* [PATCH v4 01/12] usb: ch9: Add sublink speed struct
2020-07-26 1:35 [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
@ 2020-07-26 1:35 ` Thinh Nguyen
2020-07-26 1:36 ` [PATCH v4 02/12] usb: gadget: composite: Avoid using magic numbers Thinh Nguyen
` (11 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Thinh Nguyen @ 2020-07-26 1:35 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, Thinh Nguyen, linux-usb; +Cc: John Youn
USB 3.2 specification supports dual-lane for super-speed-plus. USB
devices may operate at different sublink speeds. To avoid using magic
numbers and capture the sublink speed better, introduce the
usb_sublink_speed structure and various sublink speed attribute enum.
See SSP BOS descriptor in USB 3.2 specification section 9.6.2.5
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v4:
- None
Changes in v3:
- None
Changes in v2:
- Move to include/linux/usb/ch9.h instead of under uapi
include/linux/usb/ch9.h | 43 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 604c6c514a50..01191649a0ad 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -36,6 +36,49 @@
#include <linux/device.h>
#include <uapi/linux/usb/ch9.h>
+/* USB 3.2 sublink speed attributes */
+
+enum usb_lane_speed_exponent {
+ USB_LSE_BPS = 0,
+ USB_LSE_KBPS = 1,
+ USB_LSE_MBPS = 2,
+ USB_LSE_GBPS = 3,
+};
+
+enum usb_sublink_type {
+ USB_ST_SYMMETRIC_RX = 0,
+ USB_ST_ASYMMETRIC_RX = 1,
+ USB_ST_SYMMETRIC_TX = 2,
+ USB_ST_ASYMMETRIC_TX = 3,
+};
+
+enum usb_link_protocol {
+ USB_LP_SS = 0,
+ USB_LP_SSP = 1,
+};
+
+/**
+ * struct usb_sublink_speed - sublink speed attribute
+ * @id: sublink speed attribute ID (SSID)
+ * @mantissa: lane speed mantissa
+ * @exponent: lane speed exponent
+ * @type: sublink type
+ * @protocol: sublink protocol
+ *
+ * Super-speed-plus supports multiple lanes. Use the sublink speed attributes to
+ * describe the sublink speed.
+ *
+ * See USB 3.2 spec section 9.6.2.6 for super-speed-plus capability for more
+ * information.
+ */
+struct usb_sublink_speed {
+ u8 id;
+ u16 mantissa;
+ enum usb_lane_speed_exponent exponent;
+ enum usb_sublink_type type;
+ enum usb_link_protocol protocol;
+};
+
/**
* usb_ep_type_string() - Returns human readable-name of the endpoint type.
* @ep_type: The endpoint type to return human-readable name for. If it's not
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v4 02/12] usb: gadget: composite: Avoid using magic numbers
2020-07-26 1:35 [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
2020-07-26 1:35 ` [PATCH v4 01/12] usb: ch9: Add sublink speed struct Thinh Nguyen
@ 2020-07-26 1:36 ` Thinh Nguyen
2020-07-26 1:36 ` [PATCH v4 03/12] usb: gadget: Expose sublink speed attributes Thinh Nguyen
` (10 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Thinh Nguyen @ 2020-07-26 1:36 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, Thinh Nguyen, linux-usb; +Cc: John Youn
Magic numbers are difficult to read. Use macros for super-speed-plus BOS
descriptor attributes in the composite driver. They're self-documented.
So there's no need to provide comments as we did previously for the
magic numbers.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v4:
- None
Changes in v3:
- None
Changes in v2:
- None
drivers/usb/gadget/composite.c | 41 ++++++++++++++++++++---------------------
1 file changed, 20 insertions(+), 21 deletions(-)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 05b176c82cc5..0aa4cb49aa53 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -13,6 +13,7 @@
#include <linux/module.h>
#include <linux/device.h>
#include <linux/utsname.h>
+#include <linux/bitfield.h>
#include <linux/usb/composite.h>
#include <linux/usb/otg.h>
@@ -743,32 +744,30 @@ static int bos_desc(struct usb_composite_dev *cdev)
ssp_cap->bReserved = 0;
ssp_cap->wReserved = 0;
- /* SSAC = 1 (2 attributes) */
- ssp_cap->bmAttributes = cpu_to_le32(1);
+ ssp_cap->bmAttributes =
+ cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_ATTRIBS, 1) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_IDS, 0));
- /* Min RX/TX Lane Count = 1 */
ssp_cap->wFunctionalitySupport =
- cpu_to_le16((1 << 8) | (1 << 12));
+ cpu_to_le16(FIELD_PREP(USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID, 0) |
+ FIELD_PREP(USB_SSP_MIN_RX_LANE_COUNT, 1) |
+ FIELD_PREP(USB_SSP_MIN_TX_LANE_COUNT, 1));
- /*
- * bmSublinkSpeedAttr[0]:
- * ST = Symmetric, RX
- * LSE = 3 (Gbps)
- * LP = 1 (SuperSpeedPlus)
- * LSM = 10 (10 Gbps)
- */
ssp_cap->bmSublinkSpeedAttr[0] =
- cpu_to_le32((3 << 4) | (1 << 14) | (0xa << 16));
- /*
- * bmSublinkSpeedAttr[1] =
- * ST = Symmetric, TX
- * LSE = 3 (Gbps)
- * LP = 1 (SuperSpeedPlus)
- * LSM = 10 (10 Gbps)
- */
+ cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, 0) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE, USB_LSE_GBPS) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST,
+ USB_ST_SYMMETRIC_RX) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP, USB_LP_SSP) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, 10));
+
ssp_cap->bmSublinkSpeedAttr[1] =
- cpu_to_le32((3 << 4) | (1 << 14) |
- (0xa << 16) | (1 << 7));
+ cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, 0) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE, USB_LSE_GBPS) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST,
+ USB_ST_SYMMETRIC_TX) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP, USB_LP_SSP) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, 10));
}
return le16_to_cpu(bos->wTotalLength);
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v4 03/12] usb: gadget: Expose sublink speed attributes
2020-07-26 1:35 [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
2020-07-26 1:35 ` [PATCH v4 01/12] usb: ch9: Add sublink speed struct Thinh Nguyen
2020-07-26 1:36 ` [PATCH v4 02/12] usb: gadget: composite: Avoid using magic numbers Thinh Nguyen
@ 2020-07-26 1:36 ` Thinh Nguyen
2020-07-26 1:36 ` [PATCH v4 04/12] usb: gadget: Set max speed for SSP devices Thinh Nguyen
` (9 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Thinh Nguyen @ 2020-07-26 1:36 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, Thinh Nguyen, linux-usb; +Cc: John Youn
The USB 3.2 specification supports dual-lane and different transfer
rates for super-speed-plus. Devices operating in super-speed-plus can
be gen2x1, gen1x2, or gen2x2.
