linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH V5] watchdog: mtk: support dual mode when the bark irq is available
@ 2021-04-21  8:05 Wang Qing
  2021-04-21 12:45 ` kernel test robot
                   ` (3 more replies)
  0 siblings, 4 replies; 5+ messages in thread
From: Wang Qing @ 2021-04-21  8:05 UTC (permalink / raw)
  To: Wim Van Sebroeck, Guenter Roeck, Matthias Brugger,
	linux-watchdog, linux-arm-kernel, linux-mediatek, linux-kernel
  Cc: Wang Qing

Support using irq handling wdt bark first instead of directly resetting.

When the watchdog timer expires in dual mode, an interrupt will be
triggered first, then the timing restarts. The reset signal will be
initiated when the timer expires again.

The dual mode is disabled by default.

V2:
- panic() by default if WATCHDOG_PRETIMEOUT_GOV is not enabled.

V3:
- Modify the pretimeout behavior, manually reset after the pretimeout
- is processed and wait until timeout.

V4:
- Remove pretimeout related processing. 
- Add dual mode control separately.

V5:
- Fix some formatting and printing problems.

Signed-off-by: Wang Qing <wangqing@vivo.com>
---
 drivers/watchdog/mtk_wdt.c | 36 ++++++++++++++++++++++++++++++++----
 1 file changed, 32 insertions(+), 4 deletions(-)

diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index 97ca993..40122f8
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -25,6 +25,7 @@
 #include <linux/reset-controller.h>
 #include <linux/types.h>
 #include <linux/watchdog.h>
+#include <linux/interrupt.h>
 
 #define WDT_MAX_TIMEOUT		31
 #define WDT_MIN_TIMEOUT		1
@@ -57,6 +58,7 @@
 
 static bool nowayout = WATCHDOG_NOWAYOUT;
 static unsigned int timeout;
+static bool dual_mode;
 
 struct mtk_wdt_dev {
 	struct watchdog_device wdt_dev;
@@ -239,13 +241,23 @@ static int mtk_wdt_start(struct watchdog_device *wdt_dev)
 		return ret;
 
 	reg = ioread32(wdt_base + WDT_MODE);
-	reg &= ~(WDT_MODE_IRQ_EN | WDT_MODE_DUAL_EN);
+	if (dual_mode)
+		reg |= (WDT_MODE_IRQ_EN | WDT_MODE_DUAL_EN);
+	else
+		reg &= ~(WDT_MODE_IRQ_EN | WDT_MODE_DUAL_EN);
 	reg |= (WDT_MODE_EN | WDT_MODE_KEY);
 	iowrite32(reg, wdt_base + WDT_MODE);
 
 	return 0;
 }
 
+static irqreturn_t mtk_wdt_isr(int irq, void *arg)
+{
+	panic("wdt bark!\n");
+
+	return IRQ_HANDLED;
+}
+
 static const struct watchdog_info mtk_wdt_info = {
 	.identity	= DRV_NAME,
 	.options	= WDIOF_SETTIMEOUT |
@@ -267,7 +279,7 @@ static int mtk_wdt_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct mtk_wdt_dev *mtk_wdt;
 	const struct mtk_wdt_data *wdt_data;
-	int err;
+	int err, irq;
 
 	mtk_wdt = devm_kzalloc(dev, sizeof(*mtk_wdt), GFP_KERNEL);
 	if (!mtk_wdt)
@@ -279,6 +291,19 @@ static int mtk_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(mtk_wdt->wdt_base))
 		return PTR_ERR(mtk_wdt->wdt_base);
 
+	if (dual_mode) {
+		irq = platform_get_irq(pdev, 0);
+		if (irq > 0) {
+			err = devm_request_irq(&pdev->dev, irq, mtk_wdt_isr, 0, "wdt_bark",
+						&mtk_wdt->wdt_dev);
+			if (err)
+				return err;
+		} else {
+			dual_mode = 0;
+			dev_info(&pdev->dev, "couldn't get wdt irq, set dual_mode = 0\n");
+		}
+	}
+
 	mtk_wdt->wdt_dev.info = &mtk_wdt_info;
 	mtk_wdt->wdt_dev.ops = &mtk_wdt_ops;
 	mtk_wdt->wdt_dev.timeout = WDT_MAX_TIMEOUT;
@@ -299,8 +324,8 @@ static int mtk_wdt_probe(struct platform_device *pdev)
 	if (unlikely(err))
 		return err;
 
