863] netpoll: netconsole: device eth0 not up yet, forcing it
[    5.770008] tsc: Refined TSC clocksource calibration: 4018.625 MHz
[    5.770716] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39ed1687aa7, max_idle_ns: 440795234189 ns
[    5.771505] clocksource: Switched to clocksource tsc
[    6.252194] alx 0000:06:00.0 eth0: NIC Up: 100 Mbps Full
[    6.253141] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.254161] printk: console [netcon0] enabled
[    6.260155] netconsole: network logging started
[    6.261996] BTRFS: device label bdver2_musl devid 1 transid 98056 /dev/root scanned by swapper/0 (1)
[    6.262980] BTRFS info (device nvme0n1p4): using xxhash64 (xxhash64-generic) checksum algorithm
[    6.263777] BTRFS info (device nvme0n1p4): using free space tree
[    6.270280] BTRFS info (device nvme0n1p4): enabling ssd optimizations
[    6.271082] BTRFS info (device nvme0n1p4): auto enabling async discard
[    6.272649] VFS: Mounted root (btrfs filesystem) readonly on device 0:16.
[    6.274175] devtmpfs: mounted
[    6.275380] Freeing unused kernel image (initmem) memory: 1060K
[    6.286698] Write protecting the kernel read-only data: 14336k
[    6.288114] Freeing unused kernel image (rodata/data gap) memory: 1708K
[    6.291248] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    6.292124] rodata_test: all tests were successful
[    6.292970] kallsyms_selftest: start
[    6.292974] Run /sbin/init as init process
[    6.294706]   with arguments:
[    6.294707]     /sbin/init
[    6.294708]   with environment:
[    6.294710]     HOME=/
[    6.294711]     TERM=linux
[    6.294712]     BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc3-bdver2-dirty
[    7.826610] kallsyms_selftest:  ---------------------------------------------------------
[    7.827325] kallsyms_selftest: | nr_symbols | compressed size | original size | ratio(%) |
[    7.828068] kallsyms_selftest: |---------------------------------------------------------|
[    7.828822] kallsyms_selftest: |      34969 |        380937   |       655579  |  58.10   |
[    7.828828] kallsyms_selftest:  ---------------------------------------------------------
[    8.060246] kallsyms_selftest: kallsyms_lookup_name() looked up 34969 symbols
[    8.060250] kallsyms_selftest: The time spent on each symbol is (ns): min=1059, max=25595, avg=6460
[    8.064434] kallsyms_selftest: kallsyms_on_each_symbol() traverse all: 4180780 ns
[    8.064443] kallsyms_selftest: kallsyms_on_each_match_symbol() traverse all: 6817 ns
[    8.064445] kallsyms_selftest: finish
[    8.084090] ACPI: \_PR_.P001: Found 2 idle states
[    8.085559] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    8.085566] ACPI: button: Power Button [PWRB]
[    8.087626] ACPI: \_PR_.P002: Found 2 idle states
[    8.088036] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    8.088042] ACPI: button: Power Button [PWRF]
[    8.089926] ACPI: bus type USB registered
[    8.090001] usbcore: registered new interface driver usbfs
[    8.090040] usbcore: registered new interface driver hub
[    8.090077] usbcore: registered new device driver usb
[    8.093854] ACPI: \_PR_.P003: Found 2 idle states
[    8.097176] ACPI: \_PR_.P004: Found 2 idle states
[    8.099415] QUIRK: Enable AMD PLL fix
[    8.099440] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    8.099561] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    8.102182] ACPI: \_PR_.P005: Found 2 idle states
[    8.103855] ACPI: \_PR_.P006: Found 2 idle states
[    8.104691] ACPI: \_PR_.P007: Found 2 idle states
[    8.108897] ACPI: \_PR_.P008: Found 2 idle states
[    8.111716] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    8.111757] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[    8.116422] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    8.136032] alx 0000:06:00.0 enp6s0: renamed from eth0 (while UP)
[    8.141671] cryptd: max_cpu_qlen set to 1000
[    8.154520] xhci_hcd 0000:02:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010
[    8.154926] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    8.154933] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
[    8.154939] ehci-pci 0000:00:13.2: EHCI Host Controller
[    8.154941] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    8.154955] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 3
[    8.154964] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    8.154973] ehci-pci 0000:00:13.2: debug port 1
[    8.155034] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    8.155038] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.155041] usb usb1: Product: xHCI Host Controller
[    8.155042] usb usb1: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty xhci-hcd
[    8.155044] usb usb1: SerialNumber: 0000:02:00.0
[    8.155064] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
[    8.155274] hub 1-0:1.0: USB hub found
[    8.155290] hub 1-0:1.0: 2 ports detected
[    8.155494] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    8.155552] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[    8.155555] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.155557] usb usb2: Product: xHCI Host Controller
[    8.155559] usb usb2: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty xhci-hcd
[    8.155560] usb usb2: SerialNumber: 0000:02:00.0
[    8.155755] hub 2-0:1.0: USB hub found
[    8.155769] hub 2-0:1.0: 2 ports detected
[    8.157912] BTRFS: device label ubuntu devid 1 transid 869 /dev/nvme0n1p3 scanned by (udev-worker) (699)
[    8.162604] BTRFS info: devid 1 device path /dev/root changed to /dev/nvme0n1p4 scanned by (udev-worker) (689)
[    8.170294] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    8.170409] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    8.170412] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.170415] usb usb3: Product: EHCI Host Controller
[    8.170416] usb usb3: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ehci_hcd
[    8.170418] usb usb3: SerialNumber: 0000:00:13.2
[    8.170682] hub 3-0:1.0: USB hub found
[    8.170703] hub 3-0:1.0: 5 ports detected
[    8.171087] ehci-pci 0000:00:16.2: EHCI Host Controller
[    8.171109] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 4
[    8.171117] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    8.171126] ehci-pci 0000:00:16.2: debug port 1
[    8.171177] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000
[    8.171927] BTRFS: device label bisect_x86-64-v2 devid 1 transid 34531 /dev/nvme0n1p5 scanned by (udev-worker) (699)
[    8.176471] BTRFS: device label distfiles devid 1 transid 30 /dev/nvme0n1p6 scanned by (udev-worker) (689)
[    8.186692] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[    8.186821] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    8.186834] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.186838] usb usb4: Product: EHCI Host Controller
[    8.186840] usb usb4: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ehci_hcd
[    8.186843] usb usb4: SerialNumber: 0000:00:16.2
[    8.187131] hub 4-0:1.0: USB hub found
[    8.187163] hub 4-0:1.0: 4 ports detected
[    8.187558] ehci-pci 0000:00:12.2: EHCI Host Controller
[    8.187568] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 5
[    8.187576] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    8.187585] ehci-pci 0000:00:12.2: debug port 1
[    8.187642] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[    8.189106] AVX version of gcm_enc/dec engaged.
[    8.189148] AES CTR mode by8 optimization enabled
[    8.203356] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    8.203496] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    8.203501] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.203503] usb usb5: Product: EHCI Host Controller
[    8.203505] usb usb5: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ehci_hcd
[    8.203507] usb usb5: SerialNumber: 0000:00:12.2
[    8.203724] hub 5-0:1.0: USB hub found
[    8.203742] hub 5-0:1.0: 5 ports detected
[    8.204103] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    8.204104] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    8.204117] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[    8.204136] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 7
[    8.204175] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[    8.209979] acpi_cpufreq: overriding BIOS provided _PSD data
[    8.222852] ACPI: bus type drm_connector registered
[    8.263726] xhci_hcd 0000:04:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010
[    8.264149] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[    8.264157] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.264161] usb usb6: Product: OHCI PCI host controller
[    8.264166] usb usb6: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ohci_hcd
[    8.264169] usb usb6: SerialNumber: 0000:00:12.0
[    8.272362] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    8.278263] hub 6-0:1.0: USB hub found
[    8.278292] hub 6-0:1.0: 5 ports detected
[    8.285610] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[    8.285641] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input2
[    8.286260] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    8.286274] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    8.286279] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    8.286284] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    8.286287] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[    8.286291] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    8.286294] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    8.286298] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    8.286302] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    8.291025] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    8.291038] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
[    8.291091] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
[    8.291201] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 9
[    8.291241] xhci_hcd 0000:04:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    8.291358] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    8.291363] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.291368] usb usb7: Product: xHCI Host Controller
[    8.291372] usb usb7: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty xhci-hcd
[    8.291375] usb usb7: SerialNumber: 0000:04:00.0
[    8.298127] hub 7-0:1.0: USB hub found
[    8.298151] hub 7-0:1.0: 2 ports detected
[    8.300975] usb usb9: We don't know the algorithms for LPM for this host, disabling LPM.
[    8.301051] usb usb9: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[    8.301056] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.301059] usb usb9: Product: xHCI Host Controller
[    8.301062] usb usb9: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty xhci-hcd
[    8.301065] usb usb9: SerialNumber: 0000:04:00.0
[    8.306357] hub 9-0:1.0: USB hub found
[    8.306374] hub 9-0:1.0: 2 ports detected
[    8.306783] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    8.306791] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10
[    8.311622] xhci_hcd 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000e address=0xce210880 flags=0x0000]
[    8.312461] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[    8.313216] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[    8.313508] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[    8.314085] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[    8.314375] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[    8.315274] sr 1:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray
[    8.315283] cdrom: Uniform CD-ROM driver Revision: 3.20
[    8.316142] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[    8.316342] it87: Found IT8620E chip at 0x228, revision 4
[    8.316380] it87: Beeping is supported
[    8.316381] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[    8.317382] [drm] radeon kernel modesetting enabled.
[    8.320190] Console: switching to colour dummy device 80x25
[    8.321181] radeon 0000:01:00.0: vgaarb: deactivate vga console
[    8.327287] [drm] initializing kernel modesetting (TURKS 0x1002:0x6758 0x174B:0xE194 0x00).
[    8.327418] ATOM BIOS: TURKS
[    8.327624] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[    8.327628] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[    8.327634] [drm] Detected VRAM RAM=1024M, BAR=256M
[    8.327636] [drm] RAM width 128bits DDR
[    8.327722] [drm] radeon: 1024M of VRAM memory ready
[    8.327725] [drm] radeon: 1024M of GTT memory ready.
[    8.327737] [drm] Loading TURKS Microcode
[    8.329160] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    8.329270] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    8.333123] [drm] Internal thermal controller without fan control
[    8.337065] Asymmetric key parser 'pkcs8' registered
[    8.338317] [drm] radeon: dpm initialized
[    8.340102] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    8.341441] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    8.347562] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[    8.347676] radeon 0000:01:00.0: WB enabled
[    8.347679] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[    8.347681] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[    8.348424] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118
[    8.348785] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    8.348888] radeon 0000:01:00.0: radeon: using MSI.
[    8.348951] [drm] radeon: irq initialized.
[    8.350832] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[    8.350841] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.350845] usb usb8: Product: OHCI PCI host controller
[    8.350849] usb usb8: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ohci_hcd
[    8.350852] usb usb8: SerialNumber: 0000:00:13.0
[    8.351182] hub 8-0:1.0: USB hub found
[    8.351196] hub 8-0:1.0: 5 ports detected
[    8.351705] ohci-pci 0000:00:14.5: OHCI PCI host controller
[    8.351714] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 11
[    8.351753] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[    8.365702] [drm] ring test on 0 succeeded in 2 usecs
[    8.365717] [drm] ring test on 3 succeeded in 5 usecs
[    8.410986] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[    8.410993] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.410996] usb usb11: Product: OHCI PCI host controller
[    8.410999] usb usb11: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ohci_hcd
[    8.411001] usb usb11: SerialNumber: 0000:00:14.5
[    8.411362] hub 11-0:1.0: USB hub found
[    8.411381] hub 11-0:1.0: 2 ports detected
[    8.411916] ohci-pci 0000:00:16.0: OHCI PCI host controller
[    8.411926] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 12
[    8.411966] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
[    8.470953] usb usb12: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[    8.470965] usb usb12: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.470971] usb usb12: Product: OHCI PCI host controller
[    8.470977] usb usb12: Manufacturer: Linux 6.3.0-rc3-bdver2-dirty ohci_hcd
[    8.470981] usb usb12: SerialNumber: 0000:00:16.0
[    8.471553] hub 12-0:1.0: USB hub found
[    8.471592] hub 12-0:1.0: 4 ports detected
[    8.543019] [drm] ring test on 5 succeeded in 1 usecs
[    8.543039] [drm] UVD initialized successfully.
[    8.543531] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops radeon_audio_component_bind_ops [radeon])
[    8.543807] [drm] ib test on ring 0 succeeded in 0 usecs
[    8.543937] [drm] ib test on ring 3 succeeded in 0 usecs
[    8.866690] usb 6-1: new low-speed USB device number 2 using ohci-pci
[    9.062999] usb 6-1: New USB device found, idVendor=046d, idProduct=c045, bcdDevice=27.30
[    9.063005] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.063011] usb 6-1: Product: USB-PS/2 Optical Mouse
[    9.063015] usb 6-1: Manufacturer: Logitech
[    9.077723] alx 0000:06:00.0 enp6s0: fatal interrupt 0x200, resetting
[    9.083211] alx 0000:06:00.0 enp6s0: NIC Up: 100 Mbps Full
[    9.103720] hid: raw HID events driver (C) Jiri Kosina
[    9.111441] usbcore: registered new interface driver usbhid
[    9.111446] usbhid: USB HID core driver
[    9.121162] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-1/6-1:1.0/0003:046D:C045.0001/input/input10
[    9.121374] hid-generic 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1/input0
[    9.210155] [drm] ib test on ring 5 succeeded
[    9.210172] stackdepot: allocating hash table of 1048576 entries via kvcalloc
[    9.216533] [drm] Radeon Display Connectors
[    9.216540] [drm] Connector 0:
[    9.216545] [drm]   DP-1
[    9.216549] [drm]   HPD5
[    9.216553] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    9.216562] [drm]   Encoders:
[    9.216565] [drm]     DFP1: INTERNAL_UNIPHY1
[    9.216569] [drm] Connector 1:
[    9.216572] [drm]   HDMI-A-1
[    9.216576] [drm]   HPD1
[    9.216579] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[    9.216587] [drm]   Encoders:
[    9.216590] [drm]     DFP2: INTERNAL_UNIPHY2
[    9.216594] [drm] Connector 2:
[    9.216597] [drm]   DVI-I-1
[    9.216600] [drm]   HPD4
[    9.216603] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[    9.216611] [drm]   Encoders:
[    9.216614] [drm]     DFP3: INTERNAL_UNIPHY
[    9.216617] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    9.342523] [drm] fb mappable at 0xD0363000
[    9.342528] [drm] vram apper at 0xD0000000
[    9.342530] [drm] size 8294400
[    9.342532] [drm] fb depth is 24
[    9.342534] [drm]    pitch is 7680
[    9.342761] fbcon: radeondrmfb (fb0) is primary device
[    9.483359] Console: switching to colour frame buffer device 240x67
[    9.489400] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device
[    9.489590] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[   18.306812] xhci_hcd 0000:07:00.0: can't setup: -110
[   18.306830] xhci_hcd 0000:07:00.0: USB bus 10 deregistered
[   18.307005] xhci_hcd 0000:07:00.0: init 0000:07:00.0 fail, -110
[   18.307010] xhci_hcd: probe of 0000:07:00.0 failed with error -110
[   18.361810] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   18.593445] usb 6-2: new low-speed USB device number 3 using ohci-pci
[   18.807032] usb 6-2: New USB device found, idVendor=1017, idProduct=1010, bcdDevice= 1.02
[   18.807044] usb 6-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   18.807050] usb 6-2: Product: Gaming Keyboard
[   18.826095] input: Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.0/0003:1017:1010.0002/input/input11
[   18.880526] hid-generic 0003:1017:1010.0002: input,hidraw1: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:12.0-2/input0
[   18.965164] input: Gaming Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input12
[   18.965585] input: Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input13
[   19.020426] input: Gaming Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input14
[   19.020733] input: Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb6/6-2/6-2:1.1/0003:1017:1010.0003/input/input15
[   19.022068] hid-generic 0003:1017:1010.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [Gaming Keyboard] on usb-0000:00:12.0-2/input1
[   19.846739] random: crng init done
[   19.864178] device-mapper: uevent: version 1.0.3
[   19.864452] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[   29.144482] BTRFS: device label gehaim devid 1 transid 53810 /dev/dm-0 scanned by (udev-worker) (1213)
[   29.399621] BTRFS info (device nvme0n1p4: state M): use zstd compression, level 2
[   29.699898] Adding 8388604k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:8388604k SSFS
[   29.782336] BTRFS info (device dm-0): using xxhash64 (xxhash64-generic) checksum algorithm
[   29.782353] BTRFS info (device dm-0): use zstd compression, level 1
[   29.782359] BTRFS info (device dm-0): using free space tree
[   29.823600] BTRFS info (device dm-0): enabling ssd optimizations
[   29.826478] BTRFS info (device nvme0n1p6): using xxhash64 (xxhash64-generic) checksum algorithm
[   29.826503] BTRFS info (device nvme0n1p6): setting nodatasum
[   29.826508] BTRFS info (device nvme0n1p6): using free space tree
[   29.830089] BTRFS info (device nvme0n1p6): enabling ssd optimizations
[   29.830098] BTRFS info (device nvme0n1p6): auto enabling async discard
[   31.125509] alg: No test for hmac(md4) (hmac(md4-generic))
[   31.219719] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   31.235652] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   32.484444] Bluetooth: Core ver 2.22
[   32.484484] NET: Registered PF_BLUETOOTH protocol family
[   32.484486] Bluetooth: HCI device and connection manager initialized
[   32.484491] Bluetooth: HCI socket layer initialized
[   32.484494] Bluetooth: L2CAP socket layer initialized
[   32.484498] Bluetooth: SCO socket layer initialized
[   32.491299] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   32.491303] Bluetooth: BNEP filters: protocol multicast
[   32.491308] Bluetooth: BNEP socket layer initialized
[   35.055941] zram: Added device: zram0
[   35.056346] zram: Added device: zram1
[   35.056751] zram: Added device: zram2
[   35.116831] zram2: detected capacity change from 0 to 50331648
[   35.538839] BTRFS: device label var_tmp_dir devid 1 transid 6 /dev/zram2 scanned by mkfs.btrfs (2413)
[   35.542437] BTRFS info (device zram2): using crc32c (crc32c-intel) checksum algorithm
[   35.542446] BTRFS info (device zram2): setting nodatasum
[   35.542449] BTRFS info (device zram2): using free space tree
[   35.544429] BTRFS info (device zram2): enabling ssd optimizations
[   35.544439] BTRFS info (device zram2): auto enabling async discard
[   35.544581] BTRFS info (device zram2): checking UUID tree
[   38.569662] fuse: init (API version 7.38)
[   38.843722] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=2526 'mate-session-ch'
[   39.076695] ------------[ cut here ]------------
[   39.076713] NETDEV WATCHDOG: enp6s0 (alx): transmit queue 1 timed out
[   39.076781] WARNING: CPU: 4 PID: 0 at net/sched/sch_generic.c:526 dev_watchdog+0x1a8/0x1b0

