Linux-Watchdog Archive on lore.kernel.org
 help / Atom feed
From: Rob Herring <robh@kernel.org>
To: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Cc: mazziesaccount@gmail.com, lee.jones@linaro.org,
	mark.rutland@arm.com, lgirdwood@gmail.com, broonie@kernel.org,
	gregkh@linuxfoundation.org, rafael@kernel.org,
	mturquette@baylibre.com, sboyd@kernel.org,
	linus.walleij@linaro.org, bgolaszewski@baylibre.com,
	sre@kernel.org, a.zummo@towertech.it,
	alexandre.belloni@bootlin.com, wim@linux-watchdog.org,
	linux@roeck-us.net, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-clk@vger.kernel.org,
	linux-gpio@vger.kernel.org, linux-pm@vger.kernel.org,
	linux-rtc@vger.kernel.org, linux-watchdog@vger.kernel.org,
	mikko.mutanen@fi.rohmeurope.com,
	heikki.haikola@fi.rohmeurope.com
Subject: Re: [RFC PATCH v1 07/13] devicetree: bindings: Document first ROHM BD70528 bindings
Date: Fri, 22 Feb 2019 18:30:41 -0600
Message-ID: <20190223003041.GA16670@bogus> (raw)
In-Reply-To: <80de7a2b537ae3f414b0281736652256f38cf94c.1548149337.git.matti.vaittinen@fi.rohmeurope.com>

On Tue, Jan 22, 2019 at 11:45:38AM +0200, Matti Vaittinen wrote:
> Document bindings for regulators (3 bucks, 3 LDOs and 2 LED
> drivers) and 4 GPIO pins which can be configured for I/O or
> as interrupt sources withe configurable trigger levels.

'dt-bindings: mfd: ...' for the subject.

> 
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> ---
>  .../devicetree/bindings/mfd/rohm,bd70528-pmic.txt  | 104 +++++++++++++++++++++
>  1 file changed, 104 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> 
> diff --git a/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> new file mode 100644
> index 000000000000..21801440a53a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/rohm,bd70528-pmic.txt
> @@ -0,0 +1,104 @@
> +* ROHM BD70528 Power Management Integrated Circuit bindings
> +
> +BD70528MWV is an ultra-low Iq general purpose single-chip power management IC
> +for battery-powered portable devices. The IC integrates 3 ultra-low current
> +consumption buck converters, 3 LDOs and 2 LED Drivers. Also included are 4
> +GPIOs, a real-time clock (RTC), a 32kHz clock gate, high-accuracy VREF
> +for use with an external ADC, flexible dual-input power path, 10 bits SAR ADC
> +for battery temperature monitor and 1S battery charger with scalable charge
> +currents.
> +
> +Required properties:
> + - compatible		: Should be "rohm,bd70528"
> + - reg			: I2C slave address.
> + - interrupt-parent	: Phandle to the parent interrupt controller.

Don't need to document this. It is implied and could be in the parent.

> + - interrupts		: The interrupt line the device is connected to.
> + - interrupt-controller	: To indicate bd70528 acts as an interrupt controller.
> + - #interrupt-cells	: Should be 2. usage is compliant to the 2 cells
> +			  variant of ../interrupt-controller/interrupts.txt
> + - gpio-controller	: To indicate bd70528 acts as a gpio controller.
> + - #gpio-cells		: Should be 2. The first cell is the pin number and
> +			  the second cell is used to specify flags. See
> +			  ../gpio/gpio.txt for more information.
> + - clock-frequency	: Should be 32768
> + - #clock-cells		: Should be 0.
> + - regulators:		: List of child nodes that specify the regulators.
> +			  Please see ../regulator/rohm,bd70528-regulator.txt
> +
> +Optional properties:
> + - clock-output-names	: Should contain name for output clock.
> +
> +Example:
> +/* external oscillator */
> +osc: oscillator {
> +	compatible = "fixed-clock";
> +	#clock-cells = <1>;
> +	clock-frequency  = <32768>;
> +	clock-output-names = "osc";
> +};
> +
> +pmic: bd70528@4b {

