linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Guenter Roeck <linux@roeck-us.net>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>,
	linux-watchdog@vger.kernel.org, kernel@pengutronix.de,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v1 8/8] watchdog: f71808e_wdt: rename variant-independent identifiers appropriately
Date: Tue, 30 Jun 2020 14:29:27 -0700	[thread overview]
Message-ID: <20200630212927.GA24643@roeck-us.net> (raw)
In-Reply-To: <20200611191750.28096-9-a.fatoum@pengutronix.de>

On Thu, Jun 11, 2020 at 09:17:49PM +0200, Ahmad Fatoum wrote:
> Code for the common parts of the driver, either uses watchdog_ as
> prefix for the watchdog API or f71808e_ for everything else.
> 
> The driver now supports 9 more variants besides the f71808e,
> so let's rename the common parts to start with fintek_ instead.
> 
> This makes code browsing easier, because it's readily apparent whether a
> function is variant-specific or not. Also the watchdog_ namespace isn't
> used anymore for the driver-internal functions.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> Reported-by: kernel test robot <lkp@intel.com>
> ---
>  drivers/watchdog/f71808e_wdt.c | 98 +++++++++++++++++-----------------
>  1 file changed, 49 insertions(+), 49 deletions(-)
> 
> diff --git a/drivers/watchdog/f71808e_wdt.c b/drivers/watchdog/f71808e_wdt.c
> index 7c42cbf9912e..c866d05e8788 100644
> --- a/drivers/watchdog/f71808e_wdt.c
> +++ b/drivers/watchdog/f71808e_wdt.c
> @@ -114,18 +114,18 @@ static inline int superio_enter(int base);
>  static inline void superio_select(int base, int ld);
>  static inline void superio_exit(int base);
>  
> -struct watchdog_data;
> +struct fintek_wdog_data;
>  
> -struct f71808e_variant {
> +struct fintek_variant {
>  	u16 id;
>  	const char *wdt_name; /* NULL if chip lacks watchdog timer */
> -	void (*pinconf)(struct watchdog_data *wd);
> +	void (*pinconf)(struct fintek_wdog_data *wd);
>  };
>  
> -struct watchdog_data {
> +struct fintek_wdog_data {
>  	struct watchdog_device wdd;
>  	unsigned short	sioaddr;
> -	const struct f71808e_variant *variant;
> +	const struct fintek_variant *variant;
>  	struct watchdog_info ident;
>  
>  	u8		timer_val;	/* content for the wd_time register */
> @@ -134,7 +134,7 @@ struct watchdog_data {
>  	char		pulse_mode;	/* enable pulse output mode? */
>  };
>  
> -static inline bool has_f81865_wdo_conf(struct watchdog_data *wd)
> +static inline bool has_f81865_wdo_conf(struct fintek_wdog_data *wd)
>  {
>  	return wd->variant->id == SIO_F81865_ID
>  		|| wd->variant->id == SIO_F81866_ID;
> @@ -202,9 +202,9 @@ static inline void superio_exit(int base)
>  	release_region(base, 2);
>  }
>  
> -static int watchdog_set_timeout(struct watchdog_device *wdd, unsigned int new_timeout)
> +static int fintek_wdog_set_timeout(struct watchdog_device *wdd, unsigned int new_timeout)
>  {
> -	struct watchdog_data *wd = watchdog_get_drvdata(wdd);
> +	struct fintek_wdog_data *wd = watchdog_get_drvdata(wdd);
>  
>  	wdd->timeout = new_timeout;
>  	if (new_timeout > 0xff) {
> @@ -218,7 +218,7 @@ static int watchdog_set_timeout(struct watchdog_device *wdd, unsigned int new_ti