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: When VIA VL805/806 xHCI USB 3.0 Controller is present Atheros E2400 (alx) ethernet does not work: NETDEV WATCHDOG: enp5s0 (alx): transmit queue 2 timed out
  2023-03-26 15:58   ` Erhard Furtner
@ 2023-03-29  9:51     ` Mathias Nyman
  2023-04-01 12:21       ` Erhard F.
  0 siblings, 1 reply; 6+ messages in thread
From: Mathias Nyman @ 2023-03-29  9:51 UTC (permalink / raw)
  To: Erhard Furtner; +Cc: linux-usb, Chris Snook, stable

On 26.3.2023 18.58, Erhard Furtner wrote:
> On Mon, 20 Mar 2023 11:26:39 +0200
> Mathias Nyman <mathias.nyman@linux.intel.com> wrote:
> 
>> This could be related to another case with two xHC controllers, but different vendors.
>> Bus numbers were interleaved there as well. Removing the asynch probe helped:
>>
>> https://lore.kernel.org/linux-usb/d5ff9480-57bd-2c39-8b10-988ad0d14a7e@linux.intel.com/
>>
>> Does reverting:
>> 4c2604a9a689 usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS
>> help for you?
> 
> Ok, reverted 4c2604a9a689 usb: xhci-pci: Set PROBE_PREFER_ASYNCHRONOUS now but unfortunately didn't work out. New dmesg with the reverted commit attached.
> 
> Regards,
> Erhard

Closer look at dmesg shows we are stuck while trying to rest the VIA xHC during probe.
Driver times out after 10 seconds.

[    8.306783] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    8.306791] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 10
[    8.311622] xhci_hcd 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000e address=0xce210880 flags=0x0000]
...
[   18.306812] xhci_hcd 0000:07:00.0: can't setup: -110
[   18.306830] xhci_hcd 0000:07:00.0: USB bus 10 deregistered
[   18.307005] xhci_hcd 0000:07:00.0: init 0000:07:00.0 fail, -110

There is also a IOMMU entry in the log at the same time driver starts resetting the xHC.
There have been some other hosts that triggered IOMMU issues when host tried to access a partial
64 bit DMA address immediately after driver wrote first 32 bits.

Did this VIA xHC work with any older kernel, if yes, any chance you could bisect this?