A gadget driver may need to know the gadget's sublink speeds to properly
setup its transfer requests and describe its capability in its
descriptors. To describe the transfer rate in super-speed-plus fully,
let's expose the lane count and sublink speed attributes when operating
in super-speed-plus.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v4:
- Change unsigned fields to unsigned int
Changes in v3:
- None
Changes in v2:
- None
include/linux/usb/gadget.h | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index 52ce1f6b8f83..d25aefaacba0 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -339,6 +339,15 @@ struct usb_gadget_ops {
* @speed: Speed of current connection to USB host.
* @max_speed: Maximal speed the UDC can handle. UDC must support this
* and all slower speeds.
+ * @num_lanes: Number of lanes in use.
+ * @max_num_lanes: Maximum number of lanes the UDC supports.
+ * @ssac: Sublink speed attribute count. The number of sublink speed
+ * attributes is ssac + 1.
+ * @sublink_speed: Array of sublink speed attributes the UDC supports. Sublink
+ * speed attributes are paired, and an RX followed by a TX attribute.
+ * @speed_ssid: Current sublink speed attribute ID in use.
+ * @min_speed_ssid: Sublink speed attribute ID with the minimum speed.
+ * @max_speed_ssid: Sublink speed attribute ID with the maximum speed.
* @state: the state we are now (attached, suspended, configured, etc)
* @name: Identifies the controller hardware type. Used in diagnostics
* and sometimes configuration.
@@ -406,6 +415,17 @@ struct usb_gadget {
struct list_head ep_list; /* of usb_ep */
enum usb_device_speed speed;
enum usb_device_speed max_speed;
+
+ /* SSP only */
+ unsigned int num_lanes;
+ unsigned int max_num_lanes;
+ unsigned int ssac;
+#define USB_GADGET_MAX_SSAC 3
+ struct usb_sublink_speed sublink_speed[USB_GADGET_MAX_SSAC + 1];
+ unsigned int speed_ssid;
+ unsigned int min_speed_ssid;
+ unsigned int max_speed_ssid;
+
enum usb_device_state state;
const char *name;
struct device dev;
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v4 04/12] usb: gadget: Set max speed for SSP devices
2020-07-26 1:35 [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
` (2 preceding siblings ...)
2020-07-26 1:36 ` [PATCH v4 03/12] usb: gadget: Expose sublink speed attributes Thinh Nguyen
@ 2020-07-26 1:36 ` Thinh Nguyen
2020-07-26 1:36 ` [PATCH v4 05/12] usb: composite: Properly report sublink speed Thinh Nguyen
` (8 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Thinh Nguyen @ 2020-07-26 1:36 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, Thinh Nguyen, linux-usb,
Peter Chen, Lee Jones, Alan Stern, Dejin Zheng, Roger Quadros
Cc: John Youn
A super-speed-plus device may operate at different sublink speeds (e.g.
gen2x2, gen1x2, or gen2x1). If the USB device supports different sublink
speeds at super-speed-plus, set the device to operate at the maximum
number of lanes and sublink speed possible. Introduce gadget ops
udc_set_num_lanes_and_speed to set the lane count and sublink speed for
super-speed-plus capable devices.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v4:
- Add identifier name for usb_gadget in gadget ops
(*udc_set_num_lanes_and_speed) to avoid checkpatch warning
Changes in v3:
- None
Changes in v2:
- None
drivers/usb/gadget/udc/core.c | 24 +++++++++++++++++++-----
include/linux/usb/gadget.h | 3 +++
2 files changed, 22 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c
index 4f82bcd31fd3..e5f569dc9ee0 100644
--- a/drivers/usb/gadget/udc/core.c
+++ b/drivers/usb/gadget/udc/core.c
@@ -1114,12 +1114,26 @@ static inline void usb_gadget_udc_stop(struct usb_udc *udc)
static inline void usb_gadget_udc_set_speed(struct usb_udc *udc,
enum usb_device_speed speed)
{
- if (udc->gadget->ops->udc_set_speed) {
- enum usb_device_speed s;
+ struct usb_gadget *gadget = udc->gadget;
+ enum usb_device_speed s;
- s = min(speed, udc->gadget->max_speed);
- udc->gadget->ops->udc_set_speed(udc->gadget, s);
- }
+ if (speed == USB_SPEED_UNKNOWN)
+ s = gadget->max_speed;
+ else
+ s = min(speed, gadget->max_speed);
+
+ /*
+ * If the UDC supports super-speed-plus and different sublink speeds,
+ * then set the gadget to the max possible sublink speed for
+ * super-speed-plus symmetric lanes.
+ */
+ if (s == USB_SPEED_SUPER_PLUS &&
+ gadget->ops->udc_set_num_lanes_and_speed)
+ gadget->ops->udc_set_num_lanes_and_speed(gadget,
+ gadget->max_num_lanes,
+ gadget->max_speed_ssid);
+ else if (gadget->ops->udc_set_speed)
+ gadget->ops->udc_set_speed(gadget, s);
}
/**
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index d25aefaacba0..3bbd8d7a80ad 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -323,6 +323,9 @@ struct usb_gadget_ops {
struct usb_gadget_driver *);
int (*udc_stop)(struct usb_gadget *);
void (*udc_set_speed)(struct usb_gadget *, enum usb_device_speed);
+ void (*udc_set_num_lanes_and_speed)(struct usb_gadget *gadget,
+ unsigned int num_lanes,
+ unsigned int ssid);
struct usb_ep *(*match_ep)(struct usb_gadget *,
struct usb_endpoint_descriptor *,
struct usb_ss_ep_comp_descriptor *);
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v4 05/12] usb: composite: Properly report sublink speed
2020-07-26 1:35 [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
` (3 preceding siblings ...)
2020-07-26 1:36 ` [PATCH v4 04/12] usb: gadget: Set max speed for SSP devices Thinh Nguyen
@ 2020-07-26 1:36 ` Thinh Nguyen
2020-07-26 1:36 ` [PATCH v4 06/12] usb: devicetree: Include USB SSP Gen X x Y Thinh Nguyen
` (7 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Thinh Nguyen @ 2020-07-26 1:36 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, Thinh Nguyen, linux-usb; +Cc: John Youn
Use the max sublink speed attributes reported in the gadget structure
to write to the super-speed-plus BOS descriptor if available.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v4:
- None
Changes in v3:
- None
Changes in v2:
- None
drivers/usb/gadget/composite.c | 76 +++++++++++++++++++++++++++++-------------
1 file changed, 52 insertions(+), 24 deletions(-)
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 0aa4cb49aa53..2d0b7af4b08f 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -729,45 +729,73 @@ static int bos_desc(struct usb_composite_dev *cdev)
/* The SuperSpeedPlus USB Device Capability descriptor */
if (gadget_is_superspeed_plus(cdev->gadget)) {
struct usb_ssp_cap_descriptor *ssp_cap;
+ unsigned int ssac = 1;
+ unsigned int ssic = 0;
+ unsigned int min_ssid = 0;
+ int i;
+
+ if (cdev->gadget->ssac) {
+ ssac = cdev->gadget->ssac;
+
+ /*
+ * Paired RX and TX sublink speed attributes share
+ * the same SSID.
