Linux-Watchdog Archive on lore.kernel.org
 help / color / Atom feed
* [PATCH V3 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations
@ 2020-07-30  2:03 Anson Huang
  2020-07-30  2:03 ` [PATCH V3 2/2] watchdog: imx7ulp: Watchdog should continue running for wait/stop mode Anson Huang
  2020-07-30 16:52 ` [PATCH V3 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations Guenter Roeck
  0 siblings, 2 replies; 5+ messages in thread
From: Anson Huang @ 2020-07-30  2:03 UTC (permalink / raw)
  To: wim, linux, shawnguo, s.hauer, kernel, festevam, linux-watchdog,
	linux-arm-kernel, linux-kernel
  Cc: Linux-imx

According to reference manual, the i.MX7ULP WDOG's operations except
refresh should follow below sequence:

1. disable global interrupts;
2. unlock the wdog and wait unlock bit set;
3. reconfigure the wdog and wait for reconfiguration bit set;
4. enabel global interrupts.

Strictly follow the recommended sequence can make it more robust.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
changes since V2:
	- change the wait timeout to 20us according to experiment;
	- drop WARN_ON when timeout, and check its return value in each caller for
	  unlock wait, no need to handle the return value for reconfiguration.
---
 drivers/watchdog/imx7ulp_wdt.c | 74 ++++++++++++++++++++++++++++++++++--------
 1 file changed, 61 insertions(+), 13 deletions(-)

diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c
index 7993c8c..010ddd1 100644
--- a/drivers/watchdog/imx7ulp_wdt.c
+++ b/drivers/watchdog/imx7ulp_wdt.c
@@ -5,6 +5,7 @@
 
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -36,6 +37,7 @@
 #define DEFAULT_TIMEOUT	60
 #define MAX_TIMEOUT	128
 #define WDOG_CLOCK_RATE	1000
+#define WDOG_WAIT_TIMEOUT	20
 
 static bool nowayout = WATCHDOG_NOWAYOUT;
 module_param(nowayout, bool, 0000);
@@ -48,17 +50,40 @@ struct imx7ulp_wdt_device {
 	struct clk *clk;
 };
 
-static void imx7ulp_wdt_enable(struct watchdog_device *wdog, bool enable)
+static int imx7ulp_wdt_wait(void __iomem *base, u32 mask)
+{
+	u32 val = readl(base + WDOG_CS);
+
+	if (!(val & mask) && readl_poll_timeout_atomic(base + WDOG_CS, val,
+						       val & mask, 0,
+						       WDOG_WAIT_TIMEOUT))
+		return -ETIMEDOUT;
+
+	return 0;
+}
+
+static int imx7ulp_wdt_enable(struct watchdog_device *wdog, bool enable)
 {
 	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
 
 	u32 val = readl(wdt->base + WDOG_CS);
+	int ret;
 
+	local_irq_disable();
 	writel(UNLOCK, wdt->base + WDOG_CNT);
+	ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK);
+	if (ret)
+		goto enable_out;
 	if (enable)
 		writel(val | WDOG_CS_EN, wdt->base + WDOG_CS);
 	else
 		writel(val & ~WDOG_CS_EN, wdt->base + WDOG_CS);
+	imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS);
+
+enable_out:
+	local_irq_enable();
+
+	return ret;
 }
 
 static bool imx7ulp_wdt_is_enabled(void __iomem *base)
@@ -79,17 +104,12 @@ static int imx7ulp_wdt_ping(struct watchdog_device *wdog)
 
 static int imx7ulp_wdt_start(struct watchdog_device *wdog)
 {
-
-	imx7ulp_wdt_enable(wdog, true);
-
-	return 0;
+	return imx7ulp_wdt_enable(wdog, true);
 }
 
 static int imx7ulp_wdt_stop(struct watchdog_device *wdog)
 {
-	imx7ulp_wdt_enable(wdog, false);
-
-	return 0;
+	return imx7ulp_wdt_enable(wdog, false);
 }
 
 static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog,
@@ -97,22 +117,37 @@ static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog,
 {
 	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
 	u32 val = WDOG_CLOCK_RATE * timeout;
+	int ret;
 