-	dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n",
-		 mtk_wdt->wdt_dev.timeout, nowayout);
+	dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
+		 dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
 
 	wdt_data = of_device_get_match_data(dev);
 	if (wdt_data) {
@@ -368,6 +393,9 @@ module_param(nowayout, bool, 0);
 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
 			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
 
+module_param(dual_mode, bool, 0);
+MODULE_PARM_DESC(dual_mode, "Dual mode triggers irq before reset (default=0)");
+
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Matthias Brugger <matthias.bgg@gmail.com>");
 MODULE_DESCRIPTION("Mediatek WatchDog Timer Driver");
-- 
2.7.4


^ permalink raw reply related	[flat|nested] 5+ messages in thread

* Re: [PATCH V5] watchdog: mtk: support dual mode when the bark irq is available
  2021-04-21  8:05 [PATCH V5] watchdog: mtk: support dual mode when the bark irq is available Wang Qing
@ 2021-04-21 12:45 ` kernel test robot
  2021-04-21 12:45 ` kernel test robot
                   ` (2 subsequent siblings)
  3 siblings, 0 replies; 5+ messages in thread
From: kernel test robot @ 2021-04-21 12:45 UTC (permalink / raw)
  To: Wang Qing, Wim Van Sebroeck, Guenter Roeck, Matthias Brugger,
	linux-watchdog, linux-arm-kernel, linux-mediatek, linux-kernel
  Cc: kbuild-all, clang-built-linux, Wang Qing

[-- Attachment #1: Type: text/plain, Size: 4564 bytes --]

Hi Wang,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on hwmon/hwmon-next]
[also build test ERROR on soc/for-next linus/master v5.12-rc8 next-20210420]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Wang-Qing/watchdog-mtk-support-dual-mode-when-the-bark-irq-is-available/20210421-160730
base:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
config: mips-randconfig-r031-20210421 (attached as .config)
compiler: clang version 13.0.0 (https://github.com/llvm/llvm-project d87b9b81ccb95217181ce75515c6c68bbb408ca4)
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # install mips cross compiling tool for clang build
        # apt-get install binutils-mips-linux-gnu
        # https://github.com/0day-ci/linux/commit/bb28c4d8391120b54c691e2407dae46761ef69af
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Wang-Qing/watchdog-mtk-support-dual-mode-when-the-bark-irq-is-available/20210421-160730
        git checkout bb28c4d8391120b54c691e2407dae46761ef69af
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 ARCH=mips 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All error/warnings (new ones prefixed by >>):

>> drivers/watchdog/mtk_wdt.c:327:16: warning: missing terminating '"' character [-Winvalid-pp-token]
           dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
                         ^
>> drivers/watchdog/mtk_wdt.c:327:16: error: expected expression
   drivers/watchdog/mtk_wdt.c:328:19: warning: missing terminating '"' character [-Winvalid-pp-token]
                    dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
                                   ^
   2 warnings and 1 error generated.


