linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU driver
@ 2019-10-23 17:47 Paul Cercueil
  2019-10-23 17:47 ` [PATCH v2 2/3] watchdog: jz4740: Use regmap " Paul Cercueil
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Paul Cercueil @ 2019-10-23 17:47 UTC (permalink / raw)
  To: Guenter Roeck, Wim Van Sebroeck
  Cc: linux-watchdog, linux-kernel, od, Paul Cercueil,
	Mathieu Malaterre, Artur Rojek

Instead of requesting the "ext" clock and handling the watchdog clock
divider and gating in the watchdog driver, we now request and use the
"wdt" clock that is supplied by the ingenic-timer "TCU" driver.

The major benefit is that the watchdog's clock rate and parent can now
be specified from within devicetree, instead of hardcoded in the driver.

Also, this driver won't poke anymore into the TCU registers to
enable/disable the clock, as this is now handled by the TCU driver.

On the bad side, we break the ABI with devicetree - as we now request a
different clock. In this very specific case it is still okay, as every
Ingenic JZ47xx-based board out there compile the devicetree within the
kernel; so it's still time to push breaking changes, in order to get a
clean devicetree that won't break once it musn't.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---

Notes:
    v2: Rebase on top of 5.4-rc4

 drivers/watchdog/Kconfig      |  1 +
 drivers/watchdog/jz4740_wdt.c | 75 ++++++++++++++---------------------
 2 files changed, 31 insertions(+), 45 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 58e7c100b6ad..6421187769cf 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1642,6 +1642,7 @@ config INDYDOG
 config JZ4740_WDT
 	tristate "Ingenic jz4740 SoC hardware watchdog"
 	depends on MACH_JZ4740 || MACH_JZ4780
+	depends on COMMON_CLK
 	select WATCHDOG_CORE
 	help
 	  Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.
diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
index c6052ae54f32..72920f09f4a7 100644
--- a/drivers/watchdog/jz4740_wdt.c
+++ b/drivers/watchdog/jz4740_wdt.c
@@ -18,19 +18,6 @@
 #include <linux/err.h>
 #include <linux/of.h>
 
-#include <asm/mach-jz4740/timer.h>
-
-#define JZ_WDT_CLOCK_PCLK 0x1
-#define JZ_WDT_CLOCK_RTC  0x2
-#define JZ_WDT_CLOCK_EXT  0x4
-
-#define JZ_WDT_CLOCK_DIV_1    (0 << TCU_TCSR_PRESCALE_LSB)
-#define JZ_WDT_CLOCK_DIV_4    (1 << TCU_TCSR_PRESCALE_LSB)
-#define JZ_WDT_CLOCK_DIV_16   (2 << TCU_TCSR_PRESCALE_LSB)
-#define JZ_WDT_CLOCK_DIV_64   (3 << TCU_TCSR_PRESCALE_LSB)
-#define JZ_WDT_CLOCK_DIV_256  (4 << TCU_TCSR_PRESCALE_LSB)
-#define JZ_WDT_CLOCK_DIV_1024 (5 << TCU_TCSR_PRESCALE_LSB)
-
 #define DEFAULT_HEARTBEAT 5
 #define MAX_HEARTBEAT     2048
 
@@ -50,7 +37,8 @@ MODULE_PARM_DESC(heartbeat,
 struct jz4740_wdt_drvdata {
 	struct watchdog_device wdt;
 	void __iomem *base;
-	struct clk *rtc_clk;
+	struct clk *clk;
+	unsigned long clk_rate;
 };
 
 static int jz4740_wdt_ping(struct watchdog_device *wdt_dev)
@@ -65,32 +53,14 @@ static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev,
 				    unsigned int new_timeout)
 {
 	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
-	unsigned int rtc_clk_rate;
-	unsigned int timeout_value;
-	unsigned short clock_div = JZ_WDT_CLOCK_DIV_1;
+	u16 timeout_value = (u16)(drvdata->clk_rate * new_timeout);
 	u8 tcer;
 