+	local_irq_disable();
 	writel(UNLOCK, wdt->base + WDOG_CNT);
+	ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK);
+	if (ret)
+		goto timeout_out;
 	writel(val, wdt->base + WDOG_TOVAL);
+	imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS);
+
+timeout_out:
+	local_irq_enable();
 
 	wdog->timeout = timeout;
 
-	return 0;
+	return ret;
 }
 
 static int imx7ulp_wdt_restart(struct watchdog_device *wdog,
 			       unsigned long action, void *data)
 {
 	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
+	int ret;
+
+	ret = imx7ulp_wdt_enable(wdog, true);
+	if (ret)
+		return ret;
 
-	imx7ulp_wdt_enable(wdog, true);
-	imx7ulp_wdt_set_timeout(&wdt->wdd, 1);
+	ret = imx7ulp_wdt_set_timeout(&wdt->wdd, 1);
+	if (ret)
+		return ret;
 
 	/* wait for wdog to fire */
 	while (true)
@@ -136,19 +171,30 @@ static const struct watchdog_info imx7ulp_wdt_info = {
 		    WDIOF_MAGICCLOSE,
 };
 
-static void imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
+static int imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
 {
 	u32 val;
+	int ret;
 
+	local_irq_disable();
 	/* unlock the wdog for reconfiguration */
 	writel_relaxed(UNLOCK_SEQ0, base + WDOG_CNT);
 	writel_relaxed(UNLOCK_SEQ1, base + WDOG_CNT);
+	ret = imx7ulp_wdt_wait(base, WDOG_CS_ULK);
+	if (ret)
+		goto init_out;
 
 	/* set an initial timeout value in TOVAL */
 	writel(timeout, base + WDOG_TOVAL);
 	/* enable 32bit command sequence and reconfigure */
 	val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE;
 	writel(val, base + WDOG_CS);
+	imx7ulp_wdt_wait(base, WDOG_CS_RCS);
+
+init_out:
+	local_irq_enable();
+
+	return ret;
 }
 
 static void imx7ulp_wdt_action(void *data)
@@ -199,7 +245,9 @@ static int imx7ulp_wdt_probe(struct platform_device *pdev)
 	watchdog_stop_on_reboot(wdog);
 	watchdog_stop_on_unregister(wdog);
 	watchdog_set_drvdata(wdog, imx7ulp_wdt);
-	imx7ulp_wdt_init(imx7ulp_wdt->base, wdog->timeout * WDOG_CLOCK_RATE);
+	ret = imx7ulp_wdt_init(imx7ulp_wdt->base, wdog->timeout * WDOG_CLOCK_RATE);
+	if (ret)
+		return ret;
 
 	return devm_watchdog_register_device(dev, wdog);
 }
-- 
2.7.4


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [PATCH V3 2/2] watchdog: imx7ulp: Watchdog should continue running for wait/stop mode
  2020-07-30  2:03 [PATCH V3 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations Anson Huang
@ 2020-07-30  2:03 ` Anson Huang
  2020-07-30 16:53   ` Guenter Roeck
  2020-07-30 16:52 ` [PATCH V3 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations Guenter Roeck
  1 sibling, 1 reply; 5+ messages in thread
From: Anson Huang @ 2020-07-30  2:03 UTC (permalink / raw)
  To: wim, linux, shawnguo, s.hauer, kernel, festevam, linux-watchdog,
	linux-arm-kernel, linux-kernel
  Cc: Linux-imx

When kernel idle, system will enter wait/stop mode, wdog should continue
running in this scenario, and the refresh thread can wake up system from
wait/stop mode.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
no change.
---
 drivers/watchdog/imx7ulp_wdt.c | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c
index 010ddd1..77773b0 100644
--- a/drivers/watchdog/imx7ulp_wdt.c
+++ b/drivers/watchdog/imx7ulp_wdt.c
@@ -22,6 +22,8 @@
 #define WDOG_CS_CLK		(LPO_CLK << LPO_CLK_SHIFT)
 #define WDOG_CS_EN		BIT(7)
 #define WDOG_CS_UPDATE		BIT(5)
+#define WDOG_CS_WAIT		BIT(1)
+#define WDOG_CS_STOP		BIT(0)
 