pmic@4b

> +	compatible = "rohm,bd70528";
> +	reg = <0x4b>;
> +	interrupt-parent = <&gpio1>;
> +	interrupts = <29 GPIO_ACTIVE_LOW>;
> +	clocks = <&osc 0>;
> +	#clock-cells = <0>;
> +	clock-output-names = "bd70528-32k-out";
> +	#gpio-cells = <2>;
> +	gpio-controller;
> +	interrupt-controller;
> +	#interrupt-cells = <2>;
> +
> +	regulators {
> +		buck1: BUCK1 {
> +			regulator-name = "buck1";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <3400000>;
> +			regulator-boot-on;
> +			regulator-ramp-delay = <125>;
> +		};
> +		buck2: BUCK2 {
> +			regulator-name = "buck2";
> +			regulator-min-microvolt = <1200000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-boot-on;
> +			regulator-ramp-delay = <125>;
> +		};
> +		buck3: BUCK3 {
> +			regulator-name = "buck3";
> +			regulator-min-microvolt = <800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-boot-on;
> +			regulator-ramp-delay = <250>;
> +		};
> +		ldo1: LDO1 {
> +			regulator-name = "ldo1";
> +			regulator-min-microvolt = <1650000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-boot-on;
> +		};
> +		ldo2: LDO2 {
> +			regulator-name = "ldo2";
> +			regulator-min-microvolt = <1650000>;
> +			regulator-max-microvolt = <3300000>;
> +			regulator-boot-on;
> +		};
> +
> +		ldo3: LDO3 {
> +			regulator-name = "ldo3";
> +			regulator-min-microvolt = <1650000>;
> +			regulator-max-microvolt = <3300000>;
> +		};
> +		led_ldo1: LED_LDO1 {
> +			regulator-name = "led_ldo1";
> +			regulator-min-microvolt = <200000>;
> +			regulator-max-microvolt = <300000>;
> +		};
> +		led_ldo2: LED_LDO2 {
> +			regulator-name = "led_ldo2";
> +			regulator-min-microvolt = <200000>;
> +			regulator-max-microvolt = <300000>;
> +		};
> +	};
> +};
> -- 
> 2.14.3
> 
> 
> -- 
> Matti Vaittinen
> ROHM Semiconductors
> 
> ~~~ "I don't think so," said Rene Descartes.  Just then, he vanished ~~~

  reply index

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-01-22  9:41 [RFC PATCH v1 00/13] support ROHM BD70528 PMIC Matti Vaittinen
2019-01-22  9:42 ` [RFC PATCH v1 01/13] regmap: regmap-irq: Add main status register support Matti Vaittinen
2019-01-23 15:55   ` Mark Brown
2019-01-22  9:42 ` [RFC PATCH v1 02/13] mfd: bd718x7.h split to ROHM common and bd718x7 specific parts Matti Vaittinen
2019-01-22  9:43 ` [RFC PATCH v1 03/13] regulator: bd718x7 use chip specific and generic data structs Matti Vaittinen
2019-01-23 15:51   ` Mark Brown
2019-01-24  7:16     ` Matti Vaittinen
2019-01-24 10:24       ` Mark Brown
2019-01-22  9:44 ` [RFC PATCH v1 04/13] clk: bd718x7: " Matti Vaittinen
2019-01-22  9:44 ` [RFC PATCH v1 05/13] mfd: bd70528: Support ROHM bd70528 PMIC - core Matti Vaittinen
2019-01-22 14:51   ` Guenter Roeck
2019-01-22 16:20     ` Matti Vaittinen
2019-01-22  9:45 ` [RFC PATCH v1 06/13] clk: bd718x7: Support ROHM BD70528 clk block Matti Vaittinen
2019-01-22  9:45 ` [RFC PATCH v1 07/13] devicetree: bindings: Document first ROHM BD70528 bindings Matti Vaittinen
2019-02-23  0:30   ` Rob Herring [this message]
2019-02-28  6:49     ` Matti Vaittinen
2019-02-28 15:37       ` Rob Herring
2019-01-22  9:46 ` [RFC PATCH v1 08/13] regulator: bd70528: Support ROHM BD70528 regulator block Matti Vaittinen
2019-01-22  9:46 ` [RFC PATCH v1 09/13] devicetree: bindings: ROHM bd70528 regulator bindings Matti Vaittinen
2019-01-22  9:47 ` [RFC PATCH v1 10/13] gpio: Initial support for ROHM bd70528 GPIO block Matti Vaittinen
2019-01-22  9:47 ` [RFC PATCH v1 11/13] rtc: bd70528: Initial support for ROHM bd70528 RTC Matti Vaittinen
2019-01-22 14:48   ` Guenter Roeck
2019-01-22 16:29     ` Matti Vaittinen
2019-01-22  9:48 ` [RFC PATCH v1 12/13] power: supply: Initial support for ROHM BD70528 PMIC charger block Matti Vaittinen
2019-01-22  9:48 ` [RFC PATCH v1 13/13] watchdog: bd70528: Initial support for ROHM BD70528 watchdog block Matti Vaittinen
2019-01-22 15:47   ` Guenter Roeck
2019-01-22 17:10     ` Matti Vaittinen
2019-01-22 17:40       ` Guenter Roeck
2019-01-22 18:03         ` Matti Vaittinen
2019-01-23 17:47           ` Sebastian Reichel
2019-01-24 10:44             ` Matti Vaittinen
2019-01-24 14:37               ` Guenter Roeck

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190223003041.GA16670@bogus \
    --to=robh@kernel.org \
    --cc=a.zummo@towertech.it \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=heikki.haikola@fi.rohmeurope.com \
    --cc=lee.jones@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pm@vger.kernel.org \
    --cc=linux-rtc@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=mark.rutland@arm.com \
    --cc=matti.vaittinen@fi.rohmeurope.com \
    --cc=mazziesaccount@gmail.com \
    --cc=mikko.mutanen@fi.rohmeurope.com \
    --cc=mturquette@baylibre.com \
    --cc=rafael@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=sre@kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org linux-watchdog@archiver.kernel.org
	public-inbox-index linux-watchdog


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/ public-inbox