From: Tejas Joglekar <Tejas.Joglekar@synopsys.com>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Tejas Joglekar <Tejas.Joglekar@synopsys.com>,
linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
Rob Herring <robh+dt@kernel.org>
Cc: John Youn <John.Youn@synopsys.com>
Subject: [PATCH v3 1/4] dt-bindings: usb: Add documentation for SG trb cache size quirk
Date: Wed, 27 May 2020 16:10:55 +0530 [thread overview]
Message-ID: <d91b768b3827fce611ba052aa1bcca19ac09fd75.1590415123.git.joglekar@synopsys.com> (raw)
In-Reply-To: <cover.1590415123.git.joglekar@synopsys.com>
This commit adds the documentation for sgl-trb-cache-size-quirk, and
snps,sgl-trb-cache-size-quirk property. These when set enables the
quirk for XHCI driver for consolidation of sg list into a temporary
buffer when small buffer sizes are scattered over the sg list not
making up to MPS or total transfer size within TRB cache size with
Synopsys xHC.
Signed-off-by: Tejas Joglekar <joglekar@synopsys.com>
---
Documentation/devicetree/bindings/usb/dwc3.txt | 4 ++++
Documentation/devicetree/bindings/usb/usb-xhci.txt | 3 +++
2 files changed, 7 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index d03edf9d3935..0fcbaa51f66e 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -102,6 +102,10 @@ Optional properties:
this and tx-thr-num-pkt-prd to a valid, non-zero value
1-16 (DWC_usb31 programming guide section 1.2.3) to
enable periodic ESS TX threshold.
+ - snps,sgl-trb-cache-size-quirk: enable sg list consolidation - host mode
+ only. Set to use SG buffers of at least MPS size
+ by consolidating smaller SG buffers list into a
+ single buffer.
- <DEPRECATED> tx-fifo-resize: determines if the FIFO *has* to be reallocated.
- snps,incr-burst-type-adjustment: Value for INCR burst type of GSBUSCFG0
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index dc025f126d71..c53eb19ae67e 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -44,6 +44,9 @@ Optional properties:
- quirk-broken-port-ped: set if the controller has broken port disable mechanism
- imod-interval-ns: default interrupt moderation interval is 5000ns
- phys : see usb-hcd.yaml in the current directory
+ - sgl-trb-cache-size-quirk: set if you need to consolidate sg list into a
+ temporary buffer when small SG buffer sizes does not make upto MPS
+ size or total transfer size across the TRB cache size.
additionally the properties from usb-hcd.yaml (in the current directory) are
supported.
--
2.11.0
next prev parent reply other threads:[~2020-05-27 10:43 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-27 10:40 [PATCH v3 0/4] Add logic to consolidate TRBs for Synopsys xHC Tejas Joglekar
2020-05-27 10:40 ` Tejas Joglekar [this message]
2020-05-29 18:05 ` [PATCH v3 1/4] dt-bindings: usb: Add documentation for SG trb cache size quirk Rob Herring
2020-05-27 10:41 ` [PATCH v3 2/4] usb: xhci: Set quirk for XHCI_SG_TRB_CACHE_SIZE_QUIRK Tejas Joglekar
2020-05-27 10:41 ` [PATCH v3 3/4] usb: dwc3: Add device property sgl-trb-cache-size-quirk Tejas Joglekar
2020-07-06 5:07 ` Tejas Joglekar
2020-07-06 6:43 ` Felipe Balbi
2020-07-07 17:21 ` Tejas Joglekar
2020-07-12 13:45 ` Tejas Joglekar
2020-07-15 5:51 ` Tejas Joglekar
2020-07-21 9:47 ` Felipe Balbi
2020-07-21 16:57 ` Tejas Joglekar
2020-07-31 10:13 ` Tejas Joglekar
2020-08-04 0:44 ` Thinh Nguyen
2020-08-04 1:59 ` Jun Li
2020-05-27 10:42 ` [PATCH v3 4/4] usb: xhci: Use temporary buffer to consolidate SG Tejas Joglekar
2020-06-08 4:32 ` [PATCH v3 0/4] Add logic to consolidate TRBs for Synopsys xHC Tejas Joglekar
2020-06-09 8:57 ` Mathias Nyman
2020-06-11 18:07 ` Tejas Joglekar
2020-06-30 6:28 ` Tejas Joglekar
2020-07-23 10:35 ` Jun Li
2020-07-24 0:15 ` Tejas Joglekar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d91b768b3827fce611ba052aa1bcca19ac09fd75.1590415123.git.joglekar@synopsys.com \
--to=tejas.joglekar@synopsys.com \
--cc=John.Youn@synopsys.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).