Linux-Watchdog Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH 0/2] watchdog: Correct iTCO for Cannon Lake and beyond
@ 2019-08-09 12:45 Mika Westerberg
  2019-08-09 12:45 ` [PATCH 1/2] watchdog: iTCO: Add support for Cannon Lake PCH iTCO Mika Westerberg
  2019-08-09 12:45 ` [PATCH 2/2] i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond Mika Westerberg
  0 siblings, 2 replies; 8+ messages in thread
From: Mika Westerberg @ 2019-08-09 12:45 UTC (permalink / raw)
  To: Jean Delvare, Wolfram Sang, Wim Van Sebroeck, Guenter Roeck
  Cc: Mika Westerberg, linux-i2c, linux-watchdog

Hi,

Starting from Intel Cannon Lake PCH the NO_REBOOT bit which is required by
the iTCO driver was moved from private register space to be part of the
TCO1_CNT register. This series introduces a new iTCO version (6) that gets
set for Cannon Lake, Cedar Fork, Comet Lake, Elkhart Lake and Ice Lake
which are affected by this move.

Mika Westerberg (2):
  watchdog: iTCO: Add support for Cannon Lake PCH iTCO
  i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond

 drivers/i2c/busses/i2c-i801.c | 138 +++++++++++++++++++++-------------
 drivers/watchdog/iTCO_wdt.c   |  25 +++++-
 2 files changed, 109 insertions(+), 54 deletions(-)

-- 
2.20.1


^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, back to index

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-09 12:45 [PATCH 0/2] watchdog: Correct iTCO for Cannon Lake and beyond Mika Westerberg
2019-08-09 12:45 ` [PATCH 1/2] watchdog: iTCO: Add support for Cannon Lake PCH iTCO Mika Westerberg
2019-08-09 20:49   ` Guenter Roeck
2019-08-28 12:50   ` Jean Delvare
2019-08-28 13:04     ` Mika Westerberg
2019-08-09 12:45 ` [PATCH 2/2] i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond Mika Westerberg
2019-08-28 13:24   ` Jean Delvare
2019-08-28 13:34     ` Mika Westerberg

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org
	public-inbox-index linux-watchdog

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git