-	rtc_clk_rate = clk_get_rate(drvdata->rtc_clk);
-
-	timeout_value = rtc_clk_rate * new_timeout;
-	while (timeout_value > 0xffff) {
-		if (clock_div == JZ_WDT_CLOCK_DIV_1024) {
-			/* Requested timeout too high;
-			* use highest possible value. */
-			timeout_value = 0xffff;
-			break;
-		}
-		timeout_value >>= 2;
-		clock_div += (1 << TCU_TCSR_PRESCALE_LSB);
-	}
-
 	tcer = readb(drvdata->base + TCU_REG_WDT_TCER);
 	writeb(0x0, drvdata->base + TCU_REG_WDT_TCER);
-	writew(clock_div, drvdata->base + TCU_REG_WDT_TCSR);
 
 	writew((u16)timeout_value, drvdata->base + TCU_REG_WDT_TDR);
 	writew(0x0, drvdata->base + TCU_REG_WDT_TCNT);
-	writew(clock_div | JZ_WDT_CLOCK_RTC, drvdata->base + TCU_REG_WDT_TCSR);
 
 	if (tcer & TCU_WDT_TCER_TCEN)
 		writeb(TCU_WDT_TCER_TCEN, drvdata->base + TCU_REG_WDT_TCER);
@@ -102,11 +72,15 @@ static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev,
 static int jz4740_wdt_start(struct watchdog_device *wdt_dev)
 {
 	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+	int ret;
 	u8 tcer;
 
+	ret = clk_prepare_enable(drvdata->clk);
+	if (ret)
+		return ret;
+
 	tcer = readb(drvdata->base + TCU_REG_WDT_TCER);
 
-	jz4740_timer_enable_watchdog();
 	jz4740_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
 
 	/* Start watchdog if it wasn't started already */
@@ -121,7 +95,7 @@ static int jz4740_wdt_stop(struct watchdog_device *wdt_dev)
 	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
 
 	writeb(0x0, drvdata->base + TCU_REG_WDT_TCER);
-	jz4740_timer_disable_watchdog();
+	clk_disable_unprepare(drvdata->clk);
 
 	return 0;
 }
@@ -162,21 +136,38 @@ static int jz4740_wdt_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct jz4740_wdt_drvdata *drvdata;
 	struct watchdog_device *jz4740_wdt;
+	long rate;
+	int ret;
 
 	drvdata = devm_kzalloc(dev, sizeof(struct jz4740_wdt_drvdata),
 			       GFP_KERNEL);
 	if (!drvdata)
 		return -ENOMEM;
 
-	if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
-		heartbeat = DEFAULT_HEARTBEAT;
+	drvdata->clk = devm_clk_get(&pdev->dev, "wdt");
+	if (IS_ERR(drvdata->clk)) {
+		dev_err(&pdev->dev, "cannot find WDT clock\n");
+		return PTR_ERR(drvdata->clk);
+	}
+
+	/* Set smallest clock possible */
+	rate = clk_round_rate(drvdata->clk, 1);
+	if (rate < 0)
+		return rate;
+
+	ret = clk_set_rate(drvdata->clk, rate);
+	if (ret)
+		return ret;
 
+	drvdata->clk_rate = rate;
 	jz4740_wdt = &drvdata->wdt;
 	jz4740_wdt->info = &jz4740_wdt_info;
 	jz4740_wdt->ops = &jz4740_wdt_ops;
-	jz4740_wdt->timeout = heartbeat;
 	jz4740_wdt->min_timeout = 1;
-	jz4740_wdt->max_timeout = MAX_HEARTBEAT;
+	jz4740_wdt->max_timeout = 0xffff / rate;
+	jz4740_wdt->timeout = clamp(heartbeat,
+				    jz4740_wdt->min_timeout,
+				    jz4740_wdt->max_timeout);
 	jz4740_wdt->parent = dev;
 	watchdog_set_nowayout(jz4740_wdt, nowayout);
 	watchdog_set_drvdata(jz4740_wdt, drvdata);
@@ -185,12 +176,6 @@ static int jz4740_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(drvdata->base))
 		return PTR_ERR(drvdata->base);
 
-	drvdata->rtc_clk = devm_clk_get(dev, "rtc");
-	if (IS_ERR(drvdata->rtc_clk)) {
-		dev_err(dev, "cannot find RTC clock\n");
-		return PTR_ERR(drvdata->rtc_clk);
-	}
-
 	return devm_watchdog_register_device(dev, &drvdata->wdt);
 }
 
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v2 2/3] watchdog: jz4740: Use regmap provided by TCU driver
  2019-10-23 17:47 [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
@ 2019-10-23 17:47 ` Paul Cercueil
  2019-10-23 17:47 ` [PATCH v2 3/3] watchdog: jz4740: Drop dependency on MACH_JZ47xx Paul Cercueil
  2019-11-16 17:50 ` [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
  2 siblings, 0 replies; 5+ messages in thread
From: Paul Cercueil @ 2019-10-23 17:47 UTC (permalink / raw)
  To: Guenter Roeck, Wim Van Sebroeck
  Cc: linux-watchdog, linux-kernel, od, Paul Cercueil,
	Mathieu Malaterre, Artur Rojek

Since we broke the ABI by changing the clock, the driver was also
updated to use the regmap provided by the TCU driver.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---

