From: Samuel Holland <samuel@sholland.org>
To: Wim Van Sebroeck <wim@linux-watchdog.org>,
Guenter Roeck <linux@roeck-us.net>,
Rob Herring <robh+dt@kernel.org>,
Maxime Ripard <mripard@kernel.org>, Chen-Yu Tsai <wens@csie.org>,
Jernej Skrabec <jernej.skrabec@gmail.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-sunxi@lists.linux.dev, linux-watchdog@vger.kernel.org,
linux-kernel@vger.kernel.org,
Samuel Holland <samuel@sholland.org>
Subject: [PATCH 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329
Date: Sun, 25 Jul 2021 22:51:41 -0500 [thread overview]
Message-ID: <20210726035143.53132-1-samuel@sholland.org> (raw)
On existing SoCs, the watchdog has a single clock input: HOSC (OSC24M)
divided by 750. However, starting with R329, LOSC (OSC32k) is added as
an alternative clock source, with a bit to switch between them.
Since 24 MHz / 750 == 32 kHz, not 32.768 kHz, the hardware adjusts the
cycle counts to keep the timeouts independent of the clock source. This
keeps the programming interface backward-compatible.
R329 also adds two new registers, to allow software to immediately drive
the SoC reset signal.
Signed-off-by: Samuel Holland <samuel@sholland.org>
---
.../watchdog/allwinner,sun4i-a10-wdt.yaml | 30 ++++++++++++++++++-
1 file changed, 29 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index 9aa3c313c49f..853ceb1b7c0f 100644
--- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -24,6 +24,7 @@ properties:
- allwinner,sun50i-a100-wdt
- allwinner,sun50i-h6-wdt
- allwinner,sun50i-h616-wdt
+ - allwinner,sun50i-r329-wdt
- const: allwinner,sun6i-a31-wdt
- items:
- const: allwinner,suniv-f1c100s-wdt
@@ -33,7 +34,16 @@ properties:
maxItems: 1
clocks:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum:
+ - hosc
+ - losc
interrupts:
maxItems: 1
@@ -44,6 +54,24 @@ required:
- clocks
- interrupts
+if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - allwinner,sun50i-r329-wdt
+
+then:
+ properties:
+ clocks:
+ minItems: 2
+
+ clock-names:
+ minItems: 2
+
+ required:
+ - clock-names
+
unevaluatedProperties: false
examples:
--
2.31.1
next reply other threads:[~2021-07-26 3:51 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-07-26 3:51 Samuel Holland [this message]
2021-07-26 3:51 ` [PATCH 2/3] dt-bindings: watchdog: sunxi: Add compatible for D1 Samuel Holland
2021-07-29 4:24 ` Guenter Roeck
2021-07-29 22:39 ` Rob Herring
2021-07-30 1:14 ` Guenter Roeck
2021-07-29 22:40 ` Rob Herring
2021-07-26 3:51 ` [PATCH 3/3] watchdog: sunxi_wdt: Add support " Samuel Holland
2021-07-29 4:11 ` Guenter Roeck
2021-07-29 12:18 ` [PATCH 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329 Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210726035143.53132-1-samuel@sholland.org \
--to=samuel@sholland.org \
--cc=devicetree@vger.kernel.org \
--cc=jernej.skrabec@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sunxi@lists.linux.dev \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mripard@kernel.org \
--cc=robh+dt@kernel.org \
--cc=wens@csie.org \
--cc=wim@linux-watchdog.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).