 #define WDOG_CNT	0x4
 #define WDOG_TOVAL	0x8
@@ -187,7 +189,8 @@ static int imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
 	/* set an initial timeout value in TOVAL */
 	writel(timeout, base + WDOG_TOVAL);
 	/* enable 32bit command sequence and reconfigure */
-	val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE;
+	val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE |
+	      WDOG_CS_WAIT | WDOG_CS_STOP;
 	writel(val, base + WDOG_CS);
 	imx7ulp_wdt_wait(base, WDOG_CS_RCS);
 
-- 
2.7.4


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH V3 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations
  2020-07-30  2:03 [PATCH V3 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations Anson Huang
  2020-07-30  2:03 ` [PATCH V3 2/2] watchdog: imx7ulp: Watchdog should continue running for wait/stop mode Anson Huang
@ 2020-07-30 16:52 ` Guenter Roeck
  2020-07-30 22:48   ` Anson Huang
  1 sibling, 1 reply; 5+ messages in thread
From: Guenter Roeck @ 2020-07-30 16:52 UTC (permalink / raw)
  To: Anson Huang
  Cc: wim, shawnguo, s.hauer, kernel, festevam, linux-watchdog,
	linux-arm-kernel, linux-kernel, Linux-imx

On Thu, Jul 30, 2020 at 10:03:10AM +0800, Anson Huang wrote:
> According to reference manual, the i.MX7ULP WDOG's operations except
> refresh should follow below sequence:
> 
> 1. disable global interrupts;
> 2. unlock the wdog and wait unlock bit set;
> 3. reconfigure the wdog and wait for reconfiguration bit set;
> 4. enabel global interrupts.
> 
> Strictly follow the recommended sequence can make it more robust.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> changes since V2:
> 	- change the wait timeout to 20us according to experiment;
> 	- drop WARN_ON when timeout, and check its return value in each caller for
> 	  unlock wait, no need to handle the return value for reconfiguration.
> ---
>  drivers/watchdog/imx7ulp_wdt.c | 74 ++++++++++++++++++++++++++++++++++--------
>  1 file changed, 61 insertions(+), 13 deletions(-)
> 
> diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c
> index 7993c8c..010ddd1 100644
> --- a/drivers/watchdog/imx7ulp_wdt.c
> +++ b/drivers/watchdog/imx7ulp_wdt.c
> @@ -5,6 +5,7 @@
>  
>  #include <linux/clk.h>
>  #include <linux/io.h>
> +#include <linux/iopoll.h>
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
> @@ -36,6 +37,7 @@
>  #define DEFAULT_TIMEOUT	60
>  #define MAX_TIMEOUT	128
>  #define WDOG_CLOCK_RATE	1000
> +#define WDOG_WAIT_TIMEOUT	20
>  
>  static bool nowayout = WATCHDOG_NOWAYOUT;
>  module_param(nowayout, bool, 0000);
> @@ -48,17 +50,40 @@ struct imx7ulp_wdt_device {
>  	struct clk *clk;
>  };
>  
> -static void imx7ulp_wdt_enable(struct watchdog_device *wdog, bool enable)
> +static int imx7ulp_wdt_wait(void __iomem *base, u32 mask)
> +{
> +	u32 val = readl(base + WDOG_CS);
> +
> +	if (!(val & mask) && readl_poll_timeout_atomic(base + WDOG_CS, val,
> +						       val & mask, 0,
> +						       WDOG_WAIT_TIMEOUT))
> +		return -ETIMEDOUT;
> +
> +	return 0;
> +}
> +
> +static int imx7ulp_wdt_enable(struct watchdog_device *wdog, bool enable)
>  {
>  	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
>  
>  	u32 val = readl(wdt->base + WDOG_CS);
> +	int ret;
>  
> +	local_irq_disable();
>  	writel(UNLOCK, wdt->base + WDOG_CNT);
> +	ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK);
> +	if (ret)
> +		goto enable_out;
>  	if (enable)
>  		writel(val | WDOG_CS_EN, wdt->base + WDOG_CS);
>  	else
>  		writel(val & ~WDOG_CS_EN, wdt->base + WDOG_CS);
> +	imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS);
> +
> +enable_out:
> +	local_irq_enable();
> +
> +	return ret;
>  }
>  
>  static bool imx7ulp_wdt_is_enabled(void __iomem *base)
> @@ -79,17 +104,12 @@ static int imx7ulp_wdt_ping(struct watchdog_device *wdog)
>  
>  static int imx7ulp_wdt_start(struct watchdog_device *wdog)
>  {
> -
> -	imx7ulp_wdt_enable(wdog, true);
> -
> -	return 0;
> +	return imx7ulp_wdt_enable(wdog, true);
>  }
>  
>  static int imx7ulp_wdt_stop(struct watchdog_device *wdog)
>  {
> -	imx7ulp_wdt_enable(wdog, false);
> -
> -	return 0;
> +	return imx7ulp_wdt_enable(wdog, false);
>  }
>  
>  static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog,
> @@ -97,22 +117,37 @@ static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog,
>  {
>  	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
>  	u32 val = WDOG_CLOCK_RATE * timeout;
> +	int ret;
>  
> +	local_irq_disable();
>  	writel(UNLOCK, wdt->base + WDOG_CNT);
> +	ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK);
> +	if (ret)
> +		goto timeout_out;
>  	writel(val, wdt->base + WDOG_TOVAL);
> +	imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS);
> +
> +timeout_out:
> +	local_irq_enable();
>  
>  	wdog->timeout = timeout;