Notes:
    v2: Rebase on top of 5.4-rc4

 drivers/watchdog/Kconfig      |  1 +
 drivers/watchdog/jz4740_wdt.c | 35 ++++++++++++++++++++---------------
 2 files changed, 21 insertions(+), 15 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 6421187769cf..dbef995856bf 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1644,6 +1644,7 @@ config JZ4740_WDT
 	depends on MACH_JZ4740 || MACH_JZ4780
 	depends on COMMON_CLK
 	select WATCHDOG_CORE
+	select MFD_SYSCON
 	help
 	  Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.
 
diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
index 72920f09f4a7..bdf9564efa29 100644
--- a/drivers/watchdog/jz4740_wdt.c
+++ b/drivers/watchdog/jz4740_wdt.c
@@ -5,6 +5,7 @@
  */
 
 #include <linux/mfd/ingenic-tcu.h>
+#include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/types.h>
@@ -17,6 +18,7 @@
 #include <linux/slab.h>
 #include <linux/err.h>
 #include <linux/of.h>
+#include <linux/regmap.h>
 
 #define DEFAULT_HEARTBEAT 5
 #define MAX_HEARTBEAT     2048
@@ -36,7 +38,7 @@ MODULE_PARM_DESC(heartbeat,
 
 struct jz4740_wdt_drvdata {
 	struct watchdog_device wdt;
-	void __iomem *base;
+	struct regmap *map;
 	struct clk *clk;
 	unsigned long clk_rate;
 };
@@ -45,7 +47,8 @@ static int jz4740_wdt_ping(struct watchdog_device *wdt_dev)
 {
 	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
 
-	writew(0x0, drvdata->base + TCU_REG_WDT_TCNT);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCNT, 0);
+
 	return 0;
 }
 
@@ -54,16 +57,16 @@ static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev,
 {
 	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
 	u16 timeout_value = (u16)(drvdata->clk_rate * new_timeout);
-	u8 tcer;
+	unsigned int tcer;
 
-	tcer = readb(drvdata->base + TCU_REG_WDT_TCER);
-	writeb(0x0, drvdata->base + TCU_REG_WDT_TCER);
+	regmap_read(drvdata->map, TCU_REG_WDT_TCER, &tcer);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCER, 0);
 
-	writew((u16)timeout_value, drvdata->base + TCU_REG_WDT_TDR);
-	writew(0x0, drvdata->base + TCU_REG_WDT_TCNT);
+	regmap_write(drvdata->map, TCU_REG_WDT_TDR, timeout_value);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCNT, 0);
 
 	if (tcer & TCU_WDT_TCER_TCEN)
-		writeb(TCU_WDT_TCER_TCEN, drvdata->base + TCU_REG_WDT_TCER);
+		regmap_write(drvdata->map, TCU_REG_WDT_TCER, TCU_WDT_TCER_TCEN);
 
 	wdt_dev->timeout = new_timeout;
 	return 0;
@@ -72,20 +75,20 @@ static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev,
 static int jz4740_wdt_start(struct watchdog_device *wdt_dev)
 {
 	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
+	unsigned int tcer;
 	int ret;
-	u8 tcer;
 
 	ret = clk_prepare_enable(drvdata->clk);
 	if (ret)
 		return ret;
 
-	tcer = readb(drvdata->base + TCU_REG_WDT_TCER);
+	regmap_read(drvdata->map, TCU_REG_WDT_TCER, &tcer);
 
 	jz4740_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
 
 	/* Start watchdog if it wasn't started already */
 	if (!(tcer & TCU_WDT_TCER_TCEN))
-		writeb(TCU_WDT_TCER_TCEN, drvdata->base + TCU_REG_WDT_TCER);
+		regmap_write(drvdata->map, TCU_REG_WDT_TCER, TCU_WDT_TCER_TCEN);
 
 	return 0;
 }
@@ -94,7 +97,7 @@ static int jz4740_wdt_stop(struct watchdog_device *wdt_dev)
 {
 	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
 
-	writeb(0x0, drvdata->base + TCU_REG_WDT_TCER);
+	regmap_write(drvdata->map, TCU_REG_WDT_TCER, 0);
 	clk_disable_unprepare(drvdata->clk);
 
 	return 0;
@@ -172,9 +175,11 @@ static int jz4740_wdt_probe(struct platform_device *pdev)
 	watchdog_set_nowayout(jz4740_wdt, nowayout);
 	watchdog_set_drvdata(jz4740_wdt, drvdata);
 
