From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from mail-ot1-f68.google.com ([209.85.210.68]:33293 "EHLO mail-ot1-f68.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728958AbeJLXBu (ORCPT ); Fri, 12 Oct 2018 19:01:50 -0400 Date: Fri, 12 Oct 2018 10:28:48 -0500 From: Rob Herring To: Pascal PAILLET-LME Cc: "dmitry.torokhov@gmail.com" , "mark.rutland@arm.com" , "lee.jones@linaro.org" , "lgirdwood@gmail.com" , "broonie@kernel.org" , "wim@linux-watchdog.org" , "linux@roeck-us.net" , "linux-input@vger.kernel.org" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" , "linux-watchdog@vger.kernel.org" , "benjamin.gaignard@linaro.org" , "eballetbo@gmail.com" Subject: Re: [PATCH v3 1/8] dt-bindings: mfd: document stpmic1 Message-ID: <20181012152848.GA13024@bogus> References: <1539016176-4072-1-git-send-email-p.paillet@st.com> <1539016176-4072-2-git-send-email-p.paillet@st.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1539016176-4072-2-git-send-email-p.paillet@st.com> Sender: linux-watchdog-owner@vger.kernel.org List-Id: linux-watchdog@vger.kernel.org On Mon, Oct 08, 2018 at 04:29:39PM +0000, Pascal PAILLET-LME wrote: > From: pascal paillet > > stpmic1 is a pmic from STMicroelectronics. The STPMIC1 integrates 10 > regulators ,3 switches, a watchdog and an input for a power on key. regulators, 3 switches, ... > > Signed-off-by: pascal paillet > --- > changes in v3: > * Replace st,onkey-long-press-seconds by power-off-time-sec. > * Replace interrupts-extended by interrupts. > * Remove wakeup interrupt. > * Cosmetics. > > .../devicetree/bindings/mfd/st,stpmic1.txt | 133 +++++++++++++++++++++ > include/dt-bindings/mfd/st,stpmic1.h | 46 +++++++ > 2 files changed, 179 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mfd/st,stpmic1.txt > create mode 100644 include/dt-bindings/mfd/st,stpmic1.h A few nits, otherwise: Reviewed-by: Rob Herring > > diff --git a/Documentation/devicetree/bindings/mfd/st,stpmic1.txt b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt > new file mode 100644 > index 0000000..989bd58 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mfd/st,stpmic1.txt > @@ -0,0 +1,133 @@ > +* STMicroelectronics STPMIC1 Power Management IC > + > +Required parent device properties: > +- compatible: "st,stpmic1" > +- reg: The I2C slave address for the STPMIC1 chip. space before tabs > +- interrupt-parent Phandle to the parent interrupt controller. Drop this. It could be in the parent. > +- interrupts: The interrupt line the device is connected to. > +- #interrupt-cells: Should be 1. more space before tabs. > +- interrupt-controller: Describes the STPMIC1 as an interrupt > + controller (has its own domain). Interrupt number are the following: > + /* Interrupt Register 1 (0x50 for latch) */ > + IT_SWOUT_R=0 > + IT_SWOUT_F=1 > + IT_VBUS_OTG_R=2 > + IT_VBUS_OTG_F=3 > + IT_WAKEUP_R=4 > + IT_WAKEUP_F=5 > + IT_PONKEY_R=6 > + IT_PONKEY_F=7 > + /* Interrupt Register 2 (0x51 for latch) */ > + IT_OVP_BOOST=8 > + IT_OCP_BOOST=9 > + IT_OCP_SWOUT=10 > + IT_OCP_OTG=11 > + IT_CURLIM_BUCK4=12 > + IT_CURLIM_BUCK3=13 > + IT_CURLIM_BUCK2=14 > + IT_CURLIM_BUCK1=15 > + /* Interrupt Register 3 (0x52 for latch) */ > + IT_SHORT_SWOUT=16 > + IT_SHORT_SWOTG=17 > + IT_CURLIM_LDO6=18 > + IT_CURLIM_LDO5=19 > + IT_CURLIM_LDO4=20 > + IT_CURLIM_LDO3=21 > + IT_CURLIM_LDO2=22 > + IT_CURLIM_LDO1=23 > + /* Interrupt Register 3 (0x52 for latch) */ > + IT_SWIN_R=24 > + IT_SWIN_F=25 > + IT_RESERVED_1=26 > + IT_RESERVED_2=27 > + IT_VINLOW_R=28 > + IT_VINLOW_F=29 > + IT_TWARN_R=30 > + IT_TWARN_F=31 > + > +Optional parent device properties: > +- st,main-control-register: > + -bit 1: Power cycling will be performed on turn OFF condition > + -bit 2: PWRCTRL is functional > + -bit 3: PWRCTRL active high > +- st,pads-pull-register: > + -bit 1: WAKEUP pull down is not active > + -bit 2: PWRCTRL pull up is active > + -bit 3: PWRCTRL pull down is active > + -bit 4: WAKEUP detector is disabled > +- st,vin-control-register: > + -bit 0: VINLOW monitoring is enabled > + -bit [1...3]: VINLOW rising threshold > + 000 VINOK_f + 50mV > + 001 VINOK_f + 100mV > + 010 VINOK_f + 150mV > + 011 VINOK_f + 200mV > + 100 VINOK_f + 250mV > + 101 VINOK_f + 300mV > + 110 VINOK_f + 350mV > + 111 VINOK_f + 400mV > + -bit [4...5]: VINLOW hyst > + 00 100mV > + 01 200mV > + 10 300mV > + 11 400mV > + -bit 6: SW_OUT detector is disabled > + -bit 7: SW_IN detector is enabled. > +- st,usb-control-register: > + -bit 3: SW_OUT current limit > + 0: 600mA > + 1: 1.1A > + -bit 4: VBUS_OTG discharge is enabled > + -bit 5: SW_OUT discharge is enabled > + -bit 6: VBUS_OTG detection is enabled > + -bit 7: BOOST_OVP is disabled > + > +STPMIC1 consists in a varied group of sub-devices. > +Each sub-device binding is be described in own documentation file. > + > +Device Description > +------ ------------ > +st,stpmic1-onkey : Power on key, see ../input/st,stpmic1-onkey.txt > +st,stpmic1-regulators : Regulators, see ../regulator/st,stpmic1-regulator.txt > +st,stpmic1-wdt : Watchdog, see ../watchdog/st,stpmic1-wdt.txt > + > +Example: > + > +pmic: pmic1@33 { pmic@33 > + compatible = "st,stpmic1"; > + reg = <0x33>; > + interrupt-parent = <&gpioa>; > + interrupts = <0 2>; > + st,main-control-register=<0x0c>; > + interrupt-controller; > + #interrupt-cells = <2>; > + > + onkey { > + compatible = "st,stpmic1-onkey"; > + interrupt-parent = <&pmic>; Not needed because the parent is the interrupt controller. > + interrupts = ,; > + interrupt-names = "onkey-falling", "onkey-rising"; > + power-off-time-sec = <10>; > + }; > + > + watchdog { > + compatible = "st,stpmic1-wdt"; > + }; > + > + regulators { > + compatible = "st,stpmic1-regulators"; > + > + vdd_core: buck1 { > + regulator-name = "vdd_core"; > + regulator-boot-on; > + regulator-min-microvolt = <700000>; > + regulator-max-microvolt = <1200000>; > + }; > + vdd: buck3 { > + regulator-name = "vdd"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-boot-on; > + regulator-pull-down; > + }; > + }; > diff --git a/include/dt-bindings/mfd/st,stpmic1.h b/include/dt-bindings/mfd/st,stpmic1.h > new file mode 100644 > index 0000000..b2d6c83 > --- /dev/null > +++ b/include/dt-bindings/mfd/st,stpmic1.h > @@ -0,0 +1,46 @@ > +/* SPDX-License-Identifier: GPL-2.0 */ > +/* > + * Copyright (C) STMicroelectronics 2018 - All Rights Reserved > + * Author: Philippe Peurichard , > + * Pascal Paillet for STMicroelectronics. > + */ > + > +#ifndef __DT_BINDINGS_STPMIC1_H__ > +#define __DT_BINDINGS_STPMIC1_H__ > + > +/* IRQ definitions */ > +#define IT_PONKEY_F 0 > +#define IT_PONKEY_R 1 > +#define IT_WAKEUP_F 2 > +#define IT_WAKEUP_R 3 > +#define IT_VBUS_OTG_F 4 > +#define IT_VBUS_OTG_R 5 > +#define IT_SWOUT_F 6 > +#define IT_SWOUT_R 7 > + > +#define IT_CURLIM_BUCK1 8 > +#define IT_CURLIM_BUCK2 9 > +#define IT_CURLIM_BUCK3 10 > +#define IT_CURLIM_BUCK4 11 > +#define IT_OCP_OTG 12 > +#define IT_OCP_SWOUT 13 > +#define IT_OCP_BOOST 14 > +#define IT_OVP_BOOST 15 > + > +#define IT_CURLIM_LDO1 16 > +#define IT_CURLIM_LDO2 17 > +#define IT_CURLIM_LDO3 18 > +#define IT_CURLIM_LDO4 19 > +#define IT_CURLIM_LDO5 20 > +#define IT_CURLIM_LDO6 21 > +#define IT_SHORT_SWOTG 22 > +#define IT_SHORT_SWOUT 23 > + > +#define IT_TWARN_F 24 > +#define IT_TWARN_R 25 > +#define IT_VINLOW_F 26 > +#define IT_VINLOW_R 27 > +#define IT_SWIN_F 30 > +#define IT_SWIN_R 31 > + > +#endif /* __DT_BINDINGS_STPMIC1_H__ */ > -- > 1.9.1