vim +327 drivers/watchdog/mtk_wdt.c

   276	
   277	static int mtk_wdt_probe(struct platform_device *pdev)
   278	{
   279		struct device *dev = &pdev->dev;
   280		struct mtk_wdt_dev *mtk_wdt;
   281		const struct mtk_wdt_data *wdt_data;
   282		int err, irq;
   283	
   284		mtk_wdt = devm_kzalloc(dev, sizeof(*mtk_wdt), GFP_KERNEL);
   285		if (!mtk_wdt)
   286			return -ENOMEM;
   287	
   288		platform_set_drvdata(pdev, mtk_wdt);
   289	
   290		mtk_wdt->wdt_base = devm_platform_ioremap_resource(pdev, 0);
   291		if (IS_ERR(mtk_wdt->wdt_base))
   292			return PTR_ERR(mtk_wdt->wdt_base);
   293	
   294		if (dual_mode) {
   295			irq = platform_get_irq(pdev, 0);
   296			if (irq > 0) {
   297				err = devm_request_irq(&pdev->dev, irq, mtk_wdt_isr, 0, "wdt_bark",
   298							&mtk_wdt->wdt_dev);
   299				if (err)
   300					return err;
   301			} else {
   302				dual_mode = 0;
   303				dev_info(&pdev->dev, "couldn't get wdt irq, set dual_mode = 0\n");
   304			}
   305		}
   306	
   307		mtk_wdt->wdt_dev.info = &mtk_wdt_info;
   308		mtk_wdt->wdt_dev.ops = &mtk_wdt_ops;
   309		mtk_wdt->wdt_dev.timeout = WDT_MAX_TIMEOUT;
   310		mtk_wdt->wdt_dev.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT * 1000;
   311		mtk_wdt->wdt_dev.min_timeout = WDT_MIN_TIMEOUT;
   312		mtk_wdt->wdt_dev.parent = dev;
   313	
   314		watchdog_init_timeout(&mtk_wdt->wdt_dev, timeout, dev);
   315		watchdog_set_nowayout(&mtk_wdt->wdt_dev, nowayout);
   316		watchdog_set_restart_priority(&mtk_wdt->wdt_dev, 128);
   317	
   318		watchdog_set_drvdata(&mtk_wdt->wdt_dev, mtk_wdt);
   319	
   320		mtk_wdt_init(&mtk_wdt->wdt_dev);
   321	
   322		watchdog_stop_on_reboot(&mtk_wdt->wdt_dev);
   323		err = devm_watchdog_register_device(dev, &mtk_wdt->wdt_dev);
   324		if (unlikely(err))
   325			return err;
   326	
 > 327		dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
   328			 dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
   329	
   330		wdt_data = of_device_get_match_data(dev);
   331		if (wdt_data) {
   332			err = toprgu_register_reset_controller(pdev,
   333							       wdt_data->toprgu_sw_rst_num);
   334			if (err)
   335				return err;
   336		}
   337		return 0;
   338	}
   339	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 39092 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH V5] watchdog: mtk: support dual mode when the bark irq is available
  2021-04-21  8:05 [PATCH V5] watchdog: mtk: support dual mode when the bark irq is available Wang Qing
  2021-04-21 12:45 ` kernel test robot
@ 2021-04-21 12:45 ` kernel test robot
  2021-04-21 14:11 ` Guenter Roeck
  2021-04-21 15:04 ` kernel test robot
  3 siblings, 0 replies; 5+ messages in thread
From: kernel test robot @ 2021-04-21 12:45 UTC (permalink / raw)
  To: Wang Qing, Wim Van Sebroeck, Guenter Roeck, Matthias Brugger,
	linux-watchdog, linux-arm-kernel, linux-mediatek, linux-kernel
  Cc: kbuild-all, Wang Qing

[-- Attachment #1: Type: text/plain, Size: 6176 bytes --]

Hi Wang,

Thank you for the patch! Perhaps something to improve:

[auto build test WARNING on hwmon/hwmon-next]
[also build test WARNING on soc/for-next linus/master v5.12-rc8 next-20210420]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Wang-Qing/watchdog-mtk-support-dual-mode-when-the-bark-irq-is-available/20210421-160730
base:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
config: arc-allyesconfig (attached as .config)
compiler: arceb-elf-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/bb28c4d8391120b54c691e2407dae46761ef69af
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Wang-Qing/watchdog-mtk-support-dual-mode-when-the-bark-irq-is-available/20210421-160730
        git checkout bb28c4d8391120b54c691e2407dae46761ef69af
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross W=1 ARCH=arc 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All warnings (new ones prefixed by >>):