-	drvdata->base = devm_platform_ioremap_resource(pdev, 0);
-	if (IS_ERR(drvdata->base))
-		return PTR_ERR(drvdata->base);
+	drvdata->map = device_node_to_regmap(dev->parent->of_node);
+	if (!drvdata->map) {
+		dev_err(dev, "regmap not found\n");
+		return -EINVAL;
+	}
 
 	return devm_watchdog_register_device(dev, &drvdata->wdt);
 }
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* [PATCH v2 3/3] watchdog: jz4740: Drop dependency on MACH_JZ47xx
  2019-10-23 17:47 [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
  2019-10-23 17:47 ` [PATCH v2 2/3] watchdog: jz4740: Use regmap " Paul Cercueil
@ 2019-10-23 17:47 ` Paul Cercueil
  2019-11-16 17:50 ` [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
  2 siblings, 0 replies; 5+ messages in thread
From: Paul Cercueil @ 2019-10-23 17:47 UTC (permalink / raw)
  To: Guenter Roeck, Wim Van Sebroeck
  Cc: linux-watchdog, linux-kernel, od, Paul Cercueil

Depending on MACH_JZ47xx prevent us from creating a generic kernel that
works on more than one MIPS board. Instead, we just depend on MIPS being
set.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
---

Notes:
    v2: Rebase on top of 5.4-rc4

 drivers/watchdog/Kconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index dbef995856bf..fd4844f0a8f3 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1641,7 +1641,7 @@ config INDYDOG
 
 config JZ4740_WDT
 	tristate "Ingenic jz4740 SoC hardware watchdog"
-	depends on MACH_JZ4740 || MACH_JZ4780
+	depends on MIPS
 	depends on COMMON_CLK
 	select WATCHDOG_CORE
 	select MFD_SYSCON
-- 
2.23.0


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU driver
  2019-10-23 17:47 [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
  2019-10-23 17:47 ` [PATCH v2 2/3] watchdog: jz4740: Use regmap " Paul Cercueil
  2019-10-23 17:47 ` [PATCH v2 3/3] watchdog: jz4740: Drop dependency on MACH_JZ47xx Paul Cercueil
@ 2019-11-16 17:50 ` Paul Cercueil
  2019-11-17 15:51   ` Guenter Roeck
  2 siblings, 1 reply; 5+ messages in thread
From: Paul Cercueil @ 2019-11-16 17:50 UTC (permalink / raw)
  To: Guenter Roeck, Wim Van Sebroeck
  Cc: linux-watchdog, linux-kernel, od, Mathieu Malaterre, Artur Rojek

Hi Guenter,

I noticed you already acked all the patches in the V1 but expected them 
to go through the MIPS tree; could you take them into your tree instead?