Also possible that this host would work with a 32 bit DMA mask, hack:

diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 6183ce8574b1..e5b7700a807f 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -5408,7 +5408,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
  
         /* Set dma_mask and coherent_dma_mask to 64-bits,
          * if xHC supports 64-bit addressing */
-       if (HCC_64BIT_ADDR(xhci->hcc_params) &&
+       if (0 && HCC_64BIT_ADDR(xhci->hcc_params) &&
                         !dma_set_mask(dev, DMA_BIT_MASK(64))) {
                 xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
                 dma_set_coherent_mask(dev, DMA_BIT_MASK(64));

Thanks
Mathias


^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: When VIA VL805/806 xHCI USB 3.0 Controller is present Atheros E2400 (alx) ethernet does not work: NETDEV WATCHDOG: enp5s0 (alx): transmit queue 2 timed out
  2023-03-29  9:51     ` Mathias Nyman
@ 2023-04-01 12:21       ` Erhard F.
  0 siblings, 0 replies; 6+ messages in thread
From: Erhard F. @ 2023-04-01 12:21 UTC (permalink / raw)
  To: linux-usb; +Cc: Chris Snook, stable

[-- Attachment #1: Type: text/plain, Size: 1907 bytes --]

On Wed, 29 Mar 2023 12:51:37 +0300
Mathias Nyman <mathias.nyman@linux.intel.com> wrote:

> There is also a IOMMU entry in the log at the same time driver starts resetting the xHC.
> There have been some other hosts that triggered IOMMU issues when host tried to access a partial
> 64 bit DMA address immediately after driver wrote first 32 bits.
> 
> Did this VIA xHC work with any older kernel, if yes, any chance you could bisect this?  

Not as long I got this machine about 3 yrs ago. But I did notice the issue at that time and my 'solution' was to put a different Renesas chipset based PCIe card in for USB 3 and disable the onboard VIA one. Now as I needed this PCIe USB-card on another machine I stumbled over this issue again...

But I can try to check out if it works on an older LTS kernel anyway and start a bisect from there on. This will take some time of course... Would there be a particularly good starting point for an older kernel? Please let me know if yes.

> Also possible that this host would work with a 32 bit DMA mask, hack:
> 
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 6183ce8574b1..e5b7700a807f 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -5408,7 +5408,7 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks)
>   
>          /* Set dma_mask and coherent_dma_mask to 64-bits,
>           * if xHC supports 64-bit addressing */
> -       if (HCC_64BIT_ADDR(xhci->hcc_params) &&
> +       if (0 && HCC_64BIT_ADDR(xhci->hcc_params) &&
>                          !dma_set_mask(dev, DMA_BIT_MASK(64))) {
>                  xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
>                  dma_set_coherent_mask(dev, DMA_BIT_MASK(64));  

Thanks for taking a look Mathias!

Unfortunately this 32 bit DMA mask hack does not work out either, the issue still persists. dmesg attached.

Regards,
Erhard

[-- Attachment #2: dmesg_63-rc4.txt --]
[-- Type: text/plain, Size: 67604 bytes --]

