[GIT PULL REQUEST] watchdog - v5.4 Merge window

[GIT PULL REQUEST] watchdog - v5.4 Merge window

[Wim Van Sebroeck]

Hi Linus,

My apologies for the delay.

Please pull the watchdog changes for the v5.4 release cycle.

This series contains:
* addition of AST2600, i.MX7ULP and F81803 watchdog support
* removal of the w90x900 and ks8695 drivers
* ziirave_wdt improvements
* small fixes and improvements

The output from git request-pull:
----------------------------------------------------------------
The following changes since commit ad5e427e0f6b702e52c11d1f7b2b7be3bac7de82:

  Merge branch 'parisc-5.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux (2019-07-23 15:34:59 -0700)

are available in the git repository at:

  git://www.linux-watchdog.org/linux-watchdog.git tags/linux-watchdog-5.4-rc1

for you to fetch changes up to ca2fc5efffde5a3827adfb0ab6a51b6f1c64d5ff:

  watchdog: f71808e_wdt: Add F81803 support (2019-09-17 08:59:14 +0200)

----------------------------------------------------------------
linux-watchdog 5.4-rc1 tag

----------------------------------------------------------------
Andrey Smirnov (22):
      watchdog: ziirave_wdt: Add missing newline
      watchdog: ziirave_wdt: Be verbose about errors in probe()
      watchdog: ziirave_wdt: Be more verbose during firmware update
      watchdog: ziirave_wdt: Don't bail out on unexpected timeout value
      watchdog: ziirave_wdt: Log bootloader/firmware info during probe
      watchdog: ziirave_wdt: Simplify ziirave_firm_write_pkt()
      watchdog: ziirave_wdt: Check packet length only once
      watchdog: ziirave_wdt: Skip zeros when calculating checksum
      watchdog: ziirave_wdt: Fix incorrect use of ARRAY_SIZE
      watchdog: ziirave_wdt: Zero out only what's necessary
      watchdog: ziirave_wdt: Make use of put_unaligned_le16
      watchdog: ziirave_wdt: Don't check if ihex record length is zero
      watchdog: ziirave_wdt: Don't read out more than 'len' firmware bytes
      watchdog: ziirave_wdt: Don't try to program readonly flash
      watchdog: ziirave_wdt: Fix misleading error message
      watchdog: ziirave_wdt: Fix JUMP_TO_BOOTLOADER payload
      watchdog: ziirave_wdt: Fix DOWNLOAD_END payload
      watchdog: ziirave_wdt: Fix RESET_PROCESSOR payload
      watchdog: ziirave_wdt: Drop status polling code
      watchdog: ziirave_wdt: Fix DOWNLOAD_START payload
      watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data()
      watchdog: ziirave_wdt: Update checked I2C functionality mask

Anson Huang (3):
      watchdog: imx_sc: Remove unnecessary error log
      dt-bindings: watchdog: Add i.MX7ULP bindings
      watchdog: Add i.MX7ULP watchdog support

Arnd Bergmann (4):
      watchdog: pnx4008_wdt: allow compile-testing
      watchdog: remove ks8695 driver
      watchdog: remove w90x900 driver
      watchdog: cpwd: use generic compat_ptr_ioctl

Chris Packham (1):
      watchdog: orion_wdt: use timer1 as a pretimeout

Christophe JAILLET (1):
      watchdog: ath79_wdt: fix a typo in the name of a function

Guenter Roeck (1):
      watchdog: diag288_wdt: Remove leftover includes from conversion to watchdog API

Gustavo A. R. Silva (5):
      watchdog: Mark expected switch fall-throughs
      watchdog: scx200_wdt: Mark expected switch fall-through
      watchdog: wdt977: Mark expected switch fall-through
      watchdog: riowd: Mark expected switch fall-through
      watchdog: jz4740: Fix unused variable warning in jz4740_wdt_probe

Ivan Mikhaylov (2):
      watchdog: aspeed: add support for dual boot
      watchdog: apseed: Add access_cs0 option for alt-boot

Jaret Cantu (1):
      watchdog: f71808e_wdt: Add F81803 support

Joel Stanley (1):
      dt-bindings: watchdog: Add ast2600 compatible

Jorge Ramirez-Ortiz (2):
      watchdog: qcom: support pre-timeout when the bark irq is available
      watchdog: qcom: remove unnecessary variable from private storage