Cheers,
-Paul


Le mer., oct. 23, 2019 at 19:47, Paul Cercueil <paul@crapouillou.net> a 
écrit :
> Instead of requesting the "ext" clock and handling the watchdog clock
> divider and gating in the watchdog driver, we now request and use the
> "wdt" clock that is supplied by the ingenic-timer "TCU" driver.
> 
> The major benefit is that the watchdog's clock rate and parent can now
> be specified from within devicetree, instead of hardcoded in the 
> driver.
> 
> Also, this driver won't poke anymore into the TCU registers to
> enable/disable the clock, as this is now handled by the TCU driver.
> 
> On the bad side, we break the ABI with devicetree - as we now request 
> a
> different clock. In this very specific case it is still okay, as every
> Ingenic JZ47xx-based board out there compile the devicetree within the
> kernel; so it's still time to push breaking changes, in order to get a
> clean devicetree that won't break once it musn't.
> 
> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
> Tested-by: Mathieu Malaterre <malat@debian.org>
> Tested-by: Artur Rojek <contact@artur-rojek.eu>
> Acked-by: Guenter Roeck <linux@roeck-us.net>
> ---
> 
> Notes:
>     v2: Rebase on top of 5.4-rc4
> 
>  drivers/watchdog/Kconfig      |  1 +
>  drivers/watchdog/jz4740_wdt.c | 75 
> ++++++++++++++---------------------
>  2 files changed, 31 insertions(+), 45 deletions(-)
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 58e7c100b6ad..6421187769cf 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1642,6 +1642,7 @@ config INDYDOG
>  config JZ4740_WDT
>  	tristate "Ingenic jz4740 SoC hardware watchdog"
>  	depends on MACH_JZ4740 || MACH_JZ4780
> +	depends on COMMON_CLK
>  	select WATCHDOG_CORE
>  	help
>  	  Hardware driver for the built-in watchdog timer on Ingenic jz4740 
> SoCs.
> diff --git a/drivers/watchdog/jz4740_wdt.c 
> b/drivers/watchdog/jz4740_wdt.c
> index c6052ae54f32..72920f09f4a7 100644
> --- a/drivers/watchdog/jz4740_wdt.c
> +++ b/drivers/watchdog/jz4740_wdt.c
> @@ -18,19 +18,6 @@
>  #include <linux/err.h>
>  #include <linux/of.h>
> 
> -#include <asm/mach-jz4740/timer.h>
> -
> -#define JZ_WDT_CLOCK_PCLK 0x1
> -#define JZ_WDT_CLOCK_RTC  0x2
> -#define JZ_WDT_CLOCK_EXT  0x4
> -
> -#define JZ_WDT_CLOCK_DIV_1    (0 << TCU_TCSR_PRESCALE_LSB)
> -#define JZ_WDT_CLOCK_DIV_4    (1 << TCU_TCSR_PRESCALE_LSB)
> -#define JZ_WDT_CLOCK_DIV_16   (2 << TCU_TCSR_PRESCALE_LSB)
> -#define JZ_WDT_CLOCK_DIV_64   (3 << TCU_TCSR_PRESCALE_LSB)
> -#define JZ_WDT_CLOCK_DIV_256  (4 << TCU_TCSR_PRESCALE_LSB)
> -#define JZ_WDT_CLOCK_DIV_1024 (5 << TCU_TCSR_PRESCALE_LSB)
> -
>  #define DEFAULT_HEARTBEAT 5
>  #define MAX_HEARTBEAT     2048
> 
> @@ -50,7 +37,8 @@ MODULE_PARM_DESC(heartbeat,
>  struct jz4740_wdt_drvdata {
>  	struct watchdog_device wdt;
>  	void __iomem *base;
> -	struct clk *rtc_clk;
> +	struct clk *clk;
> +	unsigned long clk_rate;
>  };
> 
>  static int jz4740_wdt_ping(struct watchdog_device *wdt_dev)
> @@ -65,32 +53,14 @@ static int jz4740_wdt_set_timeout(struct 
> watchdog_device *wdt_dev,
>  				    unsigned int new_timeout)
>  {
>  	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> -	unsigned int rtc_clk_rate;
> -	unsigned int timeout_value;
> -	unsigned short clock_div = JZ_WDT_CLOCK_DIV_1;
> +	u16 timeout_value = (u16)(drvdata->clk_rate * new_timeout);
>  	u8 tcer;
> 
> -	rtc_clk_rate = clk_get_rate(drvdata->rtc_clk);
> -
> -	timeout_value = rtc_clk_rate * new_timeout;