[    0.000000] Linux version 6.3.0-rc4-bdver2-dirty (root@outsider) (clang version 15.0.7, LLD 15.0.7) #3 SMP Sat Apr  1 13:41:10 CEST 2023
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc4-bdver2-dirty root=/dev/nvme0n1p4 ro psmouse.synaptics_intertouch=1 zswap.max_pool_percent=16 zswap.zpool=z3fold slub_debug=FZP page_poison=1 netconsole=6666@10.0.0.14/eth0,6666@10.0.0.3/70:85:C2:30:EC:01
[    0.000000] KERNEL supported cpus:
[    0.000000]   AMD AuthenticAMD
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] signal: max sigframe size: 1776
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ce1fefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ce1ff000-0x00000000ce240fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ce241000-0x00000000ce250fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ce251000-0x00000000ce640fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ce641000-0x00000000cf0f1fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cf0f2000-0x00000000cf155fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000cf156000-0x00000000cf156fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cf157000-0x00000000cf35cfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000cf35d000-0x00000000cf7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000082effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.3.1 by American Megatrends
[    0.000000] efi: ACPI=0xce249000 ACPI 2.0=0xce249000 SMBIOS=0xf04c0 
[    0.000000] efi: Remove mem44: MMIO range=[0xf8000000-0xfbffffff] (64MB) from e820 map
[    0.000000] e820: remove [mem 0xf8000000-0xfbffffff] reserved
[    0.000000] efi: Not removing mem45: MMIO range=[0xfec00000-0xfec00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem46: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem47: MMIO range=[0xfec20000-0xfec20fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem48: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
[    0.000000] efi: Not removing mem49: MMIO range=[0xfed61000-0xfed70fff] (64KB) from e820 map
[    0.000000] efi: Not removing mem50: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
[    0.000000] efi: Remove mem51: MMIO range=[0xfef00000-0xffffffff] (17MB) from e820 map
[    0.000000] e820: remove [mem 0xfef00000-0xffffffff] reserved
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970-GAMING, BIOS F2 04/06/2016
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 4018.382 MHz processor
[    0.000997] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.001021] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.001043] last_pfn = 0x82f000 max_arch_pfn = 0x400000000
[    0.001062] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.001722] e820: update [mem 0xcf800000-0xffffffff] usable ==> reserved
[    0.001729] last_pfn = 0xcf800 max_arch_pfn = 0x400000000
[    0.001748] Using GB pages for direct mapping
[    0.002484] Secure boot disabled
[    0.002487] ACPI: Early table checksum verification disabled
[    0.002490] ACPI: RSDP 0x00000000CE249000 000024 (v02 ALASKA)
[    0.002494] ACPI: XSDT 0x00000000CE249070 00005C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.002499] ACPI: FACP 0x00000000CE24E998 0000F4 (v04 ALASKA A M I    01072009 AMI  00010013)
[    0.002504] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20221020/tbfadt-615)
[    0.002508] ACPI: DSDT 0x00000000CE249158 005839 (v02 ALASKA A M I    00000088 INTL 20051117)
[    0.002512] ACPI: FACS 0x00000000CE63BF80 000040
[    0.002514] ACPI: APIC 0x00000000CE24EA90 00009E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.002517] ACPI: FPDT 0x00000000CE24EB30 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.002520] ACPI: MCFG 0x00000000CE24EB78 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.002523] ACPI: HPET 0x00000000CE24EBB8 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.002525] ACPI: SSDT 0x00000000CE24EBF0 001714 (v01 AMD    POWERNOW 00000001 AMD  00000001)
[    0.002528] ACPI: IVRS 0x00000000CE250308 0000D8 (v01 AMD    RD890S   00202031 AMD  00000000)
[    0.002531] ACPI: Reserving FACP table memory at [mem 0xce24e998-0xce24ea8b]
[    0.002532] ACPI: Reserving DSDT table memory at [mem 0xce249158-0xce24e990]
[    0.002534] ACPI: Reserving FACS table memory at [mem 0xce63bf80-0xce63bfbf]
[    0.002535] ACPI: Reserving APIC table memory at [mem 0xce24ea90-0xce24eb2d]
[    0.002536] ACPI: Reserving FPDT table memory at [mem 0xce24eb30-0xce24eb73]
[    0.002537] ACPI: Reserving MCFG table memory at [mem 0xce24eb78-0xce24ebb3]
[    0.002538] ACPI: Reserving HPET table memory at [mem 0xce24ebb8-0xce24ebef]
[    0.002539] ACPI: Reserving SSDT table memory at [mem 0xce24ebf0-0xce250303]
[    0.002540] ACPI: Reserving IVRS table memory at [mem 0xce250308-0xce2503df]
[    0.002583] Zone ranges:
[    0.002584]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.002586]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.002587]   Normal   [mem 0x0000000100000000-0x000000082effffff]
[    0.002589] Movable zone start for each node
[    0.002589] Early memory node ranges
[    0.002590]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.002592]   node   0: [mem 0x0000000000100000-0x00000000ce1fefff]
[    0.002593]   node   0: [mem 0x00000000cf156000-0x00000000cf156fff]
[    0.002594]   node   0: [mem 0x00000000cf35d000-0x00000000cf7fffff]
[    0.002595]   node   0: [mem 0x0000000100001000-0x000000082effffff]
[    0.002598] Initmem setup node 0 [mem 0x0000000000001000-0x000000082effffff]
[    0.002605] On node 0, zone DMA: 1 pages in unavailable ranges
[    0.002651] On node 0, zone DMA: 96 pages in unavailable ranges
[    0.003333] On node 0, zone DMA32: 3927 pages in unavailable ranges
[    0.003333] On node 0, zone DMA32: 518 pages in unavailable ranges
[    0.003333] On node 0, zone Normal: 2049 pages in unavailable ranges
[    0.003333] On node 0, zone Normal: 4096 pages in unavailable ranges
[    0.003333] ACPI: PM-Timer IO Port: 0x808
[    0.003333] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.003333] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[    0.003333] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[    0.003333] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.003333] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.003333] ACPI: Using ACPI (MADT) for SMP configuration information
[    0.003333] ACPI: HPET id: 0x43538210 base: 0xfed00000
[    0.003333] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.003333] [mem 0xcf800000-0xfebfffff] available for PCI devices
[    0.003333] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.003333] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
[    0.003333] percpu: Embedded 41 pages/cpu s128760 r8192 d30984 u262144
[    0.003333] pcpu-alloc: s128760 r8192 d30984 u262144 alloc=1*2097152
[    0.003333] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.003333] Built 1 zonelists, mobility grouping on.  Total pages: 8246855
[    0.003333] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc4-bdver2-dirty root=/dev/nvme0n1p4 ro psmouse.synaptics_intertouch=1 zswap.max_pool_percent=16 zswap.zpool=z3fold slub_debug=FZP page_poison=1 netconsole=6666@10.0.0.14/eth0,6666@10.0.0.3/70:85:C2:30:EC:01
[    0.003333] Unknown kernel command line parameters "BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc4-bdver2-dirty", will be passed to user space.
[    0.003333] printk: log_buf_len individual max cpu contribution: 8192 bytes
[    0.003333] printk: log_buf_len total cpu_extra contributions: 57344 bytes
[    0.003333] printk: log_buf_len min size: 65536 bytes
[    0.003333] printk: log_buf_len: 131072 bytes
[    0.003333] printk: early log buf free: 57008(86%)
[    0.003333] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
[    0.003333] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[    0.003333] mem auto-init: stack:all(pattern), heap alloc:off, heap free:off
[    0.003333] software IO TLB: area num 8.
[    0.003333] Memory: 3375148K/33511684K available (10240K kernel code, 631K rwdata, 2388K rodata, 1060K init, 1540K bss, 846536K reserved, 0K cma-reserved)
[    0.003333] **********************************************************
[    0.003333] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.003333] **                                                      **
[    0.003333] ** This system shows unhashed kernel memory addresses   **
[    0.003333] ** via the console, logs, and other interfaces. This    **
[    0.003333] ** might reduce the security of your system.            **
[    0.003333] **                                                      **
[    0.003333] ** If you see this message and you are not debugging    **
[    0.003333] ** the kernel, report this immediately to your system   **
[    0.003333] ** administrator!                                       **
[    0.003333] **                                                      **
[    0.003333] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.003333] **********************************************************
[    0.003333] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.003333] rcu: Hierarchical RCU implementation.
[    0.003333] 	Tracing variant of Tasks RCU enabled.
[    0.003333] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.003333] NR_IRQS: 4352, nr_irqs: 1032, preallocated irqs: 16
[    0.003333] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.003333] kfence: initialized - using 2097152 bytes for 255 objects at 0xffff924e8ba00000-0xffff924e8bc00000
[    0.003333] Console: colour dummy device 80x25
[    0.003333] printk: console [tty0] enabled
[    0.003333] ACPI: Core revision 20221020
[    0.003333] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.003333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x39ec31fcc61, max_idle_ns: 440795388079 ns
[    0.643336] Calibrating delay loop (skipped), value calculated using timer frequency.. 8039.62 BogoMIPS (lpj=13394606)
[    0.643341] pid_max: default: 32768 minimum: 301
[    0.680938] LSM: initializing lsm=capability,yama
[    0.680950] Yama: becoming mindful.
[    0.681155] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.681295] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.681741] LVT offset 1 assigned for vector 0xf9
[    0.681749] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.681752] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.681758] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[    0.681764] Spectre V2 : Mitigation: Retpolines
[    0.681766] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.681769] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
[    0.681771] Spectre V2 : Enabling Speculation Barrier for firmware calls
[    0.681773] RETBleed: Mitigation: untrained return thunk
[    0.681777] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.681782] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
[    0.685462] Freeing SMP alternatives memory: 32K
[    0.792415] smpboot: CPU0: AMD FX-8370 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[    0.792658] cblist_init_generic: Setting adjustable number of callback queues.
[    0.792663] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.792692] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.792713] ... version:                0
[    0.792715] ... bit width:              48
[    0.792717] ... generic registers:      6
[    0.792719] ... value mask:             0000ffffffffffff
[    0.792722] ... max period:             00007fffffffffff
[    0.792724] ... fixed-purpose events:   0
[    0.792726] ... event mask:             000000000000003f
[    0.792820] rcu: Hierarchical SRCU implementation.
[    0.792823] rcu: 	Max phase no-delay instances is 1000.
[    0.792895] MCE: In-kernel MCE decoding enabled.
[    0.792970] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.793120] smp: Bringing up secondary CPUs ...
[    0.793276] x86: Booting SMP configuration:
[    0.793278] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.855683] smp: Brought up 1 node, 8 CPUs
[    0.855683] smpboot: Max logical packages: 1
[    0.855683] smpboot: Total of 8 processors activated (64319.03 BogoMIPS)
[    4.452535] node 0 deferred pages initialised in 3594ms
[    4.469790] allocated 67108864 bytes of page_ext
[    4.470158] devtmpfs: initialized
[    4.470274] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    4.470274] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    4.470394] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    4.470771] thermal_sys: Registered thermal governor 'step_wise'
[    4.470772] thermal_sys: Registered thermal governor 'user_space'
[    4.470792] cpuidle: using governor menu