>  	return 0;
>  }
>  
> -static int watchdog_set_pulse_width(struct watchdog_data *wd, unsigned int pw)
> +static int fintek_wdog_set_pulse_width(struct fintek_wdog_data *wd, unsigned int pw)
>  {
>  	unsigned int t1 = 25, t2 = 125, t3 = 5000;
>  
> @@ -246,9 +246,9 @@ static int watchdog_set_pulse_width(struct watchdog_data *wd, unsigned int pw)
>  	return 0;
>  }
>  
> -static int watchdog_keepalive(struct watchdog_device *wdd)
> +static int fintek_wdog_keepalive(struct watchdog_device *wdd)
>  {
> -	struct watchdog_data *wd = watchdog_get_drvdata(wdd);
> +	struct fintek_wdog_data *wd = watchdog_get_drvdata(wdd);
>  	int err;
>  
>  	err = superio_enter(wd->sioaddr);
> @@ -274,13 +274,13 @@ static int watchdog_keepalive(struct watchdog_device *wdd)
>  	return 0;
>  }
>  
> -static int watchdog_start(struct watchdog_device *wdd)
> +static int fintek_wdog_start(struct watchdog_device *wdd)
>  {
> -	struct watchdog_data *wd = watchdog_get_drvdata(wdd);
> +	struct fintek_wdog_data *wd = watchdog_get_drvdata(wdd);
>  	int err;
>  
>  	/* Make sure we don't die as soon as the watchdog is enabled below */
> -	err = watchdog_keepalive(wdd);
> +	err = fintek_wdog_keepalive(wdd);
>  	if (err)
>  		return err;
>  
> @@ -328,9 +328,9 @@ static int watchdog_start(struct watchdog_device *wdd)
>  	return err;
>  }
>  
> -static int watchdog_stop(struct watchdog_device *wdd)
> +static int fintek_wdog_stop(struct watchdog_device *wdd)
>  {
> -	struct watchdog_data *wd = watchdog_get_drvdata(wdd);
> +	struct fintek_wdog_data *wd = watchdog_get_drvdata(wdd);
>  	int err;
>  
>  	err = superio_enter(wd->sioaddr);
> @@ -346,21 +346,21 @@ static int watchdog_stop(struct watchdog_device *wdd)
>  	return 0;
>  }
>  
> -static const struct watchdog_ops f71808e_wdog_ops = {
> +static const struct watchdog_ops fintek_wdog_ops = {
>  	.owner = THIS_MODULE,
> -	.start = watchdog_start,
> -	.stop = watchdog_stop,
> -	.ping = watchdog_keepalive,
> -	.set_timeout = watchdog_set_timeout,
> +	.start = fintek_wdog_start,
> +	.stop = fintek_wdog_stop,
> +	.ping = fintek_wdog_keepalive,
> +	.set_timeout = fintek_wdog_set_timeout,
>  };
>  
> -static bool watchdog_is_running(struct watchdog_data *wd, u8 wdt_conf)
> +static bool fintek_wdog_is_running(struct fintek_wdog_data *wd, u8 wdt_conf)
>  {
>  	return (superio_inb(wd->sioaddr, SIO_REG_ENABLE) & BIT(0))
>  		&& (wdt_conf & BIT(F71808FG_FLAG_WD_EN));
>  }
>  
> -static int __init watchdog_init(struct watchdog_data *wd)
> +static int __init fintek_wdog_init(struct fintek_wdog_data *wd)
>  {
>  	struct watchdog_device *wdd = &wd->wdd;
>  	int wdt_conf, err = 0;
> @@ -390,17 +390,17 @@ static int __init watchdog_init(struct watchdog_data *wd)
>  	superio_outb(wd->sioaddr, F71808FG_REG_WDT_CONF,
>  		     wdt_conf | BIT(F71808FG_FLAG_WDTMOUT_STS));
>  
> -	if (watchdog_is_running(wd, wdt_conf))
> +	if (fintek_wdog_is_running(wd, wdt_conf))
>  		set_bit(WDOG_HW_RUNNING, &wdd->status);
>  
>  	superio_exit(wd->sioaddr);
>  
> -	err = watchdog_set_pulse_width(wd, pulse_width);
> +	err = fintek_wdog_set_pulse_width(wd, pulse_width);
>  	if (err)
