* [PATCH v6 1/6] MAINTAINERS: Add Advantech AHC1EC0 embedded controller entry
@ 2021-01-18 12:37 Campion Kang
2021-01-18 12:37 ` [PATCH v6 2/6] mfd: ahc1ec0: Add Advantech EC include file used by dt-bindings Campion Kang
` (4 more replies)
0 siblings, 5 replies; 20+ messages in thread
From: Campion Kang @ 2021-01-18 12:37 UTC (permalink / raw)
To: Lee Jones, Rob Herring, linux-kernel, devicetree, Jean Delvare,
Guenter Roeck, Wim Van Sebroeck, linux-hwmon, linux-watchdog,
AceLan Kao, Campion Kang
Add Advantech AHC1EC0 embedded controller entry
Changed since V5:
- add include/linux/mfd/ahc1ec0.h
Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
---
MAINTAINERS | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 00836f6452f0..e1ccdaadb5ee 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -562,6 +562,17 @@ S: Maintained
F: Documentation/scsi/advansys.rst
F: drivers/scsi/advansys.c
+ADVANTECH AHC1EC0 EMBEDDED CONTROLLER DRIVER
+M: Campion Kang <campion.kang@advantech.com.tw>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/mfd/ahc1ec0.yaml
+F: drivers/hwmon/ahc1ec0-hwmon.c
+F: drivers/mfd/ahc1ec0.c
+F: drivers/watchdog/ahc1ec0-wdt.c
+F: include/dt-bindings/mfd/ahc1ec0-dt.h
+F: include/linux/mfd/ahc1ec0.h
+
ADXL34X THREE-AXIS DIGITAL ACCELEROMETER DRIVER (ADXL345/ADXL346)
M: Michael Hennerich <michael.hennerich@analog.com>
S: Supported
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v6 2/6] mfd: ahc1ec0: Add Advantech EC include file used by dt-bindings
2021-01-18 12:37 [PATCH v6 1/6] MAINTAINERS: Add Advantech AHC1EC0 embedded controller entry Campion Kang
@ 2021-01-18 12:37 ` Campion Kang
2021-02-04 10:32 ` Lee Jones
2021-01-18 12:37 ` [PATCH v6 3/6] dt-bindings: mfd: ahc1ec0.yaml: Add Advantech embedded controller - AHC1EC0 Campion Kang
` (3 subsequent siblings)
4 siblings, 1 reply; 20+ messages in thread
From: Campion Kang @ 2021-01-18 12:37 UTC (permalink / raw)
To: Lee Jones, Rob Herring, linux-kernel, devicetree, Jean Delvare,
Guenter Roeck, Wim Van Sebroeck, linux-hwmon, linux-watchdog,
AceLan Kao, Campion Kang
This files defines the sud-device types and hwmon profiles support by
Advantech embedded controller.
Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
---
include/dt-bindings/mfd/ahc1ec0-dt.h | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 include/dt-bindings/mfd/ahc1ec0-dt.h
diff --git a/include/dt-bindings/mfd/ahc1ec0-dt.h b/include/dt-bindings/mfd/ahc1ec0-dt.h
new file mode 100644
index 000000000000..389a7a7f8f02
--- /dev/null
+++ b/include/dt-bindings/mfd/ahc1ec0-dt.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Device Tree defines for Advantech Embedded Controller (AHC1EC0)
+ */
+
+#ifndef _DT_BINDINGS_MFD_AHC1EC0_H
+#define _DT_BINDINGS_MFD_AHC1EC0_H
+
+/* Sub-device Definitions */
+#define AHC1EC0_SUBDEV_BRIGHTNESS 0x0
+#define AHC1EC0_SUBDEV_EEPROM 0x1
+#define AHC1EC0_SUBDEV_GPIO 0x2
+#define AHC1EC0_SUBDEV_HWMON 0x3
+#define AHC1EC0_SUBDEV_LED 0x4
+#define AHC1EC0_SUBDEV_WDT 0x5
+
+/* HWMON Profile Definitions */
+#define AHC1EC0_HWMON_PRO_TEMPLATE 0x0
+#define AHC1EC0_HWMON_PRO_TPC5XXX 0x1
+#define AHC1EC0_HWMON_PRO_PRVR4 0x2
+#define AHC1EC0_HWMON_PRO_UNO2271G 0x3
+#define AHC1EC0_HWMON_PRO_UNO1172A 0x4
+#define AHC1EC0_HWMON_PRO_UNO1372G 0x5
+
+#endif /* _DT_BINDINGS_MFD_AHC1EC0_H */
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v6 3/6] dt-bindings: mfd: ahc1ec0.yaml: Add Advantech embedded controller - AHC1EC0
2021-01-18 12:37 [PATCH v6 1/6] MAINTAINERS: Add Advantech AHC1EC0 embedded controller entry Campion Kang
2021-01-18 12:37 ` [PATCH v6 2/6] mfd: ahc1ec0: Add Advantech EC include file used by dt-bindings Campion Kang
@ 2021-01-18 12:37 ` Campion Kang
2021-02-05 21:21 ` Rob Herring
2021-01-18 12:37 ` [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller Campion Kang
` (2 subsequent siblings)
4 siblings, 1 reply; 20+ messages in thread
From: Campion Kang @ 2021-01-18 12:37 UTC (permalink / raw)
To: Lee Jones, Rob Herring, linux-kernel, devicetree, Jean Delvare,
Guenter Roeck, Wim Van Sebroeck, linux-hwmon, linux-watchdog,
AceLan Kao, Campion Kang
Add DT binding schema for Advantech embedded controller AHC1EC0.
Changed since V5:
- rename dt-bindings/mfd/ahc1ec0.h to dt-bindings/mfd/ahc1ec0-dt.h
that found errors by bot 'make dt_binding_check'
Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
---
.../devicetree/bindings/mfd/ahc1ec0.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/ahc1ec0.yaml
diff --git a/Documentation/devicetree/bindings/mfd/ahc1ec0.yaml b/Documentation/devicetree/bindings/mfd/ahc1ec0.yaml
new file mode 100644
index 000000000000..40af14bb9c0a
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ahc1ec0.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ahc1ec0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Advantech Embedded Controller (AHC1EC0)
+
+maintainers:
+ - Campion Kang <campion.kang@advantech.com.tw>
+
+description: |
+ AHC1EC0 is one of the embedded controllers used by Advantech to provide several
+ functions such as watchdog, hwmon, brightness, etc. Advantech related applications
+ can control the whole system via these functions.
+
+properties:
+ compatible:
+ const: advantech,ahc1ec0
+
+ advantech,sub-dev-nb:
+ description:
+ The number of sub-devices specified in the platform.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
+
+ advantech,sub-dev:
+ description:
+ A list of the sub-devices supported in the platform. Defines for the
+ appropriate values can found in dt-bindings/mfd/ahc1ec0-dt.h.
+ $ref: "/schemas/types.yaml#/definitions/uint32-array"
+ minItems: 1
+ maxItems: 6
+
+ advantech,hwmon-profile:
+ description:
+ The number of sub-devices specified in the platform. Defines for the
+ hwmon profiles can found in dt-bindings/mfd/ahc1ec0-dt.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ maxItems: 1
+
+required:
+ - compatible
+ - advantech,sub-dev-nb
+ - advantech,sub-dev
+
+if:
+ properties:
+ advantech,sub-dev:
+ contains:
+ const: 0x3
+then:
+ required:
+ - advantech,hwmon-profile
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/mfd/ahc1ec0-dt.h>
+ ahc1ec0 {
+ compatible = "advantech,ahc1ec0";
+
+ advantech,sub-dev-nb = <2>;
+ advantech,sub-dev = <AHC1EC0_SUBDEV_HWMON
+ AHC1EC0_SUBDEV_WDT>;
+
+ advantech,hwmon-profile = <AHC1EC0_HWMON_PRO_UNO2271G>;
+ };
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller
2021-01-18 12:37 [PATCH v6 1/6] MAINTAINERS: Add Advantech AHC1EC0 embedded controller entry Campion Kang
2021-01-18 12:37 ` [PATCH v6 2/6] mfd: ahc1ec0: Add Advantech EC include file used by dt-bindings Campion Kang
2021-01-18 12:37 ` [PATCH v6 3/6] dt-bindings: mfd: ahc1ec0.yaml: Add Advantech embedded controller - AHC1EC0 Campion Kang
@ 2021-01-18 12:37 ` Campion Kang
2021-01-19 7:25 ` AceLan Kao
2021-03-09 16:07 ` Lee Jones
2021-01-18 12:37 ` [PATCH v6 5/6] hwmon: ahc1ec0-hwmon: Add sub-device hwmon " Campion Kang
2021-01-18 12:37 ` [PATCH v6 6/6] watchdog: ahc1ec0-wdt: Add sub-device watchdog " Campion Kang
4 siblings, 2 replies; 20+ messages in thread
From: Campion Kang @ 2021-01-18 12:37 UTC (permalink / raw)
To: Lee Jones, Rob Herring, linux-kernel, devicetree, Jean Delvare,
Guenter Roeck, Wim Van Sebroeck, linux-hwmon, linux-watchdog,
AceLan Kao, Campion Kang
AHC1EC0 is the embedded controller driver for Advantech industrial
products. This provides sub-devices such as hwmon and watchdog, and also
expose functions for sub-devices to read/write the value to embedded
controller.
Changed since V5:
- Kconfig: add "AHC1EC0" string to clearly define the EC name
- fix the code according to reviewer's suggestion
- remove unnecessary header files
- change the structure name to lower case, align with others
naming
Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
---
drivers/mfd/Kconfig | 10 +
drivers/mfd/Makefile | 2 +
drivers/mfd/ahc1ec0.c | 808 ++++++++++++++++++++++++++++++++++++
include/linux/mfd/ahc1ec0.h | 276 ++++++++++++
4 files changed, 1096 insertions(+)
create mode 100644 drivers/mfd/ahc1ec0.c
create mode 100644 include/linux/mfd/ahc1ec0.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index bdfce7b15621..7d5fb5c17d9a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2154,5 +2154,15 @@ config MFD_INTEL_M10_BMC
additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_AHC1EC0
+ tristate "Advantech AHC1EC0 Embedded Controller Module"
+ depends on X86
+ select MFD_CORE
+ help
+ This is the core function that for Advantech EC drivers. It
+ includes the sub-devices such as hwmon, watchdog, etc. And also
+ provides expose functions for sub-devices to read/write the value
+ to embedded controller.
+
endmenu
endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 14fdb188af02..a6af9d8825f4 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -268,3 +268,5 @@ obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
+
+obj-$(CONFIG_MFD_AHC1EC0) += ahc1ec0.o
diff --git a/drivers/mfd/ahc1ec0.c b/drivers/mfd/ahc1ec0.c
new file mode 100644
index 000000000000..015f4307a54e
--- /dev/null
+++ b/drivers/mfd/ahc1ec0.c
@@ -0,0 +1,808 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Advantech embedded controller core driver AHC1EC0
+ *
+ * Copyright 2020 Advantech IIoT Group
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/errno.h>
+#include <linux/mfd/ahc1ec0.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+
+#define DRV_NAME "ahc1ec0"
+
+enum {
+ ADVEC_SUBDEV_BRIGHTNESS = 0,
+ ADVEC_SUBDEV_EEPROM,
+ ADVEC_SUBDEV_GPIO,
+ ADVEC_SUBDEV_HWMON,
+ ADVEC_SUBDEV_LED,
+ ADVEC_SUBDEV_WDT,
+ ADVEC_SUBDEV_MAX,
+};
+
+/* Wait IBF (Input Buffer Full) clear */
+static int ec_wait_write(void)
+{
+ int i;
+
+ for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
+ if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_IBF) == 0)
+ return 0;
+
+ udelay(EC_RETRY_UDELAY);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/* Wait OBF (Output Buffer Full) data ready */
+static int ec_wait_read(void)
+{
+ int i;
+
+ for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
+ if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_OBF) != 0)
+ return 0;
+
+ udelay(EC_RETRY_UDELAY);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/* Read data from EC HW RAM, the process is the following:
+ * Step 0. Wait IBF clear to send command
+ * Step 1. Send read command to EC command port
+ * Step 2. Wait IBF clear that means command is got by EC
+ * Step 3. Send read address to EC data port
+ * Step 4. Wait OBF data ready
+ * Step 5. Get data from EC data port
+ */
+int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char *data)
+{
+ int ret;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_HW_RAM_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(addr, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ *data = inb(EC_STATUS_PORT);
+
+ mutex_unlock(&adv_ec_data->lock);
+
+ return ret;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+ dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+
+/* Write data to EC HW RAM
+ * Step 0. Wait IBF clear to send command
+ * Step 1. Send write command to EC command port
+ * Step 2. Wait IBF clear that means command is got by EC
+ * Step 3. Send write address to EC data port
+ * Step 4. Wait IBF clear that means command is got by EC
+ * Step 5. Send data to EC data port
+ */
+int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char data)
+{
+ int ret;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_HW_RAM_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(addr, EC_STATUS_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(data, EC_STATUS_PORT);
+
+ mutex_unlock(&adv_ec_data->lock);
+
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(write_hw_ram);
+
+/* Get dynamic control table */
+static int adv_get_dynamic_tab(struct adv_ec_platform_data *adv_ec_data)
+{
+ int i, ret;
+ unsigned char pin_tmp, device_id;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ for (i = 0; i < EC_MAX_TBL_NUM; i++) {
+ adv_ec_data->dym_tbl[i].device_id = 0xff;
+ adv_ec_data->dym_tbl[i].hw_pin_num = 0xff;
+ }
+
+ for (i = 0; i < EC_MAX_TBL_NUM; i++) {
+ ret = ec_wait_write();
+ if (ret) {
+ dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
+ __LINE__);
+ goto error;
+ }
+ outb(EC_TBL_WRITE_ITEM, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret) {
+ dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
+ __LINE__);
+ goto error;
+ }
+ outb(i, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret) {
+ dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
+ __LINE__);
+ goto error;
+ }
+
+ /*
+ * If item is defined, EC will return item number.
+ * If table item is not defined, EC will return 0xFF.
+ */
+ pin_tmp = inb(EC_STATUS_PORT);
+ if (pin_tmp == 0xff) {
+ dev_dbg(adv_ec_data->dev, "%s: inb(EC_STATUS_PORT)=0x%02x != 0xff.\n",
+ __func__, pin_tmp);
+ goto pass;
+ }
+
+ ret = ec_wait_write();
+ if (ret) {
+ dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
+ __LINE__);
+ goto error;
+ }
+ outb(EC_TBL_GET_PIN, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret) {
+ dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
+ __LINE__);
+ goto error;
+ }
+ pin_tmp = inb(EC_STATUS_PORT) & 0xff;
+ if (pin_tmp == 0xff) {
+ dev_dbg(adv_ec_data->dev, "%s: pin_tmp(0x%02X). line: %d\n", __func__,
+ pin_tmp, __LINE__);
+ goto pass;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_TBL_GET_DEVID, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret) {
+ dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
+ __LINE__);
+ goto error;
+ }
+ device_id = inb(EC_STATUS_PORT) & 0xff;
+
+ dev_dbg(adv_ec_data->dev, "%s: device_id=0x%02X. line: %d\n", __func__,
+ device_id, __LINE__);
+
+ adv_ec_data->dym_tbl[i].device_id = device_id;
+ adv_ec_data->dym_tbl[i].hw_pin_num = pin_tmp;
+ }
+
+pass:
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+ dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
+ __func__, __LINE__);
+ return ret;
+}
+
+int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
+ unsigned char multi)
+{
+ int ret;
+ u32 ret_val;
+ unsigned int LSB, MSB;
+
+ mutex_lock(&adv_ec_data->lock);
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_AD_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(hwpin, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ mutex_unlock(&adv_ec_data->lock);
+ return -1;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_AD_LSB_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ LSB = inb(EC_STATUS_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_AD_MSB_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ MSB = inb(EC_STATUS_PORT);
+ ret_val = ((MSB << 8) | LSB) & 0x03FF;
+ ret_val = ret_val * multi * 100;
+
+ mutex_unlock(&adv_ec_data->lock);
+ return ret_val;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(read_ad_value);
+
+int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+ unsigned char *pvalue)
+{
+ int ret;
+ unsigned char value;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_ACPI_RAM_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(addr, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ value = inb(EC_STATUS_PORT);
+ *pvalue = value;
+
+ mutex_unlock(&adv_ec_data->lock);
+
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(read_acpi_value);
+
+int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+ unsigned char value)
+{
+ int ret;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_ACPI_DATA_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(addr, EC_STATUS_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(value, EC_STATUS_PORT);
+
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+
+int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char *pvalue)
+{
+ int ret;
+
+ unsigned char gpio_status_value;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(PinNumber, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
+ mutex_unlock(&adv_ec_data->lock);
+ return -1;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_STATUS_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ gpio_status_value = inb(EC_STATUS_PORT);
+
+ *pvalue = gpio_status_value;
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+ return ret;
+}
+
+int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char value)
+{
+ int ret;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(PinNumber, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ mutex_unlock(&adv_ec_data->lock);
+ dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
+ return -1;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_STATUS_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(value, EC_STATUS_PORT);
+
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+ dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d", __func__,
+ __LINE__);
+
+ return ret;
+}
+
+int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char *pvalue)
+{
+ int ret;
+ unsigned char gpio_dir_value;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(PinNumber, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ mutex_unlock(&adv_ec_data->lock);
+ dev_err(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
+ __LINE__);
+ return -1;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_DIR_READ, EC_COMMAND_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+ gpio_dir_value = inb(EC_STATUS_PORT);
+ *pvalue = gpio_dir_value;
+
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+
+int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char value)
+{
+ int ret;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(PinNumber, EC_STATUS_PORT);
+
+ ret = ec_wait_read();
+ if (ret)
+ goto error;
+
+ if (inb(EC_STATUS_PORT) == 0xff) {
+ mutex_unlock(&adv_ec_data->lock);
+ dev_warn(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
+ __LINE__);
+
+ return -1;
+ }
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(EC_GPIO_DIR_WRITE, EC_COMMAND_PORT);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(value, EC_STATUS_PORT);
+
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+
+int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data)
+{
+ int ret;
+
+ mutex_lock(&adv_ec_data->lock);
+
+ ret = ec_wait_write();
+ if (ret)
+ goto error;
+ outb(data, EC_COMMAND_PORT);
+
+ mutex_unlock(&adv_ec_data->lock);
+ return 0;
+
+error:
+ mutex_unlock(&adv_ec_data->lock);
+
+ dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
+ __LINE__);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(write_hwram_command);
+
+static int adv_ec_get_productname(struct adv_ec_platform_data *adv_ec_data, char *product)
+{
+ const char *vendor, *device;
+ int length = 0;
+
+ /* Check it is Advantech board */
+ vendor = dmi_get_system_info(DMI_SYS_VENDOR);
+ if (memcmp(vendor, "Advantech", sizeof("Advantech")) != 0)
+ return -ENODEV;
+
+ /* Get product model name */
+ device = dmi_get_system_info(DMI_PRODUCT_NAME);
+ if (device) {
+ while ((device[length] != ' ')
+ && (length < AMI_ADVANTECH_BOARD_ID_LENGTH))
+ length++;
+ memset(product, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
+ memmove(product, device, length);
+
+ dev_info(adv_ec_data->dev, "BIOS Product Name = %s\n", product);
+
+ return 0;
+ }
+
+ dev_warn(adv_ec_data->dev, "This device is not Advantech Board (%s)!\n", product);
+
+ return -ENODEV;
+}
+
+static const struct mfd_cell adv_ec_sub_cells[] = {
+ { .name = "adv-ec-brightness", },
+ { .name = "adv-ec-eeprom", },
+ { .name = "adv-ec-gpio", },
+ { .name = "ahc1ec0-hwmon", },
+ { .name = "adv-ec-led", },
+ { .name = "ahc1ec0-wdt", },
+};
+
+static int adv_ec_init_ec_data(struct adv_ec_platform_data *adv_ec_data)
+{
+ int ret;
+
+ adv_ec_data->sub_dev_mask = 0;
+ adv_ec_data->sub_dev_nb = 0;
+ adv_ec_data->dym_tbl = NULL;
+ adv_ec_data->bios_product_name = NULL;
+
+ mutex_init(&adv_ec_data->lock);
+
+ /* Get product name */
+ adv_ec_data->bios_product_name =
+ devm_kzalloc(adv_ec_data->dev, AMI_ADVANTECH_BOARD_ID_LENGTH, GFP_KERNEL);
+ if (!adv_ec_data->bios_product_name)
+ return -ENOMEM;
+
+ memset(adv_ec_data->bios_product_name, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
+ ret = adv_ec_get_productname(adv_ec_data, adv_ec_data->bios_product_name);
+ if (ret)
+ return ret;
+
+ /* Get pin table */
+ adv_ec_data->dym_tbl = devm_kzalloc(adv_ec_data->dev,
+ EC_MAX_TBL_NUM * sizeof(struct ec_dynamic_table),
+ GFP_KERNEL);
+ if (!adv_ec_data->dym_tbl)
+ return -ENOMEM;
+
+ ret = adv_get_dynamic_tab(adv_ec_data);
+
+ return ret;
+}
+
+static int adv_ec_parse_prop(struct adv_ec_platform_data *adv_ec_data)
+{
+ int i, ret;
+ u32 nb, sub_dev[ADVEC_SUBDEV_MAX];
+
+ ret = device_property_read_u32(adv_ec_data->dev, "advantech,sub-dev-nb", &nb);
+ if (ret < 0) {
+ dev_err(adv_ec_data->dev, "get sub-dev-nb failed! (%d)\n", ret);
+ return ret;
+ }
+ adv_ec_data->sub_dev_nb = nb;
+
+ ret = device_property_read_u32_array(adv_ec_data->dev, "advantech,sub-dev",
+ sub_dev, nb);
+ if (ret < 0) {
+ dev_err(adv_ec_data->dev, "get sub-dev failed! (%d)\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < nb; i++) {
+ switch (sub_dev[i]) {
+ case ADVEC_SUBDEV_BRIGHTNESS:
+ case ADVEC_SUBDEV_EEPROM:
+ case ADVEC_SUBDEV_GPIO:
+ case ADVEC_SUBDEV_HWMON:
+ case ADVEC_SUBDEV_LED:
+ case ADVEC_SUBDEV_WDT:
+ adv_ec_data->sub_dev_mask |= BIT(sub_dev[i]);
+ break;
+ default:
+ dev_err(adv_ec_data->dev, "invalid prop value(%d)!\n",
+ sub_dev[i]);
+ }
+ }
+ dev_info(adv_ec_data->dev, "sub-dev mask = 0x%x\n", adv_ec_data->sub_dev_mask);
+
+ return 0;
+}
+
+static int adv_ec_probe(struct platform_device *pdev)
+{
+ int ret, i;
+ struct device *dev = &pdev->dev;
+ struct adv_ec_platform_data *adv_ec_data;
+
+ adv_ec_data = devm_kzalloc(dev, sizeof(struct adv_ec_platform_data), GFP_KERNEL);
+ if (!adv_ec_data)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, adv_ec_data);
+ adv_ec_data->dev = dev;
+
+ ret = adv_ec_init_ec_data(adv_ec_data);
+ if (ret)
+ goto err_init_data;
+
+ ret = adv_ec_parse_prop(adv_ec_data);
+ if (ret)
+ goto err_prop;
+
+ /* check whether this EC has the following subdevices. */
+ for (i = 0; i < ARRAY_SIZE(adv_ec_sub_cells); i++) {
+ if (adv_ec_data->sub_dev_mask & BIT(i)) {
+ ret = mfd_add_hotplug_devices(dev, &adv_ec_sub_cells[i], 1);
+ dev_info(adv_ec_data->dev, "mfd_add_hotplug_devices[%d] %s\n", i,
+ adv_ec_sub_cells[i].name);
+ if (ret)
+ dev_err(dev, "failed to add %s subdevice: %d\n",
+ adv_ec_sub_cells[i].name, ret);
+ }
+ }
+
+ dev_info(adv_ec_data->dev, "Advantech EC probe done");
+
+ return 0;
+
+err_prop:
+ dev_err(dev, "failed to probe\n");
+
+err_init_data:
+ mutex_destroy(&adv_ec_data->lock);
+
+ dev_err(dev, "failed to init data\n");
+
+ return ret;
+}
+
+static int adv_ec_remove(struct platform_device *pdev)
+{
+ struct adv_ec_platform_data *adv_ec_data;
+
+ adv_ec_data = dev_get_drvdata(&pdev->dev);
+
+ mutex_destroy(&adv_ec_data->lock);
+
+ mfd_remove_devices(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id adv_ec_of_match[] __maybe_unused = {
+ {
+ .compatible = "advantech,ahc1ec0",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, adv_ec_of_match);
+
+static const struct acpi_device_id adv_ec_acpi_match[] __maybe_unused = {
+ {"AHC1EC0", 0},
+ {},
+};
+MODULE_DEVICE_TABLE(acpi, adv_ec_acpi_match);
+
+static struct platform_driver adv_ec_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = of_match_ptr(adv_ec_of_match),
+ .acpi_match_table = ACPI_PTR(adv_ec_acpi_match),
+ },
+ .probe = adv_ec_probe,
+ .remove = adv_ec_remove,
+};
+module_platform_driver(adv_ec_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DESCRIPTION("Advantech Embedded Controller core driver.");
+MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
+MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@advantech.com.cn>");
+MODULE_VERSION("1.0");
diff --git a/include/linux/mfd/ahc1ec0.h b/include/linux/mfd/ahc1ec0.h
new file mode 100644
index 000000000000..1b01e10c1fef
--- /dev/null
+++ b/include/linux/mfd/ahc1ec0.h
@@ -0,0 +1,276 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef __LINUX_MFD_AHC1EC0_H
+#define __LINUX_MFD_AHC1EC0_H
+
+#include <linux/device.h>
+
+#define EC_COMMAND_PORT 0x29A /* EC I/O command port */
+#define EC_STATUS_PORT 0x299 /* EC I/O data port */
+
+#define EC_RETRY_UDELAY 200 /* EC command retry delay in microseconds */
+#define EC_MAX_TIMEOUT_COUNT 5000 /* EC command max retry count */
+#define EC_COMMAND_BIT_OBF 0x01 /* Bit 0 is for OBF ready (Output buffer full) */
+#define EC_COMMAND_BIT_IBF 0x02 /* Bit 1 is for IBF ready (Input buffer full) */
+
+/* Analog to digital converter command */
+#define EC_AD_INDEX_WRITE 0x15 /* Write ADC port number into index */
+#define EC_AD_LSB_READ 0x16 /* Read ADC LSB value from ADC port */
+#define EC_AD_MSB_READ 0x1F /* Read ADC MSB value from ADC port */
+
+/* Voltage device ID */
+#define EC_DID_SMBOEM0 0x28 /* SMBUS/I2C. Smbus channel 0 */
+#define EC_DID_CMOSBAT 0x50 /* CMOS coin battery voltage */
+#define EC_DID_CMOSBAT_X2 0x51 /* CMOS coin battery voltage*2 */
+#define EC_DID_CMOSBAT_X10 0x52 /* CMOS coin battery voltage*10 */
+#define EC_DID_5VS0 0x56 /* 5VS0 voltage */
+#define EC_DID_5VS0_X2 0x57 /* 5VS0 voltage*2 */
+#define EC_DID_5VS0_X10 0x58 /* 5VS0 voltage*10 */
+#define EC_DID_5VS5 0x59 /* 5VS5 voltage */
+#define EC_DID_5VS5_X2 0x5A /* 5VS5 voltage*2 */
+#define EC_DID_5VS5_X10 0x5B /* 5VS5 voltage*10 */
+#define EC_DID_12VS0 0x62 /* 12VS0 voltage */
+#define EC_DID_12VS0_X2 0x63 /* 12VS0 voltage*2 */
+#define EC_DID_12VS0_X10 0x64 /* 12VS0 voltage*10 */
+#define EC_DID_VCOREA 0x65 /* CPU A core voltage */
+#define EC_DID_VCOREA_X2 0x66 /* CPU A core voltage*2 */
+#define EC_DID_VCOREA_X10 0x67 /* CPU A core voltage*10 */
+#define EC_DID_VCOREB 0x68 /* CPU B core voltage */
+#define EC_DID_VCOREB_X2 0x69 /* CPU B core voltage*2 */
+#define EC_DID_VCOREB_X10 0x6A /* CPU B core voltage*10 */
+#define EC_DID_DC 0x6B /* ADC. onboard voltage */
+#define EC_DID_DC_X2 0x6C /* ADC. onboard voltage*2 */
+#define EC_DID_DC_X10 0x6D /* ADC. onboard voltage*10 */
+
+/* Current device ID */
+#define EC_DID_CURRENT 0x74
+
+/* ACPI commands */
+#define EC_ACPI_RAM_READ 0x80
+#define EC_ACPI_RAM_WRITE 0x81
+
+/*
+ * Dynamic control table commands
+ * The table includes HW pin number, Device ID, and Pin polarity
+ */
+#define EC_TBL_WRITE_ITEM 0x20
+#define EC_TBL_GET_PIN 0x21
+#define EC_TBL_GET_DEVID 0x22
+#define EC_MAX_TBL_NUM 32
+
+/* LED Device ID table */
+#define EC_DID_LED_RUN 0xE1
+#define EC_DID_LED_ERR 0xE2
+#define EC_DID_LED_SYS_RECOVERY 0xE3
+#define EC_DID_LED_D105_G 0xE4
+#define EC_DID_LED_D106_G 0xE5
+#define EC_DID_LED_D107_G 0xE6
+
+/* LED control HW RAM address 0xA0-0xAF */
+#define EC_HWRAM_LED_BASE_ADDR 0xA0
+#define EC_HWRAM_LED_PIN(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N))) // N:0-3
+#define EC_HWRAM_LED_CTRL_HIBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 1)
+#define EC_HWRAM_LED_CTRL_LOBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 2)
+#define EC_HWRAM_LED_DEVICE_ID(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 3)
+
+/* LED control bit */
+#define LED_CTRL_ENABLE_BIT() BIT(4)
+#define LED_CTRL_INTCTL_BIT() BIT(5)
+#define LED_CTRL_LEDBIT_MASK (0x03FF << 6)
+#define LED_CTRL_POLARITY_MASK (0x000F << 0)
+#define LED_CTRL_INTCTL_EXTERNAL 0
+#define LED_CTRL_INTCTL_INTERNAL 1
+
+#define LED_DISABLE 0x0
+#define LED_ON 0x1
+#define LED_FAST 0x3
+#define LED_NORMAL 0x5
+#define LED_SLOW 0x7
+#define LED_MANUAL 0xF
+
+#define LED_CTRL_LEDBIT_DISABLE 0x0000
+#define LED_CTRL_LEDBIT_ON 0x03FF
+#define LED_CTRL_LEDBIT_FAST 0x02AA
+#define LED_CTRL_LEDBIT_NORMAL 0x0333
+#define LED_CTRL_LEDBIT_SLOW 0x03E0
+
+/* Get the device name */
+#define AMI_ADVANTECH_BOARD_ID_LENGTH 32
+
+/*
+ * Advantech Embedded Controller watchdog commands
+ * EC can send multi-stage watchdog event. System can setup watchdog event
+ * independently to make up event sequence.
+ */
+#define EC_COMMANS_PORT_IBF_MASK 0x02
+#define EC_RESET_EVENT 0x04
+#define EC_WDT_START 0x28
+#define EC_WDT_STOP 0x29
+#define EC_WDT_RESET 0x2A
+#define EC_WDT_BOOTTMEWDT_STOP 0x2B
+
+#define EC_HW_RAM 0x89
+
+#define EC_EVENT_FLAG 0x57
+#define EC_ENABLE_DELAY_H 0x58
+#define EC_ENABLE_DELAY_L 0x59
+#define EC_POWER_BTN_TIME_H 0x5A
+#define EC_POWER_BTN_TIME_L 0x5B
+#define EC_RESET_DELAY_TIME_H 0x5E
+#define EC_RESET_DELAY_TIME_L 0x5F
+#define EC_PIN_DELAY_TIME_H 0x60
+#define EC_PIN_DELAY_TIME_L 0x61
+#define EC_SCI_DELAY_TIME_H 0x62
+#define EC_SCI_DELAY_TIME_L 0x63
+
+/* EC ACPI commands */
+#define EC_ACPI_DATA_READ 0x80
+#define EC_ACPI_DATA_WRITE 0x81
+
+/* Brightness ACPI Addr */
+#define BRIGHTNESS_ACPI_ADDR 0x50
+
+/* EC HW RAM commands */
+#define EC_HW_EXTEND_RAM_READ 0x86
+#define EC_HW_EXTEND_RAM_WRITE 0x87
+#define EC_HW_RAM_READ 0x88
+#define EC_HW_RAM_WRITE 0x89
+
+/* EC Smbus commands */
+#define EC_SMBUS_CHANNEL_SET 0x8A /* Set selector number (SMBUS channel) */
+#define EC_SMBUS_ENABLE_I2C 0x8C /* Enable channel I2C */
+#define EC_SMBUS_DISABLE_I2C 0x8D /* Disable channel I2C */
+
+/* Smbus transmit protocol */
+#define EC_SMBUS_PROTOCOL 0x00
+
+/* SMBUS status */
+#define EC_SMBUS_STATUS 0x01
+
+/* SMBUS device slave address (bit0 must be 0) */
+#define EC_SMBUS_SLV_ADDR 0x02
+
+/* SMBUS device command */
+#define EC_SMBUS_CMD 0x03
+
+/* 0x04-0x24 Data In read process, return data are stored in this address */
+#define EC_SMBUS_DATA 0x04
+
+#define EC_SMBUS_DAT_OFFSET(n) (EC_SMBUS_DATA + (n))
+
+/* SMBUS channel selector (0-4) */
+#define EC_SMBUS_CHANNEL 0x2B
+
+/* EC SMBUS transmit Protocol code */
+#define SMBUS_QUICK_WRITE 0x02 /* Write Quick Command */
+#define SMBUS_QUICK_READ 0x03 /* Read Quick Command */
+#define SMBUS_BYTE_SEND 0x04 /* Send Byte */
+#define SMBUS_BYTE_RECEIVE 0x05 /* Receive Byte */
+#define SMBUS_BYTE_WRITE 0x06 /* Write Byte */
+#define SMBUS_BYTE_READ 0x07 /* Read Byte */
+#define SMBUS_WORD_WRITE 0x08 /* Write Word */
+#define SMBUS_WORD_READ 0x09 /* Read Word */
+#define SMBUS_BLOCK_WRITE 0x0A /* Write Block */
+#define SMBUS_BLOCK_READ 0x0B /* Read Block */
+#define SMBUS_PROC_CALL 0x0C /* Process Call */
+#define SMBUS_BLOCK_PROC_CALL 0x0D /* Write Block-Read Block Process Call */
+#define SMBUS_I2C_READ_WRITE 0x0E /* I2C block Read-Write */
+#define SMBUS_I2C_WRITE_READ 0x0F /* I2C block Write-Read */
+
+/* GPIO control commands */
+#define EC_GPIO_INDEX_WRITE 0x10
+#define EC_GPIO_STATUS_READ 0x11
+#define EC_GPIO_STATUS_WRITE 0x12
+#define EC_GPIO_DIR_READ 0x1D
+#define EC_GPIO_DIR_WRITE 0x1E
+
+/* One Key Recovery commands */
+#define EC_ONE_KEY_FLAG 0x9C
+
+/* ASG OEM commands */
+#define EC_ASG_OEM 0xEA
+#define EC_ASG_OEM_READ 0x00
+#define EC_ASG_OEM_WRITE 0x01
+#define EC_OEM_POWER_STATUS_VIN1 0X10
+#define EC_OEM_POWER_STATUS_VIN2 0X11
+#define EC_OEM_POWER_STATUS_BAT1 0X12
+#define EC_OEM_POWER_STATUS_BAT2 0X13
+
+/* GPIO DEVICE ID */
+#define EC_DID_ALTGPIO_0 0x10 /* 0x10 AltGpio0 User define gpio */
+#define EC_DID_ALTGPIO_1 0x11 /* 0x11 AltGpio1 User define gpio */
+#define EC_DID_ALTGPIO_2 0x12 /* 0x12 AltGpio2 User define gpio */
+#define EC_DID_ALTGPIO_3 0x13 /* 0x13 AltGpio3 User define gpio */
+#define EC_DID_ALTGPIO_4 0x14 /* 0x14 AltGpio4 User define gpio */
+#define EC_DID_ALTGPIO_5 0x15 /* 0x15 AltGpio5 User define gpio */
+#define EC_DID_ALTGPIO_6 0x16 /* 0x16 AltGpio6 User define gpio */
+#define EC_DID_ALTGPIO_7 0x17 /* 0x17 AltGpio7 User define gpio */
+
+/* Lmsensor Chip Register */
+#define NSLM96163_CHANNEL 0x02
+
+/* NS_LM96163 address 0x98 */
+#define NSLM96163_ADDR 0x98
+
+/* LM96163 index(0x00) Local Temperature (Signed MSB) */
+#define NSLM96163_LOC_TEMP 0x00
+
+/* HWMON registers */
+#define INA266_REG_VOLTAGE 0x02 /* 1.25mV */
+#define INA266_REG_POWER 0x03 /* 25mW */
+#define INA266_REG_CURRENT 0x04 /* 1mA */
+
+struct ec_hw_pin_table {
+ unsigned int vbat[2];
+ unsigned int v5[2];
+ unsigned int v12[2];
+ unsigned int vcore[2];
+ unsigned int vdc[2];
+ unsigned int ec_current[2];
+ unsigned int power[2];
+};
+
+struct ec_dynamic_table {
+ unsigned char device_id;
+ unsigned char hw_pin_num;
+};
+
+struct ec_smbuso_em0 {
+ unsigned char hw_pin_num;
+};
+
+struct pled_hw_pin_tbl {
+ unsigned int pled[6];
+};
+
+struct adv_ec_platform_data {
+ char *bios_product_name;
+ int sub_dev_nb;
+ u32 sub_dev_mask;
+ struct mutex lock;
+ struct device *dev;
+ struct class *adv_ec_class;
+
+ struct ec_dynamic_table *dym_tbl;
+};
+
+int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
+ unsigned char multi);
+int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+ unsigned char *pvalue);
+int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+ unsigned char value);
+int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+ unsigned char *data);
+int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
+ unsigned char data);
+int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data);
+int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char *pvalue);
+int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char value);
+int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char *pvalue);
+int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
+ unsigned char value);
+
+#endif /* __LINUX_MFD_AHC1EC0_H */
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v6 5/6] hwmon: ahc1ec0-hwmon: Add sub-device hwmon for Advantech embedded controller
2021-01-18 12:37 [PATCH v6 1/6] MAINTAINERS: Add Advantech AHC1EC0 embedded controller entry Campion Kang
` (2 preceding siblings ...)
2021-01-18 12:37 ` [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller Campion Kang
@ 2021-01-18 12:37 ` Campion Kang
2021-01-19 7:26 ` AceLan Kao
2021-01-23 16:35 ` Guenter Roeck
2021-01-18 12:37 ` [PATCH v6 6/6] watchdog: ahc1ec0-wdt: Add sub-device watchdog " Campion Kang
4 siblings, 2 replies; 20+ messages in thread
From: Campion Kang @ 2021-01-18 12:37 UTC (permalink / raw)
To: Lee Jones, Rob Herring, linux-kernel, devicetree, Jean Delvare,
Guenter Roeck, Wim Van Sebroeck, linux-hwmon, linux-watchdog,
AceLan Kao, Campion Kang
This is one of sub-device driver for Advantech embedded controller
AHC1EC0. This driver provides sysfs ABI for Advantech related
applications to monitor the system status.
Changed since V5:
- remove unnecessary header files
- Using [devm_]hwmon_device_register_with_info() to register
hwmon driver based on reviewer's suggestion
Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
---
drivers/hwmon/Kconfig | 10 +
drivers/hwmon/Makefile | 1 +
drivers/hwmon/ahc1ec0-hwmon.c | 660 ++++++++++++++++++++++++++++++++++
3 files changed, 671 insertions(+)
create mode 100644 drivers/hwmon/ahc1ec0-hwmon.c
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 1ecf697d8d99..bfa007026679 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2139,6 +2139,16 @@ config SENSORS_INTEL_M10_BMC_HWMON
sensors monitor various telemetry data of different components on the
card, e.g. board temperature, FPGA core temperature/voltage/current.
+config SENSORS_AHC1EC0_HWMON
+ tristate "Advantech AHC1EC0 Hardware Monitor Function"
+ depends on MFD_AHC1EC0
+ help
+ This driver provide support for the hardware monitoring functionality
+ for Advantech AHC1EC0 embedded controller on the board.
+
+ This driver provides the sysfs attributes for applications to monitor
+ the system status, including system temperatures, voltages, current.