This needs to be moved up - the timeout did not get changed on error.

Guenter

>  
> -	return 0;
> +	return ret;
>  }
>  
>  static int imx7ulp_wdt_restart(struct watchdog_device *wdog,
>  			       unsigned long action, void *data)
>  {
>  	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
> +	int ret;
> +
> +	ret = imx7ulp_wdt_enable(wdog, true);
> +	if (ret)
> +		return ret;
>  
> -	imx7ulp_wdt_enable(wdog, true);
> -	imx7ulp_wdt_set_timeout(&wdt->wdd, 1);
> +	ret = imx7ulp_wdt_set_timeout(&wdt->wdd, 1);
> +	if (ret)
> +		return ret;
>  
>  	/* wait for wdog to fire */
>  	while (true)
> @@ -136,19 +171,30 @@ static const struct watchdog_info imx7ulp_wdt_info = {
>  		    WDIOF_MAGICCLOSE,
>  };
>  
> -static void imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
> +static int imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
>  {
>  	u32 val;
> +	int ret;
>  
> +	local_irq_disable();
>  	/* unlock the wdog for reconfiguration */
>  	writel_relaxed(UNLOCK_SEQ0, base + WDOG_CNT);
>  	writel_relaxed(UNLOCK_SEQ1, base + WDOG_CNT);
> +	ret = imx7ulp_wdt_wait(base, WDOG_CS_ULK);
> +	if (ret)
> +		goto init_out;
>  
>  	/* set an initial timeout value in TOVAL */
>  	writel(timeout, base + WDOG_TOVAL);
>  	/* enable 32bit command sequence and reconfigure */
>  	val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE;
>  	writel(val, base + WDOG_CS);
> +	imx7ulp_wdt_wait(base, WDOG_CS_RCS);
> +
> +init_out:
> +	local_irq_enable();
> +
> +	return ret;
>  }
>  
>  static void imx7ulp_wdt_action(void *data)
> @@ -199,7 +245,9 @@ static int imx7ulp_wdt_probe(struct platform_device *pdev)
>  	watchdog_stop_on_reboot(wdog);
>  	watchdog_stop_on_unregister(wdog);
>  	watchdog_set_drvdata(wdog, imx7ulp_wdt);
> -	imx7ulp_wdt_init(imx7ulp_wdt->base, wdog->timeout * WDOG_CLOCK_RATE);
> +	ret = imx7ulp_wdt_init(imx7ulp_wdt->base, wdog->timeout * WDOG_CLOCK_RATE);
> +	if (ret)
> +		return ret;
>  
>  	return devm_watchdog_register_device(dev, wdog);
>  }
> -- 
> 2.7.4
> 

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH V3 2/2] watchdog: imx7ulp: Watchdog should continue running for wait/stop mode
  2020-07-30  2:03 ` [PATCH V3 2/2] watchdog: imx7ulp: Watchdog should continue running for wait/stop mode Anson Huang
@ 2020-07-30 16:53   ` Guenter Roeck
  0 siblings, 0 replies; 5+ messages in thread
From: Guenter Roeck @ 2020-07-30 16:53 UTC (permalink / raw)
  To: Anson Huang
  Cc: wim, shawnguo, s.hauer, kernel, festevam, linux-watchdog,
	linux-arm-kernel, linux-kernel, Linux-imx

