linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 00/12] Add basic SoC support for mediatek mt7986
@ 2021-07-26  7:14 Sam Shih
  2021-07-26  7:14 ` [PATCH 01/12] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC Sam Shih
                   ` (11 more replies)
  0 siblings, 12 replies; 26+ messages in thread
From: Sam Shih @ 2021-07-26  7:14 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

This patch adds basic SoC support for Mediatek's new 4-core SoC,
MT7986, which is mainly for wifi-router application.

Sam Shih (12):
  dt-bindings: clock: mediatek: document clk bindings for mediatek
    mt7986 SoC
  clk: mediatek: add mt7986 clock IDs
  clk: mediatek: add mt7986 clock support
  pinctrl: mediatek: moore: use pin number in mtk_pin_desc instead of
    array index
  dt-bindings: pinctrl: update bindings for MT7986 SoC
  pinctrl: mediatek: add support for MT7986 SoC
  dt-bindings: arm64: dts: mediatek: Add mt7986 series
  dt-bindings: rng: mediatek: add mt7986 to mtk rng binding
  dt-bindings: serial: Add compatible for Mediatek MT7986
  dt-bindings: watchdog: Add compatible for Mediatek MT7986
  arm64: dts: mediatek: add mt7986a support
  arm64: dts: mediatek: add mt7986b support

 .../devicetree/bindings/arm/mediatek.yaml     |    8 +
 .../arm/mediatek/mediatek,apmixedsys.txt      |    1 +
 .../bindings/arm/mediatek/mediatek,ethsys.txt |    1 +
 .../arm/mediatek/mediatek,infracfg.txt        |    2 +
 .../arm/mediatek/mediatek,sgmiisys.txt        |    2 +
 .../arm/mediatek/mediatek,topckgen.txt        |    1 +
 .../bindings/pinctrl/pinctrl-mt7622.txt       |  284 +++
 .../devicetree/bindings/rng/mtk-rng.yaml      |    1 +
 .../devicetree/bindings/serial/mtk-uart.txt   |    1 +
 .../devicetree/bindings/watchdog/mtk-wdt.txt  |    1 +
 arch/arm64/boot/dts/mediatek/Makefile         |    2 +
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts  |   49 +
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi     |  235 +++
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts  |   21 +
 arch/arm64/boot/dts/mediatek/mt7986b.dtsi     |  235 +++
 drivers/clk/mediatek/Kconfig                  |   17 +
 drivers/clk/mediatek/Makefile                 |    2 +
 drivers/clk/mediatek/clk-mt7986-eth.c         |  132 ++
 drivers/clk/mediatek/clk-mt7986.c             |  610 ++++++
 drivers/pinctrl/mediatek/Kconfig              |    7 +
 drivers/pinctrl/mediatek/Makefile             |    1 +
 drivers/pinctrl/mediatek/pinctrl-moore.c      |   61 +
 drivers/pinctrl/mediatek/pinctrl-mt7986.c     | 1640 +++++++++++++++++
 include/dt-bindings/clock/mt7986-clk.h        |  244 +++
 24 files changed, 3558 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b.dtsi
 create mode 100644 drivers/clk/mediatek/clk-mt7986-eth.c
 create mode 100644 drivers/clk/mediatek/clk-mt7986.c
 create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7986.c
 create mode 100644 include/dt-bindings/clock/mt7986-clk.h

-- 
2.29.2


^ permalink raw reply	[flat|nested] 26+ messages in thread

* [PATCH 01/12] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
  2021-07-26  7:14 [PATCH 00/12] Add basic SoC support for mediatek mt7986 Sam Shih
@ 2021-07-26  7:14 ` Sam Shih
  2021-07-26  9:20   ` Chen-Yu Tsai
  2021-07-26  7:14 ` [PATCH 02/12] clk: mediatek: add mt7986 clock IDs Sam Shih
                   ` (10 subsequent siblings)
  11 siblings, 1 reply; 26+ messages in thread
From: Sam Shih @ 2021-07-26  7:14 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

This patch adds the binding documentation for topckgen, apmixedsys,
infracfg, infracfg_ao, and ethernet subsystem clocks.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 .../devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt    | 1 +
 .../devicetree/bindings/arm/mediatek/mediatek,ethsys.txt        | 1 +
 .../devicetree/bindings/arm/mediatek/mediatek,infracfg.txt      | 2 ++
 .../devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt      | 2 ++
 .../devicetree/bindings/arm/mediatek/mediatek,topckgen.txt      | 1 +
 5 files changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
index ea827e8763de..3fa755866528 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
@@ -14,6 +14,7 @@ Required Properties:
 	- "mediatek,mt7622-apmixedsys"
 	- "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
 	- "mediatek,mt7629-apmixedsys"
+	- "mediatek,mt7986-apmixedsys"
 	- "mediatek,mt8135-apmixedsys"
 	- "mediatek,mt8167-apmixedsys", "syscon"
 	- "mediatek,mt8173-apmixedsys"
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
index 6b7e8067e7aa..0502db73686b 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
@@ -10,6 +10,7 @@ Required Properties:
 	- "mediatek,mt7622-ethsys", "syscon"
 	- "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
 	- "mediatek,mt7629-ethsys", "syscon"
+	- "mediatek,mt7986-ethsys", "syscon"
 - #clock-cells: Must be 1
 - #reset-cells: Must be 1
 
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
index eb3523c7a7be..5f68c30162bf 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
@@ -15,6 +15,8 @@ Required Properties:
 	- "mediatek,mt7622-infracfg", "syscon"
 	- "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
 	- "mediatek,mt7629-infracfg", "syscon"
+	- "mediatek,mt7986-infracfg", "syscon"
+	- "mediatek,mt7986-infracfg_ao", "syscon"
 	- "mediatek,mt8135-infracfg", "syscon"
 	- "mediatek,mt8167-infracfg", "syscon"
 	- "mediatek,mt8173-infracfg", "syscon"
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
index 30cb645c0e54..0e1184392941 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
@@ -8,6 +8,8 @@ Required Properties:
 - compatible: Should be:
 	- "mediatek,mt7622-sgmiisys", "syscon"
 	- "mediatek,mt7629-sgmiisys", "syscon"
+	- "mediatek,mt7986-sgmiisys", "mediatek,mt7986-sgmiisys_0", "syscon"
+	- "mediatek,mt7986-sgmiisys", "mediatek,mt7986-sgmiisys_1", "syscon"
 - #clock-cells: Must be 1
 
 The SGMIISYS controller uses the common clk binding from
diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
index 5ce7578cf274..b82422bb717f 100644
--- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
+++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
@@ -14,6 +14,7 @@ Required Properties:
 	- "mediatek,mt7622-topckgen"
 	- "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
 	- "mediatek,mt7629-topckgen"
+	- "mediatek,mt7986-topckgen", "syscon"
 	- "mediatek,mt8135-topckgen"
 	- "mediatek,mt8167-topckgen", "syscon"
 	- "mediatek,mt8173-topckgen"
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH 02/12] clk: mediatek: add mt7986 clock IDs
  2021-07-26  7:14 [PATCH 00/12] Add basic SoC support for mediatek mt7986 Sam Shih
  2021-07-26  7:14 ` [PATCH 01/12] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC Sam Shih
@ 2021-07-26  7:14 ` Sam Shih
  2021-07-29 22:48   ` Rob Herring
  2021-07-26  7:14 ` [PATCH 03/12] clk: mediatek: add mt7986 clock support Sam Shih
                   ` (9 subsequent siblings)
  11 siblings, 1 reply; 26+ messages in thread
From: Sam Shih @ 2021-07-26  7:14 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

Add MT7986 clock dt-bindings, include topckgen, apmixedsys,
infracfg, infracfg_ao, and ethernet subsystem clocks.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 include/dt-bindings/clock/mt7986-clk.h | 244 +++++++++++++++++++++++++
 1 file changed, 244 insertions(+)
 create mode 100644 include/dt-bindings/clock/mt7986-clk.h

diff --git a/include/dt-bindings/clock/mt7986-clk.h b/include/dt-bindings/clock/mt7986-clk.h
new file mode 100644
index 000000000000..dd11d0a717bc
--- /dev/null
+++ b/include/dt-bindings/clock/mt7986-clk.h
@@ -0,0 +1,244 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_CLK_MT7986_H
+#define _DT_BINDINGS_CLK_MT7986_H
+
+/* INFRACFG */
+
+#define CK_INFRA_CK_F26M		0
+#define CK_INFRA_UART			1
+#define CK_INFRA_ISPI0			2
+#define CK_INFRA_I2C			3
+#define CK_INFRA_ISPI1			4
+#define CK_INFRA_PWM			5
+#define CK_INFRA_66M_MCK		6
+#define CK_INFRA_CK_F32K		7
+#define CK_INFRA_PCIE_CK		8
+#define CK_INFRA_PWM_BCK		9
+#define CK_INFRA_PWM_CK1		10
+#define CK_INFRA_PWM_CK2		11
+#define CK_INFRA_133M_HCK		12
+#define CK_INFRA_EIP_CK			13
+#define CK_INFRA_66M_PHCK		14
+#define CK_INFRA_FAUD_L_CK		15
+#define CK_INFRA_FAUD_AUD_CK		16
+#define CK_INFRA_FAUD_EG2_CK		17
+#define CK_INFRA_I2CS_CK		18
+#define CK_INFRA_MUX_UART0		19
+#define CK_INFRA_MUX_UART1		20
+#define CK_INFRA_MUX_UART2		21
+#define CK_INFRA_NFI_CK			22
+#define CK_INFRA_SPINFI_CK		23
+#define CK_INFRA_MUX_SPI0		24
+#define CK_INFRA_MUX_SPI1		25
+#define CK_INFRA_RTC_32K		26
+#define CK_INFRA_FMSDC_CK		27
+#define CK_INFRA_FMSDC_HCK_CK		28
+#define CK_INFRA_PERI_133M		29
+#define CK_INFRA_133M_PHCK		30
+#define CK_INFRA_USB_SYS_CK		31
+#define CK_INFRA_USB_CK			32
+#define CK_INFRA_USB_XHCI_CK		33
+#define CK_INFRA_PCIE_GFMUX_TL_O_PRE	34
+#define CK_INFRA_F26M_CK0		35
+#define CK_INFRA_HD_133M	        36
+#define CLK_INFRA_NR_CLK		37
+
+/* TOPCKGEN */
+
+#define CK_TOP_CB_CKSQ_40M		0
+#define CK_TOP_CB_M_416M		1
+#define CK_TOP_CB_M_D2			2
+#define CK_TOP_CB_M_D4			3
+#define CK_TOP_CB_M_D8			4
+#define CK_TOP_M_D8_D2			5
+#define CK_TOP_M_D3_D2			6
+#define CK_TOP_CB_MM_D2			7
+#define CK_TOP_CB_MM_D4			8
+#define CK_TOP_CB_MM_D8			9
+#define CK_TOP_MM_D8_D2			10
+#define CK_TOP_MM_D3_D8			11
+#define CK_TOP_CB_U2_PHYD_CK		12
+#define CK_TOP_CB_APLL2_196M		13
+#define CK_TOP_APLL2_D4			14
+#define CK_TOP_CB_NET1_D4		15
+#define CK_TOP_CB_NET1_D5		16
+#define CK_TOP_NET1_D5_D2		17
+#define CK_TOP_NET1_D5_D4		18
+#define CK_TOP_NET1_D8_D2		19
+#define CK_TOP_NET1_D8_D4		20
+#define CK_TOP_CB_NET2_800M		21
+#define CK_TOP_CB_NET2_D4		22
+#define CK_TOP_NET2_D4_D2		23
+#define CK_TOP_NET2_D3_D2		24
+#define CK_TOP_CB_WEDMCU_760M		25
+#define CK_TOP_WEDMCU_D5_D2		26
+#define CK_TOP_CB_SGM_325M		27
+#define CK_TOP_CB_CKSQ_40M_D2		28
+#define CK_TOP_CB_RTC_32K		29
+#define CK_TOP_CB_RTC_32P7K		30
+#define CK_TOP_NFI1X			31
+#define CK_TOP_USB_EQ_RX250M		32
+#define CK_TOP_USB_TX250M		33
+#define CK_TOP_USB_LN0_CK		34
+#define CK_TOP_USB_CDR_CK		35
+#define CK_TOP_SPINFI_BCK		36
+#define CK_TOP_I2C_BCK			37
+#define CK_TOP_PEXTP_TL			38
+#define CK_TOP_EMMC_250M		39
+#define CK_TOP_EMMC_416M		40
+#define CK_TOP_F_26M_ADC_CK		41
+#define CK_TOP_SYSAXI			42
+#define CK_TOP_NETSYS_WED_MCU		43
+#define CK_TOP_NETSYS_2X		44
+#define CK_TOP_SGM_325M			45
+#define CK_TOP_A1SYS			46
+#define CK_TOP_EIP_B			47
+#define CK_TOP_F26M			48
+#define CK_TOP_AUD_L			49
+#define CK_TOP_A_TUNER			50
+#define CK_TOP_U2U3_REF			51
+#define CK_TOP_U2U3_SYS			52
+#define CK_TOP_U2U3_XHCI		53
+#define CK_TOP_AP2CNN_HOST		54
+#define CK_TOP_NFI1X_SEL		55
+#define CK_TOP_SPINFI_SEL		56
+#define CK_TOP_SPI_SEL			57
+#define CK_TOP_SPIM_MST_SEL		58
+#define CK_TOP_UART_SEL			59
+#define CK_TOP_PWM_SEL			60
+#define CK_TOP_I2C_SEL			61
+#define CK_TOP_PEXTP_TL_SEL		62
+#define CK_TOP_EMMC_250M_SEL		63
+#define CK_TOP_EMMC_416M_SEL		64
+#define CK_TOP_F_26M_ADC_SEL		65
+#define CK_TOP_DRAMC_SEL		66
+#define CK_TOP_DRAMC_MD32_SEL		67
+#define CK_TOP_SYSAXI_SEL		68
+#define CK_TOP_SYSAPB_SEL		69
+#define CK_TOP_ARM_DB_MAIN_SEL		70
+#define CK_TOP_ARM_DB_JTSEL		71
+#define CK_TOP_NETSYS_SEL		72
+#define CK_TOP_NETSYS_500M_SEL		73
+#define CK_TOP_NETSYS_MCU_SEL		74
+#define CK_TOP_NETSYS_2X_SEL		75
+#define CK_TOP_SGM_325M_SEL		76
+#define CK_TOP_SGM_REG_SEL		77
+#define CK_TOP_A1SYS_SEL		78
+#define CK_TOP_CONN_MCUSYS_SEL		79
+#define CK_TOP_EIP_B_SEL		80
+#define CK_TOP_PCIE_PHY_SEL		81
+#define CK_TOP_USB3_PHY_SEL		82
+#define CK_TOP_F26M_SEL			83
+#define CK_TOP_AUD_L_SEL		84
+#define CK_TOP_A_TUNER_SEL		85
+#define CK_TOP_U2U3_SEL			86
+#define CK_TOP_U2U3_SYS_SEL		87
+#define CK_TOP_U2U3_XHCI_SEL		88
+#define CK_TOP_DA_U2_REFSEL		89
+#define CK_TOP_DA_U2_CK_1P_SEL		90
+#define CK_TOP_AP2CNN_HOST_SEL		91
+#define CLK_TOP_NR_CLK			92
+
+/* INFRACFG_AO */
+
+#define CK_INFRA_UART0_SEL		0
+#define CK_INFRA_UART1_SEL		1
+#define CK_INFRA_UART2_SEL		2
+#define CK_INFRA_SPI0_SEL		3
+#define CK_INFRA_SPI1_SEL		4
+#define CK_INFRA_PWM1_SEL		5
+#define CK_INFRA_PWM2_SEL		6
+#define CK_INFRA_PWM_BSEL		7
+#define CK_INFRA_PCIE_SEL		8
+#define CK_INFRA_GPT_STA		9
+#define CK_INFRA_PWM_HCK		10
+#define CK_INFRA_PWM_STA		11
+#define CK_INFRA_PWM1_CK		12
+#define CK_INFRA_PWM2_CK		13
+#define CK_INFRA_CQ_DMA_CK		14
+#define CK_INFRA_EIP97_CK		15
+#define CK_INFRA_AUD_BUS_CK		16
+#define CK_INFRA_AUD_26M_CK		17
+#define CK_INFRA_AUD_L_CK		18
+#define CK_INFRA_AUD_AUD_CK		19
+#define CK_INFRA_AUD_EG2_CK		20
+#define CK_INFRA_DRAMC_26M_CK		21
+#define CK_INFRA_DBG_CK			22
+#define CK_INFRA_AP_DMA_CK		23
+#define CK_INFRA_SEJ_CK			24
+#define CK_INFRA_SEJ_13M_CK		25
+#define CK_INFRA_THERM_CK		26
+#define CK_INFRA_I2CO_CK		27
+#define CK_INFRA_UART0_CK		28
+#define CK_INFRA_UART1_CK		29
+#define CK_INFRA_UART2_CK		30
+#define CK_INFRA_NFI1_CK		31
+#define CK_INFRA_SPINFI1_CK		32
+#define CK_INFRA_NFI_HCK_CK		33
+#define CK_INFRA_SPI0_CK		34
+#define CK_INFRA_SPI1_CK		35
+#define CK_INFRA_SPI0_HCK_CK		36
+#define CK_INFRA_SPI1_HCK_CK		37
+#define CK_INFRA_FRTC_CK		38
+#define CK_INFRA_MSDC_CK		39
+#define CK_INFRA_MSDC_HCK_CK		40
+#define CK_INFRA_MSDC_133M_CK		41
+#define CK_INFRA_MSDC_66M_CK		42
+#define CK_INFRA_ADC_26M_CK		43
+#define CK_INFRA_ADC_FRC_CK		44
+#define CK_INFRA_FBIST2FPC_CK		45
+#define CK_INFRA_IUSB_133_CK		46
+#define CK_INFRA_IUSB_66M_CK		47
+#define CK_INFRA_IUSB_SYS_CK		48
+#define CK_INFRA_IUSB_CK		49
+#define CK_INFRA_IPCIE_CK		50
+#define CK_INFRA_IPCIE_PIPE_CK  51
+#define CK_INFRA_IPCIER_CK		52
+#define CK_INFRA_IPCIEB_CK		53
+#define CK_INFRA_TRNG_CK		54
+#define CLK_INFRA_AO_NR_CLK		55
+
+/* APMIXEDSYS */
+
+#define CK_APMIXED_ARMPLL		0
+#define CK_APMIXED_NET2PLL		1
+#define CK_APMIXED_MMPLL		2
+#define CK_APMIXED_SGMPLL		3
+#define CK_APMIXED_WEDMCUPLL		4
+#define CK_APMIXED_NET1PLL		5
+#define CK_APMIXED_MPLL			6
+#define CK_APMIXED_APLL2		7
+#define CLK_APMIXED_NR_CLK		8
+
+/* SGMIISYS_0 */
+
+#define CK_SGM0_TX_EN			0
+#define CK_SGM0_RX_EN			1
+#define CK_SGM0_CK0_EN			2
+#define CK_SGM0_CDR_CK0_EN		3
+#define CLK_SGMII0_NR_CLK		4
+
+/* SGMIISYS_1 */
+
+#define CK_SGM1_TX_EN			0
+#define CK_SGM1_RX_EN			1
+#define CK_SGM1_CK1_EN			2
+#define CK_SGM1_CDR_CK1_EN		3
+#define CLK_SGMII1_NR_CLK		4
+
+/* ETHSYS */
+
+#define CK_ETH_FE_EN			0
+#define CK_ETH_GP2_EN			1
+#define CK_ETH_GP1_EN			2
+#define CK_ETH_WOCPU1_EN		3
+#define CK_ETH_WOCPU0_EN		4
+#define CLK_ETH_NR_CLK			5
+
+#endif /* _DT_BINDINGS_CLK_MT7986_H */
+
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH 03/12] clk: mediatek: add mt7986 clock support
  2021-07-26  7:14 [PATCH 00/12] Add basic SoC support for mediatek mt7986 Sam Shih
  2021-07-26  7:14 ` [PATCH 01/12] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC Sam Shih
  2021-07-26  7:14 ` [PATCH 02/12] clk: mediatek: add mt7986 clock IDs Sam Shih
@ 2021-07-26  7:14 ` Sam Shih
  2021-07-26  7:14 ` [PATCH 04/12] pinctrl: mediatek: moore: use pin number in mtk_pin_desc instead of array index Sam Shih
                   ` (8 subsequent siblings)
  11 siblings, 0 replies; 26+ messages in thread
From: Sam Shih @ 2021-07-26  7:14 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