Maxime Ripard (4):
      dt-bindings: watchdog: Add YAML schemas for the generic watchdog bindings
      dt-bindings: watchdog: Convert Allwinner watchdog to a schema
      dt-bindings: watchdog: sun4i: Add the watchdog interrupts
      dt-bindings: watchdog: sun4i: Add the watchdog clock

Oliver Graute (1):
      watchdog: imx_sc: this patch just fixes whitespaces

Rasmus Villemoes (1):
      watchdog: imx2_wdt: fix min() calculation in imx2_wdt_set_timeout

Ryan Chen (1):
      watchdog: aspeed: Add support for AST2600

Stephen Boyd (1):
      watchdog: Remove dev_err() usage after platform_get_irq()

 Documentation/ABI/testing/sysfs-class-watchdog     |  34 ++
 .../bindings/watchdog/allwinner,sun4i-a10-wdt.yaml |  58 ++++
 .../devicetree/bindings/watchdog/aspeed-wdt.txt    |   1 +
 .../bindings/watchdog/fsl-imx7ulp-wdt.txt          |  22 ++
 .../devicetree/bindings/watchdog/sunxi-wdt.txt     |  22 --
 .../devicetree/bindings/watchdog/watchdog.yaml     |  26 ++
 Documentation/watchdog/watchdog-parameters.rst     |  19 --
 drivers/watchdog/Kconfig                           |  35 +-
 drivers/watchdog/Makefile                          |   3 +-
 drivers/watchdog/ar7_wdt.c                         |   1 +
 drivers/watchdog/aspeed_wdt.c                      |  69 +++-
 drivers/watchdog/ath79_wdt.c                       |   4 +-
 drivers/watchdog/cpwd.c                            |  25 +-
 drivers/watchdog/diag288_wdt.c                     |   3 -
 drivers/watchdog/f71808e_wdt.c                     |  17 +-
 drivers/watchdog/imx2_wdt.c                        |   4 +-
 drivers/watchdog/imx7ulp_wdt.c                     | 243 ++++++++++++++
 drivers/watchdog/imx_sc_wdt.c                      |   9 +-
 drivers/watchdog/jz4740_wdt.c                      |   1 -
 drivers/watchdog/ks8695_wdt.c                      | 319 -------------------
 drivers/watchdog/nuc900_wdt.c                      | 302 ------------------
 drivers/watchdog/orion_wdt.c                       |  66 +++-
 drivers/watchdog/pcwd.c                            |   2 +-
 drivers/watchdog/pnx4008_wdt.c                     |   1 -
 drivers/watchdog/qcom-wdt.c                        |  84 ++++-
 drivers/watchdog/riowd.c                           |   2 +-
 drivers/watchdog/sb_wdog.c                         |   1 +
 drivers/watchdog/scx200_wdt.c                      |   1 +
 drivers/watchdog/sprd_wdt.c                        |   4 +-
 drivers/watchdog/wdt.c                             |   2 +-
 drivers/watchdog/wdt977.c                          |   2 +-
 drivers/watchdog/ziirave_wdt.c                     | 351 ++++++++++-----------
 32 files changed, 797 insertions(+), 936 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
 create mode 100644 Documentation/devicetree/bindings/watchdog/fsl-imx7ulp-wdt.txt
 delete mode 100644 Documentation/devicetree/bindings/watchdog/sunxi-wdt.txt
 create mode 100644 Documentation/devicetree/bindings/watchdog/watchdog.yaml
 create mode 100644 drivers/watchdog/imx7ulp_wdt.c
 delete mode 100644 drivers/watchdog/ks8695_wdt.c
 delete mode 100644 drivers/watchdog/nuc900_wdt.c
----------------------------------------------------------------

Kind regards,
Wim.

Re: [GIT PULL REQUEST] watchdog - v5.4 Merge window

[pr-tracker-bot]

The pull request you sent on Fri, 27 Sep 2019 09:15:27 +0200:

> git://www.linux-watchdog.org/linux-watchdog.git tags/linux-watchdog-5.4-rc1

has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/7bccb9f10c8f36ee791769b531ed4d28f6379aae

Thank you!

-- 
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/prtracker