+ */
+ ssic = (ssac + 1) / 2 - 1;
+ min_ssid = cdev->gadget->min_speed_ssid;
+ }
ssp_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
bos->bNumDeviceCaps++;
- /*
- * Report typical values.
- */
-
- le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SSP_CAP_SIZE(1));
- ssp_cap->bLength = USB_DT_USB_SSP_CAP_SIZE(1);
+ le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SSP_CAP_SIZE(ssac));
+ ssp_cap->bLength = USB_DT_USB_SSP_CAP_SIZE(ssac);
ssp_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
ssp_cap->bDevCapabilityType = USB_SSP_CAP_TYPE;
ssp_cap->bReserved = 0;
ssp_cap->wReserved = 0;
ssp_cap->bmAttributes =
- cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_ATTRIBS, 1) |
- FIELD_PREP(USB_SSP_SUBLINK_SPEED_IDS, 0));
+ cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_ATTRIBS, ssac) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_IDS, ssic));
ssp_cap->wFunctionalitySupport =
- cpu_to_le16(FIELD_PREP(USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID, 0) |
+ cpu_to_le16(FIELD_PREP(USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID, min_ssid) |
FIELD_PREP(USB_SSP_MIN_RX_LANE_COUNT, 1) |
FIELD_PREP(USB_SSP_MIN_TX_LANE_COUNT, 1));
- ssp_cap->bmSublinkSpeedAttr[0] =
- cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, 0) |
- FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE, USB_LSE_GBPS) |
- FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST,
- USB_ST_SYMMETRIC_RX) |
- FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP, USB_LP_SSP) |
- FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, 10));
-
- ssp_cap->bmSublinkSpeedAttr[1] =
- cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, 0) |
- FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE, USB_LSE_GBPS) |
- FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST,
- USB_ST_SYMMETRIC_TX) |
- FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP, USB_LP_SSP) |
- FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, 10));
+ /*
+ * If the sublink speed attributes are not specified, then the
+ * default will be a pair symmetric RX/TX sublink speed
+ * attributes of 10 Gbps.
+ */
+ for (i = 0; i < ssac + 1; i++) {
+ struct usb_sublink_speed default_ssa;
+ struct usb_sublink_speed *ptr;
+
+ if (cdev->gadget->ssac) {
+ ptr = &cdev->gadget->sublink_speed[i];
+ } else {
+ default_ssa.id = i / 2;
+ default_ssa.protocol = USB_LP_SSP;
+ default_ssa.exponent = USB_LSE_GBPS;
+ default_ssa.mantissa = 10;
+
+ if (i % 2)
+ default_ssa.type = USB_ST_SYMMETRIC_TX;
+ else
+ default_ssa.type = USB_ST_SYMMETRIC_RX;
+
+ ptr = &default_ssa;
+ }
+
+ ssp_cap->bmSublinkSpeedAttr[i] =
+ cpu_to_le32(FIELD_PREP(USB_SSP_SUBLINK_SPEED_SSID, ptr->id) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSE, ptr->exponent) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_ST, ptr->type) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_LP, ptr->protocol) |
+ FIELD_PREP(USB_SSP_SUBLINK_SPEED_LSM, ptr->mantissa));
+ }
}
return le16_to_cpu(bos->wTotalLength);
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v4 06/12] usb: devicetree: Include USB SSP Gen X x Y
2020-07-26 1:35 [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
` (4 preceding siblings ...)
2020-07-26 1:36 ` [PATCH v4 05/12] usb: composite: Properly report sublink speed Thinh Nguyen
@ 2020-07-26 1:36 ` Thinh Nguyen
2020-07-31 20:21 ` Rob Herring
2020-07-26 1:36 ` [PATCH v4 07/12] usb: common: Add and update common functions for SSP speeds Thinh Nguyen
` (6 subsequent siblings)
12 siblings, 1 reply; 16+ messages in thread
From: Thinh Nguyen @ 2020-07-26 1:36 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, Thinh Nguyen, linux-usb,
devicetree, Rob Herring
Cc: John Youn
According to the USB 3.2 spec, a super-speed-plus device can operate at
gen2x2, gen2x1, or gen1x2. If the USB controller device supports
multiple lanes at different transfer rates, the user can specify the HW
capability via these new speed strings:
"super-speed-plus-gen2x2"
"super-speed-plus-gen2x1"
"super-speed-plus-gen1x2"
If the argument is simply "super-speed-plus", USB controllers should
default to their maximum transfer rate and number of lanes.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v4:
- None
Changes in v3:
- Use "maximum-speed" to include both the num-lane and transfer rate for SSP
- Remove "num-lanes" and "lane-speed-mantissa-gbps" properties
Changes in v2:
- Make "num-lanes" and "lane-speed-mantissa-gbps" common USB properties
Documentation/devicetree/bindings/usb/generic.txt | 11 +++++++----
1 file changed, 7 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/generic.txt b/Documentation/devicetree/bindings/usb/generic.txt
index ba472e7aefc9..8541b9571f2f 100644
--- a/Documentation/devicetree/bindings/usb/generic.txt
+++ b/Documentation/devicetree/bindings/usb/generic.txt
@@ -3,10 +3,13 @@ Generic USB Properties
Optional properties:
- maximum-speed: tells USB controllers we want to work up to a certain
speed. Valid arguments are "super-speed-plus",
- "super-speed", "high-speed", "full-speed" and
- "low-speed". In case this isn't passed via DT, USB
- controllers should default to their maximum HW
- capability.
+ "super-speed-plus-gen2x2", "super-speed-plus-gen2x1",
+ "super-speed-plus-gen1x2", "super-speed", "high-speed",
+ "full-speed" and "low-speed". In case this isn't passed
+ via DT, USB controllers should default to their maximum
+ HW capability. Similarly, if the argument is
+ "super-speed-plus", USB controllers should default to
+ their maximum transfer rate and number of lanes.
