linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Anson Huang <Anson.Huang@nxp.com>
To: wim@linux-watchdog.org, linux@roeck-us.net, robh+dt@kernel.org,
	mark.rutland@arm.com, shawnguo@kernel.org,
	s.hauer@pengutronix.de, kernel@pengutronix.de,
	festevam@gmail.com, linux@armlinux.org.uk,
	otavio@ossystems.com.br, leonard.crestez@nxp.com,
	u.kleine-koenig@pengutronix.de, schnitzeltony@gmail.com,
	jan.tuerk@emtrion.com, linux-watchdog@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org
Cc: Linux-imx@nxp.com
Subject: [PATCH V5 2/4] watchdog: Add i.MX7ULP watchdog support
Date: Wed, 28 Aug 2019 09:35:01 -0400	[thread overview]
Message-ID: <1566999303-18795-2-git-send-email-Anson.Huang@nxp.com> (raw)
In-Reply-To: <1566999303-18795-1-git-send-email-Anson.Huang@nxp.com>

The i.MX7ULP Watchdog Timer (WDOG) module is an independent timer
that is available for system use.
It provides a safety feature to ensure that software is executing
as planned and that the CPU is not stuck in an infinite loop or
executing unintended code. If the WDOG module is not serviced
(refreshed) within a certain period, it resets the MCU.

Add driver support for i.MX7ULP watchdog.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No changes.
---
 drivers/watchdog/Kconfig       |  13 +++
 drivers/watchdog/Makefile      |   1 +
 drivers/watchdog/imx7ulp_wdt.c | 243 +++++++++++++++++++++++++++++++++++++++++
 3 files changed, 257 insertions(+)
 create mode 100644 drivers/watchdog/imx7ulp_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index a8f5c81..d68e5b5 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -724,6 +724,19 @@ config IMX_SC_WDT
 	  To compile this driver as a module, choose M here: the
 	  module will be called imx_sc_wdt.
 
+config IMX7ULP_WDT
+	tristate "IMX7ULP Watchdog"
+	depends on ARCH_MXC || COMPILE_TEST
+	select WATCHDOG_CORE
+	help
+	  This is the driver for the hardware watchdog on the Freescale
+	  IMX7ULP and later processors. If you have one of these
+	  processors and wish to have watchdog support enabled,
+	  say Y, otherwise say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx7ulp_wdt.
+
 config UX500_WATCHDOG
 	tristate "ST-Ericsson Ux500 watchdog"
 	depends on MFD_DB8500_PRCMU
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index b5a0aed..2ee352b 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -67,6 +67,7 @@ obj-$(CONFIG_TS4800_WATCHDOG) += ts4800_wdt.o
 obj-$(CONFIG_TS72XX_WATCHDOG) += ts72xx_wdt.o
 obj-$(CONFIG_IMX2_WDT) += imx2_wdt.o
 obj-$(CONFIG_IMX_SC_WDT) += imx_sc_wdt.o
+obj-$(CONFIG_IMX7ULP_WDT) += imx7ulp_wdt.o
 obj-$(CONFIG_UX500_WATCHDOG) += ux500_wdt.o
 obj-$(CONFIG_RETU_WATCHDOG) += retu_wdt.o
 obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c
new file mode 100644
index 0000000..5ce5102
--- /dev/null
+++ b/drivers/watchdog/imx7ulp_wdt.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright 2019 NXP.