   drivers/watchdog/mtk_wdt.c: In function 'mtk_wdt_probe':
>> drivers/watchdog/mtk_wdt.c:327:16: warning: missing terminating " character
     327 |  dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
         |                ^
   In file included from include/linux/device.h:15,
                    from include/linux/node.h:18,
                    from include/linux/cpu.h:17,
                    from include/linux/of_device.h:5,
                    from drivers/watchdog/mtk_wdt.c:23:
   drivers/watchdog/mtk_wdt.c:327:16: error: missing terminating " character
     327 |  dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
         |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/dev_printk.h:19:22: note: in definition of macro 'dev_fmt'
      19 | #define dev_fmt(fmt) fmt
         |                      ^~~
   drivers/watchdog/mtk_wdt.c:327:2: note: in expansion of macro 'dev_info'
     327 |  dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
         |  ^~~~~~~~
   drivers/watchdog/mtk_wdt.c:328:14: error: expected expression before '%' token
     328 |    dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
         |              ^
   include/linux/dev_printk.h:19:22: note: in definition of macro 'dev_fmt'
      19 | #define dev_fmt(fmt) fmt
         |                      ^~~
   drivers/watchdog/mtk_wdt.c:327:2: note: in expansion of macro 'dev_info'
     327 |  dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
         |  ^~~~~~~~
   drivers/watchdog/mtk_wdt.c:328:17: error: stray '\' in program
     328 |    dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
         |                 ^
   drivers/watchdog/mtk_wdt.c:328:18: error: expected ';' before 'n'
     328 |    dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
         |                  ^
   drivers/watchdog/mtk_wdt.c:328:19: warning: missing terminating " character
     328 |    dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
         |                   ^
   drivers/watchdog/mtk_wdt.c:328:19: error: missing terminating " character
     328 |    dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
         |                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


vim +327 drivers/watchdog/mtk_wdt.c

   276	
   277	static int mtk_wdt_probe(struct platform_device *pdev)
   278	{
   279		struct device *dev = &pdev->dev;
   280		struct mtk_wdt_dev *mtk_wdt;
   281		const struct mtk_wdt_data *wdt_data;
   282		int err, irq;
   283	
   284		mtk_wdt = devm_kzalloc(dev, sizeof(*mtk_wdt), GFP_KERNEL);
   285		if (!mtk_wdt)
   286			return -ENOMEM;
   287	
   288		platform_set_drvdata(pdev, mtk_wdt);
   289	
   290		mtk_wdt->wdt_base = devm_platform_ioremap_resource(pdev, 0);
   291		if (IS_ERR(mtk_wdt->wdt_base))
   292			return PTR_ERR(mtk_wdt->wdt_base);
   293	
   294		if (dual_mode) {
   295			irq = platform_get_irq(pdev, 0);
   296			if (irq > 0) {
   297				err = devm_request_irq(&pdev->dev, irq, mtk_wdt_isr, 0, "wdt_bark",
   298							&mtk_wdt->wdt_dev);
   299				if (err)
   300					return err;
   301			} else {
   302				dual_mode = 0;
   303				dev_info(&pdev->dev, "couldn't get wdt irq, set dual_mode = 0\n");
   304			}
   305		}
   306	
   307		mtk_wdt->wdt_dev.info = &mtk_wdt_info;
   308		mtk_wdt->wdt_dev.ops = &mtk_wdt_ops;
   309		mtk_wdt->wdt_dev.timeout = WDT_MAX_TIMEOUT;
   310		mtk_wdt->wdt_dev.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT * 1000;
   311		mtk_wdt->wdt_dev.min_timeout = WDT_MIN_TIMEOUT;
   312		mtk_wdt->wdt_dev.parent = dev;
   313	
   314		watchdog_init_timeout(&mtk_wdt->wdt_dev, timeout, dev);
   315		watchdog_set_nowayout(&mtk_wdt->wdt_dev, nowayout);
   316		watchdog_set_restart_priority(&mtk_wdt->wdt_dev, 128);
   317	
   318		watchdog_set_drvdata(&mtk_wdt->wdt_dev, mtk_wdt);
   319	
   320		mtk_wdt_init(&mtk_wdt->wdt_dev);
   321	
   322		watchdog_stop_on_reboot(&mtk_wdt->wdt_dev);
   323		err = devm_watchdog_register_device(dev, &mtk_wdt->wdt_dev);
   324		if (unlikely(err))
   325			return err;
   326	
 > 327		dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
   328			 dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
   329	
   330		wdt_data = of_device_get_match_data(dev);
   331		if (wdt_data) {
   332			err = toprgu_register_reset_controller(pdev,
   333							       wdt_data->toprgu_sw_rst_num);
   334			if (err)
   335				return err;
   336		}
   337		return 0;
   338	}
   339	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 67500 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH V5] watchdog: mtk: support dual mode when the bark irq is available
  2021-04-21  8:05 [PATCH V5] watchdog: mtk: support dual mode when the bark irq is available Wang Qing
  2021-04-21 12:45 ` kernel test robot
  2021-04-21 12:45 ` kernel test robot
@ 2021-04-21 14:11 ` Guenter Roeck
  2021-04-21 15:04 ` kernel test robot
  3 siblings, 0 replies; 5+ messages in thread
From: Guenter Roeck @ 2021-04-21 14:11 UTC (permalink / raw)
  To: Wang Qing, Wim Van Sebroeck, Matthias Brugger, linux-watchdog,
	linux-arm-kernel, linux-mediatek, linux-kernel

