Linux-Watchdog Archive on
 help / color / Atom feed
From: Jorge Ramirez-Ortiz <>
Subject: [PATCH 0/2] qcom_wdt bark irq support
Date: Fri,  6 Sep 2019 22:54:09 +0200
Message-ID: <> (raw)

Support pre-timeout when the bark irq is avaible.

This is the fifth version of the patchset addressing all the review
issues to date:

    include linux/bits.h
    pretimeout only enables IRQs if value != 0
    remove unnecessary subtract operation
    add clarity to the conditional in the probe function
    revert the irq registration changes
    remove unnecessary include and private variable
    provide macro for WDT EN register values
    use pretimeout as per its API intent
    handle EPROBE_DEFER on get_irq
    modify the irq registration as per pm8916_wdt
    remove unecessary variable from the driver's private storage
     register the pre-timeout notifier.

With the second patch in the set, I took the oportunity to do some
cleanup in the same code base removing an unnecesary variable from the
driver's private storage.

Jorge Ramirez-Ortiz (2):
  watchdog: qcom: support pre-timeout when the bark irq is available
  watchdog: qcom: remove unnecessary variable from private storage

 drivers/watchdog/qcom-wdt.c | 85 +++++++++++++++++++++++++++++++------
 1 file changed, 72 insertions(+), 13 deletions(-)


             reply index

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-09-06 20:54 Jorge Ramirez-Ortiz [this message]
2019-09-06 20:54 ` [PATCH 1/2] watchdog: qcom: support pre-timeout when the bark irq is available Jorge Ramirez-Ortiz
2019-09-10 18:06   ` Guenter Roeck
2019-09-12  7:24     ` Jorge Ramirez-Ortiz, Linaro
2019-09-12 18:34       ` Guenter Roeck
2019-09-06 20:54 ` [PATCH 2/2] watchdog: qcom: remove unnecessary variable from private storage Jorge Ramirez-Ortiz
2019-09-10 18:08   ` Guenter Roeck

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Watchdog Archive on

Archives are clonable:
	git clone --mirror linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ \
	public-inbox-index linux-watchdog

Newsgroup available over NNTP:

AGPL code for this site: git clone public-inbox