+
if ACPI
comment "ACPI drivers"
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 09a86c5e1d29..0c37747e8c4f 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_SENSORS_ADT7411) += adt7411.o
obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o
obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
+obj-$(CONFIG_SENSORS_AHC1EC0_HWMON) += ahc1ec0-hwmon.o
obj-$(CONFIG_SENSORS_AMD_ENERGY) += amd_energy.o
obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
obj-$(CONFIG_SENSORS_ARM_SCMI) += scmi-hwmon.o
diff --git a/drivers/hwmon/ahc1ec0-hwmon.c b/drivers/hwmon/ahc1ec0-hwmon.c
new file mode 100644
index 000000000000..688f07e6a6e0
--- /dev/null
+++ b/drivers/hwmon/ahc1ec0-hwmon.c
@@ -0,0 +1,660 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * HWMON Driver for Advantech Embedded Controller chip AHC1EC0
+ *
+ * Copyright 2020, Advantech IIoT Group
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/hwmon.h>
+#include <linux/mfd/ahc1ec0.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+struct ec_hwmon_attrs {
+ const char *name;
+ umode_t mode;
+ int (*read)(struct device *dev, long *val);
+};
+
+struct adv_hwmon_profile {
+ int offset;
+ unsigned long resolution, resolution_vin, resolution_sys, resolution_curr, resolution_power;
+ unsigned long r1, r1_vin, r1_sys, r1_curr, r1_power;
+ unsigned long r2, r2_vin, r2_sys, r2_curr, r2_power;
+ int hwmon_in_list_cnt;
+ int temp_list_cnt;
+ int *hwmon_in_list;
+ int *temp_list;
+};
+
+struct ec_hwmon_data {
+ struct device *dev;
+ struct device *hwmon_dev;
+ struct adv_ec_platform_data *adv_ec_data;
+ unsigned long temperature[3];
+ unsigned long ec_current[5];
+ unsigned long power[5];
+ unsigned long voltage[7];
+
+ struct ec_hw_pin_table pin_tbl;
+ struct ec_smbuso_em0 ec_smboem0;
+ struct adv_hwmon_profile *profile;
+};
+
+static int get_ec_in_vbat_input(struct device *dev, long *val);
+static int get_ec_in_v5_input(struct device *dev, long *val);
+static int get_ec_in_v12_input(struct device *dev, long *val);
+static int get_ec_in_vcore_input(struct device *dev, long *val);
+static int get_ec_current1_input(struct device *dev, long *val);
+static int get_ec_cpu_temp(struct device *dev, long *val);
+static int get_ec_sys_temp(struct device *dev, long *val);
+
+const struct ec_hwmon_attrs ec_hwmon_in_attr_template[] = {
+ {"VBAT", 0444, get_ec_in_vbat_input}, // in1
+ {"5VSB", 0444, get_ec_in_v5_input}, // in2
+ {"Vin", 0444, get_ec_in_v12_input}, // in3 (== in8)
+ {"VCORE", 0444, get_ec_in_vcore_input}, // in4
+ {"Vin1", 0444, NULL}, // in5
+ {"Vin2", 0444, NULL}, // in6
+ {"System Voltage", 0444, NULL}, // in7
+ {"Current", 0444, get_ec_current1_input},
+};
+
+const struct ec_hwmon_attrs ec_temp_attrs_template[] = {
+ {"CPU Temp", 0444, get_ec_cpu_temp},
+ {"System Temp", 0444, get_ec_sys_temp},
+};
+
+enum ec_hwmon_in_type {
+ EC_HWMON_IN_VBAT,
+ EC_HWMON_IN_5VSB,
+ EC_HWMON_IN_12V,
+ EC_HWMON_IN_VCORE,
+ EC_HWMON_IN_VIN1,
+ EC_HWMON_IN_VIN2,
+ EC_HWMON_IN_SYS_VOL,
+ EC_HWMON_IN_CURRENT,
+};
+
+enum ec_temp_type {
+ EC_TEMP_CPU,
+ EC_TEMP_SYS,
+};
+
+static int hwmon_in_list_0[] = {
+ EC_HWMON_IN_VBAT,
+ EC_HWMON_IN_5VSB,
+ EC_HWMON_IN_12V,
+ EC_HWMON_IN_VCORE,
+ EC_HWMON_IN_CURRENT,
+};
+
+static int hwmon_in_list_1[] = {
+ EC_HWMON_IN_VBAT,
+ EC_HWMON_IN_5VSB,
+ EC_HWMON_IN_12V,
+ EC_HWMON_IN_VCORE,
+};
+
+static int temp_list_0[] = {
+ EC_TEMP_CPU,
+};
+
+static int temp_list_1[] = {
+ EC_TEMP_CPU,
+ EC_TEMP_SYS,
+};
+
+static struct adv_hwmon_profile advec_profile[] = {
+ /*
+ * TPC-8100TR, TPC-651T-E3AE, TPC-1251T-E3AE, TPC-1551T-E3AE,
+ * TPC-1751T-E3AE, TPC-1051WP-E3AE, TPC-1551WP-E3AE, TPC-1581WP-433AE,
+ * TPC-1782H-433AE, UNO-1483G-434AE, UNO-2483G-434AE, UNO-3483G-374AE,
+ * UNO-2473G, UNO-2484G-6???AE, UNO-2484G-7???AE, UNO-3283G-674AE,
+ * UNO-3285G-674AE
+ * [0] AHC1EC0_HWMON_PRO_TEMPLATE
+ */
+ {
+ .resolution = 2929,
+ .r1 = 1912,
+ .r2 = 1000,
+ .offset = 0,
+ .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_0),
+ .temp_list_cnt = ARRAY_SIZE(temp_list_0),
+ .hwmon_in_list = hwmon_in_list_0,
+ .temp_list = temp_list_0,
+ },
+ /*
+ * TPC-B500-6??AE, TPC-5???T-6??AE, TPC-5???W-6??AE, TPC-B200-???AE,
+ * TPC-2???T-???AE, TPC-2???W-???AE
+ * [1] AHC1EC0_HWMON_PRO_TPC5XXX
+ */
+ {
+ .resolution = 2929,
+ .r1 = 1912,
+ .r2 = 1000,
+ .offset = 0,
+ .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
+ .temp_list_cnt = ARRAY_SIZE(temp_list_0),
+ .hwmon_in_list = hwmon_in_list_1,
+ .temp_list = temp_list_0,
+ },
+ /* PR/VR4
+ * [2] AHC1EC0_HWMON_PRO_PRVR4
+ */
+ {
+ .resolution = 2929,
+ .r1 = 1912,
+ .r2 = 1000,
+ .offset = 0,
+ .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
+ .temp_list_cnt = ARRAY_SIZE(temp_list_1),
+ .hwmon_in_list = hwmon_in_list_1,
+ .temp_list = temp_list_1,
+ },
+ /* UNO-2271G-E22AE/E23AE/E022AE/E023AE,UNO-420
+ * [3] AHC1EC0_HWMON_PRO_UNO2271G
+ */
+ {
+ .resolution = 2929,
+ .r1 = 1912,
+ .r2 = 1000,
+ .offset = 0,
+ .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
+ .temp_list_cnt = ARRAY_SIZE(temp_list_0),
+ .hwmon_in_list = hwmon_in_list_1,
+ .temp_list = temp_list_0,
+ },
+};
+
+static void adv_ec_init_hwmon_profile(u32 profile, struct ec_hwmon_data *lmsensor_data)
+{
+ int i;
+ struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
+ struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
+ struct ec_dynamic_table *dym_tbl = adv_ec_data->dym_tbl;
+
+ if (profile >= ARRAY_SIZE(advec_profile))
+ return;
+
+ lmsensor_data->profile = &advec_profile[profile];
+
+ for (i = 0; i < EC_MAX_TBL_NUM ; i++) {
+ switch (dym_tbl[i].device_id) {
+ case EC_DID_CMOSBAT:
+ ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vbat[1] = 1;
+ break;
+ case EC_DID_CMOSBAT_X2:
+ ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vbat[1] = 2;
+ break;
+ case EC_DID_CMOSBAT_X10:
+ ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vbat[1] = 10;
+ break;
+ case EC_DID_5VS0:
+ case EC_DID_5VS5:
+ ptbl->v5[0] = dym_tbl[i].hw_pin_num;
+ ptbl->v5[1] = 1;
+ break;
+ case EC_DID_5VS0_X2:
+ case EC_DID_5VS5_X2:
+ ptbl->v5[0] = dym_tbl[i].hw_pin_num;
+ ptbl->v5[1] = 2;
+ break;
+ case EC_DID_5VS0_X10:
+ case EC_DID_5VS5_X10:
+ ptbl->v5[0] = dym_tbl[i].hw_pin_num;
+ ptbl->v5[1] = 10;
+ break;
+ case EC_DID_12VS0:
+ ptbl->v12[0] = dym_tbl[i].hw_pin_num;
+ ptbl->v12[1] = 1;
+ break;
+ case EC_DID_12VS0_X2:
+ ptbl->v12[0] = dym_tbl[i].hw_pin_num;
+ ptbl->v12[1] = 2;
+ break;
+ case EC_DID_12VS0_X10:
+ ptbl->v12[0] = dym_tbl[i].hw_pin_num;
+ ptbl->v12[1] = 10;
+ break;
+ case EC_DID_VCOREA:
+ case EC_DID_VCOREB:
+ ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vcore[1] = 1;
+ break;
+ case EC_DID_VCOREA_X2:
+ case EC_DID_VCOREB_X2:
+ ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vcore[1] = 2;
+ break;
+ case EC_DID_VCOREA_X10:
+ case EC_DID_VCOREB_X10:
+ ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vcore[1] = 10;
+ break;
+ case EC_DID_DC:
+ ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vdc[1] = 1;
+ break;
+ case EC_DID_DC_X2:
+ ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vdc[1] = 2;
+ break;
+ case EC_DID_DC_X10:
+ ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
+ ptbl->vdc[1] = 10;
+ break;
+ case EC_DID_CURRENT:
+ ptbl->ec_current[0] = dym_tbl[i].hw_pin_num;
+ ptbl->ec_current[1] = 1;
+ break;
+ case EC_DID_SMBOEM0:
+ lmsensor_data->ec_smboem0.hw_pin_num = dym_tbl[i].hw_pin_num;
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+static int get_ec_in_vbat_input(struct device *dev, long *val)
+{
+ unsigned int temp = 0;
+ unsigned long voltage = 0;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+
+ struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
+ struct adv_hwmon_profile *profile = lmsensor_data->profile;
+ struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
+
+ temp = read_ad_value(adv_ec_data, ptbl->vbat[0], ptbl->vbat[1]);
+
+ if (profile->r2 != 0)
+ voltage = temp * (profile->r1 + profile->r2) / profile->r2;
+
+ if (profile->resolution != 0)
+ voltage = temp * profile->resolution / 1000 / 1000;
+
+ if (profile->offset != 0)
+ voltage += (int)profile->offset * 100;
+
+ lmsensor_data->voltage[0] = 10 * voltage;
+
+ *val = lmsensor_data->voltage[0];
+ return 0;
+}
+
+static int get_ec_in_v5_input(struct device *dev, long *val)
+{
+ unsigned int temp;
+ unsigned long voltage = 0;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+
+ struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
+ struct adv_hwmon_profile *profile = lmsensor_data->profile;
+ struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
+
+ temp = read_ad_value(adv_ec_data, ptbl->v5[0], ptbl->v5[1]);
+
+ if (profile->r2 != 0)
+ voltage = temp * (profile->r1 + profile->r2) / profile->r2;
+
+ if (profile->resolution != 0)
+ voltage = temp * profile->resolution / 1000 / 1000;
+
+ if (profile->offset != 0)
+ voltage += (int)profile->offset * 100;
+
+ lmsensor_data->voltage[1] = 10 * voltage;
+
+ *val = lmsensor_data->voltage[1];
+ return 0;
+}
+
+static int get_ec_in_v12_input(struct device *dev, long *val)
+{
+ int temp;
+ unsigned long voltage = 0;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+
+ struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
+ struct adv_hwmon_profile *profile = lmsensor_data->profile;
+ struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
+
+ temp = read_ad_value(adv_ec_data, ptbl->v12[0], ptbl->v12[1]);
+ if (temp == -1)
+ temp = read_ad_value(adv_ec_data, ptbl->vdc[0], ptbl->vdc[1]);
+
+ if (profile->r2 != 0)
+ voltage = temp * (profile->r1 + profile->r2) / profile->r2;
+
+ if (profile->resolution != 0)
+ voltage = temp * profile->resolution / 1000 / 1000;
+
+ if (profile->offset != 0)
+ voltage += profile->offset * 100;
+
+ lmsensor_data->voltage[2] = 10 * voltage;
+
+ *val = lmsensor_data->voltage[2];
+ return 0;
+}
+
+static int get_ec_in_vcore_input(struct device *dev, long *val)
+{
+ int temp;
+ unsigned int voltage = 0;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+
+ struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
+ struct adv_hwmon_profile *profile = lmsensor_data->profile;
+ struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
+
+ temp = read_ad_value(adv_ec_data, ptbl->vcore[0], ptbl->vcore[1]);
+
+ if (profile->r2 != 0)
+ voltage = temp * (profile->r1 + profile->r2) / profile->r2;
+
+ if (profile->resolution != 0)
+ voltage = temp * profile->resolution / 1000 / 1000;
+
+ if (profile->offset != 0)
+ voltage += profile->offset * 100;
+
+ lmsensor_data->voltage[3] = 10 * voltage;
+
+ *val = lmsensor_data->voltage[3];
+ return 0;
+}
+
+static int get_ec_current1_input(struct device *dev, long *val)
+{
+ int temp;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+
+ struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
+ struct adv_hwmon_profile *profile = lmsensor_data->profile;
+ struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
+
+ temp = read_ad_value(adv_ec_data, ptbl->ec_current[0], ptbl->ec_current[1]);
+
+ if (profile->r2 != 0)
+ temp = temp * (profile->r1 + profile->r2) / profile->r2;
+
+ if (profile->resolution != 0)
+ temp = temp * profile->resolution / 1000 / 1000;
+
+ if (profile->offset != 0)
+ temp += profile->offset * 100;
+
+ lmsensor_data->ec_current[3] = 10 * temp;
+
+ *val = lmsensor_data->ec_current[3];
+ return 0;
+}
+
+static int get_ec_cpu_temp(struct device *dev, long *val)
+{
+ #define EC_ACPI_THERMAL1_REMOTE_TEMP 0x61
+
+ unsigned char value;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+ struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
+
+ read_acpi_value(adv_ec_data, EC_ACPI_THERMAL1_REMOTE_TEMP, &value);
+ *val = 1000 * value;
+ return 0;
+}
+
+static int get_ec_sys_temp(struct device *dev, long *val)
+{
+ #define EC_ACPI_THERMAL1_LOCAL_TEMP 0x60
+
+ unsigned char value;
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+ struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
+
+ read_acpi_value(adv_ec_data, EC_ACPI_THERMAL1_LOCAL_TEMP, &value);
+ *val = 1000 * value;
+ return 0;
+}
+
+
+static int
+ahc1ec0_read_in(struct device *dev, u32 attr, int channel, long *val)
+{
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+
+ if (!(lmsensor_data && lmsensor_data->profile))
+ return -EINVAL;
+
+ if (attr == hwmon_in_input &&
+ lmsensor_data->profile->hwmon_in_list_cnt > channel) {
+ int index = lmsensor_data->profile->hwmon_in_list[channel];
+ const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_hwmon_in_attr_template[index];
+
+ return ec_hwmon_attr->read(dev, val);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int
+ahc1ec0_read_temp(struct device *dev, u32 attr, int channel, long *val)
+{
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+
+ if (!(lmsensor_data && lmsensor_data->profile))
+ return -EINVAL;
+
+ switch (attr) {
+ case hwmon_temp_input:
+ if (lmsensor_data->profile->temp_list_cnt > channel) {
+ int index = lmsensor_data->profile->temp_list[channel];
+ const struct ec_hwmon_attrs *devec_hwmon_attr =
+ &ec_temp_attrs_template[index];
+
+ return devec_hwmon_attr->read(dev, val);
+ }
+ return -EOPNOTSUPP;
+ case hwmon_temp_crit:
+ // both CPU temp and System temp are all this value
+ *val = 100000;
+ return 0;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static int
+ahc1ec0_read_string(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr,
+ int channel,
+ const char **str)
+{
+ struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
+
+ if (!(lmsensor_data && lmsensor_data->profile))
+ return -EINVAL;
+
+ if ((type == hwmon_in && attr == hwmon_in_label) &&
+ (lmsensor_data->profile->hwmon_in_list_cnt > channel)) {
+ int index = lmsensor_data->profile->hwmon_in_list[channel];
+ const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_hwmon_in_attr_template[index];
+
+ *str = ec_hwmon_attr->name;
+ return 0;
+ }
+
+ if ((type == hwmon_temp && attr == hwmon_temp_label) &&
+ (lmsensor_data->profile->temp_list_cnt > channel)) {
+ int index = lmsensor_data->profile->temp_list[channel];
+ const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_temp_attrs_template[index];
+
+ *str = ec_hwmon_attr->name;
+ return 0;
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int
+ahc1ec0_read(struct device *dev,
+ enum hwmon_sensor_types type,
+ u32 attr,
+ int channel,
+ long *val)
+{
+ switch (type) {
+ case hwmon_in:
+ return ahc1ec0_read_in(dev, attr, channel, val);
+ case hwmon_temp:
+ return ahc1ec0_read_temp(dev, attr, channel, val);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static umode_t
+ec_hwmon_in_visible(const void *data, u32 attr, int channel)
+{
+ switch (attr) {
+ case hwmon_in_input:
+ case hwmon_in_label:
+ return 0444;
+ default:
+ return 0;
+ }
+}
+
+static umode_t
+ec_temp_in_visible(const void *data, u32 attr, int channel)
+{
+ switch (attr) {
+ case hwmon_temp_input:
+ case hwmon_temp_crit:
+ case hwmon_temp_label:
+ return 0444;
+ default:
+ return 0;
+ }
+}
+
+static umode_t
+ahc1ec0_is_visible(const void *data,
+ enum hwmon_sensor_types type, u32 attr, int channel)
+{
+ switch (type) {
+ case hwmon_in:
+ return ec_hwmon_in_visible(data, attr, channel);
+ case hwmon_temp:
+ return ec_temp_in_visible(data, attr, channel);
+ default:
+ return 0;
+ }
+}
+
+static const u32 ahc1ec0_in_config[] = {
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ HWMON_I_INPUT | HWMON_I_LABEL,
+ 0
+};
+
+static const struct hwmon_channel_info ahc1ec0_in = {
+ .type = hwmon_in,
+ .config = ahc1ec0_in_config,
+};
+
+static const u32 ahc1ec0_temp_config[] = {
+ HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
+ 0
+};
+
+static const struct hwmon_channel_info ahc1ec0_temp = {
+ .type = hwmon_temp,
+ .config = ahc1ec0_temp_config,
+};
+
+static const struct hwmon_channel_info *ahc1ec0_info[] = {
+ &ahc1ec0_in,
+ &ahc1ec0_temp,
+ NULL
+};
+
+static const struct hwmon_ops ahc1ec0_hwmon_ops = {
+ .is_visible = ahc1ec0_is_visible,
+ .read = ahc1ec0_read,
+ .read_string = ahc1ec0_read_string,
+};
+
+static const struct hwmon_chip_info ahc1ec0_chip_info = {
+ .ops = &ahc1ec0_hwmon_ops,
+ .info = ahc1ec0_info,
+};
+
+static int adv_ec_hwmon_probe(struct platform_device *pdev)
+{
+ int ret;
+ u32 profile;
+ struct device *dev = &pdev->dev;
+ struct adv_ec_platform_data *adv_ec_data;
+ struct ec_hwmon_data *lmsensor_data;
+
+ adv_ec_data = dev_get_drvdata(dev->parent);
+ if (!adv_ec_data)
+ return -EINVAL;
+
+ ret = device_property_read_u32(dev->parent, "advantech,hwmon-profile", &profile);
+ if (ret < 0) {
+ dev_err(dev, "get hwmon-profile failed! (%d)", ret);
+ return ret;
+ }
+
+ if (!(profile < ARRAY_SIZE(advec_profile))) {
+ dev_err(dev, "not support hwmon profile(%d)!\n", profile);
+ return -EINVAL;
+ }
+
+ lmsensor_data = devm_kzalloc(dev, sizeof(struct ec_hwmon_data), GFP_KERNEL);
+ if (!lmsensor_data)
+ return -ENOMEM;
+
+ lmsensor_data->adv_ec_data = adv_ec_data;
+ lmsensor_data->dev = dev;
+ dev_set_drvdata(dev, lmsensor_data);
+
+ adv_ec_init_hwmon_profile(profile, lmsensor_data);
+
+ lmsensor_data->hwmon_dev = devm_hwmon_device_register_with_info(dev,
+ "ahc1ec0.hwmon", lmsensor_data, &ahc1ec0_chip_info, NULL);
+
+ return PTR_ERR_OR_ZERO(lmsensor_data->hwmon_dev);
+}
+
+static struct platform_driver adv_hwmon_drv = {
+ .driver = {
+ .name = "ahc1ec0-hwmon",
+ },
+ .probe = adv_ec_hwmon_probe,
+};
+module_platform_driver(adv_hwmon_drv);
+
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_ALIAS("platform:ahc1ec0-hwmon");
+MODULE_DESCRIPTION("Advantech Embedded Controller HWMON Driver.");
+MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
+MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@advantech.com.cn>");
+MODULE_VERSION("1.0");
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* [PATCH v6 6/6] watchdog: ahc1ec0-wdt: Add sub-device watchdog for Advantech embedded controller
2021-01-18 12:37 [PATCH v6 1/6] MAINTAINERS: Add Advantech AHC1EC0 embedded controller entry Campion Kang
` (3 preceding siblings ...)
2021-01-18 12:37 ` [PATCH v6 5/6] hwmon: ahc1ec0-hwmon: Add sub-device hwmon " Campion Kang
@ 2021-01-18 12:37 ` Campion Kang
2021-01-19 7:26 ` AceLan Kao
2021-01-23 17:00 ` Guenter Roeck
4 siblings, 2 replies; 20+ messages in thread
From: Campion Kang @ 2021-01-18 12:37 UTC (permalink / raw)
To: Lee Jones, Rob Herring, linux-kernel, devicetree, Jean Delvare,
Guenter Roeck, Wim Van Sebroeck, linux-hwmon, linux-watchdog,
AceLan Kao, Campion Kang
This is one of sub-device driver for Advantech embedded controller
AHC1EC0. This driver provide watchdog functionality for Advantech
related applications to restart the system.
Changed since V5:
- remove unnecessary header files
- bug fixed: reboot halt if watchdog enabled
- Kconfig: add "AHC1EC0" string to clearly define the EC name
Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
---
drivers/watchdog/Kconfig | 11 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/ahc1ec0-wdt.c | 261 +++++++++++++++++++++++++++++++++
3 files changed, 273 insertions(+)
create mode 100644 drivers/watchdog/ahc1ec0-wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 7ff941e71b79..1a27836883ac 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1636,6 +1636,17 @@ config NIC7018_WDT
To compile this driver as a module, choose M here: the module will be
called nic7018_wdt.
+config AHC1EC0_WDT
+ tristate "Advantech AHC1EC0 Watchdog Function"
+ depends on MFD_AHC1EC0
+ help
+ This is sub-device for Advantech AHC1EC0 embedded controller.
+
+ This driver provide watchdog functionality for Advantech related
+ applications to restart the system.
+ To compile thie driver as a module, choose M here: the module will be
+ called ahc1ec0-wdt.
+
# M68K Architecture
config M54xx_WATCHDOG
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 5c74ee19d441..7190811b1e50 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -145,6 +145,7 @@ obj-$(CONFIG_INTEL_MID_WATCHDOG) += intel-mid_wdt.o
obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o
+obj-$(CONFIG_AHC1EC0_WDT) += ahc1ec0-wdt.o
obj-$(CONFIG_MLX_WDT) += mlx_wdt.o
# M68K Architecture
diff --git a/drivers/watchdog/ahc1ec0-wdt.c b/drivers/watchdog/ahc1ec0-wdt.c
new file mode 100644
index 000000000000..4497b6106b24
--- /dev/null
+++ b/drivers/watchdog/ahc1ec0-wdt.c
@@ -0,0 +1,261 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Watchdog Driver for Advantech Embedded Controller chip AHC1EC0
+ *
+ * Copyright 2020, Advantech IIoT Group
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/mfd/ahc1ec0.h>
+#include <linux/module.h>
+#include <linux/notifier.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#define DRV_NAME "ahc1ec0-wdt"
+
+struct ec_wdt_data {
+ struct watchdog_device wdtdev;
+ struct adv_ec_platform_data *adv_ec_data;
+ struct notifier_block reboot_nb;
+ struct mutex lock_ioctl;
+ int is_enable;
+ int current_timeout;
+};
+
+#define EC_WDT_MIN_TIMEOUT 1 /* The watchdog devices minimum timeout value (in seconds). */
+#define EC_WDT_MAX_TIMEOUT 600 /* The watchdog devices maximum timeout value (in seconds) */
+#define EC_WDT_DEFAULT_TIMEOUT 45
+
+static int set_delay(struct adv_ec_platform_data *adv_ec_data, unsigned short delay_timeout_in_ms)
+{
+ if (write_hw_ram(adv_ec_data, EC_RESET_DELAY_TIME_L, delay_timeout_in_ms & 0x00FF)) {
+ pr_err("Failed to set Watchdog Retset Time Low byte.");
+ return -EINVAL;
+ }
+
+ if (write_hw_ram(adv_ec_data, EC_RESET_DELAY_TIME_H, (delay_timeout_in_ms & 0xFF00) >> 8)) {
+ pr_err("Failed to set Watchdog Retset Time Hight byte.");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int advwdt_set_heartbeat(unsigned long t)
+{
+ if (t < 1 || t > 6553) {
+ pr_err("%s: the input timeout is out of range.", __func__);
+ pr_err("Please choose valid data between 1 ~ 6553.");
+ return -EINVAL;
+ }
+
+ return (t * 10);
+}
+
+/* Notifier for system down */
+static int advwdt_notify_sys(struct notifier_block *nb, unsigned long code, void *data)
+{
+ if (code == SYS_DOWN || code == SYS_HALT) {
+ struct ec_wdt_data *ec_wdt_data;
+
+ ec_wdt_data = container_of(nb, struct ec_wdt_data, reboot_nb);
+ if (!ec_wdt_data)
+ return NOTIFY_BAD;
+
+ /* Turn the WDT off */
+ if (write_hwram_command(ec_wdt_data->adv_ec_data, EC_WDT_STOP)) {
+ pr_err("Failed to set Watchdog stop.");
+ return -EINVAL;
+ }
+ ec_wdt_data->is_enable = 0;
+ pr_info("%s: notify sys shutdown", __func__);
+ }
+
+ return NOTIFY_DONE;
+}
+
+static int ec_wdt_start(struct watchdog_device *wdd)
+{
+ int ret;
+ int timeout, timeout_in_ms;
+ struct ec_wdt_data *ec_wdt_data = watchdog_get_drvdata(wdd);
+ struct adv_ec_platform_data *adv_ec_data;
+
+ dev_dbg(wdd->parent, "%s\n", __func__);
+
+ adv_ec_data = ec_wdt_data->adv_ec_data;
+ timeout = wdd->timeout; /* The watchdog devices timeout value (in seconds). */
+
+ mutex_lock(&ec_wdt_data->lock_ioctl);
+
+ timeout_in_ms = advwdt_set_heartbeat(timeout);
+ if (timeout_in_ms < 0) {
+ mutex_unlock(&ec_wdt_data->lock_ioctl);
+ return timeout_in_ms;
+ }
+
+ ret = set_delay(adv_ec_data, (unsigned short)(timeout_in_ms-1));
+ if (ret) {
+ dev_err(wdd->parent, "Failed to set Watchdog delay (ret=%x).\n", ret);
+ mutex_unlock(&ec_wdt_data->lock_ioctl);
+ return ret;
+ }
+ ret = write_hwram_command(adv_ec_data, EC_WDT_STOP);
+ ret = write_hwram_command(adv_ec_data, EC_WDT_START);
+ if (ret) {
+ dev_err(wdd->parent, "Failed to set Watchdog start (ret=%x).\n", ret);
+ mutex_unlock(&ec_wdt_data->lock_ioctl);
+ return ret;
+ }
+ ec_wdt_data->is_enable = 1;
+ ec_wdt_data->current_timeout = timeout_in_ms/10;
+
+ mutex_unlock(&ec_wdt_data->lock_ioctl);
+ return 0;
+}
+
+static int ec_wdt_stop(struct watchdog_device *wdd)
+{
+ int ret;
+ struct ec_wdt_data *ec_wdt_data = watchdog_get_drvdata(wdd);
+ struct adv_ec_platform_data *adv_ec_data;
+
+ dev_dbg(wdd->parent, "%s\n", __func__);
+
+ adv_ec_data = ec_wdt_data->adv_ec_data;
+
+ mutex_lock(&ec_wdt_data->lock_ioctl);
+ ret = write_hwram_command(adv_ec_data, EC_WDT_STOP);
+ mutex_unlock(&ec_wdt_data->lock_ioctl);
+ if (ret)
+ pr_err("Failed to set Watchdog stop.");
+ else
+ ec_wdt_data->is_enable = 0;
+
+ return ret;
+}
+
+static int ec_wdt_ping(struct watchdog_device *wdd)
+{
+ int ret;
+ struct ec_wdt_data *ec_wdt_data = watchdog_get_drvdata(wdd);
+ struct adv_ec_platform_data *adv_ec_data;
+
+ dev_dbg(wdd->parent, "%s\n", __func__);
+
+ adv_ec_data = ec_wdt_data->adv_ec_data;
+
+ mutex_lock(&ec_wdt_data->lock_ioctl);
+ ret = write_hwram_command(adv_ec_data, EC_WDT_RESET);
+ mutex_unlock(&ec_wdt_data->lock_ioctl);
+ if (ret) {
+ pr_err("Failed to set Watchdog reset.");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int ec_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ dev_dbg(wdd->parent, "%s, timeout=%d\n", __func__, timeout);
+
+ wdd->timeout = timeout;
+
+ if (watchdog_active(wdd))
+ return ec_wdt_start(wdd);
+
+ return 0;
+}
+
+static const struct watchdog_info ec_watchdog_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+ .identity = "AHC1EC0 Watchdog",
+};
+
+static const struct watchdog_ops ec_watchdog_ops = {
+ .owner = THIS_MODULE,
+ .start = ec_wdt_start,
+ .stop = ec_wdt_stop,
+ .ping = ec_wdt_ping,
+ .set_timeout = ec_wdt_set_timeout,
+};
+
+static int adv_ec_wdt_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct device *dev = &pdev->dev;
+ struct adv_ec_platform_data *adv_ec_data;
+ struct ec_wdt_data *ec_wdt_data;
+ struct watchdog_device *wdd;
+
+ dev_info(dev, "watchdog probe start\n");
+
+ adv_ec_data = dev_get_drvdata(dev->parent);
+ if (!adv_ec_data)
+ return -EINVAL;
+
+ ec_wdt_data = devm_kzalloc(dev, sizeof(struct ec_wdt_data), GFP_KERNEL);
+ if (!ec_wdt_data)
+ return -ENOMEM;
+
+ mutex_init(&ec_wdt_data->lock_ioctl);
+
+ ec_wdt_data->adv_ec_data = adv_ec_data;
+ wdd = &ec_wdt_data->wdtdev;
+
+ watchdog_init_timeout(&ec_wdt_data->wdtdev, 0, dev);
+
+ //watchdog_set_nowayout(&ec_wdt_data->wdtdev, WATCHDOG_NOWAYOUT);
+ watchdog_set_drvdata(&ec_wdt_data->wdtdev, ec_wdt_data);
+ platform_set_drvdata(pdev, ec_wdt_data);
+
+ wdd->info = &ec_watchdog_info;
+ wdd->ops = &ec_watchdog_ops;
+ wdd->min_timeout = EC_WDT_MIN_TIMEOUT;
+ wdd->max_timeout = EC_WDT_MAX_TIMEOUT;
+ wdd->parent = dev;
+
+ ec_wdt_data->wdtdev.timeout = EC_WDT_DEFAULT_TIMEOUT;
+ ec_wdt_data->is_enable = 0;
+ ec_wdt_data->current_timeout = EC_WDT_DEFAULT_TIMEOUT;
+
+ watchdog_stop_on_unregister(wdd);
+
+ ec_wdt_data->reboot_nb.notifier_call = advwdt_notify_sys;
+ ret = devm_register_reboot_notifier(dev, &ec_wdt_data->reboot_nb);
+ if (ret) {
+ dev_err(dev, "watchdog%d: Cannot register reboot notifier (%d)\n",
+ wdd->id, ret);
+ return ret;
+ }
+
+ ret = devm_watchdog_register_device(dev, wdd);
+ if (ret != 0)
+ dev_err(dev, "watchdog_register_device() failed: %d\n",
+ ret);
+
+ dev_info(dev, "watchdog register success\n");
+
+ return 0;
+}
+
+static struct platform_driver adv_wdt_drv = {
+ .driver = {
+ .name = DRV_NAME,
+ },
+ .probe = adv_ec_wdt_probe,
+};
+module_platform_driver(adv_wdt_drv);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRV_NAME);
+MODULE_DESCRIPTION("Advantech Embedded Controller Watchdog Driver.");
+MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
+MODULE_VERSION("1.0");
--
2.17.1
^ permalink raw reply related [flat|nested] 20+ messages in thread
* Re: [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller
2021-01-18 12:37 ` [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller Campion Kang
@ 2021-01-19 7:25 ` AceLan Kao
2021-01-19 8:23 ` Lee Jones
2021-03-09 16:07 ` Lee Jones
1 sibling, 1 reply; 20+ messages in thread
From: AceLan Kao @ 2021-01-19 7:25 UTC (permalink / raw)
To: Campion Kang
Cc: Lee Jones, Rob Herring, Linux-Kernel@Vger. Kernel. Org,
devicetree, Jean Delvare, Guenter Roeck, Wim Van Sebroeck,
linux-hwmon, linux-watchdog
Campion Kang <campion.kang@advantech.com.tw> 於 2021年1月18日 週一 下午8:37寫道：
>
> AHC1EC0 is the embedded controller driver for Advantech industrial
> products. This provides sub-devices such as hwmon and watchdog, and also
> expose functions for sub-devices to read/write the value to embedded
> controller.
>
> Changed since V5:
> - Kconfig: add "AHC1EC0" string to clearly define the EC name
> - fix the code according to reviewer's suggestion
> - remove unnecessary header files
> - change the structure name to lower case, align with others
> naming
>
> Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
> ---
> drivers/mfd/Kconfig | 10 +
> drivers/mfd/Makefile | 2 +
> drivers/mfd/ahc1ec0.c | 808 ++++++++++++++++++++++++++++++++++++
> include/linux/mfd/ahc1ec0.h | 276 ++++++++++++
> 4 files changed, 1096 insertions(+)
> create mode 100644 drivers/mfd/ahc1ec0.c
> create mode 100644 include/linux/mfd/ahc1ec0.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index bdfce7b15621..7d5fb5c17d9a 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -2154,5 +2154,15 @@ config MFD_INTEL_M10_BMC
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_AHC1EC0
> + tristate "Advantech AHC1EC0 Embedded Controller Module"
> + depends on X86
> + select MFD_CORE
> + help
> + This is the core function that for Advantech EC drivers. It
> + includes the sub-devices such as hwmon, watchdog, etc. And also
> + provides expose functions for sub-devices to read/write the value
> + to embedded controller.
> +
> endmenu
> endif
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 14fdb188af02..a6af9d8825f4 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -268,3 +268,5 @@ obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
> obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
> obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
> obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
> +
> +obj-$(CONFIG_MFD_AHC1EC0) += ahc1ec0.o
> diff --git a/drivers/mfd/ahc1ec0.c b/drivers/mfd/ahc1ec0.c
> new file mode 100644
> index 000000000000..015f4307a54e
> --- /dev/null
> +++ b/drivers/mfd/ahc1ec0.c
> @@ -0,0 +1,808 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Advantech embedded controller core driver AHC1EC0
> + *
> + * Copyright 2020 Advantech IIoT Group
> + *
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/delay.h>
> +#include <linux/dmi.h>
> +#include <linux/errno.h>
> +#include <linux/mfd/ahc1ec0.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +
> +#define DRV_NAME "ahc1ec0"
> +
> +enum {
> + ADVEC_SUBDEV_BRIGHTNESS = 0,
> + ADVEC_SUBDEV_EEPROM,
> + ADVEC_SUBDEV_GPIO,
> + ADVEC_SUBDEV_HWMON,
> + ADVEC_SUBDEV_LED,
> + ADVEC_SUBDEV_WDT,
> + ADVEC_SUBDEV_MAX,
> +};
> +
> +/* Wait IBF (Input Buffer Full) clear */
> +static int ec_wait_write(void)
> +{
> + int i;
> +
> + for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
> + if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_IBF) == 0)
> + return 0;
> +
> + udelay(EC_RETRY_UDELAY);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +/* Wait OBF (Output Buffer Full) data ready */
> +static int ec_wait_read(void)
> +{
> + int i;
> +
> + for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
> + if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_OBF) != 0)
> + return 0;
> +
> + udelay(EC_RETRY_UDELAY);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +/* Read data from EC HW RAM, the process is the following:
> + * Step 0. Wait IBF clear to send command
> + * Step 1. Send read command to EC command port
> + * Step 2. Wait IBF clear that means command is got by EC
> + * Step 3. Send read address to EC data port
> + * Step 4. Wait OBF data ready
> + * Step 5. Get data from EC data port
> + */
> +int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char *data)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_HW_RAM_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + *data = inb(EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> +
> + return ret;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +
> +/* Write data to EC HW RAM
> + * Step 0. Wait IBF clear to send command
> + * Step 1. Send write command to EC command port
> + * Step 2. Wait IBF clear that means command is got by EC
> + * Step 3. Send write address to EC data port
> + * Step 4. Wait IBF clear that means command is got by EC
> + * Step 5. Send data to EC data port
> + */
> +int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char data)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_HW_RAM_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(data, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> +
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(write_hw_ram);
> +
> +/* Get dynamic control table */
> +static int adv_get_dynamic_tab(struct adv_ec_platform_data *adv_ec_data)
> +{
> + int i, ret;
> + unsigned char pin_tmp, device_id;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + for (i = 0; i < EC_MAX_TBL_NUM; i++) {
> + adv_ec_data->dym_tbl[i].device_id = 0xff;
> + adv_ec_data->dym_tbl[i].hw_pin_num = 0xff;
> + }
> +
> + for (i = 0; i < EC_MAX_TBL_NUM; i++) {
> + ret = ec_wait_write();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + outb(EC_TBL_WRITE_ITEM, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + outb(i, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> +
> + /*
> + * If item is defined, EC will return item number.
> + * If table item is not defined, EC will return 0xFF.
