Linux-Watchdog Archive on lore.kernel.org
 help / color / Atom feed
From: Michael Walle <michael@walle.cc>
To: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-hwmon@vger.kernel.org,
	linux-pwm@vger.kernel.org, linux-watchdog@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Cc: "Linus Walleij" <linus.walleij@linaro.org>,
	"Bartosz Golaszewski" <bgolaszewski@baylibre.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Jean Delvare" <jdelvare@suse.com>,
	"Guenter Roeck" <linux@roeck-us.net>,
	"Lee Jones" <lee.jones@linaro.org>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>,
	"Wim Van Sebroeck" <wim@linux-watchdog.org>,
	"Shawn Guo" <shawnguo@kernel.org>, "Li Yang" <leoyang.li@nxp.com>,
	"Thomas Gleixner" <tglx@linutronix.de>,
	"Jason Cooper" <jason@lakedaemon.net>,
	"Marc Zyngier" <maz@kernel.org>,
	"Mark Brown" <broonie@kernel.org>,
	"Greg Kroah-Hartman" <gregkh@linuxfoundation.org>,
	"Andy Shevchenko" <andriy.shevchenko@linux.intel.com>,
	"Michael Walle" <michael@walle.cc>
Subject: [PATCH v4 01/11] dt-bindings: mfd: Add bindings for sl28cpld
Date: Thu,  4 Jun 2020 23:10:29 +0200
Message-ID: <20200604211039.12689-2-michael@walle.cc> (raw)
In-Reply-To: <20200604211039.12689-1-michael@walle.cc>

Add a device tree bindings for the board management controller found on
the Kontron SMARC-sAL28 board.

Signed-off-by: Michael Walle <michael@walle.cc>
---
 .../bindings/gpio/kontron,sl28cpld-gpio.yaml  |  54 +++++++
 .../hwmon/kontron,sl28cpld-hwmon.yaml         |  27 ++++
 .../kontron,sl28cpld-intc.yaml                |  54 +++++++
 .../bindings/mfd/kontron,sl28cpld.yaml        | 153 ++++++++++++++++++
 .../bindings/pwm/kontron,sl28cpld-pwm.yaml    |  35 ++++
 .../watchdog/kontron,sl28cpld-wdt.yaml        |  35 ++++
 6 files changed, 358 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
 create mode 100644 Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
 create mode 100644 Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
 create mode 100644 Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
 create mode 100644 Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml

diff --git a/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
new file mode 100644
index 000000000000..9a63a158a796
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/kontron,sl28cpld-gpio.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/kontron,sl28cpld-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
+
+  There are three flavors of the GPIO controller, one full featured
+  input/output with interrupt support (kontron,sl28cpld-gpio), one
+  output-only (kontron,sl28-gpo) and one input-only (kontron,sl28-gpi).
+
+  Each controller supports 8 GPIO lines.
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-gpio
+      - kontron,sl28cpld-gpi
+      - kontron,sl28cpld-gpo
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+  "#gpio-cells":
+    const: 2
+
+  gpio-controller: true
+
+  gpio-line-names:
+      minItems: 1
+      maxItems: 8
+
+required:
+  - compatible
+  - "#gpio-cells"
+  - gpio-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
new file mode 100644
index 000000000000..1cebd61c6c32
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/kontron,sl28cpld-hwmon.yaml
@@ -0,0 +1,27 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/kontron,sl28cpld-hwmon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Hardware monitoring driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-fan
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
new file mode 100644
index 000000000000..4c39e9ff9aea
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/kontron,sl28cpld-intc.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/kontron,sl28cpld-intc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Interrupt controller driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
+
+  The following interrupts are available. All types and levels are fixed
+  and handled by the board management controller.
+
+  ==== ============= ==================================
+   IRQ line/device   description
+  ==== ============= ==================================
+    0  RTC_INT#      Interrupt line from on-board RTC
+    1  SMB_ALERT#    Event on SMB_ALERT# line (P1)
+    2  ESPI_ALERT0#  Event on ESPI_ALERT0# line (S43)
+    3  ESPI_ALERT1#  Event on ESPI_ALERT1# line (S44)
+    4  PWR_BTN#      Event on PWR_BTN# line (P128)
+    5  SLEEP#        Event on SLEEP# line (S149)
+    6  watchdog      Interrupt of the internal watchdog
+    7  n/a           not used
+  ==== ============= ==================================
+
+properties:
+  compatible:
+    enum:
+      - kontron,sl28cpld-intc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupt-controller: true
+
+required:
+  - compatible
+  - interrupts
+  - "#interrupt-cells"
+  - interrupt-controller
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
new file mode 100644
index 000000000000..1d13bb24afb8
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kontron's sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  The board management controller may contain different IP blocks like
+  watchdog, fan monitoring, PWM controller, interrupt controller and a
+  GPIO controller.
+
+properties:
+  compatible:
+    const: kontron,sl28cpld-r1
+
+  reg:
+    description:
+      I2C device address.
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#interrupt-cells":
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+patternProperties:
+  "^gpio(@[0-9]+)?$":
+    $ref: ../gpio/kontron,sl28cpld-gpio.yaml
+
+  "^hwmon(@[0-9]+)?$":
+    $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
+
+  "^interrupt-controller(@[0-9]+)?$":
+    $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
+
+  "^pwm(@[0-9]+)?$":
+    $ref: ../pwm/kontron,sl28cpld-pwm.yaml
+
+  "^watchdog(@[0-9]+)?$":
+    $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        sl28cpld@4a {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            compatible = "kontron,sl28cpld-r1";
+            reg = <0x4a>;
+
+            watchdog@4 {
+                compatible = "kontron,sl28cpld-wdt";
+                reg = <0x4>;
+                kontron,assert-wdt-timeout-pin;
+            };
+
+            hwmon@b {
+                compatible = "kontron,sl28cpld-fan";
+                reg = <0xb>;
+            };
+
+            pwm@c {
+                #pwm-cells = <2>;
+                compatible = "kontron,sl28cpld-pwm";
+                reg = <0xc>;
+            };
+
+            pwm@e {
+                #pwm-cells = <2>;
+                compatible = "kontron,sl28cpld-pwm";
+                reg = <0xe>;
+            };
+
+            gpio@10 {
+                compatible = "kontron,sl28cpld-gpio";
+                reg = <0x10>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+                gpio-line-names = "a", "b", "c";
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+
+            gpio@15 {
+                compatible = "kontron,sl28cpld-gpio";
+                reg = <0x15>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+
+            gpio@1a {
+                compatible = "kontron,sl28cpld-gpo";
+                reg = <0x1a>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            gpio@1b {
+                compatible = "kontron,sl28cpld-gpi";
+                reg = <0x1b>;
+
+                gpio-controller;
+                #gpio-cells = <2>;
+            };
+
+            interrupt-controller@1c {
+                compatible = "kontron,sl28cpld-intc";
+                reg = <0x1c>;
+                interrupts-extended = <&gpio2 6
+                               IRQ_TYPE_EDGE_FALLING>;
+
+                interrupt-controller;
+                #interrupt-cells = <2>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
new file mode 100644
index 000000000000..02fe88c30233
--- /dev/null
+++ b/Documentation/devicetree/bindings/pwm/kontron,sl28cpld-pwm.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pwm/kontron,sl28cpld-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: PWM driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
+
+  The controller supports one PWM channel and supports only four distinct
+  frequencies (250Hz, 500Hz, 1kHz, 2kHz).
+
+allOf:
+  - $ref: pwm.yaml#
+
+properties:
+  compatible:
+    const: kontron,sl28cpld-pwm
+
+  reg:
+    maxItems: 1
+
+  "#pwm-cells":
+    const: 2
+
+required:
+  - compatible
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
new file mode 100644
index 000000000000..dd6559f2973a
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/kontron,sl28cpld-wdt.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/kontron,sl28cpld-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Watchdog driver for the sl28cpld board management controller
+
+maintainers:
+  - Michael Walle <michael@walle.cc>
+
+description: |
+  This module is part of the sl28cpld multi-function device. For more
+  details see Documentation/devicetree/bindings/mfd/kontron,sl28cpld.yaml.
+
+allOf:
+  - $ref: watchdog.yaml#
+
+properties:
+  compatible:
+    const: kontron,sl28cpld-wdt
+
+  reg:
+    maxItems: 1
+
+  kontron,assert-wdt-timeout-pin:
+    description: The SMARC standard defines a WDT_TIME_OUT# pin. If this
+      property is set, this output will be pulsed when the watchdog bites
+      and the system resets.
+    type: boolean
+
+required:
+  - compatible
+
+additionalProperties: false
-- 
2.20.1


