Linux-Watchdog Archive on
 help / color / Atom feed
From: Guenter Roeck <>
To: Ivan Mikhaylov <>
Cc: Wim Van Sebroeck <>,
	Joel Stanley <>, Andrew Jeffery <>,,,,,
	Alexander Amelkin <>,, Rob Herring <>,
	Mark Rutland <>,
Subject: Re: [PATCH v3 3/4] watchdog/aspeed: add support for dual boot
Date: Tue, 27 Aug 2019 10:21:52 -0700
Message-ID: <> (raw)
In-Reply-To: <>

On Tue, Aug 27, 2019 at 07:54:25PM +0300, Ivan Mikhaylov wrote:
> to clear out boot code source and re-enable access to the primary SPI flash
> chip while booted via wdt2 from the alternate chip.
> AST2400 datasheet says:
> "In the 2nd flash booting mode, all the address mapping to CS0# would be
> re-directed to CS1#. And CS0# is not accessable under this mode. To access
> CS0#, firmware should clear the 2nd boot mode register in the WDT2 status
> register WDT30.bit[1]."
> Signed-off-by: Ivan Mikhaylov <>

Please run "checkpatch --strict" on this patch and fix the reported problems
(I _did_ ask for proper multi-line aligment before, but there are a couple
of other issues as well).


  reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-27 16:54 [PATCH v3 0/4] add dual-boot support Ivan Mikhaylov
2019-08-27 16:54 ` [PATCH v3 1/4] vesnin: add wdt2 section with alt-boot option Ivan Mikhaylov
2019-08-27 16:54 ` [PATCH v3 2/4] vesnin: add secondary SPI flash chip Ivan Mikhaylov
2019-08-27 16:54 ` [PATCH v3 3/4] watchdog/aspeed: add support for dual boot Ivan Mikhaylov
2019-08-27 17:21   ` Guenter Roeck [this message]
2019-08-27 16:54 ` [PATCH v3 4/4] aspeed/watchdog: Add access_cs0 option for alt-boot Ivan Mikhaylov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Watchdog Archive on

Archives are clonable:
	git clone --mirror linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ \
	public-inbox-index linux-watchdog

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone