Linux-Watchdog Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH v3 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe
@ 2019-11-22 13:22 Christophe Roullier
  2019-11-22 18:15 ` Guenter Roeck
  0 siblings, 1 reply; 2+ messages in thread
From: Christophe Roullier @ 2019-11-22 13:22 UTC (permalink / raw)
  To: wim, linux, mcoquelin.stm32, alexandre.torgue
  Cc: linux-watchdog, christophe.roullier, linux-kernel, linux-stm32,
	linux-arm-kernel

If the watchdog hardware is already enabled during the boot process,
when the Linux watchdog driver loads, it should start/reset the watchdog
and tell the watchdog framework. As a result, ping can be generated from
the watchdog framework (if CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set),
until the userspace watchdog daemon takes over control

Fixes:4332d113c66a ("watchdog: Add STM32 IWDG driver")

Signed-off-by: Christophe Roullier <christophe.roullier@st.com>
---
Changes since v2:
According to Guenter
removed intermediate variable

I've tested some config and it is working as expected:
Watchdog enable in Uboot + HANDLE_BOOT_ENABLE is not set + daemon watchdog in userland ON ==> No reset IWDG2
Watchdog enable in Uboot + HANDLE_BOOT_ENABLE is not set ==> Reset IWDG2
Watchdog enable in Uboot + HANDLE_BOOT_ENABLE=y ==> No reset IWDG2
Watchdog enable in Uboot + HANDLE_BOOT_ENABLE=y + daemon watchdog in userland ON puis OFF ==> Reset IWDG2
Watchdog disable in Uboot + HANDLE_BOOT_ENABLE is not set ==> No reset IWDG2
Watchdog disable in Uboot + HANDLE_BOOT_ENABLE=y ==> No reset IWDG2
Watchdog disable in Uboot + HANDLE_BOOT_ENABLE=y + daemon watchdog in userland ON ==> No reset IWDG2
Watchdog disable in Uboot + HANDLE_BOOT_ENABLE=y + daemon watchdog in userland ON puis OFF ==> Reset IWDG2

Thanks,
Christophe

 drivers/watchdog/stm32_iwdg.c | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

diff --git a/drivers/watchdog/stm32_iwdg.c b/drivers/watchdog/stm32_iwdg.c
index a3a329011a06..25188d6bbe15 100644
--- a/drivers/watchdog/stm32_iwdg.c
+++ b/drivers/watchdog/stm32_iwdg.c
@@ -262,6 +262,24 @@ static int stm32_iwdg_probe(struct platform_device *pdev)
 	watchdog_set_nowayout(wdd, WATCHDOG_NOWAYOUT);
 	watchdog_init_timeout(wdd, 0, dev);
 
+	/*
+	 * In case of CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED is set
+	 * (Means U-Boot/bootloaders leaves the watchdog running)
+	 * When we get here we should make a decision to prevent
+	 * any side effects before user space daemon will take care of it.
+	 * The best option, taking into consideration that there is no
+	 * way to read values back from hardware, is to enforce watchdog
+	 * being run with deterministic values.
+	 */
+	if (IS_ENABLED(CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED)) {
+		ret = stm32_iwdg_start(wdd);
+		if (ret)
+			return ret;
+
+		/* Make sure the watchdog is serviced */
+		set_bit(WDOG_HW_RUNNING, &wdd->status);
+	}
+
 	ret = devm_watchdog_register_device(dev, wdd);
 	if (ret)
 		return ret;
-- 
2.17.1


^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, back to index

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-22 13:22 [PATCH v3 1/1] drivers: watchdog: stm32_iwdg: set WDOG_HW_RUNNING at probe Christophe Roullier
2019-11-22 18:15 ` Guenter Roeck

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org
	public-inbox-index linux-watchdog

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git