Linux-Watchdog Archive on lore.kernel.org
 help / color / Atom feed
From: Ansuel Smith <ansuelsmth@gmail.com>
To: unlisted-recipients:; (no To-header on input)
Cc: Ansuel Smith <ansuelsmth@gmail.com>,
	Andy Gross <agross@kernel.org>,
	Bjorn Andersson <bjorn.andersson@linaro.org>,
	Wim Van Sebroeck <wim@linux-watchdog.org>,
	Guenter Roeck <linux@roeck-us.net>,
	linux-arm-msm@vger.kernel.org, linux-watchdog@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH v2] watchdog: qcom-wdt: disable pretimeout on timer platform
Date: Tue,  4 Feb 2020 20:56:48 +0100
Message-ID: <20200204195648.23350-1-ansuelsmth@gmail.com> (raw)

Some platform like ipq806x doesn't support pretimeout and define
some interrupts used by qcom,msm-timer. Change the driver to check
and use pretimeout only on qcom,kpss-wdt as it's the only platform
that actually supports it.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
---
 drivers/watchdog/qcom-wdt.c | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/watchdog/qcom-wdt.c b/drivers/watchdog/qcom-wdt.c
index a494543d3ae1..d13c75028985 100644
--- a/drivers/watchdog/qcom-wdt.c
+++ b/drivers/watchdog/qcom-wdt.c
@@ -40,6 +40,11 @@ static const u32 reg_offset_data_kpss[] = {
 	[WDT_BITE_TIME] = 0x14,
 };
 
+struct qcom_wdt_match_data {
+	const u32 *offset;
+	bool pretimeout;
+};
+
 struct qcom_wdt {
 	struct watchdog_device	wdd;
 	unsigned long		rate;
@@ -179,19 +184,29 @@ static void qcom_clk_disable_unprepare(void *data)
 	clk_disable_unprepare(data);
 }
 
+static const struct qcom_wdt_match_data match_data_apcs_tmr = {
+	.offset = reg_offset_data_apcs_tmr,
+	.pretimeout = false,
+};
+
+static const struct qcom_wdt_match_data match_data_kpss = {
+	.offset = reg_offset_data_kpss,
+	.pretimeout = true,
+};
+
 static int qcom_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct qcom_wdt *wdt;
 	struct resource *res;
 	struct device_node *np = dev->of_node;
-	const u32 *regs;
+	const struct qcom_wdt_match_data *data;
 	u32 percpu_offset;
 	int irq, ret;
 	struct clk *clk;
 
-	regs = of_device_get_match_data(dev);
-	if (!regs) {
+	data = of_device_get_match_data(dev);
+	if (!data) {
 		dev_err(dev, "Unsupported QCOM WDT module\n");
 		return -ENODEV;
 	}
@@ -247,7 +262,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
 
 	/* check if there is pretimeout support */
 	irq = platform_get_irq(pdev, 0);
-	if (irq > 0) {
+	if (data->pretimeout && irq > 0) {
 		ret = devm_request_irq(dev, irq, qcom_wdt_isr,
 				       IRQF_TRIGGER_RISING,
 				       "wdt_bark", &wdt->wdd);
@@ -267,7 +282,7 @@ static int qcom_wdt_probe(struct platform_device *pdev)
 	wdt->wdd.min_timeout = 1;
 	wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
 	wdt->wdd.parent = dev;
-	wdt->layout = regs;
+	wdt->layout = data->offset;
 
 	if (readl(wdt_addr(wdt, WDT_STS)) & 1)
 		wdt->wdd.bootstatus = WDIOF_CARDRESET;
@@ -311,9 +326,9 @@ static int __maybe_unused qcom_wdt_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(qcom_wdt_pm_ops, qcom_wdt_suspend, qcom_wdt_resume);
 
 static const struct of_device_id qcom_wdt_of_table[] = {
-	{ .compatible = "qcom,kpss-timer", .data = reg_offset_data_apcs_tmr },
-	{ .compatible = "qcom,scss-timer", .data = reg_offset_data_apcs_tmr },
-	{ .compatible = "qcom,kpss-wdt", .data = reg_offset_data_kpss },
+	{ .compatible = "qcom,kpss-timer", .data = &match_data_apcs_tmr },
+	{ .compatible = "qcom,scss-timer", .data = &match_data_apcs_tmr },
+	{ .compatible = "qcom,kpss-wdt", .data = &match_data_kpss },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
-- 
2.24.0


             reply index

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-04 19:56 Ansuel Smith [this message]
2020-02-04 20:55 ` Guenter Roeck

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200204195648.23350-1-ansuelsmth@gmail.com \
    --to=ansuelsmth@gmail.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org
	public-inbox-index linux-watchdog

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git