> + */
> + pin_tmp = inb(EC_STATUS_PORT);
> + if (pin_tmp == 0xff) {
> + dev_dbg(adv_ec_data->dev, "%s: inb(EC_STATUS_PORT)=0x%02x != 0xff.\n",
> + __func__, pin_tmp);
> + goto pass;
> + }
> +
> + ret = ec_wait_write();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + outb(EC_TBL_GET_PIN, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + pin_tmp = inb(EC_STATUS_PORT) & 0xff;
> + if (pin_tmp == 0xff) {
> + dev_dbg(adv_ec_data->dev, "%s: pin_tmp(0x%02X). line: %d\n", __func__,
> + pin_tmp, __LINE__);
> + goto pass;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_TBL_GET_DEVID, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + device_id = inb(EC_STATUS_PORT) & 0xff;
> +
> + dev_dbg(adv_ec_data->dev, "%s: device_id=0x%02X. line: %d\n", __func__,
> + device_id, __LINE__);
> +
> + adv_ec_data->dym_tbl[i].device_id = device_id;
> + adv_ec_data->dym_tbl[i].hw_pin_num = pin_tmp;
> + }
> +
> +pass:
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> + __func__, __LINE__);
> + return ret;
> +}
> +
> +int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
> + unsigned char multi)
> +{
> + int ret;
> + u32 ret_val;
> + unsigned int LSB, MSB;
> +
> + mutex_lock(&adv_ec_data->lock);
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_AD_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(hwpin, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_AD_LSB_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + LSB = inb(EC_STATUS_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_AD_MSB_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + MSB = inb(EC_STATUS_PORT);
> + ret_val = ((MSB << 8) | LSB) & 0x03FF;
> + ret_val = ret_val * multi * 100;
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return ret_val;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(read_ad_value);
> +
> +int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char *pvalue)
> +{
> + int ret;
> + unsigned char value;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_ACPI_RAM_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + value = inb(EC_STATUS_PORT);
> + *pvalue = value;
> +
> + mutex_unlock(&adv_ec_data->lock);
> +
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(read_acpi_value);
> +
> +int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char value)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_ACPI_DATA_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(value, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +
> +int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue)
> +{
> + int ret;
> +
> + unsigned char gpio_status_value;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
> + mutex_unlock(&adv_ec_data->lock);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_STATUS_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + gpio_status_value = inb(EC_STATUS_PORT);
> +
> + *pvalue = gpio_status_value;
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> + return ret;
> +}
> +
> +int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_STATUS_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(value, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +
> +int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue)
> +{
> + int ret;
> + unsigned char gpio_dir_value;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
> + __LINE__);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_DIR_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + gpio_dir_value = inb(EC_STATUS_PORT);
> + *pvalue = gpio_dir_value;
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +
> +int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + dev_warn(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
> + __LINE__);
> +
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_DIR_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(value, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +
> +int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(data, EC_COMMAND_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(write_hwram_command);
> +
> +static int adv_ec_get_productname(struct adv_ec_platform_data *adv_ec_data, char *product)
> +{
> + const char *vendor, *device;
> + int length = 0;
> +
> + /* Check it is Advantech board */
> + vendor = dmi_get_system_info(DMI_SYS_VENDOR);
> + if (memcmp(vendor, "Advantech", sizeof("Advantech")) != 0)
> + return -ENODEV;
> +
> + /* Get product model name */
> + device = dmi_get_system_info(DMI_PRODUCT_NAME);
> + if (device) {
> + while ((device[length] != ' ')
> + && (length < AMI_ADVANTECH_BOARD_ID_LENGTH))
> + length++;
> + memset(product, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
> + memmove(product, device, length);
> +
> + dev_info(adv_ec_data->dev, "BIOS Product Name = %s\n", product);
> +
> + return 0;
> + }
> +
> + dev_warn(adv_ec_data->dev, "This device is not Advantech Board (%s)!\n", product);
> +
> + return -ENODEV;
> +}
> +
> +static const struct mfd_cell adv_ec_sub_cells[] = {
> + { .name = "adv-ec-brightness", },
> + { .name = "adv-ec-eeprom", },
> + { .name = "adv-ec-gpio", },
> + { .name = "ahc1ec0-hwmon", },
> + { .name = "adv-ec-led", },
> + { .name = "ahc1ec0-wdt", },
> +};
> +
> +static int adv_ec_init_ec_data(struct adv_ec_platform_data *adv_ec_data)
> +{
> + int ret;
> +
> + adv_ec_data->sub_dev_mask = 0;
> + adv_ec_data->sub_dev_nb = 0;
> + adv_ec_data->dym_tbl = NULL;
> + adv_ec_data->bios_product_name = NULL;
> +
> + mutex_init(&adv_ec_data->lock);
> +
> + /* Get product name */
> + adv_ec_data->bios_product_name =
> + devm_kzalloc(adv_ec_data->dev, AMI_ADVANTECH_BOARD_ID_LENGTH, GFP_KERNEL);
> + if (!adv_ec_data->bios_product_name)
> + return -ENOMEM;
> +
> + memset(adv_ec_data->bios_product_name, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
> + ret = adv_ec_get_productname(adv_ec_data, adv_ec_data->bios_product_name);
> + if (ret)
> + return ret;
> +
> + /* Get pin table */
> + adv_ec_data->dym_tbl = devm_kzalloc(adv_ec_data->dev,
> + EC_MAX_TBL_NUM * sizeof(struct ec_dynamic_table),
> + GFP_KERNEL);
> + if (!adv_ec_data->dym_tbl)
> + return -ENOMEM;
> +
> + ret = adv_get_dynamic_tab(adv_ec_data);
> +
> + return ret;
> +}
> +
> +static int adv_ec_parse_prop(struct adv_ec_platform_data *adv_ec_data)
> +{
> + int i, ret;
> + u32 nb, sub_dev[ADVEC_SUBDEV_MAX];
> +
> + ret = device_property_read_u32(adv_ec_data->dev, "advantech,sub-dev-nb", &nb);
> + if (ret < 0) {
> + dev_err(adv_ec_data->dev, "get sub-dev-nb failed! (%d)\n", ret);
> + return ret;
> + }
> + adv_ec_data->sub_dev_nb = nb;
> +
> + ret = device_property_read_u32_array(adv_ec_data->dev, "advantech,sub-dev",
> + sub_dev, nb);
> + if (ret < 0) {
> + dev_err(adv_ec_data->dev, "get sub-dev failed! (%d)\n", ret);
> + return ret;
> + }
> +
> + for (i = 0; i < nb; i++) {
> + switch (sub_dev[i]) {
> + case ADVEC_SUBDEV_BRIGHTNESS:
> + case ADVEC_SUBDEV_EEPROM:
> + case ADVEC_SUBDEV_GPIO:
> + case ADVEC_SUBDEV_HWMON:
> + case ADVEC_SUBDEV_LED:
> + case ADVEC_SUBDEV_WDT:
> + adv_ec_data->sub_dev_mask |= BIT(sub_dev[i]);
> + break;
> + default:
> + dev_err(adv_ec_data->dev, "invalid prop value(%d)!\n",
> + sub_dev[i]);
> + }
> + }
> + dev_info(adv_ec_data->dev, "sub-dev mask = 0x%x\n", adv_ec_data->sub_dev_mask);
> +
> + return 0;
> +}
> +
> +static int adv_ec_probe(struct platform_device *pdev)
> +{
> + int ret, i;
> + struct device *dev = &pdev->dev;
> + struct adv_ec_platform_data *adv_ec_data;
> +
> + adv_ec_data = devm_kzalloc(dev, sizeof(struct adv_ec_platform_data), GFP_KERNEL);
> + if (!adv_ec_data)
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, adv_ec_data);
> + adv_ec_data->dev = dev;
> +
> + ret = adv_ec_init_ec_data(adv_ec_data);
> + if (ret)
> + goto err_init_data;
> +
> + ret = adv_ec_parse_prop(adv_ec_data);
> + if (ret)
> + goto err_prop;
> +
> + /* check whether this EC has the following subdevices. */
> + for (i = 0; i < ARRAY_SIZE(adv_ec_sub_cells); i++) {
> + if (adv_ec_data->sub_dev_mask & BIT(i)) {
> + ret = mfd_add_hotplug_devices(dev, &adv_ec_sub_cells[i], 1);
> + dev_info(adv_ec_data->dev, "mfd_add_hotplug_devices[%d] %s\n", i,
> + adv_ec_sub_cells[i].name);
> + if (ret)
> + dev_err(dev, "failed to add %s subdevice: %d\n",
> + adv_ec_sub_cells[i].name, ret);
> + }
> + }
> +
> + dev_info(adv_ec_data->dev, "Advantech EC probe done");
> +
> + return 0;
> +
> +err_prop:
> + dev_err(dev, "failed to probe\n");
> +
> +err_init_data:
> + mutex_destroy(&adv_ec_data->lock);
> +
> + dev_err(dev, "failed to init data\n");
> +
> + return ret;
> +}
> +
> +static int adv_ec_remove(struct platform_device *pdev)
> +{
> + struct adv_ec_platform_data *adv_ec_data;
> +
> + adv_ec_data = dev_get_drvdata(&pdev->dev);
> +
> + mutex_destroy(&adv_ec_data->lock);
> +
> + mfd_remove_devices(&pdev->dev);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id adv_ec_of_match[] __maybe_unused = {
> + {
> + .compatible = "advantech,ahc1ec0",
> + },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, adv_ec_of_match);
> +
> +static const struct acpi_device_id adv_ec_acpi_match[] __maybe_unused = {
> + {"AHC1EC0", 0},
> + {},
> +};
> +MODULE_DEVICE_TABLE(acpi, adv_ec_acpi_match);
> +
> +static struct platform_driver adv_ec_driver = {
> + .driver = {
> + .name = DRV_NAME,
> + .of_match_table = of_match_ptr(adv_ec_of_match),
> + .acpi_match_table = ACPI_PTR(adv_ec_acpi_match),
> + },
> + .probe = adv_ec_probe,
> + .remove = adv_ec_remove,
> +};
> +module_platform_driver(adv_ec_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:" DRV_NAME);
> +MODULE_DESCRIPTION("Advantech Embedded Controller core driver.");
> +MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
> +MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@advantech.com.cn>");
> +MODULE_VERSION("1.0");
> diff --git a/include/linux/mfd/ahc1ec0.h b/include/linux/mfd/ahc1ec0.h
> new file mode 100644
> index 000000000000..1b01e10c1fef
> --- /dev/null
> +++ b/include/linux/mfd/ahc1ec0.h
> @@ -0,0 +1,276 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +#ifndef __LINUX_MFD_AHC1EC0_H
> +#define __LINUX_MFD_AHC1EC0_H
> +
> +#include <linux/device.h>
> +
> +#define EC_COMMAND_PORT 0x29A /* EC I/O command port */
> +#define EC_STATUS_PORT 0x299 /* EC I/O data port */
> +
> +#define EC_RETRY_UDELAY 200 /* EC command retry delay in microseconds */
> +#define EC_MAX_TIMEOUT_COUNT 5000 /* EC command max retry count */
> +#define EC_COMMAND_BIT_OBF 0x01 /* Bit 0 is for OBF ready (Output buffer full) */
> +#define EC_COMMAND_BIT_IBF 0x02 /* Bit 1 is for IBF ready (Input buffer full) */
> +
> +/* Analog to digital converter command */
> +#define EC_AD_INDEX_WRITE 0x15 /* Write ADC port number into index */
> +#define EC_AD_LSB_READ 0x16 /* Read ADC LSB value from ADC port */
> +#define EC_AD_MSB_READ 0x1F /* Read ADC MSB value from ADC port */
> +
> +/* Voltage device ID */
> +#define EC_DID_SMBOEM0 0x28 /* SMBUS/I2C. Smbus channel 0 */
> +#define EC_DID_CMOSBAT 0x50 /* CMOS coin battery voltage */
> +#define EC_DID_CMOSBAT_X2 0x51 /* CMOS coin battery voltage*2 */
> +#define EC_DID_CMOSBAT_X10 0x52 /* CMOS coin battery voltage*10 */
> +#define EC_DID_5VS0 0x56 /* 5VS0 voltage */
> +#define EC_DID_5VS0_X2 0x57 /* 5VS0 voltage*2 */
> +#define EC_DID_5VS0_X10 0x58 /* 5VS0 voltage*10 */
> +#define EC_DID_5VS5 0x59 /* 5VS5 voltage */
> +#define EC_DID_5VS5_X2 0x5A /* 5VS5 voltage*2 */
> +#define EC_DID_5VS5_X10 0x5B /* 5VS5 voltage*10 */
> +#define EC_DID_12VS0 0x62 /* 12VS0 voltage */
> +#define EC_DID_12VS0_X2 0x63 /* 12VS0 voltage*2 */
> +#define EC_DID_12VS0_X10 0x64 /* 12VS0 voltage*10 */
> +#define EC_DID_VCOREA 0x65 /* CPU A core voltage */
> +#define EC_DID_VCOREA_X2 0x66 /* CPU A core voltage*2 */
> +#define EC_DID_VCOREA_X10 0x67 /* CPU A core voltage*10 */
> +#define EC_DID_VCOREB 0x68 /* CPU B core voltage */
> +#define EC_DID_VCOREB_X2 0x69 /* CPU B core voltage*2 */
> +#define EC_DID_VCOREB_X10 0x6A /* CPU B core voltage*10 */
> +#define EC_DID_DC 0x6B /* ADC. onboard voltage */
> +#define EC_DID_DC_X2 0x6C /* ADC. onboard voltage*2 */
> +#define EC_DID_DC_X10 0x6D /* ADC. onboard voltage*10 */
> +
> +/* Current device ID */
> +#define EC_DID_CURRENT 0x74
> +
> +/* ACPI commands */
> +#define EC_ACPI_RAM_READ 0x80
> +#define EC_ACPI_RAM_WRITE 0x81
> +
> +/*
> + * Dynamic control table commands
> + * The table includes HW pin number, Device ID, and Pin polarity
> + */
> +#define EC_TBL_WRITE_ITEM 0x20
> +#define EC_TBL_GET_PIN 0x21
> +#define EC_TBL_GET_DEVID 0x22
> +#define EC_MAX_TBL_NUM 32
> +
> +/* LED Device ID table */
> +#define EC_DID_LED_RUN 0xE1
> +#define EC_DID_LED_ERR 0xE2
> +#define EC_DID_LED_SYS_RECOVERY 0xE3
> +#define EC_DID_LED_D105_G 0xE4
> +#define EC_DID_LED_D106_G 0xE5
> +#define EC_DID_LED_D107_G 0xE6
> +
> +/* LED control HW RAM address 0xA0-0xAF */
> +#define EC_HWRAM_LED_BASE_ADDR 0xA0
> +#define EC_HWRAM_LED_PIN(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N))) // N:0-3
> +#define EC_HWRAM_LED_CTRL_HIBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 1)
> +#define EC_HWRAM_LED_CTRL_LOBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 2)
> +#define EC_HWRAM_LED_DEVICE_ID(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 3)
> +
> +/* LED control bit */
> +#define LED_CTRL_ENABLE_BIT() BIT(4)
> +#define LED_CTRL_INTCTL_BIT() BIT(5)
> +#define LED_CTRL_LEDBIT_MASK (0x03FF << 6)
> +#define LED_CTRL_POLARITY_MASK (0x000F << 0)
> +#define LED_CTRL_INTCTL_EXTERNAL 0
> +#define LED_CTRL_INTCTL_INTERNAL 1
> +
> +#define LED_DISABLE 0x0
> +#define LED_ON 0x1
> +#define LED_FAST 0x3
> +#define LED_NORMAL 0x5
> +#define LED_SLOW 0x7
> +#define LED_MANUAL 0xF
> +
> +#define LED_CTRL_LEDBIT_DISABLE 0x0000
> +#define LED_CTRL_LEDBIT_ON 0x03FF
> +#define LED_CTRL_LEDBIT_FAST 0x02AA
> +#define LED_CTRL_LEDBIT_NORMAL 0x0333
> +#define LED_CTRL_LEDBIT_SLOW 0x03E0
> +
> +/* Get the device name */
> +#define AMI_ADVANTECH_BOARD_ID_LENGTH 32
> +
> +/*
> + * Advantech Embedded Controller watchdog commands
> + * EC can send multi-stage watchdog event. System can setup watchdog event
> + * independently to make up event sequence.
> + */
> +#define EC_COMMANS_PORT_IBF_MASK 0x02
> +#define EC_RESET_EVENT 0x04
> +#define EC_WDT_START 0x28
> +#define EC_WDT_STOP 0x29
> +#define EC_WDT_RESET 0x2A
> +#define EC_WDT_BOOTTMEWDT_STOP 0x2B
> +
> +#define EC_HW_RAM 0x89
> +
> +#define EC_EVENT_FLAG 0x57
> +#define EC_ENABLE_DELAY_H 0x58
> +#define EC_ENABLE_DELAY_L 0x59
> +#define EC_POWER_BTN_TIME_H 0x5A
> +#define EC_POWER_BTN_TIME_L 0x5B
> +#define EC_RESET_DELAY_TIME_H 0x5E
> +#define EC_RESET_DELAY_TIME_L 0x5F
> +#define EC_PIN_DELAY_TIME_H 0x60
> +#define EC_PIN_DELAY_TIME_L 0x61
> +#define EC_SCI_DELAY_TIME_H 0x62
> +#define EC_SCI_DELAY_TIME_L 0x63
> +
> +/* EC ACPI commands */
> +#define EC_ACPI_DATA_READ 0x80
> +#define EC_ACPI_DATA_WRITE 0x81
> +
> +/* Brightness ACPI Addr */
> +#define BRIGHTNESS_ACPI_ADDR 0x50
> +
> +/* EC HW RAM commands */
> +#define EC_HW_EXTEND_RAM_READ 0x86
> +#define EC_HW_EXTEND_RAM_WRITE 0x87
> +#define EC_HW_RAM_READ 0x88
> +#define EC_HW_RAM_WRITE 0x89
> +
> +/* EC Smbus commands */
> +#define EC_SMBUS_CHANNEL_SET 0x8A /* Set selector number (SMBUS channel) */
> +#define EC_SMBUS_ENABLE_I2C 0x8C /* Enable channel I2C */
> +#define EC_SMBUS_DISABLE_I2C 0x8D /* Disable channel I2C */
> +
> +/* Smbus transmit protocol */
> +#define EC_SMBUS_PROTOCOL 0x00
> +
> +/* SMBUS status */
> +#define EC_SMBUS_STATUS 0x01
> +
> +/* SMBUS device slave address (bit0 must be 0) */
> +#define EC_SMBUS_SLV_ADDR 0x02
> +
> +/* SMBUS device command */
> +#define EC_SMBUS_CMD 0x03
> +
> +/* 0x04-0x24 Data In read process, return data are stored in this address */
> +#define EC_SMBUS_DATA 0x04
> +
> +#define EC_SMBUS_DAT_OFFSET(n) (EC_SMBUS_DATA + (n))
> +
> +/* SMBUS channel selector (0-4) */
> +#define EC_SMBUS_CHANNEL 0x2B
> +
> +/* EC SMBUS transmit Protocol code */
> +#define SMBUS_QUICK_WRITE 0x02 /* Write Quick Command */
> +#define SMBUS_QUICK_READ 0x03 /* Read Quick Command */
> +#define SMBUS_BYTE_SEND 0x04 /* Send Byte */
> +#define SMBUS_BYTE_RECEIVE 0x05 /* Receive Byte */
> +#define SMBUS_BYTE_WRITE 0x06 /* Write Byte */
> +#define SMBUS_BYTE_READ 0x07 /* Read Byte */
> +#define SMBUS_WORD_WRITE 0x08 /* Write Word */
> +#define SMBUS_WORD_READ 0x09 /* Read Word */
> +#define SMBUS_BLOCK_WRITE 0x0A /* Write Block */
> +#define SMBUS_BLOCK_READ 0x0B /* Read Block */
> +#define SMBUS_PROC_CALL 0x0C /* Process Call */
> +#define SMBUS_BLOCK_PROC_CALL 0x0D /* Write Block-Read Block Process Call */
> +#define SMBUS_I2C_READ_WRITE 0x0E /* I2C block Read-Write */
> +#define SMBUS_I2C_WRITE_READ 0x0F /* I2C block Write-Read */
> +
> +/* GPIO control commands */
> +#define EC_GPIO_INDEX_WRITE 0x10
> +#define EC_GPIO_STATUS_READ 0x11
> +#define EC_GPIO_STATUS_WRITE 0x12
> +#define EC_GPIO_DIR_READ 0x1D
> +#define EC_GPIO_DIR_WRITE 0x1E
> +
> +/* One Key Recovery commands */
> +#define EC_ONE_KEY_FLAG 0x9C
> +
> +/* ASG OEM commands */
> +#define EC_ASG_OEM 0xEA
> +#define EC_ASG_OEM_READ 0x00
> +#define EC_ASG_OEM_WRITE 0x01
> +#define EC_OEM_POWER_STATUS_VIN1 0X10
> +#define EC_OEM_POWER_STATUS_VIN2 0X11
> +#define EC_OEM_POWER_STATUS_BAT1 0X12
> +#define EC_OEM_POWER_STATUS_BAT2 0X13
> +
> +/* GPIO DEVICE ID */
> +#define EC_DID_ALTGPIO_0 0x10 /* 0x10 AltGpio0 User define gpio */
> +#define EC_DID_ALTGPIO_1 0x11 /* 0x11 AltGpio1 User define gpio */
> +#define EC_DID_ALTGPIO_2 0x12 /* 0x12 AltGpio2 User define gpio */
> +#define EC_DID_ALTGPIO_3 0x13 /* 0x13 AltGpio3 User define gpio */
> +#define EC_DID_ALTGPIO_4 0x14 /* 0x14 AltGpio4 User define gpio */
> +#define EC_DID_ALTGPIO_5 0x15 /* 0x15 AltGpio5 User define gpio */
> +#define EC_DID_ALTGPIO_6 0x16 /* 0x16 AltGpio6 User define gpio */
> +#define EC_DID_ALTGPIO_7 0x17 /* 0x17 AltGpio7 User define gpio */
> +
> +/* Lmsensor Chip Register */
> +#define NSLM96163_CHANNEL 0x02
> +
> +/* NS_LM96163 address 0x98 */
> +#define NSLM96163_ADDR 0x98
> +
> +/* LM96163 index(0x00) Local Temperature (Signed MSB) */
> +#define NSLM96163_LOC_TEMP 0x00
> +
> +/* HWMON registers */
> +#define INA266_REG_VOLTAGE 0x02 /* 1.25mV */
> +#define INA266_REG_POWER 0x03 /* 25mW */
> +#define INA266_REG_CURRENT 0x04 /* 1mA */
> +
> +struct ec_hw_pin_table {
> + unsigned int vbat[2];
> + unsigned int v5[2];
> + unsigned int v12[2];
> + unsigned int vcore[2];
> + unsigned int vdc[2];
> + unsigned int ec_current[2];
> + unsigned int power[2];
> +};
> +
> +struct ec_dynamic_table {
> + unsigned char device_id;
> + unsigned char hw_pin_num;
> +};
> +
> +struct ec_smbuso_em0 {
> + unsigned char hw_pin_num;
> +};
> +
> +struct pled_hw_pin_tbl {
> + unsigned int pled[6];
> +};
> +
> +struct adv_ec_platform_data {
> + char *bios_product_name;
> + int sub_dev_nb;
> + u32 sub_dev_mask;
> + struct mutex lock;
> + struct device *dev;
> + struct class *adv_ec_class;
> +
> + struct ec_dynamic_table *dym_tbl;
> +};
> +
> +int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
> + unsigned char multi);
> +int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char *pvalue);
> +int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char value);
> +int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char *data);
> +int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char data);
> +int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data);
> +int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue);
> +int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value);
> +int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue);
> +int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value);
> +
> +#endif /* __LINUX_MFD_AHC1EC0_H */
> --
> 2.17.1
>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v6 5/6] hwmon: ahc1ec0-hwmon: Add sub-device hwmon for Advantech embedded controller
2021-01-18 12:37 ` [PATCH v6 5/6] hwmon: ahc1ec0-hwmon: Add sub-device hwmon " Campion Kang
@ 2021-01-19 7:26 ` AceLan Kao
2021-01-23 16:35 ` Guenter Roeck
1 sibling, 0 replies; 20+ messages in thread
From: AceLan Kao @ 2021-01-19 7:26 UTC (permalink / raw)
To: Campion Kang
Cc: Lee Jones, Rob Herring, Linux-Kernel@Vger. Kernel. Org,
devicetree, Jean Delvare, Guenter Roeck, Wim Van Sebroeck,
linux-hwmon, linux-watchdog
Campion Kang <campion.kang@advantech.com.tw> 於 2021年1月18日 週一 下午8:37寫道：
>
> This is one of sub-device driver for Advantech embedded controller
> AHC1EC0. This driver provides sysfs ABI for Advantech related
> applications to monitor the system status.
>
> Changed since V5:
> - remove unnecessary header files
> - Using [devm_]hwmon_device_register_with_info() to register
> hwmon driver based on reviewer's suggestion
>
> Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
> ---
> drivers/hwmon/Kconfig | 10 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/ahc1ec0-hwmon.c | 660 ++++++++++++++++++++++++++++++++++
> 3 files changed, 671 insertions(+)
> create mode 100644 drivers/hwmon/ahc1ec0-hwmon.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 1ecf697d8d99..bfa007026679 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -2139,6 +2139,16 @@ config SENSORS_INTEL_M10_BMC_HWMON
> sensors monitor various telemetry data of different components on the
> card, e.g. board temperature, FPGA core temperature/voltage/current.
>
> +config SENSORS_AHC1EC0_HWMON
> + tristate "Advantech AHC1EC0 Hardware Monitor Function"
> + depends on MFD_AHC1EC0
> + help
> + This driver provide support for the hardware monitoring functionality
> + for Advantech AHC1EC0 embedded controller on the board.
> +
> + This driver provides the sysfs attributes for applications to monitor
> + the system status, including system temperatures, voltages, current.
> +
> if ACPI
>
> comment "ACPI drivers"
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 09a86c5e1d29..0c37747e8c4f 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_SENSORS_ADT7411) += adt7411.o
> obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o
> obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
> obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
> +obj-$(CONFIG_SENSORS_AHC1EC0_HWMON) += ahc1ec0-hwmon.o
> obj-$(CONFIG_SENSORS_AMD_ENERGY) += amd_energy.o
> obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
> obj-$(CONFIG_SENSORS_ARM_SCMI) += scmi-hwmon.o
> diff --git a/drivers/hwmon/ahc1ec0-hwmon.c b/drivers/hwmon/ahc1ec0-hwmon.c
> new file mode 100644
> index 000000000000..688f07e6a6e0
> --- /dev/null
> +++ b/drivers/hwmon/ahc1ec0-hwmon.c
> @@ -0,0 +1,660 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * HWMON Driver for Advantech Embedded Controller chip AHC1EC0
> + *
> + * Copyright 2020, Advantech IIoT Group
> + *
> + */
> +
> +#include <linux/device.h>
> +#include <linux/errno.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/hwmon.h>
> +#include <linux/mfd/ahc1ec0.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/string.h>
> +#include <linux/types.h>
> +
> +struct ec_hwmon_attrs {
> + const char *name;
> + umode_t mode;
> + int (*read)(struct device *dev, long *val);
> +};
> +
> +struct adv_hwmon_profile {
> + int offset;
> + unsigned long resolution, resolution_vin, resolution_sys, resolution_curr, resolution_power;
> + unsigned long r1, r1_vin, r1_sys, r1_curr, r1_power;
> + unsigned long r2, r2_vin, r2_sys, r2_curr, r2_power;
> + int hwmon_in_list_cnt;
> + int temp_list_cnt;
> + int *hwmon_in_list;
> + int *temp_list;
> +};
> +
> +struct ec_hwmon_data {
> + struct device *dev;
> + struct device *hwmon_dev;
> + struct adv_ec_platform_data *adv_ec_data;
> + unsigned long temperature[3];
> + unsigned long ec_current[5];
> + unsigned long power[5];
> + unsigned long voltage[7];
> +
> + struct ec_hw_pin_table pin_tbl;
> + struct ec_smbuso_em0 ec_smboem0;
> + struct adv_hwmon_profile *profile;
> +};
> +
> +static int get_ec_in_vbat_input(struct device *dev, long *val);
> +static int get_ec_in_v5_input(struct device *dev, long *val);
> +static int get_ec_in_v12_input(struct device *dev, long *val);
> +static int get_ec_in_vcore_input(struct device *dev, long *val);
> +static int get_ec_current1_input(struct device *dev, long *val);
> +static int get_ec_cpu_temp(struct device *dev, long *val);
> +static int get_ec_sys_temp(struct device *dev, long *val);
> +
> +const struct ec_hwmon_attrs ec_hwmon_in_attr_template[] = {
> + {"VBAT", 0444, get_ec_in_vbat_input}, // in1
> + {"5VSB", 0444, get_ec_in_v5_input}, // in2
> + {"Vin", 0444, get_ec_in_v12_input}, // in3 (== in8)
> + {"VCORE", 0444, get_ec_in_vcore_input}, // in4
> + {"Vin1", 0444, NULL}, // in5
> + {"Vin2", 0444, NULL}, // in6
> + {"System Voltage", 0444, NULL}, // in7
> + {"Current", 0444, get_ec_current1_input},
> +};
> +
> +const struct ec_hwmon_attrs ec_temp_attrs_template[] = {
> + {"CPU Temp", 0444, get_ec_cpu_temp},
> + {"System Temp", 0444, get_ec_sys_temp},
> +};
> +
> +enum ec_hwmon_in_type {
> + EC_HWMON_IN_VBAT,
> + EC_HWMON_IN_5VSB,
> + EC_HWMON_IN_12V,
> + EC_HWMON_IN_VCORE,
> + EC_HWMON_IN_VIN1,
> + EC_HWMON_IN_VIN2,
> + EC_HWMON_IN_SYS_VOL,
> + EC_HWMON_IN_CURRENT,
> +};
> +
> +enum ec_temp_type {
> + EC_TEMP_CPU,
> + EC_TEMP_SYS,
> +};
> +
> +static int hwmon_in_list_0[] = {
> + EC_HWMON_IN_VBAT,
> + EC_HWMON_IN_5VSB,
> + EC_HWMON_IN_12V,
> + EC_HWMON_IN_VCORE,
> + EC_HWMON_IN_CURRENT,
> +};
> +
> +static int hwmon_in_list_1[] = {
> + EC_HWMON_IN_VBAT,
> + EC_HWMON_IN_5VSB,
> + EC_HWMON_IN_12V,
> + EC_HWMON_IN_VCORE,
> +};
> +
> +static int temp_list_0[] = {
> + EC_TEMP_CPU,
> +};
> +
> +static int temp_list_1[] = {
> + EC_TEMP_CPU,
> + EC_TEMP_SYS,
> +};
> +
> +static struct adv_hwmon_profile advec_profile[] = {
> + /*
> + * TPC-8100TR, TPC-651T-E3AE, TPC-1251T-E3AE, TPC-1551T-E3AE,
> + * TPC-1751T-E3AE, TPC-1051WP-E3AE, TPC-1551WP-E3AE, TPC-1581WP-433AE,
> + * TPC-1782H-433AE, UNO-1483G-434AE, UNO-2483G-434AE, UNO-3483G-374AE,
> + * UNO-2473G, UNO-2484G-6???AE, UNO-2484G-7???AE, UNO-3283G-674AE,
> + * UNO-3285G-674AE
> + * [0] AHC1EC0_HWMON_PRO_TEMPLATE
> + */
> + {
> + .resolution = 2929,
> + .r1 = 1912,
> + .r2 = 1000,
> + .offset = 0,
> + .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_0),
> + .temp_list_cnt = ARRAY_SIZE(temp_list_0),
> + .hwmon_in_list = hwmon_in_list_0,
> + .temp_list = temp_list_0,
> + },
> + /*
> + * TPC-B500-6??AE, TPC-5???T-6??AE, TPC-5???W-6??AE, TPC-B200-???AE,
> + * TPC-2???T-???AE, TPC-2???W-???AE
> + * [1] AHC1EC0_HWMON_PRO_TPC5XXX
> + */
> + {
> + .resolution = 2929,
> + .r1 = 1912,
> + .r2 = 1000,
> + .offset = 0,
> + .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
> + .temp_list_cnt = ARRAY_SIZE(temp_list_0),
> + .hwmon_in_list = hwmon_in_list_1,
> + .temp_list = temp_list_0,
> + },
> + /* PR/VR4
> + * [2] AHC1EC0_HWMON_PRO_PRVR4
> + */
> + {
> + .resolution = 2929,
> + .r1 = 1912,
> + .r2 = 1000,
> + .offset = 0,
> + .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
> + .temp_list_cnt = ARRAY_SIZE(temp_list_1),
> + .hwmon_in_list = hwmon_in_list_1,
> + .temp_list = temp_list_1,
> + },
> + /* UNO-2271G-E22AE/E23AE/E022AE/E023AE,UNO-420
> + * [3] AHC1EC0_HWMON_PRO_UNO2271G
> + */
> + {
> + .resolution = 2929,
> + .r1 = 1912,
> + .r2 = 1000,
> + .offset = 0,
> + .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
> + .temp_list_cnt = ARRAY_SIZE(temp_list_0),
> + .hwmon_in_list = hwmon_in_list_1,
> + .temp_list = temp_list_0,
> + },
> +};
> +
> +static void adv_ec_init_hwmon_profile(u32 profile, struct ec_hwmon_data *lmsensor_data)
> +{
> + int i;
> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> + struct ec_dynamic_table *dym_tbl = adv_ec_data->dym_tbl;
> +
> + if (profile >= ARRAY_SIZE(advec_profile))
> + return;
> +
> + lmsensor_data->profile = &advec_profile[profile];
> +
> + for (i = 0; i < EC_MAX_TBL_NUM ; i++) {
> + switch (dym_tbl[i].device_id) {
> + case EC_DID_CMOSBAT:
> + ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vbat[1] = 1;
> + break;
> + case EC_DID_CMOSBAT_X2:
> + ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vbat[1] = 2;
> + break;
> + case EC_DID_CMOSBAT_X10:
> + ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vbat[1] = 10;
> + break;
> + case EC_DID_5VS0:
> + case EC_DID_5VS5:
> + ptbl->v5[0] = dym_tbl[i].hw_pin_num;
> + ptbl->v5[1] = 1;
> + break;
> + case EC_DID_5VS0_X2:
> + case EC_DID_5VS5_X2:
> + ptbl->v5[0] = dym_tbl[i].hw_pin_num;
> + ptbl->v5[1] = 2;
> + break;
> + case EC_DID_5VS0_X10:
> + case EC_DID_5VS5_X10:
> + ptbl->v5[0] = dym_tbl[i].hw_pin_num;
> + ptbl->v5[1] = 10;
> + break;
> + case EC_DID_12VS0:
> + ptbl->v12[0] = dym_tbl[i].hw_pin_num;
> + ptbl->v12[1] = 1;
> + break;
> + case EC_DID_12VS0_X2:
> + ptbl->v12[0] = dym_tbl[i].hw_pin_num;
> + ptbl->v12[1] = 2;
> + break;
> + case EC_DID_12VS0_X10:
> + ptbl->v12[0] = dym_tbl[i].hw_pin_num;
> + ptbl->v12[1] = 10;
> + break;
> + case EC_DID_VCOREA:
> + case EC_DID_VCOREB:
> + ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vcore[1] = 1;
> + break;
> + case EC_DID_VCOREA_X2:
> + case EC_DID_VCOREB_X2:
> + ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vcore[1] = 2;
> + break;
> + case EC_DID_VCOREA_X10:
> + case EC_DID_VCOREB_X10:
> + ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vcore[1] = 10;
> + break;
> + case EC_DID_DC:
> + ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vdc[1] = 1;
> + break;
> + case EC_DID_DC_X2:
> + ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vdc[1] = 2;
> + break;
> + case EC_DID_DC_X10:
> + ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vdc[1] = 10;
> + break;
> + case EC_DID_CURRENT:
> + ptbl->ec_current[0] = dym_tbl[i].hw_pin_num;
> + ptbl->ec_current[1] = 1;
> + break;
> + case EC_DID_SMBOEM0:
> + lmsensor_data->ec_smboem0.hw_pin_num = dym_tbl[i].hw_pin_num;
> + break;
> + default:
> + break;
> + }
> + }
> +}
> +
> +static int get_ec_in_vbat_input(struct device *dev, long *val)
> +{
> + unsigned int temp = 0;
> + unsigned long voltage = 0;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + temp = read_ad_value(adv_ec_data, ptbl->vbat[0], ptbl->vbat[1]);
> +
> + if (profile->r2 != 0)
> + voltage = temp * (profile->r1 + profile->r2) / profile->r2;
> +
> + if (profile->resolution != 0)
> + voltage = temp * profile->resolution / 1000 / 1000;
> +
> + if (profile->offset != 0)
> + voltage += (int)profile->offset * 100;
> +
> + lmsensor_data->voltage[0] = 10 * voltage;
> +
> + *val = lmsensor_data->voltage[0];
> + return 0;
> +}
> +
> +static int get_ec_in_v5_input(struct device *dev, long *val)
> +{
> + unsigned int temp;
> + unsigned long voltage = 0;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + temp = read_ad_value(adv_ec_data, ptbl->v5[0], ptbl->v5[1]);
> +
> + if (profile->r2 != 0)
> + voltage = temp * (profile->r1 + profile->r2) / profile->r2;
> +
> + if (profile->resolution != 0)
> + voltage = temp * profile->resolution / 1000 / 1000;
> +
> + if (profile->offset != 0)
> + voltage += (int)profile->offset * 100;
> +
> + lmsensor_data->voltage[1] = 10 * voltage;
> +
> + *val = lmsensor_data->voltage[1];
> + return 0;
> +}
> +
> +static int get_ec_in_v12_input(struct device *dev, long *val)
> +{
> + int temp;
> + unsigned long voltage = 0;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + temp = read_ad_value(adv_ec_data, ptbl->v12[0], ptbl->v12[1]);
> + if (temp == -1)
> + temp = read_ad_value(adv_ec_data, ptbl->vdc[0], ptbl->vdc[1]);
> +
> + if (profile->r2 != 0)
> + voltage = temp * (profile->r1 + profile->r2) / profile->r2;
> +
> + if (profile->resolution != 0)
> + voltage = temp * profile->resolution / 1000 / 1000;
> +
> + if (profile->offset != 0)
> + voltage += profile->offset * 100;
> +
> + lmsensor_data->voltage[2] = 10 * voltage;
> +
> + *val = lmsensor_data->voltage[2];
> + return 0;
> +}
> +
> +static int get_ec_in_vcore_input(struct device *dev, long *val)
> +{
> + int temp;
> + unsigned int voltage = 0;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + temp = read_ad_value(adv_ec_data, ptbl->vcore[0], ptbl->vcore[1]);
> +
> + if (profile->r2 != 0)
> + voltage = temp * (profile->r1 + profile->r2) / profile->r2;
> +
> + if (profile->resolution != 0)
> + voltage = temp * profile->resolution / 1000 / 1000;
> +
> + if (profile->offset != 0)
> + voltage += profile->offset * 100;
> +
> + lmsensor_data->voltage[3] = 10 * voltage;
> +
> + *val = lmsensor_data->voltage[3];
> + return 0;
> +}
> +
> +static int get_ec_current1_input(struct device *dev, long *val)
> +{
> + int temp;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + temp = read_ad_value(adv_ec_data, ptbl->ec_current[0], ptbl->ec_current[1]);
> +
> + if (profile->r2 != 0)
> + temp = temp * (profile->r1 + profile->r2) / profile->r2;
> +
> + if (profile->resolution != 0)
> + temp = temp * profile->resolution / 1000 / 1000;
> +
> + if (profile->offset != 0)
> + temp += profile->offset * 100;
> +
> + lmsensor_data->ec_current[3] = 10 * temp;
> +
> + *val = lmsensor_data->ec_current[3];
> + return 0;
> +}
> +
> +static int get_ec_cpu_temp(struct device *dev, long *val)
> +{
> + #define EC_ACPI_THERMAL1_REMOTE_TEMP 0x61
> +
> + unsigned char value;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + read_acpi_value(adv_ec_data, EC_ACPI_THERMAL1_REMOTE_TEMP, &value);
> + *val = 1000 * value;
> + return 0;
> +}
> +
> +static int get_ec_sys_temp(struct device *dev, long *val)
> +{
> + #define EC_ACPI_THERMAL1_LOCAL_TEMP 0x60
> +
> + unsigned char value;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + read_acpi_value(adv_ec_data, EC_ACPI_THERMAL1_LOCAL_TEMP, &value);
> + *val = 1000 * value;
> + return 0;
> +}
> +
> +
> +static int
> +ahc1ec0_read_in(struct device *dev, u32 attr, int channel, long *val)
> +{
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + if (!(lmsensor_data && lmsensor_data->profile))
> + return -EINVAL;
> +
> + if (attr == hwmon_in_input &&
> + lmsensor_data->profile->hwmon_in_list_cnt > channel) {
> + int index = lmsensor_data->profile->hwmon_in_list[channel];
> + const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_hwmon_in_attr_template[index];
> +
> + return ec_hwmon_attr->read(dev, val);
> + }
> +
> + return -EOPNOTSUPP;
> +}
> +
> +static int
> +ahc1ec0_read_temp(struct device *dev, u32 attr, int channel, long *val)
> +{
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + if (!(lmsensor_data && lmsensor_data->profile))
> + return -EINVAL;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + if (lmsensor_data->profile->temp_list_cnt > channel) {
> + int index = lmsensor_data->profile->temp_list[channel];
> + const struct ec_hwmon_attrs *devec_hwmon_attr =
> + &ec_temp_attrs_template[index];
> +
> + return devec_hwmon_attr->read(dev, val);
> + }
> + return -EOPNOTSUPP;
> + case hwmon_temp_crit:
> + // both CPU temp and System temp are all this value
> + *val = 100000;
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int
> +ahc1ec0_read_string(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr,
> + int channel,
> + const char **str)
> +{
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + if (!(lmsensor_data && lmsensor_data->profile))
> + return -EINVAL;
> +
> + if ((type == hwmon_in && attr == hwmon_in_label) &&
> + (lmsensor_data->profile->hwmon_in_list_cnt > channel)) {
> + int index = lmsensor_data->profile->hwmon_in_list[channel];
> + const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_hwmon_in_attr_template[index];
> +
> + *str = ec_hwmon_attr->name;
> + return 0;
> + }
> +
> + if ((type == hwmon_temp && attr == hwmon_temp_label) &&
> + (lmsensor_data->profile->temp_list_cnt > channel)) {
> + int index = lmsensor_data->profile->temp_list[channel];
> + const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_temp_attrs_template[index];
> +
> + *str = ec_hwmon_attr->name;
> + return 0;
> + }
> +
> + return -EOPNOTSUPP;
> +}
> +
> +static int
> +ahc1ec0_read(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr,
> + int channel,
> + long *val)
> +{
> + switch (type) {
> + case hwmon_in:
> + return ahc1ec0_read_in(dev, attr, channel, val);
> + case hwmon_temp:
> + return ahc1ec0_read_temp(dev, attr, channel, val);
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static umode_t
> +ec_hwmon_in_visible(const void *data, u32 attr, int channel)
> +{
> + switch (attr) {
> + case hwmon_in_input:
> + case hwmon_in_label:
> + return 0444;
> + default:
> + return 0;
> + }
> +}
> +
> +static umode_t
> +ec_temp_in_visible(const void *data, u32 attr, int channel)
> +{
> + switch (attr) {
> + case hwmon_temp_input:
> + case hwmon_temp_crit:
> + case hwmon_temp_label:
> + return 0444;
> + default:
> + return 0;
> + }
> +}
> +
> +static umode_t
> +ahc1ec0_is_visible(const void *data,
> + enum hwmon_sensor_types type, u32 attr, int channel)
> +{
> + switch (type) {
> + case hwmon_in:
> + return ec_hwmon_in_visible(data, attr, channel);
> + case hwmon_temp:
> + return ec_temp_in_visible(data, attr, channel);
> + default:
> + return 0;
> + }
> +}
> +
> +static const u32 ahc1ec0_in_config[] = {
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + 0
> +};
> +
> +static const struct hwmon_channel_info ahc1ec0_in = {
> + .type = hwmon_in,
> + .config = ahc1ec0_in_config,
> +};
> +
> +static const u32 ahc1ec0_temp_config[] = {
> + HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
> + 0
> +};
> +
> +static const struct hwmon_channel_info ahc1ec0_temp = {
> + .type = hwmon_temp,
> + .config = ahc1ec0_temp_config,
> +};
> +
> +static const struct hwmon_channel_info *ahc1ec0_info[] = {
> + &ahc1ec0_in,
> + &ahc1ec0_temp,
> + NULL
> +};
> +
> +static const struct hwmon_ops ahc1ec0_hwmon_ops = {
> + .is_visible = ahc1ec0_is_visible,
> + .read = ahc1ec0_read,
> + .read_string = ahc1ec0_read_string,
> +};
> +
> +static const struct hwmon_chip_info ahc1ec0_chip_info = {
> + .ops = &ahc1ec0_hwmon_ops,
> + .info = ahc1ec0_info,
> +};
> +
> +static int adv_ec_hwmon_probe(struct platform_device *pdev)
> +{
> + int ret;
> + u32 profile;
> + struct device *dev = &pdev->dev;
> + struct adv_ec_platform_data *adv_ec_data;
> + struct ec_hwmon_data *lmsensor_data;
> +
> + adv_ec_data = dev_get_drvdata(dev->parent);
> + if (!adv_ec_data)
> + return -EINVAL;
> +
> + ret = device_property_read_u32(dev->parent, "advantech,hwmon-profile", &profile);
> + if (ret < 0) {
> + dev_err(dev, "get hwmon-profile failed! (%d)", ret);
> + return ret;
> + }
> +
> + if (!(profile < ARRAY_SIZE(advec_profile))) {
> + dev_err(dev, "not support hwmon profile(%d)!\n", profile);
> + return -EINVAL;
> + }
> +
> + lmsensor_data = devm_kzalloc(dev, sizeof(struct ec_hwmon_data), GFP_KERNEL);
> + if (!lmsensor_data)
> + return -ENOMEM;
> +
> + lmsensor_data->adv_ec_data = adv_ec_data;
> + lmsensor_data->dev = dev;
> + dev_set_drvdata(dev, lmsensor_data);
> +
> + adv_ec_init_hwmon_profile(profile, lmsensor_data);
> +
> + lmsensor_data->hwmon_dev = devm_hwmon_device_register_with_info(dev,
> + "ahc1ec0.hwmon", lmsensor_data, &ahc1ec0_chip_info, NULL);
> +
> + return PTR_ERR_OR_ZERO(lmsensor_data->hwmon_dev);
> +}
> +
> +static struct platform_driver adv_hwmon_drv = {
> + .driver = {
> + .name = "ahc1ec0-hwmon",
> + },
> + .probe = adv_ec_hwmon_probe,
> +};
> +module_platform_driver(adv_hwmon_drv);
> +
> +MODULE_LICENSE("Dual BSD/GPL");
> +MODULE_ALIAS("platform:ahc1ec0-hwmon");
> +MODULE_DESCRIPTION("Advantech Embedded Controller HWMON Driver.");
> +MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
> +MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@advantech.com.cn>");
> +MODULE_VERSION("1.0");
> --
> 2.17.1
>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v6 6/6] watchdog: ahc1ec0-wdt: Add sub-device watchdog for Advantech embedded controller
2021-01-18 12:37 ` [PATCH v6 6/6] watchdog: ahc1ec0-wdt: Add sub-device watchdog " Campion Kang
@ 2021-01-19 7:26 ` AceLan Kao
2021-01-23 17:00 ` Guenter Roeck
1 sibling, 0 replies; 20+ messages in thread
From: AceLan Kao @ 2021-01-19 7:26 UTC (permalink / raw)
To: Campion Kang
Cc: Lee Jones, Rob Herring, Linux-Kernel@Vger. Kernel. Org,
devicetree, Jean Delvare, Guenter Roeck, Wim Van Sebroeck,
linux-hwmon, linux-watchdog
Campion Kang <campion.kang@advantech.com.tw> 於 2021年1月18日 週一 下午8:39寫道：
>
> This is one of sub-device driver for Advantech embedded controller
> AHC1EC0. This driver provide watchdog functionality for Advantech
> related applications to restart the system.
>
> Changed since V5:
> - remove unnecessary header files
> - bug fixed: reboot halt if watchdog enabled
> - Kconfig: add "AHC1EC0" string to clearly define the EC name
>
> Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
> ---
> drivers/watchdog/Kconfig | 11 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/ahc1ec0-wdt.c | 261 +++++++++++++++++++++++++++++++++
> 3 files changed, 273 insertions(+)
> create mode 100644 drivers/watchdog/ahc1ec0-wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 7ff941e71b79..1a27836883ac 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1636,6 +1636,17 @@ config NIC7018_WDT
> To compile this driver as a module, choose M here: the module will be
> called nic7018_wdt.
>
> +config AHC1EC0_WDT
> + tristate "Advantech AHC1EC0 Watchdog Function"
> + depends on MFD_AHC1EC0
> + help
> + This is sub-device for Advantech AHC1EC0 embedded controller.
> +
> + This driver provide watchdog functionality for Advantech related
> + applications to restart the system.
> + To compile thie driver as a module, choose M here: the module will be
> + called ahc1ec0-wdt.
