Linux-Watchdog Archive on lore.kernel.org
 help / color / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Ansuel Smith <ansuelsmth@gmail.com>
Cc: Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	linux-arm-msm@vger.kernel.org, linux-watchdog@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH] watchdog: qcom-wdt: disable pretimeout on timer platform
Date: Tue, 4 Feb 2020 11:32:44 -0800
Message-ID: <20200204193244.GA21752@roeck-us.net> (raw)
In-Reply-To: <20200204184322.22744-1-ansuelsmth@gmail.com>

On Tue, Feb 04, 2020 at 07:43:22PM +0100, Ansuel Smith wrote:
> Some platform like ipq806x doesn't support pretimeout and define
> some interrupts used by qcom,msm-timer. Change the driver to check
> and use pretimeout only on qcom,kpss-wdt as it's the only platform
> that actually supports it.
> 
> Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
> ---
>  drivers/watchdog/qcom-wdt.c | 31 +++++++++++++++++++++++--------
>  1 file changed, 23 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
> index a494543d3ae1..195fe49ca32e 100644
> --- a/drivers/watchdog/qcom-wdt.c
> +++ b/drivers/watchdog/qcom-wdt.c
> @@ -40,6 +40,11 @@ static const u32 reg_offset_data_kpss[] = {
>  	[WDT_BITE_TIME] = 0x14,
>  };
>  
> +struct qcom_wdt_match_data {
> +	const u32 *offset;
> +	bool pretimeout;
> +};
> +
>  struct qcom_wdt {
>  	struct watchdog_device	wdd;
>  	unsigned long		rate;
> @@ -179,19 +184,29 @@ static void qcom_clk_disable_unprepare(void *data)
>  	clk_disable_unprepare(data);
>  }
>  
> +static const struct qcom_wdt_match_data match_data_apcs_tmr = {
> +	.offset = reg_offset_data_apcs_tmr,
> +	.pretimeout = false,
> +};
> +
> +static const struct qcom_wdt_match_data match_data_kpss = {
> +	.offset = reg_offset_data_kpss,
> +	.pretimeout = true,
> +};
> +
>  static int qcom_wdt_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
>  	struct qcom_wdt *wdt;
>  	struct resource *res;
>  	struct device_node *np = dev->of_node;
> -	const u32 *regs;
> +	const struct qcom_wdt_match_data *data;
>  	u32 percpu_offset;
>  	int irq, ret;
>  	struct clk *clk;
>  
> -	regs = of_device_get_match_data(dev);
> -	if (!regs) {
> +	data = of_device_get_match_data(dev);
> +	if (!data && !data->offset) {

This should be ||. However, the second check is really unnecessary
(it would be a coding error).

Guenter

>  		dev_err(dev, "Unsupported QCOM WDT module\n");
>  		return -ENODEV;
>  	}
> @@ -247,7 +262,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
>  
>  	/* check if there is pretimeout support */
>  	irq = platform_get_irq(pdev, 0);
> -	if (irq > 0) {
> +	if (data->pretimeout && irq > 0) {
>  		ret = devm_request_irq(dev, irq, qcom_wdt_isr,
>  				       IRQF_TRIGGER_RISING,
>  				       "wdt_bark", &wdt->wdd);
> @@ -267,7 +282,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
>  	wdt->wdd.min_timeout = 1;
>  	wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
>  	wdt->wdd.parent = dev;
> -	wdt->layout = regs;
> +	wdt->layout = data->offset;
>  
>  	if (readl(wdt_addr(wdt, WDT_STS)) & 1)
>  		wdt->wdd.bootstatus = WDIOF_CARDRESET;
> @@ -311,9 +326,9 @@ static int __maybe_unused qcom_wdt_resume(struct device *dev)
>  static SIMPLE_DEV_PM_OPS(qcom_wdt_pm_ops, qcom_wdt_suspend, qcom_wdt_resume);
>  
>  static const struct of_device_id qcom_wdt_of_table[] = {
> -	{ .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr },
> -	{ .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr },
> -	{ .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss },
> +	{ .compatible = "qcom,kpss-timer", .data = &match_data_apcs_tmr },
> +	{ .compatible = "qcom,scss-timer", .data = &match_data_apcs_tmr },
> +	{ .compatible = "qcom,kpss-wdt", .data = &match_data_kpss },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
> -- 
> 2.24.0
> 

      reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-04 18:43 Ansuel Smith
2020-02-04 19:32 ` Guenter Roeck [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200204193244.GA21752@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=agross@kernel.org \
    --cc=ansuelsmth@gmail.com \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org
	public-inbox-index linux-watchdog

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git