> -	while (timeout_value > 0xffff) {
> -		if (clock_div == JZ_WDT_CLOCK_DIV_1024) {
> -			/* Requested timeout too high;
> -			* use highest possible value. */
> -			timeout_value = 0xffff;
> -			break;
> -		}
> -		timeout_value >>= 2;
> -		clock_div += (1 << TCU_TCSR_PRESCALE_LSB);
> -	}
> -
>  	tcer = readb(drvdata->base + TCU_REG_WDT_TCER);
>  	writeb(0x0, drvdata->base + TCU_REG_WDT_TCER);
> -	writew(clock_div, drvdata->base + TCU_REG_WDT_TCSR);
> 
>  	writew((u16)timeout_value, drvdata->base + TCU_REG_WDT_TDR);
>  	writew(0x0, drvdata->base + TCU_REG_WDT_TCNT);
> -	writew(clock_div | JZ_WDT_CLOCK_RTC, drvdata->base + 
> TCU_REG_WDT_TCSR);
> 
>  	if (tcer & TCU_WDT_TCER_TCEN)
>  		writeb(TCU_WDT_TCER_TCEN, drvdata->base + TCU_REG_WDT_TCER);
> @@ -102,11 +72,15 @@ static int jz4740_wdt_set_timeout(struct 
> watchdog_device *wdt_dev,
>  static int jz4740_wdt_start(struct watchdog_device *wdt_dev)
>  {
>  	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> +	int ret;
>  	u8 tcer;
> 
> +	ret = clk_prepare_enable(drvdata->clk);
> +	if (ret)
> +		return ret;
> +
>  	tcer = readb(drvdata->base + TCU_REG_WDT_TCER);
> 
> -	jz4740_timer_enable_watchdog();
>  	jz4740_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
> 
>  	/* Start watchdog if it wasn't started already */
> @@ -121,7 +95,7 @@ static int jz4740_wdt_stop(struct watchdog_device 
> *wdt_dev)
>  	struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
> 
>  	writeb(0x0, drvdata->base + TCU_REG_WDT_TCER);
> -	jz4740_timer_disable_watchdog();
> +	clk_disable_unprepare(drvdata->clk);
> 
>  	return 0;
>  }
> @@ -162,21 +136,38 @@ static int jz4740_wdt_probe(struct 
> platform_device *pdev)
>  	struct device *dev = &pdev->dev;
>  	struct jz4740_wdt_drvdata *drvdata;
>  	struct watchdog_device *jz4740_wdt;
> +	long rate;
> +	int ret;
> 
>  	drvdata = devm_kzalloc(dev, sizeof(struct jz4740_wdt_drvdata),
>  			       GFP_KERNEL);
>  	if (!drvdata)
>  		return -ENOMEM;
> 
> -	if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
> -		heartbeat = DEFAULT_HEARTBEAT;
> +	drvdata->clk = devm_clk_get(&pdev->dev, "wdt");
> +	if (IS_ERR(drvdata->clk)) {
> +		dev_err(&pdev->dev, "cannot find WDT clock\n");
> +		return PTR_ERR(drvdata->clk);
> +	}
> +
> +	/* Set smallest clock possible */
> +	rate = clk_round_rate(drvdata->clk, 1);
> +	if (rate < 0)
> +		return rate;
> +
> +	ret = clk_set_rate(drvdata->clk, rate);
> +	if (ret)
> +		return ret;
> 
> +	drvdata->clk_rate = rate;
>  	jz4740_wdt = &drvdata->wdt;
>  	jz4740_wdt->info = &jz4740_wdt_info;
>  	jz4740_wdt->ops = &jz4740_wdt_ops;
> -	jz4740_wdt->timeout = heartbeat;
>  	jz4740_wdt->min_timeout = 1;
> -	jz4740_wdt->max_timeout = MAX_HEARTBEAT;
> +	jz4740_wdt->max_timeout = 0xffff / rate;
> +	jz4740_wdt->timeout = clamp(heartbeat,
> +				    jz4740_wdt->min_timeout,
> +				    jz4740_wdt->max_timeout);
>  	jz4740_wdt->parent = dev;
>  	watchdog_set_nowayout(jz4740_wdt, nowayout);
>  	watchdog_set_drvdata(jz4740_wdt, drvdata);
> @@ -185,12 +176,6 @@ static int jz4740_wdt_probe(struct 
> platform_device *pdev)
>  	if (IS_ERR(drvdata->base))
>  		return PTR_ERR(drvdata->base);
> 
> -	drvdata->rtc_clk = devm_clk_get(dev, "rtc");
> -	if (IS_ERR(drvdata->rtc_clk)) {
> -		dev_err(dev, "cannot find RTC clock\n");
> -		return PTR_ERR(drvdata->rtc_clk);
> -	}
> -
>  	return devm_watchdog_register_device(dev, &drvdata->wdt);
>  }
> 
> --
> 2.23.0
> 