> +
> # M68K Architecture
>
> config M54xx_WATCHDOG
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 5c74ee19d441..7190811b1e50 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -145,6 +145,7 @@ obj-$(CONFIG_INTEL_MID_WATCHDOG) += intel-mid_wdt.o
> obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
> obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
> obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o
> +obj-$(CONFIG_AHC1EC0_WDT) += ahc1ec0-wdt.o
> obj-$(CONFIG_MLX_WDT) += mlx_wdt.o
>
> # M68K Architecture
> diff --git a/drivers/watchdog/ahc1ec0-wdt.c b/drivers/watchdog/ahc1ec0-wdt.c
> new file mode 100644
> index 000000000000..4497b6106b24
> --- /dev/null
> +++ b/drivers/watchdog/ahc1ec0-wdt.c
> @@ -0,0 +1,261 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Watchdog Driver for Advantech Embedded Controller chip AHC1EC0
> + *
> + * Copyright 2020, Advantech IIoT Group
> + *
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/ahc1ec0.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +#include <linux/types.h>
> +#include <linux/watchdog.h>
> +
> +#define DRV_NAME "ahc1ec0-wdt"
> +
> +struct ec_wdt_data {
> + struct watchdog_device wdtdev;
> + struct adv_ec_platform_data *adv_ec_data;
> + struct notifier_block reboot_nb;
> + struct mutex lock_ioctl;
> + int is_enable;
> + int current_timeout;
> +};
> +
> +#define EC_WDT_MIN_TIMEOUT 1 /* The watchdog devices minimum timeout value (in seconds). */
> +#define EC_WDT_MAX_TIMEOUT 600 /* The watchdog devices maximum timeout value (in seconds) */
> +#define EC_WDT_DEFAULT_TIMEOUT 45
> +
> +static int set_delay(struct adv_ec_platform_data *adv_ec_data, unsigned short delay_timeout_in_ms)
> +{
> + if (write_hw_ram(adv_ec_data, EC_RESET_DELAY_TIME_L, delay_timeout_in_ms & 0x00FF)) {
> + pr_err("Failed to set Watchdog Retset Time Low byte.");
> + return -EINVAL;
> + }
> +
> + if (write_hw_ram(adv_ec_data, EC_RESET_DELAY_TIME_H, (delay_timeout_in_ms & 0xFF00) >> 8)) {
> + pr_err("Failed to set Watchdog Retset Time Hight byte.");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int advwdt_set_heartbeat(unsigned long t)
> +{
> + if (t < 1 || t > 6553) {
> + pr_err("%s: the input timeout is out of range.", __func__);
> + pr_err("Please choose valid data between 1 ~ 6553.");
> + return -EINVAL;
> + }
> +
> + return (t * 10);
> +}
> +
> +/* Notifier for system down */
> +static int advwdt_notify_sys(struct notifier_block *nb, unsigned long code, void *data)
> +{
> + if (code == SYS_DOWN || code == SYS_HALT) {
> + struct ec_wdt_data *ec_wdt_data;
> +
> + ec_wdt_data = container_of(nb, struct ec_wdt_data, reboot_nb);
> + if (!ec_wdt_data)
> + return NOTIFY_BAD;
> +
> + /* Turn the WDT off */
> + if (write_hwram_command(ec_wdt_data->adv_ec_data, EC_WDT_STOP)) {
> + pr_err("Failed to set Watchdog stop.");
> + return -EINVAL;
> + }
> + ec_wdt_data->is_enable = 0;
> + pr_info("%s: notify sys shutdown", __func__);
> + }
> +
> + return NOTIFY_DONE;
> +}
> +
> +static int ec_wdt_start(struct watchdog_device *wdd)
> +{
> + int ret;
> + int timeout, timeout_in_ms;
> + struct ec_wdt_data *ec_wdt_data = watchdog_get_drvdata(wdd);
> + struct adv_ec_platform_data *adv_ec_data;
> +
> + dev_dbg(wdd->parent, "%s\n", __func__);
> +
> + adv_ec_data = ec_wdt_data->adv_ec_data;
> + timeout = wdd->timeout; /* The watchdog devices timeout value (in seconds). */
> +
> + mutex_lock(&ec_wdt_data->lock_ioctl);
> +
> + timeout_in_ms = advwdt_set_heartbeat(timeout);
> + if (timeout_in_ms < 0) {
> + mutex_unlock(&ec_wdt_data->lock_ioctl);
> + return timeout_in_ms;
> + }
> +
> + ret = set_delay(adv_ec_data, (unsigned short)(timeout_in_ms-1));
> + if (ret) {
> + dev_err(wdd->parent, "Failed to set Watchdog delay (ret=%x).\n", ret);
> + mutex_unlock(&ec_wdt_data->lock_ioctl);
> + return ret;
> + }
> + ret = write_hwram_command(adv_ec_data, EC_WDT_STOP);
> + ret = write_hwram_command(adv_ec_data, EC_WDT_START);
> + if (ret) {
> + dev_err(wdd->parent, "Failed to set Watchdog start (ret=%x).\n", ret);
> + mutex_unlock(&ec_wdt_data->lock_ioctl);
> + return ret;
> + }
> + ec_wdt_data->is_enable = 1;
> + ec_wdt_data->current_timeout = timeout_in_ms/10;
> +
> + mutex_unlock(&ec_wdt_data->lock_ioctl);
> + return 0;
> +}
> +
> +static int ec_wdt_stop(struct watchdog_device *wdd)
> +{
> + int ret;
> + struct ec_wdt_data *ec_wdt_data = watchdog_get_drvdata(wdd);
> + struct adv_ec_platform_data *adv_ec_data;
> +
> + dev_dbg(wdd->parent, "%s\n", __func__);
> +
> + adv_ec_data = ec_wdt_data->adv_ec_data;
> +
> + mutex_lock(&ec_wdt_data->lock_ioctl);
> + ret = write_hwram_command(adv_ec_data, EC_WDT_STOP);
> + mutex_unlock(&ec_wdt_data->lock_ioctl);
> + if (ret)
> + pr_err("Failed to set Watchdog stop.");
> + else
> + ec_wdt_data->is_enable = 0;
> +
> + return ret;
> +}
> +
> +static int ec_wdt_ping(struct watchdog_device *wdd)
> +{
> + int ret;
> + struct ec_wdt_data *ec_wdt_data = watchdog_get_drvdata(wdd);
> + struct adv_ec_platform_data *adv_ec_data;
> +
> + dev_dbg(wdd->parent, "%s\n", __func__);
> +
> + adv_ec_data = ec_wdt_data->adv_ec_data;
> +
> + mutex_lock(&ec_wdt_data->lock_ioctl);
> + ret = write_hwram_command(adv_ec_data, EC_WDT_RESET);
> + mutex_unlock(&ec_wdt_data->lock_ioctl);
> + if (ret) {
> + pr_err("Failed to set Watchdog reset.");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int ec_wdt_set_timeout(struct watchdog_device *wdd,
> + unsigned int timeout)
> +{
> + dev_dbg(wdd->parent, "%s, timeout=%d\n", __func__, timeout);
> +
> + wdd->timeout = timeout;
> +
> + if (watchdog_active(wdd))
> + return ec_wdt_start(wdd);
> +
> + return 0;
> +}
> +
> +static const struct watchdog_info ec_watchdog_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "AHC1EC0 Watchdog",
> +};
> +
> +static const struct watchdog_ops ec_watchdog_ops = {
> + .owner = THIS_MODULE,
> + .start = ec_wdt_start,
> + .stop = ec_wdt_stop,
> + .ping = ec_wdt_ping,
> + .set_timeout = ec_wdt_set_timeout,
> +};
> +
> +static int adv_ec_wdt_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct device *dev = &pdev->dev;
> + struct adv_ec_platform_data *adv_ec_data;
> + struct ec_wdt_data *ec_wdt_data;
> + struct watchdog_device *wdd;
> +
> + dev_info(dev, "watchdog probe start\n");
> +
> + adv_ec_data = dev_get_drvdata(dev->parent);
> + if (!adv_ec_data)
> + return -EINVAL;
> +
> + ec_wdt_data = devm_kzalloc(dev, sizeof(struct ec_wdt_data), GFP_KERNEL);
> + if (!ec_wdt_data)
> + return -ENOMEM;
> +
> + mutex_init(&ec_wdt_data->lock_ioctl);
> +
> + ec_wdt_data->adv_ec_data = adv_ec_data;
> + wdd = &ec_wdt_data->wdtdev;
> +
> + watchdog_init_timeout(&ec_wdt_data->wdtdev, 0, dev);
> +
> + //watchdog_set_nowayout(&ec_wdt_data->wdtdev, WATCHDOG_NOWAYOUT);
> + watchdog_set_drvdata(&ec_wdt_data->wdtdev, ec_wdt_data);
> + platform_set_drvdata(pdev, ec_wdt_data);
> +
> + wdd->info = &ec_watchdog_info;
> + wdd->ops = &ec_watchdog_ops;
> + wdd->min_timeout = EC_WDT_MIN_TIMEOUT;
> + wdd->max_timeout = EC_WDT_MAX_TIMEOUT;
> + wdd->parent = dev;
> +
> + ec_wdt_data->wdtdev.timeout = EC_WDT_DEFAULT_TIMEOUT;
> + ec_wdt_data->is_enable = 0;
> + ec_wdt_data->current_timeout = EC_WDT_DEFAULT_TIMEOUT;
> +
> + watchdog_stop_on_unregister(wdd);
> +
> + ec_wdt_data->reboot_nb.notifier_call = advwdt_notify_sys;
> + ret = devm_register_reboot_notifier(dev, &ec_wdt_data->reboot_nb);
> + if (ret) {
> + dev_err(dev, "watchdog%d: Cannot register reboot notifier (%d)\n",
> + wdd->id, ret);
> + return ret;
> + }
> +
> + ret = devm_watchdog_register_device(dev, wdd);
> + if (ret != 0)
> + dev_err(dev, "watchdog_register_device() failed: %d\n",
> + ret);
> +
> + dev_info(dev, "watchdog register success\n");
> +
> + return 0;
> +}
> +
> +static struct platform_driver adv_wdt_drv = {
> + .driver = {
> + .name = DRV_NAME,
> + },
> + .probe = adv_ec_wdt_probe,
> +};
> +module_platform_driver(adv_wdt_drv);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:" DRV_NAME);
> +MODULE_DESCRIPTION("Advantech Embedded Controller Watchdog Driver.");
> +MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
> +MODULE_VERSION("1.0");
> --
> 2.17.1
>
Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller
2021-01-19 7:25 ` AceLan Kao
@ 2021-01-19 8:23 ` Lee Jones
0 siblings, 0 replies; 20+ messages in thread
From: Lee Jones @ 2021-01-19 8:23 UTC (permalink / raw)
To: AceLan Kao
Cc: Campion Kang, Rob Herring, Linux-Kernel@Vger. Kernel. Org,
devicetree, Jean Delvare, Guenter Roeck, Wim Van Sebroeck,
linux-hwmon, linux-watchdog
On Tue, 19 Jan 2021, AceLan Kao wrote:
> Campion Kang <campion.kang@advantech.com.tw> 於 2021年1月18日 週一 下午8:37寫道：
> >
> > AHC1EC0 is the embedded controller driver for Advantech industrial
> > products. This provides sub-devices such as hwmon and watchdog, and also
> > expose functions for sub-devices to read/write the value to embedded
> > controller.
> >
> > Changed since V5:
> > - Kconfig: add "AHC1EC0" string to clearly define the EC name
> > - fix the code according to reviewer's suggestion
> > - remove unnecessary header files
> > - change the structure name to lower case, align with others
> > naming
> >
> > Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
> > ---
> > drivers/mfd/Kconfig | 10 +
> > drivers/mfd/Makefile | 2 +
> > drivers/mfd/ahc1ec0.c | 808 ++++++++++++++++++++++++++++++++++++
> > include/linux/mfd/ahc1ec0.h | 276 ++++++++++++
> > 4 files changed, 1096 insertions(+)
> > create mode 100644 drivers/mfd/ahc1ec0.c
> > create mode 100644 include/linux/mfd/ahc1ec0.h
[...]
NB: Snipped 1000 lines.
> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Would you be kind enough to snip your replies please AceLan?
It would have the benefit of saving a lot of people a little time.
TIA.
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v6 5/6] hwmon: ahc1ec0-hwmon: Add sub-device hwmon for Advantech embedded controller
2021-01-18 12:37 ` [PATCH v6 5/6] hwmon: ahc1ec0-hwmon: Add sub-device hwmon " Campion Kang
2021-01-19 7:26 ` AceLan Kao
@ 2021-01-23 16:35 ` Guenter Roeck
[not found] ` <66338d379bb14c2fbd8a6507075384ce@Taipei11.ADVANTECH.CORP>
1 sibling, 1 reply; 20+ messages in thread
From: Guenter Roeck @ 2021-01-23 16:35 UTC (permalink / raw)
To: Campion Kang
Cc: Lee Jones, Rob Herring, linux-kernel, devicetree, Jean Delvare,
Wim Van Sebroeck, linux-hwmon, linux-watchdog, AceLan Kao
On Mon, Jan 18, 2021 at 08:37:48PM +0800, Campion Kang wrote:
> This is one of sub-device driver for Advantech embedded controller
> AHC1EC0. This driver provides sysfs ABI for Advantech related
> applications to monitor the system status.
>
> Changed since V5:
> - remove unnecessary header files
> - Using [devm_]hwmon_device_register_with_info() to register
> hwmon driver based on reviewer's suggestion
>
> Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
checkpatch --strict says:
total: 0 errors, 1 warnings, 10 checks, 683 lines checked
The MAINTAINERS warning is irrelevant, but there are a number of alignment
and other style issues. Please fix those.
> ---
> drivers/hwmon/Kconfig | 10 +
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/ahc1ec0-hwmon.c | 660 ++++++++++++++++++++++++++++++++++
Documentation is missing.
> 3 files changed, 671 insertions(+)
> create mode 100644 drivers/hwmon/ahc1ec0-hwmon.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 1ecf697d8d99..bfa007026679 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -2139,6 +2139,16 @@ config SENSORS_INTEL_M10_BMC_HWMON
> sensors monitor various telemetry data of different components on the
> card, e.g. board temperature, FPGA core temperature/voltage/current.
>
> +config SENSORS_AHC1EC0_HWMON
> + tristate "Advantech AHC1EC0 Hardware Monitor Function"
> + depends on MFD_AHC1EC0
> + help
> + This driver provide support for the hardware monitoring functionality
> + for Advantech AHC1EC0 embedded controller on the board.
> +
> + This driver provides the sysfs attributes for applications to monitor
> + the system status, including system temperatures, voltages, current.
> +
> if ACPI
>
> comment "ACPI drivers"
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index 09a86c5e1d29..0c37747e8c4f 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -45,6 +45,7 @@ obj-$(CONFIG_SENSORS_ADT7411) += adt7411.o
> obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o
> obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
> obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
> +obj-$(CONFIG_SENSORS_AHC1EC0_HWMON) += ahc1ec0-hwmon.o
> obj-$(CONFIG_SENSORS_AMD_ENERGY) += amd_energy.o
> obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
> obj-$(CONFIG_SENSORS_ARM_SCMI) += scmi-hwmon.o
> diff --git a/drivers/hwmon/ahc1ec0-hwmon.c b/drivers/hwmon/ahc1ec0-hwmon.c
> new file mode 100644
> index 000000000000..688f07e6a6e0
> --- /dev/null
> +++ b/drivers/hwmon/ahc1ec0-hwmon.c
> @@ -0,0 +1,660 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * HWMON Driver for Advantech Embedded Controller chip AHC1EC0
> + *
> + * Copyright 2020, Advantech IIoT Group
> + *
> + */
> +
> +#include <linux/device.h>
> +#include <linux/errno.h>
> +#include <linux/hwmon-sysfs.h>
> +#include <linux/hwmon.h>
> +#include <linux/mfd/ahc1ec0.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/string.h>
> +#include <linux/types.h>
> +
> +struct ec_hwmon_attrs {
> + const char *name;
> + umode_t mode;
> + int (*read)(struct device *dev, long *val);
> +};
> +
> +struct adv_hwmon_profile {
> + int offset;
> + unsigned long resolution, resolution_vin, resolution_sys, resolution_curr, resolution_power;
> + unsigned long r1, r1_vin, r1_sys, r1_curr, r1_power;
> + unsigned long r2, r2_vin, r2_sys, r2_curr, r2_power;
> + int hwmon_in_list_cnt;
> + int temp_list_cnt;
> + int *hwmon_in_list;
> + int *temp_list;
> +};
> +
> +struct ec_hwmon_data {
> + struct device *dev;
> + struct device *hwmon_dev;
> + struct adv_ec_platform_data *adv_ec_data;
> + unsigned long temperature[3];
> + unsigned long ec_current[5];
> + unsigned long power[5];
> + unsigned long voltage[7];
> +
> + struct ec_hw_pin_table pin_tbl;
> + struct ec_smbuso_em0 ec_smboem0;
> + struct adv_hwmon_profile *profile;
> +};
> +
> +static int get_ec_in_vbat_input(struct device *dev, long *val);
> +static int get_ec_in_v5_input(struct device *dev, long *val);
> +static int get_ec_in_v12_input(struct device *dev, long *val);
> +static int get_ec_in_vcore_input(struct device *dev, long *val);
> +static int get_ec_current1_input(struct device *dev, long *val);
> +static int get_ec_cpu_temp(struct device *dev, long *val);
> +static int get_ec_sys_temp(struct device *dev, long *val);
> +
Please reorder code to not require those declarations.
> +const struct ec_hwmon_attrs ec_hwmon_in_attr_template[] = {
> + {"VBAT", 0444, get_ec_in_vbat_input}, // in1
> + {"5VSB", 0444, get_ec_in_v5_input}, // in2
> + {"Vin", 0444, get_ec_in_v12_input}, // in3 (== in8)
> + {"VCORE", 0444, get_ec_in_vcore_input}, // in4
> + {"Vin1", 0444, NULL}, // in5
> + {"Vin2", 0444, NULL}, // in6
> + {"System Voltage", 0444, NULL}, // in7
> + {"Current", 0444, get_ec_current1_input},
> +};
> +
> +const struct ec_hwmon_attrs ec_temp_attrs_template[] = {
> + {"CPU Temp", 0444, get_ec_cpu_temp},
> + {"System Temp", 0444, get_ec_sys_temp},
> +};
> +
> +enum ec_hwmon_in_type {
> + EC_HWMON_IN_VBAT,
> + EC_HWMON_IN_5VSB,
> + EC_HWMON_IN_12V,
> + EC_HWMON_IN_VCORE,
> + EC_HWMON_IN_VIN1,
> + EC_HWMON_IN_VIN2,
> + EC_HWMON_IN_SYS_VOL,
> + EC_HWMON_IN_CURRENT,
> +};
> +
> +enum ec_temp_type {
> + EC_TEMP_CPU,
> + EC_TEMP_SYS,
> +};
> +
> +static int hwmon_in_list_0[] = {
> + EC_HWMON_IN_VBAT,
> + EC_HWMON_IN_5VSB,
> + EC_HWMON_IN_12V,
> + EC_HWMON_IN_VCORE,
> + EC_HWMON_IN_CURRENT,
> +};
> +
> +static int hwmon_in_list_1[] = {
> + EC_HWMON_IN_VBAT,
> + EC_HWMON_IN_5VSB,
> + EC_HWMON_IN_12V,
> + EC_HWMON_IN_VCORE,
> +};
> +
> +static int temp_list_0[] = {
> + EC_TEMP_CPU,
> +};
> +
> +static int temp_list_1[] = {
> + EC_TEMP_CPU,
> + EC_TEMP_SYS,
> +};
> +
> +static struct adv_hwmon_profile advec_profile[] = {
> + /*
> + * TPC-8100TR, TPC-651T-E3AE, TPC-1251T-E3AE, TPC-1551T-E3AE,
> + * TPC-1751T-E3AE, TPC-1051WP-E3AE, TPC-1551WP-E3AE, TPC-1581WP-433AE,
> + * TPC-1782H-433AE, UNO-1483G-434AE, UNO-2483G-434AE, UNO-3483G-374AE,
> + * UNO-2473G, UNO-2484G-6???AE, UNO-2484G-7???AE, UNO-3283G-674AE,
> + * UNO-3285G-674AE
What is all this ? Please add a brief explanation (affected hardware ? chips ?)
> + * [0] AHC1EC0_HWMON_PRO_TEMPLATE
> + */
> + {
> + .resolution = 2929,
> + .r1 = 1912,
> + .r2 = 1000,
> + .offset = 0,
> + .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_0),
> + .temp_list_cnt = ARRAY_SIZE(temp_list_0),
> + .hwmon_in_list = hwmon_in_list_0,
> + .temp_list = temp_list_0,
> + },
> + /*
> + * TPC-B500-6??AE, TPC-5???T-6??AE, TPC-5???W-6??AE, TPC-B200-???AE,
> + * TPC-2???T-???AE, TPC-2???W-???AE
> + * [1] AHC1EC0_HWMON_PRO_TPC5XXX
> + */
> + {
> + .resolution = 2929,
> + .r1 = 1912,
> + .r2 = 1000,
> + .offset = 0,
> + .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
> + .temp_list_cnt = ARRAY_SIZE(temp_list_0),
> + .hwmon_in_list = hwmon_in_list_1,
> + .temp_list = temp_list_0,
> + },
> + /* PR/VR4
> + * [2] AHC1EC0_HWMON_PRO_PRVR4
> + */
> + {
> + .resolution = 2929,
> + .r1 = 1912,
> + .r2 = 1000,
> + .offset = 0,
> + .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
> + .temp_list_cnt = ARRAY_SIZE(temp_list_1),
> + .hwmon_in_list = hwmon_in_list_1,
> + .temp_list = temp_list_1,
> + },
> + /* UNO-2271G-E22AE/E23AE/E022AE/E023AE,UNO-420
> + * [3] AHC1EC0_HWMON_PRO_UNO2271G
> + */
> + {
> + .resolution = 2929,
> + .r1 = 1912,
> + .r2 = 1000,
> + .offset = 0,
> + .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
> + .temp_list_cnt = ARRAY_SIZE(temp_list_0),
> + .hwmon_in_list = hwmon_in_list_1,
> + .temp_list = temp_list_0,
> + },
> +};
> +
> +static void adv_ec_init_hwmon_profile(u32 profile, struct ec_hwmon_data *lmsensor_data)
> +{
> + int i;
> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> + struct ec_dynamic_table *dym_tbl = adv_ec_data->dym_tbl;
> +
> + if (profile >= ARRAY_SIZE(advec_profile))
> + return;
This can not happen. Please no unnecessary error checks.
> +
> + lmsensor_data->profile = &advec_profile[profile];
> +
> + for (i = 0; i < EC_MAX_TBL_NUM ; i++) {
> + switch (dym_tbl[i].device_id) {
> + case EC_DID_CMOSBAT:
> + ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vbat[1] = 1;
> + break;
> + case EC_DID_CMOSBAT_X2:
> + ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vbat[1] = 2;
> + break;
> + case EC_DID_CMOSBAT_X10:
> + ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vbat[1] = 10;
> + break;
> + case EC_DID_5VS0:
> + case EC_DID_5VS5:
> + ptbl->v5[0] = dym_tbl[i].hw_pin_num;
> + ptbl->v5[1] = 1;
> + break;
> + case EC_DID_5VS0_X2:
> + case EC_DID_5VS5_X2:
> + ptbl->v5[0] = dym_tbl[i].hw_pin_num;
> + ptbl->v5[1] = 2;
> + break;
> + case EC_DID_5VS0_X10:
> + case EC_DID_5VS5_X10:
> + ptbl->v5[0] = dym_tbl[i].hw_pin_num;
> + ptbl->v5[1] = 10;
> + break;
> + case EC_DID_12VS0:
> + ptbl->v12[0] = dym_tbl[i].hw_pin_num;
> + ptbl->v12[1] = 1;
> + break;
> + case EC_DID_12VS0_X2:
> + ptbl->v12[0] = dym_tbl[i].hw_pin_num;
> + ptbl->v12[1] = 2;
> + break;
> + case EC_DID_12VS0_X10:
> + ptbl->v12[0] = dym_tbl[i].hw_pin_num;
> + ptbl->v12[1] = 10;
> + break;
> + case EC_DID_VCOREA:
> + case EC_DID_VCOREB:
> + ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vcore[1] = 1;
> + break;
> + case EC_DID_VCOREA_X2:
> + case EC_DID_VCOREB_X2:
> + ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vcore[1] = 2;
> + break;
> + case EC_DID_VCOREA_X10:
> + case EC_DID_VCOREB_X10:
> + ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vcore[1] = 10;
> + break;
> + case EC_DID_DC:
> + ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vdc[1] = 1;
> + break;
> + case EC_DID_DC_X2:
> + ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vdc[1] = 2;
> + break;
> + case EC_DID_DC_X10:
> + ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
> + ptbl->vdc[1] = 10;
> + break;
> + case EC_DID_CURRENT:
> + ptbl->ec_current[0] = dym_tbl[i].hw_pin_num;
> + ptbl->ec_current[1] = 1;
> + break;
> + case EC_DID_SMBOEM0:
> + lmsensor_data->ec_smboem0.hw_pin_num = dym_tbl[i].hw_pin_num;
> + break;
> + default:
> + break;
> + }
> + }
> +}
> +
> +static int get_ec_in_vbat_input(struct device *dev, long *val)
> +{
> + unsigned int temp = 0;
> + unsigned long voltage = 0;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + temp = read_ad_value(adv_ec_data, ptbl->vbat[0], ptbl->vbat[1]);
> +
> + if (profile->r2 != 0)
> + voltage = temp * (profile->r1 + profile->r2) / profile->r2;
> +
> + if (profile->resolution != 0)
> + voltage = temp * profile->resolution / 1000 / 1000;
> +
> + if (profile->offset != 0)
> + voltage += (int)profile->offset * 100;
> +
> + lmsensor_data->voltage[0] = 10 * voltage;
> +
> + *val = lmsensor_data->voltage[0];
> + return 0;
> +}
> +
> +static int get_ec_in_v5_input(struct device *dev, long *val)
> +{
> + unsigned int temp;
> + unsigned long voltage = 0;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
Please no empty lines in variable declarations.
> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + temp = read_ad_value(adv_ec_data, ptbl->v5[0], ptbl->v5[1]);
> +
> + if (profile->r2 != 0)
> + voltage = temp * (profile->r1 + profile->r2) / profile->r2;
> +
> + if (profile->resolution != 0)
> + voltage = temp * profile->resolution / 1000 / 1000;
> +
> + if (profile->offset != 0)
> + voltage += (int)profile->offset * 100;
> +
> + lmsensor_data->voltage[1] = 10 * voltage;
> +
> + *val = lmsensor_data->voltage[1];
> + return 0;
> +}
> +
> +static int get_ec_in_v12_input(struct device *dev, long *val)
> +{
> + int temp;
> + unsigned long voltage = 0;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + temp = read_ad_value(adv_ec_data, ptbl->v12[0], ptbl->v12[1]);
> + if (temp == -1)
> + temp = read_ad_value(adv_ec_data, ptbl->vdc[0], ptbl->vdc[1]);
> +
> + if (profile->r2 != 0)
> + voltage = temp * (profile->r1 + profile->r2) / profile->r2;
> +
> + if (profile->resolution != 0)
> + voltage = temp * profile->resolution / 1000 / 1000;
> +
> + if (profile->offset != 0)
> + voltage += profile->offset * 100;
> +
> + lmsensor_data->voltage[2] = 10 * voltage;
> +
> + *val = lmsensor_data->voltage[2];
> + return 0;
> +}
> +
> +static int get_ec_in_vcore_input(struct device *dev, long *val)
> +{
> + int temp;
> + unsigned int voltage = 0;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + temp = read_ad_value(adv_ec_data, ptbl->vcore[0], ptbl->vcore[1]);
> +
> + if (profile->r2 != 0)
> + voltage = temp * (profile->r1 + profile->r2) / profile->r2;
> +
> + if (profile->resolution != 0)
> + voltage = temp * profile->resolution / 1000 / 1000;
> +
> + if (profile->offset != 0)
> + voltage += profile->offset * 100;
> +
> + lmsensor_data->voltage[3] = 10 * voltage;
> +
> + *val = lmsensor_data->voltage[3];
> + return 0;
> +}
> +
> +static int get_ec_current1_input(struct device *dev, long *val)
> +{
> + int temp;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + temp = read_ad_value(adv_ec_data, ptbl->ec_current[0], ptbl->ec_current[1]);
> +
> + if (profile->r2 != 0)
> + temp = temp * (profile->r1 + profile->r2) / profile->r2;
> +
> + if (profile->resolution != 0)
> + temp = temp * profile->resolution / 1000 / 1000;
> +
> + if (profile->offset != 0)
> + temp += profile->offset * 100;
> +
> + lmsensor_data->ec_current[3] = 10 * temp;
> +
> + *val = lmsensor_data->ec_current[3];
> + return 0;
> +}
> +
> +static int get_ec_cpu_temp(struct device *dev, long *val)
> +{
> + #define EC_ACPI_THERMAL1_REMOTE_TEMP 0x61
Pease move defines to top of file. Also, please use
#define<space>IDENTIFER<tab>value
> +
> + unsigned char value;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + read_acpi_value(adv_ec_data, EC_ACPI_THERMAL1_REMOTE_TEMP, &value);
This is not an appropriate function name for a device specific exported
function. The function name should have a prefix.
Also, the error code from read_acpi_value needs to be checked
and handled.
> + *val = 1000 * value;
> + return 0;
> +}
> +
> +static int get_ec_sys_temp(struct device *dev, long *val)
> +{
> + #define EC_ACPI_THERMAL1_LOCAL_TEMP 0x60
> +
> + unsigned char value;
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> + struct adv_ec_platform_data *adv_ec_data = lmsensor_data->adv_ec_data;
> +
> + read_acpi_value(adv_ec_data, EC_ACPI_THERMAL1_LOCAL_TEMP, &value);
> + *val = 1000 * value;
> + return 0;
> +}
> +
> +
> +static int
> +ahc1ec0_read_in(struct device *dev, u32 attr, int channel, long *val)
> +{
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + if (!(lmsensor_data && lmsensor_data->profile))
> + return -EINVAL;
This can not happen. Also, please don't use double negations.
> +
> + if (attr == hwmon_in_input &&
> + lmsensor_data->profile->hwmon_in_list_cnt > channel) {
This is unnecessary. Again, please drop all those unnecessary checks.
> + int index = lmsensor_data->profile->hwmon_in_list[channel];
> + const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_hwmon_in_attr_template[index];
> +
> + return ec_hwmon_attr->read(dev, val);
> + }
> +
> + return -EOPNOTSUPP;
> +}
> +
> +static int
> +ahc1ec0_read_temp(struct device *dev, u32 attr, int channel, long *val)
> +{
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + if (!(lmsensor_data && lmsensor_data->profile))
> + return -EINVAL;
> +
> + switch (attr) {
> + case hwmon_temp_input:
> + if (lmsensor_data->profile->temp_list_cnt > channel) {
> + int index = lmsensor_data->profile->temp_list[channel];
> + const struct ec_hwmon_attrs *devec_hwmon_attr =
> + &ec_temp_attrs_template[index];
> +
> + return devec_hwmon_attr->read(dev, val);
> + }
> + return -EOPNOTSUPP;
> + case hwmon_temp_crit:
> + // both CPU temp and System temp are all this value
> + *val = 100000;
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int
> +ahc1ec0_read_string(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr,
> + int channel,
> + const char **str)
> +{
> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
> +
> + if (!(lmsensor_data && lmsensor_data->profile))
> + return -EINVAL;
> +
> + if ((type == hwmon_in && attr == hwmon_in_label) &&
> + (lmsensor_data->profile->hwmon_in_list_cnt > channel)) {
lmsensor_data->profile->hwmon_in_list_cnt > channel is unnecessary, and
the () around it as well.
> + int index = lmsensor_data->profile->hwmon_in_list[channel];
> + const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_hwmon_in_attr_template[index];
> +
> + *str = ec_hwmon_attr->name;
> + return 0;
> + }
> +
> + if ((type == hwmon_temp && attr == hwmon_temp_label) &&
> + (lmsensor_data->profile->temp_list_cnt > channel)) {
> + int index = lmsensor_data->profile->temp_list[channel];
> + const struct ec_hwmon_attrs *ec_hwmon_attr = &ec_temp_attrs_template[index];
> +
> + *str = ec_hwmon_attr->name;
> + return 0;
> + }
> +
> + return -EOPNOTSUPP;
> +}
> +
> +static int
> +ahc1ec0_read(struct device *dev,
> + enum hwmon_sensor_types type,
> + u32 attr,
> + int channel,
> + long *val)
Too many line splits. Please reduce to minuimum required.
> +{
> + switch (type) {
> + case hwmon_in:
> + return ahc1ec0_read_in(dev, attr, channel, val);
> + case hwmon_temp:
> + return ahc1ec0_read_temp(dev, attr, channel, val);
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static umode_t
> +ec_hwmon_in_visible(const void *data, u32 attr, int channel)
> +{
> + switch (attr) {
> + case hwmon_in_input:
> + case hwmon_in_label:
> + return 0444;
> + default:
> + return 0;
> + }
The code needs to take channel into account, and return 0 if a voltage sensor
is not supported.
> +}
> +
> +static umode_t
> +ec_temp_in_visible(const void *data, u32 attr, int channel)
> +{
> + switch (attr) {
> + case hwmon_temp_input:
> + case hwmon_temp_crit:
> + case hwmon_temp_label:
> + return 0444;
> + default:
> + return 0;
> + }
The code needs to take channel into account, and return 0 if the second
temperature sensor is not supported.
> +}
> +
> +static umode_t
> +ahc1ec0_is_visible(const void *data,
> + enum hwmon_sensor_types type, u32 attr, int channel)
Now this is a really odd (nd unnecessary) continuation line.
> +{
> + switch (type) {
> + case hwmon_in:
> + return ec_hwmon_in_visible(data, attr, channel);
> + case hwmon_temp:
> + return ec_temp_in_visible(data, attr, channel);
> + default:
> + return 0;
> + }
> +}
> +
> +static const u32 ahc1ec0_in_config[] = {
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + HWMON_I_INPUT | HWMON_I_LABEL,
> + 0
> +};
> +
> +static const struct hwmon_channel_info ahc1ec0_in = {
> + .type = hwmon_in,
> + .config = ahc1ec0_in_config,
> +};
> +
> +static const u32 ahc1ec0_temp_config[] = {
> + HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
I don't think this works as intended. it only lists one temperature
sensor, but the code clearly suggests that there can be two.
> + 0
> +};
> +
> +static const struct hwmon_channel_info ahc1ec0_temp = {
> + .type = hwmon_temp,
> + .config = ahc1ec0_temp_config,
> +};
> +
> +static const struct hwmon_channel_info *ahc1ec0_info[] = {
> + &ahc1ec0_in,
> + &ahc1ec0_temp,
> + NULL
> +};
> +
> +static const struct hwmon_ops ahc1ec0_hwmon_ops = {
> + .is_visible = ahc1ec0_is_visible,
> + .read = ahc1ec0_read,
> + .read_string = ahc1ec0_read_string,
> +};
> +
> +static const struct hwmon_chip_info ahc1ec0_chip_info = {
> + .ops = &ahc1ec0_hwmon_ops,
> + .info = ahc1ec0_info,
> +};
> +
> +static int adv_ec_hwmon_probe(struct platform_device *pdev)
> +{
> + int ret;
> + u32 profile;
> + struct device *dev = &pdev->dev;
> + struct adv_ec_platform_data *adv_ec_data;
> + struct ec_hwmon_data *lmsensor_data;
> +
> + adv_ec_data = dev_get_drvdata(dev->parent);
> + if (!adv_ec_data)
> + return -EINVAL;
> +
> + ret = device_property_read_u32(dev->parent, "advantech,hwmon-profile", &profile);
> + if (ret < 0) {
> + dev_err(dev, "get hwmon-profile failed! (%d)", ret);
> + return ret;
> + }
> +
> + if (!(profile < ARRAY_SIZE(advec_profile))) {
Please no double negations.
if (profile >= ARRAY_SIZE(advec_profile))
is much easier to understand.
> + dev_err(dev, "not support hwmon profile(%d)!\n", profile);
> + return -EINVAL;
> + }
> +
> + lmsensor_data = devm_kzalloc(dev, sizeof(struct ec_hwmon_data), GFP_KERNEL);
> + if (!lmsensor_data)
> + return -ENOMEM;
> +
> + lmsensor_data->adv_ec_data = adv_ec_data;
> + lmsensor_data->dev = dev;
> + dev_set_drvdata(dev, lmsensor_data);
> +
> + adv_ec_init_hwmon_profile(profile, lmsensor_data);
> +
> + lmsensor_data->hwmon_dev = devm_hwmon_device_register_with_info(dev,
> + "ahc1ec0.hwmon", lmsensor_data, &ahc1ec0_chip_info, NULL);
> +
> + return PTR_ERR_OR_ZERO(lmsensor_data->hwmon_dev);
> +}
> +
> +static struct platform_driver adv_hwmon_drv = {
> + .driver = {
> + .name = "ahc1ec0-hwmon",
> + },
> + .probe = adv_ec_hwmon_probe,
> +};
> +module_platform_driver(adv_hwmon_drv);
> +
> +MODULE_LICENSE("Dual BSD/GPL");
> +MODULE_ALIAS("platform:ahc1ec0-hwmon");
> +MODULE_DESCRIPTION("Advantech Embedded Controller HWMON Driver.");
> +MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
> +MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@advantech.com.cn>");
> +MODULE_VERSION("1.0");
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v6 6/6] watchdog: ahc1ec0-wdt: Add sub-device watchdog for Advantech embedded controller
2021-01-18 12:37 ` [PATCH v6 6/6] watchdog: ahc1ec0-wdt: Add sub-device watchdog " Campion Kang
2021-01-19 7:26 ` AceLan Kao
@ 2021-01-23 17:00 ` Guenter Roeck
1 sibling, 0 replies; 20+ messages in thread
From: Guenter Roeck @ 2021-01-23 17:00 UTC (permalink / raw)
To: Campion Kang
Cc: Lee Jones, Rob Herring, linux-kernel, devicetree, Jean Delvare,
Wim Van Sebroeck, linux-hwmon, linux-watchdog, AceLan Kao
On Mon, Jan 18, 2021 at 08:37:49PM +0800, Campion Kang wrote:
> This is one of sub-device driver for Advantech embedded controller
> AHC1EC0. This driver provide watchdog functionality for Advantech
> related applications to restart the system.
>
> Changed since V5:
> - remove unnecessary header files
> - bug fixed: reboot halt if watchdog enabled
> - Kconfig: add "AHC1EC0" string to clearly define the EC name
>
> Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
> ---
> drivers/watchdog/Kconfig | 11 ++
> drivers/watchdog/Makefile | 1 +
> drivers/watchdog/ahc1ec0-wdt.c | 261 +++++++++++++++++++++++++++++++++
> 3 files changed, 273 insertions(+)
> create mode 100644 drivers/watchdog/ahc1ec0-wdt.c
>
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 7ff941e71b79..1a27836883ac 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -1636,6 +1636,17 @@ config NIC7018_WDT
> To compile this driver as a module, choose M here: the module will be
> called nic7018_wdt.
>
> +config AHC1EC0_WDT
> + tristate "Advantech AHC1EC0 Watchdog Function"
> + depends on MFD_AHC1EC0
> + help
> + This is sub-device for Advantech AHC1EC0 embedded controller.
> +
> + This driver provide watchdog functionality for Advantech related
> + applications to restart the system.
> + To compile thie driver as a module, choose M here: the module will be
> + called ahc1ec0-wdt.
> +
> # M68K Architecture
>
> config M54xx_WATCHDOG
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index 5c74ee19d441..7190811b1e50 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -145,6 +145,7 @@ obj-$(CONFIG_INTEL_MID_WATCHDOG) += intel-mid_wdt.o
> obj-$(CONFIG_INTEL_MEI_WDT) += mei_wdt.o
> obj-$(CONFIG_NI903X_WDT) += ni903x_wdt.o
> obj-$(CONFIG_NIC7018_WDT) += nic7018_wdt.o
> +obj-$(CONFIG_AHC1EC0_WDT) += ahc1ec0-wdt.o
> obj-$(CONFIG_MLX_WDT) += mlx_wdt.o
>
> # M68K Architecture
> diff --git a/drivers/watchdog/ahc1ec0-wdt.c b/drivers/watchdog/ahc1ec0-wdt.c
> new file mode 100644
> index 000000000000..4497b6106b24
> --- /dev/null
> +++ b/drivers/watchdog/ahc1ec0-wdt.c
> @@ -0,0 +1,261 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Watchdog Driver for Advantech Embedded Controller chip AHC1EC0
> + *
> + * Copyright 2020, Advantech IIoT Group
> + *
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/ahc1ec0.h>
> +#include <linux/module.h>
> +#include <linux/notifier.h>
> +#include <linux/platform_device.h>
> +#include <linux/reboot.h>
> +#include <linux/types.h>
> +#include <linux/watchdog.h>
> +
> +#define DRV_NAME "ahc1ec0-wdt"
> +
> +struct ec_wdt_data {
> + struct watchdog_device wdtdev;
> + struct adv_ec_platform_data *adv_ec_data;
> + struct notifier_block reboot_nb;
> + struct mutex lock_ioctl;
> + int is_enable;
> + int current_timeout;
is_enable and current_timeout are only written to and never read, and thus pointless.
> +};
> +
> +#define EC_WDT_MIN_TIMEOUT 1 /* The watchdog devices minimum timeout value (in seconds). */
> +#define EC_WDT_MAX_TIMEOUT 600 /* The watchdog devices maximum timeout value (in seconds) */
> +#define EC_WDT_DEFAULT_TIMEOUT 45
> +
> +static int set_delay(struct adv_ec_platform_data *adv_ec_data, unsigned short delay_timeout_in_ms)
> +{
> + if (write_hw_ram(adv_ec_data, EC_RESET_DELAY_TIME_L, delay_timeout_in_ms & 0x00FF)) {
write_hw_ram() is too generic for a device specific function. Please add a
prefix.
> + pr_err("Failed to set Watchdog Retset Time Low byte.");
Reset ?
Either case, please drop those error messages. If they happen they would likely
be persistent and end up clogging the kernel log.
> + return -EINVAL;
> + }
> +
> + if (write_hw_ram(adv_ec_data, EC_RESET_DELAY_TIME_H, (delay_timeout_in_ms & 0xFF00) >> 8)) {
> + pr_err("Failed to set Watchdog Retset Time Hight byte.");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int advwdt_set_heartbeat(unsigned long t)
> +{
> + if (t < 1 || t > 6553) {
> + pr_err("%s: the input timeout is out of range.", __func__);
> + pr_err("Please choose valid data between 1 ~ 6553.");
> + return -EINVAL;
> + }
Unecessary check. The watchdog core performs limit checks.
Repeating them does not add value.
> +
> + return (t * 10);
Given that, this helper function is quite pointless (and misleading, since
it doesn't set anything).
> +}
> +
> +/* Notifier for system down */
> +static int advwdt_notify_sys(struct notifier_block *nb, unsigned long code, void *data)
> +{
> + if (code == SYS_DOWN || code == SYS_HALT) {
> + struct ec_wdt_data *ec_wdt_data;
> +
> + ec_wdt_data = container_of(nb, struct ec_wdt_data, reboot_nb);
> + if (!ec_wdt_data)
> + return NOTIFY_BAD;
> +
> + /* Turn the WDT off */
> + if (write_hwram_command(ec_wdt_data->adv_ec_data, EC_WDT_STOP)) {
> + pr_err("Failed to set Watchdog stop.");
> + return -EINVAL;
> + }
> + ec_wdt_data->is_enable = 0;
> + pr_info("%s: notify sys shutdown", __func__);
> + }
> +
> + return NOTIFY_DONE;
> +}
Please use the watchdog subsystem instead of declaring yor own notifier.
> +
> +static int ec_wdt_start(struct watchdog_device *wdd)
> +{
> + int ret;
> + int timeout, timeout_in_ms;
> + struct ec_wdt_data *ec_wdt_data = watchdog_get_drvdata(wdd);
> + struct adv_ec_platform_data *adv_ec_data;
> +
> + dev_dbg(wdd->parent, "%s\n", __func__);
> +
> + adv_ec_data = ec_wdt_data->adv_ec_data;
> + timeout = wdd->timeout; /* The watchdog devices timeout value (in seconds). */
'timeout' is used just once. Just use wdd->timeout directly below.
> +
> + mutex_lock(&ec_wdt_data->lock_ioctl);
The watchdog core ensures that there will be no more than one caller.
What is this lock supposed to protect ?
> +
> + timeout_in_ms = advwdt_set_heartbeat(timeout);
timeout_in_ms is the timeout in 10th of seconds. "_ms" is misleading.