Add MT7986 clock support, include topckgen, apmixedsys,
infracfg, infracfg_ao, and ethernet subsystem clocks.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 drivers/clk/mediatek/Kconfig          |  17 +
 drivers/clk/mediatek/Makefile         |   2 +
 drivers/clk/mediatek/clk-mt7986-eth.c | 132 ++++++
 drivers/clk/mediatek/clk-mt7986.c     | 610 ++++++++++++++++++++++++++
 4 files changed, 761 insertions(+)
 create mode 100644 drivers/clk/mediatek/clk-mt7986-eth.c
 create mode 100644 drivers/clk/mediatek/clk-mt7986.c

diff --git a/drivers/clk/mediatek/Kconfig b/drivers/clk/mediatek/Kconfig
index 886e2d9fced5..28d8a07d5139 100644
--- a/drivers/clk/mediatek/Kconfig
+++ b/drivers/clk/mediatek/Kconfig
@@ -344,6 +344,23 @@ config COMMON_CLK_MT7629_HIFSYS
 	  This driver supports MediaTek MT7629 HIFSYS clocks providing
 	  to PCI-E and USB.
 
+config COMMON_CLK_MT7986
+	bool "Clock driver for MediaTek MT7986"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	select COMMON_CLK_MEDIATEK
+	default ARCH_MEDIATEK
+	help
+	  This driver supports MediaTek MT7986 basic clocks and clocks
+	  required for various periperals found on MediaTek.
+
+config COMMON_CLK_MT7986_ETHSYS
+	bool "Clock driver for MediaTek MT7986 ETHSYS"
+	depends on COMMON_CLK_MT7986
+	default COMMON_CLK_MT7986
+	help
+	  This driver add support for clocks for Ethernet and SGMII
+	  required on MediaTek MT7986 SoC.
+
 config COMMON_CLK_MT8135
 	bool "Clock driver for MediaTek MT8135"
 	depends on (ARCH_MEDIATEK && ARM) || COMPILE_TEST
diff --git a/drivers/clk/mediatek/Makefile b/drivers/clk/mediatek/Makefile
index 3b0c2be73824..c513548a2518 100644
--- a/drivers/clk/mediatek/Makefile
+++ b/drivers/clk/mediatek/Makefile
@@ -46,6 +46,8 @@ obj-$(CONFIG_COMMON_CLK_MT7622_AUDSYS) += clk-mt7622-aud.o
 obj-$(CONFIG_COMMON_CLK_MT7629) += clk-mt7629.o
 obj-$(CONFIG_COMMON_CLK_MT7629_ETHSYS) += clk-mt7629-eth.o
 obj-$(CONFIG_COMMON_CLK_MT7629_HIFSYS) += clk-mt7629-hif.o
+obj-$(CONFIG_COMMON_CLK_MT7986) += clk-mt7986.o
+obj-$(CONFIG_COMMON_CLK_MT7986_ETHSYS) += clk-mt7986-eth.o
 obj-$(CONFIG_COMMON_CLK_MT8135) += clk-mt8135.o
 obj-$(CONFIG_COMMON_CLK_MT8167) += clk-mt8167.o
 obj-$(CONFIG_COMMON_CLK_MT8167_AUDSYS) += clk-mt8167-aud.o
diff --git a/drivers/clk/mediatek/clk-mt7986-eth.c b/drivers/clk/mediatek/clk-mt7986-eth.c
new file mode 100644
index 000000000000..b8f16fb7eea5
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt7986-eth.c
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
+ *         Sam Shih <sam.shih@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+
+#include "clk-mtk.h"
+#include "clk-gate.h"
+
+#include <dt-bindings/clock/mt7986-clk.h>
+
+static const struct mtk_gate_regs sgmii0_cg_regs = {
+	.set_ofs = 0xe4,
+	.clr_ofs = 0xe4,
+	.sta_ofs = 0xe4,
+};
+
+#define GATE_SGMII0(_id, _name, _parent, _shift)                               \
+	{                                                                      \
+		.id = _id, .name = _name, .parent_name = _parent,              \
+		.regs = &sgmii0_cg_regs, .shift = _shift,                      \
+		.ops = &mtk_clk_gate_ops_no_setclr_inv,                        \
+	}
+
+static const struct mtk_gate sgmii0_clks[] __initconst = {
+	GATE_SGMII0(CK_SGM0_TX_EN, "sgm0_tx_en", "usb_tx250m", 2),
+	GATE_SGMII0(CK_SGM0_RX_EN, "sgm0_rx_en", "usb_eq_rx250m", 3),
+	GATE_SGMII0(CK_SGM0_CK0_EN, "sgm0_ck0_en", "usb_ln0", 4),
+	GATE_SGMII0(CK_SGM0_CDR_CK0_EN, "sgm0_cdr_ck0_en", "usb_cdr", 5),
+};
+
+static const struct mtk_gate_regs sgmii1_cg_regs = {
+	.set_ofs = 0xe4,
+	.clr_ofs = 0xe4,
+	.sta_ofs = 0xe4,
+};
+
+#define GATE_SGMII1(_id, _name, _parent, _shift)                               \
+	{                                                                      \
+		.id = _id, .name = _name, .parent_name = _parent,              \
+		.regs = &sgmii1_cg_regs, .shift = _shift,                      \
+		.ops = &mtk_clk_gate_ops_no_setclr_inv,                        \
+	}
+
+static const struct mtk_gate sgmii1_clks[] __initconst = {
+	GATE_SGMII1(CK_SGM1_TX_EN, "sgm1_tx_en", "usb_tx250m", 2),
+	GATE_SGMII1(CK_SGM1_RX_EN, "sgm1_rx_en", "usb_eq_rx250m", 3),
+	GATE_SGMII1(CK_SGM1_CK1_EN, "sgm1_ck1_en", "usb_ln0", 4),
+	GATE_SGMII1(CK_SGM1_CDR_CK1_EN, "sgm1_cdr_ck1_en", "usb_cdr", 5),
+};
+
+static const struct mtk_gate_regs eth_cg_regs = {
+	.set_ofs = 0x30,
+	.clr_ofs = 0x30,
+	.sta_ofs = 0x30,
+};
+
+#define GATE_ETH(_id, _name, _parent, _shift)                                  \
+	{                                                                      \
+		.id = _id, .name = _name, .parent_name = _parent,              \
+		.regs = &eth_cg_regs, .shift = _shift,                         \
+		.ops = &mtk_clk_gate_ops_no_setclr_inv,                        \
+	}
+
+static const struct mtk_gate eth_clks[] __initconst = {
+	GATE_ETH(CK_ETH_FE_EN, "eth_fe_en", "netsys_2x", 6),
+	GATE_ETH(CK_ETH_GP2_EN, "eth_gp2_en", "sgm_325m", 7),
+	GATE_ETH(CK_ETH_GP1_EN, "eth_gp1_en", "sgm_325m", 8),
+	GATE_ETH(CK_ETH_WOCPU1_EN, "eth_wocpu1_en", "netsys_wed_mcu", 14),
+	GATE_ETH(CK_ETH_WOCPU0_EN, "eth_wocpu0_en", "netsys_wed_mcu", 15),
+};
+
+static void __init mtk_sgmiisys_0_init(struct device_node *node)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+
+	clk_data = mtk_alloc_clk_data(CLK_SGMII0_NR_CLK);
+
+	mtk_clk_register_gates(node, sgmii0_clks, ARRAY_SIZE(sgmii0_clks),
+			       clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+}
+CLK_OF_DECLARE(mtk_sgmiisys_0, "mediatek,mt7986-sgmiisys_0",
+	       mtk_sgmiisys_0_init);
+
+static void __init mtk_sgmiisys_1_init(struct device_node *node)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+
+	clk_data = mtk_alloc_clk_data(CLK_SGMII1_NR_CLK);
+
+	mtk_clk_register_gates(node, sgmii1_clks, ARRAY_SIZE(sgmii1_clks),
+			       clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+}
+CLK_OF_DECLARE(mtk_sgmiisys_1, "mediatek,mt7986-sgmiisys_1",
+	       mtk_sgmiisys_1_init);
+
+static void __init mtk_ethsys_init(struct device_node *node)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+
+	clk_data = mtk_alloc_clk_data(CLK_ETH_NR_CLK);
+
+	mtk_clk_register_gates(node, eth_clks, ARRAY_SIZE(eth_clks), clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+}
+CLK_OF_DECLARE(mtk_ethsys, "mediatek,mt7986-ethsys_ck", mtk_ethsys_init);
diff --git a/drivers/clk/mediatek/clk-mt7986.c b/drivers/clk/mediatek/clk-mt7986.c
new file mode 100644
index 000000000000..c8f2a4d7ac1c
--- /dev/null
+++ b/drivers/clk/mediatek/clk-mt7986.c
@@ -0,0 +1,610 @@
+// SPDX-License-Identifier: GPL-1.0
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Wenzhen Yu <wenzhen.yu@mediatek.com>
+ *         Sam Shih <sam.shih@mediatek.com>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include "clk-mtk.h"
+#include "clk-gate.h"
+#include "clk-mux.h"
+
+#include <dt-bindings/clock/mt7986-clk.h>
+#include <linux/clk.h>
+
+#define MT7986_PLL_FMAX (2500UL * MHZ)
+#define CON0_MT7986_RST_BAR BIT(27)
+
+#define PLL_xtal(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits,       \
+		 _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift,         \
+		 _div_table, _parent_name)                                     \
+	{                                                                      \
+		.id = _id, .name = _name, .reg = _reg, .pwr_reg = _pwr_reg,    \
+		.en_mask = _en_mask, .flags = _flags,                          \
+		.rst_bar_mask = CON0_MT7986_RST_BAR, .fmax = MT7986_PLL_FMAX,  \
+		.pcwbits = _pcwbits, .pd_reg = _pd_reg, .pd_shift = _pd_shift, \
+		.tuner_reg = _tuner_reg, .pcw_reg = _pcw_reg,                  \
+		.pcw_shift = _pcw_shift, .div_table = _div_table,              \
+		.parent_name = _parent_name,                                   \
+	}
+
+#define PLL(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits, _pd_reg,   \
+	    _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift)                       \
+	PLL_xtal(_id, _name, _reg, _pwr_reg, _en_mask, _flags, _pcwbits,       \
+		 _pd_reg, _pd_shift, _tuner_reg, _pcw_reg, _pcw_shift, NULL,   \
+		 "clkxtal")
+
+static DEFINE_SPINLOCK(mt7986_clk_lock);
+
+static const struct mtk_fixed_factor infra_divs[] __initconst = {
+	FACTOR(CK_INFRA_CK_F26M, "infra_ck_f26m", "csw_f26m_sel", 1, 1),
+	FACTOR(CK_INFRA_UART, "infra_uart", "uart_sel", 1, 1),
+	FACTOR(CK_INFRA_ISPI0, "infra_ispi0", "spi_sel", 1, 1),
+	FACTOR(CK_INFRA_I2C, "infra_i2c", "i2c_sel", 1, 1),
+	FACTOR(CK_INFRA_ISPI1, "infra_ispi1", "spim_mst_sel", 1, 1),
+	FACTOR(CK_INFRA_ISPI1, "infra_ispi1", "spinfi_sel", 1, 1),
+	FACTOR(CK_INFRA_PWM, "infra_pwm", "pwm_sel", 1, 1),
+	FACTOR(CK_INFRA_66M_MCK, "infra_66m_mck", "sysaxi_sel", 1, 2),
+	FACTOR(CK_INFRA_CK_F32K, "infra_ck_f32k", "cb_rtc_32p7k", 1, 1),
+	FACTOR(CK_INFRA_PCIE_CK, "infra_pcie", "pextp_tl_ck_sel", 1, 1),
+	FACTOR(CK_INFRA_PWM_BCK, "infra_pwm_bck", "infra_pwm_bsel", 1, 1),
+	FACTOR(CK_INFRA_PWM_CK1, "infra_pwm_ck1", "infra_pwm1_sel", 1, 1),
+	FACTOR(CK_INFRA_PWM_CK2, "infra_pwm_ck2", "infra_pwm2_sel", 1, 1),
+	FACTOR(CK_INFRA_133M_HCK, "infra_133m_hck", "sysaxi", 1, 1),
+	FACTOR(CK_INFRA_EIP_CK, "infra_eip", "eip_b", 1, 1),
+	FACTOR(CK_INFRA_66M_PHCK, "infra_66m_phck", "infra_133m_hck", 1, 1),
+	FACTOR(CK_INFRA_FAUD_L_CK, "infra_faud_l", "aud_l", 1, 1),
+	FACTOR(CK_INFRA_FAUD_AUD_CK, "infra_faud_aud", "a1sys", 1, 1),
+	FACTOR(CK_INFRA_FAUD_EG2_CK, "infra_faud_eg2", "a_tuner", 1, 1),
+	FACTOR(CK_INFRA_I2CS_CK, "infra_i2cs", "i2c_bck", 1, 1),
+	FACTOR(CK_INFRA_MUX_UART0, "infra_mux_uart0", "infra_uart0_sel", 1, 1),
+	FACTOR(CK_INFRA_MUX_UART1, "infra_mux_uart1", "infra_uart1_sel", 1, 1),
+	FACTOR(CK_INFRA_MUX_UART2, "infra_mux_uart2", "infra_uart2_sel", 1, 1),
+	FACTOR(CK_INFRA_NFI_CK, "infra_nfi", "nfi1x", 1, 1),
+	FACTOR(CK_INFRA_SPINFI_CK, "infra_spinfi", "spinfi_bck", 1, 1),
+	FACTOR(CK_INFRA_MUX_SPI0, "infra_mux_spi0", "infra_spi0_sel", 1, 1),
+	FACTOR(CK_INFRA_MUX_SPI1, "infra_mux_spi1", "infra_spi1_sel", 1, 1),
+	FACTOR(CK_INFRA_RTC_32K, "infra_rtc_32k", "cb_rtc_32k", 1, 1),
+	FACTOR(CK_INFRA_FMSDC_CK, "infra_fmsdc", "emmc_416m", 1, 1),
+	FACTOR(CK_INFRA_FMSDC_HCK_CK, "infra_fmsdc_hck", "emmc_250m", 1, 1),
+	FACTOR(CK_INFRA_PERI_133M, "infra_peri_133m", "sysaxi", 1, 1),
+	FACTOR(CK_INFRA_133M_PHCK, "infra_133m_phck", "sysaxi", 1, 1),
+	FACTOR(CK_INFRA_USB_SYS_CK, "infra_usb_sys", "u2u3_sys", 1, 1),
+	FACTOR(CK_INFRA_USB_CK, "infra_usb", "u2u3_ref", 1, 1),
+	FACTOR(CK_INFRA_USB_XHCI_CK, "infra_usb_xhci", "u2u3_xhci", 1, 1),
+	FACTOR(CK_INFRA_PCIE_GFMUX_TL_O_PRE, "infra_pcie_mux", "pextp_tl", 1,
+	       1),
+	FACTOR(CK_INFRA_F26M_CK0, "infra_f26m_ck0", "csw_f26m", 1, 1),
+	FACTOR(CK_INFRA_HD_133M, "infra_hd_133m", "sysaxi", 1, 1),
+};
+
+static const struct mtk_fixed_factor top_divs[] __initconst = {
+	FACTOR(CK_TOP_CB_CKSQ_40M, "cb_cksq_40m", "clkxtal", 1, 1),
+	FACTOR(CK_TOP_CB_M_416M, "cb_m_416m", "mpll", 1, 1),
+	FACTOR(CK_TOP_CB_M_D2, "cb_m_d2", "mpll", 1, 2),
+	FACTOR(CK_TOP_CB_M_D4, "cb_m_d4", "mpll", 1, 4),
+	FACTOR(CK_TOP_CB_M_D8, "cb_m_d8", "mpll", 1, 8),
+	FACTOR(CK_TOP_M_D8_D2, "m_d8_d2", "mpll", 1, 16),
+	FACTOR(CK_TOP_M_D3_D2, "m_d3_d2", "mpll", 1, 2),
+	FACTOR(CK_TOP_CB_MM_D2, "cb_mm_d2", "mmpll", 1, 2),
+	FACTOR(CK_TOP_CB_MM_D4, "cb_mm_d4", "mmpll", 1, 4),
+	FACTOR(CK_TOP_CB_MM_D8, "cb_mm_d8", "mmpll", 1, 8),
+	FACTOR(CK_TOP_MM_D8_D2, "mm_d8_d2", "mmpll", 1, 16),
+	FACTOR(CK_TOP_MM_D3_D8, "mm_d3_d8", "mmpll", 1, 8),
+	FACTOR(CK_TOP_CB_U2_PHYD_CK, "cb_u2_phyd", "mmpll", 1, 30),