[    4.470819] PCI: Using configuration type 1 for base access
[    4.470819] PCI: Using configuration type 1 for extended access
[    4.470819] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
[    4.470819] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
[    4.470819] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
[    4.470819] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
[    4.526670] raid6: sse2x4   gen()  9789 MB/s
[    4.583335] raid6: sse2x2   gen()  8385 MB/s
[    4.640005] raid6: sse2x1   gen()  6903 MB/s
[    4.640008] raid6: using algorithm sse2x4 gen() 9789 MB/s
[    4.696671] raid6: .... xor() 4103 MB/s, rmw enabled
[    4.696674] raid6: using ssse3x2 recovery algorithm
[    4.696838] ACPI: Added _OSI(Module Device)
[    4.696841] ACPI: Added _OSI(Processor Device)
[    4.696843] ACPI: Added _OSI(3.0 _SCP Extensions)
[    4.696846] ACPI: Added _OSI(Processor Aggregator Device)
[    4.709361] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    4.712160] ACPI: Interpreter enabled
[    4.712171] ACPI: PM: (supports S0 S5)
[    4.712173] ACPI: Using IOAPIC for interrupt routing
[    4.712512] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    4.712516] PCI: Using E820 reservations for host bridge windows
[    4.713032] ACPI: Enabled 10 GPEs in block 00 to 1F
[    4.728316] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    4.728326] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    4.728339] acpi PNP0A08:00: _OSC: OS requested [PME AER PCIeCapability LTR]
[    4.728343] acpi PNP0A08:00: _OSC: platform willing to grant [PME AER PCIeCapability LTR]
[    4.728347] acpi PNP0A08:00: _OSC: platform retains control of PCIe features (AE_NOT_FOUND)
[    4.728825] PCI host bridge to bus 0000:00
[    4.728829] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    4.728833] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    4.728837] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    4.728841] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    4.728845] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
[    4.728849] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xffffffff window]
[    4.728853] pci_bus 0000:00: root bus resource [bus 00-ff]
[    4.728884] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[    4.729031] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[    4.729180] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[    4.729199] pci 0000:00:02.0: enabling Extended Tags
[    4.729228] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[    4.729376] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[    4.729395] pci 0000:00:04.0: enabling Extended Tags
[    4.729422] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[    4.729549] pci 0000:00:06.0: [1002:5a1a] type 01 class 0x060400
[    4.729567] pci 0000:00:06.0: enabling Extended Tags
[    4.729594] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[    4.729716] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[    4.729734] pci 0000:00:09.0: enabling Extended Tags
[    4.729761] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    4.729901] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[    4.729916] pci 0000:00:11.0: reg 0x10: [io  0xf040-0xf047]
[    4.729925] pci 0000:00:11.0: reg 0x14: [io  0xf030-0xf033]
[    4.729934] pci 0000:00:11.0: reg 0x18: [io  0xf020-0xf027]
[    4.729942] pci 0000:00:11.0: reg 0x1c: [io  0xf010-0xf013]
[    4.729951] pci 0000:00:11.0: reg 0x20: [io  0xf000-0xf00f]
[    4.729960] pci 0000:00:11.0: reg 0x24: [mem 0xfeb0b000-0xfeb0b3ff]
[    4.730102] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[    4.730117] pci 0000:00:12.0: reg 0x10: [mem 0xfeb0a000-0xfeb0afff]
[    4.730278] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[    4.730293] pci 0000:00:12.2: reg 0x10: [mem 0xfeb09000-0xfeb090ff]
[    4.730357] pci 0000:00:12.2: supports D1 D2
[    4.730360] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[    4.730490] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[    4.730505] pci 0000:00:13.0: reg 0x10: [mem 0xfeb08000-0xfeb08fff]
[    4.730663] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[    4.730678] pci 0000:00:13.2: reg 0x10: [mem 0xfeb07000-0xfeb070ff]
[    4.730741] pci 0000:00:13.2: supports D1 D2
[    4.730744] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[    4.730857] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[    4.731022] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300
[    4.731039] pci 0000:00:14.2: reg 0x10: [mem 0xfeb00000-0xfeb03fff 64bit]
[    4.731094] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    4.731199] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[    4.731393] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[    4.731527] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[    4.731542] pci 0000:00:14.5: reg 0x10: [mem 0xfeb06000-0xfeb06fff]
[    4.731706] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[    4.731738] pci 0000:00:15.0: enabling Extended Tags
[    4.731777] pci 0000:00:15.0: supports D1 D2
[    4.731899] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[    4.731930] pci 0000:00:15.1: enabling Extended Tags
[    4.731970] pci 0000:00:15.1: supports D1 D2
[    4.732106] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[    4.732121] pci 0000:00:16.0: reg 0x10: [mem 0xfeb05000-0xfeb05fff]
[    4.732269] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[    4.732283] pci 0000:00:16.2: reg 0x10: [mem 0xfeb04000-0xfeb040ff]
[    4.732346] pci 0000:00:16.2: supports D1 D2
[    4.732350] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[    4.732470] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[    4.732539] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[    4.732619] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[    4.732685] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[    4.732764] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[    4.732832] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[    4.732962] pci 0000:01:00.0: [1002:6758] type 00 class 0x030000
[    4.732979] pci 0000:01:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.732992] pci 0000:01:00.0: reg 0x18: [mem 0xfea20000-0xfea3ffff 64bit]
[    4.733001] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    4.733015] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea1ffff pref]
[    4.733023] pci 0000:01:00.0: enabling Extended Tags
[    4.733044] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    4.733080] pci 0000:01:00.0: supports D1 D2
[    4.733177] pci 0000:01:00.1: [1002:aa90] type 00 class 0x040300
[    4.733195] pci 0000:01:00.1: reg 0x10: [mem 0xfea40000-0xfea43fff 64bit]
[    4.733230] pci 0000:01:00.1: enabling Extended Tags
[    4.733279] pci 0000:01:00.1: supports D1 D2
[    4.733396] pci 0000:00:02.0: PCI bridge to [bus 01]
[    4.733402] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    4.733406] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    4.733410] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.733466] pci 0000:02:00.0: [1b21:2142] type 00 class 0x0c0330
[    4.733484] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe907fff 64bit]
[    4.733522] pci 0000:02:00.0: enabling Extended Tags
[    4.733581] pci 0000:02:00.0: PME# supported from D0
[    4.733612] pci 0000:02:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:04.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[    4.733696] pci 0000:00:04.0: PCI bridge to [bus 02]
[    4.733702] pci 0000:00:04.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    4.733764] pci 0000:03:00.0: [15b7:5009] type 00 class 0x010802
[    4.733783] pci 0000:03:00.0: reg 0x10: [mem 0xfe800000-0xfe803fff 64bit]
[    4.733807] pci 0000:03:00.0: reg 0x20: [mem 0xfe804000-0xfe8040ff 64bit]
[    4.733926] pci 0000:03:00.0: 8.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x2 link at 0000:00:06.0 (capable of 31.504 Gb/s with 8.0 GT/s PCIe x4 link)
[    4.734030] pci 0000:00:06.0: PCI bridge to [bus 03]
[    4.734035] pci 0000:00:06.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    4.734121] pci 0000:04:00.0: [1b21:1343] type 00 class 0x0c0330
[    4.734140] pci 0000:04:00.0: reg 0x10: [mem 0xfe700000-0xfe707fff 64bit]
[    4.734178] pci 0000:04:00.0: enabling Extended Tags
[    4.734243] pci 0000:04:00.0: PME# supported from D3hot D3cold
[    4.734422] pci 0000:00:09.0: PCI bridge to [bus 04]
[    4.734428] pci 0000:00:09.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    4.734441] pci_bus 0000:05: extended config space not accessible
[    4.734500] pci 0000:00:14.4: PCI bridge to [bus 05] (subtractive decode)
[    4.734509] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    4.734514] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    4.734518] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    4.734522] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    4.734527] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
[    4.734531] pci 0000:00:14.4:   bridge window [mem 0xd0000000-0xffffffff window] (subtractive decode)
[    4.734600] pci 0000:06:00.0: [1969:e0a1] type 00 class 0x020000
[    4.734627] pci 0000:06:00.0: reg 0x10: [mem 0xfe600000-0xfe63ffff 64bit]
[    4.734639] pci 0000:06:00.0: reg 0x18: [io  0xd000-0xd07f]
[    4.734698] pci 0000:06:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
[    4.734757] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.734883] pci 0000:00:15.0: PCI bridge to [bus 06]
[    4.734889] pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
[    4.734893] pci 0000:00:15.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    4.734957] pci 0000:07:00.0: [1106:3483] type 00 class 0x0c0330
[    4.734978] pci 0000:07:00.0: reg 0x10: [mem 0xfe500000-0xfe500fff 64bit]
[    4.735069] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.735157] pci 0000:00:15.1: PCI bridge to [bus 07]
[    4.735164] pci 0000:00:15.1:   bridge window [mem 0xfe500000-0xfe5fffff]
[    4.735193] pci_bus 0000:00: on NUMA node 0
[    4.736091] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
[    4.736250] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
[    4.736415] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
[    4.736580] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
[    4.736723] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
[    4.736836] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
[    4.736948] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
[    4.737066] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
[    4.737315] iommu: Default domain type: Translated 
[    4.737318] iommu: DMA domain TLB invalidation policy: lazy mode 
[    4.737495] SCSI subsystem initialized
[    4.737525] libata version 3.00 loaded.
[    4.737558] EDAC MC: Ver: 3.0.0
[    4.737674] efivars: Registered efivars operations
[    4.737674] PCI: Using ACPI for IRQ routing
[    4.737674] PCI: pci_cache_line_size set to 64 bytes
[    4.737674] e820: reserve RAM buffer [mem 0xce1ff000-0xcfffffff]
[    4.737674] e820: reserve RAM buffer [mem 0xcf157000-0xcfffffff]
[    4.737674] e820: reserve RAM buffer [mem 0xcf800000-0xcfffffff]
[    4.737674] e820: reserve RAM buffer [mem 0x82f000000-0x82fffffff]
[    4.737674] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    4.737674] pci 0000:01:00.0: vgaarb: bridge control possible
[    4.737674] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    4.737674] vgaarb: loaded
[    4.737674] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    4.737674] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    4.740075] clocksource: Switched to clocksource tsc-early
[    4.740388] pnp: PnP ACPI init
[    4.740543] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    4.741115] system 00:01: [io  0x040b] has been reserved
[    4.741120] system 00:01: [io  0x04d6] has been reserved
[    4.741124] system 00:01: [io  0x0c00-0x0c01] has been reserved
[    4.741128] system 00:01: [io  0x0c14] has been reserved
[    4.741132] system 00:01: [io  0x0c50-0x0c51] has been reserved
[    4.741136] system 00:01: [io  0x0c52] has been reserved
[    4.741140] system 00:01: [io  0x0c6c] has been reserved
[    4.741144] system 00:01: [io  0x0c6f] has been reserved
[    4.741147] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
[    4.741151] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
[    4.741161] system 00:01: [io  0x0cd4-0x0cd5] has been reserved
[    4.741165] system 00:01: [io  0x0cd6-0x0cd7] has been reserved
[    4.741168] system 00:01: [io  0x0cd8-0x0cdf] has been reserved
[    4.741172] system 00:01: [io  0x0800-0x089f] has been reserved