^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU driver
  2019-11-16 17:50 ` [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
@ 2019-11-17 15:51   ` Guenter Roeck
  0 siblings, 0 replies; 5+ messages in thread
From: Guenter Roeck @ 2019-11-17 15:51 UTC (permalink / raw)
  To: Paul Cercueil, Wim Van Sebroeck
  Cc: linux-watchdog, linux-kernel, od, Mathieu Malaterre, Artur Rojek

On 11/16/19 9:50 AM, Paul Cercueil wrote:
> Hi Guenter,
> 
> I noticed you already acked all the patches in the V1 but expected them to go through the MIPS tree; could you take them into your tree instead?
> 
Hmm, I seem to recall there was a reason for it to go through the mips tree.
Maybe that reason no longer exists. I added the series to my watchdog-next
tree for Wim to pick up. We'll see what 0-day has to say.

Guenter

> Cheers,
> -Paul
> 
> 
> Le mer., oct. 23, 2019 at 19:47, Paul Cercueil <paul@crapouillou.net> a écrit :
>> Instead of requesting the "ext" clock and handling the watchdog clock
>> divider and gating in the watchdog driver, we now request and use the
>> "wdt" clock that is supplied by the ingenic-timer "TCU" driver.
>>
>> The major benefit is that the watchdog's clock rate and parent can now
>> be specified from within devicetree, instead of hardcoded in the driver.
>>
>> Also, this driver won't poke anymore into the TCU registers to
>> enable/disable the clock, as this is now handled by the TCU driver.
>>
>> On the bad side, we break the ABI with devicetree - as we now request a
>> different clock. In this very specific case it is still okay, as every
>> Ingenic JZ47xx-based board out there compile the devicetree within the
>> kernel; so it's still time to push breaking changes, in order to get a
>> clean devicetree that won't break once it musn't.
>>
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> Tested-by: Mathieu Malaterre <malat@debian.org>
>> Tested-by: Artur Rojek <contact@artur-rojek.eu>
>> Acked-by: Guenter Roeck <linux@roeck-us.net>
>> ---
>>
>> Notes:
>>     v2: Rebase on top of 5.4-rc4
>>
>>  drivers/watchdog/Kconfig      |  1 +
>>  drivers/watchdog/jz4740_wdt.c | 75 ++++++++++++++---------------------
>>  2 files changed, 31 insertions(+), 45 deletions(-)
>>
>> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
>> index 58e7c100b6ad..6421187769cf 100644
>> --- a/drivers/watchdog/Kconfig
>> +++ b/drivers/watchdog/Kconfig
>> @@ -1642,6 +1642,7 @@ config INDYDOG
>>  config JZ4740_WDT
>>      tristate "Ingenic jz4740 SoC hardware watchdog"
>>      depends on MACH_JZ4740 || MACH_JZ4780
>> +    depends on COMMON_CLK
>>      select WATCHDOG_CORE
>>      help
>>        Hardware driver for the built-in watchdog timer on Ingenic jz4740 SoCs.
>> diff --git a/drivers/watchdog/jz4740_wdt.c b/drivers/watchdog/jz4740_wdt.c
>> index c6052ae54f32..72920f09f4a7 100644
>> --- a/drivers/watchdog/jz4740_wdt.c
>> +++ b/drivers/watchdog/jz4740_wdt.c
>> @@ -18,19 +18,6 @@
>>  #include <linux/err.h>
>>  #include <linux/of.h>
>>
>> -#include <asm/mach-jz4740/timer.h>
>> -
>> -#define JZ_WDT_CLOCK_PCLK 0x1
>> -#define JZ_WDT_CLOCK_RTC  0x2
>> -#define JZ_WDT_CLOCK_EXT  0x4
>> -
>> -#define JZ_WDT_CLOCK_DIV_1    (0 << TCU_TCSR_PRESCALE_LSB)
>> -#define JZ_WDT_CLOCK_DIV_4    (1 << TCU_TCSR_PRESCALE_LSB)
>> -#define JZ_WDT_CLOCK_DIV_16   (2 << TCU_TCSR_PRESCALE_LSB)
>> -#define JZ_WDT_CLOCK_DIV_64   (3 << TCU_TCSR_PRESCALE_LSB)
>> -#define JZ_WDT_CLOCK_DIV_256  (4 << TCU_TCSR_PRESCALE_LSB)
>> -#define JZ_WDT_CLOCK_DIV_1024 (5 << TCU_TCSR_PRESCALE_LSB)
>> -
>>  #define DEFAULT_HEARTBEAT 5
>>  #define MAX_HEARTBEAT     2048
>>
>> @@ -50,7 +37,8 @@ MODULE_PARM_DESC(heartbeat,
>>  struct jz4740_wdt_drvdata {
>>      struct watchdog_device wdt;
>>      void __iomem *base;
>> -    struct clk *rtc_clk;
>> +    struct clk *clk;
>> +    unsigned long clk_rate;
>>  };
>>
>>  static int jz4740_wdt_ping(struct watchdog_device *wdt_dev)
>> @@ -65,32 +53,14 @@ static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev,
>>                      unsigned int new_timeout)
>>  {
>>      struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
>> -    unsigned int rtc_clk_rate;
>> -    unsigned int timeout_value;
>> -    unsigned short clock_div = JZ_WDT_CLOCK_DIV_1;
>> +    u16 timeout_value = (u16)(drvdata->clk_rate * new_timeout);
>>      u8 tcer;
>>
>> -    rtc_clk_rate = clk_get_rate(drvdata->rtc_clk);
>> -
>> -    timeout_value = rtc_clk_rate * new_timeout;