- dr_mode: tells Dual-Role USB controllers that we want to work on a
particular mode. Valid arguments are "host",
"peripheral" and "otg". In case this attribute isn't
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v4 06/12] usb: devicetree: Include USB SSP Gen X x Y
2020-07-26 1:36 ` [PATCH v4 06/12] usb: devicetree: Include USB SSP Gen X x Y Thinh Nguyen
@ 2020-07-31 20:21 ` Rob Herring
2020-08-01 2:36 ` Thinh Nguyen
0 siblings, 1 reply; 16+ messages in thread
From: Rob Herring @ 2020-07-31 20:21 UTC (permalink / raw)
To: Thinh Nguyen
Cc: John Youn, Rob Herring, Greg Kroah-Hartman, Felipe Balbi,
linux-usb, devicetree
On Sat, 25 Jul 2020 18:36:32 -0700, Thinh Nguyen wrote:
> According to the USB 3.2 spec, a super-speed-plus device can operate at
> gen2x2, gen2x1, or gen1x2. If the USB controller device supports
> multiple lanes at different transfer rates, the user can specify the HW
> capability via these new speed strings:
>
> "super-speed-plus-gen2x2"
> "super-speed-plus-gen2x1"
> "super-speed-plus-gen1x2"
>
> If the argument is simply "super-speed-plus", USB controllers should
> default to their maximum transfer rate and number of lanes.
>
> Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
> ---
> Changes in v4:
> - None
> Changes in v3:
> - Use "maximum-speed" to include both the num-lane and transfer rate for SSP
> - Remove "num-lanes" and "lane-speed-mantissa-gbps" properties
> Changes in v2:
> - Make "num-lanes" and "lane-speed-mantissa-gbps" common USB properties
>
> Documentation/devicetree/bindings/usb/generic.txt | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
Reviewed-by: Rob Herring <robh@kernel.org>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: [PATCH v4 06/12] usb: devicetree: Include USB SSP Gen X x Y
2020-07-31 20:21 ` Rob Herring
@ 2020-08-01 2:36 ` Thinh Nguyen
0 siblings, 0 replies; 16+ messages in thread
From: Thinh Nguyen @ 2020-08-01 2:36 UTC (permalink / raw)
To: Rob Herring, Thinh Nguyen
Cc: John Youn, Rob Herring, Greg Kroah-Hartman, Felipe Balbi,
linux-usb, devicetree
Rob Herring wrote:
> On Sat, 25 Jul 2020 18:36:32 -0700, Thinh Nguyen wrote:
>> According to the USB 3.2 spec, a super-speed-plus device can operate at
>> gen2x2, gen2x1, or gen1x2. If the USB controller device supports
>> multiple lanes at different transfer rates, the user can specify the HW
>> capability via these new speed strings:
>>
>> "super-speed-plus-gen2x2"
>> "super-speed-plus-gen2x1"
>> "super-speed-plus-gen1x2"
>>
>> If the argument is simply "super-speed-plus", USB controllers should
>> default to their maximum transfer rate and number of lanes.
>>
>> Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
>> ---
>> Changes in v4:
>> - None
>> Changes in v3:
>> - Use "maximum-speed" to include both the num-lane and transfer rate for SSP
>> - Remove "num-lanes" and "lane-speed-mantissa-gbps" properties
>> Changes in v2:
>> - Make "num-lanes" and "lane-speed-mantissa-gbps" common USB properties
>>
>> Documentation/devicetree/bindings/usb/generic.txt | 11 +++++++----
>> 1 file changed, 7 insertions(+), 4 deletions(-)
>>
> Reviewed-by: Rob Herring <robh@kernel.org>
Thanks!
Thinh
^ permalink raw reply [flat|nested] 16+ messages in thread
* [PATCH v4 07/12] usb: common: Add and update common functions for SSP speeds
2020-07-26 1:35 [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
` (5 preceding siblings ...)
2020-07-26 1:36 ` [PATCH v4 06/12] usb: devicetree: Include USB SSP Gen X x Y Thinh Nguyen
@ 2020-07-26 1:36 ` Thinh Nguyen
2020-07-26 1:36 ` [PATCH v4 08/12] usb: dwc3: Initialize lane count and sublink speed Thinh Nguyen
` (5 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Thinh Nguyen @ 2020-07-26 1:36 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, Thinh Nguyen, linux-usb; +Cc: John Youn
The USB "maximum-speed" property now can take these new strings for
super-speed-plus:
"super-speed-plus-gen2x2"
"super-speed-plus-gen2x1"
"super-speed-plus-gen1x2"
As a result, let's do the follow:
* Update usb_get_maximum_speed() to parse these new speed strings
* Add 2 new common functions to get the Gen number and number of lanes
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v4:
- Create 2 functions to get the SSP gen and number of lanes from "maximum-speed" property
- Update usb_get_maximum_speed() to check new SSP strings with genXxY
- Update commit message and subject title to reflect the new changes
Changes in v3:
- Add new function to parse "maximum-speed" for lanes and transfer rate
- Remove separate functions getting num_lanes and transfer rate properties
Changes in v2:
- New commit
drivers/usb/common/common.c | 46 ++++++++++++++++++++++++++++++++++++++++++++-
include/linux/usb/ch9.h | 30 +++++++++++++++++++++++++++++
2 files changed, 75 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/common/common.c b/drivers/usb/common/common.c
index 1433260d99b4..b3b3972d5be7 100644
--- a/drivers/usb/common/common.c
+++ b/drivers/usb/common/common.c
@@ -86,12 +86,56 @@ enum usb_device_speed usb_get_maximum_speed(struct device *dev)
if (ret < 0)
return USB_SPEED_UNKNOWN;
- ret = match_string(speed_names, ARRAY_SIZE(speed_names), maximum_speed);
+ if (strncmp("super-speed-plus-gen2x2", maximum_speed, 23) == 0 ||
+ strncmp("super-speed-plus-gen2x1", maximum_speed, 23) == 0 ||
+ strncmp("super-speed-plus-gen1x2", maximum_speed, 23) == 0)
+ return USB_SPEED_SUPER_PLUS;
+ ret = match_string(speed_names, ARRAY_SIZE(speed_names), maximum_speed);
return (ret < 0) ? USB_SPEED_UNKNOWN : ret;
}
EXPORT_SYMBOL_GPL(usb_get_maximum_speed);
+u8 usb_get_ssp_num_lanes(struct device *dev)
+{
+ const char *maximum_speed;
+ int ret;
+
+ ret = device_property_read_string(dev, "maximum-speed", &maximum_speed);
+ if (ret < 0)
+ return 0;
+
+ if (strncmp("super-speed-plus-gen2x1", maximum_speed, 23) == 0)
+ return 1;
+
+ if (strncmp("super-speed-plus-gen2x2", maximum_speed, 23) == 0 ||
+ strncmp("super-speed-plus-gen1x2", maximum_speed, 23) == 0)
+ return 2;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_get_ssp_num_lanes);
+
+enum usb_phy_gen usb_get_ssp_phy_gen(struct device *dev)
+{
+ const char *maximum_speed;
+ int ret;
+
+ ret = device_property_read_string(dev, "maximum-speed", &maximum_speed);
+ if (ret < 0)
+ return USB_PHY_GEN_UNKNOWN;
+
+ if (strncmp("super-speed-plus-gen1x2", maximum_speed, 23) == 0)
+ return USB_PHY_GEN_1;
+
+ if (strncmp("super-speed-plus-gen2x2", maximum_speed, 23) == 0 ||
+ strncmp("super-speed-plus-gen2x1", maximum_speed, 23) == 0)
+ return USB_PHY_GEN_2;
+
+ return USB_PHY_GEN_UNKNOWN;
+}
+EXPORT_SYMBOL_GPL(usb_get_ssp_phy_gen);
+
const char *usb_state_string(enum usb_device_state state)
{
static const char *const names[] = {
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 01191649a0ad..bd13d27551e5 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -57,6 +57,13 @@ enum usb_link_protocol {
USB_LP_SSP = 1,
};
+/* USB phy signaling rate generation */
+enum usb_phy_gen {
+ USB_PHY_GEN_UNKNOWN,
+ USB_PHY_GEN_1,
+ USB_PHY_GEN_2,
+};
+
/**
* struct usb_sublink_speed - sublink speed attribute
* @id: sublink speed attribute ID (SSID)
@@ -105,6 +112,29 @@ extern const char *usb_speed_string(enum usb_device_speed speed);
*/
extern enum usb_device_speed usb_get_maximum_speed(struct device *dev);
+/**
+ * usb_get_ssp_num_lanes - Get requested number of lanes for a given
+ * super-speed-plus capable USB controller.
+ * @dev: Pointer to the given USB controller device
+ *
+ * If the string from "maximum-speed" property is super-speed-plus-genXxY where
+ * 'Y' is the number of lanes, then this function returns 1 for single lane and
+ * 2 for dual-lane base on 'Y'. If the number of lanes is not specified, then it
+ * returns 0.
+ */
+extern u8 usb_get_ssp_num_lanes(struct device *dev);
+
+/**
+ * usb_get_ssp_phy_gen - Get requested phy signaling rate generation for a given
+ * super-speed-plus capable USB controller.
+ * @dev: Pointer to the given USB controller device
+ *
+ * If the string from "maximum-speed" property is super-speed-plus-genXxY where
+ * 'X' is the Gen number, then this function returns the corresponding enum
+ * usb_phy_gen base on 'X'.
+ */
+extern enum usb_phy_gen usb_get_ssp_phy_gen(struct device *dev);
+
/**
* usb_state_string - Returns human readable name for the state.
* @state: The state to return a human-readable name for. If it's not
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v4 08/12] usb: dwc3: Initialize lane count and sublink speed
2020-07-26 1:35 [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
` (6 preceding siblings ...)
2020-07-26 1:36 ` [PATCH v4 07/12] usb: common: Add and update common functions for SSP speeds Thinh Nguyen
@ 2020-07-26 1:36 ` Thinh Nguyen
2020-07-26 1:36 ` [PATCH v4 09/12] usb: dwc3: gadget: Report sublink speed capability Thinh Nguyen
` (4 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Thinh Nguyen @ 2020-07-26 1:36 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, Thinh Nguyen, linux-usb; +Cc: John Youn
DWC_usb32 supports dual-lane operating at different sublink speeds.
Initialize and validate the maximum number of lanes and speed the
controller supports in the maximum_speed property.
Currently the controller has no visibility into the HW parameter to
determine the maximum number of lanes the HW supports. If the number of
lanes is not specified, then set the default to 2 for DWC_usb32 and 1
for DWC_usb31 for SSP.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v4:
- Use new common funtions to get SSP Gen and number of lanes
Changes in v3:
- Use new common function to get maximum-speed
- Remove num_lanes and lsm validation since they are no longer separate
properties
- Replace dwc->maxmum_lsm field with dwc->maximum_ssp_rate for gen1/gen2
Changes in v2:
- Use common functions to get num_lanes and lsm properties
drivers/usb/dwc3/core.c | 29 +++++++++++++++++++++++++++++
drivers/usb/dwc3/core.h | 6 ++++++
2 files changed, 35 insertions(+)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index b2ea96d2db04..d3604c74cac5 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1268,6 +1268,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
hird_threshold = 12;
dwc->maximum_speed = usb_get_maximum_speed(dev);
+ dwc->maximum_phy_gen = usb_get_ssp_phy_gen(dev);
+ dwc->maximum_num_lanes = usb_get_ssp_num_lanes(dev);
dwc->dr_mode = usb_get_dr_mode(dev);
dwc->hsphy_mode = of_usb_get_phy_mode(dev->of_node);
@@ -1436,6 +1438,33 @@ static void dwc3_check_params(struct dwc3 *dwc)
}
break;
}
+
+ /*
+ * Currently the controller does not have visibility into the HW
+ * parameter to determine the maximum number of lanes the HW
+ * supports. If the number of lanes is not specified in the
+ * device property, then set the default to 2 for DWC_usb32 and
+ * 1 for DWC_usb31 for super-speed-plus.
+ */
+ if (dwc->maximum_speed == USB_SPEED_SUPER_PLUS) {
+ if (DWC3_IP_IS(DWC32)) {
+ if (dwc->maximum_phy_gen == USB_PHY_GEN_UNKNOWN)
+ dwc->maximum_phy_gen = USB_PHY_GEN_2;
+
+ if (!dwc->maximum_num_lanes)
+ dwc->maximum_num_lanes = 2;
+
+ } else if (DWC3_IP_IS(DWC31)) {
+ if (dwc->maximum_num_lanes > 1)
+ dev_warn(dev, "UDC doesn't support multi-lanes\n");
+
+ dwc->maximum_phy_gen = USB_PHY_GEN_2;
+ dwc->maximum_num_lanes = 1;
+ }
+ } else {
+ dwc->maximum_phy_gen = USB_PHY_GEN_UNKNOWN;
+ dwc->maximum_num_lanes = 0;
+ }
}
static int dwc3_probe(struct platform_device *pdev)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 2f04b3e42bf1..3bbfbeaa67d8 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -958,6 +958,8 @@ struct dwc3_scratchpad_array {
* @nr_scratch: number of scratch buffers
* @u1u2: only used on revisions <1.83a for workaround
* @maximum_speed: maximum speed requested (mainly for testing purposes)
+ * @maximum_phy_gen: maximum phy signaling rate
+ * @maximum_num_lanes: maximum number of lanes
* @ip: controller's ID
* @revision: controller's version of an IP
* @version_type: VERSIONTYPE register contents, a sub release of a revision
@@ -988,6 +990,7 @@ struct dwc3_scratchpad_array {
* @ep0state: state of endpoint zero
* @link_state: link state
* @speed: device speed (super, high, full, low)
+ * @num_lanes: number of connected lanes
* @hwparams: copy of hwparams registers
* @root: debugfs root folder pointer
* @regset: debugfs pointer to regdump file
@@ -1119,6 +1122,8 @@ struct dwc3 {
u32 nr_scratch;
u32 u1u2;
u32 maximum_speed;
+ enum usb_phy_gen maximum_phy_gen;
+ u8 maximum_num_lanes;
u32 ip;
@@ -1184,6 +1189,7 @@ struct dwc3 {
u8 u1pel;
u8 speed;
+ u8 num_lanes;
u8 num_eps;
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v4 09/12] usb: dwc3: gadget: Report sublink speed capability
2020-07-26 1:35 [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
` (7 preceding siblings ...)