On 4/21/21 1:05 AM, Wang Qing wrote:
> Support using irq handling wdt bark first instead of directly resetting.
> 
> When the watchdog timer expires in dual mode, an interrupt will be
> triggered first, then the timing restarts. The reset signal will be
> initiated when the timer expires again.
> 
> The dual mode is disabled by default.
> 

This means the real timeout is now timeout * 2. This is not what
is supposed to happen. The hard watchdog timeout needs to happen at
'timeout'.

If you want to do this, it needs to be done using pre-timeout,
only the pre-timeout time (and thus the watchdog timeout written
into the chip) must be limited to timeout / 2. Pre-timeout must
by default be disabled and only be supported if an interrupt was
provided.

I don't see a need for an additional module parameter. Providing
an interrupt implies that pre-timeout support is wanted. This needs
to be documented accordingly.

I am not lot looking at the errors reported by 0-day. Please address those.

Guenter

> V2:
> - panic() by default if WATCHDOG_PRETIMEOUT_GOV is not enabled.
> 
> V3:
> - Modify the pretimeout behavior, manually reset after the pretimeout
> - is processed and wait until timeout.
> 
> V4:
> - Remove pretimeout related processing. 
> - Add dual mode control separately.
> 
> V5:
> - Fix some formatting and printing problems.
> 
> Signed-off-by: Wang Qing <wangqing@vivo.com>
> ---
>  drivers/watchdog/mtk_wdt.c | 36 ++++++++++++++++++++++++++++++++----
>  1 file changed, 32 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
> index 97ca993..40122f8
> --- a/drivers/watchdog/mtk_wdt.c
> +++ b/drivers/watchdog/mtk_wdt.c
> @@ -25,6 +25,7 @@
>  #include <linux/reset-controller.h>
>  #include <linux/types.h>
>  #include <linux/watchdog.h>
> +#include <linux/interrupt.h>
>  
>  #define WDT_MAX_TIMEOUT		31
>  #define WDT_MIN_TIMEOUT		1
> @@ -57,6 +58,7 @@
>  
>  static bool nowayout = WATCHDOG_NOWAYOUT;
>  static unsigned int timeout;
> +static bool dual_mode;
>  
>  struct mtk_wdt_dev {
>  	struct watchdog_device wdt_dev;
> @@ -239,13 +241,23 @@ static int mtk_wdt_start(struct watchdog_device *wdt_dev)
>  		return ret;
>  
>  	reg = ioread32(wdt_base + WDT_MODE);
> -	reg &= ~(WDT_MODE_IRQ_EN | WDT_MODE_DUAL_EN);
> +	if (dual_mode)
> +		reg |= (WDT_MODE_IRQ_EN | WDT_MODE_DUAL_EN);
> +	else
> +		reg &= ~(WDT_MODE_IRQ_EN | WDT_MODE_DUAL_EN);
>  	reg |= (WDT_MODE_EN | WDT_MODE_KEY);
>  	iowrite32(reg, wdt_base + WDT_MODE);
>  
>  	return 0;
>  }
>  
> +static irqreturn_t mtk_wdt_isr(int irq, void *arg)
> +{
> +	panic("wdt bark!\n");
> +
> +	return IRQ_HANDLED;
> +}
> +
>  static const struct watchdog_info mtk_wdt_info = {