>  		return err;
>  
>  	wdd->info		= &wd->ident;
> -	wdd->ops		= &f71808e_wdog_ops;
> +	wdd->ops		= &fintek_wdog_ops;
>  	wdd->min_timeout	= 1;
>  	wdd->max_timeout	= max_timeout;
>  	wdd->timeout		= timeout;
> @@ -418,18 +418,18 @@ static int __init watchdog_init(struct watchdog_data *wd)
>  	 * WATCHDOG_HANDLE_BOOT_ENABLED can result in keepalive being directly
>  	 * called without a set_timeout before, so it needs to be done here once
>  	 */
> -	watchdog_set_timeout(wdd, wdd->timeout);
> +	fintek_wdog_set_timeout(wdd, wdd->timeout);
>  
>  	return watchdog_register_device(wdd);
>  }
>  
> -static void f71808fg_pinconf(struct watchdog_data *wd)
> +static void f71808fg_pinconf(struct fintek_wdog_data *wd)
>  {
>  	/* Set pin 21 to GPIO23/WDTRST#, then to WDTRST# */
>  	superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT2, 3);
>  	superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT3, 3);
>  }
> -static void f71862fg_pinconf(struct watchdog_data *wd)
> +static void f71862fg_pinconf(struct fintek_wdog_data *wd)
>  {
>  	if (f71862fg_pin == 63) {
>  		/* SPI must be disabled first to use this pin! */
> @@ -439,23 +439,23 @@ static void f71862fg_pinconf(struct watchdog_data *wd)
>  		superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT1, 1);
>  	}
>  }
> -static void f71868_pinconf(struct watchdog_data *wd)
> +static void f71868_pinconf(struct fintek_wdog_data *wd)
>  {
>  	/* GPIO14 --> WDTRST# */
>  	superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT1, 4);
>  }
> -static void f71882fg_pinconf(struct watchdog_data *wd)
> +static void f71882fg_pinconf(struct fintek_wdog_data *wd)
>  {
>  	/* Set pin 56 to WDTRST# */
>  	superio_set_bit(wd->sioaddr, SIO_REG_MFUNCT1, 1);
>  }
> -static void f71889fg_pinconf(struct watchdog_data *wd)
> +static void f71889fg_pinconf(struct fintek_wdog_data *wd)
>  {
>  	/* set pin 40 to WDTRST# */
>  	superio_outb(wd->sioaddr, SIO_REG_MFUNCT3,
>  		     superio_inb(wd->sioaddr, SIO_REG_MFUNCT3) & 0xcf);
>  }
> -static void f81803_pinconf(struct watchdog_data *wd)
> +static void f81803_pinconf(struct fintek_wdog_data *wd)
>  {
>  	/* Enable TSI Level register bank */
>  	superio_clear_bit(wd->sioaddr, SIO_REG_CLOCK_SEL, 3);
> @@ -463,12 +463,12 @@ static void f81803_pinconf(struct watchdog_data *wd)
>  	superio_outb(wd->sioaddr, SIO_REG_TSI_LEVEL_SEL, 0x5f &
>  		     superio_inb(wd->sioaddr, SIO_REG_TSI_LEVEL_SEL));
>  }
> -static void f81865_pinconf(struct watchdog_data *wd)
> +static void f81865_pinconf(struct fintek_wdog_data *wd)
>  {
>  	/* Set pin 70 to WDTRST# */
>  	superio_clear_bit(wd->sioaddr, SIO_REG_MFUNCT3, 5);
>  }
> -static void f81866_pinconf(struct watchdog_data *wd)
> +static void f81866_pinconf(struct fintek_wdog_data *wd)
>  {
>  	/*
>  	 * GPIO1 Control Register when 27h BIT3:2 = 01 & BIT0 = 0.
> @@ -484,7 +484,7 @@ static void f81866_pinconf(struct watchdog_data *wd)
>  	superio_clear_bit(wd->sioaddr, SIO_F81866_REG_GPIO1, 5);
>  }
>  
> -struct f71808e_variant f71808e_variants[] = {
> +struct fintek_variant fintek_variants[] = {

0-day has a point here. Granted, that is inherited, but still ...