+	FACTOR(CK_TOP_CB_APLL2_196M, "cb_apll2_196m", "apll2", 1, 1),
+	FACTOR(CK_TOP_APLL2_D4, "apll2_d4", "apll2", 1, 4),
+	FACTOR(CK_TOP_CB_NET1_D4, "cb_net1_d4", "net1pll", 1, 4),
+	FACTOR(CK_TOP_CB_NET1_D5, "cb_net1_d5", "net1pll", 1, 5),
+	FACTOR(CK_TOP_NET1_D5_D2, "net1_d5_d2", "net1pll", 1, 10),
+	FACTOR(CK_TOP_NET1_D5_D4, "net1_d5_d4", "net1pll", 1, 20),
+	FACTOR(CK_TOP_NET1_D8_D2, "net1_d8_d2", "net1pll", 1, 16),
+	FACTOR(CK_TOP_NET1_D8_D4, "net1_d8_d4", "net1pll", 1, 32),
+	FACTOR(CK_TOP_CB_NET2_800M, "cb_net2_800m", "net2pll", 1, 1),
+	FACTOR(CK_TOP_CB_NET2_D4, "cb_net2_d4", "net2pll", 1, 4),
+	FACTOR(CK_TOP_NET2_D4_D2, "net2_d4_d2", "net2pll", 1, 8),
+	FACTOR(CK_TOP_NET2_D3_D2, "net2_d3_d2", "net2pll", 1, 2),
+	FACTOR(CK_TOP_CB_WEDMCU_760M, "cb_wedmcu_760m", "wedmcupll", 1, 1),
+	FACTOR(CK_TOP_WEDMCU_D5_D2, "wedmcu_d5_d2", "wedmcupll", 1, 10),
+	FACTOR(CK_TOP_CB_SGM_325M, "cb_sgm_325m", "sgmpll", 1, 1),
+	FACTOR(CK_TOP_CB_CKSQ_40M_D2, "cb_cksq_40m_d2", "cb_cksq_40m", 1, 2),
+	FACTOR(CK_TOP_CB_RTC_32K, "cb_rtc_32k", "cb_cksq_40m", 1, 1250),
+	FACTOR(CK_TOP_CB_RTC_32P7K, "cb_rtc_32p7k", "cb_cksq_40m", 1, 1220),
+	FACTOR(CK_TOP_NFI1X, "nfi1x", "nfi1x_sel", 1, 1),
+	FACTOR(CK_TOP_USB_EQ_RX250M, "usb_eq_rx250m", "cb_cksq_40m", 1, 1),
+	FACTOR(CK_TOP_USB_TX250M, "usb_tx250m", "cb_cksq_40m", 1, 1),
+	FACTOR(CK_TOP_USB_LN0_CK, "usb_ln0", "cb_cksq_40m", 1, 1),
+	FACTOR(CK_TOP_USB_CDR_CK, "usb_cdr", "cb_cksq_40m", 1, 1),
+	FACTOR(CK_TOP_SPINFI_BCK, "spinfi_bck", "spinfi_sel", 1, 1),
+	FACTOR(CK_TOP_I2C_BCK, "i2c_bck", "i2c_sel", 1, 1),
+	FACTOR(CK_TOP_PEXTP_TL, "pextp_tl", "pextp_tl_ck_sel", 1, 1),
+	FACTOR(CK_TOP_EMMC_250M, "emmc_250m", "emmc_250m_sel", 1, 1),
+	FACTOR(CK_TOP_EMMC_416M, "emmc_416m", "emmc_416m_sel", 1, 1),
+	FACTOR(CK_TOP_F_26M_ADC_CK, "f_26m_adc", "f_26m_adc_sel", 1, 1),
+	FACTOR(CK_TOP_SYSAXI, "sysaxi", "sysaxi_sel", 1, 1),
+	FACTOR(CK_TOP_NETSYS_WED_MCU, "netsys_wed_mcu", "netsys_mcu_sel", 1, 1),
+	FACTOR(CK_TOP_NETSYS_2X, "netsys_2x", "netsys_2x_sel", 1, 1),
+	FACTOR(CK_TOP_SGM_325M, "sgm_325m", "sgm_325m_sel", 1, 1),
+	FACTOR(CK_TOP_A1SYS, "a1sys", "a1sys_sel", 1, 1),
+	FACTOR(CK_TOP_EIP_B, "eip_b", "eip_b_sel", 1, 1),
+	FACTOR(CK_TOP_F26M, "csw_f26m", "csw_f26m_sel", 1, 1),
+	FACTOR(CK_TOP_AUD_L, "aud_l", "aud_l_sel", 1, 1),
+	FACTOR(CK_TOP_A_TUNER, "a_tuner", "a_tuner_sel", 1, 1),
+	FACTOR(CK_TOP_U2U3_REF, "u2u3_ref", "u2u3_sel", 1, 1),
+	FACTOR(CK_TOP_U2U3_SYS, "u2u3_sys", "u2u3_sys_sel", 1, 1),
+	FACTOR(CK_TOP_U2U3_XHCI, "u2u3_xhci", "u2u3_xhci_sel", 1, 1),
+	FACTOR(CK_TOP_AP2CNN_HOST, "ap2cnn_host", "ap2cnn_host_sel", 1, 1),
+};
+
+static const char *const nfi1x_parents[] __initconst = {
+	"cb_cksq_40m", "cb_mm_d8", "net1_d8_d2",   "net2_d3_d2",
+	"cb_m_d4",     "mm_d8_d2", "wedmcu_d5_d2", "cb_m_d8"
+};
+
+static const char *const spinfi_parents[] __initconst = {
+	"cb_cksq_40m_d2", "cb_cksq_40m",  "net1_d5_d4", "cb_m_d4",
+	"mm_d8_d2",       "wedmcu_d5_d2", "mm_d3_d8",   "cb_m_d8"
+};
+
+static const char *const spi_parents[] __initconst = {
+	"cb_cksq_40m", "cb_m_d2",    "cb_mm_d8", "net1_d8_d2",
+	"net2_d3_d2",  "net1_d5_d4", "cb_m_d4",  "wedmcu_d5_d2"
+};
+
+static const char *const uart_parents[] __initconst = { "cb_cksq_40m",
+							"cb_m_d8", "m_d8_d2" };
+
+static const char *const pwm_parents[] __initconst = {
+	"cb_cksq_40m", "net1_d8_d2", "net1_d5_d4", "cb_m_d4"
+};
+
+static const char *const i2c_parents[] __initconst = { "cb_cksq_40m",
+						       "net1_d5_d4", "cb_m_d4",
+						       "net1_d8_d4" };
+
+static const char *const pextp_tl_ck_parents[] __initconst = {
+	"cb_cksq_40m", "net1_d5_d4", "net2_d4_d2", "cb_rtc_32k"
+};
+
+static const char *const emmc_250m_parents[] __initconst = { "cb_cksq_40m",
+							     "net1_d5_d2" };
+
+static const char *const emmc_416m_parents[] __initconst = { "cb_cksq_40m",
+							     "cb_m_416m" };
+
+static const char *const f_26m_adc_parents[] __initconst = { "cb_cksq_40m",
+							     "m_d8_d2" };
+
+static const char *const dramc_md32_parents[] __initconst = { "cb_cksq_40m",
+							      "cb_m_d2" };
+
+static const char *const sysaxi_parents[] __initconst = { "cb_cksq_40m",
+							  "net1_d8_d2",
+							  "cb_net2_d4" };
+
+static const char *const sysapb_parents[] __initconst = { "cb_cksq_40m",
+							  "m_d3_d2",
+							  "net2_d4_d2" };
+
+static const char *const arm_db_main_parents[] __initconst = { "cb_cksq_40m",
+							       "net2_d3_d2" };
+
+static const char *const arm_db_jtsel_parents[] __initconst = { "cb_jtck_50m",
+								"cb_cksq_40m" };
+
+static const char *const netsys_parents[] __initconst = { "cb_cksq_40m",
+							  "cb_mm_d4" };
+
+static const char *const netsys_500m_parents[] __initconst = { "cb_cksq_40m",
+							       "cb_net1_d5" };
+
+static const char *const netsys_mcu_parents[] __initconst = {
+	"cb_cksq_40m", "cb_wedmcu_760m", "cb_mm_d2", "cb_net1_d4", "cb_net1_d5"
+};
+
+static const char *const netsys_2x_parents[] __initconst = {
+	"cb_cksq_40m", "cb_net2_800m", "cb_wedmcu_760m", "cb_mm_d2"
+};
+
+static const char *const sgm_325m_parents[] __initconst = { "cb_cksq_40m",
+							    "cb_sgm_325m" };
+
+static const char *const sgm_reg_parents[] __initconst = { "cb_cksq_40m",
+							   "net1_d8_d4" };
+
+static const char *const a1sys_parents[] __initconst = { "cb_cksq_40m",
+							 "apll2_d4" };
+
+static const char *const conn_mcusys_parents[] __initconst = { "cb_cksq_40m",
+							       "cb_mm_d2" };
+
+static const char *const eip_b_parents[] __initconst = { "cb_cksq_40m",
+							 "cb_net2_800m" };
+
+static const char *const aud_l_parents[] __initconst = { "cb_cksq_40m",
+							 "cb_apll2_196m",
+							 "m_d8_d2" };
+
+static const char *const a_tuner_parents[] __initconst = { "cb_cksq_40m",
+							   "apll2_d4",
+							   "m_d8_d2" };
+
+static const char *const u2u3_sys_parents[] __initconst = { "cb_cksq_40m",
+							    "net1_d5_d4" };
+
+static const char *const da_u2_refsel_parents[] __initconst = { "cb_cksq_40m",
+								"cb_u2_phyd" };
+
+static const struct mtk_mux top_muxes[] = {
+	/* CLK_CFG_0 */
+	MUX_GATE_CLR_SET_UPD(CK_TOP_NFI1X_SEL, "nfi1x_sel", nfi1x_parents,
+			     0x000, 0x004, 0x008, 0, 3, 7, 0x1C0, 0),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_SPINFI_SEL, "spinfi_sel", spinfi_parents,
+			     0x000, 0x004, 0x008, 8, 3, 15, 0x1C0, 1),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_SPI_SEL, "spi_sel", spi_parents, 0x000,
+			     0x004, 0x008, 16, 3, 23, 0x1C0, 2),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_SPIM_MST_SEL, "spim_mst_sel", spi_parents,
+			     0x000, 0x004, 0x008, 24, 3, 31, 0x1C0, 3),
+	/* CLK_CFG_1 */
+	MUX_GATE_CLR_SET_UPD(CK_TOP_UART_SEL, "uart_sel", uart_parents, 0x010,
+			     0x014, 0x018, 0, 2, 7, 0x1C0, 4),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_PWM_SEL, "pwm_sel", pwm_parents, 0x010,
+			     0x014, 0x018, 8, 2, 15, 0x1C0, 5),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_I2C_SEL, "i2c_sel", i2c_parents, 0x010,
+			     0x014, 0x018, 16, 2, 23, 0x1C0, 6),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_PEXTP_TL_SEL, "pextp_tl_ck_sel",
+			     pextp_tl_ck_parents, 0x010, 0x014, 0x018, 24, 2,
+			     31, 0x1C0, 7),
+	/* CLK_CFG_2 */
+	MUX_GATE_CLR_SET_UPD(CK_TOP_EMMC_250M_SEL, "emmc_250m_sel",
+			     emmc_250m_parents, 0x020, 0x024, 0x028, 0, 1, 7,
+			     0x1C0, 8),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_EMMC_416M_SEL, "emmc_416m_sel",
+			     emmc_416m_parents, 0x020, 0x024, 0x028, 8, 1, 15,
+			     0x1C0, 9),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_F_26M_ADC_SEL, "f_26m_adc_sel",
+			     f_26m_adc_parents, 0x020, 0x024, 0x028, 16, 1, 23,
+			     0x1C0, 10),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_DRAMC_SEL, "dramc_sel", f_26m_adc_parents,
+			     0x020, 0x024, 0x028, 24, 1, 31, 0x1C0, 11),
+	/* CLK_CFG_3 */
+	MUX_GATE_CLR_SET_UPD(CK_TOP_DRAMC_MD32_SEL, "dramc_md32_sel",
+			     dramc_md32_parents, 0x030, 0x034, 0x038, 0, 1, 7,
+			     0x1C0, 12),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_SYSAXI_SEL, "sysaxi_sel", sysaxi_parents,
+			     0x030, 0x034, 0x038, 8, 2, 15, 0x1C0, 13),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_SYSAPB_SEL, "sysapb_sel", sysapb_parents,
+			     0x030, 0x034, 0x038, 16, 2, 23, 0x1C0, 14),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_ARM_DB_MAIN_SEL, "arm_db_main_sel",
+			     arm_db_main_parents, 0x030, 0x034, 0x038, 24, 1,
+			     31, 0x1C0, 15),
+	/* CLK_CFG_4 */
+	MUX_GATE_CLR_SET_UPD(CK_TOP_ARM_DB_JTSEL, "arm_db_jtsel",
+			     arm_db_jtsel_parents, 0x040, 0x044, 0x048, 0, 1, 7,
+			     0x1C0, 16),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_NETSYS_SEL, "netsys_sel", netsys_parents,
+			     0x040, 0x044, 0x048, 8, 1, 15, 0x1C0, 17),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_NETSYS_500M_SEL, "netsys_500m_sel",
+			     netsys_500m_parents, 0x040, 0x044, 0x048, 16, 1,
+			     23, 0x1C0, 18),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_NETSYS_MCU_SEL, "netsys_mcu_sel",
+			     netsys_mcu_parents, 0x040, 0x044, 0x048, 24, 3, 31,
+			     0x1C0, 19),
+	/* CLK_CFG_5 */
+	MUX_GATE_CLR_SET_UPD(CK_TOP_NETSYS_2X_SEL, "netsys_2x_sel",
+			     netsys_2x_parents, 0x050, 0x054, 0x058, 0, 2, 7,
+			     0x1C0, 20),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_SGM_325M_SEL, "sgm_325m_sel",
+			     sgm_325m_parents, 0x050, 0x054, 0x058, 8, 1, 15,
+			     0x1C0, 21),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_SGM_REG_SEL, "sgm_reg_sel", sgm_reg_parents,
+			     0x050, 0x054, 0x058, 16, 1, 23, 0x1C0, 22),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_A1SYS_SEL, "a1sys_sel", a1sys_parents,
+			     0x050, 0x054, 0x058, 24, 1, 31, 0x1C0, 23),
+	/* CLK_CFG_6 */
+	MUX_GATE_CLR_SET_UPD(CK_TOP_CONN_MCUSYS_SEL, "conn_mcusys_sel",
+			     conn_mcusys_parents, 0x060, 0x064, 0x068, 0, 1, 7,
+			     0x1C0, 24),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_EIP_B_SEL, "eip_b_sel", eip_b_parents,
+			     0x060, 0x064, 0x068, 8, 1, 15, 0x1C0, 25),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_PCIE_PHY_SEL, "pcie_phy_sel",
+			     f_26m_adc_parents, 0x060, 0x064, 0x068, 16, 1, 23,
+			     0x1C0, 26),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_USB3_PHY_SEL, "usb3_phy_sel",
+			     f_26m_adc_parents, 0x060, 0x064, 0x068, 24, 1, 31,
+			     0x1C0, 27),
+	/* CLK_CFG_7 */
+	MUX_GATE_CLR_SET_UPD(CK_TOP_F26M_SEL, "csw_f26m_sel", f_26m_adc_parents,
+			     0x070, 0x074, 0x078, 0, 1, 7, 0x1C0, 28),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_AUD_L_SEL, "aud_l_sel", aud_l_parents,
+			     0x070, 0x074, 0x078, 8, 2, 15, 0x1C0, 29),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_A_TUNER_SEL, "a_tuner_sel", a_tuner_parents,
+			     0x070, 0x074, 0x078, 16, 2, 23, 0x1C0, 30),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_U2U3_SEL, "u2u3_sel", f_26m_adc_parents,
+			     0x070, 0x074, 0x078, 24, 1, 31, 0x1C4, 0),
+	/* CLK_CFG_8 */
+	MUX_GATE_CLR_SET_UPD(CK_TOP_U2U3_SYS_SEL, "u2u3_sys_sel",
+			     u2u3_sys_parents, 0x080, 0x084, 0x088, 0, 1, 7,
+			     0x1C4, 1),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_U2U3_XHCI_SEL, "u2u3_xhci_sel",
+			     u2u3_sys_parents, 0x080, 0x084, 0x088, 8, 1, 15,
+			     0x1C4, 2),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_DA_U2_REFSEL, "da_u2_refsel",
+			     da_u2_refsel_parents, 0x080, 0x084, 0x088, 16, 1,
+			     23, 0x1C4, 3),