On Thu, Jul 30, 2020 at 10:03:11AM +0800, Anson Huang wrote:
> When kernel idle, system will enter wait/stop mode, wdog should continue
> running in this scenario, and the refresh thread can wake up system from
> wait/stop mode.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
> no change.
> ---
>  drivers/watchdog/imx7ulp_wdt.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/watchdog/imx7ulp_wdt.c b/drivers/watchdog/imx7ulp_wdt.c
> index 010ddd1..77773b0 100644
> --- a/drivers/watchdog/imx7ulp_wdt.c
> +++ b/drivers/watchdog/imx7ulp_wdt.c
> @@ -22,6 +22,8 @@
>  #define WDOG_CS_CLK		(LPO_CLK << LPO_CLK_SHIFT)
>  #define WDOG_CS_EN		BIT(7)
>  #define WDOG_CS_UPDATE		BIT(5)
> +#define WDOG_CS_WAIT		BIT(1)
> +#define WDOG_CS_STOP		BIT(0)
>  
>  #define WDOG_CNT	0x4
>  #define WDOG_TOVAL	0x8
> @@ -187,7 +189,8 @@ static int imx7ulp_wdt_init(void __iomem *base, unsigned int timeout)
>  	/* set an initial timeout value in TOVAL */
>  	writel(timeout, base + WDOG_TOVAL);
>  	/* enable 32bit command sequence and reconfigure */
> -	val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE;
> +	val = WDOG_CS_CMD32EN | WDOG_CS_CLK | WDOG_CS_UPDATE |
> +	      WDOG_CS_WAIT | WDOG_CS_STOP;
>  	writel(val, base + WDOG_CS);
>  	imx7ulp_wdt_wait(base, WDOG_CS_RCS);
>  
> -- 
> 2.7.4
> 

^ permalink raw reply	[flat|nested] 5+ messages in thread

* RE: [PATCH V3 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations
  2020-07-30 16:52 ` [PATCH V3 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations Guenter Roeck
@ 2020-07-30 22:48   ` Anson Huang
  0 siblings, 0 replies; 5+ messages in thread
From: Anson Huang @ 2020-07-30 22:48 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: wim, shawnguo, s.hauer, kernel, festevam, linux-watchdog,
	linux-arm-kernel, linux-kernel, dl-linux-imx