[    4.741176] system 00:01: [io  0x0b20-0x0b3f] has been reserved
[    4.741180] system 00:01: [io  0x0900-0x090f] has been reserved
[    4.741184] system 00:01: [io  0x0910-0x091f] has been reserved
[    4.741187] system 00:01: [io  0xfe00-0xfefe] has been reserved
[    4.741193] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[    4.741198] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[    4.741206] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[    4.741211] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[    4.741216] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[    4.741221] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[    4.741226] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[    4.741573] system 00:02: [io  0x0220-0x0227] has been reserved
[    4.741578] system 00:02: [io  0x0228-0x0237] has been reserved
[    4.741582] system 00:02: [io  0x0a20-0x0a2f] has been reserved
[    4.742127] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    4.742453] system 00:06: [mem 0xfeb20000-0xfeb23fff] has been reserved
[    4.742677] system 00:07: [mem 0xfec20000-0xfec200ff] could not be reserved
[    4.742936] pnp: PnP ACPI: found 8 devices
[    4.750410] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    4.750470] NET: Registered PF_INET protocol family
[    4.751053] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    4.754249] tcp_listen_portaddr_hash hash table entries: 16384 (order: 7, 524288 bytes, linear)
[    4.754354] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    4.754767] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[    4.755762] TCP bind hash table entries: 65536 (order: 10, 4194304 bytes, linear)
[    4.756724] TCP: Hash tables configured (established 262144 bind 65536)
[    4.757240] UDP hash table entries: 16384 (order: 8, 1572864 bytes, linear)
[    4.757776] UDP-Lite hash table entries: 16384 (order: 8, 1572864 bytes, linear)
[    4.757971] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    4.758004] pci 0000:00:02.0: PCI bridge to [bus 01]
[    4.758010] pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
[    4.758015] pci 0000:00:02.0:   bridge window [mem 0xfea00000-0xfeafffff]
[    4.758019] pci 0000:00:02.0:   bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.758025] pci 0000:00:04.0: PCI bridge to [bus 02]
[    4.758029] pci 0000:00:04.0:   bridge window [mem 0xfe900000-0xfe9fffff]
[    4.758034] pci 0000:00:06.0: PCI bridge to [bus 03]
[    4.758038] pci 0000:00:06.0:   bridge window [mem 0xfe800000-0xfe8fffff]
[    4.758044] pci 0000:00:09.0: PCI bridge to [bus 04]
[    4.758047] pci 0000:00:09.0:   bridge window [mem 0xfe700000-0xfe7fffff]
[    4.758053] pci 0000:00:14.4: PCI bridge to [bus 05]
[    4.758063] pci 0000:00:15.0: PCI bridge to [bus 06]
[    4.758066] pci 0000:00:15.0:   bridge window [io  0xd000-0xdfff]
[    4.758071] pci 0000:00:15.0:   bridge window [mem 0xfe600000-0xfe6fffff]
[    4.758078] pci 0000:00:15.1: PCI bridge to [bus 07]
[    4.758083] pci 0000:00:15.1:   bridge window [mem 0xfe500000-0xfe5fffff]
[    4.758091] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    4.758095] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    4.758098] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    4.758101] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    4.758105] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
[    4.758108] pci_bus 0000:00: resource 9 [mem 0xd0000000-0xffffffff window]
[    4.758111] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    4.758114] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    4.758117] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[    4.758121] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    4.758124] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[    4.758128] pci_bus 0000:04: resource 1 [mem 0xfe700000-0xfe7fffff]
[    4.758131] pci_bus 0000:05: resource 4 [io  0x0000-0x03af window]
[    4.758134] pci_bus 0000:05: resource 5 [io  0x03e0-0x0cf7 window]
[    4.758137] pci_bus 0000:05: resource 6 [io  0x03b0-0x03df window]
[    4.758140] pci_bus 0000:05: resource 7 [io  0x0d00-0xffff window]
[    4.758143] pci_bus 0000:05: resource 8 [mem 0x000a0000-0x000dffff window]
[    4.758146] pci_bus 0000:05: resource 9 [mem 0xd0000000-0xffffffff window]
[    4.758150] pci_bus 0000:06: resource 0 [io  0xd000-0xdfff]
[    4.758153] pci_bus 0000:06: resource 1 [mem 0xfe600000-0xfe6fffff]
[    4.758156] pci_bus 0000:07: resource 1 [mem 0xfe500000-0xfe5fffff]
[    4.760198] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[    4.760208] pci 0000:02:00.0: PME# does not work under D0, disabling it
[    4.760994] PCI: CLS 64 bytes, default 64
[    4.761074] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
[    4.762403] pci 0000:00:00.0: Adding to iommu group 0
[    4.762429] pci 0000:00:02.0: Adding to iommu group 1
[    4.762449] pci 0000:00:04.0: Adding to iommu group 2
[    4.762469] pci 0000:00:06.0: Adding to iommu group 3
[    4.762493] pci 0000:00:09.0: Adding to iommu group 4
[    4.762513] pci 0000:00:11.0: Adding to iommu group 5
[    4.762546] pci 0000:00:12.0: Adding to iommu group 6
[    4.762567] pci 0000:00:12.2: Adding to iommu group 6
[    4.762608] pci 0000:00:13.0: Adding to iommu group 7
[    4.762626] pci 0000:00:13.2: Adding to iommu group 7
[    4.762651] pci 0000:00:14.0: Adding to iommu group 8
[    4.762676] pci 0000:00:14.2: Adding to iommu group 9
[    4.762711] pci 0000:00:14.3: Adding to iommu group 10
[    4.762731] pci 0000:00:14.4: Adding to iommu group 11
[    4.762755] pci 0000:00:14.5: Adding to iommu group 12
[    4.762788] pci 0000:00:15.0: Adding to iommu group 13
[    4.762807] pci 0000:00:15.1: Adding to iommu group 13
[    4.762840] pci 0000:00:16.0: Adding to iommu group 14
[    4.762864] pci 0000:00:16.2: Adding to iommu group 14
[    4.762908] pci 0000:01:00.0: Adding to iommu group 15
[    4.762930] pci 0000:01:00.1: Adding to iommu group 15
[    4.762950] pci 0000:02:00.0: Adding to iommu group 16
[    4.762975] pci 0000:03:00.0: Adding to iommu group 17
[    4.762996] pci 0000:04:00.0: Adding to iommu group 18
[    4.763005] pci 0000:06:00.0: Adding to iommu group 13
[    4.763014] pci 0000:07:00.0: Adding to iommu group 13
[    4.770547] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    4.770673] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    4.770676] software IO TLB: mapped [mem 0x00000000bf076000-0x00000000c3076000] (64MB)
[    4.770723] LVT offset 0 assigned for vector 0x400
[    4.770803] perf: AMD IBS detected (0x000000ff)
[    4.771360] Initialise system trusted keyrings
[    4.771430] workingset: timestamp_bits=46 max_order=23 bucket_order=0
[    4.771898] NET: Registered PF_ALG protocol family
[    4.771902] xor: automatically using best checksumming function   avx       
[    4.771906] Key type asymmetric registered
[    4.771909] Asymmetric key parser 'x509' registered
[    4.773312] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    4.773373] io scheduler kyber registered
[    4.775892] IPMI message handler: version 39.2
[    4.777360] ahci 0000:00:11.0: version 3.0
[    4.777447] nvme nvme0: pci function 0000:03:00.0
[    4.777554] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[    4.777562] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
[    4.778010] scsi host0: ahci
[    4.778247] scsi host1: ahci
[    4.778338] ata1: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b100 irq 19
[    4.778343] ata2: SATA max UDMA/133 abar m1024@0xfeb0b000 port 0xfeb0b180 irq 19
[    4.789272] alx 0000:06:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [1c:1b:0d:93:c2:07]
[    4.789343] rtc_cmos 00:03: RTC can wake from S4
[    4.789613] rtc_cmos 00:03: registered as rtc0
[    4.789628] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    4.789731] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x300000 bytes
[    4.789737] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=1024x768x32, linelength=4096
[    4.792051] Console: switching to colour frame buffer device 128x48
[    4.792927] nvme nvme0: allocated 32 MiB host memory buffer.
[    4.794146] nvme nvme0: 8/0/0 default/read/poll queues
[    4.794153] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    4.794409] NET: Registered PF_INET6 protocol family
[    4.795181] Segment Routing with IPv6
[    4.795236] In-situ OAM (IOAM) with IPv6
[    4.795298] NET: Registered PF_PACKET protocol family
[    4.796162] microcode: microcode updated early to new patch_level=0x06000852
[    4.796245] microcode: CPU0: patch_level=0x06000852
[    4.796245] microcode: CPU1: patch_level=0x06000852
[    4.796250] microcode: CPU2: patch_level=0x06000852
[    4.796250] microcode: CPU4: patch_level=0x06000852
[    4.796253] microcode: CPU7: patch_level=0x06000852
[    4.796316] microcode: CPU6: patch_level=0x06000852
[    4.796329] microcode: CPU3: patch_level=0x06000852
[    4.796337] microcode: CPU5: patch_level=0x06000852
[    4.796424] microcode: Microcode Update Driver: v2.2.
[    4.796429] IPI shorthand broadcast: enabled
[    4.799049]  nvme0n1: p1 p2 p3 p4 p5 p6
[    4.799567] sched_clock: Marking stable (4174404012, 623334757)->(4810443929, -12705160)
[    4.799759] registered taskstats version 1
[    4.800004] Loading compiled-in X.509 certificates
[    4.805919] zswap: loaded using pool zstd/z3fold
[    4.811048] debug_vm_pgtable: [debug_vm_pgtable         ]: Validating architecture page table helpers
[    5.089777] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    5.091356] ata1.00: ATA-9: HP SSD S700 Pro 1TB, R0201B, max UDMA/100
[    5.092208] ata1.00: 2000409264 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    5.093374] ata1.00: Features: Dev-Sleep
[    5.094630] ata1.00: configured for UDMA/100
[    5.095609] scsi 0:0:0:0: Direct-Access     ATA      HP SSD S700 Pro  1B   PQ: 0 ANSI: 5
[    5.097079] sd 0:0:0:0: [sda] 2000409264 512-byte logical blocks: (1.02 TB/954 GiB)
[    5.097882] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    5.098718] sd 0:0:0:0: [sda] Write Protect is off
[    5.099536] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.099551] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    5.100378] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[    5.102949]  sda: sda1
[    5.103871] sd 0:0:0:0: [sda] Attached SCSI removable disk
[    5.196952] Btrfs loaded, crc32c=crc32c-intel, zoned=no, fsverity=no
[    5.296690] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    5.300749] ata2.00: ATAPI: PIONEER BD-RW   BDR-208D, 1.50, max UDMA/100
[    5.304982] ata2.00: configured for UDMA/100
[    5.316327] scsi 1:0:0:0: CD-ROM            PIONEER  BD-RW   BDR-208D 1.50 PQ: 0 ANSI: 5
[    5.378595] netpoll: netconsole: local port 6666
[    5.379405] netpoll: netconsole: local IPv4 address 10.0.0.14
[    5.380206] netpoll: netconsole: interface 'eth0'
[    5.380957] netpoll: netconsole: remote port 6666
[    5.381715] netpoll: netconsole: remote IPv4 address 10.0.0.3
[    5.382438] netpoll: netconsole: remote ethernet address 70:85:c2:30:ec:01
[    5.383188] netpoll: netconsole: device eth0 not up yet, forcing it
[    5.796676] tsc: Refined TSC clocksource calibration: 4018.616 MHz
[    5.797433] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39ed0e5685d, max_idle_ns: 440795232051 ns
[    5.798242] clocksource: Switched to clocksource tsc
[    6.277093] alx 0000:06:00.0 eth0: NIC Up: 100 Mbps Full
[    6.278076] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    6.286821] printk: console [netcon0] enabled
[    6.292828] netconsole: network logging started
[    6.294581] BTRFS: device label bdver2_musl devid 1 transid 98267 /dev/root scanned by swapper/0 (1)
[    6.295628] BTRFS info (device nvme0n1p4): using xxhash64 (xxhash64-generic) checksum algorithm
[    6.296464] BTRFS info (device nvme0n1p4): using free space tree
[    6.303509] BTRFS info (device nvme0n1p4): enabling ssd optimizations
[    6.304331] BTRFS info (device nvme0n1p4): auto enabling async discard
[    6.305942] VFS: Mounted root (btrfs filesystem) readonly on device 0:16.
[    6.307266] devtmpfs: mounted
[    6.308469] Freeing unused kernel image (initmem) memory: 1060K
[    6.313359] Write protecting the kernel read-only data: 14336k
[    6.314756] Freeing unused kernel image (rodata/data gap) memory: 1708K
[    6.317897] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    6.318783] rodata_test: all tests were successful
[    6.319674] kallsyms_selftest: start
[    6.319678] Run /sbin/init as init process
[    6.321417]   with arguments:
[    6.321418]     /sbin/init