2020-07-26 1:36 ` [PATCH v4 08/12] usb: dwc3: Initialize lane count and sublink speed Thinh Nguyen
@ 2020-07-26 1:36 ` Thinh Nguyen
2020-07-26 1:36 ` [PATCH v4 10/12] usb: dwc3: gadget: Implement setting of sublink speed Thinh Nguyen
` (3 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Thinh Nguyen @ 2020-07-26 1:36 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, Thinh Nguyen, linux-usb; +Cc: John Youn
Report the sublink speed attributes to the usb_gadget structure based on
the HW capability from the device maximum_speed property.
Only DWC_usb32 supports 2 sublink speeds if it can operate with 2 lanes.
(i.e. at SSP, it can operate as gen1x2)
Note: the SSID DWC3_SSP_SSID_GEN2 and DWC3_SSP_SSID_GEN1 are arbitrary.
There's no standard according to the USB 3.2 spec as long as they are
unique and within 0-15.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v4:
- None
Changes in v3:
- Update commit with updated field name
- No longer use DWC3_LSM_5/10_GBPS macros
Changes in v2:
- Fix missing check for gen1x2 when writing to sublink speed attributes
- Minor fix in commit message (first commit sentence ended with comma)
drivers/usb/dwc3/core.h | 4 ++++
drivers/usb/dwc3/gadget.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 53 insertions(+)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 3bbfbeaa67d8..0ec675327014 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -40,6 +40,10 @@
#define DWC3_XHCI_RESOURCES_NUM 2
#define DWC3_ISOC_MAX_RETRIES 5
+/* Sublink Speed Attribute ID */
+#define DWC3_SSP_SSID_GEN2 2
+#define DWC3_SSP_SSID_GEN1 1
+
#define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */
#define DWC3_EVENT_BUFFERS_SIZE 4096
#define DWC3_EVENT_TYPE_MASK 0xfe
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index e44bfc3b5096..3038dae970f3 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3686,6 +3686,55 @@ int dwc3_gadget_init(struct dwc3 *dwc)
dwc->revision);
dwc->gadget.max_speed = dwc->maximum_speed;
+ dwc->gadget.max_num_lanes = dwc->maximum_num_lanes;
+
+ if (dwc->maximum_speed == USB_SPEED_SUPER_PLUS) {
+ struct usb_sublink_speed *ssa;
+ int i;
+
+ /*
+ * Multiple sublink speeds are only available to DWC_usb32
+ * devices that can operate at gen2x2 max.
+ */
+ if (dwc->maximum_phy_gen == USB_PHY_GEN_2 &&
+ dwc->maximum_num_lanes == 2) {
+ dwc->gadget.ssac = 3;
+ dwc->gadget.min_speed_ssid = DWC3_SSP_SSID_GEN1;
+ dwc->gadget.max_speed_ssid = DWC3_SSP_SSID_GEN2;
+ } else if (dwc->maximum_phy_gen == USB_PHY_GEN_1 &&
+ dwc->maximum_num_lanes == 2) {
+ dwc->gadget.ssac = 1;
+ dwc->gadget.min_speed_ssid = DWC3_SSP_SSID_GEN1;
+ dwc->gadget.max_speed_ssid = DWC3_SSP_SSID_GEN1;
+ } else {
+ dwc->gadget.ssac = 1;
+ dwc->gadget.min_speed_ssid = DWC3_SSP_SSID_GEN2;
+ dwc->gadget.max_speed_ssid = DWC3_SSP_SSID_GEN2;
+ }
+
+ for (i = 0; i < dwc->gadget.ssac + 1; i++) {
+ ssa = &dwc->gadget.sublink_speed[i];
+
+ if (dwc->gadget.ssac > 1 && i > 1)
+ ssa->id = dwc->gadget.max_speed_ssid;
+ else
+ ssa->id = dwc->gadget.min_speed_ssid;
+
+ if (ssa->id == DWC3_SSP_SSID_GEN1)
+ ssa->mantissa = 5;
+ else
+ ssa->mantissa = 10;
+
+ /* First attribute is RX followed by TX */
+ if (i % 2)
+ ssa->type = USB_ST_SYMMETRIC_TX;
+ else
+ ssa->type = USB_ST_SYMMETRIC_RX;
+
+ ssa->exponent = USB_LSE_GBPS;
+ ssa->protocol = USB_LP_SSP;
+ }
+ }
/*
* REVISIT: Here we should clear all pending IRQs to be
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v4 10/12] usb: dwc3: gadget: Implement setting of sublink speed
2020-07-26 1:35 [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
` (8 preceding siblings ...)