+	MUX_GATE_CLR_SET_UPD(CK_TOP_DA_U2_CK_1P_SEL, "da_u2_ck_1p_sel",
+			     da_u2_refsel_parents, 0x080, 0x084, 0x088, 24, 1,
+			     31, 0x1C4, 4),
+	/* CLK_CFG_9 */
+	MUX_GATE_CLR_SET_UPD(CK_TOP_AP2CNN_HOST_SEL, "ap2cnn_host_sel",
+			     sgm_reg_parents, 0x090, 0x094, 0x098, 0, 1, 7,
+			     0x1C4, 5),
+};
+
+static const char *const infra_uart0_parents[] __initconst = { "infra_ck_f26m",
+							       "infra_uart" };
+
+static const char *const infra_spi0_parents[] __initconst = { "infra_i2c",
+							      "infra_ispi0" };
+
+static const char *const infra_spi1_parents[] __initconst = { "infra_i2c",
+							      "infra_ispi1" };
+
+static const char *const infra_pwm_bsel_parents[] __initconst = {
+	"infra_ck_f32k", "infra_ck_f26m", "infra_66m_mck", "infra_pwm"
+};
+
+static const char *const infra_pcie_parents[] __initconst = {
+	"infra_ck_f32k", "infra_ck_f26m", "cb_cksq_40m", "infra_pcie"
+};
+
+static const struct mtk_mux infra_muxes[] = {
+	/* MODULE_CLK_SEL_0 */
+	MUX_GATE_CLR_SET_UPD(CK_INFRA_UART0_SEL, "infra_uart0_sel",
+			     infra_uart0_parents, 0x0018, 0x0010, 0x0014, 0, 1,
+			     -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CK_INFRA_UART1_SEL, "infra_uart1_sel",
+			     infra_uart0_parents, 0x0018, 0x0010, 0x0014, 1, 1,
+			     -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CK_INFRA_UART2_SEL, "infra_uart2_sel",
+			     infra_uart0_parents, 0x0018, 0x0010, 0x0014, 2, 1,
+			     -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CK_INFRA_SPI0_SEL, "infra_spi0_sel",
+			     infra_spi0_parents, 0x0018, 0x0010, 0x0014, 4, 1,
+			     -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CK_INFRA_SPI1_SEL, "infra_spi1_sel",
+			     infra_spi1_parents, 0x0018, 0x0010, 0x0014, 5, 1,
+			     -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CK_INFRA_PWM1_SEL, "infra_pwm1_sel",
+			     infra_pwm_bsel_parents, 0x0018, 0x0010, 0x0014, 9,
+			     2, -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CK_INFRA_PWM2_SEL, "infra_pwm2_sel",
+			     infra_pwm_bsel_parents, 0x0018, 0x0010, 0x0014, 11,
+			     2, -1, -1, -1),
+	MUX_GATE_CLR_SET_UPD(CK_INFRA_PWM_BSEL, "infra_pwm_bsel",
+			     infra_pwm_bsel_parents, 0x0018, 0x0010, 0x0014, 13,
+			     2, -1, -1, -1),
+	/* MODULE_CLK_SEL_1 */
+	MUX_GATE_CLR_SET_UPD(CK_INFRA_PCIE_SEL, "infra_pcie_sel",
+			     infra_pcie_parents, 0x0028, 0x0020, 0x0024, 0, 2,
+			     -1, -1, -1),
+};
+
+static const struct mtk_gate_regs infra0_cg_regs = {
+	.set_ofs = 0x40,
+	.clr_ofs = 0x44,
+	.sta_ofs = 0x48,
+};
+
+static const struct mtk_gate_regs infra1_cg_regs = {
+	.set_ofs = 0x50,
+	.clr_ofs = 0x54,
+	.sta_ofs = 0x58,
+};
+
+static const struct mtk_gate_regs infra2_cg_regs = {
+	.set_ofs = 0x60,
+	.clr_ofs = 0x64,
+	.sta_ofs = 0x68,
+};
+
+#define GATE_INFRA0(_id, _name, _parent, _shift)                               \
+	{                                                                      \
+		.id = _id, .name = _name, .parent_name = _parent,              \
+		.regs = &infra0_cg_regs, .shift = _shift,                      \
+		.ops = &mtk_clk_gate_ops_setclr,                               \
+	}
+
+#define GATE_INFRA1(_id, _name, _parent, _shift)                               \
+	{                                                                      \
+		.id = _id, .name = _name, .parent_name = _parent,              \
+		.regs = &infra1_cg_regs, .shift = _shift,                      \
+		.ops = &mtk_clk_gate_ops_setclr,                               \
+	}
+
+#define GATE_INFRA2(_id, _name, _parent, _shift)                               \
+	{                                                                      \
+		.id = _id, .name = _name, .parent_name = _parent,              \
+		.regs = &infra2_cg_regs, .shift = _shift,                      \
+		.ops = &mtk_clk_gate_ops_setclr,                               \
+	}
+
+static const struct mtk_gate infra_clks[] __initconst = {
+	/* INFRA0 */
+	GATE_INFRA0(CK_INFRA_GPT_STA, "infra_gpt_sta", "infra_66m_mck", 0),
+	GATE_INFRA0(CK_INFRA_PWM_HCK, "infra_pwm_hck", "infra_66m_mck", 1),
+	GATE_INFRA0(CK_INFRA_PWM_STA, "infra_pwm_sta", "infra_pwm_bck", 2),
+	GATE_INFRA0(CK_INFRA_PWM1_CK, "infra_pwm1", "infra_pwm_ck1", 3),
+	GATE_INFRA0(CK_INFRA_PWM2_CK, "infra_pwm2", "infra_pwm_ck2", 4),
+	GATE_INFRA0(CK_INFRA_CQ_DMA_CK, "infra_cq_dma", "infra_133m_hck", 6),
+	GATE_INFRA0(CK_INFRA_EIP97_CK, "infra_eip97", "infra_eip", 7),
+	GATE_INFRA0(CK_INFRA_AUD_BUS_CK, "infra_aud_bus", "infra_66m_phck", 8),
+	GATE_INFRA0(CK_INFRA_AUD_26M_CK, "infra_aud_26m", "infra_ck_f26m", 9),
+	GATE_INFRA0(CK_INFRA_AUD_L_CK, "infra_aud_l", "infra_faud_l", 10),
+	GATE_INFRA0(CK_INFRA_AUD_AUD_CK, "infra_aud_aud", "infra_faud_aud", 11),
+	GATE_INFRA0(CK_INFRA_AUD_EG2_CK, "infra_aud_eg2", "infra_faud_eg2", 13),
+	GATE_INFRA0(CK_INFRA_DRAMC_26M_CK, "infra_dramc_26m", "infra_ck_f26m",
+		    14),
+	GATE_INFRA0(CK_INFRA_DBG_CK, "infra_dbg", "infra_66m_mck", 15),
+	GATE_INFRA0(CK_INFRA_AP_DMA_CK, "infra_ap_dma", "infra_66m_mck", 16),
+	GATE_INFRA0(CK_INFRA_SEJ_CK, "infra_sej", "infra_66m_mck", 24),
+	GATE_INFRA0(CK_INFRA_SEJ_13M_CK, "infra_sej_13m", "infra_ck_f26m", 25),
+	GATE_INFRA0(CK_INFRA_TRNG_CK, "infra_trng", "infra_hd_133m", 26),
+	/* INFRA1 */
+	GATE_INFRA1(CK_INFRA_THERM_CK, "infra_therm", "infra_ck_f26m", 0),
+	GATE_INFRA1(CK_INFRA_I2CO_CK, "infra_i2co", "infra_i2cs", 1),
+	GATE_INFRA1(CK_INFRA_UART0_CK, "infra_uart0", "infra_mux_uart0", 2),
+	GATE_INFRA1(CK_INFRA_UART1_CK, "infra_uart1", "infra_mux_uart1", 3),
+	GATE_INFRA1(CK_INFRA_UART2_CK, "infra_uart2", "infra_mux_uart2", 4),
+	GATE_INFRA1(CK_INFRA_NFI1_CK, "infra_nfi1", "infra_nfi", 8),
+	GATE_INFRA1(CK_INFRA_SPINFI1_CK, "infra_spinfi1", "infra_spinfi", 9),
+	GATE_INFRA1(CK_INFRA_NFI_HCK_CK, "infra_nfi_hck", "infra_66m_mck", 10),
+	GATE_INFRA1(CK_INFRA_SPI0_CK, "infra_spi0", "infra_mux_spi0", 11),
+	GATE_INFRA1(CK_INFRA_SPI1_CK, "infra_spi1", "infra_mux_spi1", 12),
+	GATE_INFRA1(CK_INFRA_SPI0_HCK_CK, "infra_spi0_hck", "infra_66m_mck",
+		    13),
+	GATE_INFRA1(CK_INFRA_SPI1_HCK_CK, "infra_spi1_hck", "infra_66m_mck",
+		    14),
+	GATE_INFRA1(CK_INFRA_FRTC_CK, "infra_frtc", "infra_rtc_32k", 15),
+	GATE_INFRA1(CK_INFRA_MSDC_CK, "infra_msdc", "infra_fmsdc", 16),
+	GATE_INFRA1(CK_INFRA_MSDC_HCK_CK, "infra_msdc_hck", "infra_fmsdc_hck",
+		    17),
+	GATE_INFRA1(CK_INFRA_MSDC_133M_CK, "infra_msdc_133m", "infra_peri_133m",
+		    18),
+	GATE_INFRA1(CK_INFRA_MSDC_66M_CK, "infra_msdc_66m", "infra_66m_phck",
+		    19),
+	GATE_INFRA1(CK_INFRA_ADC_26M_CK, "infra_adc_26m", "csw_f26m", 20),
+	GATE_INFRA1(CK_INFRA_ADC_FRC_CK, "infra_adc_frc", "csw_f26m", 21),
+	GATE_INFRA1(CK_INFRA_FBIST2FPC_CK, "infra_fbist2fpc", "infra_nfi", 23),
+	/* INFRA2 */
+	GATE_INFRA2(CK_INFRA_IUSB_133_CK, "infra_iusb_133", "infra_133m_phck",
+		    0),
+	GATE_INFRA2(CK_INFRA_IUSB_66M_CK, "infra_iusb_66m", "infra_66m_phck",
+		    1),
+	GATE_INFRA2(CK_INFRA_IUSB_SYS_CK, "infra_iusb_sys", "infra_usb_sys", 2),
+	GATE_INFRA2(CK_INFRA_IUSB_CK, "infra_iusb", "infra_usb", 3),
+	GATE_INFRA2(CK_INFRA_IPCIE_CK, "infra_ipcie", "infra_pcie_mux", 12),
+	GATE_INFRA2(CK_INFRA_IPCIE_PIPE_CK, "infra_ipcie_pipe", "cb_cksq_40m",
+		    13),
+	GATE_INFRA2(CK_INFRA_IPCIER_CK, "infra_ipcier", "infra_f26m_ck0", 14),
+	GATE_INFRA2(CK_INFRA_IPCIEB_CK, "infra_ipcieb", "infra_133m_phck", 15),
+};
+
+static const struct mtk_pll_data plls[] = {
+	PLL(CK_APMIXED_ARMPLL, "armpll", 0x0200, 0x020C, 0x00000001, 0, 32,
+	    0x0200, 4, 0, 0x0204, 0),
+	PLL(CK_APMIXED_NET2PLL, "net2pll", 0x0210, 0x021C, 0x00000001, 0, 32,
+	    0x0210, 4, 0, 0x0214, 0),
+	PLL(CK_APMIXED_MMPLL, "mmpll", 0x0220, 0x022C, 0x00000001, 0, 32,
+	    0x0220, 4, 0, 0x0224, 0),
+	PLL(CK_APMIXED_SGMPLL, "sgmpll", 0x0230, 0x023c, 0x00000001, 0, 32,
+	    0x0230, 4, 0, 0x0234, 0),
+	PLL(CK_APMIXED_WEDMCUPLL, "wedmcupll", 0x0240, 0x024c, 0x00000001, 0,
+	    32, 0x0240, 4, 0, 0x0244, 0),
+	PLL(CK_APMIXED_NET1PLL, "net1pll", 0x0250, 0x025c, 0x00000001, 0, 32,
+	    0x0250, 4, 0, 0x0254, 0),
+	PLL(CK_APMIXED_MPLL, "mpll", 0x0260, 0x0270, 0x00000001, 0, 32, 0x0260,
+	    4, 0, 0x0264, 0),
+	PLL(CK_APMIXED_APLL2, "apll2", 0x0278, 0x0288, 0x00000001, 0, 32,
+	    0x0278, 4, 0, 0x027c, 0),
+};
+
+static void __init mtk_infracfg_init(struct device_node *node)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+
+	clk_data = mtk_alloc_clk_data(CLK_INFRA_NR_CLK);
+
+	mtk_clk_register_factors(infra_divs, ARRAY_SIZE(infra_divs), clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+}
+CLK_OF_DECLARE(mtk_infracfg, "mediatek,mt7986-infracfg", mtk_infracfg_init);
+
+static void __init mtk_topckgen_init(struct device_node *node)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+	void __iomem *base;
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%s(): ioremap failed\n", __func__);
+		return;
+	}
+
+	clk_data = mtk_alloc_clk_data(CLK_TOP_NR_CLK);
+
+	mtk_clk_register_factors(top_divs, ARRAY_SIZE(top_divs), clk_data);
+	mtk_clk_register_muxes(top_muxes, ARRAY_SIZE(top_muxes), node,
+			       &mt7986_clk_lock, clk_data);
+
+	clk_prepare_enable(clk_data->clks[CK_TOP_SYSAXI_SEL]);
+	clk_prepare_enable(clk_data->clks[CK_TOP_SYSAPB_SEL]);
+	clk_prepare_enable(clk_data->clks[CK_TOP_DRAMC_SEL]);
+	clk_prepare_enable(clk_data->clks[CK_TOP_DRAMC_MD32_SEL]);
+	clk_prepare_enable(clk_data->clks[CK_TOP_F26M_SEL]);
+	clk_prepare_enable(clk_data->clks[CK_TOP_SGM_REG_SEL]);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+}
+CLK_OF_DECLARE(mtk_topckgen, "mediatek,mt7986-topckgen", mtk_topckgen_init);
+
+static void __init mtk_infracfg_ao_init(struct device_node *node)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+	void __iomem *base;
+
+	base = of_iomap(node, 0);
+	if (!base) {
+		pr_err("%s(): ioremap failed\n", __func__);
+		return;
+	}
+
+	clk_data = mtk_alloc_clk_data(CLK_INFRA_AO_NR_CLK);
+
+	mtk_clk_register_muxes(infra_muxes, ARRAY_SIZE(infra_muxes), node,
+			       &mt7986_clk_lock, clk_data);
+	mtk_clk_register_gates(node, infra_clks, ARRAY_SIZE(infra_clks),
+			       clk_data);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+}
+CLK_OF_DECLARE(mtk_infracfg_ao, "mediatek,mt7986-infracfg_ao",
+	       mtk_infracfg_ao_init);
+
+static void __init mtk_apmixedsys_init(struct device_node *node)
+{
+	struct clk_onecell_data *clk_data;
+	int r;
+
+	clk_data = mtk_alloc_clk_data(CLK_APMIXED_NR_CLK);
+
+	mtk_clk_register_plls(node, plls, ARRAY_SIZE(plls), clk_data);
+
+	clk_prepare_enable(clk_data->clks[CK_APMIXED_ARMPLL]);
+
+	r = of_clk_add_provider(node, of_clk_src_onecell_get, clk_data);
+	if (r)
+		pr_err("%s(): could not register clock provider: %d\n",
+		       __func__, r);
+}
+CLK_OF_DECLARE(mtk_apmixedsys, "mediatek,mt7986-apmixedsys",
+	       mtk_apmixedsys_init);
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH 04/12] pinctrl: mediatek: moore: use pin number in mtk_pin_desc instead of array index
  2021-07-26  7:14 [PATCH 00/12] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (2 preceding siblings ...)
  2021-07-26  7:14 ` [PATCH 03/12] clk: mediatek: add mt7986 clock support Sam Shih
@ 2021-07-26  7:14 ` Sam Shih
  2021-07-28 18:26   ` Sean Wang
  2021-07-26  7:14 ` [PATCH 05/12] dt-bindings: pinctrl: update bindings for MT7986 SoC Sam Shih
                   ` (7 subsequent siblings)
  11 siblings, 1 reply; 26+ messages in thread
From: Sam Shih @ 2021-07-26  7:14 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