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/watchdog.h>
+
+#define WDOG_CS			0x0
+#define WDOG_CS_CMD32EN		BIT(13)
+#define WDOG_CS_ULK		BIT(11)
+#define WDOG_CS_RCS		BIT(10)
+#define WDOG_CS_EN		BIT(7)
+#define WDOG_CS_UPDATE		BIT(5)
+
+#define WDOG_CNT	0x4
+#define WDOG_TOVAL	0x8
+
+#define REFRESH_SEQ0	0xA602
+#define REFRESH_SEQ1	0xB480
+#define REFRESH		((REFRESH_SEQ1 << 16) | REFRESH_SEQ0)
+
+#define UNLOCK_SEQ0	0xC520
+#define UNLOCK_SEQ1	0xD928
+#define UNLOCK		((UNLOCK_SEQ1 << 16) | UNLOCK_SEQ0)
+
+#define DEFAULT_TIMEOUT	60
+#define MAX_TIMEOUT	128
+#define WDOG_CLOCK_RATE	1000
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0000);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct imx7ulp_wdt_device {
+	struct notifier_block restart_handler;
+	struct watchdog_device wdd;
+	void __iomem *base;
+	struct clk *clk;
+};
+
+static inline void imx7ulp_wdt_enable(void __iomem *base, bool enable)
+{
+	u32 val = readl(base + WDOG_CS);
+
+	writel(UNLOCK, base + WDOG_CNT);
+	if (enable)
+		writel(val | WDOG_CS_EN, base + WDOG_CS);
+	else
+		writel(val & ~WDOG_CS_EN, base + WDOG_CS);
+}
+
+static inline bool imx7ulp_wdt_is_enabled(void __iomem *base)
+{
+	u32 val = readl(base + WDOG_CS);
+
+	return val & WDOG_CS_EN;
+}
+
+static int imx7ulp_wdt_ping(struct watchdog_device *wdog)
+{
+	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
+
+	writel(REFRESH, wdt->base + WDOG_CNT);
+
+	return 0;
+}
+
+static int imx7ulp_wdt_start(struct watchdog_device *wdog)
+{
+	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
+
+	imx7ulp_wdt_enable(wdt->base, true);
+
+	return 0;
+}
+
+static int imx7ulp_wdt_stop(struct watchdog_device *wdog)
+{
+	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
+
+	imx7ulp_wdt_enable(wdt->base, false);
+
+	return 0;
+}
+
+static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog,
+				   unsigned int timeout)
+{
+	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
+	u32 val = WDOG_CLOCK_RATE * timeout;
+
+	writel(UNLOCK, wdt->base + WDOG_CNT);
+	writel(val, wdt->base + WDOG_TOVAL);
+
+	wdog->timeout = timeout;
+
+	return 0;
+}
+
+static const struct watchdog_ops imx7ulp_wdt_ops = {
+	.owner = THIS_MODULE,
+	.start = imx7ulp_wdt_start,
+	.stop  = imx7ulp_wdt_stop,
+	.ping  = imx7ulp_wdt_ping,
+	.set_timeout = imx7ulp_wdt_set_timeout,
+};
+
+static const struct watchdog_info imx7ulp_wdt_info = {
+	.identity = "i.MX7ULP watchdog timer",
+	.options  = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+		    WDIOF_MAGICCLOSE,
+};
+
+static inline void imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
+{
+	u32 val;
+
+	/* unlock the wdog for reconfiguration */
+	writel_relaxed(UNLOCK_SEQ0, base + WDOG_CNT);
+	writel_relaxed(UNLOCK_SEQ1, base + WDOG_CNT);
+
+	/* set an initial timeout value in TOVAL */
+	writel(timeout, base + WDOG_TOVAL);
+	/* enable 32bit command sequence and reconfigure */
+	val = BIT(13) | BIT(8) | BIT(5);
+	writel(val, base + WDOG_CS);
+}
+
+static void imx7ulp_wdt_action(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
+static int imx7ulp_wdt_probe(struct platform_device *pdev)
+{
+	struct imx7ulp_wdt_device *imx7ulp_wdt;
+	struct device *dev = &pdev->dev;
+	struct watchdog_device *wdog;
+	int ret;
+
+	imx7ulp_wdt = devm_kzalloc(dev, sizeof(*imx7ulp_wdt), GFP_KERNEL);
+	if (!imx7ulp_wdt)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, imx7ulp_wdt);
+
+	imx7ulp_wdt->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(imx7ulp_wdt->base))
+		return PTR_ERR(imx7ulp_wdt->base);