>> -    while (timeout_value > 0xffff) {
>> -        if (clock_div == JZ_WDT_CLOCK_DIV_1024) {
>> -            /* Requested timeout too high;
>> -            * use highest possible value. */
>> -            timeout_value = 0xffff;
>> -            break;
>> -        }
>> -        timeout_value >>= 2;
>> -        clock_div += (1 << TCU_TCSR_PRESCALE_LSB);
>> -    }
>> -
>>      tcer = readb(drvdata->base + TCU_REG_WDT_TCER);
>>      writeb(0x0, drvdata->base + TCU_REG_WDT_TCER);
>> -    writew(clock_div, drvdata->base + TCU_REG_WDT_TCSR);
>>
>>      writew((u16)timeout_value, drvdata->base + TCU_REG_WDT_TDR);
>>      writew(0x0, drvdata->base + TCU_REG_WDT_TCNT);
>> -    writew(clock_div | JZ_WDT_CLOCK_RTC, drvdata->base + TCU_REG_WDT_TCSR);
>>
>>      if (tcer & TCU_WDT_TCER_TCEN)
>>          writeb(TCU_WDT_TCER_TCEN, drvdata->base + TCU_REG_WDT_TCER);
>> @@ -102,11 +72,15 @@ static int jz4740_wdt_set_timeout(struct watchdog_device *wdt_dev,
>>  static int jz4740_wdt_start(struct watchdog_device *wdt_dev)
>>  {
>>      struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
>> +    int ret;
>>      u8 tcer;
>>
>> +    ret = clk_prepare_enable(drvdata->clk);
>> +    if (ret)
>> +        return ret;
>> +
>>      tcer = readb(drvdata->base + TCU_REG_WDT_TCER);
>>
>> -    jz4740_timer_enable_watchdog();
>>      jz4740_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
>>
>>      /* Start watchdog if it wasn't started already */
>> @@ -121,7 +95,7 @@ static int jz4740_wdt_stop(struct watchdog_device *wdt_dev)
>>      struct jz4740_wdt_drvdata *drvdata = watchdog_get_drvdata(wdt_dev);
>>
>>      writeb(0x0, drvdata->base + TCU_REG_WDT_TCER);
>> -    jz4740_timer_disable_watchdog();
>> +    clk_disable_unprepare(drvdata->clk);
>>
>>      return 0;
>>  }
>> @@ -162,21 +136,38 @@ static int jz4740_wdt_probe(struct platform_device *pdev)
>>      struct device *dev = &pdev->dev;
>>      struct jz4740_wdt_drvdata *drvdata;
>>      struct watchdog_device *jz4740_wdt;
>> +    long rate;
>> +    int ret;
>>
>>      drvdata = devm_kzalloc(dev, sizeof(struct jz4740_wdt_drvdata),
>>                     GFP_KERNEL);
>>      if (!drvdata)
>>          return -ENOMEM;
>>
>> -    if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
>> -        heartbeat = DEFAULT_HEARTBEAT;
>> +    drvdata->clk = devm_clk_get(&pdev->dev, "wdt");
>> +    if (IS_ERR(drvdata->clk)) {
>> +        dev_err(&pdev->dev, "cannot find WDT clock\n");
>> +        return PTR_ERR(drvdata->clk);
>> +    }
>> +
>> +    /* Set smallest clock possible */
>> +    rate = clk_round_rate(drvdata->clk, 1);
>> +    if (rate < 0)
>> +        return rate;
>> +
>> +    ret = clk_set_rate(drvdata->clk, rate);
>> +    if (ret)
>> +        return ret;
>>
>> +    drvdata->clk_rate = rate;
>>      jz4740_wdt = &drvdata->wdt;
>>      jz4740_wdt->info = &jz4740_wdt_info;
>>      jz4740_wdt->ops = &jz4740_wdt_ops;
>> -    jz4740_wdt->timeout = heartbeat;
>>      jz4740_wdt->min_timeout = 1;
>> -    jz4740_wdt->max_timeout = MAX_HEARTBEAT;
>> +    jz4740_wdt->max_timeout = 0xffff / rate;
>> +    jz4740_wdt->timeout = clamp(heartbeat,
>> +                    jz4740_wdt->min_timeout,
>> +                    jz4740_wdt->max_timeout);
>>      jz4740_wdt->parent = dev;
>>      watchdog_set_nowayout(jz4740_wdt, nowayout);
>>      watchdog_set_drvdata(jz4740_wdt, drvdata);
>> @@ -185,12 +176,6 @@ static int jz4740_wdt_probe(struct platform_device *pdev)
>>      if (IS_ERR(drvdata->base))
>>          return PTR_ERR(drvdata->base);
>>
>> -    drvdata->rtc_clk = devm_clk_get(dev, "rtc");
>> -    if (IS_ERR(drvdata->rtc_clk)) {
>> -        dev_err(dev, "cannot find RTC clock\n");
>> -        return PTR_ERR(drvdata->rtc_clk);
>> -    }
>> -
>>      return devm_watchdog_register_device(dev, &drvdata->wdt);
>>  }
>>
>> -- 
>> 2.23.0
>>
> 
> 
> 


^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2019-11-17 15:51 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-23 17:47 [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
2019-10-23 17:47 ` [PATCH v2 2/3] watchdog: jz4740: Use regmap " Paul Cercueil
2019-10-23 17:47 ` [PATCH v2 3/3] watchdog: jz4740: Drop dependency on MACH_JZ47xx Paul Cercueil
2019-11-16 17:50 ` [PATCH v2 1/3] watchdog: jz4740: Use WDT clock provided by TCU driver Paul Cercueil
2019-11-17 15:51   ` Guenter Roeck

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).