>  	.identity	= DRV_NAME,
>  	.options	= WDIOF_SETTIMEOUT |
> @@ -267,7 +279,7 @@ static int mtk_wdt_probe(struct platform_device *pdev)
>  	struct device *dev = &pdev->dev;
>  	struct mtk_wdt_dev *mtk_wdt;
>  	const struct mtk_wdt_data *wdt_data;
> -	int err;
> +	int err, irq;
>  
>  	mtk_wdt = devm_kzalloc(dev, sizeof(*mtk_wdt), GFP_KERNEL);
>  	if (!mtk_wdt)
> @@ -279,6 +291,19 @@ static int mtk_wdt_probe(struct platform_device *pdev)
>  	if (IS_ERR(mtk_wdt->wdt_base))
>  		return PTR_ERR(mtk_wdt->wdt_base);
>  
> +	if (dual_mode) {
> +		irq = platform_get_irq(pdev, 0);
> +		if (irq > 0) {
> +			err = devm_request_irq(&pdev->dev, irq, mtk_wdt_isr, 0, "wdt_bark",
> +						&mtk_wdt->wdt_dev);
> +			if (err)
> +				return err;
> +		} else {
> +			dual_mode = 0;
> +			dev_info(&pdev->dev, "couldn't get wdt irq, set dual_mode = 0\n");
> +		}
> +	}
> +
>  	mtk_wdt->wdt_dev.info = &mtk_wdt_info;
>  	mtk_wdt->wdt_dev.ops = &mtk_wdt_ops;
>  	mtk_wdt->wdt_dev.timeout = WDT_MAX_TIMEOUT;
> @@ -299,8 +324,8 @@ static int mtk_wdt_probe(struct platform_device *pdev)
>  	if (unlikely(err))
>  		return err;
>  
> -	dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)\n",
> -		 mtk_wdt->wdt_dev.timeout, nowayout);
> +	dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
> +		 dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
>  
>  	wdt_data = of_device_get_match_data(dev);
>  	if (wdt_data) {
> @@ -368,6 +393,9 @@ module_param(nowayout, bool, 0);
>  MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
>  			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
>  
> +module_param(dual_mode, bool, 0);
> +MODULE_PARM_DESC(dual_mode, "Dual mode triggers irq before reset (default=0)");
> +
>  MODULE_LICENSE("GPL");
>  MODULE_AUTHOR("Matthias Brugger <matthias.bgg@gmail.com>");
>  MODULE_DESCRIPTION("Mediatek WatchDog Timer Driver");
> 


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [PATCH V5] watchdog: mtk: support dual mode when the bark irq is available
  2021-04-21  8:05 [PATCH V5] watchdog: mtk: support dual mode when the bark irq is available Wang Qing
                   ` (2 preceding siblings ...)
  2021-04-21 14:11 ` Guenter Roeck
@ 2021-04-21 15:04 ` kernel test robot
  3 siblings, 0 replies; 5+ messages in thread
From: kernel test robot @ 2021-04-21 15:04 UTC (permalink / raw)
  To: Wang Qing, Wim Van Sebroeck, Guenter Roeck, Matthias Brugger,
	linux-watchdog, linux-arm-kernel, linux-mediatek, linux-kernel
  Cc: kbuild-all, Wang Qing

[-- Attachment #1: Type: text/plain, Size: 7607 bytes --]

Hi Wang,

Thank you for the patch! Yet something to improve:

