On Wed, May 22, 2019 at 06:15:26PM +0200, Clément Péron wrote: > Hi Maxime, > > On Wed, 22 May 2019 at 12:32, Maxime Ripard wrote: > > > > On Tue, May 21, 2019 at 06:03:28PM +0200, Clément Péron wrote: > > > Allwinner H6 has a second watchdog on the r-blocks which is > > > compatible with the A31. > > > > > > This commit add the H6 compatible for the r_watchdog. > > > > > > Signed-off-by: Clément Péron > > > > Unless you have some evidence that the two blocks are different, then > > you should just reuse the same one. > > I have no evidence it's different nor identical, it's not documented > in the user manual. > I thought it would better to have separate bindings in case there is a > difference. > Than don't have and find later that we have to introduce one. It's a tradeoff. Pushing your logic to the limit, we would have a compatible for each controller embedded in an SoC. This would be unmaintainable, and slightly useless since that case is very unlikely. However, having differences between SoCs is quite common, hence why we have different compatibles for each SoC. Maxime -- Maxime Ripard, Bootlin Embedded Linux and Kernel engineering https://bootlin.com