> + if (timeout_in_ms < 0) {
> + mutex_unlock(&ec_wdt_data->lock_ioctl);
> + return timeout_in_ms;
> + }
> +
> + ret = set_delay(adv_ec_data, (unsigned short)(timeout_in_ms-1));
Unnecessary type cast.
> + if (ret) {
> + dev_err(wdd->parent, "Failed to set Watchdog delay (ret=%x).\n", ret);
This driver is extremely noisy when it comes to error messages.
> + mutex_unlock(&ec_wdt_data->lock_ioctl);
> + return ret;
> + }
> + ret = write_hwram_command(adv_ec_data, EC_WDT_STOP);
Errors from this call are ignored. If that is on purpose, the assignment
to 'ret' is unnecessary.
> + ret = write_hwram_command(adv_ec_data, EC_WDT_START);
> + if (ret) {
> + dev_err(wdd->parent, "Failed to set Watchdog start (ret=%x).\n", ret);
> + mutex_unlock(&ec_wdt_data->lock_ioctl);
> + return ret;
This should be handled with a goto to the end of the function.
See error handling in coding style.
> + }
> + ec_wdt_data->is_enable = 1;
> + ec_wdt_data->current_timeout = timeout_in_ms/10;
The conversion from timeout -> timeout_in_ms -> timeout
seems to be quite pointless.
> +
> + mutex_unlock(&ec_wdt_data->lock_ioctl);
> + return 0;
> +}
> +
> +static int ec_wdt_stop(struct watchdog_device *wdd)
> +{
> + int ret;
> + struct ec_wdt_data *ec_wdt_data = watchdog_get_drvdata(wdd);
> + struct adv_ec_platform_data *adv_ec_data;
> +
> + dev_dbg(wdd->parent, "%s\n", __func__);
> +
> + adv_ec_data = ec_wdt_data->adv_ec_data;
> +
> + mutex_lock(&ec_wdt_data->lock_ioctl);
> + ret = write_hwram_command(adv_ec_data, EC_WDT_STOP);
> + mutex_unlock(&ec_wdt_data->lock_ioctl);
> + if (ret)
> + pr_err("Failed to set Watchdog stop.");
> + else
> + ec_wdt_data->is_enable = 0;
> +
> + return ret;
> +}
> +
> +static int ec_wdt_ping(struct watchdog_device *wdd)
> +{
> + int ret;
> + struct ec_wdt_data *ec_wdt_data = watchdog_get_drvdata(wdd);
> + struct adv_ec_platform_data *adv_ec_data;
> +
> + dev_dbg(wdd->parent, "%s\n", __func__);
> +
> + adv_ec_data = ec_wdt_data->adv_ec_data;
> +
> + mutex_lock(&ec_wdt_data->lock_ioctl);
> + ret = write_hwram_command(adv_ec_data, EC_WDT_RESET);
> + mutex_unlock(&ec_wdt_data->lock_ioctl);
> + if (ret) {
> + pr_err("Failed to set Watchdog reset.");
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int ec_wdt_set_timeout(struct watchdog_device *wdd,
> + unsigned int timeout)
> +{
> + dev_dbg(wdd->parent, "%s, timeout=%d\n", __func__, timeout);
> +
> + wdd->timeout = timeout;
> +
> + if (watchdog_active(wdd))
> + return ec_wdt_start(wdd);
> +
> + return 0;
> +}
> +
> +static const struct watchdog_info ec_watchdog_info = {
> + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
> + .identity = "AHC1EC0 Watchdog",
> +};
> +
> +static const struct watchdog_ops ec_watchdog_ops = {
> + .owner = THIS_MODULE,
> + .start = ec_wdt_start,
> + .stop = ec_wdt_stop,
> + .ping = ec_wdt_ping,
> + .set_timeout = ec_wdt_set_timeout,
> +};
> +
> +static int adv_ec_wdt_probe(struct platform_device *pdev)
> +{
> + int ret;
> + struct device *dev = &pdev->dev;
> + struct adv_ec_platform_data *adv_ec_data;
> + struct ec_wdt_data *ec_wdt_data;
> + struct watchdog_device *wdd;
> +
> + dev_info(dev, "watchdog probe start\n");
> +
> + adv_ec_data = dev_get_drvdata(dev->parent);
> + if (!adv_ec_data)
> + return -EINVAL;
> +
> + ec_wdt_data = devm_kzalloc(dev, sizeof(struct ec_wdt_data), GFP_KERNEL);
> + if (!ec_wdt_data)
> + return -ENOMEM;
> +
> + mutex_init(&ec_wdt_data->lock_ioctl);
> +
> + ec_wdt_data->adv_ec_data = adv_ec_data;
> + wdd = &ec_wdt_data->wdtdev;
> +
> + watchdog_init_timeout(&ec_wdt_data->wdtdev, 0, dev);
> +
> + //watchdog_set_nowayout(&ec_wdt_data->wdtdev, WATCHDOG_NOWAYOUT);
Please no C++ comments in the code.
> + watchdog_set_drvdata(&ec_wdt_data->wdtdev, ec_wdt_data);
> + platform_set_drvdata(pdev, ec_wdt_data);
> +
> + wdd->info = &ec_watchdog_info;
> + wdd->ops = &ec_watchdog_ops;
> + wdd->min_timeout = EC_WDT_MIN_TIMEOUT;
> + wdd->max_timeout = EC_WDT_MAX_TIMEOUT;
> + wdd->parent = dev;
> +
> + ec_wdt_data->wdtdev.timeout = EC_WDT_DEFAULT_TIMEOUT;
> + ec_wdt_data->is_enable = 0;
> + ec_wdt_data->current_timeout = EC_WDT_DEFAULT_TIMEOUT;
> +
> + watchdog_stop_on_unregister(wdd);
> +
> + ec_wdt_data->reboot_nb.notifier_call = advwdt_notify_sys;
> + ret = devm_register_reboot_notifier(dev, &ec_wdt_data->reboot_nb);
> + if (ret) {
> + dev_err(dev, "watchdog%d: Cannot register reboot notifier (%d)\n",
> + wdd->id, ret);
> + return ret;
> + }
Use watchdog_stop_on_reboot().
> +
> + ret = devm_watchdog_register_device(dev, wdd);
> + if (ret != 0)
> + dev_err(dev, "watchdog_register_device() failed: %d\n",
> + ret);
And right afterwards "watchdog register success", and the error
is ignored.
> +
> + dev_info(dev, "watchdog register success\n");
> +
> + return 0;
> +}
> +
> +static struct platform_driver adv_wdt_drv = {
> + .driver = {
> + .name = DRV_NAME,
> + },
> + .probe = adv_ec_wdt_probe,
> +};
> +module_platform_driver(adv_wdt_drv);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:" DRV_NAME);
> +MODULE_DESCRIPTION("Advantech Embedded Controller Watchdog Driver.");
> +MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
> +MODULE_VERSION("1.0");
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v6 5/6] hwmon: ahc1ec0-hwmon: Add sub-device hwmon for Advantech embedded controller
[not found] ` <66338d379bb14c2fbd8a6507075384ce@Taipei11.ADVANTECH.CORP>
@ 2021-01-28 15:13 ` Guenter Roeck
0 siblings, 0 replies; 20+ messages in thread
From: Guenter Roeck @ 2021-01-28 15:13 UTC (permalink / raw)
To: Campion.Kang
Cc: Lee Jones, Rob Herring, linux-kernel, devicetree, Jean Delvare,
Wim Van Sebroeck, linux-hwmon, linux-watchdog, AceLan Kao
On 1/28/21 2:28 AM, Campion.Kang wrote:
> Hello Guenter,
>
> Thanks your review and suggestion. I will fix them.
> One issue I am not clear, Documentation is missing, which document?
> Did you mean this file Documentation\devicetree\bindings\mfd\ahc1ec0.yaml? If yes, it submit in this patch "[PATCH v6 3/6] dt-bindings: mfd: ahc1ec0.yaml: Add Advantech embedded controller - AHC1EC0".
> Would you kindly give me more information?
>
Per Documentation/hwmon/submitting-patches.rst:
3. New drivers
--------------
...
* Document the driver in Documentation/hwmon/<driver_name>.rst.
Please read and follow that document. It will save us both a lot of time.
Thanks,
Guenter
> Best regards,
> Campion
>
>> -----Original Message-----
>> From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
>> Sent: Sunday, January 24, 2021 12:35 AM
>> To: Campion.Kang <Campion.Kang@advantech.com.tw>
>> Cc: Lee Jones <lee.jones@linaro.org>; Rob Herring <robh+dt@kernel.org>;
>> linux-kernel@vger.kernel.org; devicetree@vger.kernel.org; Jean Delvare
>> <jdelvare@suse.com>; Wim Van Sebroeck <wim@linux-watchdog.org>;
>> linux-hwmon@vger.kernel.org; linux-watchdog@vger.kernel.org; AceLan Kao
>> <chia-lin.kao@canonical.com>
>> Subject: Re: [PATCH v6 5/6] hwmon: ahc1ec0-hwmon: Add sub-device hwmon
>> for Advantech embedded controller
>>
>> On Mon, Jan 18, 2021 at 08:37:48PM +0800, Campion Kang wrote:
>>> This is one of sub-device driver for Advantech embedded controller
>>> AHC1EC0. This driver provides sysfs ABI for Advantech related
>>> applications to monitor the system status.
>>>
>>> Changed since V5:
>>> - remove unnecessary header files
>>> - Using [devm_]hwmon_device_register_with_info() to register hwmon
>>> driver based on reviewer's suggestion
>>>
>>> Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
>>> Tested-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
>>
>> checkpatch --strict says:
>>
>> total: 0 errors, 1 warnings, 10 checks, 683 lines checked
>>
>> The MAINTAINERS warning is irrelevant, but there are a number of
>> alignment and other style issues. Please fix those.
>>
>>> ---
>>> drivers/hwmon/Kconfig | 10 +
>>> drivers/hwmon/Makefile | 1 +
>>> drivers/hwmon/ahc1ec0-hwmon.c | 660
>>> ++++++++++++++++++++++++++++++++++
>>
>> Documentation is missing.
>>
>>> 3 files changed, 671 insertions(+)
>>> create mode 100644 drivers/hwmon/ahc1ec0-hwmon.c
>>>
>>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index
>>> 1ecf697d8d99..bfa007026679 100644
>>> --- a/drivers/hwmon/Kconfig
>>> +++ b/drivers/hwmon/Kconfig
>>> @@ -2139,6 +2139,16 @@ config SENSORS_INTEL_M10_BMC_HWMON
>>> sensors monitor various telemetry data of different components on
>> the
>>> card, e.g. board temperature, FPGA core
>> temperature/voltage/current.
>>>
>>> +config SENSORS_AHC1EC0_HWMON
>>> + tristate "Advantech AHC1EC0 Hardware Monitor Function"
>>> + depends on MFD_AHC1EC0
>>> + help
>>> + This driver provide support for the hardware monitoring
>> functionality
>>> + for Advantech AHC1EC0 embedded controller on the board.
>>> +
>>> + This driver provides the sysfs attributes for applications to monitor
>>> + the system status, including system temperatures, voltages, current.
>>> +
>>> if ACPI
>>>
>>> comment "ACPI drivers"
>>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index
>>> 09a86c5e1d29..0c37747e8c4f 100644
>>> --- a/drivers/hwmon/Makefile
>>> +++ b/drivers/hwmon/Makefile
>>> @@ -45,6 +45,7 @@ obj-$(CONFIG_SENSORS_ADT7411) += adt7411.o
>>> obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o
>>> obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
>>> obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
>>> +obj-$(CONFIG_SENSORS_AHC1EC0_HWMON) += ahc1ec0-hwmon.o
>>> obj-$(CONFIG_SENSORS_AMD_ENERGY) += amd_energy.o
>>> obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
>>> obj-$(CONFIG_SENSORS_ARM_SCMI) += scmi-hwmon.o
>>> diff --git a/drivers/hwmon/ahc1ec0-hwmon.c
>>> b/drivers/hwmon/ahc1ec0-hwmon.c new file mode 100644 index
>>> 000000000000..688f07e6a6e0
>>> --- /dev/null
>>> +++ b/drivers/hwmon/ahc1ec0-hwmon.c
>>> @@ -0,0 +1,660 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>> +/*
>>> + * HWMON Driver for Advantech Embedded Controller chip AHC1EC0
>>> + *
>>> + * Copyright 2020, Advantech IIoT Group
>>> + *
>>> + */
>>> +
>>> +#include <linux/device.h>
>>> +#include <linux/errno.h>
>>> +#include <linux/hwmon-sysfs.h>
>>> +#include <linux/hwmon.h>
>>> +#include <linux/mfd/ahc1ec0.h>
>>> +#include <linux/module.h>
>>> +#include <linux/platform_device.h>
>>> +#include <linux/property.h>
>>> +#include <linux/string.h>
>>> +#include <linux/types.h>
>>> +
>>> +struct ec_hwmon_attrs {
>>> + const char *name;
>>> + umode_t mode;
>>> + int (*read)(struct device *dev, long *val); };
>>> +
>>> +struct adv_hwmon_profile {
>>> + int offset;
>>> + unsigned long resolution, resolution_vin, resolution_sys,
>> resolution_curr, resolution_power;
>>> + unsigned long r1, r1_vin, r1_sys, r1_curr, r1_power;
>>> + unsigned long r2, r2_vin, r2_sys, r2_curr, r2_power;
>>> + int hwmon_in_list_cnt;
>>> + int temp_list_cnt;
>>> + int *hwmon_in_list;
>>> + int *temp_list;
>>> +};
>>> +
>>> +struct ec_hwmon_data {
>>> + struct device *dev;
>>> + struct device *hwmon_dev;
>>> + struct adv_ec_platform_data *adv_ec_data;
>>> + unsigned long temperature[3];
>>> + unsigned long ec_current[5];
>>> + unsigned long power[5];
>>> + unsigned long voltage[7];
>>> +
>>> + struct ec_hw_pin_table pin_tbl;
>>> + struct ec_smbuso_em0 ec_smboem0;
>>> + struct adv_hwmon_profile *profile;
>>> +};
>>> +
>>> +static int get_ec_in_vbat_input(struct device *dev, long *val);
>>> +static int get_ec_in_v5_input(struct device *dev, long *val); static
>>> +int get_ec_in_v12_input(struct device *dev, long *val); static int
>>> +get_ec_in_vcore_input(struct device *dev, long *val); static int
>>> +get_ec_current1_input(struct device *dev, long *val); static int
>>> +get_ec_cpu_temp(struct device *dev, long *val); static int
>>> +get_ec_sys_temp(struct device *dev, long *val);
>>> +
>>
>> Please reorder code to not require those declarations.
>>
>>> +const struct ec_hwmon_attrs ec_hwmon_in_attr_template[] = {
>>> + {"VBAT", 0444, get_ec_in_vbat_input}, // in1
>>> + {"5VSB", 0444, get_ec_in_v5_input}, // in2
>>> + {"Vin", 0444, get_ec_in_v12_input}, // in3 (== in8)
>>> + {"VCORE", 0444, get_ec_in_vcore_input}, // in4
>>> + {"Vin1", 0444, NULL}, // in5
>>> + {"Vin2", 0444, NULL}, // in6
>>> + {"System Voltage", 0444, NULL}, // in7
>>> + {"Current", 0444, get_ec_current1_input},
>>> +};
>>> +
>>> +const struct ec_hwmon_attrs ec_temp_attrs_template[] = {
>>> + {"CPU Temp", 0444, get_ec_cpu_temp},
>>> + {"System Temp", 0444, get_ec_sys_temp},
>>> +};
>>> +
>>> +enum ec_hwmon_in_type {
>>> + EC_HWMON_IN_VBAT,
>>> + EC_HWMON_IN_5VSB,
>>> + EC_HWMON_IN_12V,
>>> + EC_HWMON_IN_VCORE,
>>> + EC_HWMON_IN_VIN1,
>>> + EC_HWMON_IN_VIN2,
>>> + EC_HWMON_IN_SYS_VOL,
>>> + EC_HWMON_IN_CURRENT,
>>> +};
>>> +
>>> +enum ec_temp_type {
>>> + EC_TEMP_CPU,
>>> + EC_TEMP_SYS,
>>> +};
>>> +
>>> +static int hwmon_in_list_0[] = {
>>> + EC_HWMON_IN_VBAT,
>>> + EC_HWMON_IN_5VSB,
>>> + EC_HWMON_IN_12V,
>>> + EC_HWMON_IN_VCORE,
>>> + EC_HWMON_IN_CURRENT,
>>> +};
>>> +
>>> +static int hwmon_in_list_1[] = {
>>> + EC_HWMON_IN_VBAT,
>>> + EC_HWMON_IN_5VSB,
>>> + EC_HWMON_IN_12V,
>>> + EC_HWMON_IN_VCORE,
>>> +};
>>> +
>>> +static int temp_list_0[] = {
>>> + EC_TEMP_CPU,
>>> +};
>>> +
>>> +static int temp_list_1[] = {
>>> + EC_TEMP_CPU,
>>> + EC_TEMP_SYS,
>>> +};
>>> +
>>> +static struct adv_hwmon_profile advec_profile[] = {
>>> + /*
>>> + * TPC-8100TR, TPC-651T-E3AE, TPC-1251T-E3AE, TPC-1551T-E3AE,
>>> + * TPC-1751T-E3AE, TPC-1051WP-E3AE, TPC-1551WP-E3AE,
>> TPC-1581WP-433AE,
>>> + * TPC-1782H-433AE, UNO-1483G-434AE, UNO-2483G-434AE,
>> UNO-3483G-374AE,
>>> + * UNO-2473G, UNO-2484G-6???AE, UNO-2484G-7???AE,
>> UNO-3283G-674AE,
>>> + * UNO-3285G-674AE
>>
>> What is all this ? Please add a brief explanation (affected hardware ? chips ?)
>>
>>> + * [0] AHC1EC0_HWMON_PRO_TEMPLATE
>>> + */
>>> + {
>>> + .resolution = 2929,
>>> + .r1 = 1912,
>>> + .r2 = 1000,
>>> + .offset = 0,
>>> + .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_0),
>>> + .temp_list_cnt = ARRAY_SIZE(temp_list_0),
>>> + .hwmon_in_list = hwmon_in_list_0,
>>> + .temp_list = temp_list_0,
>>> + },
>>> + /*
>>> + * TPC-B500-6??AE, TPC-5???T-6??AE, TPC-5???W-6??AE,
>> TPC-B200-???AE,
>>> + * TPC-2???T-???AE, TPC-2???W-???AE
>>> + * [1] AHC1EC0_HWMON_PRO_TPC5XXX
>>> + */
>>> + {
>>> + .resolution = 2929,
>>> + .r1 = 1912,
>>> + .r2 = 1000,
>>> + .offset = 0,
>>> + .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
>>> + .temp_list_cnt = ARRAY_SIZE(temp_list_0),
>>> + .hwmon_in_list = hwmon_in_list_1,
>>> + .temp_list = temp_list_0,
>>> + },
>>> + /* PR/VR4
>>> + * [2] AHC1EC0_HWMON_PRO_PRVR4
>>> + */
>>> + {
>>> + .resolution = 2929,
>>> + .r1 = 1912,
>>> + .r2 = 1000,
>>> + .offset = 0,
>>> + .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
>>> + .temp_list_cnt = ARRAY_SIZE(temp_list_1),
>>> + .hwmon_in_list = hwmon_in_list_1,
>>> + .temp_list = temp_list_1,
>>> + },
>>> + /* UNO-2271G-E22AE/E23AE/E022AE/E023AE,UNO-420
>>> + * [3] AHC1EC0_HWMON_PRO_UNO2271G
>>> + */
>>> + {
>>> + .resolution = 2929,
>>> + .r1 = 1912,
>>> + .r2 = 1000,
>>> + .offset = 0,
>>> + .hwmon_in_list_cnt = ARRAY_SIZE(hwmon_in_list_1),
>>> + .temp_list_cnt = ARRAY_SIZE(temp_list_0),
>>> + .hwmon_in_list = hwmon_in_list_1,
>>> + .temp_list = temp_list_0,
>>> + },
>>> +};
>>> +
>>> +static void adv_ec_init_hwmon_profile(u32 profile, struct
>>> +ec_hwmon_data *lmsensor_data) {
>>> + int i;
>>> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
>>> + struct adv_ec_platform_data *adv_ec_data =
>> lmsensor_data->adv_ec_data;
>>> + struct ec_dynamic_table *dym_tbl = adv_ec_data->dym_tbl;
>>> +
>>> + if (profile >= ARRAY_SIZE(advec_profile))
>>> + return;
>>
>> This can not happen. Please no unnecessary error checks.
>>
>>> +
>>> + lmsensor_data->profile = &advec_profile[profile];
>>> +
>>> + for (i = 0; i < EC_MAX_TBL_NUM ; i++) {
>>> + switch (dym_tbl[i].device_id) {
>>> + case EC_DID_CMOSBAT:
>>> + ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->vbat[1] = 1;
>>> + break;
>>> + case EC_DID_CMOSBAT_X2:
>>> + ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->vbat[1] = 2;
>>> + break;
>>> + case EC_DID_CMOSBAT_X10:
>>> + ptbl->vbat[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->vbat[1] = 10;
>>> + break;
>>> + case EC_DID_5VS0:
>>> + case EC_DID_5VS5:
>>> + ptbl->v5[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->v5[1] = 1;
>>> + break;
>>> + case EC_DID_5VS0_X2:
>>> + case EC_DID_5VS5_X2:
>>> + ptbl->v5[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->v5[1] = 2;
>>> + break;
>>> + case EC_DID_5VS0_X10:
>>> + case EC_DID_5VS5_X10:
>>> + ptbl->v5[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->v5[1] = 10;
>>> + break;
>>> + case EC_DID_12VS0:
>>> + ptbl->v12[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->v12[1] = 1;
>>> + break;
>>> + case EC_DID_12VS0_X2:
>>> + ptbl->v12[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->v12[1] = 2;
>>> + break;
>>> + case EC_DID_12VS0_X10:
>>> + ptbl->v12[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->v12[1] = 10;
>>> + break;
>>> + case EC_DID_VCOREA:
>>> + case EC_DID_VCOREB:
>>> + ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->vcore[1] = 1;
>>> + break;
>>> + case EC_DID_VCOREA_X2:
>>> + case EC_DID_VCOREB_X2:
>>> + ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->vcore[1] = 2;
>>> + break;
>>> + case EC_DID_VCOREA_X10:
>>> + case EC_DID_VCOREB_X10:
>>> + ptbl->vcore[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->vcore[1] = 10;
>>> + break;
>>> + case EC_DID_DC:
>>> + ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->vdc[1] = 1;
>>> + break;
>>> + case EC_DID_DC_X2:
>>> + ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->vdc[1] = 2;
>>> + break;
>>> + case EC_DID_DC_X10:
>>> + ptbl->vdc[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->vdc[1] = 10;
>>> + break;
>>> + case EC_DID_CURRENT:
>>> + ptbl->ec_current[0] = dym_tbl[i].hw_pin_num;
>>> + ptbl->ec_current[1] = 1;
>>> + break;
>>> + case EC_DID_SMBOEM0:
>>> + lmsensor_data->ec_smboem0.hw_pin_num =
>> dym_tbl[i].hw_pin_num;
>>> + break;
>>> + default:
>>> + break;
>>> + }
>>> + }
>>> +}
>>> +
>>> +static int get_ec_in_vbat_input(struct device *dev, long *val) {
>>> + unsigned int temp = 0;
>>> + unsigned long voltage = 0;
>>> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
>>> +
>>> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
>>> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
>>> + struct adv_ec_platform_data *adv_ec_data =
>>> +lmsensor_data->adv_ec_data;
>>> +
>>> + temp = read_ad_value(adv_ec_data, ptbl->vbat[0], ptbl->vbat[1]);
>>> +
>>> + if (profile->r2 != 0)
>>> + voltage = temp * (profile->r1 + profile->r2) / profile->r2;
>>> +
>>> + if (profile->resolution != 0)
>>> + voltage = temp * profile->resolution / 1000 / 1000;
>>> +
>>> + if (profile->offset != 0)
>>> + voltage += (int)profile->offset * 100;
>>> +
>>> + lmsensor_data->voltage[0] = 10 * voltage;
>>> +
>>> + *val = lmsensor_data->voltage[0];
>>> + return 0;
>>> +}
>>> +
>>> +static int get_ec_in_v5_input(struct device *dev, long *val) {
>>> + unsigned int temp;
>>> + unsigned long voltage = 0;
>>> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
>>> +
>>
>> Please no empty lines in variable declarations.
>>
>>> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
>>> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
>>> + struct adv_ec_platform_data *adv_ec_data =
>>> +lmsensor_data->adv_ec_data;
>>> +
>>> + temp = read_ad_value(adv_ec_data, ptbl->v5[0], ptbl->v5[1]);
>>> +
>>> + if (profile->r2 != 0)
>>> + voltage = temp * (profile->r1 + profile->r2) / profile->r2;
>>> +
>>> + if (profile->resolution != 0)
>>> + voltage = temp * profile->resolution / 1000 / 1000;
>>> +
>>> + if (profile->offset != 0)
>>> + voltage += (int)profile->offset * 100;
>>> +
>>> + lmsensor_data->voltage[1] = 10 * voltage;
>>> +
>>> + *val = lmsensor_data->voltage[1];
>>> + return 0;
>>> +}
>>> +
>>> +static int get_ec_in_v12_input(struct device *dev, long *val) {
>>> + int temp;
>>> + unsigned long voltage = 0;
>>> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
>>> +
>>> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
>>> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
>>> + struct adv_ec_platform_data *adv_ec_data =
>>> +lmsensor_data->adv_ec_data;
>>> +
>>> + temp = read_ad_value(adv_ec_data, ptbl->v12[0], ptbl->v12[1]);
>>> + if (temp == -1)
>>> + temp = read_ad_value(adv_ec_data, ptbl->vdc[0], ptbl->vdc[1]);
>>> +
>>> + if (profile->r2 != 0)
>>> + voltage = temp * (profile->r1 + profile->r2) / profile->r2;
>>> +
>>> + if (profile->resolution != 0)
>>> + voltage = temp * profile->resolution / 1000 / 1000;
>>> +
>>> + if (profile->offset != 0)
>>> + voltage += profile->offset * 100;
>>> +
>>> + lmsensor_data->voltage[2] = 10 * voltage;
>>> +
>>> + *val = lmsensor_data->voltage[2];
>>> + return 0;
>>> +}
>>> +
>>> +static int get_ec_in_vcore_input(struct device *dev, long *val) {
>>> + int temp;
>>> + unsigned int voltage = 0;
>>> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
>>> +
>>> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
>>> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
>>> + struct adv_ec_platform_data *adv_ec_data =
>>> +lmsensor_data->adv_ec_data;
>>> +
>>> + temp = read_ad_value(adv_ec_data, ptbl->vcore[0], ptbl->vcore[1]);
>>> +
>>> + if (profile->r2 != 0)
>>> + voltage = temp * (profile->r1 + profile->r2) / profile->r2;
>>> +
>>> + if (profile->resolution != 0)
>>> + voltage = temp * profile->resolution / 1000 / 1000;
>>> +
>>> + if (profile->offset != 0)
>>> + voltage += profile->offset * 100;
>>> +
>>> + lmsensor_data->voltage[3] = 10 * voltage;
>>> +
>>> + *val = lmsensor_data->voltage[3];
>>> + return 0;
>>> +}
>>> +
>>> +static int get_ec_current1_input(struct device *dev, long *val) {
>>> + int temp;
>>> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
>>> +
>>> + struct ec_hw_pin_table *ptbl = &lmsensor_data->pin_tbl;
>>> + struct adv_hwmon_profile *profile = lmsensor_data->profile;
>>> + struct adv_ec_platform_data *adv_ec_data =
>>> +lmsensor_data->adv_ec_data;
>>> +
>>> + temp = read_ad_value(adv_ec_data, ptbl->ec_current[0],
>>> +ptbl->ec_current[1]);
>>> +
>>> + if (profile->r2 != 0)
>>> + temp = temp * (profile->r1 + profile->r2) / profile->r2;
>>> +
>>> + if (profile->resolution != 0)
>>> + temp = temp * profile->resolution / 1000 / 1000;
>>> +
>>> + if (profile->offset != 0)
>>> + temp += profile->offset * 100;
>>> +
>>> + lmsensor_data->ec_current[3] = 10 * temp;
>>> +
>>> + *val = lmsensor_data->ec_current[3];
>>> + return 0;
>>> +}
>>> +
>>> +static int get_ec_cpu_temp(struct device *dev, long *val) {
>>> + #define EC_ACPI_THERMAL1_REMOTE_TEMP 0x61
>>
>> Pease move defines to top of file. Also, please use
>>
>> #define<space>IDENTIFER<tab>value
>>
>>> +
>>> + unsigned char value;
>>> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
>>> + struct adv_ec_platform_data *adv_ec_data =
>>> +lmsensor_data->adv_ec_data;
>>> +
>>> + read_acpi_value(adv_ec_data, EC_ACPI_THERMAL1_REMOTE_TEMP,
>> &value);
>>
>> This is not an appropriate function name for a device specific exported
>> function. The function name should have a prefix.
>>
>> Also, the error code from read_acpi_value needs to be checked and
>> handled.
>>
>>> + *val = 1000 * value;
>>> + return 0;
>>> +}
>>> +
>>> +static int get_ec_sys_temp(struct device *dev, long *val) {
>>> + #define EC_ACPI_THERMAL1_LOCAL_TEMP 0x60
>>> +
>>> + unsigned char value;
>>> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
>>> + struct adv_ec_platform_data *adv_ec_data =
>>> +lmsensor_data->adv_ec_data;
>>> +
>>> + read_acpi_value(adv_ec_data, EC_ACPI_THERMAL1_LOCAL_TEMP,
>> &value);
>>> + *val = 1000 * value;
>>> + return 0;
>>> +}
>>> +
>>> +
>>> +static int
>>> +ahc1ec0_read_in(struct device *dev, u32 attr, int channel, long *val)
>>> +{
>>> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
>>> +
>>> + if (!(lmsensor_data && lmsensor_data->profile))
>>> + return -EINVAL;
>>
>> This can not happen. Also, please don't use double negations.
>>
>>> +
>>> + if (attr == hwmon_in_input &&
>>> + lmsensor_data->profile->hwmon_in_list_cnt > channel) {
>>
>> This is unnecessary. Again, please drop all those unnecessary checks.
>>
>>> + int index = lmsensor_data->profile->hwmon_in_list[channel];
>>> + const struct ec_hwmon_attrs *ec_hwmon_attr =
>>> +&ec_hwmon_in_attr_template[index];
>>> +
>>> + return ec_hwmon_attr->read(dev, val);
>>> + }
>>> +
>>> + return -EOPNOTSUPP;
>>> +}
>>> +
>>> +static int
>>> +ahc1ec0_read_temp(struct device *dev, u32 attr, int channel, long
>>> +*val) {
>>> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
>>> +
>>> + if (!(lmsensor_data && lmsensor_data->profile))
>>> + return -EINVAL;
>>> +
>>> + switch (attr) {
>>> + case hwmon_temp_input:
>>> + if (lmsensor_data->profile->temp_list_cnt > channel) {
>>> + int index = lmsensor_data->profile->temp_list[channel];
>>> + const struct ec_hwmon_attrs *devec_hwmon_attr =
>>> + &ec_temp_attrs_template[index];
>>> +
>>> + return devec_hwmon_attr->read(dev, val);
>>> + }
>>> + return -EOPNOTSUPP;
>>> + case hwmon_temp_crit:
>>> + // both CPU temp and System temp are all this value
>>> + *val = 100000;
>>> + return 0;
>>> + default:
>>> + return -EOPNOTSUPP;
>>> + }
>>> +}
>>> +
>>> +static int
>>> +ahc1ec0_read_string(struct device *dev,
>>> + enum hwmon_sensor_types type,
>>> + u32 attr,
>>> + int channel,
>>> + const char **str)
>>> +{
>>> + struct ec_hwmon_data *lmsensor_data = dev_get_drvdata(dev);
>>> +
>>> + if (!(lmsensor_data && lmsensor_data->profile))
>>> + return -EINVAL;
>>> +
>>> + if ((type == hwmon_in && attr == hwmon_in_label) &&
>>> + (lmsensor_data->profile->hwmon_in_list_cnt > channel)) {
>>
>> lmsensor_data->profile->hwmon_in_list_cnt > channel is unnecessary, and
>> the () around it as well.
>>
>>> + int index = lmsensor_data->profile->hwmon_in_list[channel];
>>> + const struct ec_hwmon_attrs *ec_hwmon_attr =
>>> +&ec_hwmon_in_attr_template[index];
>>> +
>>> + *str = ec_hwmon_attr->name;
>>> + return 0;
>>> + }
>>> +
>>> + if ((type == hwmon_temp && attr == hwmon_temp_label) &&
>>> + (lmsensor_data->profile->temp_list_cnt > channel)) {
>>> + int index = lmsensor_data->profile->temp_list[channel];
>>> + const struct ec_hwmon_attrs *ec_hwmon_attr =
>>> +&ec_temp_attrs_template[index];
>>> +
>>> + *str = ec_hwmon_attr->name;
>>> + return 0;
>>> + }
>>> +
>>> + return -EOPNOTSUPP;
>>> +}
>>> +
>>> +static int
>>> +ahc1ec0_read(struct device *dev,
>>> + enum hwmon_sensor_types type,
>>> + u32 attr,
>>> + int channel,
>>> + long *val)
>>
>> Too many line splits. Please reduce to minuimum required.
>>
>>> +{
>>> + switch (type) {
>>> + case hwmon_in:
>>> + return ahc1ec0_read_in(dev, attr, channel, val);
>>> + case hwmon_temp:
>>> + return ahc1ec0_read_temp(dev, attr, channel, val);
>>> + default:
>>> + return -EOPNOTSUPP;
>>> + }
>>> +}
>>> +
>>> +static umode_t
>>> +ec_hwmon_in_visible(const void *data, u32 attr, int channel) {
>>> + switch (attr) {
>>> + case hwmon_in_input:
>>> + case hwmon_in_label:
>>> + return 0444;
>>> + default:
>>> + return 0;
>>> + }
>>
>> The code needs to take channel into account, and return 0 if a voltage
>> sensor is not supported.
>>
>>> +}
>>> +
>>> +static umode_t
>>> +ec_temp_in_visible(const void *data, u32 attr, int channel) {
>>> + switch (attr) {
>>> + case hwmon_temp_input:
>>> + case hwmon_temp_crit:
>>> + case hwmon_temp_label:
>>> + return 0444;
>>> + default:
>>> + return 0;
>>> + }
>>
>> The code needs to take channel into account, and return 0 if the second
>> temperature sensor is not supported.
>>
>>> +}
>>> +
>>> +static umode_t
>>> +ahc1ec0_is_visible(const void *data,
>>> + enum hwmon_sensor_types type, u32 attr, int
>> channel)
>>
>> Now this is a really odd (nd unnecessary) continuation line.
>>
>>> +{
>>> + switch (type) {
>>> + case hwmon_in:
>>> + return ec_hwmon_in_visible(data, attr, channel);
>>> + case hwmon_temp:
>>> + return ec_temp_in_visible(data, attr, channel);
>>> + default:
>>> + return 0;
>>> + }
>>> +}
>>> +
>>> +static const u32 ahc1ec0_in_config[] = {
>>> + HWMON_I_INPUT | HWMON_I_LABEL,
>>> + HWMON_I_INPUT | HWMON_I_LABEL,
>>> + HWMON_I_INPUT | HWMON_I_LABEL,
>>> + HWMON_I_INPUT | HWMON_I_LABEL,
>>> + 0
>>> +};
>>> +
>>> +static const struct hwmon_channel_info ahc1ec0_in = {
>>> + .type = hwmon_in,
>>> + .config = ahc1ec0_in_config,
>>> +};
>>> +
>>> +static const u32 ahc1ec0_temp_config[] = {
>>> + HWMON_T_INPUT | HWMON_T_CRIT | HWMON_T_LABEL,
>>
>> I don't think this works as intended. it only lists one temperature sensor, but
>> the code clearly suggests that there can be two.
>>
>>> + 0
>>> +};
>>> +
>>> +static const struct hwmon_channel_info ahc1ec0_temp = {
>>> + .type = hwmon_temp,
>>> + .config = ahc1ec0_temp_config,
>>> +};
>>> +
>>> +static const struct hwmon_channel_info *ahc1ec0_info[] = {
>>> + &ahc1ec0_in,
>>> + &ahc1ec0_temp,
>>> + NULL
>>> +};
>>> +
>>> +static const struct hwmon_ops ahc1ec0_hwmon_ops = {
>>> + .is_visible = ahc1ec0_is_visible,
>>> + .read = ahc1ec0_read,
>>> + .read_string = ahc1ec0_read_string,
>>> +};
>>> +
>>> +static const struct hwmon_chip_info ahc1ec0_chip_info = {
>>> + .ops = &ahc1ec0_hwmon_ops,
>>> + .info = ahc1ec0_info,
>>> +};
>>> +
>>> +static int adv_ec_hwmon_probe(struct platform_device *pdev) {
>>> + int ret;
>>> + u32 profile;
>>> + struct device *dev = &pdev->dev;
>>> + struct adv_ec_platform_data *adv_ec_data;
>>> + struct ec_hwmon_data *lmsensor_data;
>>> +
>>> + adv_ec_data = dev_get_drvdata(dev->parent);
>>> + if (!adv_ec_data)
>>> + return -EINVAL;
>>> +
>>> + ret = device_property_read_u32(dev->parent,
>> "advantech,hwmon-profile", &profile);
>>> + if (ret < 0) {
>>> + dev_err(dev, "get hwmon-profile failed! (%d)", ret);
>>> + return ret;
>>> + }
>>> +
>>> + if (!(profile < ARRAY_SIZE(advec_profile))) {
>>
>> Please no double negations.
>> if (profile >= ARRAY_SIZE(advec_profile)) is much easier to understand.
>>
>>> + dev_err(dev, "not support hwmon profile(%d)!\n", profile);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + lmsensor_data = devm_kzalloc(dev, sizeof(struct ec_hwmon_data),
>> GFP_KERNEL);
>>> + if (!lmsensor_data)
>>> + return -ENOMEM;
>>> +
>>> + lmsensor_data->adv_ec_data = adv_ec_data;
>>> + lmsensor_data->dev = dev;
>>> + dev_set_drvdata(dev, lmsensor_data);
>>> +
>>> + adv_ec_init_hwmon_profile(profile, lmsensor_data);
>>> +
>>> + lmsensor_data->hwmon_dev =
>> devm_hwmon_device_register_with_info(dev,
>>> + "ahc1ec0.hwmon", lmsensor_data, &ahc1ec0_chip_info,
>> NULL);
>>> +
>>> + return PTR_ERR_OR_ZERO(lmsensor_data->hwmon_dev);
>>> +}
>>> +
>>> +static struct platform_driver adv_hwmon_drv = {
>>> + .driver = {
>>> + .name = "ahc1ec0-hwmon",
>>> + },
>>> + .probe = adv_ec_hwmon_probe,
>>> +};
>>> +module_platform_driver(adv_hwmon_drv);
>>> +
>>> +MODULE_LICENSE("Dual BSD/GPL");
>>> +MODULE_ALIAS("platform:ahc1ec0-hwmon");
>>> +MODULE_DESCRIPTION("Advantech Embedded Controller HWMON
>> Driver.");
>>> +MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
>>> +MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@advantech.com.cn>");
>>> +MODULE_VERSION("1.0");
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v6 2/6] mfd: ahc1ec0: Add Advantech EC include file used by dt-bindings
2021-01-18 12:37 ` [PATCH v6 2/6] mfd: ahc1ec0: Add Advantech EC include file used by dt-bindings Campion Kang
@ 2021-02-04 10:32 ` Lee Jones
0 siblings, 0 replies; 20+ messages in thread
From: Lee Jones @ 2021-02-04 10:32 UTC (permalink / raw)
To: Campion Kang
Cc: Rob Herring, linux-kernel, devicetree, Jean Delvare,
Guenter Roeck, Wim Van Sebroeck, linux-hwmon, linux-watchdog,
AceLan Kao
On Mon, 18 Jan 2021, Campion Kang wrote:
> This files defines the sud-device types and hwmon profiles support by
> Advantech embedded controller.
>
> Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
> ---
> include/dt-bindings/mfd/ahc1ec0-dt.h | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
> create mode 100644 include/dt-bindings/mfd/ahc1ec0-dt.h
For my own reference (apply this as-is to your sign-off block):
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v6 3/6] dt-bindings: mfd: ahc1ec0.yaml: Add Advantech embedded controller - AHC1EC0
2021-01-18 12:37 ` [PATCH v6 3/6] dt-bindings: mfd: ahc1ec0.yaml: Add Advantech embedded controller - AHC1EC0 Campion Kang
@ 2021-02-05 21:21 ` Rob Herring
0 siblings, 0 replies; 20+ messages in thread
From: Rob Herring @ 2021-02-05 21:21 UTC (permalink / raw)
To: Campion Kang
Cc: Lee Jones, linux-kernel, devicetree, Jean Delvare, Guenter Roeck,
Wim Van Sebroeck, linux-hwmon, linux-watchdog, AceLan Kao
On Mon, Jan 18, 2021 at 08:37:46PM +0800, Campion Kang wrote:
> Add DT binding schema for Advantech embedded controller AHC1EC0.
>
> Changed since V5:
> - rename dt-bindings/mfd/ahc1ec0.h to dt-bindings/mfd/ahc1ec0-dt.h
> that found errors by bot 'make dt_binding_check'
>
> Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
> ---
> .../devicetree/bindings/mfd/ahc1ec0.yaml | 69 +++++++++++++++++++
> 1 file changed, 69 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mfd/ahc1ec0.yaml
>
> diff --git a/Documentation/devicetree/bindings/mfd/ahc1ec0.yaml b/Documentation/devicetree/bindings/mfd/ahc1ec0.yaml
> new file mode 100644
> index 000000000000..40af14bb9c0a
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/ahc1ec0.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/ahc1ec0.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Advantech Embedded Controller (AHC1EC0)
> +
> +maintainers:
> + - Campion Kang <campion.kang@advantech.com.tw>
> +
> +description: |
> + AHC1EC0 is one of the embedded controllers used by Advantech to provide several
> + functions such as watchdog, hwmon, brightness, etc. Advantech related applications
> + can control the whole system via these functions.
> +
> +properties:
> + compatible:
> + const: advantech,ahc1ec0
> +
> + advantech,sub-dev-nb:
> + description:
> + The number of sub-devices specified in the platform.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maxItems: 1
You don't need this, just count the length of the next property:
> +
> + advantech,sub-dev:
> + description:
> + A list of the sub-devices supported in the platform. Defines for the
> + appropriate values can found in dt-bindings/mfd/ahc1ec0-dt.h.
> + $ref: "/schemas/types.yaml#/definitions/uint32-array"
> + minItems: 1
> + maxItems: 6
But as I said before, this binding is odd. It doesn't look like how we
do any other MFD. Either we have child nodes or they are implicit.
> +
> + advantech,hwmon-profile:
> + description:
> + The number of sub-devices specified in the platform. Defines for the
> + hwmon profiles can found in dt-bindings/mfd/ahc1ec0-dt.
