Linux-Watchdog Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v9 00/27] Ingenic TCU patchset v9
@ 2018-12-27 18:12 Paul Cercueil
  2018-12-27 18:12 ` [PATCH v9 01/27] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
                   ` (26 more replies)
  0 siblings, 27 replies; 43+ messages in thread
From: Paul Cercueil @ 2018-12-27 18:12 UTC (permalink / raw)
  To: Thierry Reding, Rob Herring, Mark Rutland, Daniel Lezcano,
	Thomas Gleixner, Ralf Baechle, Paul Burton, James Hogan,
	Jonathan Corbet, Uwe Kleine-König
  Cc: linux-pwm, devicetree, linux-kernel, linux-watchdog, linux-mips,
	linux-doc, linux-clk

Hi,

This is the v9 of my patchset to add support for the Timer/Counter Unit
present on Ingenic JZ47xx SoCs.

Changes from v8 mainly include:

- The system timer and clocksource sub-nodes of the ingenic-timer driver
  are gone. Now, the ingenic-timer will use the (optional) property
  named "ingenic,pwm-channels-mask" to know which TCU channels are
  reserved for PWM use.

- New patch [11/27] makes the PWM driver implement the .apply callback,
  which is cleaner and incidentally fixes a long-standing bug.

- The patch in V8 that converted the PWM driver to use the regmap and
  clocks provided by the ingenic-timer driver has been splitted in three
  patches, [12,13,14/27]. The algorithm in [14/27] has been slightly
  improved.

- The patch that adds support for the JZ4725B SoC to the PWM driver has
  been removed from the patchset, as it's been suggested that the core
  could use a "npwms" device property to override the number of PWMs set
  in the driver.

Thanks,
-Paul Cercueil


^ permalink raw reply	[flat|nested] 43+ messages in thread

end of thread, back to index

Thread overview: 43+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-12-27 18:12 [PATCH v9 00/27] Ingenic TCU patchset v9 Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 01/27] dt-bindings: ingenic: Add DT bindings for TCU clocks Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 02/27] doc: Add doc for the Ingenic TCU hardware Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 03/27] dt-bindings: Add doc for the Ingenic TCU drivers Paul Cercueil
2018-12-28 21:48   ` Rob Herring
2018-12-27 18:12 ` [PATCH v9 04/27] clocksource: Add a new timer-ingenic driver Paul Cercueil
2019-02-25 15:55   ` Daniel Lezcano
2019-02-25 22:59     ` Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 05/27] clocksource: Add driver for the Ingenic JZ47xx OST Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 06/27] MAINTAINERS: Add myself as maintainer for Ingenic TCU drivers Paul Cercueil
2018-12-27 18:12 ` [PATCH v9 07/27] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 08/27] watchdog: jz4740: Use regmap " Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 09/27] watchdog: jz4740: Avoid starting watchdog in set_timeout Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 10/27] watchdog: jz4740: Drop dependency on MACH_JZ47xx, use COMPILE_TEST Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 11/27] pwm: jz4740: Apply configuration atomically Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 12/27] pwm: jz4740: Use regmap from TCU driver Paul Cercueil
2019-01-05 19:42   ` Uwe Kleine-König
2019-01-05 20:46     ` Paul Cercueil
2019-01-05 21:18       ` Uwe Kleine-König
2018-12-27 18:13 ` [PATCH v9 13/27] pwm: jz4740: Use clocks " Paul Cercueil
2019-01-05 19:45   ` Uwe Kleine-König
2019-01-05 20:52     ` Paul Cercueil
2019-01-05 21:19       ` Uwe Kleine-König
2018-12-27 18:13 ` [PATCH v9 14/27] pwm: jz4740: Improve algorithm of clock calculation Paul Cercueil
2019-01-05 19:57   ` Uwe Kleine-König
2019-01-05 21:05     ` Paul Cercueil
2019-01-05 21:27       ` Uwe Kleine-König
2019-01-10 14:04         ` Paul Cercueil
2019-02-23  1:17           ` Paul Cercueil
2019-02-28 18:42             ` Stephen Boyd
2018-12-27 18:13 ` [PATCH v9 15/27] pwm: jz4740: Allow selection of PWM channels 0 and 1 Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 16/27] pwm: jz4740: Drop dependency on MACH_INGENIC, use COMPILE_TEST Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 17/27] pwm: jz4740: Remove unused devicetree compatible strings Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 18/27] clk: jz4740: Add TCU clock Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 19/27] MIPS: Kconfig: Select TCU timer driver when MACH_INGENIC is set Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 20/27] MIPS: jz4740: Add DTS nodes for the TCU drivers Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 21/27] MIPS: qi_lb60: Move PWM devices to devicetree Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 22/27] MIPS: qi_lb60: Reduce system timer and clocksource to 750 kHz Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 23/27] MIPS: CI20: Reduce system timer to 3 MHz Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 24/27] MIPS: CI20: defconfig: enable OST driver Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 25/27] MIPS: GCW0: Reduce system timer to 750 kHz Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 26/27] MIPS: GCW0: defconfig: Enable OST, watchdog, PWM drivers Paul Cercueil
2018-12-27 18:13 ` [PATCH v9 27/27] MIPS: jz4740: Drop obsolete code Paul Cercueil

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org linux-watchdog@archiver.kernel.org
	public-inbox-index linux-watchdog

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/ public-inbox