Certain SoC are missing the middle part gpios in consecutive pins,
it's better to use pin number in mtk_pin_desc instead of array index
for the extensibility

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 drivers/pinctrl/mediatek/pinctrl-moore.c | 61 ++++++++++++++++++++++++
 1 file changed, 61 insertions(+)

diff --git a/drivers/pinctrl/mediatek/pinctrl-moore.c b/drivers/pinctrl/mediatek/pinctrl-moore.c
index 3a4a23c40a71..16206254ec3d 100644
--- a/drivers/pinctrl/mediatek/pinctrl-moore.c
+++ b/drivers/pinctrl/mediatek/pinctrl-moore.c
@@ -35,6 +35,19 @@ static const struct pin_config_item mtk_conf_items[] = {
 };
 #endif
 
+static int mtk_pin_desc_lookup(struct mtk_pinctrl *hw, int pin)
+{
+	int idx;
+
+	for (idx = 0 ; idx < hw->soc->npins ; idx++)
+		if (hw->soc->pins[idx].number == pin)
+			break;
+	if (idx < hw->soc->npins)
+		return idx;
+
+	return -EINVAL;
+}
+
 static int mtk_pinmux_set_mux(struct pinctrl_dev *pctldev,
 			      unsigned int selector, unsigned int group)
 {
@@ -74,6 +87,13 @@ static int mtk_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev,
 {
 	struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
 	const struct mtk_pin_desc *desc;
+	int err;
+
+	err = mtk_pin_desc_lookup(hw, pin);
+	if (err >= 0)
+		pin = err;
+	else
+		return err;
 
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
 
@@ -87,6 +107,13 @@ static int mtk_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
 {
 	struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
 	const struct mtk_pin_desc *desc;
+	int err;
+
+	err = mtk_pin_desc_lookup(hw, pin);
+	if (err >= 0)
+		pin = err;
+	else
+		return err;
 
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
 
@@ -102,6 +129,12 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
 	int val, val2, err, reg, ret = 1;
 	const struct mtk_pin_desc *desc;
 
+	err = mtk_pin_desc_lookup(hw, pin);
+	if (err >= 0)
+		pin = err;
+	else
+		return err;
+
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
 
 	switch (param) {
@@ -217,6 +250,12 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
 	u32 reg, param, arg;
 	int cfg, err = 0;
 
+	err = mtk_pin_desc_lookup(hw, pin);
+	if (err >= 0)
+		pin = err;
+	else
+		return err;
+
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
 
 	for (cfg = 0; cfg < num_configs; cfg++) {
@@ -434,6 +473,12 @@ static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
 	const struct mtk_pin_desc *desc;
 	int value, err;
 
+	err = mtk_pin_desc_lookup(hw, gpio);
+	if (err >= 0)
+		gpio = err;
+	else
+		return err;
+
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
 
 	err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DI, &value);
@@ -447,6 +492,15 @@ static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
 {
 	struct mtk_pinctrl *hw = gpiochip_get_data(chip);
 	const struct mtk_pin_desc *desc;
+	int err;
+
+	err = mtk_pin_desc_lookup(hw, gpio);
+	if (err >= 0) {
+		gpio = err;
+	} else {
+		dev_err(hw->dev, "Failed to set gpio %d\n", gpio);
+		return;
+	}
 
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
 
@@ -488,6 +542,13 @@ static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
 	struct mtk_pinctrl *hw = gpiochip_get_data(chip);
 	const struct mtk_pin_desc *desc;
 	u32 debounce;
+	int err;
+
+	err = mtk_pin_desc_lookup(hw, offset);
+	if (err >= 0)
+		offset = err;
+	else
+		return err;
 
 	desc = (const struct mtk_pin_desc *)&hw->soc->pins[offset];
 
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH 05/12] dt-bindings: pinctrl: update bindings for MT7986 SoC
  2021-07-26  7:14 [PATCH 00/12] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (3 preceding siblings ...)
  2021-07-26  7:14 ` [PATCH 04/12] pinctrl: mediatek: moore: use pin number in mtk_pin_desc instead of array index Sam Shih
@ 2021-07-26  7:14 ` Sam Shih
  2021-07-29 22:51   ` Rob Herring
  2021-07-26  7:14 ` [PATCH 06/12] pinctrl: mediatek: add support " Sam Shih
                   ` (6 subsequent siblings)
  11 siblings, 1 reply; 26+ messages in thread
From: Sam Shih @ 2021-07-26  7:14 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

This updates bindings for MT7986 pinctrl driver.
The difference of pinctrl between mt7986a and mt7986b
is that pin-41 to pin-65 do not exist on mt7986b

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 .../bindings/pinctrl/pinctrl-mt7622.txt       | 284 ++++++++++++++++++
 1 file changed, 284 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
index 7a7aca1ed705..3c42eaad7a5e 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt7622.txt
@@ -4,6 +4,8 @@ Required properties for the root node:
  - compatible: Should be one of the following
 	       "mediatek,mt7622-pinctrl" for MT7622 SoC
 	       "mediatek,mt7629-pinctrl" for MT7629 SoC
+	       "mediatek,mt7986a-pinctrl" for MT7986a SoC
+	       "mediatek,mt7986b-pinctrl" for MT7986b SoC
  - reg: offset and length of the pinctrl space
 
  - gpio-controller: Marks the device node as a GPIO controller.
@@ -455,6 +457,288 @@ Valid values for groups are:
 	"wf0_5g"			"wifi"		0, 1, 2, 3, 4, 5, 6,
 							7, 8, 9, 10
 
+== Valid values for pins, function and groups on MT7986a ==
+
+Valid values for pins are:
+pins can be referenced via the pin names as the below table shown and the
+related physical number is also put ahead of those names which helps cross
+references to pins between groups to know whether pins assignment conflict
+happens among devices try to acquire those available pins.
+
+	Pin #:  Valid values for pins
+	-----------------------------
+	PIN 0: "SYS_WATCHDOG"
+	PIN 1: "WF2G_LED"
+	PIN 2: "WF5G_LED"
+	PIN 3: "I2C_SCL"
+	PIN 4: "I2C_SDA"
+	PIN 5: "GPIO_0"
+	PIN 6: "GPIO_1"
+	PIN 7: "GPIO_2"
+	PIN 8: "GPIO_3"
+	PIN 9: "GPIO_4"
+	PIN 10: "GPIO_5"
+	PIN 11: "GPIO_6"
+	PIN 12: "GPIO_7"
+	PIN 13: "GPIO_8"
+	PIN 14: "GPIO_9"
+	PIN 15: "GPIO_10"
+	PIN 16: "GPIO_11"
+	PIN 17: "GPIO_12"
+	PIN 18: "GPIO_13"
+	PIN 19: "GPIO_14"
+	PIN 20: "GPIO_15"
+	PIN 21: "PWM0"
+	PIN 22: "PWM1"
+	PIN 23: "SPI0_CLK"
+	PIN 24: "SPI0_MOSI"
+	PIN 25: "SPI0_MISO"
+	PIN 26: "SPI0_CS"
+	PIN 27: "SPI0_HOLD"
+	PIN 28: "SPI0_WP"
+	PIN 29: "SPI1_CLK"
+	PIN 30: "SPI1_MOSI"
+	PIN 31: "SPI1_MISO"
+	PIN 32: "SPI1_CS"
+	PIN 33: "SPI2_CLK"
+	PIN 34: "SPI2_MOSI"
+	PIN 35: "SPI2_MISO"
+	PIN 36: "SPI2_CS"
+	PIN 37: "SPI2_HOLD"
+	PIN 38: "SPI2_WP"
+	PIN 39: "UART0_RXD"
+	PIN 40: "UART0_TXD"
+	PIN 41: "PCIE_PERESET_N"
+	PIN 42: "UART1_RXD"
+	PIN 43: "UART1_TXD"
+	PIN 44: "UART1_CTS"
+	PIN 45: "UART1_RTS"
+	PIN 46: "UART2_RXD"
+	PIN 47: "UART2_TXD"
+	PIN 48: "UART2_CTS"
+	PIN 49: "UART2_RTS"
+	PIN 50: "EMMC_DATA_0"
+	PIN 51: "EMMC_DATA_1"
+	PIN 52: "EMMC_DATA_2"
+	PIN 53: "EMMC_DATA_3"
+	PIN 54: "EMMC_DATA_4"
+	PIN 55: "EMMC_DATA_5"
+	PIN 56: "EMMC_DATA_6"
+	PIN 57: "EMMC_DATA_7"
+	PIN 58: "EMMC_CMD"
+	PIN 59: "EMMC_CK"
+	PIN 60: "EMMC_DSL"
+	PIN 61: "EMMC_RSTB"
+	PIN 62: "PCM_DTX"
+	PIN 63: "PCM_DRX"
+	PIN 64: "PCM_CLK"
+	PIN 65: "PCM_FS"
+	PIN 66: "MT7531_INT"
+	PIN 67: "SMI_MDC"
+	PIN 68: "SMI_MDIO"
+	PIN 69: "WF0_DIG_RESETB"
+	PIN 70: "WF0_CBA_RESETB"
+	PIN 71: "WF0_XO_REQ"
+	PIN 72: "WF0_TOP_CLK"
+	PIN 73: "WF0_TOP_DATA"
+	PIN 74: "WF0_HB1"
+	PIN 75: "WF0_HB2"
+	PIN 76: "WF0_HB3"
+	PIN 77: "WF0_HB4"
+	PIN 78: "WF0_HB0"
+	PIN 79: "WF0_HB0_B"
+	PIN 80: "WF0_HB5"
+	PIN 81: "WF0_HB6"
+	PIN 82: "WF0_HB7"
+	PIN 83: "WF0_HB8"
+	PIN 84: "WF0_HB9"
+	PIN 85: "WF0_HB10"
+	PIN 86: "WF1_DIG_RESETB"
+	PIN 87: "WF1_CBA_RESETB"
+	PIN 88: "WF1_XO_REQ"
+	PIN 89: "WF1_TOP_CLK"
+	PIN 90: "WF1_TOP_DATA"
+	PIN 91: "WF1_HB1"
+	PIN 92: "WF1_HB2"
+	PIN 93: "WF1_HB3"
+	PIN 94: "WF1_HB4"
+	PIN 95: "WF1_HB0"
+	PIN 96: "WF1_HB0_B"
+	PIN 97: "WF1_HB5"
+	PIN 98: "WF1_HB6"
+	PIN 99: "WF1_HB7"
+	PIN 100: "WF1_HB8"
+
+Valid values for function are:
+	"audio, "emmc", "eth", "i2c", "wifi", "led", "flash", "pcie",
+	"pwm", "spi", "uart", "watchdog"
+
+Valid values for groups are:
+additional data is put followingly with valid value allowing us to know which
+applicable function and which relevant pins (in pin#) are able applied for that
+group.
+
+	Valid value			function	pins (in pin#)
+	-------------------------------------------------------------------------
+	"watchdog"			"watchdog"	0
+	"wifi_led"			"led"		1, 2
+	"i2c"				"i2c"		3, 4
+	"uart1_0"			"uart"		7, 8, 9, 10
+	"pcie_clk"			"pcie"		9
+	"pcie_wake"			"pcie"		10
+	"spi1_0"			"spi"		11, 12, 13, 14
+	"pwm1_1"			"pwm"		20,
+	"pwm0"				"pwm"		21,
+	"pwm1_0"			"pwm"		22,
+	"snfi"				"flash"		23, 24, 25, 26, 27, 28
+	"spi1_2"			"spi"		29, 30, 31, 32
+	"emmc_45"			"emmc"		22, 23, 24, 25, 26, 27,
+							28, 29, 30, 31, 32
+	"spi1_1"			"spi"		23, 24, 25, 26
+	"uart1_2"			"uart"		29, 30, 31, 32
+	"uart1_1"			"uart"		23, 24, 25, 26
+	"uart2_0"			"uart"		29, 30, 31, 32
+	"spi0"				"spi"		33, 34, 35, 36
+	"spi0_wp_hold"			"spi"		37, 38
+	"uart1_3_rx_tx"			"uart"		35, 36
+	"uart1_3_cts_rts"		"uart"		37, 38
+	"uart2_1"			"uart"		33, 34, 35, 36
+	"spi1_3"			"spi"		33, 34, 35, 36
+	"uart0"				"uart"		39, 40
+	"pcie_pereset"			"pcie"		41
+	"uart1"				"uart"		42, 43, 44, 45
+	"uart2"				"uart"		46, 47, 48, 49
+	"emmc_51"			"emmc"		50, 51, 52, 53, 54, 55,
+							56, 57, 57, 59, 60, 61
+	"pcm"				"audio"		62, 63, 64, 65
+	"i2s"				"audio"		62, 63, 64, 65
+	"switch_int"			"eth"		66
+	"mdc_mdio"			"eth"		67
+
+== Valid values for pins, function and groups on MT7986b ==
+
+Valid values for pins are:
+pins can be referenced via the pin names as the below table shown and the
+related physical number is also put ahead of those names which helps cross
+references to pins between groups to know whether pins assignment conflict
+happens among devices try to acquire those available pins.
+
+	Pin #:  Valid values for pins
+	-----------------------------
+	PIN 0: "SYS_WATCHDOG"
+	PIN 1: "WF2G_LED"
+	PIN 2: "WF5G_LED"
+	PIN 3: "I2C_SCL"
+	PIN 4: "I2C_SDA"
+	PIN 5: "GPIO_0"
+	PIN 6: "GPIO_1"
+	PIN 7: "GPIO_2"
+	PIN 8: "GPIO_3"
+	PIN 9: "GPIO_4"
+	PIN 10: "GPIO_5"
+	PIN 11: "GPIO_6"
+	PIN 12: "GPIO_7"
+	PIN 13: "GPIO_8"
+	PIN 14: "GPIO_9"
+	PIN 15: "GPIO_10"
+	PIN 16: "GPIO_11"
+	PIN 17: "GPIO_12"
+	PIN 18: "GPIO_13"
+	PIN 19: "GPIO_14"
+	PIN 20: "GPIO_15"
+	PIN 21: "PWM0"
+	PIN 22: "PWM1"
+	PIN 23: "SPI0_CLK"
+	PIN 24: "SPI0_MOSI"
+	PIN 25: "SPI0_MISO"
+	PIN 26: "SPI0_CS"
+	PIN 27: "SPI0_HOLD"
+	PIN 28: "SPI0_WP"
+	PIN 29: "SPI1_CLK"
+	PIN 30: "SPI1_MOSI"
+	PIN 31: "SPI1_MISO"
+	PIN 32: "SPI1_CS"
+	PIN 33: "SPI2_CLK"
+	PIN 34: "SPI2_MOSI"
+	PIN 35: "SPI2_MISO"
+	PIN 36: "SPI2_CS"
+	PIN 37: "SPI2_HOLD"
+	PIN 38: "SPI2_WP"
+	PIN 39: "UART0_RXD"
+	PIN 40: "UART0_TXD"
+	PIN 66: "MT7531_INT"
+	PIN 67: "SMI_MDC"
+	PIN 68: "SMI_MDIO"
+	PIN 69: "WF0_DIG_RESETB"
+	PIN 70: "WF0_CBA_RESETB"
+	PIN 71: "WF0_XO_REQ"
+	PIN 72: "WF0_TOP_CLK"
+	PIN 73: "WF0_TOP_DATA"
+	PIN 74: "WF0_HB1"
+	PIN 75: "WF0_HB2"
+	PIN 76: "WF0_HB3"
+	PIN 77: "WF0_HB4"
+	PIN 78: "WF0_HB0"
+	PIN 79: "WF0_HB0_B"
+	PIN 80: "WF0_HB5"
+	PIN 81: "WF0_HB6"
+	PIN 82: "WF0_HB7"
+	PIN 83: "WF0_HB8"
+	PIN 84: "WF0_HB9"
+	PIN 85: "WF0_HB10"
+	PIN 86: "WF1_DIG_RESETB"
+	PIN 87: "WF1_CBA_RESETB"
+	PIN 88: "WF1_XO_REQ"
+	PIN 89: "WF1_TOP_CLK"
+	PIN 90: "WF1_TOP_DATA"
+	PIN 91: "WF1_HB1"
+	PIN 92: "WF1_HB2"
+	PIN 93: "WF1_HB3"
+	PIN 94: "WF1_HB4"
+	PIN 95: "WF1_HB0"
+	PIN 96: "WF1_HB0_B"
+	PIN 97: "WF1_HB5"
+	PIN 98: "WF1_HB6"
+	PIN 99: "WF1_HB7"
+	PIN 100: "WF1_HB8"
+
+Valid values for function are:
+	"emmc", "eth", "i2c", "wifi", "led", "flash", "pwm", "spi",
+	"uart", "watchdog"
+
+Valid values for groups are:
+additional data is put followingly with valid value allowing us to know which
+applicable function and which relevant pins (in pin#) are able applied for that
+group.
+
+	Valid value			function	pins (in pin#)
+	-------------------------------------------------------------------------
+	"watchdog"			"watchdog"	0
+	"wifi_led"			"led"		1, 2
+	"i2c"				"i2c"		3, 4
+	"uart1_0"			"uart"		7, 8, 9, 10
+	"spi1_0"			"spi"		11, 12, 13, 14
+	"pwm1_1"			"pwm"		20,
+	"pwm0"				"pwm"		21,
+	"pwm1_0"			"pwm"		22,
+	"snfi"				"flash"		23, 24, 25, 26, 27, 28
+	"spi1_2"			"spi"		29, 30, 31, 32
+	"emmc_45"			"emmc"		22, 23, 24, 25, 26, 27,
+							28, 29, 30, 31, 32
+	"spi1_1"			"spi"		23, 24, 25, 26
+	"uart1_2"			"uart"		29, 30, 31, 32
+	"uart1_1"			"uart"		23, 24, 25, 26
+	"uart2_0"			"uart"		29, 30, 31, 32
+	"spi0"				"spi"		33, 34, 35, 36
+	"spi0_wp_hold"			"spi"		37, 38
+	"uart1_3_rx_tx"			"uart"		35, 36
+	"uart1_3_cts_rts"		"uart"		37, 38
+	"uart2_1"			"uart"		33, 34, 35, 36
+	"spi1_3"			"spi"		33, 34, 35, 36
+	"switch_int"			"eth"		66
+	"mdc_mdio"			"eth"		67
+
+
 Example:
 
 	pio: pinctrl@10211000 {
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH 06/12] pinctrl: mediatek: add support for MT7986 SoC
  2021-07-26  7:14 [PATCH 00/12] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (4 preceding siblings ...)
  2021-07-26  7:14 ` [PATCH 05/12] dt-bindings: pinctrl: update bindings for MT7986 SoC Sam Shih
@ 2021-07-26  7:14 ` Sam Shih
  2021-07-26  7:14 ` [PATCH 07/12] dt-bindings: arm64: dts: mediatek: Add mt7986 series Sam Shih
                   ` (5 subsequent siblings)
  11 siblings, 0 replies; 26+ messages in thread
From: Sam Shih @ 2021-07-26  7:14 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