[auto build test ERROR on hwmon/hwmon-next]
[also build test ERROR on soc/for-next linus/master v5.12-rc8 next-20210421]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch]

url:    https://github.com/0day-ci/linux/commits/Wang-Qing/watchdog-mtk-support-dual-mode-when-the-bark-irq-is-available/20210421-160730
base:   https://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging.git hwmon-next
config: nds32-randconfig-r021-20210421 (attached as .config)
compiler: nds32le-linux-gcc (GCC) 9.3.0
reproduce (this is a W=1 build):
        wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
        chmod +x ~/bin/make.cross
        # https://github.com/0day-ci/linux/commit/bb28c4d8391120b54c691e2407dae46761ef69af
        git remote add linux-review https://github.com/0day-ci/linux
        git fetch --no-tags linux-review Wang-Qing/watchdog-mtk-support-dual-mode-when-the-bark-irq-is-available/20210421-160730
        git checkout bb28c4d8391120b54c691e2407dae46761ef69af
        # save the attached .config to linux build tree
        COMPILER_INSTALL_PATH=$HOME/0day COMPILER=gcc-9.3.0 make.cross W=1 ARCH=nds32 

If you fix the issue, kindly add following tag as appropriate
Reported-by: kernel test robot <lkp@intel.com>

All errors (new ones prefixed by >>):

   In file included from include/linux/sched.h:12,
                    from include/linux/ptrace.h:6,
                    from include/uapi/asm-generic/bpf_perf_event.h:4,
                    from ./arch/nds32/include/generated/uapi/asm/bpf_perf_event.h:1,
                    from include/uapi/linux/bpf_perf_event.h:11,
                    from include/linux/perf_event.h:18,
                    from arch/nds32/kernel/perf_event_cpu.c:9:
   arch/nds32/kernel/perf_event_cpu.c: In function 'unwind_frame_kernel':
>> arch/nds32/include/asm/current.h:10:13: error: '$r25' undeclared (first use in this function)
      10 | #define tsk $r25
         |             ^~~~
   arch/nds32/kernel/perf_event_cpu.c:1255:8: note: in expansion of macro 'tsk'
    1255 |       (tsk, &graph, frame->lp, NULL);
         |        ^~~
   arch/nds32/include/asm/current.h:10:13: note: each undeclared identifier is reported only once for each function it appears in
      10 | #define tsk $r25
         |             ^~~~
   arch/nds32/kernel/perf_event_cpu.c:1255:8: note: in expansion of macro 'tsk'
    1255 |       (tsk, &graph, frame->lp, NULL);
         |        ^~~
   arch/nds32/kernel/perf_event_cpu.c:1257:13: warning: assignment to 'long unsigned int' from 'long unsigned int *' makes integer from pointer without a cast [-Wint-conversion]
    1257 |   frame->sp = ((unsigned long *)frame->sp) + 1;
         |             ^
--
   drivers/watchdog/mtk_wdt.c: In function 'mtk_wdt_probe':
   drivers/watchdog/mtk_wdt.c:327:16: warning: missing terminating " character
     327 |  dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
         |                ^
   In file included from include/linux/device.h:15,
                    from include/linux/node.h:18,
                    from include/linux/cpu.h:17,
                    from include/linux/of_device.h:5,
                    from drivers/watchdog/mtk_wdt.c:23:
>> drivers/watchdog/mtk_wdt.c:327:16: error: missing terminating " character
     327 |  dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
         |                ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
   include/linux/dev_printk.h:19:22: note: in definition of macro 'dev_fmt'
      19 | #define dev_fmt(fmt) fmt
         |                      ^~~
   drivers/watchdog/mtk_wdt.c:327:2: note: in expansion of macro 'dev_info'
     327 |  dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
         |  ^~~~~~~~
>> drivers/watchdog/mtk_wdt.c:328:14: error: expected expression before '%' token
     328 |    dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
         |              ^
   include/linux/dev_printk.h:19:22: note: in definition of macro 'dev_fmt'
      19 | #define dev_fmt(fmt) fmt
         |                      ^~~
   drivers/watchdog/mtk_wdt.c:327:2: note: in expansion of macro 'dev_info'
     327 |  dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
         |  ^~~~~~~~
   drivers/watchdog/mtk_wdt.c:328:17: error: stray '\' in program
     328 |    dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
         |                 ^
>> drivers/watchdog/mtk_wdt.c:328:18: error: expected ';' before 'n'
     328 |    dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
         |                  ^
   drivers/watchdog/mtk_wdt.c:328:19: warning: missing terminating " character
     328 |    dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
         |                   ^
   drivers/watchdog/mtk_wdt.c:328:19: error: missing terminating " character
     328 |    dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
         |                   ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~


