From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Return-path: From: Jeremy Gebben To: Alessandro Zummo , Alexandre Belloni , Wim Van Sebroeck , Guenter Roeck , linux-rtc@vger.kernel.org Cc: linux-watchdog@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH 2/2] rtc: abx80x: add basic watchdog support Date: Mon, 10 Sep 2018 15:36:54 -0600 Message-Id: <20180910213654.26059-3-jgebben@sweptlaser.com> In-Reply-To: <20180910213654.26059-1-jgebben@sweptlaser.com> References: <20180910213654.26059-1-jgebben@sweptlaser.com> List-ID: The abx804 and abx805 chips have support for a simple watchdog function that can trigger an external reset. Signed-off-by: Jeremy Gebben --- drivers/rtc/rtc-abx80x.c | 132 +++++++++++++++++++++++++++++++++++++-- 1 file changed, 128 insertions(+), 4 deletions(-) diff --git a/drivers/rtc/rtc-abx80x.c b/drivers/rtc/rtc-abx80x.c index 9d49054a0a4a..e1ec4cce093a 100644 --- a/drivers/rtc/rtc-abx80x.c +++ b/drivers/rtc/rtc-abx80x.c @@ -17,6 +17,7 @@ #include #include #include +#include #define ABX8XX_REG_HTH 0x00 #define ABX8XX_REG_SC 0x01 @@ -37,6 +38,7 @@ #define ABX8XX_REG_STATUS 0x0f #define ABX8XX_STATUS_AF BIT(2) +#define ABX8XX_STATUS_WDT BIT(6) #define ABX8XX_REG_CTRL1 0x10 #define ABX8XX_CTRL_WRITE BIT(0) @@ -61,6 +63,14 @@ #define ABX8XX_OSS_OF BIT(1) #define ABX8XX_OSS_OMODE BIT(4) +#define ABX8XX_REG_WDT 0x1b +#define ABX8XX_WDT_WDS BIT(7) +#define ABX8XX_WDT_BMB_MASK 0x7c +#define ABX8XX_WDT_BMB_SHIFT 2 +#define ABX8XX_WDT_MAX_TIME (ABX8XX_WDT_BMB_MASK >> ABX8XX_WDT_BMB_SHIFT) +#define ABX8XX_WDT_WRB_MASK 0x03 +#define ABX8XX_WDT_WRB_1HZ 0x02 + #define ABX8XX_REG_CFG_KEY 0x1f #define ABX8XX_CFG_KEY_OSC 0xa1 #define ABX8XX_CFG_KEY_MISC 0x9d @@ -80,23 +90,25 @@ enum abx80x_chip {AB0801, AB0803, AB0804, AB0805, struct abx80x_cap { u16 pn; bool has_tc; + bool has_wdog; }; static struct abx80x_cap abx80x_caps[] = { [AB0801] = {.pn = 0x0801}, [AB0803] = {.pn = 0x0803}, - [AB0804] = {.pn = 0x0804, .has_tc = true}, - [AB0805] = {.pn = 0x0805, .has_tc = true}, + [AB0804] = {.pn = 0x0804, .has_tc = true, .has_wdog = true}, + [AB0805] = {.pn = 0x0805, .has_tc = true, .has_wdog = true}, [AB1801] = {.pn = 0x1801}, [AB1803] = {.pn = 0x1803}, - [AB1804] = {.pn = 0x1804, .has_tc = true}, - [AB1805] = {.pn = 0x1805, .has_tc = true}, + [AB1804] = {.pn = 0x1804, .has_tc = true, .has_wdog = true}, + [AB1805] = {.pn = 0x1805, .has_tc = true, .has_wdog = true}, [ABX80X] = {.pn = 0} }; struct abx80x_priv { struct rtc_device *rtc; struct i2c_client *client; + struct watchdog_device wdog; }; static int abx80x_is_rc_mode(struct i2c_client *client) @@ -234,6 +246,13 @@ static irqreturn_t abx80x_handle_irq(int irq, void *dev_id) if (status & ABX8XX_STATUS_AF) rtc_update_irq(rtc, 1, RTC_AF | RTC_IRQF); + /* + * It is unclear if we'll get an interrupt before the external + * reset kicks in. + */ + if (status & ABX8XX_STATUS_WDT) + dev_alert(&client->dev, "watchdog timeout interrupt.\n"); + i2c_smbus_write_byte_data(client, ABX8XX_REG_STATUS, 0); return IRQ_HANDLED; @@ -535,6 +554,105 @@ static void rtc_calib_remove_sysfs_group(void *_dev) sysfs_remove_group(&dev->kobj, &rtc_calib_attr_group); } +#ifdef CONFIG_WATCHDOG + +static inline u8 timeout_bits(unsigned int timeout) +{ + return ((timeout << ABX8XX_WDT_BMB_SHIFT) & ABX8XX_WDT_BMB_MASK) | + ABX8XX_WDT_WRB_1HZ; +} + +static int __abx80x_wdog_set_timeout(struct watchdog_device *wdog, + unsigned int timeout) +{ + struct abx80x_priv *priv = watchdog_get_drvdata(wdog); + u8 val = ABX8XX_WDT_WDS | timeout_bits(timeout); + + /* + * Writing any timeout to the WDT register resets the watchdog timer. + * Writing 0 disables it. + */ + return i2c_smbus_write_byte_data(priv->client, ABX8XX_REG_WDT, val); +} + +static int abx80x_wdog_set_timeout(struct watchdog_device *wdog, + unsigned int new_timeout) +{ + int err = __abx80x_wdog_set_timeout(wdog, new_timeout); + + if (err) + return err; + + wdog->timeout = new_timeout; + return 0; +} + +static int abx80x_wdog_ping(struct watchdog_device *wdog) +{ + return __abx80x_wdog_set_timeout(wdog, wdog->timeout); +} + +static int abx80x_wdog_start(struct watchdog_device *wdog) +{ + int err = __abx80x_wdog_set_timeout(wdog, wdog->timeout); + + if (err) + return err; + + set_bit(WDOG_HW_RUNNING, &wdog->status); + return 0; +} + +static int abx80x_wdog_stop(struct watchdog_device *wdog) +{ + int err = __abx80x_wdog_set_timeout(wdog, 0); + + if (err) + return err; + + clear_bit(WDOG_HW_RUNNING, &wdog->status); + return 0; +} + +static const struct watchdog_info abx80x_wdog_info = { + .identity = "abx80x watchdog", + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, +}; + +static const struct watchdog_ops abx80x_wdog_ops = { + .owner = THIS_MODULE, + .start = abx80x_wdog_start, + .stop = abx80x_wdog_stop, + .ping = abx80x_wdog_ping, + .set_timeout = abx80x_wdog_set_timeout, +}; + +static int abx80x_setup_watchdog(struct abx80x_priv *priv) +{ + int err; + + priv->wdog.ops = &abx80x_wdog_ops; + priv->wdog.info = &abx80x_wdog_info; + priv->wdog.min_timeout = 1; + priv->wdog.max_timeout = ABX8XX_WDT_MAX_TIME; + + err = devm_watchdog_register_device(&priv->client->dev, + &priv->wdog); + if (err) + return err; + + watchdog_set_drvdata(&priv->wdog, priv); + watchdog_init_timeout(&priv->wdog, ABX8XX_WDT_MAX_TIME, + &priv->client->dev); + return 0; +} +#else +static int abx80x_setup_watchdog(struct abx80x_priv *priv) +{ + return 0; +} +#endif + static int abx80x_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -629,6 +747,12 @@ static int abx80x_probe(struct i2c_client *client, i2c_set_clientdata(client, priv); + if (abx80x_caps[part].has_wdog) { + err = abx80x_setup_watchdog(priv); + if (err) + return err; + } + if (client->irq > 0) { dev_info(&client->dev, "IRQ %d supplied\n", client->irq); err = devm_request_threaded_irq(&client->dev, client->irq, NULL, -- 2.17.1