[    6.321419]   with environment:
[    6.321425]     HOME=/
[    6.321426]     TERM=linux
[    6.321427]     BOOT_IMAGE=/boot/vmlinuz-6.3.0-rc4-bdver2-dirty
[    7.846917] kallsyms_selftest:  ---------------------------------------------------------
[    7.847649] kallsyms_selftest: | nr_symbols | compressed size | original size | ratio(%) |
[    7.848357] kallsyms_selftest: |---------------------------------------------------------|
[    7.849106] kallsyms_selftest: |      34971 |        380964   |       655635  |  58.10   |
[    7.849869] kallsyms_selftest:  ---------------------------------------------------------
[    8.069428] kallsyms_selftest: kallsyms_lookup_name() looked up 34971 symbols
[    8.069434] kallsyms_selftest: The time spent on each symbol is (ns): min=843, max=26571, avg=6108
[    8.071632] ACPI: \_PR_.P001: Found 2 idle states
[    8.071872] ACPI: \_PR_.P002: Found 2 idle states
[    8.072081] ACPI: \_PR_.P003: Found 2 idle states
[    8.072288] ACPI: \_PR_.P004: Found 2 idle states
[    8.072526] ACPI: \_PR_.P005: Found 2 idle states
[    8.072723] ACPI: \_PR_.P006: Found 2 idle states
[    8.072932] ACPI: \_PR_.P007: Found 2 idle states
[    8.073568] kallsyms_selftest: kallsyms_on_each_symbol() traverse all: 4131594 ns
[    8.073582] kallsyms_selftest: kallsyms_on_each_match_symbol() traverse all: 8860 ns
[    8.073584] kallsyms_selftest: finish
[    8.084391] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    8.084400] ACPI: button: Power Button [PWRB]
[    8.085667] ACPI: \_PR_.P008: Found 2 idle states
[    8.086534] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    8.086577] ACPI: button: Power Button [PWRF]
[    8.092805] acpi_cpufreq: overriding BIOS provided _PSD data
[    8.096118] ACPI: bus type USB registered
[    8.098707] usbcore: registered new interface driver usbfs
[    8.101050] usbcore: registered new interface driver hub
[    8.101348] usbcore: registered new device driver usb
[    8.112804] ACPI: bus type drm_connector registered
[    8.122758] QUIRK: Enable AMD PLL fix
[    8.122790] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    8.123373] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
[    8.127254] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    8.127691] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 2
[    8.131044] xhci_hcd 0000:07:00.0: xHCI Host Controller
[    8.131567] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
[    8.136300] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[    8.136315] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[    8.150314] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[    8.161670] alx 0000:06:00.0 enp6s0: renamed from eth0 (while UP)
[    8.177251] BTRFS info: devid 1 device path /dev/root changed to /dev/nvme0n1p4 scanned by (udev-worker) (683)
[    8.178393] xhci_hcd 0000:02:00.0: hcc params 0x0200ef80 hci version 0x110 quirks 0x0000000000800010
[    8.181334] cryptd: max_cpu_qlen set to 1000
[    8.183934] BTRFS: device label ubuntu devid 1 transid 878 /dev/nvme0n1p3 scanned by (udev-worker) (702)
[    8.186391] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    8.186409] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[    8.186422] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    8.186647] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    8.186654] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.186659] usb usb1: Product: xHCI Host Controller
[    8.186664] usb usb1: Manufacturer: Linux 6.3.0-rc4-bdver2-dirty xhci-hcd
[    8.186672] usb usb1: SerialNumber: 0000:02:00.0
[    8.186814] xhci_hcd 0000:04:00.0: hcc params 0x0200eec1 hci version 0x110 quirks 0x0000000000000010
[    8.187378] hub 1-0:1.0: USB hub found
[    8.187409] hub 1-0:1.0: 2 ports detected
[    8.187451] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    8.187965] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    8.188085] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[    8.188091] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.188096] usb usb4: Product: xHCI Host Controller
[    8.188100] usb usb4: Manufacturer: Linux 6.3.0-rc4-bdver2-dirty xhci-hcd
[    8.188104] usb usb4: SerialNumber: 0000:02:00.0
[    8.188778] hub 4-0:1.0: USB hub found
[    8.188825] hub 4-0:1.0: 2 ports detected
[    8.190347] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 5
[    8.190358] xhci_hcd 0000:04:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    8.190465] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[    8.190469] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.190472] usb usb2: Product: xHCI Host Controller
[    8.190474] usb usb2: Manufacturer: Linux 6.3.0-rc4-bdver2-dirty xhci-hcd
[    8.190477] usb usb2: SerialNumber: 0000:04:00.0
[    8.190696] BTRFS: device label bisect_x86-64-v2 devid 1 transid 34534 /dev/nvme0n1p5 scanned by (udev-worker) (700)
[    8.190749] hub 2-0:1.0: USB hub found
[    8.190765] hub 2-0:1.0: 2 ports detected
[    8.190996] usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
[    8.191050] usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.03
[    8.191054] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.191057] usb usb5: Product: xHCI Host Controller
[    8.191059] usb usb5: Manufacturer: Linux 6.3.0-rc4-bdver2-dirty xhci-hcd
[    8.191062] usb usb5: SerialNumber: 0000:04:00.0
[    8.191765] hub 5-0:1.0: USB hub found
[    8.191781] hub 5-0:1.0: 2 ports detected
[    8.197871] BTRFS: device label distfiles devid 1 transid 47 /dev/nvme0n1p6 scanned by (udev-worker) (710)
[    8.304302] alx 0000:06:00.0 enp6s0: fatal interrupt 0x200, resetting
[    8.315525] alx 0000:06:00.0 enp6s0: NIC Up: 100 Mbps Full
[   18.131598] xhci_hcd 0000:07:00.0: can't setup: -110
[   18.131617] xhci_hcd 0000:07:00.0: USB bus 3 deregistered
[   18.131645] xhci_hcd 0000:07:00.0: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x000e address=0xce210880 flags=0x0000]
[   18.131740] ehci-pci 0000:00:12.2: EHCI Host Controller
[   18.131782] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3
[   18.131813] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[   18.131824] xhci_hcd 0000:07:00.0: init 0000:07:00.0 fail, -110
[   18.131832] xhci_hcd: probe of 0000:07:00.0 failed with error -110
[   18.131833] ehci-pci 0000:00:12.2: debug port 1
[   18.132018] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb09000
[   18.143400] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[   18.143747] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[   18.143756] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.143761] usb usb3: Product: EHCI Host Controller
[   18.143767] usb usb3: Manufacturer: Linux 6.3.0-rc4-bdver2-dirty ehci_hcd
[   18.143772] usb usb3: SerialNumber: 0000:00:12.2
[   18.144310] hub 3-0:1.0: USB hub found
[   18.144338] hub 3-0:1.0: 5 ports detected
[   18.145126] ehci-pci 0000:00:13.2: EHCI Host Controller
[   18.145138] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 6
[   18.145148] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[   18.145159] ehci-pci 0000:00:13.2: debug port 1
[   18.145234] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb07000
[   18.160111] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[   18.160359] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[   18.160368] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.160373] usb usb6: Product: EHCI Host Controller
[   18.160377] usb usb6: Manufacturer: Linux 6.3.0-rc4-bdver2-dirty ehci_hcd
[   18.160380] usb usb6: SerialNumber: 0000:00:13.2
[   18.160738] hub 6-0:1.0: USB hub found
[   18.160769] hub 6-0:1.0: 5 ports detected
[   18.161322] ehci-pci 0000:00:16.2: EHCI Host Controller
[   18.161339] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
[   18.161373] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[   18.161387] ehci-pci 0000:00:16.2: debug port 1
[   18.161485] ehci-pci 0000:00:16.2: irq 17, io mem 0xfeb04000
[   18.173420] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[   18.173697] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.03
[   18.173706] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.173712] usb usb7: Product: EHCI Host Controller
[   18.173717] usb usb7: Manufacturer: Linux 6.3.0-rc4-bdver2-dirty ehci_hcd
[   18.173722] usb usb7: SerialNumber: 0000:00:16.2
[   18.174306] hub 7-0:1.0: USB hub found
[   18.174359] hub 7-0:1.0: 4 ports detected
[   18.182117] it87: Found IT8620E chip at 0x228, revision 4
[   18.182147] it87: Beeping is supported
[   18.182439] ohci-pci 0000:00:12.0: OHCI PCI host controller
[   18.182458] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
[   18.182523] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb0a000
[   18.183183] AVX version of gcm_enc/dec engaged.
[   18.183272] AES CTR mode by8 optimization enabled
[   18.211744] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   18.212852] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   18.217007] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input2
[   18.224701] Asymmetric key parser 'pkcs8' registered
[   18.240423] [drm] radeon kernel modesetting enabled.
[   18.240809] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[   18.240817] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.240821] usb usb8: Product: OHCI PCI host controller
[   18.240824] usb usb8: Manufacturer: Linux 6.3.0-rc4-bdver2-dirty ohci_hcd
[   18.240827] usb usb8: SerialNumber: 0000:00:12.0
[   18.241665] Console: switching to colour dummy device 80x25
[   18.242255] sr 1:0:0:0: [sr0] scsi3-mmc drive: 125x/125x writer cd/rw xa/form2 cdda tray
[   18.242262] cdrom: Uniform CD-ROM driver Revision: 3.20
[   18.242518] radeon 0000:01:00.0: vgaarb: deactivate vga console
[   18.244344] hub 8-0:1.0: USB hub found
[   18.244370] hub 8-0:1.0: 5 ports detected
[   18.246298] [drm] initializing kernel modesetting (TURKS 0x1002:0x6758 0x174B:0xE194 0x00).
[   18.246433] ATOM BIOS: TURKS
[   18.246592] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
[   18.246596] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF
[   18.246602] [drm] Detected VRAM RAM=1024M, BAR=256M
[   18.246604] [drm] RAM width 128bits DDR
[   18.246710] [drm] radeon: 1024M of VRAM memory ready
[   18.246713] [drm] radeon: 1024M of GTT memory ready.
[   18.246726] [drm] Loading TURKS Microcode
[   18.247419] ohci-pci 0000:00:13.0: OHCI PCI host controller
[   18.247433] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
[   18.247478] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb08000
[   18.247651] snd_hda_codec_realtek hdaudioC0D0: ALC1150: SKU not ready 0x00000000
[   18.248235] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[   18.248240] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   18.248243] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[   18.248247] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[   18.248249] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x1e
[   18.248251] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[   18.248253] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[   18.248256] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[   18.248259] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[   18.250333] [drm] Internal thermal controller without fan control
[   18.255405] [drm] radeon: dpm initialized
[   18.257207] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   18.258552] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[   18.266155] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3
[   18.266314] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[   18.266456] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input5
[   18.266606] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
[   18.266879] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[   18.267174] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
[   18.271788] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
[   18.272376] [drm] PCIE GART of 1024M enabled (table at 0x0000000000162000).
[   18.272500] radeon 0000:01:00.0: WB enabled
[   18.272504] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00
[   18.272509] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c
[   18.273280] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118
[   18.274612] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[   18.279157] radeon 0000:01:00.0: radeon: using MSI.
[   18.279207] [drm] radeon: irq initialized.
[   18.288132] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   18.295842] [drm] ring test on 0 succeeded in 2 usecs
[   18.295856] [drm] ring test on 3 succeeded in 7 usecs