Hi, Guenter


> Subject: Re: [PATCH V3 1/2] watchdog: imx7ulp: Strictly follow the sequence
> for wdog operations
> 
> On Thu, Jul 30, 2020 at 10:03:10AM +0800, Anson Huang wrote:
> > According to reference manual, the i.MX7ULP WDOG's operations except
> > refresh should follow below sequence:
> >
> > 1. disable global interrupts;
> > 2. unlock the wdog and wait unlock bit set; 3. reconfigure the wdog
> > and wait for reconfiguration bit set; 4. enabel global interrupts.
> >
> > Strictly follow the recommended sequence can make it more robust.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> > ---
> > changes since V2:
> > 	- change the wait timeout to 20us according to experiment;
> > 	- drop WARN_ON when timeout, and check its return value in each caller
> for
> > 	  unlock wait, no need to handle the return value for reconfiguration.
> > ---
> >  drivers/watchdog/imx7ulp_wdt.c | 74
> > ++++++++++++++++++++++++++++++++++--------
> >  1 file changed, 61 insertions(+), 13 deletions(-)
> >
> > diff --git a/drivers/watchdog/imx7ulp_wdt.c
> > b/drivers/watchdog/imx7ulp_wdt.c index 7993c8c..010ddd1 100644
> > --- a/drivers/watchdog/imx7ulp_wdt.c
> > +++ b/drivers/watchdog/imx7ulp_wdt.c
> > @@ -5,6 +5,7 @@
> >
> >  #include <linux/clk.h>
> >  #include <linux/io.h>
> > +#include <linux/iopoll.h>
> >  #include <linux/kernel.h>
> >  #include <linux/module.h>
> >  #include <linux/of.h>
> > @@ -36,6 +37,7 @@
> >  #define DEFAULT_TIMEOUT	60
> >  #define MAX_TIMEOUT	128
> >  #define WDOG_CLOCK_RATE	1000
> > +#define WDOG_WAIT_TIMEOUT	20
> >
> >  static bool nowayout = WATCHDOG_NOWAYOUT;
> module_param(nowayout,
> > bool, 0000); @@ -48,17 +50,40 @@ struct imx7ulp_wdt_device {
> >  	struct clk *clk;
> >  };
> >
> > -static void imx7ulp_wdt_enable(struct watchdog_device *wdog, bool
> > enable)
> > +static int imx7ulp_wdt_wait(void __iomem *base, u32 mask) {
> > +	u32 val = readl(base + WDOG_CS);
> > +
> > +	if (!(val & mask) && readl_poll_timeout_atomic(base + WDOG_CS, val,
> > +						       val & mask, 0,
> > +						       WDOG_WAIT_TIMEOUT))
> > +		return -ETIMEDOUT;
> > +
> > +	return 0;
> > +}
> > +
> > +static int imx7ulp_wdt_enable(struct watchdog_device *wdog, bool
> > +enable)
> >  {
> >  	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
> >
> >  	u32 val = readl(wdt->base + WDOG_CS);
> > +	int ret;
> >
> > +	local_irq_disable();
> >  	writel(UNLOCK, wdt->base + WDOG_CNT);
> > +	ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK);
> > +	if (ret)
> > +		goto enable_out;
> >  	if (enable)
> >  		writel(val | WDOG_CS_EN, wdt->base + WDOG_CS);
> >  	else
> >  		writel(val & ~WDOG_CS_EN, wdt->base + WDOG_CS);
> > +	imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS);
> > +
> > +enable_out:
> > +	local_irq_enable();
> > +
> > +	return ret;
> >  }
> >
> >  static bool imx7ulp_wdt_is_enabled(void __iomem *base) @@ -79,17
> > +104,12 @@ static int imx7ulp_wdt_ping(struct watchdog_device *wdog)
> >
> >  static int imx7ulp_wdt_start(struct watchdog_device *wdog)  {
> > -
> > -	imx7ulp_wdt_enable(wdog, true);
> > -
> > -	return 0;
> > +	return imx7ulp_wdt_enable(wdog, true);
> >  }
> >
> >  static int imx7ulp_wdt_stop(struct watchdog_device *wdog)  {
> > -	imx7ulp_wdt_enable(wdog, false);
> > -
> > -	return 0;
> > +	return imx7ulp_wdt_enable(wdog, false);
> >  }
> >
> >  static int imx7ulp_wdt_set_timeout(struct watchdog_device *wdog, @@
> > -97,22 +117,37 @@ static int imx7ulp_wdt_set_timeout(struct
> > watchdog_device *wdog,  {
> >  	struct imx7ulp_wdt_device *wdt = watchdog_get_drvdata(wdog);
> >  	u32 val = WDOG_CLOCK_RATE * timeout;
> > +	int ret;
> >
> > +	local_irq_disable();
> >  	writel(UNLOCK, wdt->base + WDOG_CNT);
> > +	ret = imx7ulp_wdt_wait(wdt->base, WDOG_CS_ULK);
> > +	if (ret)
> > +		goto timeout_out;
> >  	writel(val, wdt->base + WDOG_TOVAL);
> > +	imx7ulp_wdt_wait(wdt->base, WDOG_CS_RCS);
> > +
> > +timeout_out:
> > +	local_irq_enable();
> >
> >  	wdog->timeout = timeout;
> 
> This needs to be moved up - the timeout did not get changed on error.

Ah, yes, will fix it in V4.

Thanks,
Anson



^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-30  2:03 [PATCH V3 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations Anson Huang
2020-07-30  2:03 ` [PATCH V3 2/2] watchdog: imx7ulp: Watchdog should continue running for wait/stop mode Anson Huang
2020-07-30 16:53   ` Guenter Roeck
2020-07-30 16:52 ` [PATCH V3 1/2] watchdog: imx7ulp: Strictly follow the sequence for wdog operations Guenter Roeck
2020-07-30 22:48   ` Anson Huang

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org
	public-inbox-index linux-watchdog

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git