2020-07-26 1:36 ` [PATCH v4 09/12] usb: dwc3: gadget: Report sublink speed capability Thinh Nguyen
@ 2020-07-26 1:36 ` Thinh Nguyen
2020-07-26 1:37 ` [PATCH v4 11/12] usb: dwc3: gadget: Track connected lane and " Thinh Nguyen
` (2 subsequent siblings)
12 siblings, 0 replies; 16+ messages in thread
From: Thinh Nguyen @ 2020-07-26 1:36 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, Thinh Nguyen, linux-usb; +Cc: John Youn
Implement gadget ops udc_set_num_lanes_and_speed. This allows the
gadget/core driver to select number of lanes to use and the sublink
speed the controller supports.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v4:
- None
Changes in v3:
- None
Changes in v2:
- None
drivers/usb/dwc3/core.h | 2 ++
drivers/usb/dwc3/gadget.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++-
2 files changed, 65 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 0ec675327014..9466c4c36963 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -385,6 +385,8 @@
#define DWC3_GUCTL2_RST_ACTBITLATER BIT(14)
/* Device Configuration Register */
+#define DWC3_DCFG_NUMLANES(n) (((n) & 0x3) << 30) /* DWC_usb32 only */
+
#define DWC3_DCFG_DEVADDR(addr) ((addr) << 3)
#define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 3038dae970f3..b7da4e1c81aa 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2333,6 +2333,62 @@ static void dwc3_gadget_set_speed(struct usb_gadget *g,
spin_unlock_irqrestore(&dwc->lock, flags);
}
+static void dwc3_gadget_set_num_lanes_and_speed(struct usb_gadget *g,
+ unsigned int num_lanes,
+ unsigned int ssid)
+{
+ struct dwc3 *dwc = gadget_to_dwc(g);
+ struct usb_sublink_speed *ssa = NULL;
+ unsigned int lanes;
+ unsigned long flags;
+ u32 reg;
+ int i;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+ if (dwc->maximum_speed < USB_SPEED_SUPER_PLUS)
+ goto done;
+
+ for (i = 0; i < g->ssac + 1; i++) {
+ if (g->sublink_speed[i].id == ssid) {
+ ssa = &g->sublink_speed[i];
+ break;
+ }
+ }
+
+ if (!ssa) {
+ dev_err(dwc->dev, "SSID not found (%d)\n", ssid);
+ goto done;
+ }
+
+ reg = dwc3_readl(dwc->regs, DWC3_DCFG);
+ reg &= ~DWC3_DCFG_SPEED_MASK;
+
+ switch (ssa->mantissa) {
+ case 5:
+ reg |= DWC3_DCFG_SUPERSPEED;
+ break;
+ case 10:
+ reg |= DWC3_DCFG_SUPERSPEED_PLUS;
+ break;
+ default:
+ dev_err(dwc->dev, "invalid lane speed mantissa (%d)\n",
+ ssa->mantissa);
+ goto done;
+ }
+
+ /* Lane configuration is only available to DWC_usb32 */
+ if (DWC3_IP_IS(DWC32)) {
+ lanes = clamp_t(unsigned int, num_lanes, 1,
+ dwc->maximum_num_lanes);
+ reg &= ~DWC3_DCFG_NUMLANES(~0);
+ reg |= DWC3_DCFG_NUMLANES(lanes - 1);
+ }
+
+ dwc3_writel(dwc->regs, DWC3_DCFG, reg);
+done:
+ spin_unlock_irqrestore(&dwc->lock, flags);
+}
+
static const struct usb_gadget_ops dwc3_gadget_ops = {
.get_frame = dwc3_gadget_get_frame,
.wakeup = dwc3_gadget_wakeup,
@@ -2341,6 +2397,7 @@ static const struct usb_gadget_ops dwc3_gadget_ops = {
.udc_start = dwc3_gadget_start,
.udc_stop = dwc3_gadget_stop,
.udc_set_speed = dwc3_gadget_set_speed,
+ .udc_set_num_lanes_and_speed = dwc3_gadget_set_num_lanes_and_speed,
.get_config_params = dwc3_gadget_config_params,
};
@@ -3751,7 +3808,12 @@ int dwc3_gadget_init(struct dwc3 *dwc)
goto err4;
}
- dwc3_gadget_set_speed(&dwc->gadget, dwc->maximum_speed);
+ if (DWC3_IP_IS(DWC32) && dwc->maximum_speed == USB_SPEED_SUPER_PLUS)
+ dwc3_gadget_set_num_lanes_and_speed(&dwc->gadget,
+ dwc->maximum_num_lanes,
+ dwc->gadget.max_speed_ssid);
+ else
+ dwc3_gadget_set_speed(&dwc->gadget, dwc->maximum_speed);
return 0;
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v4 11/12] usb: dwc3: gadget: Track connected lane and sublink speed
2020-07-26 1:35 [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
` (9 preceding siblings ...)
2020-07-26 1:36 ` [PATCH v4 10/12] usb: dwc3: gadget: Implement setting of sublink speed Thinh Nguyen
@ 2020-07-26 1:37 ` Thinh Nguyen
2020-07-26 1:37 ` [PATCH v4 12/12] usb: dwc3: gadget: Set speed only up to the max supported Thinh Nguyen
2020-09-05 0:53 ` [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
12 siblings, 0 replies; 16+ messages in thread
From: Thinh Nguyen @ 2020-07-26 1:37 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, Thinh Nguyen, linux-usb; +Cc: John Youn
Track the number of lanes connected in gadget->num_lanes and track the
current sublink speed attribute ID for super-speed-plus operations.
Note: if the device is running in gen1x2, set the gadget->speed to
USB_SPEED_SUPER_PLUS.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v4:
- None
Changes in v3:
- None
Changes in v2:
- None
drivers/usb/dwc3/core.h | 2 ++
drivers/usb/dwc3/gadget.c | 21 ++++++++++++++++++++-
2 files changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 9466c4c36963..4a70b1e4d2a7 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -460,6 +460,8 @@
#define DWC3_DEVTEN_USBRSTEN BIT(1)
#define DWC3_DEVTEN_DISCONNEVTEN BIT(0)
+#define DWC3_DSTS_CONNLANES(n) (((n) >> 30) & 0x3) /* DWC_usb32 only */
+
/* Device Status Register */
#define DWC3_DSTS_DCNRD BIT(29)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index b7da4e1c81aa..05defaf0f745 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2328,6 +2328,10 @@ static void dwc3_gadget_set_speed(struct usb_gadget *g,
reg |= DWC3_DCFG_SUPERSPEED_PLUS;
}
}
+
+ if (DWC3_IP_IS(DWC32) && speed < USB_SPEED_SUPER_PLUS)
+ reg &= ~DWC3_DCFG_NUMLANES(~0);
+
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
spin_unlock_irqrestore(&dwc->lock, flags);
@@ -3199,12 +3203,19 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
struct dwc3_ep *dep;
int ret;
u32 reg;
+ u8 lanes = 1;
u8 speed;
reg = dwc3_readl(dwc->regs, DWC3_DSTS);
speed = reg & DWC3_DSTS_CONNECTSPD;
dwc->speed = speed;
+ if (DWC3_IP_IS(DWC32))
+ lanes = DWC3_DSTS_CONNLANES(reg) + 1;
+
+ dwc->gadget.num_lanes = lanes;
+ dwc->gadget.speed_ssid = 0;
+
/*
* RAMClkSel is reset to 0 after USB reset, so it must be reprogrammed
* each time on Connect Done.
@@ -3219,6 +3230,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
dwc->gadget.ep0->maxpacket = 512;
dwc->gadget.speed = USB_SPEED_SUPER_PLUS;
+ dwc->gadget.speed_ssid = DWC3_SSP_SSID_GEN2;
break;
case DWC3_DSTS_SUPERSPEED:
/*
@@ -3239,7 +3251,13 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc)
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
dwc->gadget.ep0->maxpacket = 512;
- dwc->gadget.speed = USB_SPEED_SUPER;
+
+ if (lanes > 1) {
+ dwc->gadget.speed = USB_SPEED_SUPER_PLUS;
+ dwc->gadget.speed_ssid = DWC3_SSP_SSID_GEN1;
+ } else {
+ dwc->gadget.speed = USB_SPEED_SUPER;
+ }
break;
case DWC3_DSTS_HIGHSPEED:
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(64);
@@ -3720,6 +3738,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
dwc->gadget.sg_supported = true;
dwc->gadget.name = "dwc3-gadget";
dwc->gadget.lpm_capable = true;
+ dwc->gadget.num_lanes = 1;
/*
* FIXME We might be setting max_speed to <SUPER, however versions
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* [PATCH v4 12/12] usb: dwc3: gadget: Set speed only up to the max supported
2020-07-26 1:35 [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
` (10 preceding siblings ...)