This commit includes pinctrl driver for Mediatek MT7986

The difference of pinctrl between mt7986a and mt7986b
is that pin-41 to pin-65 do not exist on mt7986b

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 drivers/pinctrl/mediatek/Kconfig          |    7 +
 drivers/pinctrl/mediatek/Makefile         |    1 +
 drivers/pinctrl/mediatek/pinctrl-mt7986.c | 1640 +++++++++++++++++++++
 3 files changed, 1648 insertions(+)
 create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt7986.c

diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig
index 7040a7a7bd5d..66db4ac5d169 100644
--- a/drivers/pinctrl/mediatek/Kconfig
+++ b/drivers/pinctrl/mediatek/Kconfig
@@ -119,6 +119,13 @@ config PINCTRL_MT7622
 	default ARM64 && ARCH_MEDIATEK
 	select PINCTRL_MTK_MOORE
 
+config PINCTRL_MT7986
+	bool "Mediatek MT7986 pin control"
+	depends on OF
+	depends on ARM64 || COMPILE_TEST
+	default ARM64 && ARCH_MEDIATEK
+	select PINCTRL_MTK_MOORE
+
 config PINCTRL_MT8167
 	bool "Mediatek MT8167 pin control"
 	depends on OF
diff --git a/drivers/pinctrl/mediatek/Makefile b/drivers/pinctrl/mediatek/Makefile
index 1bb7f9c65bc2..1e3931d924e7 100644
--- a/drivers/pinctrl/mediatek/Makefile
+++ b/drivers/pinctrl/mediatek/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_PINCTRL_MT6797)	+= pinctrl-mt6797.o
 obj-$(CONFIG_PINCTRL_MT7622)	+= pinctrl-mt7622.o
 obj-$(CONFIG_PINCTRL_MT7623)	+= pinctrl-mt7623.o
 obj-$(CONFIG_PINCTRL_MT7629)	+= pinctrl-mt7629.o
+obj-$(CONFIG_PINCTRL_MT7986)	+= pinctrl-mt7986.o
 obj-$(CONFIG_PINCTRL_MT8167)	+= pinctrl-mt8167.o
 obj-$(CONFIG_PINCTRL_MT8173)	+= pinctrl-mt8173.o
 obj-$(CONFIG_PINCTRL_MT8183)	+= pinctrl-mt8183.o
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt7986.c b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
new file mode 100644
index 000000000000..1cccef2b5405
--- /dev/null
+++ b/drivers/pinctrl/mediatek/pinctrl-mt7986.c
@@ -0,0 +1,1640 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * The MT7986 driver based on Linux generic pinctrl binding.
+ *
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam Shih <sam.shih@mediatek.com>
+ */
+
+#include "pinctrl-moore.h"
+
+#define MT7986_PIN(_number, _name) MTK_PIN(_number, _name, 0, _number, DRV_GRP4)
+
+#define PIN_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit,	\
+			   _x_bits)														\
+	PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit,		\
+			   _x_bits, 32, 0)
+
+/**
+ * enum - Locking variants of the iocfg bases
+ *
+ * MT7986 have multiple bases to program pin configuration listed as the below:
+ * iocfg_rt:0x11c30000, iocfg_rb:0x11c40000, iocfg_lt:0x11e20000,
+ * iocfg_lb:0x11e30000, iocfg_tr:0x11f00000, iocfg_tl:0x11f10000,
+ * _i_based could be used to indicate what base the pin should be mapped into.
+ *
+ * Each iocfg register base control different group of pads on the SoC
+ *
+ *
+ *  chip carrier
+ *
+ *      A  B  C  D  E  F  G  H
+ *    +------------------------+
+ *  8 | o  o  o  o  o  o  o  o |
+ *  7 | o  o  o  o  o  o  o  o |
+ *  6 | o  o  o  o  o  o  o  o |
+ *  5 | o  o  o  o  o  o  o  o |
+ *  4 | o  o  o  o  o  o  o  o |
+ *  3 | o  o  o  o  o  o  o  o |
+ *  2 | o  o  o  o  o  o  o  o |
+ *  1 | o  o  o  o  o  o  o  o |
+ *    +------------------------+
+ *
+ *  inside Chip carrier
+ *
+ *      A  B  C  D  E  F  G  H
+ *    +------------------------+
+ *  8 |                        |
+ *  7 |        TL  TR          |
+ *  6 |      +---------+       |
+ *  5 |   LT |         | RT    |
+ *  4 |      |         |       |
+ *  3 |   LB |         | RB    |
+ *  2 |      +---------+       |
+ *  1 |                        |
+ *    +------------------------+
+ *
+ */
+
+static const char *const mt7986_pinctrl_register_base_names[] = {
+	"gpio_base", "iocfg_rt_base", "iocfg_rb_base", "iocfg_lt_base",
+	"iocfg_lb_base", "iocfg_tr_base", "iocfg_tl_base",
+};
+
+enum {
+	GPIO_BASE,
+	IOCFG_RT_BASE,
+	IOCFG_RB_BASE,
+	IOCFG_LT_BASE,
+	IOCFG_LB_BASE,
+	IOCFG_TR_BASE,
+	IOCFG_TL_BASE,
+};
+
+static const struct mtk_pin_field_calc mt7986a_pin_mode_range[] = {
+	PIN_FIELD(0, 40, 0x300, 0x10, 0, 4),
+	PIN_FIELD(41, 65, 0x350, 0x10, 4, 4),
+	PIN_FIELD(66, 68, 0x380, 0x10, 8, 4),
+	PIN_FIELD(69, 100, 0x380, 0x10, 20, 4),
+};
+
+static const struct mtk_pin_field_calc mt7986a_pin_dir_range[] = {
+	PIN_FIELD(0, 40, 0x0, 0x10, 0, 1),
+	PIN_FIELD(41, 65, 0x10, 0x10, 9, 1),
+	PIN_FIELD(66, 68, 0x20, 0x10, 2, 1),
+	PIN_FIELD(69, 100, 0x20, 0x10, 5, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986a_pin_di_range[] = {
+	PIN_FIELD(0, 40, 0x200, 0x10, 0, 1),
+	PIN_FIELD(41, 65, 0x210, 0x10, 9, 1),
+	PIN_FIELD(66, 68, 0x220, 0x10, 2, 1),
+	PIN_FIELD(69, 100, 0x220, 0x10, 5, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986a_pin_do_range[] = {
+	PIN_FIELD(0, 40, 0x100, 0x10, 0, 1),
+	PIN_FIELD(41, 65, 0x110, 0x10, 9, 1),
+	PIN_FIELD(66, 68, 0x120, 0x10, 2, 1),
+	PIN_FIELD(69, 100, 0x120, 0x10, 5, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986b_pin_mode_range[] = {
+	PIN_FIELD(0, 40, 0x300, 0x10, 0, 4),
+	PIN_FIELD(66, 68, 0x380, 0x10, 8, 4),
+	PIN_FIELD(69, 100, 0x380, 0x10, 20, 4),
+};
+
+static const struct mtk_pin_field_calc mt7986b_pin_dir_range[] = {
+	PIN_FIELD(0, 40, 0x0, 0x10, 0, 1),
+	PIN_FIELD(66, 68, 0x20, 0x10, 2, 1),
+	PIN_FIELD(69, 100, 0x20, 0x10, 5, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986b_pin_di_range[] = {
+	PIN_FIELD(0, 40, 0x200, 0x10, 0, 1),
+	PIN_FIELD(66, 68, 0x220, 0x10, 2, 1),
+	PIN_FIELD(69, 100, 0x220, 0x10, 5, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986b_pin_do_range[] = {
+	PIN_FIELD(0, 40, 0x100, 0x10, 0, 1),
+	PIN_FIELD(66, 68, 0x120, 0x10, 2, 1),
+	PIN_FIELD(69, 100, 0x120, 0x10, 5, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986a_pin_ies_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x40, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 1, IOCFG_LT_BASE, 0x20, 0x10, 10, 1),
+	PIN_FIELD_BASE(2, 2, IOCFG_LT_BASE, 0x20, 0x10, 11, 1),
+	PIN_FIELD_BASE(3, 3, IOCFG_LB_BASE, 0x20, 0x10, 0, 1),
+	PIN_FIELD_BASE(4, 4, IOCFG_LB_BASE, 0x20, 0x10, 1, 1),
+	PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x40, 0x10, 1, 1),
+	PIN_FIELD_BASE(7, 7, IOCFG_LT_BASE, 0x20, 0x10, 0, 1),
+	PIN_FIELD_BASE(8, 8, IOCFG_LT_BASE, 0x20, 0x10, 1, 1),
+	PIN_FIELD_BASE(9, 9, IOCFG_LT_BASE, 0x20, 0x10, 2, 1),
+	PIN_FIELD_BASE(10, 10, IOCFG_LT_BASE, 0x20, 0x10, 3, 1),
+	PIN_FIELD_BASE(11, 11, IOCFG_RB_BASE, 0x40, 0x10, 8, 1),
+	PIN_FIELD_BASE(12, 12, IOCFG_RB_BASE, 0x40, 0x10, 9, 1),
+	PIN_FIELD_BASE(13, 13, IOCFG_RB_BASE, 0x40, 0x10, 10, 1),
+	PIN_FIELD_BASE(14, 14, IOCFG_RB_BASE, 0x40, 0x10, 11, 1),
+	PIN_FIELD_BASE(15, 15, IOCFG_RB_BASE, 0x40, 0x10, 2, 1),
+	PIN_FIELD_BASE(16, 16, IOCFG_RB_BASE, 0x40, 0x10, 3, 1),
+	PIN_FIELD_BASE(17, 17, IOCFG_RB_BASE, 0x40, 0x10, 4, 1),
+	PIN_FIELD_BASE(18, 18, IOCFG_RB_BASE, 0x40, 0x10, 5, 1),
+	PIN_FIELD_BASE(19, 19, IOCFG_RB_BASE, 0x40, 0x10, 6, 1),
+	PIN_FIELD_BASE(20, 20, IOCFG_RB_BASE, 0x40, 0x10, 7, 1),
+	PIN_FIELD_BASE(21, 21, IOCFG_RT_BASE, 0x30, 0x10, 12, 1),
+	PIN_FIELD_BASE(22, 22, IOCFG_RT_BASE, 0x30, 0x10, 13, 1),
+	PIN_FIELD_BASE(23, 23, IOCFG_RT_BASE, 0x30, 0x10, 14, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x30, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x30, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 26, IOCFG_RT_BASE, 0x30, 0x10, 15, 1),
+	PIN_FIELD_BASE(27, 27, IOCFG_RT_BASE, 0x30, 0x10, 16, 1),
+	PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x30, 0x10, 19, 1),
+	PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x30, 0x10, 20, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x30, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x30, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x30, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x20, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x20, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x20, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 36, IOCFG_LT_BASE, 0x20, 0x10, 5, 1),
+	PIN_FIELD_BASE(37, 37, IOCFG_LT_BASE, 0x20, 0x10, 6, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x20, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x40, 0x10, 18, 1),
+	PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x40, 0x10, 19, 1),
+	PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x40, 0x10, 12, 1),
+	PIN_FIELD_BASE(42, 42, IOCFG_RB_BASE, 0x40, 0x10, 22, 1),
+	PIN_FIELD_BASE(43, 43, IOCFG_RB_BASE, 0x40, 0x10, 23, 1),
+	PIN_FIELD_BASE(44, 44, IOCFG_RB_BASE, 0x40, 0x10, 20, 1),
+	PIN_FIELD_BASE(45, 45, IOCFG_RB_BASE, 0x40, 0x10, 21, 1),
+	PIN_FIELD_BASE(46, 46, IOCFG_RB_BASE, 0x40, 0x10, 26, 1),
+	PIN_FIELD_BASE(47, 47, IOCFG_RB_BASE, 0x40, 0x10, 27, 1),
+	PIN_FIELD_BASE(48, 48, IOCFG_RB_BASE, 0x40, 0x10, 24, 1),
+	PIN_FIELD_BASE(49, 49, IOCFG_RB_BASE, 0x40, 0x10, 25, 1),
+	PIN_FIELD_BASE(50, 50, IOCFG_RT_BASE, 0x30, 0x10, 2, 1),
+	PIN_FIELD_BASE(51, 51, IOCFG_RT_BASE, 0x30, 0x10, 3, 1),
+	PIN_FIELD_BASE(52, 52, IOCFG_RT_BASE, 0x30, 0x10, 4, 1),
+	PIN_FIELD_BASE(53, 53, IOCFG_RT_BASE, 0x30, 0x10, 5, 1),
+	PIN_FIELD_BASE(54, 54, IOCFG_RT_BASE, 0x30, 0x10, 6, 1),
+	PIN_FIELD_BASE(55, 55, IOCFG_RT_BASE, 0x30, 0x10, 7, 1),
+	PIN_FIELD_BASE(56, 56, IOCFG_RT_BASE, 0x30, 0x10, 8, 1),
+	PIN_FIELD_BASE(57, 57, IOCFG_RT_BASE, 0x30, 0x10, 9, 1),
+	PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x30, 0x10, 1, 1),
+	PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x30, 0x10, 0, 1),
+	PIN_FIELD_BASE(60, 60, IOCFG_RT_BASE, 0x30, 0x10, 10, 1),
+	PIN_FIELD_BASE(61, 61, IOCFG_RT_BASE, 0x30, 0x10, 11, 1),
+	PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x40, 0x10, 15, 1),
+	PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x40, 0x10, 14, 1),
+	PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x40, 0x10, 13, 1),
+	PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x40, 0x10, 16, 1),
+	PIN_FIELD_BASE(66, 66, IOCFG_LB_BASE, 0x20, 0x10, 2, 1),
+	PIN_FIELD_BASE(67, 67, IOCFG_LB_BASE, 0x20, 0x10, 3, 1),
+	PIN_FIELD_BASE(68, 68, IOCFG_LB_BASE, 0x20, 0x10, 4, 1),
+	PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x30, 0x10, 1, 1),
+	PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x30, 0x10, 0, 1),
+	PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x30, 0x10, 16, 1),
+	PIN_FIELD_BASE(72, 72, IOCFG_TR_BASE, 0x30, 0x10, 14, 1),
+	PIN_FIELD_BASE(73, 73, IOCFG_TR_BASE, 0x30, 0x10, 15, 1),
+	PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x30, 0x10, 4, 1),
+	PIN_FIELD_BASE(75, 75, IOCFG_TR_BASE, 0x30, 0x10, 6, 1),
+	PIN_FIELD_BASE(76, 76, IOCFG_TR_BASE, 0x30, 0x10, 7, 1),
+	PIN_FIELD_BASE(77, 77, IOCFG_TR_BASE, 0x30, 0x10, 8, 1),
+	PIN_FIELD_BASE(78, 78, IOCFG_TR_BASE, 0x30, 0x10, 2, 1),
+	PIN_FIELD_BASE(79, 79, IOCFG_TR_BASE, 0x30, 0x10, 3, 1),
+	PIN_FIELD_BASE(80, 80, IOCFG_TR_BASE, 0x30, 0x10, 9, 1),
+	PIN_FIELD_BASE(81, 81, IOCFG_TR_BASE, 0x30, 0x10, 10, 1),
+	PIN_FIELD_BASE(82, 82, IOCFG_TR_BASE, 0x30, 0x10, 11, 1),
+	PIN_FIELD_BASE(83, 83, IOCFG_TR_BASE, 0x30, 0x10, 12, 1),
+	PIN_FIELD_BASE(84, 84, IOCFG_TR_BASE, 0x30, 0x10, 13, 1),
+	PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x30, 0x10, 5, 1),
+	PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x30, 0x10, 1, 1),
+	PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x30, 0x10, 0, 1),
+	PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x30, 0x10, 14, 1),
+	PIN_FIELD_BASE(89, 89, IOCFG_TL_BASE, 0x30, 0x10, 12, 1),
+	PIN_FIELD_BASE(90, 90, IOCFG_TL_BASE, 0x30, 0x10, 13, 1),
+	PIN_FIELD_BASE(91, 91, IOCFG_TL_BASE, 0x30, 0x10, 4, 1),
+	PIN_FIELD_BASE(92, 92, IOCFG_TL_BASE, 0x30, 0x10, 5, 1),