> + $ref: /schemas/types.yaml#/definitions/uint32
> + maxItems: 1
> +
> +required:
> + - compatible
> + - advantech,sub-dev-nb
> + - advantech,sub-dev
> +
> +if:
> + properties:
> + advantech,sub-dev:
> + contains:
> + const: 0x3
> +then:
> + required:
> + - advantech,hwmon-profile
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/mfd/ahc1ec0-dt.h>
> + ahc1ec0 {
> + compatible = "advantech,ahc1ec0";
> +
> + advantech,sub-dev-nb = <2>;
> + advantech,sub-dev = <AHC1EC0_SUBDEV_HWMON
> + AHC1EC0_SUBDEV_WDT>;
> +
> + advantech,hwmon-profile = <AHC1EC0_HWMON_PRO_UNO2271G>;
> + };
> --
> 2.17.1
>
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller
2021-01-18 12:37 ` [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller Campion Kang
2021-01-19 7:25 ` AceLan Kao
@ 2021-03-09 16:07 ` Lee Jones
[not found] ` <22025d6fb74e49a1835f89cfa0849990@Taipei11.ADVANTECH.CORP>
2021-03-19 10:01 ` Campion Kang
1 sibling, 2 replies; 20+ messages in thread
From: Lee Jones @ 2021-03-09 16:07 UTC (permalink / raw)
To: Campion Kang
Cc: Rob Herring, linux-kernel, devicetree, Jean Delvare,
Guenter Roeck, Wim Van Sebroeck, linux-hwmon, linux-watchdog,
AceLan Kao
On Mon, 18 Jan 2021, Campion Kang wrote:
> AHC1EC0 is the embedded controller driver for Advantech industrial
It would be nice to have the model number in the subject line.
Drop "driver".
> products. This provides sub-devices such as hwmon and watchdog, and
> also
"HWMON and Watchdog"
> expose functions for sub-devices to read/write the value to embedded
"exposes"
> controller.
>
> Changed since V5:
> - Kconfig: add "AHC1EC0" string to clearly define the EC name
> - fix the code according to reviewer's suggestion
> - remove unnecessary header files
> - change the structure name to lower case, align with others
> naming
>
> Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
> ---
> drivers/mfd/Kconfig | 10 +
> drivers/mfd/Makefile | 2 +
> drivers/mfd/ahc1ec0.c | 808 ++++++++++++++++++++++++++++++++++++
> include/linux/mfd/ahc1ec0.h | 276 ++++++++++++
> 4 files changed, 1096 insertions(+)
> create mode 100644 drivers/mfd/ahc1ec0.c
> create mode 100644 include/linux/mfd/ahc1ec0.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index bdfce7b15621..7d5fb5c17d9a 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -2154,5 +2154,15 @@ config MFD_INTEL_M10_BMC
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_AHC1EC0
> + tristate "Advantech AHC1EC0 Embedded Controller Module"
Please remove "Module"
> + depends on X86
> + select MFD_CORE
> + help
> + This is the core function that for Advantech EC drivers. It
> + includes the sub-devices such as hwmon, watchdog, etc. And also
> + provides expose functions for sub-devices to read/write the value
> + to embedded controller.
"This provides core functionality for the Advantech AHC1EC0 Embedded
Controller (EC) along with registration for HWMON and Watchdog
sub-devices. It also provides read and write APIs for communication
with the EC."
> endmenu
> endif
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 14fdb188af02..a6af9d8825f4 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -268,3 +268,5 @@ obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
> obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
> obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
> obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
> +
You don't need to space this out.
> +obj-$(CONFIG_MFD_AHC1EC0) += ahc1ec0.o
> diff --git a/drivers/mfd/ahc1ec0.c b/drivers/mfd/ahc1ec0.c
> new file mode 100644
> index 000000000000..015f4307a54e
> --- /dev/null
> +++ b/drivers/mfd/ahc1ec0.c
> @@ -0,0 +1,808 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Advantech embedded controller core driver AHC1EC0
Advantech AHC1EC0 Embedded Controller
> + * Copyright 2020 Advantech IIoT Group
This is out of date.
> + *
Drop this '\n' please.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/delay.h>
> +#include <linux/dmi.h>
> +#include <linux/errno.h>
> +#include <linux/mfd/ahc1ec0.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +
> +#define DRV_NAME "ahc1ec0"
Please don't do this. Just use the string in-place.
> +enum {
> + ADVEC_SUBDEV_BRIGHTNESS = 0,
> + ADVEC_SUBDEV_EEPROM,
> + ADVEC_SUBDEV_GPIO,
> + ADVEC_SUBDEV_HWMON,
> + ADVEC_SUBDEV_LED,
> + ADVEC_SUBDEV_WDT,
> + ADVEC_SUBDEV_MAX,
> +};
Are these arbitrary?
> +/* Wait IBF (Input Buffer Full) clear */
> +static int ec_wait_write(void)
> +{
> + int i;
> +
> + for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
> + if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_IBF) == 0)
> + return 0;
> +
> + udelay(EC_RETRY_UDELAY);
> + }
> +
> + return -ETIMEDOUT;
> +}
>
> +/* Wait OBF (Output Buffer Full) data ready */
> +static int ec_wait_read(void)
> +{
> + int i;
> +
> + for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
> + if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_OBF) != 0)
> + return 0;
> +
> + udelay(EC_RETRY_UDELAY);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +/* Read data from EC HW RAM, the process is the following:
> + * Step 0. Wait IBF clear to send command
> + * Step 1. Send read command to EC command port
> + * Step 2. Wait IBF clear that means command is got by EC
> + * Step 3. Send read address to EC data port
> + * Step 4. Wait OBF data ready
> + * Step 5. Get data from EC data port
> + */
> +int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char *data)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_HW_RAM_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + *data = inb(EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> +
> + return ret;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
EXPORT?
> +/* Write data to EC HW RAM
> + * Step 0. Wait IBF clear to send command
> + * Step 1. Send write command to EC command port
> + * Step 2. Wait IBF clear that means command is got by EC
> + * Step 3. Send write address to EC data port
> + * Step 4. Wait IBF clear that means command is got by EC
> + * Step 5. Send data to EC data port
> + */
> +int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char data)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_HW_RAM_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(data, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> +
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(write_hw_ram);
If you're going to export these, they should be in their own
namespace.
> +/* Get dynamic control table */
> +static int adv_get_dynamic_tab(struct adv_ec_platform_data *adv_ec_data)
> +{
> + int i, ret;
> + unsigned char pin_tmp, device_id;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + for (i = 0; i < EC_MAX_TBL_NUM; i++) {
> + adv_ec_data->dym_tbl[i].device_id = 0xff;
> + adv_ec_data->dym_tbl[i].hw_pin_num = 0xff;
> + }
> +
> + for (i = 0; i < EC_MAX_TBL_NUM; i++) {
> + ret = ec_wait_write();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
> + __LINE__);
Please remove all of this debug code.
> + goto error;
> + }
> + outb(EC_TBL_WRITE_ITEM, EC_COMMAND_PORT);
More basic commentary is required throughout I think.
> + ret = ec_wait_write();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + outb(i, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> +
> + /*
> + * If item is defined, EC will return item number.
> + * If table item is not defined, EC will return 0xFF.
> + */
> + pin_tmp = inb(EC_STATUS_PORT);
> + if (pin_tmp == 0xff) {
Please define all magic numbers.
> + dev_dbg(adv_ec_data->dev, "%s: inb(EC_STATUS_PORT)=0x%02x != 0xff.\n",
> + __func__, pin_tmp);
> + goto pass;
> + }
> +
> + ret = ec_wait_write();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + outb(EC_TBL_GET_PIN, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + pin_tmp = inb(EC_STATUS_PORT) & 0xff;
> + if (pin_tmp == 0xff) {
> + dev_dbg(adv_ec_data->dev, "%s: pin_tmp(0x%02X). line: %d\n", __func__,
> + pin_tmp, __LINE__);
> + goto pass;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_TBL_GET_DEVID, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + device_id = inb(EC_STATUS_PORT) & 0xff;
> +
> + dev_dbg(adv_ec_data->dev, "%s: device_id=0x%02X. line: %d\n", __func__,
> + device_id, __LINE__);
> +
> + adv_ec_data->dym_tbl[i].device_id = device_id;
> + adv_ec_data->dym_tbl[i].hw_pin_num = pin_tmp;
> + }
> +
> +pass:
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> + __func__, __LINE__);
Remove all _func_ and _LINE_ info. It's seldom helpful.
> + return ret;
> +}
> +
> +int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
What is 'ad'?
> + unsigned char multi)
> +{
> + int ret;
> + u32 ret_val;
> + unsigned int LSB, MSB;
> +
> + mutex_lock(&adv_ec_data->lock);
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_AD_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(hwpin, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_AD_LSB_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + LSB = inb(EC_STATUS_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_AD_MSB_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + MSB = inb(EC_STATUS_PORT);
> + ret_val = ((MSB << 8) | LSB) & 0x03FF;
> + ret_val = ret_val * multi * 100;
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return ret_val;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
dev_err()
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(read_ad_value);
> +
> +int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char *pvalue)
> +{
> + int ret;
> + unsigned char value;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_ACPI_RAM_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + value = inb(EC_STATUS_PORT);
> + *pvalue = value;
> +
> + mutex_unlock(&adv_ec_data->lock);
> +
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(read_acpi_value);
Namespace.
> +int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char value)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_ACPI_DATA_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(value, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
EXPORT?
I think this API (i.e. all of the functions above) should be moved
into drivers/platform. They really don't have a place in MFD.
> +int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue)
> +{
> + int ret;
> +
> + unsigned char gpio_status_value;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
> + mutex_unlock(&adv_ec_data->lock);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_STATUS_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + gpio_status_value = inb(EC_STATUS_PORT);
> +
> + *pvalue = gpio_status_value;
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> + return ret;
> +}
> +
> +int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_STATUS_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(value, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +
> +int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue)
> +{
> + int ret;
> + unsigned char gpio_dir_value;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
> + __LINE__);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_DIR_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + gpio_dir_value = inb(EC_STATUS_PORT);
> + *pvalue = gpio_dir_value;
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +
> +int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + dev_warn(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
> + __LINE__);
> +
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_DIR_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(value, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
All of the GPIO functions above should move into drivers/gpio.
> +int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(data, EC_COMMAND_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(write_hwram_command);
> +
> +static int adv_ec_get_productname(struct adv_ec_platform_data *adv_ec_data, char *product)
> +{
> + const char *vendor, *device;
> + int length = 0;
> +
> + /* Check it is Advantech board */
> + vendor = dmi_get_system_info(DMI_SYS_VENDOR);
> + if (memcmp(vendor, "Advantech", sizeof("Advantech")) != 0)
> + return -ENODEV;
> +
> + /* Get product model name */
> + device = dmi_get_system_info(DMI_PRODUCT_NAME);
> + if (device) {
> + while ((device[length] != ' ')
> + && (length < AMI_ADVANTECH_BOARD_ID_LENGTH))
> + length++;
> + memset(product, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
> + memmove(product, device, length);
> +
> + dev_info(adv_ec_data->dev, "BIOS Product Name = %s\n", product);
> +
> + return 0;
> + }
> +
> + dev_warn(adv_ec_data->dev, "This device is not Advantech Board (%s)!\n", product);
> +
> + return -ENODEV;
> +}
These should go into drivers/platform.
> +static const struct mfd_cell adv_ec_sub_cells[] = {
> + { .name = "adv-ec-brightness", },
> + { .name = "adv-ec-eeprom", },
> + { .name = "adv-ec-gpio", },
> + { .name = "ahc1ec0-hwmon", },
> + { .name = "adv-ec-led", },
> + { .name = "ahc1ec0-wdt", },
> +};
> +
> +static int adv_ec_init_ec_data(struct adv_ec_platform_data *adv_ec_data)
> +{
> + int ret;
> +
> + adv_ec_data->sub_dev_mask = 0;
> + adv_ec_data->sub_dev_nb = 0;
> + adv_ec_data->dym_tbl = NULL;
> + adv_ec_data->bios_product_name = NULL;
Why are pre-initialising these?
> + mutex_init(&adv_ec_data->lock);
> +
> + /* Get product name */
> + adv_ec_data->bios_product_name =
> + devm_kzalloc(adv_ec_data->dev, AMI_ADVANTECH_BOARD_ID_LENGTH, GFP_KERNEL);
> + if (!adv_ec_data->bios_product_name)
> + return -ENOMEM;
> +
> + memset(adv_ec_data->bios_product_name, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
Why are you doing this?
> + ret = adv_ec_get_productname(adv_ec_data, adv_ec_data->bios_product_name);
> + if (ret)
> + return ret;
> +
> + /* Get pin table */
> + adv_ec_data->dym_tbl = devm_kzalloc(adv_ec_data->dev,
> + EC_MAX_TBL_NUM * sizeof(struct ec_dynamic_table),
> + GFP_KERNEL);
> + if (!adv_ec_data->dym_tbl)
> + return -ENOMEM;
What does a dynamic table do?
> + ret = adv_get_dynamic_tab(adv_ec_data);
return adv_get_dynamic_tab();
> + return ret;
> +}
> +
> +static int adv_ec_parse_prop(struct adv_ec_platform_data *adv_ec_data)
> +{
> + int i, ret;
> + u32 nb, sub_dev[ADVEC_SUBDEV_MAX];
> +
> + ret = device_property_read_u32(adv_ec_data->dev, "advantech,sub-dev-nb", &nb);
Indexing devices is generally not a good strategy.
> + if (ret < 0) {
> + dev_err(adv_ec_data->dev, "get sub-dev-nb failed! (%d)\n", ret);
> + return ret;
> + }
> + adv_ec_data->sub_dev_nb = nb;
'nb' is not a good choice for a variable name.
> + ret = device_property_read_u32_array(adv_ec_data->dev, "advantech,sub-dev",
> + sub_dev, nb);
> + if (ret < 0) {
Is '> 0' valid?
> + dev_err(adv_ec_data->dev, "get sub-dev failed! (%d)\n", ret);
Please use proper error messages.
"Failed to read 'advantech,sub-dev' property"
> + return ret;
> + }
> +
> + for (i = 0; i < nb; i++) {
> + switch (sub_dev[i]) {
> + case ADVEC_SUBDEV_BRIGHTNESS:
> + case ADVEC_SUBDEV_EEPROM:
> + case ADVEC_SUBDEV_GPIO:
> + case ADVEC_SUBDEV_HWMON:
> + case ADVEC_SUBDEV_LED:
> + case ADVEC_SUBDEV_WDT:
> + adv_ec_data->sub_dev_mask |= BIT(sub_dev[i]);
> + break;
> + default:
> + dev_err(adv_ec_data->dev, "invalid prop value(%d)!\n",
> + sub_dev[i]);
> + }
> + }
> + dev_info(adv_ec_data->dev, "sub-dev mask = 0x%x\n", adv_ec_data->sub_dev_mask);
> +
> + return 0;
> +}
> +
> +static int adv_ec_probe(struct platform_device *pdev)
> +{
> + int ret, i;
> + struct device *dev = &pdev->dev;
> + struct adv_ec_platform_data *adv_ec_data;
This is not platform data. This is driver data.
struct adv_ec_ddata *ddata;
> + adv_ec_data = devm_kzalloc(dev, sizeof(struct adv_ec_platform_data), GFP_KERNEL);
sizeof(*adv_ec_data)
> + if (!adv_ec_data)
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, adv_ec_data);
> + adv_ec_data->dev = dev;
> +
> + ret = adv_ec_init_ec_data(adv_ec_data);
> + if (ret)
> + goto err_init_data;
> +
> + ret = adv_ec_parse_prop(adv_ec_data);
> + if (ret)
> + goto err_prop;
> +
> + /* check whether this EC has the following subdevices. */
> + for (i = 0; i < ARRAY_SIZE(adv_ec_sub_cells); i++) {
> + if (adv_ec_data->sub_dev_mask & BIT(i)) {
> + ret = mfd_add_hotplug_devices(dev, &adv_ec_sub_cells[i], 1);
Why have you chosen to use hotplug here?
> + dev_info(adv_ec_data->dev, "mfd_add_hotplug_devices[%d] %s\n", i,
> + adv_ec_sub_cells[i].name);
> + if (ret)
> + dev_err(dev, "failed to add %s subdevice: %d\n",
> + adv_ec_sub_cells[i].name, ret);
> + }
> + }
This is a mess!
Where are you pulling these devices from?
> + dev_info(adv_ec_data->dev, "Advantech EC probe done");
> +
> + return 0;
> +
> +err_prop:
> + dev_err(dev, "failed to probe\n");
> +
> +err_init_data:
> + mutex_destroy(&adv_ec_data->lock);
> +
> + dev_err(dev, "failed to init data\n");
You don't need 2 error messages in the error path.
> + return ret;
> +}
> +
> +static int adv_ec_remove(struct platform_device *pdev)
> +{
> + struct adv_ec_platform_data *adv_ec_data;
> +
> + adv_ec_data = dev_get_drvdata(&pdev->dev);
> +
> + mutex_destroy(&adv_ec_data->lock);
> +
> + mfd_remove_devices(&pdev->dev);
If you don't use the hotplug variant, you can use devm_* and omit
this.
> + return 0;
> +}
> +
> +static const struct of_device_id adv_ec_of_match[] __maybe_unused = {
> + {
> + .compatible = "advantech,ahc1ec0",
> + },
Put this on one line please.
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, adv_ec_of_match);
> +
> +static const struct acpi_device_id adv_ec_acpi_match[] __maybe_unused = {
> + {"AHC1EC0", 0},
Spaces inside the '{' and '}' please.
> + {},
',' here, but not on the one above. Please be consistent.
> +};
> +MODULE_DEVICE_TABLE(acpi, adv_ec_acpi_match);
> +
> +static struct platform_driver adv_ec_driver = {
> + .driver = {
> + .name = DRV_NAME,
> + .of_match_table = of_match_ptr(adv_ec_of_match),
> + .acpi_match_table = ACPI_PTR(adv_ec_acpi_match),
> + },
> + .probe = adv_ec_probe,
> + .remove = adv_ec_remove,
> +};
> +module_platform_driver(adv_ec_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:" DRV_NAME);
> +MODULE_DESCRIPTION("Advantech Embedded Controller core driver.");
Name as in the header.
> +MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
> +MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@advantech.com.cn>");
> +MODULE_VERSION("1.0");
Is this used?
> diff --git a/include/linux/mfd/ahc1ec0.h b/include/linux/mfd/ahc1ec0.h
> new file mode 100644
> index 000000000000..1b01e10c1fef
> --- /dev/null
> +++ b/include/linux/mfd/ahc1ec0.h
> @@ -0,0 +1,276 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +#ifndef __LINUX_MFD_AHC1EC0_H
> +#define __LINUX_MFD_AHC1EC0_H
> +
> +#include <linux/device.h>
> +
> +#define EC_COMMAND_PORT 0x29A /* EC I/O command port */
> +#define EC_STATUS_PORT 0x299 /* EC I/O data port */
> +
> +#define EC_RETRY_UDELAY 200 /* EC command retry delay in microseconds */
> +#define EC_MAX_TIMEOUT_COUNT 5000 /* EC command max retry count */
> +#define EC_COMMAND_BIT_OBF 0x01 /* Bit 0 is for OBF ready (Output buffer full) */
> +#define EC_COMMAND_BIT_IBF 0x02 /* Bit 1 is for IBF ready (Input buffer full) */
> +
> +/* Analog to digital converter command */
> +#define EC_AD_INDEX_WRITE 0x15 /* Write ADC port number into index */
> +#define EC_AD_LSB_READ 0x16 /* Read ADC LSB value from ADC port */
> +#define EC_AD_MSB_READ 0x1F /* Read ADC MSB value from ADC port */
> +
> +/* Voltage device ID */
> +#define EC_DID_SMBOEM0 0x28 /* SMBUS/I2C. Smbus channel 0 */
> +#define EC_DID_CMOSBAT 0x50 /* CMOS coin battery voltage */
> +#define EC_DID_CMOSBAT_X2 0x51 /* CMOS coin battery voltage*2 */
> +#define EC_DID_CMOSBAT_X10 0x52 /* CMOS coin battery voltage*10 */
> +#define EC_DID_5VS0 0x56 /* 5VS0 voltage */
> +#define EC_DID_5VS0_X2 0x57 /* 5VS0 voltage*2 */
> +#define EC_DID_5VS0_X10 0x58 /* 5VS0 voltage*10 */
> +#define EC_DID_5VS5 0x59 /* 5VS5 voltage */
> +#define EC_DID_5VS5_X2 0x5A /* 5VS5 voltage*2 */
> +#define EC_DID_5VS5_X10 0x5B /* 5VS5 voltage*10 */
> +#define EC_DID_12VS0 0x62 /* 12VS0 voltage */
> +#define EC_DID_12VS0_X2 0x63 /* 12VS0 voltage*2 */
> +#define EC_DID_12VS0_X10 0x64 /* 12VS0 voltage*10 */
> +#define EC_DID_VCOREA 0x65 /* CPU A core voltage */
> +#define EC_DID_VCOREA_X2 0x66 /* CPU A core voltage*2 */
> +#define EC_DID_VCOREA_X10 0x67 /* CPU A core voltage*10 */
> +#define EC_DID_VCOREB 0x68 /* CPU B core voltage */
> +#define EC_DID_VCOREB_X2 0x69 /* CPU B core voltage*2 */
> +#define EC_DID_VCOREB_X10 0x6A /* CPU B core voltage*10 */
> +#define EC_DID_DC 0x6B /* ADC. onboard voltage */
> +#define EC_DID_DC_X2 0x6C /* ADC. onboard voltage*2 */
> +#define EC_DID_DC_X10 0x6D /* ADC. onboard voltage*10 */
> +
> +/* Current device ID */
> +#define EC_DID_CURRENT 0x74
> +
> +/* ACPI commands */
> +#define EC_ACPI_RAM_READ 0x80
> +#define EC_ACPI_RAM_WRITE 0x81
> +
> +/*
> + * Dynamic control table commands
> + * The table includes HW pin number, Device ID, and Pin polarity
> + */
> +#define EC_TBL_WRITE_ITEM 0x20
> +#define EC_TBL_GET_PIN 0x21
> +#define EC_TBL_GET_DEVID 0x22
> +#define EC_MAX_TBL_NUM 32
> +
> +/* LED Device ID table */
> +#define EC_DID_LED_RUN 0xE1
> +#define EC_DID_LED_ERR 0xE2
> +#define EC_DID_LED_SYS_RECOVERY 0xE3
> +#define EC_DID_LED_D105_G 0xE4
> +#define EC_DID_LED_D106_G 0xE5
> +#define EC_DID_LED_D107_G 0xE6
> +
> +/* LED control HW RAM address 0xA0-0xAF */
> +#define EC_HWRAM_LED_BASE_ADDR 0xA0
> +#define EC_HWRAM_LED_PIN(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N))) // N:0-3
> +#define EC_HWRAM_LED_CTRL_HIBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 1)
> +#define EC_HWRAM_LED_CTRL_LOBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 2)
> +#define EC_HWRAM_LED_DEVICE_ID(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 3)
> +
> +/* LED control bit */
> +#define LED_CTRL_ENABLE_BIT() BIT(4)
> +#define LED_CTRL_INTCTL_BIT() BIT(5)
> +#define LED_CTRL_LEDBIT_MASK (0x03FF << 6)
> +#define LED_CTRL_POLARITY_MASK (0x000F << 0)
> +#define LED_CTRL_INTCTL_EXTERNAL 0
> +#define LED_CTRL_INTCTL_INTERNAL 1
> +
> +#define LED_DISABLE 0x0
> +#define LED_ON 0x1
> +#define LED_FAST 0x3
> +#define LED_NORMAL 0x5
> +#define LED_SLOW 0x7
> +#define LED_MANUAL 0xF
> +
> +#define LED_CTRL_LEDBIT_DISABLE 0x0000
> +#define LED_CTRL_LEDBIT_ON 0x03FF
> +#define LED_CTRL_LEDBIT_FAST 0x02AA
> +#define LED_CTRL_LEDBIT_NORMAL 0x0333
> +#define LED_CTRL_LEDBIT_SLOW 0x03E0
> +
> +/* Get the device name */
> +#define AMI_ADVANTECH_BOARD_ID_LENGTH 32
> +
> +/*
> + * Advantech Embedded Controller watchdog commands
> + * EC can send multi-stage watchdog event. System can setup watchdog event
> + * independently to make up event sequence.
> + */
> +#define EC_COMMANS_PORT_IBF_MASK 0x02
> +#define EC_RESET_EVENT 0x04
> +#define EC_WDT_START 0x28
> +#define EC_WDT_STOP 0x29
> +#define EC_WDT_RESET 0x2A
> +#define EC_WDT_BOOTTMEWDT_STOP 0x2B
> +
> +#define EC_HW_RAM 0x89
> +
> +#define EC_EVENT_FLAG 0x57
> +#define EC_ENABLE_DELAY_H 0x58
> +#define EC_ENABLE_DELAY_L 0x59
> +#define EC_POWER_BTN_TIME_H 0x5A
> +#define EC_POWER_BTN_TIME_L 0x5B
> +#define EC_RESET_DELAY_TIME_H 0x5E
> +#define EC_RESET_DELAY_TIME_L 0x5F
> +#define EC_PIN_DELAY_TIME_H 0x60
> +#define EC_PIN_DELAY_TIME_L 0x61
> +#define EC_SCI_DELAY_TIME_H 0x62
> +#define EC_SCI_DELAY_TIME_L 0x63
> +
> +/* EC ACPI commands */
> +#define EC_ACPI_DATA_READ 0x80
> +#define EC_ACPI_DATA_WRITE 0x81
> +
> +/* Brightness ACPI Addr */
> +#define BRIGHTNESS_ACPI_ADDR 0x50
> +
> +/* EC HW RAM commands */
> +#define EC_HW_EXTEND_RAM_READ 0x86
> +#define EC_HW_EXTEND_RAM_WRITE 0x87
> +#define EC_HW_RAM_READ 0x88
> +#define EC_HW_RAM_WRITE 0x89
> +
> +/* EC Smbus commands */
> +#define EC_SMBUS_CHANNEL_SET 0x8A /* Set selector number (SMBUS channel) */
> +#define EC_SMBUS_ENABLE_I2C 0x8C /* Enable channel I2C */
> +#define EC_SMBUS_DISABLE_I2C 0x8D /* Disable channel I2C */
> +
> +/* Smbus transmit protocol */
> +#define EC_SMBUS_PROTOCOL 0x00
> +
> +/* SMBUS status */
> +#define EC_SMBUS_STATUS 0x01
> +
> +/* SMBUS device slave address (bit0 must be 0) */
> +#define EC_SMBUS_SLV_ADDR 0x02
> +
> +/* SMBUS device command */
> +#define EC_SMBUS_CMD 0x03
> +
> +/* 0x04-0x24 Data In read process, return data are stored in this address */
> +#define EC_SMBUS_DATA 0x04
> +
> +#define EC_SMBUS_DAT_OFFSET(n) (EC_SMBUS_DATA + (n))
> +
> +/* SMBUS channel selector (0-4) */
> +#define EC_SMBUS_CHANNEL 0x2B
> +
> +/* EC SMBUS transmit Protocol code */
> +#define SMBUS_QUICK_WRITE 0x02 /* Write Quick Command */
> +#define SMBUS_QUICK_READ 0x03 /* Read Quick Command */
> +#define SMBUS_BYTE_SEND 0x04 /* Send Byte */
> +#define SMBUS_BYTE_RECEIVE 0x05 /* Receive Byte */
> +#define SMBUS_BYTE_WRITE 0x06 /* Write Byte */
> +#define SMBUS_BYTE_READ 0x07 /* Read Byte */
> +#define SMBUS_WORD_WRITE 0x08 /* Write Word */
> +#define SMBUS_WORD_READ 0x09 /* Read Word */
> +#define SMBUS_BLOCK_WRITE 0x0A /* Write Block */
> +#define SMBUS_BLOCK_READ 0x0B /* Read Block */
> +#define SMBUS_PROC_CALL 0x0C /* Process Call */
> +#define SMBUS_BLOCK_PROC_CALL 0x0D /* Write Block-Read Block Process Call */
> +#define SMBUS_I2C_READ_WRITE 0x0E /* I2C block Read-Write */
> +#define SMBUS_I2C_WRITE_READ 0x0F /* I2C block Write-Read */
> +
> +/* GPIO control commands */
> +#define EC_GPIO_INDEX_WRITE 0x10
> +#define EC_GPIO_STATUS_READ 0x11
> +#define EC_GPIO_STATUS_WRITE 0x12
> +#define EC_GPIO_DIR_READ 0x1D
> +#define EC_GPIO_DIR_WRITE 0x1E
> +
> +/* One Key Recovery commands */
> +#define EC_ONE_KEY_FLAG 0x9C
> +
> +/* ASG OEM commands */
> +#define EC_ASG_OEM 0xEA
> +#define EC_ASG_OEM_READ 0x00
> +#define EC_ASG_OEM_WRITE 0x01
> +#define EC_OEM_POWER_STATUS_VIN1 0X10
> +#define EC_OEM_POWER_STATUS_VIN2 0X11
> +#define EC_OEM_POWER_STATUS_BAT1 0X12
> +#define EC_OEM_POWER_STATUS_BAT2 0X13
> +
> +/* GPIO DEVICE ID */
> +#define EC_DID_ALTGPIO_0 0x10 /* 0x10 AltGpio0 User define gpio */
> +#define EC_DID_ALTGPIO_1 0x11 /* 0x11 AltGpio1 User define gpio */
> +#define EC_DID_ALTGPIO_2 0x12 /* 0x12 AltGpio2 User define gpio */
> +#define EC_DID_ALTGPIO_3 0x13 /* 0x13 AltGpio3 User define gpio */
> +#define EC_DID_ALTGPIO_4 0x14 /* 0x14 AltGpio4 User define gpio */
> +#define EC_DID_ALTGPIO_5 0x15 /* 0x15 AltGpio5 User define gpio */
> +#define EC_DID_ALTGPIO_6 0x16 /* 0x16 AltGpio6 User define gpio */
> +#define EC_DID_ALTGPIO_7 0x17 /* 0x17 AltGpio7 User define gpio */
> +
> +/* Lmsensor Chip Register */
> +#define NSLM96163_CHANNEL 0x02
> +
> +/* NS_LM96163 address 0x98 */
> +#define NSLM96163_ADDR 0x98
> +
> +/* LM96163 index(0x00) Local Temperature (Signed MSB) */
> +#define NSLM96163_LOC_TEMP 0x00
> +
> +/* HWMON registers */
> +#define INA266_REG_VOLTAGE 0x02 /* 1.25mV */
> +#define INA266_REG_POWER 0x03 /* 25mW */
> +#define INA266_REG_CURRENT 0x04 /* 1mA */
> +
> +struct ec_hw_pin_table {
> + unsigned int vbat[2];
> + unsigned int v5[2];
> + unsigned int v12[2];
> + unsigned int vcore[2];
> + unsigned int vdc[2];
> + unsigned int ec_current[2];
> + unsigned int power[2];
> +};
> +
> +struct ec_dynamic_table {
> + unsigned char device_id;
> + unsigned char hw_pin_num;
> +};
> +
> +struct ec_smbuso_em0 {
> + unsigned char hw_pin_num;
> +};
> +
> +struct pled_hw_pin_tbl {
> + unsigned int pled[6];
> +};
> +
> +struct adv_ec_platform_data {
> + char *bios_product_name;
Where is this used?
> + int sub_dev_nb;
> + u32 sub_dev_mask;
> + struct mutex lock;
> + struct device *dev;
> + struct class *adv_ec_class;
> +
> + struct ec_dynamic_table *dym_tbl;
> +};
Check whether all of these really need to be in device data i.e. check
that they are all used in sub-devices.
> +int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
> + unsigned char multi);
> +int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char *pvalue);
> +int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char value);
> +int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char *data);
> +int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char data);
> +int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data);
> +int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue);
> +int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value);
> +int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue);
> +int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value);
> +
> +#endif /* __LINUX_MFD_AHC1EC0_H */
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: FW: [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller
[not found] ` <22025d6fb74e49a1835f89cfa0849990@Taipei11.ADVANTECH.CORP>
@ 2021-03-12 7:14 ` Campion Kang
0 siblings, 0 replies; 20+ messages in thread
From: Campion Kang @ 2021-03-12 7:14 UTC (permalink / raw)
To: Campion.Kang, linux-watchdog
sorry ,
Test whether this letter will be returned as a spam
Campion.Kang <Campion.Kang@advantech.com.tw> 於 2021年3月12日 週五 下午2:57寫道：
>
> test
>
> >-----Original Message-----
> >From: Lee Jones <lee.jones@linaro.org>
> >Sent: Wednesday, March 10, 2021 12:08 AM
> >To: Campion.Kang <Campion.Kang@advantech.com.tw>
> >Cc: Rob Herring <robh+dt@kernel.org>; linux-kernel@vger.kernel.org;
> >devicetree@vger.kernel.org; Jean Delvare <jdelvare@suse.com>; Guenter Roeck
> ><linux@roeck-us.net>; Wim Van Sebroeck <wim@linux-watchdog.org>;
> >linux-hwmon@vger.kernel.org; linux-watchdog@vger.kernel.org; AceLan Kao
> ><chia-lin.kao@canonical.com>
> >Subject: Re: [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech
> >embedded controller
> >
> >On Mon, 18 Jan 2021, Campion Kang wrote:
> >
> >> AHC1EC0 is the embedded controller driver for Advantech industrial
> >
> >It would be nice to have the model number in the subject line.
> >
> >Drop "driver".
> >
> >> products. This provides sub-devices such as hwmon and watchdog, and
> >> also
> >
> >"HWMON and Watchdog"
> >
> >> expose functions for sub-devices to read/write the value to embedded
> >
> >"exposes"
> >
> >> controller.
> >>
> >> Changed since V5:
> >> - Kconfig: add "AHC1EC0" string to clearly define the EC name
> >> - fix the code according to reviewer's suggestion
> >> - remove unnecessary header files
> >> - change the structure name to lower case, align with others
> >> naming
> >>
> >> Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
> >> ---
> >> drivers/mfd/Kconfig | 10 +
> >> drivers/mfd/Makefile | 2 +
> >> drivers/mfd/ahc1ec0.c | 808
> >++++++++++++++++++++++++++++++++++++
> >> include/linux/mfd/ahc1ec0.h | 276 ++++++++++++
> >> 4 files changed, 1096 insertions(+)
> >> create mode 100644 drivers/mfd/ahc1ec0.c
> >> create mode 100644 include/linux/mfd/ahc1ec0.h
> >>
> >> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> >> index bdfce7b15621..7d5fb5c17d9a 100644
> >> --- a/drivers/mfd/Kconfig
> >> +++ b/drivers/mfd/Kconfig
> >> @@ -2154,5 +2154,15 @@ config MFD_INTEL_M10_BMC
> >> additional drivers must be enabled in order to use the functionality
> >> of the device.
> >>
> >> +config MFD_AHC1EC0
> >> + tristate "Advantech AHC1EC0 Embedded Controller Module"
> >
> >Please remove "Module"
> >
> >> + depends on X86
> >> + select MFD_CORE
> >> + help
> >> + This is the core function that for Advantech EC drivers. It
> >> + includes the sub-devices such as hwmon, watchdog, etc. And also
> >> + provides expose functions for sub-devices to read/write the value
> >> + to embedded controller.
> >
> >"This provides core functionality for the Advantech AHC1EC0 Embedded
> >Controller (EC) along with registration for HWMON and Watchdog
> >sub-devices. It also provides read and write APIs for communication
> >with the EC."
> >
> >> endmenu
> >> endif
> >> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> >> index 14fdb188af02..a6af9d8825f4 100644
> >> --- a/drivers/mfd/Makefile
> >> +++ b/drivers/mfd/Makefile
> >> @@ -268,3 +268,5 @@ obj-$(CONFIG_MFD_KHADAS_MCU) +=
> >khadas-mcu.o
> >> obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
> >> obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
> >> obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
> >> +
> >
> >You don't need to space this out.
> >
> >> +obj-$(CONFIG_MFD_AHC1EC0) += ahc1ec0.o
> >> diff --git a/drivers/mfd/ahc1ec0.c b/drivers/mfd/ahc1ec0.c
> >> new file mode 100644
> >> index 000000000000..015f4307a54e
> >> --- /dev/null
> >> +++ b/drivers/mfd/ahc1ec0.c
> >> @@ -0,0 +1,808 @@
> >> +// SPDX-License-Identifier: GPL-2.0-only
> >> +/*
> >> + * Advantech embedded controller core driver AHC1EC0
> >
> >Advantech AHC1EC0 Embedded Controller
> >
> >> + * Copyright 2020 Advantech IIoT Group
> >
> >This is out of date.
> >
> >> + *
> >
> >Drop this '\n' please.
> >
> >> + */
> >> +
> >> +#include <linux/acpi.h>
> >> +#include <linux/delay.h>
> >> +#include <linux/dmi.h>
> >> +#include <linux/errno.h>
> >> +#include <linux/mfd/ahc1ec0.h>
> >> +#include <linux/mfd/core.h>
> >> +#include <linux/module.h>
> >> +#include <linux/mutex.h>
> >> +#include <linux/of_platform.h>
> >> +#include <linux/platform_device.h>
> >> +
> >> +#define DRV_NAME "ahc1ec0"
> >
> >Please don't do this. Just use the string in-place.
> >
> >> +enum {
> >> + ADVEC_SUBDEV_BRIGHTNESS = 0,
> >> + ADVEC_SUBDEV_EEPROM,
> >> + ADVEC_SUBDEV_GPIO,
> >> + ADVEC_SUBDEV_HWMON,
> >> + ADVEC_SUBDEV_LED,
> >> + ADVEC_SUBDEV_WDT,
> >> + ADVEC_SUBDEV_MAX,
> >> +};
> >
> >Are these arbitrary?
> >
> >> +/* Wait IBF (Input Buffer Full) clear */
> >> +static int ec_wait_write(void)
> >> +{
> >> + int i;
> >> +
> >> + for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
> >> + if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_IBF) == 0)
> >> + return 0;
> >> +
> >> + udelay(EC_RETRY_UDELAY);
> >> + }
> >> +
> >> + return -ETIMEDOUT;
> >> +}
> >>
> >> +/* Wait OBF (Output Buffer Full) data ready */
> >> +static int ec_wait_read(void)
> >> +{
> >> + int i;
> >> +
> >> + for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
> >> + if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_OBF) != 0)
> >> + return 0;
> >> +
> >> + udelay(EC_RETRY_UDELAY);
> >> + }
> >> +
> >> + return -ETIMEDOUT;
> >> +}
> >> +
> >> +/* Read data from EC HW RAM, the process is the following:
> >> + * Step 0. Wait IBF clear to send command
> >> + * Step 1. Send read command to EC command port
> >> + * Step 2. Wait IBF clear that means command is got by EC
> >> + * Step 3. Send read address to EC data port
> >> + * Step 4. Wait OBF data ready
> >> + * Step 5. Get data from EC data port
> >> + */
> >> +int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char
> >addr, unsigned char *data)
> >> +{
> >> + int ret;
> >> +
> >> + mutex_lock(&adv_ec_data->lock);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_HW_RAM_READ, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(addr, EC_STATUS_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret)
> >> + goto error;
> >> + *data = inb(EC_STATUS_PORT);
> >> +
> >> + mutex_unlock(&adv_ec_data->lock);
> >> +
> >> + return ret;
> >> +
> >> +error:
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> >__func__,
> >> + __LINE__);
> >> +
> >> + return ret;
> >> +}
> >
> >EXPORT?
> >
> >> +/* Write data to EC HW RAM
> >> + * Step 0. Wait IBF clear to send command
> >> + * Step 1. Send write command to EC command port
> >> + * Step 2. Wait IBF clear that means command is got by EC
> >> + * Step 3. Send write address to EC data port
> >> + * Step 4. Wait IBF clear that means command is got by EC
> >> + * Step 5. Send data to EC data port
> >> + */
> >> +int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char
> >addr, unsigned char data)
> >> +{
> >> + int ret;
> >> +
> >> + mutex_lock(&adv_ec_data->lock);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_HW_RAM_WRITE, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(addr, EC_STATUS_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(data, EC_STATUS_PORT);
> >> +
> >> + mutex_unlock(&adv_ec_data->lock);
> >> +
> >> + return 0;
> >> +
> >> +error:
> >> + mutex_unlock(&adv_ec_data->lock);
> >> +
> >> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> >__func__,
> >> + __LINE__);
> >> +
> >> + return ret;
> >> +}
> >> +EXPORT_SYMBOL_GPL(write_hw_ram);
> >
> >If you're going to export these, they should be in their own
> >namespace.
> >
> >> +/* Get dynamic control table */
> >> +static int adv_get_dynamic_tab(struct adv_ec_platform_data *adv_ec_data)
> >> +{
> >> + int i, ret;
> >> + unsigned char pin_tmp, device_id;
> >> +
> >> + mutex_lock(&adv_ec_data->lock);
> >> +
> >> + for (i = 0; i < EC_MAX_TBL_NUM; i++) {
> >> + adv_ec_data->dym_tbl[i].device_id = 0xff;
> >> + adv_ec_data->dym_tbl[i].hw_pin_num = 0xff;
> >> + }
> >> +
> >> + for (i = 0; i < EC_MAX_TBL_NUM; i++) {
> >> + ret = ec_wait_write();
> >> + if (ret) {
> >> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n",
> >__func__,
> >> + __LINE__);
> >
> >Please remove all of this debug code.
> >
> >> + goto error;
> >> + }
> >> + outb(EC_TBL_WRITE_ITEM, EC_COMMAND_PORT);
> >
> >More basic commentary is required throughout I think.
> >
> >> + ret = ec_wait_write();
> >> + if (ret) {
> >> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n",
> >__func__,
> >> + __LINE__);
> >> + goto error;
> >> + }
> >> + outb(i, EC_STATUS_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret) {
> >> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n",
> >__func__,
> >> + __LINE__);
> >> + goto error;
> >> + }
> >> +
> >> + /*
> >> + * If item is defined, EC will return item number.
> >> + * If table item is not defined, EC will return 0xFF.
> >> + */
> >> + pin_tmp = inb(EC_STATUS_PORT);
> >> + if (pin_tmp == 0xff) {
> >
> >Please define all magic numbers.
> >
> >> + dev_dbg(adv_ec_data->dev, "%s:
> >inb(EC_STATUS_PORT)=0x%02x != 0xff.\n",
> >> + __func__, pin_tmp);
> >> + goto pass;
> >> + }
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret) {
> >> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n",
> >__func__,
> >> + __LINE__);
> >> + goto error;
> >> + }
> >> + outb(EC_TBL_GET_PIN, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret) {
> >> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n",
> >__func__,
> >> + __LINE__);
> >> + goto error;
> >> + }
> >> + pin_tmp = inb(EC_STATUS_PORT) & 0xff;
> >> + if (pin_tmp == 0xff) {
> >> + dev_dbg(adv_ec_data->dev, "%s: pin_tmp(0x%02X). line: %d\n",
> >__func__,
> >> + pin_tmp, __LINE__);
> >> + goto pass;
> >> + }
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_TBL_GET_DEVID, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret) {
> >> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n",
> >__func__,
> >> + __LINE__);
> >> + goto error;
> >> + }
> >> + device_id = inb(EC_STATUS_PORT) & 0xff;
> >> +
> >> + dev_dbg(adv_ec_data->dev, "%s: device_id=0x%02X. line: %d\n",
> >__func__,
> >> + device_id, __LINE__);
> >> +
> >> + adv_ec_data->dym_tbl[i].device_id = device_id;
> >> + adv_ec_data->dym_tbl[i].hw_pin_num = pin_tmp;
> >> + }
> >> +
> >> +pass:
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + return 0;
> >> +
> >> +error:
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> >> + __func__, __LINE__);
> >
> >Remove all _func_ and _LINE_ info. It's seldom helpful.