  reply index

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-04 21:10 [PATCH v4 00/11] Add support for Kontron sl28cpld Michael Walle
2020-06-04 21:10 ` Michael Walle [this message]
2020-06-09 16:28   ` [PATCH v4 01/11] dt-bindings: mfd: Add bindings for sl28cpld Rob Herring
2020-06-04 21:10 ` [PATCH v4 02/11] mfd: Add support for Kontron sl28cpld management controller Michael Walle
2020-06-05  6:57   ` Lee Jones
2020-06-05  9:51     ` Michael Walle
2020-06-05 10:50     ` Mark Brown
2020-06-05 20:07       ` Michael Walle
2020-06-06 11:46         ` Mark Brown
2020-06-06 12:45           ` Michael Walle
2020-06-08  8:28             ` Lee Jones
2020-06-08 10:02               ` Andy Shevchenko
2020-06-08 15:41                 ` Michael Walle
2020-06-08 18:56                   ` Lee Jones
2020-06-08 21:09                     ` Michael Walle
2020-06-09  6:47                       ` Lee Jones
2020-06-09 14:38                         ` Michael Walle
2020-06-09 14:42                           ` Mark Brown
2020-06-09 15:01                             ` Michael Walle
2020-06-09 17:15                               ` Rob Herring
2020-06-09 17:29                                 ` Mark Brown
2020-06-09 18:41                                 ` Lee Jones
2020-06-09 15:19                           ` Lee Jones
2020-06-09 15:30                             ` Michael Walle
2020-06-09 19:45                               ` Lee Jones
2020-06-10  7:10                                 ` Michael Walle
2020-06-10  7:19                                   ` Lee Jones
2020-06-10  7:49                                     ` Michael Walle
2020-06-10  7:56                                       ` Lee Jones
2020-06-10  9:27                                         ` Michael Walle
2020-06-10 18:30                                           ` Lee Jones
2020-06-10 17:16                                     ` Rob Herring
2020-06-10 18:02                                       ` Lee Jones
2020-06-08 18:20                 ` Lee Jones
2020-06-09 16:54               ` Rob Herring
2020-06-09 18:52                 ` Lee Jones
2020-06-05  8:01   ` Andy Shevchenko
2020-06-05  8:02     ` Andy Shevchenko
2020-06-05 10:09     ` Michael Walle
2020-06-05 10:48       ` Andy Shevchenko
2020-06-05 11:51         ` Michael Walle
2020-06-04 21:10 ` [PATCH v4 03/11] irqchip: add sl28cpld interrupt controller support Michael Walle
2020-06-05  1:26   ` kernel test robot
2020-06-05  8:07   ` Andy Shevchenko
2020-06-08 15:12   ` kernel test robot
2020-06-04 21:10 ` [PATCH v4 04/11] watchdog: add support for sl28cpld watchdog Michael Walle
2020-06-05  8:14   ` Andy Shevchenko
2020-06-05 10:24     ` Michael Walle
2020-06-05 10:50       ` Andy Shevchenko
2020-06-05 13:52         ` Guenter Roeck
2020-06-05 14:09           ` Andy Shevchenko
2020-06-05 15:05             ` Guenter Roeck
2020-06-05 16:04               ` Andy Shevchenko
2020-06-05 16:34                 ` Guenter Roeck
2020-06-04 21:10 ` [PATCH v4 05/11] pwm: add support for sl28cpld PWM controller Michael Walle
2020-06-05  8:15   ` Andy Shevchenko
2020-06-05  8:49   ` Lee Jones
2020-06-05  9:33     ` Andy Shevchenko
2020-06-05 11:39     ` Michael Walle
2020-06-05 18:17     ` Michael Walle
2020-06-08  7:46       ` Lee Jones
2020-06-04 21:10 ` [PATCH v4 06/11] gpio: add support for the sl28cpld GPIO controller Michael Walle
2020-06-05 12:00   ` Andy Shevchenko
2020-06-05 12:42     ` Michael Walle
2020-06-05 13:15       ` Andy Shevchenko
2020-06-05 18:44         ` Michael Walle
2020-06-05 21:19           ` Andy Shevchenko
2020-06-04 21:10 ` [PATCH v4 07/11] hwmon: add support for the sl28cpld hardware monitoring controller Michael Walle
2020-06-05 12:06   ` Andy Shevchenko
2020-06-04 21:10 ` [PATCH v4 08/11] arm64: dts: freescale: sl28: enable sl28cpld Michael Walle
2020-06-04 21:10 ` [PATCH v4 09/11] arm64: dts: freescale: sl28: map GPIOs to input events Michael Walle
2020-06-04 21:10 ` [PATCH v4 10/11] arm64: dts: freescale: sl28: enable LED support Michael Walle
2020-06-04 21:10 ` [PATCH v4 11/11] arm64: dts: freescale: sl28: enable fan support Michael Walle
2020-06-05  6:13 ` [PATCH v4 00/11] Add support for Kontron sl28cpld Lee Jones

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200604211039.12689-2-michael@walle.cc \
    --to=michael@walle.cc \
    --cc=andriy.shevchenko@linux.intel.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=jason@lakedaemon.net \
    --cc=jdelvare@suse.com \
    --cc=lee.jones@linaro.org \
    --cc=leoyang.li@nxp.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-hwmon@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=maz@kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    --cc=u.kleine-koenig@pengutronix.de \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org
	public-inbox-index linux-watchdog

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git