>  	{ SIO_F71808_ID,  "f71808fg", f71808fg_pinconf },
>  	{ SIO_F71862_ID,  "f71862fg", f71862fg_pinconf },
>  	{ SIO_F71868_ID,  "f71868",   f71868_pinconf },
> @@ -500,9 +500,9 @@ struct f71808e_variant f71808e_variants[] = {
>  	{ /* sentinel */ }
>  };
>  
> -static struct f71808e_variant __init *f71808e_find(int sioaddr)
> +static struct fintek_variant __init *fintek_wdog_find(int sioaddr)
>  {
> -	struct f71808e_variant *variant;
> +	struct fintek_variant *variant;
>  	u16 devid;
>  	int err = superio_enter(sioaddr);
>  	if (err)
> @@ -516,7 +516,7 @@ static struct f71808e_variant __init *f71808e_find(int sioaddr)
>  	}
>  
>  	devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
> -	for (variant = f71808e_variants; variant->id; variant++) {
> +	for (variant = fintek_variants; variant->id; variant++) {
>  		if (variant->id == devid)
>  			break;
>  	}
> @@ -536,13 +536,13 @@ static struct f71808e_variant __init *f71808e_find(int sioaddr)
>  	return variant;
>  }
>  
> -static struct watchdog_data watchdog;
> +static struct fintek_wdog_data watchdog;
>  
> -static int __init f71808e_init(void)
> +static int __init fintek_wdog_probe(void)
>  {
> -	struct watchdog_data *wd = &watchdog;
> +	struct fintek_wdog_data *wd = &watchdog;
>  	static const unsigned short addrs[] = { 0x2e, 0x4e };
> -	struct f71808e_variant *variant;
> +	struct fintek_variant *variant;
>  	int i;
>  
>  	if (f71862fg_pin != 63 && f71862fg_pin != 56) {
> @@ -551,7 +551,7 @@ static int __init f71808e_init(void)
>  	}
>  
>  	for (i = 0; i < ARRAY_SIZE(addrs); i++) {
> -		variant = f71808e_find(addrs[i]);
> +		variant = fintek_wdog_find(addrs[i]);
>  		if (!IS_ERR(variant))
>  			break;
>  	}
> @@ -561,17 +561,17 @@ static int __init f71808e_init(void)
>  	wd->variant = variant;
>  	wd->sioaddr = addrs[i];
>  
> -	return watchdog_init(wd);
> +	return fintek_wdog_init(wd);
>  }
>  
> -static void __exit f71808e_exit(void)
> +static void __exit fintek_wdog_exit(void)
>  {
>  	watchdog_unregister_device(&watchdog.wdd);
>  }
>  
> -MODULE_DESCRIPTION("F71808E Watchdog Driver");
> +MODULE_DESCRIPTION("Fintek F71808E Watchdog Driver");
>  MODULE_AUTHOR("Giel van Schijndel <me@mortis.eu>");
>  MODULE_LICENSE("GPL");
>  
> -module_init(f71808e_init);
> -module_exit(f71808e_exit);
> +module_init(fintek_wdog_probe);
> +module_exit(fintek_wdog_exit);

  parent reply	other threads:[~2020-06-30 21:29 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-11 19:17 [PATCH v1 0/8] watchdog: f71808e_wdt: migrate to kernel Ahmad Fatoum
2020-06-11 19:17 ` [PATCH v1 1/8] docs: watchdog: codify ident.options as superset of possible status flags Ahmad Fatoum
2020-06-30 20:49   ` Guenter Roeck
2020-06-11 19:17 ` [PATCH v1 2/8] watchdog: f71808e_wdt: indicate WDIOF_CARDRESET support in watchdog_info.options Ahmad Fatoum
2020-06-30 20:51   ` Guenter Roeck
2020-06-11 19:17 ` [PATCH v1 3/8] watchdog: f71808e_wdt: remove use of wrong watchdog_info option Ahmad Fatoum
2020-06-30 21:07   ` Guenter Roeck
2020-06-11 19:17 ` [PATCH v1 4/8] watchdog: f71808e_wdt: clear watchdog timeout occurred flag Ahmad Fatoum
2020-06-30 21:09   ` Guenter Roeck
2020-06-11 19:17 ` [PATCH v1 5/8] watchdog: f71808e_wdt: do stricter parameter validation Ahmad Fatoum
2020-06-30 21:11   ` Guenter Roeck
2020-06-11 19:17 ` [PATCH v1 6/8] watchdog: f71808e_wdt: consolidate variant handling into single array Ahmad Fatoum
2020-06-30 21:18   ` Guenter Roeck
2020-06-11 19:17 ` [PATCH v1 7/8] watchdog: f71808e_wdt: migrate to new kernel watchdog API Ahmad Fatoum
2020-06-30 21:26   ` Guenter Roeck
2020-06-11 19:17 ` [PATCH v1 8/8] watchdog: f71808e_wdt: rename variant-independent identifiers appropriately Ahmad Fatoum
2020-06-12  4:57   ` kernel test robot
2020-06-12  4:57   ` [RFC PATCH] watchdog: f71808e_wdt: fintek_variants[] can be static kernel test robot
2020-06-30 21:29   ` Guenter Roeck [this message]
2020-07-13  8:59     ` [PATCH v1 8/8] watchdog: f71808e_wdt: rename variant-independent identifiers appropriately Ahmad Fatoum

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200630212927.GA24643@roeck-us.net \
    --to=linux@roeck-us.net \
    --cc=a.fatoum@pengutronix.de \
    --cc=kernel@pengutronix.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).