+	PIN_FIELD_BASE(93, 93, IOCFG_TL_BASE, 0x30, 0x10, 6, 1),
+	PIN_FIELD_BASE(94, 94, IOCFG_TL_BASE, 0x30, 0x10, 7, 1),
+	PIN_FIELD_BASE(95, 95, IOCFG_TL_BASE, 0x30, 0x10, 2, 1),
+	PIN_FIELD_BASE(96, 96, IOCFG_TL_BASE, 0x30, 0x10, 3, 1),
+	PIN_FIELD_BASE(97, 97, IOCFG_TL_BASE, 0x30, 0x10, 8, 1),
+	PIN_FIELD_BASE(98, 98, IOCFG_TL_BASE, 0x30, 0x10, 9, 1),
+	PIN_FIELD_BASE(99, 99, IOCFG_TL_BASE, 0x30, 0x10, 10, 1),
+	PIN_FIELD_BASE(100, 100, IOCFG_TL_BASE, 0x30, 0x10, 11, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986b_pin_ies_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x40, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 1, IOCFG_LT_BASE, 0x20, 0x10, 10, 1),
+	PIN_FIELD_BASE(2, 2, IOCFG_LT_BASE, 0x20, 0x10, 11, 1),
+	PIN_FIELD_BASE(3, 3, IOCFG_LB_BASE, 0x20, 0x10, 0, 1),
+	PIN_FIELD_BASE(4, 4, IOCFG_LB_BASE, 0x20, 0x10, 1, 1),
+	PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x40, 0x10, 1, 1),
+	PIN_FIELD_BASE(7, 7, IOCFG_LT_BASE, 0x20, 0x10, 0, 1),
+	PIN_FIELD_BASE(8, 8, IOCFG_LT_BASE, 0x20, 0x10, 1, 1),
+	PIN_FIELD_BASE(9, 9, IOCFG_LT_BASE, 0x20, 0x10, 2, 1),
+	PIN_FIELD_BASE(10, 10, IOCFG_LT_BASE, 0x20, 0x10, 3, 1),
+	PIN_FIELD_BASE(11, 11, IOCFG_RB_BASE, 0x40, 0x10, 8, 1),
+	PIN_FIELD_BASE(12, 12, IOCFG_RB_BASE, 0x40, 0x10, 9, 1),
+	PIN_FIELD_BASE(13, 13, IOCFG_RB_BASE, 0x40, 0x10, 10, 1),
+	PIN_FIELD_BASE(14, 14, IOCFG_RB_BASE, 0x40, 0x10, 11, 1),
+	PIN_FIELD_BASE(15, 15, IOCFG_RB_BASE, 0x40, 0x10, 2, 1),
+	PIN_FIELD_BASE(16, 16, IOCFG_RB_BASE, 0x40, 0x10, 3, 1),
+	PIN_FIELD_BASE(17, 17, IOCFG_RB_BASE, 0x40, 0x10, 4, 1),
+	PIN_FIELD_BASE(18, 18, IOCFG_RB_BASE, 0x40, 0x10, 5, 1),
+	PIN_FIELD_BASE(19, 19, IOCFG_RB_BASE, 0x40, 0x10, 6, 1),
+	PIN_FIELD_BASE(20, 20, IOCFG_RB_BASE, 0x40, 0x10, 7, 1),
+	PIN_FIELD_BASE(21, 21, IOCFG_RT_BASE, 0x30, 0x10, 12, 1),
+	PIN_FIELD_BASE(22, 22, IOCFG_RT_BASE, 0x30, 0x10, 13, 1),
+	PIN_FIELD_BASE(23, 23, IOCFG_RT_BASE, 0x30, 0x10, 14, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x30, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x30, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 26, IOCFG_RT_BASE, 0x30, 0x10, 15, 1),
+	PIN_FIELD_BASE(27, 27, IOCFG_RT_BASE, 0x30, 0x10, 16, 1),
+	PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x30, 0x10, 19, 1),
+	PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x30, 0x10, 20, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x30, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x30, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x30, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x20, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x20, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x20, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 36, IOCFG_LT_BASE, 0x20, 0x10, 5, 1),
+	PIN_FIELD_BASE(37, 37, IOCFG_LT_BASE, 0x20, 0x10, 6, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x20, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x40, 0x10, 18, 1),
+	PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x40, 0x10, 19, 1),
+	PIN_FIELD_BASE(66, 66, IOCFG_LB_BASE, 0x20, 0x10, 2, 1),
+	PIN_FIELD_BASE(67, 67, IOCFG_LB_BASE, 0x20, 0x10, 3, 1),
+	PIN_FIELD_BASE(68, 68, IOCFG_LB_BASE, 0x20, 0x10, 4, 1),
+	PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x30, 0x10, 1, 1),
+	PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x30, 0x10, 0, 1),
+	PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x30, 0x10, 16, 1),
+	PIN_FIELD_BASE(72, 72, IOCFG_TR_BASE, 0x30, 0x10, 14, 1),
+	PIN_FIELD_BASE(73, 73, IOCFG_TR_BASE, 0x30, 0x10, 15, 1),
+	PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x30, 0x10, 4, 1),
+	PIN_FIELD_BASE(75, 75, IOCFG_TR_BASE, 0x30, 0x10, 6, 1),
+	PIN_FIELD_BASE(76, 76, IOCFG_TR_BASE, 0x30, 0x10, 7, 1),
+	PIN_FIELD_BASE(77, 77, IOCFG_TR_BASE, 0x30, 0x10, 8, 1),
+	PIN_FIELD_BASE(78, 78, IOCFG_TR_BASE, 0x30, 0x10, 2, 1),
+	PIN_FIELD_BASE(79, 79, IOCFG_TR_BASE, 0x30, 0x10, 3, 1),
+	PIN_FIELD_BASE(80, 80, IOCFG_TR_BASE, 0x30, 0x10, 9, 1),
+	PIN_FIELD_BASE(81, 81, IOCFG_TR_BASE, 0x30, 0x10, 10, 1),
+	PIN_FIELD_BASE(82, 82, IOCFG_TR_BASE, 0x30, 0x10, 11, 1),
+	PIN_FIELD_BASE(83, 83, IOCFG_TR_BASE, 0x30, 0x10, 12, 1),
+	PIN_FIELD_BASE(84, 84, IOCFG_TR_BASE, 0x30, 0x10, 13, 1),
+	PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x30, 0x10, 5, 1),
+	PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x30, 0x10, 1, 1),
+	PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x30, 0x10, 0, 1),
+	PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x30, 0x10, 14, 1),
+	PIN_FIELD_BASE(89, 89, IOCFG_TL_BASE, 0x30, 0x10, 12, 1),
+	PIN_FIELD_BASE(90, 90, IOCFG_TL_BASE, 0x30, 0x10, 13, 1),
+	PIN_FIELD_BASE(91, 91, IOCFG_TL_BASE, 0x30, 0x10, 4, 1),
+	PIN_FIELD_BASE(92, 92, IOCFG_TL_BASE, 0x30, 0x10, 5, 1),
+	PIN_FIELD_BASE(93, 93, IOCFG_TL_BASE, 0x30, 0x10, 6, 1),
+	PIN_FIELD_BASE(94, 94, IOCFG_TL_BASE, 0x30, 0x10, 7, 1),
+	PIN_FIELD_BASE(95, 95, IOCFG_TL_BASE, 0x30, 0x10, 2, 1),
+	PIN_FIELD_BASE(96, 96, IOCFG_TL_BASE, 0x30, 0x10, 3, 1),
+	PIN_FIELD_BASE(97, 97, IOCFG_TL_BASE, 0x30, 0x10, 8, 1),
+	PIN_FIELD_BASE(98, 98, IOCFG_TL_BASE, 0x30, 0x10, 9, 1),
+	PIN_FIELD_BASE(99, 99, IOCFG_TL_BASE, 0x30, 0x10, 10, 1),
+	PIN_FIELD_BASE(100, 100, IOCFG_TL_BASE, 0x30, 0x10, 11, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986a_pin_smt_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0xf0, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 1, IOCFG_LT_BASE, 0x90, 0x10, 10, 1),
+	PIN_FIELD_BASE(2, 2, IOCFG_LT_BASE, 0x90, 0x10, 11, 1),
+	PIN_FIELD_BASE(3, 3, IOCFG_LB_BASE, 0x90, 0x10, 0, 1),
+	PIN_FIELD_BASE(4, 4, IOCFG_LB_BASE, 0x90, 0x10, 1, 1),
+	PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0xf0, 0x10, 0, 1),
+	PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0xf0, 0x10, 1, 1),
+	PIN_FIELD_BASE(7, 7, IOCFG_LT_BASE, 0x90, 0x10, 0, 1),
+	PIN_FIELD_BASE(8, 8, IOCFG_LT_BASE, 0x90, 0x10, 1, 1),
+	PIN_FIELD_BASE(9, 9, IOCFG_LT_BASE, 0x90, 0x10, 2, 1),
+	PIN_FIELD_BASE(10, 10, IOCFG_LT_BASE, 0x90, 0x10, 3, 1),
+	PIN_FIELD_BASE(11, 11, IOCFG_RB_BASE, 0xf0, 0x10, 8, 1),
+	PIN_FIELD_BASE(12, 12, IOCFG_RB_BASE, 0xf0, 0x10, 9, 1),
+	PIN_FIELD_BASE(13, 13, IOCFG_RB_BASE, 0xf0, 0x10, 10, 1),
+	PIN_FIELD_BASE(14, 14, IOCFG_RB_BASE, 0xf0, 0x10, 11, 1),
+	PIN_FIELD_BASE(15, 15, IOCFG_RB_BASE, 0xf0, 0x10, 2, 1),
+	PIN_FIELD_BASE(16, 16, IOCFG_RB_BASE, 0xf0, 0x10, 3, 1),
+	PIN_FIELD_BASE(17, 17, IOCFG_RB_BASE, 0xf0, 0x10, 4, 1),
+	PIN_FIELD_BASE(18, 18, IOCFG_RB_BASE, 0xf0, 0x10, 5, 1),
+	PIN_FIELD_BASE(19, 19, IOCFG_RB_BASE, 0xf0, 0x10, 6, 1),
+	PIN_FIELD_BASE(20, 20, IOCFG_RB_BASE, 0xf0, 0x10, 7, 1),
+	PIN_FIELD_BASE(21, 21, IOCFG_RT_BASE, 0xc0, 0x10, 12, 1),
+	PIN_FIELD_BASE(22, 22, IOCFG_RT_BASE, 0xc0, 0x10, 13, 1),
+	PIN_FIELD_BASE(23, 23, IOCFG_RT_BASE, 0xc0, 0x10, 14, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0xc0, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0xc0, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 26, IOCFG_RT_BASE, 0xc0, 0x10, 15, 1),
+	PIN_FIELD_BASE(27, 27, IOCFG_RT_BASE, 0xc0, 0x10, 16, 1),
+	PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0xc0, 0x10, 19, 1),
+	PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0xc0, 0x10, 20, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0xc0, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0xc0, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0xc0, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x90, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x90, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x90, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 36, IOCFG_LT_BASE, 0x90, 0x10, 5, 1),
+	PIN_FIELD_BASE(37, 37, IOCFG_LT_BASE, 0x90, 0x10, 6, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x90, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0xf0, 0x10, 18, 1),
+	PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0xf0, 0x10, 19, 1),
+	PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0xf0, 0x10, 12, 1),
+	PIN_FIELD_BASE(42, 42, IOCFG_RB_BASE, 0xf0, 0x10, 22, 1),
+	PIN_FIELD_BASE(43, 43, IOCFG_RB_BASE, 0xf0, 0x10, 23, 1),
+	PIN_FIELD_BASE(44, 44, IOCFG_RB_BASE, 0xf0, 0x10, 20, 1),
+	PIN_FIELD_BASE(45, 45, IOCFG_RB_BASE, 0xf0, 0x10, 21, 1),
+	PIN_FIELD_BASE(46, 46, IOCFG_RB_BASE, 0xf0, 0x10, 26, 1),
+	PIN_FIELD_BASE(47, 47, IOCFG_RB_BASE, 0xf0, 0x10, 27, 1),
+	PIN_FIELD_BASE(48, 48, IOCFG_RB_BASE, 0xf0, 0x10, 24, 1),
+	PIN_FIELD_BASE(49, 49, IOCFG_RB_BASE, 0xf0, 0x10, 25, 1),
+	PIN_FIELD_BASE(50, 50, IOCFG_RT_BASE, 0xc0, 0x10, 2, 1),
+	PIN_FIELD_BASE(51, 51, IOCFG_RT_BASE, 0xc0, 0x10, 3, 1),
+	PIN_FIELD_BASE(52, 52, IOCFG_RT_BASE, 0xc0, 0x10, 4, 1),
+	PIN_FIELD_BASE(53, 53, IOCFG_RT_BASE, 0xc0, 0x10, 5, 1),
+	PIN_FIELD_BASE(54, 54, IOCFG_RT_BASE, 0xc0, 0x10, 6, 1),
+	PIN_FIELD_BASE(55, 55, IOCFG_RT_BASE, 0xc0, 0x10, 7, 1),
+	PIN_FIELD_BASE(56, 56, IOCFG_RT_BASE, 0xc0, 0x10, 8, 1),
+	PIN_FIELD_BASE(57, 57, IOCFG_RT_BASE, 0xc0, 0x10, 9, 1),
+	PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0xc0, 0x10, 1, 1),
+	PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0xc0, 0x10, 0, 1),
+	PIN_FIELD_BASE(60, 60, IOCFG_RT_BASE, 0xc0, 0x10, 10, 1),
+	PIN_FIELD_BASE(61, 61, IOCFG_RT_BASE, 0xc0, 0x10, 11, 1),
+	PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0xf0, 0x10, 15, 1),
+	PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0xf0, 0x10, 14, 1),
+	PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0xf0, 0x10, 13, 1),
+	PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0xf0, 0x10, 16, 1),
+	PIN_FIELD_BASE(66, 66, IOCFG_LB_BASE, 0x90, 0x10, 2, 1),
+	PIN_FIELD_BASE(67, 67, IOCFG_LB_BASE, 0x90, 0x10, 3, 1),
+	PIN_FIELD_BASE(68, 68, IOCFG_LB_BASE, 0x90, 0x10, 4, 1),
+	PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x80, 0x10, 1, 1),
+	PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x80, 0x10, 0, 1),
+	PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x80, 0x10, 16, 1),
+	PIN_FIELD_BASE(72, 72, IOCFG_TR_BASE, 0x80, 0x10, 14, 1),
+	PIN_FIELD_BASE(73, 73, IOCFG_TR_BASE, 0x80, 0x10, 15, 1),
+	PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x80, 0x10, 4, 1),
+	PIN_FIELD_BASE(75, 75, IOCFG_TR_BASE, 0x80, 0x10, 6, 1),
+	PIN_FIELD_BASE(76, 76, IOCFG_TR_BASE, 0x80, 0x10, 7, 1),
+	PIN_FIELD_BASE(77, 77, IOCFG_TR_BASE, 0x80, 0x10, 8, 1),
+	PIN_FIELD_BASE(78, 78, IOCFG_TR_BASE, 0x80, 0x10, 2, 1),
+	PIN_FIELD_BASE(79, 79, IOCFG_TR_BASE, 0x80, 0x10, 3, 1),
+	PIN_FIELD_BASE(80, 80, IOCFG_TR_BASE, 0x80, 0x10, 9, 1),
+	PIN_FIELD_BASE(81, 81, IOCFG_TR_BASE, 0x80, 0x10, 10, 1),
+	PIN_FIELD_BASE(82, 82, IOCFG_TR_BASE, 0x80, 0x10, 11, 1),
+	PIN_FIELD_BASE(83, 83, IOCFG_TR_BASE, 0x80, 0x10, 12, 1),
+	PIN_FIELD_BASE(84, 84, IOCFG_TR_BASE, 0x80, 0x10, 13, 1),
+	PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x80, 0x10, 5, 1),
+	PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x70, 0x10, 1, 1),
+	PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x70, 0x10, 0, 1),
+	PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x70, 0x10, 14, 1),
+	PIN_FIELD_BASE(89, 89, IOCFG_TL_BASE, 0x70, 0x10, 12, 1),
+	PIN_FIELD_BASE(90, 90, IOCFG_TL_BASE, 0x70, 0x10, 13, 1),
+	PIN_FIELD_BASE(91, 91, IOCFG_TL_BASE, 0x70, 0x10, 4, 1),
+	PIN_FIELD_BASE(92, 92, IOCFG_TL_BASE, 0x70, 0x10, 5, 1),
+	PIN_FIELD_BASE(93, 93, IOCFG_TL_BASE, 0x70, 0x10, 6, 1),
+	PIN_FIELD_BASE(94, 94, IOCFG_TL_BASE, 0x70, 0x10, 7, 1),
+	PIN_FIELD_BASE(95, 95, IOCFG_TL_BASE, 0x70, 0x10, 2, 1),
+	PIN_FIELD_BASE(96, 96, IOCFG_TL_BASE, 0x70, 0x10, 3, 1),
+	PIN_FIELD_BASE(97, 97, IOCFG_TL_BASE, 0x70, 0x10, 8, 1),
+	PIN_FIELD_BASE(98, 98, IOCFG_TL_BASE, 0x70, 0x10, 9, 1),
+	PIN_FIELD_BASE(99, 99, IOCFG_TL_BASE, 0x70, 0x10, 10, 1),