> >
> >> + return ret;
> >> +}
> >> +
> >> +int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned
> >char hwpin,
> >
> >What is 'ad'?
> >
> >> + unsigned char multi)
> >> +{
> >> + int ret;
> >> + u32 ret_val;
> >> + unsigned int LSB, MSB;
> >> +
> >> + mutex_lock(&adv_ec_data->lock);
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_AD_INDEX_WRITE, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(hwpin, EC_STATUS_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret)
> >> + goto error;
> >> +
> >> + if (inb(EC_STATUS_PORT) == 0xff) {
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + return -1;
> >> + }
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_AD_LSB_READ, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret)
> >> + goto error;
> >> + LSB = inb(EC_STATUS_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_AD_MSB_READ, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret)
> >> + goto error;
> >> + MSB = inb(EC_STATUS_PORT);
> >> + ret_val = ((MSB << 8) | LSB) & 0x03FF;
> >> + ret_val = ret_val * multi * 100;
> >> +
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + return ret_val;
> >> +
> >> +error:
> >> + mutex_unlock(&adv_ec_data->lock);
> >> +
> >> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> >__func__,
> >> + __LINE__);
> >
> >dev_err()
> >
> >> + return ret;
> >> +}
> >> +EXPORT_SYMBOL_GPL(read_ad_value);
> >> +
> >> +int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned
> >char addr,
> >> + unsigned char *pvalue)
> >> +{
> >> + int ret;
> >> + unsigned char value;
> >> +
> >> + mutex_lock(&adv_ec_data->lock);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_ACPI_RAM_READ, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(addr, EC_STATUS_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret)
> >> + goto error;
> >> + value = inb(EC_STATUS_PORT);
> >> + *pvalue = value;
> >> +
> >> + mutex_unlock(&adv_ec_data->lock);
> >> +
> >> + return 0;
> >> +
> >> +error:
> >> + mutex_unlock(&adv_ec_data->lock);
> >> +
> >> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> >__func__,
> >> + __LINE__);
> >> +
> >> + return ret;
> >> +}
> >> +EXPORT_SYMBOL_GPL(read_acpi_value);
> >
> >Namespace.
> >
> >> +int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned
> >char addr,
> >> + unsigned char value)
> >> +{
> >> + int ret;
> >> +
> >> + mutex_lock(&adv_ec_data->lock);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_ACPI_DATA_WRITE, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(addr, EC_STATUS_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(value, EC_STATUS_PORT);
> >> +
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + return 0;
> >> +
> >> +error:
> >> + mutex_unlock(&adv_ec_data->lock);
> >> +
> >> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> >__func__,
> >> + __LINE__);
> >> +
> >> + return ret;
> >> +}
> >
> >EXPORT?
> >
> >I think this API (i.e. all of the functions above) should be moved
> >into drivers/platform. They really don't have a place in MFD.
> >
> >> +int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned
> >char PinNumber,
> >> + unsigned char *pvalue)
> >> +{
> >> + int ret;
> >> +
> >> + unsigned char gpio_status_value;
> >> +
> >> + mutex_lock(&adv_ec_data->lock);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(PinNumber, EC_STATUS_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret)
> >> + goto error;
> >> +
> >> + if (inb(EC_STATUS_PORT) == 0xff) {
> >> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n",
> >__func__);
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + return -1;
> >> + }
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_GPIO_STATUS_READ, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret)
> >> + goto error;
> >> + gpio_status_value = inb(EC_STATUS_PORT);
> >> +
> >> + *pvalue = gpio_status_value;
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + return 0;
> >> +
> >> +error:
> >> + mutex_unlock(&adv_ec_data->lock);
> >> +
> >> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> >__func__,
> >> + __LINE__);
> >> + return ret;
> >> +}
> >> +
> >> +int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned
> >char PinNumber,
> >> + unsigned char value)
> >> +{
> >> + int ret;
> >> +
> >> + mutex_lock(&adv_ec_data->lock);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(PinNumber, EC_STATUS_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret)
> >> + goto error;
> >> +
> >> + if (inb(EC_STATUS_PORT) == 0xff) {
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n",
> >__func__);
> >> + return -1;
> >> + }
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_GPIO_STATUS_WRITE, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(value, EC_STATUS_PORT);
> >> +
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + return 0;
> >> +
> >> +error:
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d",
> >__func__,
> >> + __LINE__);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char
> >PinNumber,
> >> + unsigned char *pvalue)
> >> +{
> >> + int ret;
> >> + unsigned char gpio_dir_value;
> >> +
> >> + mutex_lock(&adv_ec_data->lock);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(PinNumber, EC_STATUS_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret)
> >> + goto error;
> >> +
> >> + if (inb(EC_STATUS_PORT) == 0xff) {
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n",
> >__func__,
> >> + __LINE__);
> >> + return -1;
> >> + }
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_GPIO_DIR_READ, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret)
> >> + goto error;
> >> + gpio_dir_value = inb(EC_STATUS_PORT);
> >> + *pvalue = gpio_dir_value;
> >> +
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + return 0;
> >> +
> >> +error:
> >> + mutex_unlock(&adv_ec_data->lock);
> >> +
> >> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> >__func__,
> >> + __LINE__);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned
> >char PinNumber,
> >> + unsigned char value)
> >> +{
> >> + int ret;
> >> +
> >> + mutex_lock(&adv_ec_data->lock);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(PinNumber, EC_STATUS_PORT);
> >> +
> >> + ret = ec_wait_read();
> >> + if (ret)
> >> + goto error;
> >> +
> >> + if (inb(EC_STATUS_PORT) == 0xff) {
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + dev_warn(adv_ec_data->dev, "%s: Read Pin Number error!! line:
> >%d\n", __func__,
> >> + __LINE__);
> >> +
> >> + return -1;
> >> + }
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(EC_GPIO_DIR_WRITE, EC_COMMAND_PORT);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(value, EC_STATUS_PORT);
> >> +
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + return 0;
> >> +
> >> +error:
> >> + mutex_unlock(&adv_ec_data->lock);
> >> +
> >> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> >__func__,
> >> + __LINE__);
> >> +
> >> + return ret;
> >> +}
> >
> >All of the GPIO functions above should move into drivers/gpio.
> >
> >> +int write_hwram_command(struct adv_ec_platform_data *adv_ec_data,
> >unsigned char data)
> >> +{
> >> + int ret;
> >> +
> >> + mutex_lock(&adv_ec_data->lock);
> >> +
> >> + ret = ec_wait_write();
> >> + if (ret)
> >> + goto error;
> >> + outb(data, EC_COMMAND_PORT);
> >> +
> >> + mutex_unlock(&adv_ec_data->lock);
> >> + return 0;
> >> +
> >> +error:
> >> + mutex_unlock(&adv_ec_data->lock);
> >> +
> >> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> >__func__,
> >> + __LINE__);
> >> +
> >> + return ret;
> >> +}
> >> +EXPORT_SYMBOL_GPL(write_hwram_command);
> >> +
> >> +static int adv_ec_get_productname(struct adv_ec_platform_data
> >*adv_ec_data, char *product)
> >> +{
> >> + const char *vendor, *device;
> >> + int length = 0;
> >> +
> >> + /* Check it is Advantech board */
> >> + vendor = dmi_get_system_info(DMI_SYS_VENDOR);
> >> + if (memcmp(vendor, "Advantech", sizeof("Advantech")) != 0)
> >> + return -ENODEV;
> >> +
> >> + /* Get product model name */
> >> + device = dmi_get_system_info(DMI_PRODUCT_NAME);
> >> + if (device) {
> >> + while ((device[length] != ' ')
> >> + && (length < AMI_ADVANTECH_BOARD_ID_LENGTH))
> >> + length++;
> >> + memset(product, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
> >> + memmove(product, device, length);
> >> +
> >> + dev_info(adv_ec_data->dev, "BIOS Product Name = %s\n", product);
> >> +
> >> + return 0;
> >> + }
> >> +
> >> + dev_warn(adv_ec_data->dev, "This device is not Advantech Board (%s)!\n",
> >product);
> >> +
> >> + return -ENODEV;
> >> +}
> >
> >These should go into drivers/platform.
> >
> >> +static const struct mfd_cell adv_ec_sub_cells[] = {
> >> + { .name = "adv-ec-brightness", },
> >> + { .name = "adv-ec-eeprom", },
> >> + { .name = "adv-ec-gpio", },
> >> + { .name = "ahc1ec0-hwmon", },
> >> + { .name = "adv-ec-led", },
> >> + { .name = "ahc1ec0-wdt", },
> >> +};
> >> +
> >> +static int adv_ec_init_ec_data(struct adv_ec_platform_data *adv_ec_data)
> >> +{
> >> + int ret;
> >> +
> >> + adv_ec_data->sub_dev_mask = 0;
> >> + adv_ec_data->sub_dev_nb = 0;
> >> + adv_ec_data->dym_tbl = NULL;
> >> + adv_ec_data->bios_product_name = NULL;
> >
> >Why are pre-initialising these?
> >
> >> + mutex_init(&adv_ec_data->lock);
> >> +
> >> + /* Get product name */
> >> + adv_ec_data->bios_product_name =
> >> + devm_kzalloc(adv_ec_data->dev,
> >AMI_ADVANTECH_BOARD_ID_LENGTH, GFP_KERNEL);
> >> + if (!adv_ec_data->bios_product_name)
> >> + return -ENOMEM;
> >> +
> >> + memset(adv_ec_data->bios_product_name, 0,
> >AMI_ADVANTECH_BOARD_ID_LENGTH);
> >
> >Why are you doing this?
> >
> >> + ret = adv_ec_get_productname(adv_ec_data,
> >adv_ec_data->bios_product_name);
> >> + if (ret)
> >> + return ret;
> >> +
> >> + /* Get pin table */
> >> + adv_ec_data->dym_tbl = devm_kzalloc(adv_ec_data->dev,
> >> + EC_MAX_TBL_NUM * sizeof(struct ec_dynamic_table),
> >> + GFP_KERNEL);
> >> + if (!adv_ec_data->dym_tbl)
> >> + return -ENOMEM;
> >
> >What does a dynamic table do?
> >
> >> + ret = adv_get_dynamic_tab(adv_ec_data);
> >
> >return adv_get_dynamic_tab();
> >
> >> + return ret;
> >> +}
> >> +
> >> +static int adv_ec_parse_prop(struct adv_ec_platform_data *adv_ec_data)
> >> +{
> >> + int i, ret;
> >> + u32 nb, sub_dev[ADVEC_SUBDEV_MAX];
> >> +
> >> + ret = device_property_read_u32(adv_ec_data->dev,
> >"advantech,sub-dev-nb", &nb);
> >
> >Indexing devices is generally not a good strategy.
> >
> >> + if (ret < 0) {
> >> + dev_err(adv_ec_data->dev, "get sub-dev-nb failed! (%d)\n", ret);
> >> + return ret;
> >> + }
> >> + adv_ec_data->sub_dev_nb = nb;
> >
> >'nb' is not a good choice for a variable name.
> >
> >> + ret = device_property_read_u32_array(adv_ec_data->dev,
> >"advantech,sub-dev",
> >> + sub_dev, nb);
> >> + if (ret < 0) {
> >
> >Is '> 0' valid?
> >
> >> + dev_err(adv_ec_data->dev, "get sub-dev failed! (%d)\n", ret);
> >
> >Please use proper error messages.
> >
> >"Failed to read 'advantech,sub-dev' property"
> >
> >> + return ret;
> >> + }
> >> +
> >> + for (i = 0; i < nb; i++) {
> >> + switch (sub_dev[i]) {
> >> + case ADVEC_SUBDEV_BRIGHTNESS:
> >> + case ADVEC_SUBDEV_EEPROM:
> >> + case ADVEC_SUBDEV_GPIO:
> >> + case ADVEC_SUBDEV_HWMON:
> >> + case ADVEC_SUBDEV_LED:
> >> + case ADVEC_SUBDEV_WDT:
> >> + adv_ec_data->sub_dev_mask |= BIT(sub_dev[i]);
> >> + break;
> >> + default:
> >> + dev_err(adv_ec_data->dev, "invalid prop value(%d)!\n",
> >> + sub_dev[i]);
> >> + }
> >> + }
> >> + dev_info(adv_ec_data->dev, "sub-dev mask = 0x%x\n",
> >adv_ec_data->sub_dev_mask);
> >> +
> >> + return 0;
> >> +}
> >> +
> >> +static int adv_ec_probe(struct platform_device *pdev)
> >> +{
> >> + int ret, i;
> >> + struct device *dev = &pdev->dev;
> >> + struct adv_ec_platform_data *adv_ec_data;
> >
> >This is not platform data. This is driver data.
> >
> > struct adv_ec_ddata *ddata;
> >
> >> + adv_ec_data = devm_kzalloc(dev, sizeof(struct adv_ec_platform_data),
> >GFP_KERNEL);
> >
> >sizeof(*adv_ec_data)
> >
> >> + if (!adv_ec_data)
> >> + return -ENOMEM;
> >> +
> >> + dev_set_drvdata(dev, adv_ec_data);
> >> + adv_ec_data->dev = dev;
> >> +
> >> + ret = adv_ec_init_ec_data(adv_ec_data);
> >> + if (ret)
> >> + goto err_init_data;
> >> +
> >> + ret = adv_ec_parse_prop(adv_ec_data);
> >> + if (ret)
> >> + goto err_prop;
> >> +
> >> + /* check whether this EC has the following subdevices. */
> >> + for (i = 0; i < ARRAY_SIZE(adv_ec_sub_cells); i++) {
> >> + if (adv_ec_data->sub_dev_mask & BIT(i)) {
> >> + ret = mfd_add_hotplug_devices(dev, &adv_ec_sub_cells[i], 1);
> >
> >Why have you chosen to use hotplug here?
> >
> >> + dev_info(adv_ec_data->dev, "mfd_add_hotplug_devices[%d]
> >%s\n", i,
> >> + adv_ec_sub_cells[i].name);
> >> + if (ret)
> >> + dev_err(dev, "failed to add %s subdevice: %d\n",
> >> + adv_ec_sub_cells[i].name, ret);
> >> + }
> >> + }
> >
> >This is a mess!
> >
> >Where are you pulling these devices from?
> >
> >> + dev_info(adv_ec_data->dev, "Advantech EC probe done");
> >> +
> >> + return 0;
> >> +
> >> +err_prop:
> >> + dev_err(dev, "failed to probe\n");
> >> +
> >> +err_init_data:
> >> + mutex_destroy(&adv_ec_data->lock);
> >> +
> >> + dev_err(dev, "failed to init data\n");
> >
> >You don't need 2 error messages in the error path.
> >
> >> + return ret;
> >> +}
> >> +
> >> +static int adv_ec_remove(struct platform_device *pdev)
> >> +{
> >> + struct adv_ec_platform_data *adv_ec_data;
> >> +
> >> + adv_ec_data = dev_get_drvdata(&pdev->dev);
> >> +
> >> + mutex_destroy(&adv_ec_data->lock);
> >> +
> >> + mfd_remove_devices(&pdev->dev);
> >
> >If you don't use the hotplug variant, you can use devm_* and omit
> >this.
> >
> >> + return 0;
> >> +}
> >> +
> >> +static const struct of_device_id adv_ec_of_match[] __maybe_unused = {
> >> + {
> >> + .compatible = "advantech,ahc1ec0",
> >> + },
> >
> >Put this on one line please.
> >
> >> + {}
> >> +};
> >> +MODULE_DEVICE_TABLE(of, adv_ec_of_match);
> >> +
> >> +static const struct acpi_device_id adv_ec_acpi_match[] __maybe_unused = {
> >> + {"AHC1EC0", 0},
> >
> >Spaces inside the '{' and '}' please.
> >
> >> + {},
> >
> >',' here, but not on the one above. Please be consistent.
> >
> >> +};
> >> +MODULE_DEVICE_TABLE(acpi, adv_ec_acpi_match);
> >> +
> >> +static struct platform_driver adv_ec_driver = {
> >> + .driver = {
> >> + .name = DRV_NAME,
> >> + .of_match_table = of_match_ptr(adv_ec_of_match),
> >> + .acpi_match_table = ACPI_PTR(adv_ec_acpi_match),
> >> + },
> >> + .probe = adv_ec_probe,
> >> + .remove = adv_ec_remove,
> >> +};
> >> +module_platform_driver(adv_ec_driver);
> >> +
> >> +MODULE_LICENSE("GPL");
> >> +MODULE_ALIAS("platform:" DRV_NAME);
> >> +MODULE_DESCRIPTION("Advantech Embedded Controller core driver.");
> >
> >Name as in the header.
> >
> >> +MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
> >> +MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@advantech.com.cn>");
> >> +MODULE_VERSION("1.0");
> >
> >Is this used?
> >
> >> diff --git a/include/linux/mfd/ahc1ec0.h b/include/linux/mfd/ahc1ec0.h
> >> new file mode 100644
> >> index 000000000000..1b01e10c1fef
> >> --- /dev/null
> >> +++ b/include/linux/mfd/ahc1ec0.h
> >> @@ -0,0 +1,276 @@
> >> +/* SPDX-License-Identifier: GPL-2.0-only */
> >> +#ifndef __LINUX_MFD_AHC1EC0_H
> >> +#define __LINUX_MFD_AHC1EC0_H
> >> +
> >> +#include <linux/device.h>
> >> +
> >> +#define EC_COMMAND_PORT 0x29A /* EC I/O command
> >port */
> >> +#define EC_STATUS_PORT 0x299 /* EC I/O data port */
> >> +
> >> +#define EC_RETRY_UDELAY 200 /* EC command retry delay
> >in microseconds */
> >> +#define EC_MAX_TIMEOUT_COUNT 5000 /* EC command max retry
> >count */
> >> +#define EC_COMMAND_BIT_OBF 0x01 /* Bit 0 is for OBF ready
> >(Output buffer full) */
> >> +#define EC_COMMAND_BIT_IBF 0x02 /* Bit 1 is for IBF ready
> >(Input buffer full) */
> >> +
> >> +/* Analog to digital converter command */
> >> +#define EC_AD_INDEX_WRITE 0x15 /* Write ADC port number into index
> >*/
> >> +#define EC_AD_LSB_READ 0x16 /* Read ADC LSB value from ADC port
> >*/
> >> +#define EC_AD_MSB_READ 0x1F /* Read ADC MSB value from ADC
> >port */
> >> +
> >> +/* Voltage device ID */
> >> +#define EC_DID_SMBOEM0 0x28 /* SMBUS/I2C. Smbus channel 0 */
> >> +#define EC_DID_CMOSBAT 0x50 /* CMOS coin battery voltage */
> >> +#define EC_DID_CMOSBAT_X2 0x51 /* CMOS coin battery voltage*2 */
> >> +#define EC_DID_CMOSBAT_X10 0x52 /* CMOS coin battery voltage*10 */
> >> +#define EC_DID_5VS0 0x56 /* 5VS0 voltage */
> >> +#define EC_DID_5VS0_X2 0x57 /* 5VS0 voltage*2 */
> >> +#define EC_DID_5VS0_X10 0x58 /* 5VS0 voltage*10 */
> >> +#define EC_DID_5VS5 0x59 /* 5VS5 voltage */
> >> +#define EC_DID_5VS5_X2 0x5A /* 5VS5 voltage*2 */
> >> +#define EC_DID_5VS5_X10 0x5B /* 5VS5 voltage*10 */
> >> +#define EC_DID_12VS0 0x62 /* 12VS0 voltage */
> >> +#define EC_DID_12VS0_X2 0x63 /* 12VS0 voltage*2 */
> >> +#define EC_DID_12VS0_X10 0x64 /* 12VS0 voltage*10 */
> >> +#define EC_DID_VCOREA 0x65 /* CPU A core voltage */
> >> +#define EC_DID_VCOREA_X2 0x66 /* CPU A core voltage*2 */
> >> +#define EC_DID_VCOREA_X10 0x67 /* CPU A core voltage*10 */
> >> +#define EC_DID_VCOREB 0x68 /* CPU B core voltage */
> >> +#define EC_DID_VCOREB_X2 0x69 /* CPU B core voltage*2 */
> >> +#define EC_DID_VCOREB_X10 0x6A /* CPU B core voltage*10 */
> >> +#define EC_DID_DC 0x6B /* ADC. onboard voltage */
> >> +#define EC_DID_DC_X2 0x6C /* ADC. onboard voltage*2 */
> >> +#define EC_DID_DC_X10 0x6D /* ADC. onboard voltage*10 */
> >> +
> >> +/* Current device ID */
> >> +#define EC_DID_CURRENT 0x74
> >> +
> >> +/* ACPI commands */
> >> +#define EC_ACPI_RAM_READ 0x80
> >> +#define EC_ACPI_RAM_WRITE 0x81
> >> +
> >> +/*
> >> + * Dynamic control table commands
> >> + * The table includes HW pin number, Device ID, and Pin polarity
> >> + */
> >> +#define EC_TBL_WRITE_ITEM 0x20
> >> +#define EC_TBL_GET_PIN 0x21
> >> +#define EC_TBL_GET_DEVID 0x22
> >> +#define EC_MAX_TBL_NUM 32
> >> +
> >> +/* LED Device ID table */
> >> +#define EC_DID_LED_RUN 0xE1
> >> +#define EC_DID_LED_ERR 0xE2
> >> +#define EC_DID_LED_SYS_RECOVERY 0xE3
> >> +#define EC_DID_LED_D105_G 0xE4
> >> +#define EC_DID_LED_D106_G 0xE5
> >> +#define EC_DID_LED_D107_G 0xE6
> >> +
> >> +/* LED control HW RAM address 0xA0-0xAF */
> >> +#define EC_HWRAM_LED_BASE_ADDR 0xA0
> >> +#define EC_HWRAM_LED_PIN(N) (EC_HWRAM_LED_BASE_ADDR
> >+ (4 * (N))) // N:0-3
> >> +#define EC_HWRAM_LED_CTRL_HIBYTE(N) (EC_HWRAM_LED_BASE_ADDR +
> >(4 * (N)) + 1)
> >> +#define EC_HWRAM_LED_CTRL_LOBYTE(N) (EC_HWRAM_LED_BASE_ADDR
> >+ (4 * (N)) + 2)
> >> +#define EC_HWRAM_LED_DEVICE_ID(N) (EC_HWRAM_LED_BASE_ADDR
> >+ (4 * (N)) + 3)
> >> +
> >> +/* LED control bit */
> >> +#define LED_CTRL_ENABLE_BIT() BIT(4)
> >> +#define LED_CTRL_INTCTL_BIT() BIT(5)
> >> +#define LED_CTRL_LEDBIT_MASK (0x03FF << 6)
> >> +#define LED_CTRL_POLARITY_MASK (0x000F << 0)
> >> +#define LED_CTRL_INTCTL_EXTERNAL 0
> >> +#define LED_CTRL_INTCTL_INTERNAL 1
> >> +
> >> +#define LED_DISABLE 0x0
> >> +#define LED_ON 0x1
> >> +#define LED_FAST 0x3
> >> +#define LED_NORMAL 0x5
> >> +#define LED_SLOW 0x7
> >> +#define LED_MANUAL 0xF
> >> +
> >> +#define LED_CTRL_LEDBIT_DISABLE 0x0000
> >> +#define LED_CTRL_LEDBIT_ON 0x03FF
> >> +#define LED_CTRL_LEDBIT_FAST 0x02AA
> >> +#define LED_CTRL_LEDBIT_NORMAL 0x0333
> >> +#define LED_CTRL_LEDBIT_SLOW 0x03E0
> >> +
> >> +/* Get the device name */
> >> +#define AMI_ADVANTECH_BOARD_ID_LENGTH 32
> >> +
> >> +/*
> >> + * Advantech Embedded Controller watchdog commands
> >> + * EC can send multi-stage watchdog event. System can setup watchdog
> >event
> >> + * independently to make up event sequence.
> >> + */
> >> +#define EC_COMMANS_PORT_IBF_MASK 0x02
> >> +#define EC_RESET_EVENT 0x04
> >> +#define EC_WDT_START 0x28
> >> +#define EC_WDT_STOP 0x29
> >> +#define EC_WDT_RESET 0x2A
> >> +#define EC_WDT_BOOTTMEWDT_STOP 0x2B
> >> +
> >> +#define EC_HW_RAM 0x89
> >> +
> >> +#define EC_EVENT_FLAG 0x57
> >> +#define EC_ENABLE_DELAY_H 0x58
> >> +#define EC_ENABLE_DELAY_L 0x59
> >> +#define EC_POWER_BTN_TIME_H 0x5A
> >> +#define EC_POWER_BTN_TIME_L 0x5B
> >> +#define EC_RESET_DELAY_TIME_H 0x5E
> >> +#define EC_RESET_DELAY_TIME_L 0x5F
> >> +#define EC_PIN_DELAY_TIME_H 0x60
> >> +#define EC_PIN_DELAY_TIME_L 0x61
> >> +#define EC_SCI_DELAY_TIME_H 0x62
> >> +#define EC_SCI_DELAY_TIME_L 0x63
> >> +
> >> +/* EC ACPI commands */
> >> +#define EC_ACPI_DATA_READ 0x80
> >> +#define EC_ACPI_DATA_WRITE 0x81
> >> +
> >> +/* Brightness ACPI Addr */
> >> +#define BRIGHTNESS_ACPI_ADDR 0x50
> >> +
> >> +/* EC HW RAM commands */
> >> +#define EC_HW_EXTEND_RAM_READ 0x86
> >> +#define EC_HW_EXTEND_RAM_WRITE 0x87
> >> +#define EC_HW_RAM_READ 0x88
> >> +#define EC_HW_RAM_WRITE 0x89
> >> +
> >> +/* EC Smbus commands */
> >> +#define EC_SMBUS_CHANNEL_SET 0x8A /* Set selector number
> >(SMBUS channel) */
> >> +#define EC_SMBUS_ENABLE_I2C 0x8C /* Enable channel
> >I2C */
> >> +#define EC_SMBUS_DISABLE_I2C 0x8D /* Disable channel I2C
> >*/
> >> +
> >> +/* Smbus transmit protocol */
> >> +#define EC_SMBUS_PROTOCOL 0x00
> >> +
> >> +/* SMBUS status */
> >> +#define EC_SMBUS_STATUS 0x01
> >> +
> >> +/* SMBUS device slave address (bit0 must be 0) */
> >> +#define EC_SMBUS_SLV_ADDR 0x02
> >> +
> >> +/* SMBUS device command */
> >> +#define EC_SMBUS_CMD 0x03
> >> +
> >> +/* 0x04-0x24 Data In read process, return data are stored in this address */
> >> +#define EC_SMBUS_DATA 0x04
> >> +
> >> +#define EC_SMBUS_DAT_OFFSET(n) (EC_SMBUS_DATA + (n))
> >> +
> >> +/* SMBUS channel selector (0-4) */
> >> +#define EC_SMBUS_CHANNEL 0x2B
> >> +
> >> +/* EC SMBUS transmit Protocol code */
> >> +#define SMBUS_QUICK_WRITE 0x02 /* Write Quick Command */
> >> +#define SMBUS_QUICK_READ 0x03 /* Read Quick Command */
> >> +#define SMBUS_BYTE_SEND 0x04 /* Send Byte */
> >> +#define SMBUS_BYTE_RECEIVE 0x05 /* Receive Byte */
> >> +#define SMBUS_BYTE_WRITE 0x06 /* Write Byte */
> >> +#define SMBUS_BYTE_READ 0x07 /* Read Byte */
> >> +#define SMBUS_WORD_WRITE 0x08 /* Write Word */
> >> +#define SMBUS_WORD_READ 0x09 /* Read Word */
> >> +#define SMBUS_BLOCK_WRITE 0x0A /* Write Block */
> >> +#define SMBUS_BLOCK_READ 0x0B /* Read Block */
> >> +#define SMBUS_PROC_CALL 0x0C /* Process Call */
> >> +#define SMBUS_BLOCK_PROC_CALL 0x0D /* Write Block-Read Block
> >Process Call */
> >> +#define SMBUS_I2C_READ_WRITE 0x0E /* I2C block Read-Write */
> >> +#define SMBUS_I2C_WRITE_READ 0x0F /* I2C block Write-Read */
> >> +
> >> +/* GPIO control commands */
> >> +#define EC_GPIO_INDEX_WRITE 0x10
> >> +#define EC_GPIO_STATUS_READ 0x11
> >> +#define EC_GPIO_STATUS_WRITE 0x12
> >> +#define EC_GPIO_DIR_READ 0x1D
> >> +#define EC_GPIO_DIR_WRITE 0x1E
> >> +
> >> +/* One Key Recovery commands */
> >> +#define EC_ONE_KEY_FLAG 0x9C
> >> +
> >> +/* ASG OEM commands */
> >> +#define EC_ASG_OEM 0xEA
> >> +#define EC_ASG_OEM_READ 0x00
> >> +#define EC_ASG_OEM_WRITE 0x01
> >> +#define EC_OEM_POWER_STATUS_VIN1 0X10
> >> +#define EC_OEM_POWER_STATUS_VIN2 0X11
> >> +#define EC_OEM_POWER_STATUS_BAT1 0X12
> >> +#define EC_OEM_POWER_STATUS_BAT2 0X13
> >> +
> >> +/* GPIO DEVICE ID */
> >> +#define EC_DID_ALTGPIO_0 0x10 /* 0x10 AltGpio0 User
> >define gpio */
> >> +#define EC_DID_ALTGPIO_1 0x11 /* 0x11 AltGpio1 User
> >define gpio */
> >> +#define EC_DID_ALTGPIO_2 0x12 /* 0x12 AltGpio2 User
> >define gpio */
> >> +#define EC_DID_ALTGPIO_3 0x13 /* 0x13 AltGpio3 User
> >define gpio */
> >> +#define EC_DID_ALTGPIO_4 0x14 /* 0x14 AltGpio4 User
> >define gpio */
> >> +#define EC_DID_ALTGPIO_5 0x15 /* 0x15 AltGpio5 User
> >define gpio */
> >> +#define EC_DID_ALTGPIO_6 0x16 /* 0x16 AltGpio6 User
> >define gpio */
> >> +#define EC_DID_ALTGPIO_7 0x17 /* 0x17 AltGpio7 User
> >define gpio */
> >> +
> >> +/* Lmsensor Chip Register */
> >> +#define NSLM96163_CHANNEL 0x02
> >> +
> >> +/* NS_LM96163 address 0x98 */
> >> +#define NSLM96163_ADDR 0x98
> >> +
> >> +/* LM96163 index(0x00) Local Temperature (Signed MSB) */
> >> +#define NSLM96163_LOC_TEMP 0x00
> >> +
> >> +/* HWMON registers */
> >> +#define INA266_REG_VOLTAGE 0x02 /* 1.25mV */
> >> +#define INA266_REG_POWER 0x03 /* 25mW */
> >> +#define INA266_REG_CURRENT 0x04 /* 1mA */
> >> +
> >> +struct ec_hw_pin_table {
> >> + unsigned int vbat[2];
> >> + unsigned int v5[2];
> >> + unsigned int v12[2];
> >> + unsigned int vcore[2];
> >> + unsigned int vdc[2];
> >> + unsigned int ec_current[2];
> >> + unsigned int power[2];
> >> +};
> >> +
> >> +struct ec_dynamic_table {
> >> + unsigned char device_id;
> >> + unsigned char hw_pin_num;
> >> +};
> >> +
> >> +struct ec_smbuso_em0 {
> >> + unsigned char hw_pin_num;
> >> +};
> >> +
> >> +struct pled_hw_pin_tbl {
> >> + unsigned int pled[6];
> >> +};
> >> +
> >> +struct adv_ec_platform_data {
> >> + char *bios_product_name;
> >
> >Where is this used?
> >
> >> + int sub_dev_nb;
> >> + u32 sub_dev_mask;
> >> + struct mutex lock;
> >> + struct device *dev;
> >> + struct class *adv_ec_class;
> >> +
> >> + struct ec_dynamic_table *dym_tbl;
> >> +};
> >
> >Check whether all of these really need to be in device data i.e. check
> >that they are all used in sub-devices.
> >
> >> +int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned
> >char hwpin,
> >> + unsigned char multi);
> >> +int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned
> >char addr,
> >> + unsigned char *pvalue);
> >> +int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned
> >char addr,
> >> + unsigned char value);
> >> +int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char
> >addr,
> >> + unsigned char *data);
> >> +int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char
> >addr,
> >> + unsigned char data);
> >> +int write_hwram_command(struct adv_ec_platform_data *adv_ec_data,
> >unsigned char data);
> >> +int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned
> >char PinNumber,
> >> + unsigned char *pvalue);
> >> +int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned
> >char PinNumber,
> >> + unsigned char value);
> >> +int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char
> >PinNumber,
> >> + unsigned char *pvalue);
> >> +int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned
> >char PinNumber,
> >> + unsigned char value);
> >> +
> >> +#endif /* __LINUX_MFD_AHC1EC0_H */
> >
> >--
> >Lee Jones [李琼斯]
> >Senior Technical Lead - Developer Services
> >Linaro.org │ Open source software for Arm SoCs
> >Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller
2021-03-09 16:07 ` Lee Jones
[not found] ` <22025d6fb74e49a1835f89cfa0849990@Taipei11.ADVANTECH.CORP>
@ 2021-03-19 10:01 ` Campion Kang
2021-03-19 14:14 ` Lee Jones
1 sibling, 1 reply; 20+ messages in thread
From: Campion Kang @ 2021-03-19 10:01 UTC (permalink / raw)
To: lee.jones
Cc: campion.kang, chia-lin.kao, devicetree, jdelvare, linux-hwmon,
linux-kernel, linux-watchdog, linux, robh+dt, wim, Campion.Kang
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset="y", Size: 38750 bytes --]
Please check [Campion] text in below as my reply.
Sorry, due to the mail was rejected by vger.kernel.org as SPAM before
so I reply the mail late and had some test email before.
-----------------------------------------------------------------------------------------
Date: Tue, 9 Mar 2021 16:07:55 +0000
From: Lee Jones <lee.jones@linaro.org>
On Mon, 18 Jan 2021, Campion Kang wrote:
> AHC1EC0 is the embedded controller driver for Advantech industrial
It would be nice to have the model number in the subject line.
[Campion] AHC1EC0 is its model name that used in Advantech device internal.
There is no external module name.
Drop "driver".
[Campion] OK
> products. This provides sub-devices such as hwmon and watchdog, and
> also
"HWMON and Watchdog"
> expose functions for sub-devices to read/write the value to embedded
"exposes"
> controller.
>
> Changed since V5:
> - Kconfig: add "AHC1EC0" string to clearly define the EC name
> - fix the code according to reviewer's suggestion
> - remove unnecessary header files
> - change the structure name to lower case, align with others
> naming
>
> Signed-off-by: Campion Kang <campion.kang@advantech.com.tw>
> ---
> drivers/mfd/Kconfig | 10 +
> drivers/mfd/Makefile | 2 +
> drivers/mfd/ahc1ec0.c | 808 ++++++++++++++++++++++++++++++++++++
> include/linux/mfd/ahc1ec0.h | 276 ++++++++++++
> 4 files changed, 1096 insertions(+)
> create mode 100644 drivers/mfd/ahc1ec0.c
> create mode 100644 include/linux/mfd/ahc1ec0.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index bdfce7b15621..7d5fb5c17d9a 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -2154,5 +2154,15 @@ config MFD_INTEL_M10_BMC
> additional drivers must be enabled in order to use the functionality
> of the device.
>
> +config MFD_AHC1EC0
> + tristate "Advantech AHC1EC0 Embedded Controller Module"
Please remove "Module"
> + depends on X86
> + select MFD_CORE
> + help
> + This is the core function that for Advantech EC drivers. It
> + includes the sub-devices such as hwmon, watchdog, etc. And also
> + provides expose functions for sub-devices to read/write the value
> + to embedded controller.
"This provides core functionality for the Advantech AHC1EC0 Embedded
Controller (EC) along with registration for HWMON and Watchdog
sub-devices. It also provides read and write APIs for communication
with the EC."
[Campion] OK, thanks.
> endmenu
> endif
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 14fdb188af02..a6af9d8825f4 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -268,3 +268,5 @@ obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
> obj-$(CONFIG_SGI_MFD_IOC3) += ioc3.o
> obj-$(CONFIG_MFD_SIMPLE_MFD_I2C) += simple-mfd-i2c.o
> obj-$(CONFIG_MFD_INTEL_M10_BMC) += intel-m10-bmc.o
> +
You don't need to space this out.
> +obj-$(CONFIG_MFD_AHC1EC0) += ahc1ec0.o
> diff --git a/drivers/mfd/ahc1ec0.c b/drivers/mfd/ahc1ec0.c
> new file mode 100644
> index 000000000000..015f4307a54e
> --- /dev/null
> +++ b/drivers/mfd/ahc1ec0.c
> @@ -0,0 +1,808 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Advantech embedded controller core driver AHC1EC0
Advantech AHC1EC0 Embedded Controller
> + * Copyright 2020 Advantech IIoT Group
This is out of date.
> + *
Drop this '\n' please.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/delay.h>
> +#include <linux/dmi.h>
> +#include <linux/errno.h>
> +#include <linux/mfd/ahc1ec0.h>
> +#include <linux/mfd/core.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +
> +#define DRV_NAME "ahc1ec0"
Please don't do this. Just use the string in-place.
> +enum {
> + ADVEC_SUBDEV_BRIGHTNESS = 0,
> + ADVEC_SUBDEV_EEPROM,
> + ADVEC_SUBDEV_GPIO,
> + ADVEC_SUBDEV_HWMON,
> + ADVEC_SUBDEV_LED,
> + ADVEC_SUBDEV_WDT,
> + ADVEC_SUBDEV_MAX,
> +};
Are these arbitrary?
[Campion] cannot arbitrary there, due to it is a index to identify its number of sub device.
> +/* Wait IBF (Input Buffer Full) clear */
> +static int ec_wait_write(void)
> +{
> + int i;
> +
> + for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
> + if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_IBF) == 0)
> + return 0;
> +
> + udelay(EC_RETRY_UDELAY);
> + }
> +
> + return -ETIMEDOUT;
> +}
>
> +/* Wait OBF (Output Buffer Full) data ready */
> +static int ec_wait_read(void)
> +{
> + int i;
> +
> + for (i = 0; i < EC_MAX_TIMEOUT_COUNT; i++) {
> + if ((inb(EC_COMMAND_PORT) & EC_COMMAND_BIT_OBF) != 0)
> + return 0;
> +
> + udelay(EC_RETRY_UDELAY);
> + }
> +
> + return -ETIMEDOUT;
> +}
> +
> +/* Read data from EC HW RAM, the process is the following:
> + * Step 0. Wait IBF clear to send command
> + * Step 1. Send read command to EC command port
> + * Step 2. Wait IBF clear that means command is got by EC
> + * Step 3. Send read address to EC data port
> + * Step 4. Wait OBF data ready
> + * Step 5. Get data from EC data port
> + */
> +int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char *data)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_HW_RAM_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + *data = inb(EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> +
> + return ret;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
EXPORT?
[Campion] Yes, thanks.
> +/* Write data to EC HW RAM
> + * Step 0. Wait IBF clear to send command
> + * Step 1. Send write command to EC command port
> + * Step 2. Wait IBF clear that means command is got by EC
> + * Step 3. Send write address to EC data port
> + * Step 4. Wait IBF clear that means command is got by EC
> + * Step 5. Send data to EC data port
> + */
> +int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr, unsigned char data)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_HW_RAM_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(data, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> +
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(write_hw_ram);
If you're going to export these, they should be in their own
namespace.
[Campion] Yes, i will rename it to ahc1ec_write_hw_ram().
> +/* Get dynamic control table */
> +static int adv_get_dynamic_tab(struct adv_ec_platform_data *adv_ec_data)
> +{
> + int i, ret;
> + unsigned char pin_tmp, device_id;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + for (i = 0; i < EC_MAX_TBL_NUM; i++) {
> + adv_ec_data->dym_tbl[i].device_id = 0xff;
> + adv_ec_data->dym_tbl[i].hw_pin_num = 0xff;
> + }
> +
> + for (i = 0; i < EC_MAX_TBL_NUM; i++) {
> + ret = ec_wait_write();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
> + __LINE__);
Please remove all of this debug code.
[Campion] OK.
> + goto error;
> + }
> + outb(EC_TBL_WRITE_ITEM, EC_COMMAND_PORT);
More basic commentary is required throughout I think.
[Campion] OK.
> + ret = ec_wait_write();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + outb(i, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> +
> + /*
> + * If item is defined, EC will return item number.
> + * If table item is not defined, EC will return 0xFF.
> + */
> + pin_tmp = inb(EC_STATUS_PORT);
> + if (pin_tmp == 0xff) {
Please define all magic numbers.
[Campion] OK
> + dev_dbg(adv_ec_data->dev, "%s: inb(EC_STATUS_PORT)=0x%02x != 0xff.\n",
> + __func__, pin_tmp);
> + goto pass;
> + }
> +
> + ret = ec_wait_write();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_write. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + outb(EC_TBL_GET_PIN, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + pin_tmp = inb(EC_STATUS_PORT) & 0xff;
> + if (pin_tmp == 0xff) {
> + dev_dbg(adv_ec_data->dev, "%s: pin_tmp(0x%02X). line: %d\n", __func__,
> + pin_tmp, __LINE__);
> + goto pass;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_TBL_GET_DEVID, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret) {
> + dev_dbg(adv_ec_data->dev, "%s: ec_wait_read. line: %d\n", __func__,
> + __LINE__);
> + goto error;
> + }
> + device_id = inb(EC_STATUS_PORT) & 0xff;
> +
> + dev_dbg(adv_ec_data->dev, "%s: device_id=0x%02X. line: %d\n", __func__,
> + device_id, __LINE__);
> +
> + adv_ec_data->dym_tbl[i].device_id = device_id;
> + adv_ec_data->dym_tbl[i].hw_pin_num = pin_tmp;
> + }
> +
> +pass:
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n",
> + __func__, __LINE__);
Remove all _func_ and _LINE_ info. It's seldom helpful.
[Campion] OK.
> + return ret;
> +}
> +
> +int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
What is 'ad'?
[Campion] it is for ADC. I will rename it to 'adc' that more clear.
> + unsigned char multi)
> +{
> + int ret;
> + u32 ret_val;
> + unsigned int LSB, MSB;
> +
> + mutex_lock(&adv_ec_data->lock);
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_AD_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(hwpin, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_AD_LSB_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + LSB = inb(EC_STATUS_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_AD_MSB_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + MSB = inb(EC_STATUS_PORT);
> + ret_val = ((MSB << 8) | LSB) & 0x03FF;
> + ret_val = ret_val * multi * 100;
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return ret_val;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
dev_err()
[Campion] OK.
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(read_ad_value);
> +
> +int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char *pvalue)
> +{
> + int ret;
> + unsigned char value;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_ACPI_RAM_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + value = inb(EC_STATUS_PORT);
> + *pvalue = value;
> +
> + mutex_unlock(&adv_ec_data->lock);
> +
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(read_acpi_value);
Namespace.
[Campion] OK, rename to 'ahc1ec_read_acpi_value'
> +int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char value)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_ACPI_DATA_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(addr, EC_STATUS_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(value, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
EXPORT?
I think this API (i.e. all of the functions above) should be moved
into drivers/platform. They really don't have a place in MFD.
[Campion] this is a common function for upper HWMON and brightness control used.
So far this API only used by HWMON, but then it will be used by
brightness in next stage. So i put this API here, OK?