2020-07-26 1:37 ` [PATCH v4 11/12] usb: dwc3: gadget: Track connected lane and " Thinh Nguyen
@ 2020-07-26 1:37 ` Thinh Nguyen
2020-09-05 0:53 ` [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
12 siblings, 0 replies; 16+ messages in thread
From: Thinh Nguyen @ 2020-07-26 1:37 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, Thinh Nguyen, linux-usb; +Cc: John Youn
The setting of device speed should be limited by the device's
maximum_speed. This patch adds a check and prevent the driver from
attempting to configure higher than the maximum_speed.
Signed-off-by: Thinh Nguyen <thinhn@synopsys.com>
---
Changes in v4:
- None
Changes in v3:
- None
Changes in v2:
- None
drivers/usb/dwc3/gadget.c | 11 ++++++++---
1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 05defaf0f745..f62a9519287a 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -2276,6 +2276,7 @@ static void dwc3_gadget_set_speed(struct usb_gadget *g,
enum usb_device_speed speed)
{
struct dwc3 *dwc = gadget_to_dwc(g);
+ enum usb_device_speed selected_speed = speed;
unsigned long flags;
u32 reg;
@@ -2300,7 +2301,10 @@ static void dwc3_gadget_set_speed(struct usb_gadget *g,
!dwc->dis_metastability_quirk) {
reg |= DWC3_DCFG_SUPERSPEED;
} else {
- switch (speed) {
+ if (speed > dwc->maximum_speed)
+ selected_speed = dwc->maximum_speed;
+
+ switch (selected_speed) {
case USB_SPEED_LOW:
reg |= DWC3_DCFG_LOWSPEED;
break;
@@ -2320,7 +2324,8 @@ static void dwc3_gadget_set_speed(struct usb_gadget *g,
reg |= DWC3_DCFG_SUPERSPEED_PLUS;
break;
default:
- dev_err(dwc->dev, "invalid speed (%d)\n", speed);
+ dev_err(dwc->dev, "invalid speed (%d)\n",
+ selected_speed);
if (DWC3_IP_IS(DWC3))
reg |= DWC3_DCFG_SUPERSPEED;
@@ -2329,7 +2334,7 @@ static void dwc3_gadget_set_speed(struct usb_gadget *g,
}
}
- if (DWC3_IP_IS(DWC32) && speed < USB_SPEED_SUPER_PLUS)
+ if (DWC3_IP_IS(DWC32) && selected_speed < USB_SPEED_SUPER_PLUS)
reg &= ~DWC3_DCFG_NUMLANES(~0);
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
--
2.11.0
^ permalink raw reply related [flat|nested] 16+ messages in thread* Re: [PATCH v4 00/12] usb: Handle different sublink speeds
2020-07-26 1:35 [PATCH v4 00/12] usb: Handle different sublink speeds Thinh Nguyen
` (11 preceding siblings ...)
2020-07-26 1:37 ` [PATCH v4 12/12] usb: dwc3: gadget: Set speed only up to the max supported Thinh Nguyen
@ 2020-09-05 0:53 ` Thinh Nguyen
12 siblings, 0 replies; 16+ messages in thread
From: Thinh Nguyen @ 2020-09-05 0:53 UTC (permalink / raw)
To: Felipe Balbi, Greg Kroah-Hartman, linux-usb, devicetree,
Rob Herring, Peter Chen, Lee Jones, Alan Stern, Dejin Zheng,
Roger Quadros
Cc: John Youn
Hi all,
Thinh Nguyen wrote:
> A USB super-speed-plus device may operate at different sublink speed and lane
> count (e.g. gen2x2, gen1x2, or gen2x1). The usb gadget stack needs to be able
> to handle a couple things:
>
> 1) Report the sublink speed attributes the device support
> 2) Select the sublink speed attribute
>
> This series introduces sublink speed attribute structure to ch9.h to capture
> the device capability of the gadget. It also introduces a new gadget ops
> udc_set_num_lanes_and_speed to select a specific sublink speed.
>
> DWC3 needs this support for DWC_usb32 IP. Implement the new changes for DWC3.
>
> Changes in v4:
> - Instead of using a single function to parse "maximum-speed" property for
> speed, gen X, and number of lanes, split those tasks to separate common
> functions
> - Revise DWC3 driver to use those new common functions
> - Fix checkpatch warnings for using "unsigned" rather than "unsigned int" and
> missing identifier name in udc_set_num_lanes_and_speed gadget ops
>
> Changes in v3:
> - Remove "num-lanes" and "lane-speed-mantissa-gbps" common properties
> - Remove "num-lanes" and "lane-speed-mantissa-gbps" properties validation in dwc3
> - Update "maximum-speed" to support variations of SSP Gen X x Y
> - Update common function to parse new strings for "maximum-speed"
> - Update commit messages for the new changes
>
> Changes in v2:
> - Move usb_sublink_speed attribute struct and enum to include/linux/usb/ch9.h
> - Use "num-lanes" and "lane-speed-mantissa-gbps" as common properties instead
> - Add common functions to get num-lanes and lsm properties
> - Fix missing gen1x2 sublink speed attribute check report in dwc3
>
>
> Thinh Nguyen (12):
> usb: ch9: Add sublink speed struct
> usb: gadget: composite: Avoid using magic numbers
> usb: gadget: Expose sublink speed attributes
> usb: gadget: Set max speed for SSP devices
> usb: composite: Properly report sublink speed
> usb: devicetree: Include USB SSP Gen X x Y
> usb: common: Add and update common functions for SSP speeds
> usb: dwc3: Initialize lane count and sublink speed
> usb: dwc3: gadget: Report sublink speed capability
> usb: dwc3: gadget: Implement setting of sublink speed
> usb: dwc3: gadget: Track connected lane and sublink speed
> usb: dwc3: gadget: Set speed only up to the max supported
>
> Documentation/devicetree/bindings/usb/generic.txt | 11 +-
> drivers/usb/common/common.c | 46 ++++++-
> drivers/usb/dwc3/core.c | 29 +++++
> drivers/usb/dwc3/core.h | 14 +++
> drivers/usb/dwc3/gadget.c | 143 +++++++++++++++++++++-
> drivers/usb/gadget/composite.c | 81 ++++++++----
> drivers/usb/gadget/udc/core.c | 24 +++-
> include/linux/usb/ch9.h | 73 +++++++++++
> include/linux/usb/gadget.h | 23 ++++
> 9 files changed, 403 insertions(+), 41 deletions(-)
>
>
> base-commit: a1ff2f6769e39055e973b068070aeea0b3bcd90f
Gentle ping...
Let me know if you have any concern for any of the patch in this series.
Thanks,
Thinh
^ permalink raw reply [flat|nested] 16+ messages in thread