vim +327 drivers/watchdog/mtk_wdt.c

   276	
   277	static int mtk_wdt_probe(struct platform_device *pdev)
   278	{
   279		struct device *dev = &pdev->dev;
   280		struct mtk_wdt_dev *mtk_wdt;
   281		const struct mtk_wdt_data *wdt_data;
   282		int err, irq;
   283	
   284		mtk_wdt = devm_kzalloc(dev, sizeof(*mtk_wdt), GFP_KERNEL);
   285		if (!mtk_wdt)
   286			return -ENOMEM;
   287	
   288		platform_set_drvdata(pdev, mtk_wdt);
   289	
   290		mtk_wdt->wdt_base = devm_platform_ioremap_resource(pdev, 0);
   291		if (IS_ERR(mtk_wdt->wdt_base))
   292			return PTR_ERR(mtk_wdt->wdt_base);
   293	
   294		if (dual_mode) {
   295			irq = platform_get_irq(pdev, 0);
   296			if (irq > 0) {
   297				err = devm_request_irq(&pdev->dev, irq, mtk_wdt_isr, 0, "wdt_bark",
   298							&mtk_wdt->wdt_dev);
   299				if (err)
   300					return err;
   301			} else {
   302				dual_mode = 0;
   303				dev_info(&pdev->dev, "couldn't get wdt irq, set dual_mode = 0\n");
   304			}
   305		}
   306	
   307		mtk_wdt->wdt_dev.info = &mtk_wdt_info;
   308		mtk_wdt->wdt_dev.ops = &mtk_wdt_ops;
   309		mtk_wdt->wdt_dev.timeout = WDT_MAX_TIMEOUT;
   310		mtk_wdt->wdt_dev.max_hw_heartbeat_ms = WDT_MAX_TIMEOUT * 1000;
   311		mtk_wdt->wdt_dev.min_timeout = WDT_MIN_TIMEOUT;
   312		mtk_wdt->wdt_dev.parent = dev;
   313	
   314		watchdog_init_timeout(&mtk_wdt->wdt_dev, timeout, dev);
   315		watchdog_set_nowayout(&mtk_wdt->wdt_dev, nowayout);
   316		watchdog_set_restart_priority(&mtk_wdt->wdt_dev, 128);
   317	
   318		watchdog_set_drvdata(&mtk_wdt->wdt_dev, mtk_wdt);
   319	
   320		mtk_wdt_init(&mtk_wdt->wdt_dev);
   321	
   322		watchdog_stop_on_reboot(&mtk_wdt->wdt_dev);
   323		err = devm_watchdog_register_device(dev, &mtk_wdt->wdt_dev);
   324		if (unlikely(err))
   325			return err;
   326	
 > 327		dev_info(dev, "Watchdog enabled (timeout=%d sec, nowayout=%d,
 > 328			 dual_mode=%d)\n", mtk_wdt->wdt_dev.timeout, nowayout, dual_mode);
   329	
   330		wdt_data = of_device_get_match_data(dev);
   331		if (wdt_data) {
   332			err = toprgu_register_reset_controller(pdev,
   333							       wdt_data->toprgu_sw_rst_num);
   334			if (err)
   335				return err;
   336		}
   337		return 0;
   338	}
   339	

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org

[-- Attachment #2: .config.gz --]
[-- Type: application/gzip, Size: 33906 bytes --]

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2021-04-21 15:04 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-21  8:05 [PATCH V5] watchdog: mtk: support dual mode when the bark irq is available Wang Qing
2021-04-21 12:45 ` kernel test robot
2021-04-21 12:45 ` kernel test robot
2021-04-21 14:11 ` Guenter Roeck
2021-04-21 15:04 ` kernel test robot

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).