linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v4 0/5] BCM2835 PM driver
@ 2018-12-12 23:51 Eric Anholt
  2018-12-12 23:51 ` [PATCH v4 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4) Eric Anholt
                   ` (5 more replies)
  0 siblings, 6 replies; 8+ messages in thread
From: Eric Anholt @ 2018-12-12 23:51 UTC (permalink / raw)
  To: Florian Fainelli, linux-watchdog, devicetree, Guenter Roeck,
	Wim Van Sebroeck, Lee Jones, Stefan Wahren, Mark Rutland,
	Rob Herring
  Cc: linux-rpi-kernel, linux-arm-kernel, linux-kernel,
	bcm-kernel-feedback-list, Eric Anholt

v4 adds the system-power-controller node to the binding as requested
by Stefan.  No driver changes are added to make the power controller
behavior optional yet, since it's really unrelated to this series.

Eric Anholt (5):
  dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4)
  bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.
  soc: bcm: bcm2835-pm: Add support for power domains under a new
    binding.
  ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block.
    (v4)
  ARM: bcm283x: Switch V3D over to using the PM driver instead of
    firmware.

 .../bindings/soc/bcm/brcm,bcm2835-pm.txt      |  46 ++
 arch/arm/boot/dts/bcm2835-rpi.dtsi            |   4 -
 arch/arm/boot/dts/bcm283x.dtsi                |  17 +-
 arch/arm/mach-bcm/Kconfig                     |   1 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/bcm2835-pm.c                      |  92 +++
 drivers/soc/bcm/Kconfig                       |  11 +
 drivers/soc/bcm/Makefile                      |   1 +
 drivers/soc/bcm/bcm2835-power.c               | 661 ++++++++++++++++++
 drivers/watchdog/bcm2835_wdt.c                |  26 +-
 include/dt-bindings/soc/bcm2835-pm.h          |  28 +
 include/linux/mfd/bcm2835-pm.h                |  14 +
 12 files changed, 878 insertions(+), 24 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt
 create mode 100644 drivers/mfd/bcm2835-pm.c
 create mode 100644 drivers/soc/bcm/bcm2835-power.c
 create mode 100644 include/dt-bindings/soc/bcm2835-pm.h
 create mode 100644 include/linux/mfd/bcm2835-pm.h

-- 
2.20.0.rc1

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2019-01-09 19:00 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-12 23:51 [PATCH v4 0/5] BCM2835 PM driver Eric Anholt
2018-12-12 23:51 ` [PATCH v4 1/5] dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4) Eric Anholt
2018-12-12 23:51 ` [PATCH v4 2/5] bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD Eric Anholt
2018-12-12 23:51 ` [PATCH v4 3/5] soc: bcm: bcm2835-pm: Add support for power domains under a new binding Eric Anholt
2018-12-12 23:51 ` [PATCH v4 4/5] ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4) Eric Anholt
2018-12-12 23:51 ` [PATCH v4 5/5] ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware Eric Anholt
2019-01-03 15:56 ` [PATCH v4 0/5] BCM2835 PM driver Stefan Wahren
2019-01-09 19:00   ` Stefan Wahren

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).