[   18.307525] usb usb9: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[   18.307532] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.307536] usb usb9: Product: OHCI PCI host controller
[   18.307539] usb usb9: Manufacturer: Linux 6.3.0-rc4-bdver2-dirty ohci_hcd
[   18.307541] usb usb9: SerialNumber: 0000:00:13.0
[   18.307806] hub 9-0:1.0: USB hub found
[   18.307823] hub 9-0:1.0: 5 ports detected
[   18.308492] ohci-pci 0000:00:14.5: OHCI PCI host controller
[   18.308502] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
[   18.308546] ohci-pci 0000:00:14.5: irq 18, io mem 0xfeb06000
[   18.367603] usb usb10: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[   18.367615] usb usb10: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.367622] usb usb10: Product: OHCI PCI host controller
[   18.367627] usb usb10: Manufacturer: Linux 6.3.0-rc4-bdver2-dirty ohci_hcd
[   18.367632] usb usb10: SerialNumber: 0000:00:14.5
[   18.368110] hub 10-0:1.0: USB hub found
[   18.368139] hub 10-0:1.0: 2 ports detected
[   18.369031] ohci-pci 0000:00:16.0: OHCI PCI host controller
[   18.369050] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
[   18.369118] ohci-pci 0000:00:16.0: irq 18, io mem 0xfeb05000
[   18.427603] usb usb11: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.03
[   18.427616] usb usb11: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   18.427622] usb usb11: Product: OHCI PCI host controller
[   18.427628] usb usb11: Manufacturer: Linux 6.3.0-rc4-bdver2-dirty ohci_hcd
[   18.427632] usb usb11: SerialNumber: 0000:00:16.0
[   18.428093] hub 11-0:1.0: USB hub found
[   18.428122] hub 11-0:1.0: 4 ports detected
[   18.473026] [drm] ring test on 5 succeeded in 2 usecs
[   18.473037] [drm] UVD initialized successfully.
[   18.473292] snd_hda_intel 0000:01:00.1: bound 0000:01:00.0 (ops radeon_audio_component_bind_ops [radeon])
[   18.473886] [drm] ib test on ring 0 succeeded in 0 usecs
[   18.473979] [drm] ib test on ring 3 succeeded in 0 usecs
[   18.616744] usb 8-1: new low-speed USB device number 2 using ohci-pci
[   18.806821] usb 8-1: New USB device found, idVendor=046d, idProduct=c045, bcdDevice=27.30
[   18.806834] usb 8-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[   18.806841] usb 8-1: Product: USB-PS/2 Optical Mouse
[   18.806846] usb 8-1: Manufacturer: Logitech
[   18.847815] hid: raw HID events driver (C) Jiri Kosina
[   18.855245] usbcore: registered new interface driver usbhid
[   18.855250] usbhid: USB HID core driver
[   18.866133] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:12.0/usb8/8-1/8-1:1.0/0003:046D:C045.0001/input/input10
[   18.866372] hid-generic 0003:046D:C045.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:12.0-1/input0
[   19.130201] [drm] ib test on ring 5 succeeded
[   19.130217] stackdepot: allocating hash table of 1048576 entries via kvcalloc
[   19.136290] [drm] Radeon Display Connectors
[   19.136295] [drm] Connector 0:
[   19.136298] [drm]   DP-1
[   19.136301] [drm]   HPD5
[   19.136304] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[   19.136310] [drm]   Encoders:
[   19.136312] [drm]     DFP1: INTERNAL_UNIPHY1
[   19.136315] [drm] Connector 1:
[   19.136318] [drm]   HDMI-A-1
[   19.136320] [drm]   HPD1
[   19.136323] [drm]   DDC: 0x6470 0x6470 0x6474 0x6474 0x6478 0x6478 0x647c 0x647c
[   19.136328] [drm]   Encoders:
[   19.136331] [drm]     DFP2: INTERNAL_UNIPHY2
[   19.136333] [drm] Connector 2:
[   19.136336] [drm]   DVI-I-1
[   19.136338] [drm]   HPD4
[   19.136341] [drm]   DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
[   19.136346] [drm]   Encoders:
[   19.136348] [drm]     DFP3: INTERNAL_UNIPHY
[   19.136351] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[   19.259208] [drm] fb mappable at 0xD0363000
[   19.259215] [drm] vram apper at 0xD0000000
[   19.259219] [drm] size 8294400
[   19.259222] [drm] fb depth is 24
[   19.259225] [drm]    pitch is 7680
[   19.259536] fbcon: radeondrmfb (fb0) is primary device
[   19.316752] usb 8-2: new low-speed USB device number 3 using ohci-pci
[   19.399748] Console: switching to colour frame buffer device 240x67
[   19.405185] radeon 0000:01:00.0: [drm] fb0: radeondrmfb frame buffer device
[   19.414633] [drm] Initialized radeon 2.50.0 20080528 for 0000:01:00.0 on minor 0
[   19.536815] usb 8-2: New USB device found, idVendor=1017, idProduct=1010, bcdDevice= 1.02
[   19.536829] usb 8-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[   19.536836] usb 8-2: Product: Gaming Keyboard
[   19.556691] input: Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.0/0003:1017:1010.0002/input/input11
[   19.617012] hid-generic 0003:1017:1010.0002: input,hidraw1: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:12.0-2/input0
[   19.701011] input: Gaming Keyboard Mouse as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.1/0003:1017:1010.0003/input/input12
[   19.701361] input: Gaming Keyboard Consumer Control as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.1/0003:1017:1010.0003/input/input13
[   19.757089] input: Gaming Keyboard System Control as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.1/0003:1017:1010.0003/input/input14
[   19.757408] input: Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-2/8-2:1.1/0003:1017:1010.0003/input/input15
[   19.758106] hid-generic 0003:1017:1010.0003: input,hiddev96,hidraw2: USB HID v1.10 Mouse [Gaming Keyboard] on usb-0000:00:12.0-2/input1
[   20.390075] random: crng init done
[   20.407735] device-mapper: uevent: version 1.0.3
[   20.407970] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[   23.076715] ------------[ cut here ]------------
[   23.076722] NETDEV WATCHDOG: enp6s0 (alx): transmit queue 1 timed out
[   23.076780] WARNING: CPU: 4 PID: 0 at net/sched/sch_generic.c:526 dev_watchdog+0x1a8/0x1b0
[   23.076794] Modules linked in: dm_mod joydev input_leds hid_generic usbhid hid snd_hda_codec_realtek crc32_pclmul snd_hda_codec_generic sha512_ssse3 radeon ledtrig_audio sha512_generic pkcs8_key_parser led_class drm_ttm_helper snd_hda_codec_hdmi ttm sg i2c_algo_bit drm_display_helper drm_kms_helper snd_hda_intel aesni_intel it87 sr_mod k10temp fam15h_power sysimgblt snd_intel_dspcfg ohci_pci hwmon_vid evdev libaes crypto_simd cryptd cdrom hwmon ehci_pci ohci_hcd i2c_piix4 ehci_hcd snd_hda_codec syscopyarea snd_hwdep xhci_pci sysfillrect snd_hda_core xhci_hcd drm snd_pcm acpi_cpufreq snd_timer drm_panel_orientation_quirks usbcore video wmi snd usb_common soundcore backlight button processor efivarfs
[   23.076925] CPU: 4 PID: 0 Comm: swapper/4 Not tainted 6.3.0-rc4-bdver2-dirty #3
[   23.076932] Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./970-GAMING, BIOS F2 04/06/2016
[   23.076936] RIP: 0010:dev_watchdog+0x1a8/0x1b0
[   23.076944] Code: ff ff e9 63 ff ff ff c6 05 85 91 83 00 01 4c 89 f7 e8 8c 10 fc ff 48 c7 c7 9a a0 b6 a2 4c 89 f6 48 89 c2 89 d9 e8 98 4a 9e ff <0f> 0b e9 6e ff ff ff 90 41 57 41 56 53 49 89 fe 8b 87 c8 03 00 00
[   23.076950] RSP: 0018:ffffb43d40188ea8 EFLAGS: 00010246
[   23.076956] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[   23.076961] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[   23.076965] RBP: 000000007fffffff R08: 0000000000000000 R09: 0000000000000000
[   23.076969] R10: 0000000000000000 R11: 0000000000000000 R12: ffff92478673c490
[   23.076973] R13: dead000000000122 R14: ffff92478673c000 R15: ffff92478673c3e0
[   23.076977] FS:  0000000000000000(0000) GS:ffff924e8ed00000(0000) knlGS:0000000000000000
[   23.076983] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   23.076987] CR2: 00007f18db451000 CR3: 000000017d3ba000 CR4: 00000000000406e0
[   23.076992] Call Trace:
[   23.076996]  <IRQ>
[   23.077001]  ? dev_init_scheduler+0x80/0x80
[   23.077008]  ? dev_init_scheduler+0x80/0x80
[   23.077013]  call_timer_fn+0x1d/0xa0
[   23.077023]  __run_timers+0x178/0x1f0
[   23.077032]  run_timer_softirq+0x14/0x30
[   23.077040]  __do_softirq+0xc3/0x1d9
[   23.077048]  __irq_exit_rcu+0x74/0xa0
[   23.077056]  sysvec_apic_timer_interrupt+0x6d/0x80
[   23.077064]  </IRQ>
[   23.077067]  <TASK>
[   23.077070]  asm_sysvec_apic_timer_interrupt+0x16/0x20
[   23.077079] RIP: 0010:cpuidle_enter_state+0x119/0x210
[   23.077087] Code: fe ff ff e8 49 d5 90 ff e8 44 f8 ff ff 48 89 c5 31 ff e8 ea 56 90 ff 45 84 ed 48 8b 5c 24 10 74 05 e8 8b b4 e7 ff fb 45 85 f6 <78> 4e 44 89 f0 48 6b d0 68 48 8b 4c 13 48 48 2b 6c 24 08 49 89 6f
[   23.077092] RSP: 0018:ffffb43d400b7e88 EFLAGS: 00000202
[   23.077098] RAX: 0000000000000000 RBX: ffffffffc026f0f0 RCX: 0000000000000000
[   23.077102] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
[   23.077106] RBP: 000000055f7a838f R08: 0000000000000000 R09: 0000000000000000
[   23.077110] R10: 0000000000000000 R11: ffffffffc0269ea0 R12: 0000000000000002
[   23.077114] R13: 0000000000000000 R14: 0000000000000002 R15: ffff9247fc5b9000
[   23.077119]  ? cleanup_module+0x60/0x60 [processor]
[   23.077134]  ? cpuidle_enter_state+0x106/0x210
[   23.077142]  cpuidle_enter+0x24/0x40
[   23.077150]  do_idle+0x130/0x1c0
[   23.077158]  cpu_startup_entry+0x14/0x20
[   23.077165]  start_secondary+0x8a/0x90
[   23.077174]  secondary_startup_64_no_verify+0xcf/0xdb
[   23.077181]  </TASK>
[   23.077184] ---[ end trace 0000000000000000 ]---
[   23.088094] alx 0000:06:00.0 enp6s0: NIC Up: 100 Mbps Full
[   29.469958] BTRFS: device label gehaim devid 1 transid 53983 /dev/dm-0 scanned by (udev-worker) (1210)
[   29.772463] BTRFS info (device nvme0n1p4: state M): use zstd compression, level 2
[   29.935653] Adding 8388604k swap on /dev/nvme0n1p2.  Priority:-2 extents:1 across:8388604k SSFS
[   30.008913] BTRFS info (device dm-0): using xxhash64 (xxhash64-generic) checksum algorithm
[   30.008929] BTRFS info (device dm-0): use zstd compression, level 1
[   30.008933] BTRFS info (device dm-0): using free space tree
[   30.052195] BTRFS info (device dm-0): enabling ssd optimizations
[   30.055028] BTRFS info (device nvme0n1p6): using xxhash64 (xxhash64-generic) checksum algorithm
[   30.055041] BTRFS info (device nvme0n1p6): setting nodatasum
[   30.055045] BTRFS info (device nvme0n1p6): using free space tree
[   30.058106] BTRFS info (device nvme0n1p6): enabling ssd optimizations
[   30.058111] BTRFS info (device nvme0n1p6): auto enabling async discard
[   31.423504] alg: No test for hmac(md4) (hmac(md4-generic))
[   31.508969] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   31.529593] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   32.749156] Bluetooth: Core ver 2.22
[   32.749204] NET: Registered PF_BLUETOOTH protocol family
[   32.749206] Bluetooth: HCI device and connection manager initialized
[   32.749212] Bluetooth: HCI socket layer initialized
[   32.749215] Bluetooth: L2CAP socket layer initialized
[   32.749220] Bluetooth: SCO socket layer initialized
[   32.756632] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   32.756636] Bluetooth: BNEP filters: protocol multicast
[   32.756640] Bluetooth: BNEP socket layer initialized
[   35.399702] zram: Added device: zram0
[   35.400376] zram: Added device: zram1
[   35.401021] zram: Added device: zram2
[   35.458429] zram2: detected capacity change from 0 to 50331648
[   35.882608] BTRFS: device label var_tmp_dir devid 1 transid 6 /dev/zram2 scanned by mkfs.btrfs (2409)
[   35.885682] BTRFS info (device zram2): using crc32c (crc32c-intel) checksum algorithm
[   35.885692] BTRFS info (device zram2): setting nodatasum
[   35.885694] BTRFS info (device zram2): using free space tree
[   35.887763] BTRFS info (device zram2): enabling ssd optimizations
[   35.887767] BTRFS info (device zram2): auto enabling async discard
[   35.887843] BTRFS info (device zram2): checking UUID tree
[   38.015240] alx 0000:06:00.0 enp6s0: NIC Up: 100 Mbps Full
[   38.494313] fuse: init (API version 7.38)
[   38.766218] memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=2519 'mate-session-ch'
[   48.044445] alx 0000:06:00.0 enp6s0: NIC Up: 100 Mbps Full
[   58.074176] alx 0000:06:00.0 enp6s0: NIC Up: 100 Mbps Full
[   68.100954] alx 0000:06:00.0 enp6s0: NIC Up: 100 Mbps Full
[   78.127283] alx 0000:06:00.0 enp6s0: NIC Up: 100 Mbps Full

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2023-04-01 12:21 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-03-19  0:37 When VIA VL805/806 xHCI USB 3.0 Controller is present Atheros E2400 (alx) ethernet does not work: NETDEV WATCHDOG: enp5s0 (alx): transmit queue 2 timed out Erhard Furtner
2023-03-20  9:26 ` Mathias Nyman
2023-03-21 19:50   ` Erhard Furtner
2023-03-26 15:58   ` Erhard Furtner
2023-03-29  9:51     ` Mathias Nyman
2023-04-01 12:21       ` Erhard F.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).