> +int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue)
> +{
> + int ret;
> +
> + unsigned char gpio_status_value;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
> + mutex_unlock(&adv_ec_data->lock);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_STATUS_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + gpio_status_value = inb(EC_STATUS_PORT);
> +
> + *pvalue = gpio_status_value;
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> + return ret;
> +}
> +
> +int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!!\n", __func__);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_STATUS_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(value, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +
> +int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue)
> +{
> + int ret;
> + unsigned char gpio_dir_value;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + dev_err(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
> + __LINE__);
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_DIR_READ, EC_COMMAND_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> + gpio_dir_value = inb(EC_STATUS_PORT);
> + *pvalue = gpio_dir_value;
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +
> +int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_INDEX_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(PinNumber, EC_STATUS_PORT);
> +
> + ret = ec_wait_read();
> + if (ret)
> + goto error;
> +
> + if (inb(EC_STATUS_PORT) == 0xff) {
> + mutex_unlock(&adv_ec_data->lock);
> + dev_warn(adv_ec_data->dev, "%s: Read Pin Number error!! line: %d\n", __func__,
> + __LINE__);
> +
> + return -1;
> + }
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(EC_GPIO_DIR_WRITE, EC_COMMAND_PORT);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(value, EC_STATUS_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
All of the GPIO functions above should move into drivers/gpio.
[Campion] Due to it has a flow need to cowork with EC chip and firmware, it cannot be interrupt
by other functions. So it needs to keep in here.
> +int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data)
> +{
> + int ret;
> +
> + mutex_lock(&adv_ec_data->lock);
> +
> + ret = ec_wait_write();
> + if (ret)
> + goto error;
> + outb(data, EC_COMMAND_PORT);
> +
> + mutex_unlock(&adv_ec_data->lock);
> + return 0;
> +
> +error:
> + mutex_unlock(&adv_ec_data->lock);
> +
> + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> + __LINE__);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL_GPL(write_hwram_command);
> +
> +static int adv_ec_get_productname(struct adv_ec_platform_data *adv_ec_data, char *product)
> +{
> + const char *vendor, *device;
> + int length = 0;
> +
> + /* Check it is Advantech board */
> + vendor = dmi_get_system_info(DMI_SYS_VENDOR);
> + if (memcmp(vendor, "Advantech", sizeof("Advantech")) != 0)
> + return -ENODEV;
> +
> + /* Get product model name */
> + device = dmi_get_system_info(DMI_PRODUCT_NAME);
> + if (device) {
> + while ((device[length] != ' ')
> + && (length < AMI_ADVANTECH_BOARD_ID_LENGTH))
> + length++;
> + memset(product, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
> + memmove(product, device, length);
> +
> + dev_info(adv_ec_data->dev, "BIOS Product Name = %s\n", product);
> +
> + return 0;
> + }
> +
> + dev_warn(adv_ec_data->dev, "This device is not Advantech Board (%s)!\n", product);
> +
> + return -ENODEV;
> +}
These should go into drivers/platform.
[Campion] This is a simple function to get module name from BIOS DMI table, it is not need to
access EC chip. But it can get once and other drivers can get this information,
donot call DMI every time. Can it keep in here?
> +static const struct mfd_cell adv_ec_sub_cells[] = {
> + { .name = "adv-ec-brightness", },
> + { .name = "adv-ec-eeprom", },
> + { .name = "adv-ec-gpio", },
> + { .name = "ahc1ec0-hwmon", },
> + { .name = "adv-ec-led", },
> + { .name = "ahc1ec0-wdt", },
> +};
> +
> +static int adv_ec_init_ec_data(struct adv_ec_platform_data *adv_ec_data)
> +{
> + int ret;
> +
> + adv_ec_data->sub_dev_mask = 0;
> + adv_ec_data->sub_dev_nb = 0;
> + adv_ec_data->dym_tbl = NULL;
> + adv_ec_data->bios_product_name = NULL;
Why are pre-initialising these?
[Campion] Just make sure they have empty pointer, but I will remove it.
> + mutex_init(&adv_ec_data->lock);
> +
> + /* Get product name */
> + adv_ec_data->bios_product_name =
> + devm_kzalloc(adv_ec_data->dev, AMI_ADVANTECH_BOARD_ID_LENGTH, GFP_KERNEL);
> + if (!adv_ec_data->bios_product_name)
> + return -ENOMEM;
> +
> + memset(adv_ec_data->bios_product_name, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
Why are you doing this?
[Campion] Just make sure the memory is null all
> + ret = adv_ec_get_productname(adv_ec_data, adv_ec_data->bios_product_name);
> + if (ret)
> + return ret;
> +
> + /* Get pin table */
> + adv_ec_data->dym_tbl = devm_kzalloc(adv_ec_data->dev,
> + EC_MAX_TBL_NUM * sizeof(struct ec_dynamic_table),
> + GFP_KERNEL);
> + if (!adv_ec_data->dym_tbl)
> + return -ENOMEM;
What does a dynamic table do?
[Campion] The dynamic table is reterived from EC firmware according to different platform HW device.
it will based on dynamic table information to get HW pin definition based on its function.
The pin value will retrive to calcute the value, for example, voltage value, vcore value.
> + ret = adv_get_dynamic_tab(adv_ec_data);
return adv_get_dynamic_tab();
[Campion] OK
> + return ret;
> +}
> +
> +static int adv_ec_parse_prop(struct adv_ec_platform_data *adv_ec_data)
> +{
> + int i, ret;
> + u32 nb, sub_dev[ADVEC_SUBDEV_MAX];
> +
> + ret = device_property_read_u32(adv_ec_data->dev, "advantech,sub-dev-nb", &nb);
Indexing devices is generally not a good strategy.
---------------------------------------------------------------------------
[Campion] Yes, I will remove it, just use the following that defined in ahc1ec0.yaml.
I ever feedback related mail for "https://lore.kernel.org/linux-watchdog/20210118123749.4769-6-campion.kang@advantech.com.tw/t/#m5126adbc2453e3ab3e6bda717c257fab364b9f45".
But vger.kernel.org returned the mail to mail as spam mail.
I will modity it as the following, is it OK?
examples:
- |
#include <dt-bindings/mfd/ahc1ec0-dt.h>
ahc1ec0 {
compatible = "advantech,ahc1ec0";
advantech,hwmon-profile = <AHC1EC0_HWMON_PRO_UNO2271G>;
advantech,watchdog = true;
};
----------------------------------------------------------------------------
> + if (ret < 0) {
> + dev_err(adv_ec_data->dev, "get sub-dev-nb failed! (%d)\n", ret);
> + return ret;
> + }
> + adv_ec_data->sub_dev_nb = nb;
'nb' is not a good choice for a variable name.
[Campion] I will remove it.
> + ret = device_property_read_u32_array(adv_ec_data->dev, "advantech,sub-dev",
> + sub_dev, nb);
> + if (ret < 0) {
Is '> 0' valid?
[Campion] It will be remove it.
> + dev_err(adv_ec_data->dev, "get sub-dev failed! (%d)\n", ret);
Please use proper error messages.
"Failed to read 'advantech,sub-dev' property"
[Campion] It will be removed according the above changed.
> + return ret;
> + }
> +
> + for (i = 0; i < nb; i++) {
> + switch (sub_dev[i]) {
> + case ADVEC_SUBDEV_BRIGHTNESS:
> + case ADVEC_SUBDEV_EEPROM:
> + case ADVEC_SUBDEV_GPIO:
> + case ADVEC_SUBDEV_HWMON:
> + case ADVEC_SUBDEV_LED:
> + case ADVEC_SUBDEV_WDT:
> + adv_ec_data->sub_dev_mask |= BIT(sub_dev[i]);
> + break;
> + default:
> + dev_err(adv_ec_data->dev, "invalid prop value(%d)!\n",
> + sub_dev[i]);
> + }
> + }
> + dev_info(adv_ec_data->dev, "sub-dev mask = 0x%x\n", adv_ec_data->sub_dev_mask);
> +
> + return 0;
> +}
> +
> +static int adv_ec_probe(struct platform_device *pdev)
> +{
> + int ret, i;
> + struct device *dev = &pdev->dev;
> + struct adv_ec_platform_data *adv_ec_data;
This is not platform data. This is driver data.
struct adv_ec_ddata *ddata;
[Campion] OK, I modified it.
> + adv_ec_data = devm_kzalloc(dev, sizeof(struct adv_ec_platform_data), GFP_KERNEL);
sizeof(*adv_ec_data)
[Campion] OK, also update ahc1ec0-wdt.c and ahc1ec0-hwmon.c.
> + if (!adv_ec_data)
> + return -ENOMEM;
> +
> + dev_set_drvdata(dev, adv_ec_data);
> + adv_ec_data->dev = dev;
> +
> + ret = adv_ec_init_ec_data(adv_ec_data);
> + if (ret)
> + goto err_init_data;
> +
> + ret = adv_ec_parse_prop(adv_ec_data);
> + if (ret)
> + goto err_prop;
> +
> + /* check whether this EC has the following subdevices. */
> + for (i = 0; i < ARRAY_SIZE(adv_ec_sub_cells); i++) {
> + if (adv_ec_data->sub_dev_mask & BIT(i)) {
> + ret = mfd_add_hotplug_devices(dev, &adv_ec_sub_cells[i], 1);
Why have you chosen to use hotplug here?
[Campion] There is a information in BIOS ACPI table according to different device to decide
which function drivers need to be probe. May be a device has HWMON, it will dynamic
to load HWMON driver, but other device may not.
> + dev_info(adv_ec_data->dev, "mfd_add_hotplug_devices[%d] %s\n", i,
> + adv_ec_sub_cells[i].name);
> + if (ret)
> + dev_err(dev, "failed to add %s subdevice: %d\n",
> + adv_ec_sub_cells[i].name, ret);
> + }
> + }
This is a mess!
Where are you pulling these devices from?
[Campion] decide which drivers need to mount from BIOS ACPI table. This drive would built in Linux Kernel.
I am not sure what's your meaning, can you describe more? Thank you
> + dev_info(adv_ec_data->dev, "Advantech EC probe done");
> +
> + return 0;
> +
> +err_prop:
> + dev_err(dev, "failed to probe\n");
> +
> +err_init_data:
> + mutex_destroy(&adv_ec_data->lock);
> +
> + dev_err(dev, "failed to init data\n");
You don't need 2 error messages in the error path.
[Campion] OK, remove one.
> + return ret;
> +}
> +
> +static int adv_ec_remove(struct platform_device *pdev)
> +{
> + struct adv_ec_platform_data *adv_ec_data;
> +
> + adv_ec_data = dev_get_drvdata(&pdev->dev);
> +
> + mutex_destroy(&adv_ec_data->lock);
> +
> + mfd_remove_devices(&pdev->dev);
If you don't use the hotplug variant, you can use devm_* and omit
this.
[Campion] got it.
> + return 0;
> +}
> +
> +static const struct of_device_id adv_ec_of_match[] __maybe_unused = {
> + {
> + .compatible = "advantech,ahc1ec0",
> + },
Put this on one line please.
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, adv_ec_of_match);
> +
> +static const struct acpi_device_id adv_ec_acpi_match[] __maybe_unused = {
> + {"AHC1EC0", 0},
Spaces inside the '{' and '}' please.
> + {},
',' here, but not on the one above. Please be consistent.
> +};
> +MODULE_DEVICE_TABLE(acpi, adv_ec_acpi_match);
> +
> +static struct platform_driver adv_ec_driver = {
> + .driver = {
> + .name = DRV_NAME,
> + .of_match_table = of_match_ptr(adv_ec_of_match),
> + .acpi_match_table = ACPI_PTR(adv_ec_acpi_match),
> + },
> + .probe = adv_ec_probe,
> + .remove = adv_ec_remove,
> +};
> +module_platform_driver(adv_ec_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:" DRV_NAME);
> +MODULE_DESCRIPTION("Advantech Embedded Controller core driver.");
Name as in the header.
> +MODULE_AUTHOR("Campion Kang <campion.kang@advantech.com.tw>");
> +MODULE_AUTHOR("Jianfeng Dai <jianfeng.dai@advantech.com.cn>");
> +MODULE_VERSION("1.0");
Is this used?
[Campion] Yes, it is used. AceLan whom is Canonical Kernel RD was test this drivers for Advantech UNO device on Ubuntu Kernel.
> diff --git a/include/linux/mfd/ahc1ec0.h b/include/linux/mfd/ahc1ec0.h
> new file mode 100644
> index 000000000000..1b01e10c1fef
> --- /dev/null
> +++ b/include/linux/mfd/ahc1ec0.h
> @@ -0,0 +1,276 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +#ifndef __LINUX_MFD_AHC1EC0_H
> +#define __LINUX_MFD_AHC1EC0_H
> +
> +#include <linux/device.h>
> +
> +#define EC_COMMAND_PORT 0x29A /* EC I/O command port */
> +#define EC_STATUS_PORT 0x299 /* EC I/O data port */
> +
> +#define EC_RETRY_UDELAY 200 /* EC command retry delay in microseconds */
> +#define EC_MAX_TIMEOUT_COUNT 5000 /* EC command max retry count */
> +#define EC_COMMAND_BIT_OBF 0x01 /* Bit 0 is for OBF ready (Output buffer full) */
> +#define EC_COMMAND_BIT_IBF 0x02 /* Bit 1 is for IBF ready (Input buffer full) */
> +
> +/* Analog to digital converter command */
> +#define EC_AD_INDEX_WRITE 0x15 /* Write ADC port number into index */
> +#define EC_AD_LSB_READ 0x16 /* Read ADC LSB value from ADC port */
> +#define EC_AD_MSB_READ 0x1F /* Read ADC MSB value from ADC port */
> +
> +/* Voltage device ID */
> +#define EC_DID_SMBOEM0 0x28 /* SMBUS/I2C. Smbus channel 0 */
> +#define EC_DID_CMOSBAT 0x50 /* CMOS coin battery voltage */
> +#define EC_DID_CMOSBAT_X2 0x51 /* CMOS coin battery voltage*2 */
> +#define EC_DID_CMOSBAT_X10 0x52 /* CMOS coin battery voltage*10 */
> +#define EC_DID_5VS0 0x56 /* 5VS0 voltage */
> +#define EC_DID_5VS0_X2 0x57 /* 5VS0 voltage*2 */
> +#define EC_DID_5VS0_X10 0x58 /* 5VS0 voltage*10 */
> +#define EC_DID_5VS5 0x59 /* 5VS5 voltage */
> +#define EC_DID_5VS5_X2 0x5A /* 5VS5 voltage*2 */
> +#define EC_DID_5VS5_X10 0x5B /* 5VS5 voltage*10 */
> +#define EC_DID_12VS0 0x62 /* 12VS0 voltage */
> +#define EC_DID_12VS0_X2 0x63 /* 12VS0 voltage*2 */
> +#define EC_DID_12VS0_X10 0x64 /* 12VS0 voltage*10 */
> +#define EC_DID_VCOREA 0x65 /* CPU A core voltage */
> +#define EC_DID_VCOREA_X2 0x66 /* CPU A core voltage*2 */
> +#define EC_DID_VCOREA_X10 0x67 /* CPU A core voltage*10 */
> +#define EC_DID_VCOREB 0x68 /* CPU B core voltage */
> +#define EC_DID_VCOREB_X2 0x69 /* CPU B core voltage*2 */
> +#define EC_DID_VCOREB_X10 0x6A /* CPU B core voltage*10 */
> +#define EC_DID_DC 0x6B /* ADC. onboard voltage */
> +#define EC_DID_DC_X2 0x6C /* ADC. onboard voltage*2 */
> +#define EC_DID_DC_X10 0x6D /* ADC. onboard voltage*10 */
> +
> +/* Current device ID */
> +#define EC_DID_CURRENT 0x74
> +
> +/* ACPI commands */
> +#define EC_ACPI_RAM_READ 0x80
> +#define EC_ACPI_RAM_WRITE 0x81
> +
> +/*
> + * Dynamic control table commands
> + * The table includes HW pin number, Device ID, and Pin polarity
> + */
> +#define EC_TBL_WRITE_ITEM 0x20
> +#define EC_TBL_GET_PIN 0x21
> +#define EC_TBL_GET_DEVID 0x22
> +#define EC_MAX_TBL_NUM 32
> +
> +/* LED Device ID table */
> +#define EC_DID_LED_RUN 0xE1
> +#define EC_DID_LED_ERR 0xE2
> +#define EC_DID_LED_SYS_RECOVERY 0xE3
> +#define EC_DID_LED_D105_G 0xE4
> +#define EC_DID_LED_D106_G 0xE5
> +#define EC_DID_LED_D107_G 0xE6
> +
> +/* LED control HW RAM address 0xA0-0xAF */
> +#define EC_HWRAM_LED_BASE_ADDR 0xA0
> +#define EC_HWRAM_LED_PIN(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N))) // N:0-3
> +#define EC_HWRAM_LED_CTRL_HIBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 1)
> +#define EC_HWRAM_LED_CTRL_LOBYTE(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 2)
> +#define EC_HWRAM_LED_DEVICE_ID(N) (EC_HWRAM_LED_BASE_ADDR + (4 * (N)) + 3)
> +
> +/* LED control bit */
> +#define LED_CTRL_ENABLE_BIT() BIT(4)
> +#define LED_CTRL_INTCTL_BIT() BIT(5)
> +#define LED_CTRL_LEDBIT_MASK (0x03FF << 6)
> +#define LED_CTRL_POLARITY_MASK (0x000F << 0)
> +#define LED_CTRL_INTCTL_EXTERNAL 0
> +#define LED_CTRL_INTCTL_INTERNAL 1
> +
> +#define LED_DISABLE 0x0
> +#define LED_ON 0x1
> +#define LED_FAST 0x3
> +#define LED_NORMAL 0x5
> +#define LED_SLOW 0x7
> +#define LED_MANUAL 0xF
> +
> +#define LED_CTRL_LEDBIT_DISABLE 0x0000
> +#define LED_CTRL_LEDBIT_ON 0x03FF
> +#define LED_CTRL_LEDBIT_FAST 0x02AA
> +#define LED_CTRL_LEDBIT_NORMAL 0x0333
> +#define LED_CTRL_LEDBIT_SLOW 0x03E0
> +
> +/* Get the device name */
> +#define AMI_ADVANTECH_BOARD_ID_LENGTH 32
> +
> +/*
> + * Advantech Embedded Controller watchdog commands
> + * EC can send multi-stage watchdog event. System can setup watchdog event
> + * independently to make up event sequence.
> + */
> +#define EC_COMMANS_PORT_IBF_MASK 0x02
> +#define EC_RESET_EVENT 0x04
> +#define EC_WDT_START 0x28
> +#define EC_WDT_STOP 0x29
> +#define EC_WDT_RESET 0x2A
> +#define EC_WDT_BOOTTMEWDT_STOP 0x2B
> +
> +#define EC_HW_RAM 0x89
> +
> +#define EC_EVENT_FLAG 0x57
> +#define EC_ENABLE_DELAY_H 0x58
> +#define EC_ENABLE_DELAY_L 0x59
> +#define EC_POWER_BTN_TIME_H 0x5A
> +#define EC_POWER_BTN_TIME_L 0x5B
> +#define EC_RESET_DELAY_TIME_H 0x5E
> +#define EC_RESET_DELAY_TIME_L 0x5F
> +#define EC_PIN_DELAY_TIME_H 0x60
> +#define EC_PIN_DELAY_TIME_L 0x61
> +#define EC_SCI_DELAY_TIME_H 0x62
> +#define EC_SCI_DELAY_TIME_L 0x63
> +
> +/* EC ACPI commands */
> +#define EC_ACPI_DATA_READ 0x80
> +#define EC_ACPI_DATA_WRITE 0x81
> +
> +/* Brightness ACPI Addr */
> +#define BRIGHTNESS_ACPI_ADDR 0x50
> +
> +/* EC HW RAM commands */
> +#define EC_HW_EXTEND_RAM_READ 0x86
> +#define EC_HW_EXTEND_RAM_WRITE 0x87
> +#define EC_HW_RAM_READ 0x88
> +#define EC_HW_RAM_WRITE 0x89
> +
> +/* EC Smbus commands */
> +#define EC_SMBUS_CHANNEL_SET 0x8A /* Set selector number (SMBUS channel) */
> +#define EC_SMBUS_ENABLE_I2C 0x8C /* Enable channel I2C */
> +#define EC_SMBUS_DISABLE_I2C 0x8D /* Disable channel I2C */
> +
> +/* Smbus transmit protocol */
> +#define EC_SMBUS_PROTOCOL 0x00
> +
> +/* SMBUS status */
> +#define EC_SMBUS_STATUS 0x01
> +
> +/* SMBUS device slave address (bit0 must be 0) */
> +#define EC_SMBUS_SLV_ADDR 0x02
> +
> +/* SMBUS device command */
> +#define EC_SMBUS_CMD 0x03
> +
> +/* 0x04-0x24 Data In read process, return data are stored in this address */
> +#define EC_SMBUS_DATA 0x04
> +
> +#define EC_SMBUS_DAT_OFFSET(n) (EC_SMBUS_DATA + (n))
> +
> +/* SMBUS channel selector (0-4) */
> +#define EC_SMBUS_CHANNEL 0x2B
> +
> +/* EC SMBUS transmit Protocol code */
> +#define SMBUS_QUICK_WRITE 0x02 /* Write Quick Command */
> +#define SMBUS_QUICK_READ 0x03 /* Read Quick Command */
> +#define SMBUS_BYTE_SEND 0x04 /* Send Byte */
> +#define SMBUS_BYTE_RECEIVE 0x05 /* Receive Byte */
> +#define SMBUS_BYTE_WRITE 0x06 /* Write Byte */
> +#define SMBUS_BYTE_READ 0x07 /* Read Byte */
> +#define SMBUS_WORD_WRITE 0x08 /* Write Word */
> +#define SMBUS_WORD_READ 0x09 /* Read Word */
> +#define SMBUS_BLOCK_WRITE 0x0A /* Write Block */
> +#define SMBUS_BLOCK_READ 0x0B /* Read Block */
> +#define SMBUS_PROC_CALL 0x0C /* Process Call */
> +#define SMBUS_BLOCK_PROC_CALL 0x0D /* Write Block-Read Block Process Call */
> +#define SMBUS_I2C_READ_WRITE 0x0E /* I2C block Read-Write */
> +#define SMBUS_I2C_WRITE_READ 0x0F /* I2C block Write-Read */
> +
> +/* GPIO control commands */
> +#define EC_GPIO_INDEX_WRITE 0x10
> +#define EC_GPIO_STATUS_READ 0x11
> +#define EC_GPIO_STATUS_WRITE 0x12
> +#define EC_GPIO_DIR_READ 0x1D
> +#define EC_GPIO_DIR_WRITE 0x1E
> +
> +/* One Key Recovery commands */
> +#define EC_ONE_KEY_FLAG 0x9C
> +
> +/* ASG OEM commands */
> +#define EC_ASG_OEM 0xEA
> +#define EC_ASG_OEM_READ 0x00
> +#define EC_ASG_OEM_WRITE 0x01
> +#define EC_OEM_POWER_STATUS_VIN1 0X10
> +#define EC_OEM_POWER_STATUS_VIN2 0X11
> +#define EC_OEM_POWER_STATUS_BAT1 0X12
> +#define EC_OEM_POWER_STATUS_BAT2 0X13
> +
> +/* GPIO DEVICE ID */
> +#define EC_DID_ALTGPIO_0 0x10 /* 0x10 AltGpio0 User define gpio */
> +#define EC_DID_ALTGPIO_1 0x11 /* 0x11 AltGpio1 User define gpio */
> +#define EC_DID_ALTGPIO_2 0x12 /* 0x12 AltGpio2 User define gpio */
> +#define EC_DID_ALTGPIO_3 0x13 /* 0x13 AltGpio3 User define gpio */
> +#define EC_DID_ALTGPIO_4 0x14 /* 0x14 AltGpio4 User define gpio */
> +#define EC_DID_ALTGPIO_5 0x15 /* 0x15 AltGpio5 User define gpio */
> +#define EC_DID_ALTGPIO_6 0x16 /* 0x16 AltGpio6 User define gpio */
> +#define EC_DID_ALTGPIO_7 0x17 /* 0x17 AltGpio7 User define gpio */
> +
> +/* Lmsensor Chip Register */
> +#define NSLM96163_CHANNEL 0x02
> +
> +/* NS_LM96163 address 0x98 */
> +#define NSLM96163_ADDR 0x98
> +
> +/* LM96163 index(0x00) Local Temperature (Signed MSB) */
> +#define NSLM96163_LOC_TEMP 0x00
> +
> +/* HWMON registers */
> +#define INA266_REG_VOLTAGE 0x02 /* 1.25mV */
> +#define INA266_REG_POWER 0x03 /* 25mW */
> +#define INA266_REG_CURRENT 0x04 /* 1mA */
> +
> +struct ec_hw_pin_table {
> + unsigned int vbat[2];
> + unsigned int v5[2];
> + unsigned int v12[2];
> + unsigned int vcore[2];
> + unsigned int vdc[2];
> + unsigned int ec_current[2];
> + unsigned int power[2];
> +};
> +
> +struct ec_dynamic_table {
> + unsigned char device_id;
> + unsigned char hw_pin_num;
> +};
> +
> +struct ec_smbuso_em0 {
> + unsigned char hw_pin_num;
> +};
> +
> +struct pled_hw_pin_tbl {
> + unsigned int pled[6];
> +};
> +
> +struct adv_ec_platform_data {
> + char *bios_product_name;
Where is this used?
[Campion] Get the module name once and upper application can get it by EC driver.
> + int sub_dev_nb;
> + u32 sub_dev_mask;
> + struct mutex lock;
> + struct device *dev;
> + struct class *adv_ec_class;
> +
> + struct ec_dynamic_table *dym_tbl;
> +};
Check whether all of these really need to be in device data i.e. check
that they are all used in sub-devices.
[Campion] It seems donot use sub_dev_nb and sub_dev_mask in device data, i will remove it.
> +int read_ad_value(struct adv_ec_platform_data *adv_ec_data, unsigned char hwpin,
> + unsigned char multi);
> +int read_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char *pvalue);
> +int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char value);
> +int read_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char *data);
> +int write_hw_ram(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> + unsigned char data);
> +int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data);
> +int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue);
> +int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value);
> +int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char *pvalue);
> +int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> + unsigned char value);
> +
> +#endif /* __LINUX_MFD_AHC1EC0_H */
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller
2021-03-19 10:01 ` Campion Kang
@ 2021-03-19 14:14 ` Lee Jones
[not found] ` <f47a66c80d8b4cf6b9c28a4519a10521@Taipei11.ADVANTECH.CORP>
0 siblings, 1 reply; 20+ messages in thread
From: Lee Jones @ 2021-03-19 14:14 UTC (permalink / raw)
To: Campion Kang
Cc: chia-lin.kao, devicetree, jdelvare, linux-hwmon, linux-kernel,
linux-watchdog, linux, robh+dt, wim, Campion.Kang
On Fri, 19 Mar 2021, Campion Kang wrote:
>
> Please check [Campion] text in below as my reply.
This is a mess. Please setup your mailer to quote correctly.
> Sorry, due to the mail was rejected by vger.kernel.org as SPAM before
> so I reply the mail late and had some test email before.
>
> -----------------------------------------------------------------------------------------
> Date: Tue, 9 Mar 2021 16:07:55 +0000
> From: Lee Jones <lee.jones@linaro.org>
[...]
> > +enum {
> > + ADVEC_SUBDEV_BRIGHTNESS = 0,
> > + ADVEC_SUBDEV_EEPROM,
> > + ADVEC_SUBDEV_GPIO,
> > + ADVEC_SUBDEV_HWMON,
> > + ADVEC_SUBDEV_LED,
> > + ADVEC_SUBDEV_WDT,
> > + ADVEC_SUBDEV_MAX,
> > +};
>
> Are these arbitrary?
> [Campion] cannot arbitrary there, due to it is a index to identify its number of sub device.
I'm asking what this is dictated by.
Are these ID/index values written into H/W?
[...]
> > +int write_acpi_value(struct adv_ec_platform_data *adv_ec_data, unsigned char addr,
> > + unsigned char value)
> > +{
> > + int ret;
> > +
> > + mutex_lock(&adv_ec_data->lock);
> > +
> > + ret = ec_wait_write();
> > + if (ret)
> > + goto error;
> > + outb(EC_ACPI_DATA_WRITE, EC_COMMAND_PORT);
> > +
> > + ret = ec_wait_write();
> > + if (ret)
> > + goto error;
> > + outb(addr, EC_STATUS_PORT);
> > +
> > + ret = ec_wait_write();
> > + if (ret)
> > + goto error;
> > + outb(value, EC_STATUS_PORT);
> > +
> > + mutex_unlock(&adv_ec_data->lock);
> > + return 0;
> > +
> > +error:
> > + mutex_unlock(&adv_ec_data->lock);
> > +
> > + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> > + __LINE__);
> > +
> > + return ret;
> > +}
>
> EXPORT?
>
> I think this API (i.e. all of the functions above) should be moved
> into drivers/platform. They really don't have a place in MFD.
>
> [Campion] this is a common function for upper HWMON and brightness control used.
> So far this API only used by HWMON, but then it will be used by
> brightness in next stage. So i put this API here, OK?
I think it belongs in drivers/platform. Take a look at some of the
other Embedded Controller code that lives there.
> > +int read_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> > + unsigned char *pvalue)
> > +{
> > +}
> > +
> > +int write_gpio_status(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> > + unsigned char value)
> > +{
> > +}
> > +
> > +int read_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> > + unsigned char *pvalue)
> > +{
> > +}
> > +
> > +int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned char PinNumber,
> > + unsigned char value)
> > +{
> > +}
>
> All of the GPIO functions above should move into drivers/gpio.
>
> [Campion] Due to it has a flow need to cowork with EC chip and firmware, it cannot be interrupt
> by other functions. So it needs to keep in here.
Please provide more details.
> > +int write_hwram_command(struct adv_ec_platform_data *adv_ec_data, unsigned char data)
> > +{
> > + int ret;
> > +
> > + mutex_lock(&adv_ec_data->lock);
> > +
> > + ret = ec_wait_write();
> > + if (ret)
> > + goto error;
> > + outb(data, EC_COMMAND_PORT);
> > +
> > + mutex_unlock(&adv_ec_data->lock);
> > + return 0;
> > +
> > +error:
> > + mutex_unlock(&adv_ec_data->lock);
> > +
> > + dev_warn(adv_ec_data->dev, "%s: Wait for IBF or OBF too long. line: %d\n", __func__,
> > + __LINE__);
> > +
> > + return ret;
> > +}
> > +EXPORT_SYMBOL_GPL(write_hwram_command);
> > +
> > +static int adv_ec_get_productname(struct adv_ec_platform_data *adv_ec_data, char *product)
> > +{
> > + const char *vendor, *device;
> > + int length = 0;
> > +
> > + /* Check it is Advantech board */
> > + vendor = dmi_get_system_info(DMI_SYS_VENDOR);
> > + if (memcmp(vendor, "Advantech", sizeof("Advantech")) != 0)
> > + return -ENODEV;
> > +
> > + /* Get product model name */
> > + device = dmi_get_system_info(DMI_PRODUCT_NAME);
> > + if (device) {
> > + while ((device[length] != ' ')
> > + && (length < AMI_ADVANTECH_BOARD_ID_LENGTH))
> > + length++;
> > + memset(product, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
> > + memmove(product, device, length);
> > +
> > + dev_info(adv_ec_data->dev, "BIOS Product Name = %s\n", product);
> > +
> > + return 0;
> > + }
> > +
> > + dev_warn(adv_ec_data->dev, "This device is not Advantech Board (%s)!\n", product);
> > +
> > + return -ENODEV;
> > +}
>
> These should go into drivers/platform.
>
> [Campion] This is a simple function to get module name from BIOS DMI table, it is not need to
> access EC chip. But it can get once and other drivers can get this information,
> donot call DMI every time. Can it keep in here?
I thought this driver was for the EC chip.
> > +static const struct mfd_cell adv_ec_sub_cells[] = {
> > + { .name = "adv-ec-brightness", },
> > + { .name = "adv-ec-eeprom", },
> > + { .name = "adv-ec-gpio", },
> > + { .name = "ahc1ec0-hwmon", },
> > + { .name = "adv-ec-led", },
> > + { .name = "ahc1ec0-wdt", },
> > +};
> > +
> > +static int adv_ec_init_ec_data(struct adv_ec_platform_data *adv_ec_data)
> > +{
> > + int ret;
> > +
> > + adv_ec_data->sub_dev_mask = 0;
> > + adv_ec_data->sub_dev_nb = 0;
> > + adv_ec_data->dym_tbl = NULL;
> > + adv_ec_data->bios_product_name = NULL;
>
> Why are pre-initialising these?
>
> [Campion] Just make sure they have empty pointer, but I will remove it.
There's no need to do that if they are being allocated below.
> > + mutex_init(&adv_ec_data->lock);
> > +
> > + /* Get product name */
> > + adv_ec_data->bios_product_name =
> > + devm_kzalloc(adv_ec_data->dev, AMI_ADVANTECH_BOARD_ID_LENGTH, GFP_KERNEL);
> > + if (!adv_ec_data->bios_product_name)
> > + return -ENOMEM;
> > +
> > + memset(adv_ec_data->bios_product_name, 0, AMI_ADVANTECH_BOARD_ID_LENGTH);
>
> Why are you doing this?
>
> [Campion] Just make sure the memory is null all
devm_kzalloc() does that for you - that's what the 'z' means.
> > + ret = adv_ec_get_productname(adv_ec_data, adv_ec_data->bios_product_name);
> > + if (ret)
> > + return ret;
> > +
> > + /* Get pin table */
> > + adv_ec_data->dym_tbl = devm_kzalloc(adv_ec_data->dev,
> > + EC_MAX_TBL_NUM * sizeof(struct ec_dynamic_table),
> > + GFP_KERNEL);
> > + if (!adv_ec_data->dym_tbl)
> > + return -ENOMEM;
>
> What does a dynamic table do?
>
> [Campion] The dynamic table is reterived from EC firmware according to different platform HW device.
> it will based on dynamic table information to get HW pin definition based on its function.
> The pin value will retrive to calcute the value, for example, voltage value, vcore value.
>
>
> > + ret = adv_get_dynamic_tab(adv_ec_data);
>
> return adv_get_dynamic_tab();
>
> [Campion] OK
>
> > + return ret;
> > +}
> > +
> > +static int adv_ec_parse_prop(struct adv_ec_platform_data *adv_ec_data)
> > +{
> > + int i, ret;
> > + u32 nb, sub_dev[ADVEC_SUBDEV_MAX];
> > +
> > + ret = device_property_read_u32(adv_ec_data->dev, "advantech,sub-dev-nb", &nb);
>
> Indexing devices is generally not a good strategy.
>
> ---------------------------------------------------------------------------
> [Campion] Yes, I will remove it, just use the following that defined in ahc1ec0.yaml.
> I ever feedback related mail for "https://lore.kernel.org/linux-watchdog/20210118123749.4769-6-campion.kang@advantech.com.tw/t/#m5126adbc2453e3ab3e6bda717c257fab364b9f45".
> But vger.kernel.org returned the mail to mail as spam mail.
> I will modity it as the following, is it OK?
> examples:
> - |
> #include <dt-bindings/mfd/ahc1ec0-dt.h>
> ahc1ec0 {
> compatible = "advantech,ahc1ec0";
>
> advantech,hwmon-profile = <AHC1EC0_HWMON_PRO_UNO2271G>;
> advantech,watchdog = true;
Shouldn't the watchdog be it's own sub-node?
Is that functionality not probably at all?
Surely it has it's own register set?
[...]
> > + /* check whether this EC has the following subdevices. */
> > + for (i = 0; i < ARRAY_SIZE(adv_ec_sub_cells); i++) {
> > + if (adv_ec_data->sub_dev_mask & BIT(i)) {
> > + ret = mfd_add_hotplug_devices(dev, &adv_ec_sub_cells[i], 1);
>
> Why have you chosen to use hotplug here?
>
> [Campion] There is a information in BIOS ACPI table according to different device to decide
> which function drivers need to be probe. May be a device has HWMON, it will dynamic
> to load HWMON driver, but other device may not.
The only thing hotplug does is hard-code the platform ID.
It's more of a win if you can omit the mfd_remove_devices() call.
> > + dev_info(adv_ec_data->dev, "mfd_add_hotplug_devices[%d] %s\n", i,
> > + adv_ec_sub_cells[i].name);
> > + if (ret)
> > + dev_err(dev, "failed to add %s subdevice: %d\n",
> > + adv_ec_sub_cells[i].name, ret);
> > + }
> > + }
>
> This is a mess!
>
> Where are you pulling these devices from?
>
> [Campion] decide which drivers need to mount from BIOS ACPI table. This drive would built in Linux Kernel.
> I am not sure what's your meaning, can you describe more? Thank you
I really don't like the sub_dev_mask idea.
Are the ACPI tables available?
[...]
> > +struct adv_ec_platform_data {
> > + char *bios_product_name;
>
> Where is this used?
>
> [Campion] Get the module name once and upper application can get it by EC driver.
From DMI? What do you use it for? Debug prints or something else?
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller
[not found] ` <f47a66c80d8b4cf6b9c28a4519a10521@Taipei11.ADVANTECH.CORP>
@ 2021-03-24 8:44 ` Lee Jones
0 siblings, 0 replies; 20+ messages in thread
From: Lee Jones @ 2021-03-24 8:44 UTC (permalink / raw)
To: Campion.Kang
Cc: chia-lin.kao, devicetree, jdelvare, linux-hwmon, linux-kernel,
linux-watchdog, linux, robh+dt, wim, Campion.Kang
On Wed, 24 Mar 2021, Campion.Kang wrote:
> Thanks a lot, please see below descriptions.
>
> >-----Original Message-----
> >From: Lee Jones <lee.jones@linaro.org>
> >Sent: Friday, March 19, 2021 10:15 PM
> >To: Campion.Kang <Campion.Kang@advantech.com.tw>
> >Cc: chia-lin.kao@canonical.com; devicetree@vger.kernel.org;
> >jdelvare@suse.com; linux-hwmon@vger.kernel.org;
> >linux-kernel@vger.kernel.org; linux-watchdog@vger.kernel.org;
> >linux@roeck-us.net; robh+dt@kernel.org; wim@linux-watchdog.org;
> >Campion.Kang@gmail.com
> >Subject: Re: [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech
> >embedded controller
> >
> >On Fri, 19 Mar 2021, Campion Kang wrote:
> >
> >>
> >> Please check [Campion] text in below as my reply.
> >
> >This is a mess. Please setup your mailer to quote correctly.
> >
> >> Sorry, due to the mail was rejected by vger.kernel.org as SPAM before
> >> so I reply the mail late and had some test email before.
> >>
> >> -----------------------------------------------------------------------------------------
> >> Date: Tue, 9 Mar 2021 16:07:55 +0000
> >> From: Lee Jones <lee.jones@linaro.org>
> >
> >[...]
> >
> >> > +enum {
> >> > + ADVEC_SUBDEV_BRIGHTNESS = 0,
> >> > + ADVEC_SUBDEV_EEPROM,
> >> > + ADVEC_SUBDEV_GPIO,
> >> > + ADVEC_SUBDEV_HWMON,
> >> > + ADVEC_SUBDEV_LED,
> >> > + ADVEC_SUBDEV_WDT,
> >> > + ADVEC_SUBDEV_MAX,
> >> > +};
> >>
> >> Are these arbitrary?
> >> [Campion] cannot arbitrary there, due to it is a index to identify its number
> >of sub device.
> >
> >I'm asking what this is dictated by.
> >
> >Are these ID/index values written into H/W?
> >
>
> These index written in BIOS ACPI table.
Please consider renaming to make this clear.
ADVEC_ACPI_ID_{DEVICE}
Add a comment to express the importance of the order too.
[...]
> >> > +int write_gpio_dir(struct adv_ec_platform_data *adv_ec_data, unsigned
> >char PinNumber,
> >> > + unsigned char value)
> >> > +{
> >> > +}
> >>
> >> All of the GPIO functions above should move into drivers/gpio.
> >>
> >> [Campion] Due to it has a flow need to cowork with EC chip and firmware, it
> >cannot be interrupt
> >> by other functions. So it needs to keep in here.
> >
> >Please provide more details.
>
> These gpio functions are common used for gpio to adjust the gpio direction and access its status. It has a complete lower process with EC that cannot be interrupted likes others. The flow is:
> 0.mutex lock to get the EC access
> 1.it needs wait IBF (Input Buffer Full) to be clear and then can send the command
> 2.Send read command to EC command port
> 3.wait IBF clear that means command is got by EC
> 4.send read address to EC data port
> 5.wait OBF (Output Buffer Full) data ready
> 6.get data from EC data port
> 7.mutex unlock
> So it cannot be interrupted as other EC lower access due to they use the same mutex to lock the flow.
That's fine. You can share a lock with the GPIO driver.
> >> But vger.kernel.org returned the mail to mail as spam mail.
> >> I will modity it as the following, is it OK?
> >> examples:
> >> - |
> >> #include <dt-bindings/mfd/ahc1ec0-dt.h>
> >> ahc1ec0 {
> >> compatible = "advantech,ahc1ec0";
> >>
> >> advantech,hwmon-profile =
> ><AHC1EC0_HWMON_PRO_UNO2271G>;
> >> advantech,watchdog = true;
> >
> >Shouldn't the watchdog be it's own sub-node?
>
> it doesnot need so far.
IMO, it's more clear than having a property.
[...]
> [Campion.Kang] So far, some registers or settings are have default value. They can be adjusted by runtime.
> Is this ahc1ec0.yaml OK?
Rob has the final say on that.
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2021-03-24 8:44 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-01-18 12:37 [PATCH v6 1/6] MAINTAINERS: Add Advantech AHC1EC0 embedded controller entry Campion Kang
2021-01-18 12:37 ` [PATCH v6 2/6] mfd: ahc1ec0: Add Advantech EC include file used by dt-bindings Campion Kang
2021-02-04 10:32 ` Lee Jones
2021-01-18 12:37 ` [PATCH v6 3/6] dt-bindings: mfd: ahc1ec0.yaml: Add Advantech embedded controller - AHC1EC0 Campion Kang
2021-02-05 21:21 ` Rob Herring
2021-01-18 12:37 ` [PATCH v6 4/6] mfd: ahc1ec0: Add support for Advantech embedded controller Campion Kang
2021-01-19 7:25 ` AceLan Kao
2021-01-19 8:23 ` Lee Jones
2021-03-09 16:07 ` Lee Jones
[not found] ` <22025d6fb74e49a1835f89cfa0849990@Taipei11.ADVANTECH.CORP>
2021-03-12 7:14 ` FW: " Campion Kang
2021-03-19 10:01 ` Campion Kang
2021-03-19 14:14 ` Lee Jones
[not found] ` <f47a66c80d8b4cf6b9c28a4519a10521@Taipei11.ADVANTECH.CORP>
2021-03-24 8:44 ` Lee Jones
2021-01-18 12:37 ` [PATCH v6 5/6] hwmon: ahc1ec0-hwmon: Add sub-device hwmon " Campion Kang
2021-01-19 7:26 ` AceLan Kao
2021-01-23 16:35 ` Guenter Roeck
[not found] ` <66338d379bb14c2fbd8a6507075384ce@Taipei11.ADVANTECH.CORP>
2021-01-28 15:13 ` Guenter Roeck
2021-01-18 12:37 ` [PATCH v6 6/6] watchdog: ahc1ec0-wdt: Add sub-device watchdog " Campion Kang
2021-01-19 7:26 ` AceLan Kao
2021-01-23 17:00 ` Guenter Roeck
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).