+
+	imx7ulp_wdt->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(imx7ulp_wdt->clk)) {
+		dev_err(dev, "Failed to get watchdog clock\n");
+		return PTR_ERR(imx7ulp_wdt->clk);
+	}
+
+	ret = clk_prepare_enable(imx7ulp_wdt->clk);
+	if (ret)
+		return ret;
+
+	ret = devm_add_action_or_reset(dev, imx7ulp_wdt_action, imx7ulp_wdt->clk);
+	if (ret)
+		return ret;
+
+	wdog = &imx7ulp_wdt->wdd;
+	wdog->info = &imx7ulp_wdt_info;
+	wdog->ops = &imx7ulp_wdt_ops;
+	wdog->min_timeout = 1;
+	wdog->max_timeout = MAX_TIMEOUT;
+	wdog->parent = dev;
+	wdog->timeout = DEFAULT_TIMEOUT;
+
+	watchdog_init_timeout(wdog, 0, dev);
+	watchdog_stop_on_reboot(wdog);
+	watchdog_stop_on_unregister(wdog);
+	watchdog_set_drvdata(wdog, imx7ulp_wdt);
+	imx7ulp_wdt_init(imx7ulp_wdt->base, wdog->timeout * WDOG_CLOCK_RATE);
+
+	return devm_watchdog_register_device(dev, wdog);
+}
+
+static int __maybe_unused imx7ulp_wdt_suspend(struct device *dev)
+{
+	struct imx7ulp_wdt_device *imx7ulp_wdt = dev_get_drvdata(dev);
+
+	if (watchdog_active(&imx7ulp_wdt->wdd))
+		imx7ulp_wdt_stop(&imx7ulp_wdt->wdd);
+
+	clk_disable_unprepare(imx7ulp_wdt->clk);
+
+	return 0;
+}
+
+static int __maybe_unused imx7ulp_wdt_resume(struct device *dev)
+{
+	struct imx7ulp_wdt_device *imx7ulp_wdt = dev_get_drvdata(dev);
+	u32 timeout = imx7ulp_wdt->wdd.timeout * WDOG_CLOCK_RATE;
+	int ret;
+
+	ret = clk_prepare_enable(imx7ulp_wdt->clk);
+	if (ret)
+		return ret;
+
+	if (imx7ulp_wdt_is_enabled(imx7ulp_wdt->base))
+		imx7ulp_wdt_init(imx7ulp_wdt->base, timeout);
+
+	if (watchdog_active(&imx7ulp_wdt->wdd))
+		imx7ulp_wdt_start(&imx7ulp_wdt->wdd);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(imx7ulp_wdt_pm_ops, imx7ulp_wdt_suspend,
+			 imx7ulp_wdt_resume);
+
+static const struct of_device_id imx7ulp_wdt_dt_ids[] = {
+	{ .compatible = "fsl,imx7ulp-wdt", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx7ulp_wdt_dt_ids);
+
+static struct platform_driver imx7ulp_wdt_driver = {
+	.probe		= imx7ulp_wdt_probe,
+	.driver		= {
+		.name	= "imx7ulp-wdt",
+		.pm	= &imx7ulp_wdt_pm_ops,
+		.of_match_table = imx7ulp_wdt_dt_ids,
+	},
+};
+module_platform_driver(imx7ulp_wdt_driver);
+
+MODULE_AUTHOR("Anson Huang <Anson.Huang@nxp.com>");
+MODULE_DESCRIPTION("Freescale i.MX7ULP watchdog driver");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4


  reply	other threads:[~2019-08-28  1:36 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-28 13:35 [PATCH V5 1/4] dt-bindings: watchdog: Add i.MX7ULP bindings Anson Huang
2019-08-28 13:35 ` Anson Huang [this message]
2019-08-30 16:51   ` [PATCH V5 2/4] watchdog: Add i.MX7ULP watchdog support Guenter Roeck
2019-08-28 13:35 ` [PATCH V5 3/4] ARM: imx_v6_v7_defconfig: Enable CONFIG_IMX7ULP_WDT by default Anson Huang
2019-10-03  9:12   ` Shawn Guo
2019-08-28 13:35 ` [PATCH V5 4/4] ARM: dts: imx7ulp: Add wdog1 node Anson Huang
2019-10-03  9:13   ` Shawn Guo
2019-08-30 16:51 ` [PATCH V5 1/4] dt-bindings: watchdog: Add i.MX7ULP bindings Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1566999303-18795-2-git-send-email-Anson.Huang@nxp.com \
    --to=anson.huang@nxp.com \
    --cc=Linux-imx@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=jan.tuerk@emtrion.com \
    --cc=kernel@pengutronix.de \
    --cc=leonard.crestez@nxp.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=otavio@ossystems.com.br \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=schnitzeltony@gmail.com \
    --cc=shawnguo@kernel.org \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).