+	PIN_FIELD_BASE(100, 100, IOCFG_TL_BASE, 0x70, 0x10, 11, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986b_pin_smt_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0xf0, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 1, IOCFG_LT_BASE, 0x90, 0x10, 10, 1),
+	PIN_FIELD_BASE(2, 2, IOCFG_LT_BASE, 0x90, 0x10, 11, 1),
+	PIN_FIELD_BASE(3, 3, IOCFG_LB_BASE, 0x90, 0x10, 0, 1),
+	PIN_FIELD_BASE(4, 4, IOCFG_LB_BASE, 0x90, 0x10, 1, 1),
+	PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0xf0, 0x10, 0, 1),
+	PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0xf0, 0x10, 1, 1),
+	PIN_FIELD_BASE(7, 7, IOCFG_LT_BASE, 0x90, 0x10, 0, 1),
+	PIN_FIELD_BASE(8, 8, IOCFG_LT_BASE, 0x90, 0x10, 1, 1),
+	PIN_FIELD_BASE(9, 9, IOCFG_LT_BASE, 0x90, 0x10, 2, 1),
+	PIN_FIELD_BASE(10, 10, IOCFG_LT_BASE, 0x90, 0x10, 3, 1),
+	PIN_FIELD_BASE(11, 11, IOCFG_RB_BASE, 0xf0, 0x10, 8, 1),
+	PIN_FIELD_BASE(12, 12, IOCFG_RB_BASE, 0xf0, 0x10, 9, 1),
+	PIN_FIELD_BASE(13, 13, IOCFG_RB_BASE, 0xf0, 0x10, 10, 1),
+	PIN_FIELD_BASE(14, 14, IOCFG_RB_BASE, 0xf0, 0x10, 11, 1),
+	PIN_FIELD_BASE(15, 15, IOCFG_RB_BASE, 0xf0, 0x10, 2, 1),
+	PIN_FIELD_BASE(16, 16, IOCFG_RB_BASE, 0xf0, 0x10, 3, 1),
+	PIN_FIELD_BASE(17, 17, IOCFG_RB_BASE, 0xf0, 0x10, 4, 1),
+	PIN_FIELD_BASE(18, 18, IOCFG_RB_BASE, 0xf0, 0x10, 5, 1),
+	PIN_FIELD_BASE(19, 19, IOCFG_RB_BASE, 0xf0, 0x10, 6, 1),
+	PIN_FIELD_BASE(20, 20, IOCFG_RB_BASE, 0xf0, 0x10, 7, 1),
+	PIN_FIELD_BASE(21, 21, IOCFG_RT_BASE, 0xc0, 0x10, 12, 1),
+	PIN_FIELD_BASE(22, 22, IOCFG_RT_BASE, 0xc0, 0x10, 13, 1),
+	PIN_FIELD_BASE(23, 23, IOCFG_RT_BASE, 0xc0, 0x10, 14, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0xc0, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0xc0, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 26, IOCFG_RT_BASE, 0xc0, 0x10, 15, 1),
+	PIN_FIELD_BASE(27, 27, IOCFG_RT_BASE, 0xc0, 0x10, 16, 1),
+	PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0xc0, 0x10, 19, 1),
+	PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0xc0, 0x10, 20, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0xc0, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0xc0, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0xc0, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x90, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x90, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x90, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 36, IOCFG_LT_BASE, 0x90, 0x10, 5, 1),
+	PIN_FIELD_BASE(37, 37, IOCFG_LT_BASE, 0x90, 0x10, 6, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x90, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0xf0, 0x10, 18, 1),
+	PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0xf0, 0x10, 19, 1),
+	PIN_FIELD_BASE(66, 66, IOCFG_LB_BASE, 0x90, 0x10, 2, 1),
+	PIN_FIELD_BASE(67, 67, IOCFG_LB_BASE, 0x90, 0x10, 3, 1),
+	PIN_FIELD_BASE(68, 68, IOCFG_LB_BASE, 0x90, 0x10, 4, 1),
+	PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x80, 0x10, 1, 1),
+	PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x80, 0x10, 0, 1),
+	PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x80, 0x10, 16, 1),
+	PIN_FIELD_BASE(72, 72, IOCFG_TR_BASE, 0x80, 0x10, 14, 1),
+	PIN_FIELD_BASE(73, 73, IOCFG_TR_BASE, 0x80, 0x10, 15, 1),
+	PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x80, 0x10, 4, 1),
+	PIN_FIELD_BASE(75, 75, IOCFG_TR_BASE, 0x80, 0x10, 6, 1),
+	PIN_FIELD_BASE(76, 76, IOCFG_TR_BASE, 0x80, 0x10, 7, 1),
+	PIN_FIELD_BASE(77, 77, IOCFG_TR_BASE, 0x80, 0x10, 8, 1),
+	PIN_FIELD_BASE(78, 78, IOCFG_TR_BASE, 0x80, 0x10, 2, 1),
+	PIN_FIELD_BASE(79, 79, IOCFG_TR_BASE, 0x80, 0x10, 3, 1),
+	PIN_FIELD_BASE(80, 80, IOCFG_TR_BASE, 0x80, 0x10, 9, 1),
+	PIN_FIELD_BASE(81, 81, IOCFG_TR_BASE, 0x80, 0x10, 10, 1),
+	PIN_FIELD_BASE(82, 82, IOCFG_TR_BASE, 0x80, 0x10, 11, 1),
+	PIN_FIELD_BASE(83, 83, IOCFG_TR_BASE, 0x80, 0x10, 12, 1),
+	PIN_FIELD_BASE(84, 84, IOCFG_TR_BASE, 0x80, 0x10, 13, 1),
+	PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x80, 0x10, 5, 1),
+	PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x70, 0x10, 1, 1),
+	PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x70, 0x10, 0, 1),
+	PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x70, 0x10, 14, 1),
+	PIN_FIELD_BASE(89, 89, IOCFG_TL_BASE, 0x70, 0x10, 12, 1),
+	PIN_FIELD_BASE(90, 90, IOCFG_TL_BASE, 0x70, 0x10, 13, 1),
+	PIN_FIELD_BASE(91, 91, IOCFG_TL_BASE, 0x70, 0x10, 4, 1),
+	PIN_FIELD_BASE(92, 92, IOCFG_TL_BASE, 0x70, 0x10, 5, 1),
+	PIN_FIELD_BASE(93, 93, IOCFG_TL_BASE, 0x70, 0x10, 6, 1),
+	PIN_FIELD_BASE(94, 94, IOCFG_TL_BASE, 0x70, 0x10, 7, 1),
+	PIN_FIELD_BASE(95, 95, IOCFG_TL_BASE, 0x70, 0x10, 2, 1),
+	PIN_FIELD_BASE(96, 96, IOCFG_TL_BASE, 0x70, 0x10, 3, 1),
+	PIN_FIELD_BASE(97, 97, IOCFG_TL_BASE, 0x70, 0x10, 8, 1),
+	PIN_FIELD_BASE(98, 98, IOCFG_TL_BASE, 0x70, 0x10, 9, 1),
+	PIN_FIELD_BASE(99, 99, IOCFG_TL_BASE, 0x70, 0x10, 10, 1),
+	PIN_FIELD_BASE(100, 100, IOCFG_TL_BASE, 0x70, 0x10, 11, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pu_range[] = {
+	PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x50, 0x10, 1, 1),
+	PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x50, 0x10, 0, 1),
+	PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x50, 0x10, 16, 1),
+	PIN_FIELD_BASE(72, 72, IOCFG_TR_BASE, 0x50, 0x10, 14, 1),
+	PIN_FIELD_BASE(73, 73, IOCFG_TR_BASE, 0x50, 0x10, 15, 1),
+	PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x50, 0x10, 4, 1),
+	PIN_FIELD_BASE(75, 75, IOCFG_TR_BASE, 0x50, 0x10, 6, 1),
+	PIN_FIELD_BASE(76, 76, IOCFG_TR_BASE, 0x50, 0x10, 7, 1),
+	PIN_FIELD_BASE(77, 77, IOCFG_TR_BASE, 0x50, 0x10, 8, 1),
+	PIN_FIELD_BASE(78, 78, IOCFG_TR_BASE, 0x50, 0x10, 2, 1),
+	PIN_FIELD_BASE(79, 79, IOCFG_TR_BASE, 0x50, 0x10, 3, 1),
+	PIN_FIELD_BASE(80, 80, IOCFG_TR_BASE, 0x50, 0x10, 9, 1),
+	PIN_FIELD_BASE(81, 81, IOCFG_TR_BASE, 0x50, 0x10, 10, 1),
+	PIN_FIELD_BASE(82, 82, IOCFG_TR_BASE, 0x50, 0x10, 11, 1),
+	PIN_FIELD_BASE(83, 83, IOCFG_TR_BASE, 0x50, 0x10, 12, 1),
+	PIN_FIELD_BASE(84, 84, IOCFG_TR_BASE, 0x50, 0x10, 13, 1),
+	PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x50, 0x10, 5, 1),
+	PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x50, 0x10, 1, 1),
+	PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x50, 0x10, 0, 1),
+	PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x50, 0x10, 14, 1),
+	PIN_FIELD_BASE(89, 89, IOCFG_TL_BASE, 0x50, 0x10, 12, 1),
+	PIN_FIELD_BASE(90, 90, IOCFG_TL_BASE, 0x50, 0x10, 13, 1),
+	PIN_FIELD_BASE(91, 91, IOCFG_TL_BASE, 0x50, 0x10, 4, 1),
+	PIN_FIELD_BASE(92, 92, IOCFG_TL_BASE, 0x50, 0x10, 5, 1),
+	PIN_FIELD_BASE(93, 93, IOCFG_TL_BASE, 0x50, 0x10, 6, 1),
+	PIN_FIELD_BASE(94, 94, IOCFG_TL_BASE, 0x50, 0x10, 7, 1),
+	PIN_FIELD_BASE(95, 95, IOCFG_TL_BASE, 0x50, 0x10, 2, 1),
+	PIN_FIELD_BASE(96, 96, IOCFG_TL_BASE, 0x50, 0x10, 3, 1),
+	PIN_FIELD_BASE(97, 97, IOCFG_TL_BASE, 0x50, 0x10, 8, 1),
+	PIN_FIELD_BASE(98, 98, IOCFG_TL_BASE, 0x50, 0x10, 9, 1),
+	PIN_FIELD_BASE(99, 99, IOCFG_TL_BASE, 0x50, 0x10, 10, 1),
+	PIN_FIELD_BASE(100, 100, IOCFG_TL_BASE, 0x50, 0x10, 11, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986_pin_pd_range[] = {
+	PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x40, 0x10, 1, 1),
+	PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x40, 0x10, 16, 1),
+	PIN_FIELD_BASE(72, 72, IOCFG_TR_BASE, 0x40, 0x10, 14, 1),
+	PIN_FIELD_BASE(73, 73, IOCFG_TR_BASE, 0x40, 0x10, 15, 1),
+	PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x40, 0x10, 4, 1),
+	PIN_FIELD_BASE(75, 75, IOCFG_TR_BASE, 0x40, 0x10, 6, 1),
+	PIN_FIELD_BASE(76, 76, IOCFG_TR_BASE, 0x40, 0x10, 7, 1),
+	PIN_FIELD_BASE(77, 77, IOCFG_TR_BASE, 0x40, 0x10, 8, 1),
+	PIN_FIELD_BASE(78, 78, IOCFG_TR_BASE, 0x40, 0x10, 2, 1),
+	PIN_FIELD_BASE(79, 79, IOCFG_TR_BASE, 0x40, 0x10, 3, 1),
+	PIN_FIELD_BASE(80, 80, IOCFG_TR_BASE, 0x40, 0x10, 9, 1),
+	PIN_FIELD_BASE(81, 81, IOCFG_TR_BASE, 0x40, 0x10, 10, 1),
+	PIN_FIELD_BASE(82, 82, IOCFG_TR_BASE, 0x40, 0x10, 11, 1),
+	PIN_FIELD_BASE(83, 83, IOCFG_TR_BASE, 0x40, 0x10, 12, 1),
+	PIN_FIELD_BASE(84, 84, IOCFG_TR_BASE, 0x40, 0x10, 13, 1),
+	PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x40, 0x10, 5, 1),
+	PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x40, 0x10, 1, 1),
+	PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x40, 0x10, 14, 1),
+	PIN_FIELD_BASE(89, 89, IOCFG_TL_BASE, 0x40, 0x10, 12, 1),
+	PIN_FIELD_BASE(90, 90, IOCFG_TL_BASE, 0x40, 0x10, 13, 1),
+	PIN_FIELD_BASE(91, 91, IOCFG_TL_BASE, 0x40, 0x10, 4, 1),
+	PIN_FIELD_BASE(92, 92, IOCFG_TL_BASE, 0x40, 0x10, 5, 1),
+	PIN_FIELD_BASE(93, 93, IOCFG_TL_BASE, 0x40, 0x10, 6, 1),
+	PIN_FIELD_BASE(94, 94, IOCFG_TL_BASE, 0x40, 0x10, 7, 1),
+	PIN_FIELD_BASE(95, 95, IOCFG_TL_BASE, 0x40, 0x10, 2, 1),
+	PIN_FIELD_BASE(96, 96, IOCFG_TL_BASE, 0x40, 0x10, 3, 1),
+	PIN_FIELD_BASE(97, 97, IOCFG_TL_BASE, 0x40, 0x10, 8, 1),
+	PIN_FIELD_BASE(98, 98, IOCFG_TL_BASE, 0x40, 0x10, 9, 1),
+	PIN_FIELD_BASE(99, 99, IOCFG_TL_BASE, 0x40, 0x10, 10, 1),
+	PIN_FIELD_BASE(100, 100, IOCFG_TL_BASE, 0x40, 0x10, 11, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986a_pin_drv_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x10, 0x10, 21, 3),
+	PIN_FIELD_BASE(1, 1, IOCFG_LT_BASE, 0x10, 0x10, 0, 3),
+	PIN_FIELD_BASE(2, 2, IOCFG_LT_BASE, 0x10, 0x10, 3, 3),
+	PIN_FIELD_BASE(3, 3, IOCFG_LB_BASE, 0x00, 0x10, 0, 1),
+	PIN_FIELD_BASE(4, 4, IOCFG_LB_BASE, 0x00, 0x10, 1, 1),
+	PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x00, 0x10, 21, 3),
+	PIN_FIELD_BASE(7, 7, IOCFG_LT_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(8, 8, IOCFG_LT_BASE, 0x00, 0x10, 3, 3),
+	PIN_FIELD_BASE(9, 9, IOCFG_LT_BASE, 0x00, 0x10, 6, 3),
+	PIN_FIELD_BASE(10, 10, IOCFG_LT_BASE, 0x00, 0x10, 9, 3),
+	PIN_FIELD_BASE(11, 11, IOCFG_RB_BASE, 0x00, 0x10, 24, 3),
+	PIN_FIELD_BASE(12, 12, IOCFG_RB_BASE, 0x00, 0x10, 27, 3),
+	PIN_FIELD_BASE(13, 13, IOCFG_RB_BASE, 0x10, 0x10, 0, 3),
+	PIN_FIELD_BASE(14, 14, IOCFG_RB_BASE, 0x10, 0x10, 3, 3),
+	PIN_FIELD_BASE(15, 15, IOCFG_RB_BASE, 0x00, 0x10, 3, 3),
+	PIN_FIELD_BASE(16, 16, IOCFG_RB_BASE, 0x00, 0x10, 6, 3),
+	PIN_FIELD_BASE(17, 17, IOCFG_RB_BASE, 0x00, 0x10, 9, 3),
+	PIN_FIELD_BASE(18, 18, IOCFG_RB_BASE, 0x00, 0x10, 12, 3),
+	PIN_FIELD_BASE(19, 19, IOCFG_RB_BASE, 0x00, 0x10, 15, 3),
+	PIN_FIELD_BASE(20, 20, IOCFG_RB_BASE, 0x00, 0x10, 18, 3),
+	PIN_FIELD_BASE(21, 21, IOCFG_RT_BASE, 0x10, 0x10, 6, 3),
+	PIN_FIELD_BASE(22, 22, IOCFG_RT_BASE, 0x10, 0x10, 9, 3),
+	PIN_FIELD_BASE(23, 23, IOCFG_RT_BASE, 0x10, 0x10, 12, 3),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x10, 0x10, 24, 3),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x10, 0x10, 21, 3),
+	PIN_FIELD_BASE(26, 26, IOCFG_RT_BASE, 0x10, 0x10, 15, 3),
+	PIN_FIELD_BASE(27, 27, IOCFG_RT_BASE, 0x10, 0x10, 18, 3),
+	PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x10, 0x10, 27, 3),
+	PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x20, 0x10, 0, 3),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x20, 0x10, 9, 3),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x20, 0x10, 6, 3),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x20, 0x10, 3, 3),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x00, 0x10, 12, 3),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x00, 0x10, 24, 3),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x00, 0x10, 21, 3),
+	PIN_FIELD_BASE(36, 36, IOCFG_LT_BASE, 0x00, 0x10, 15, 3),
+	PIN_FIELD_BASE(37, 37, IOCFG_LT_BASE, 0x00, 0x10, 18, 3),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x00, 0x10, 27, 3),
+	PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x10, 0x10, 27, 3),
+	PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x20, 0x10, 0, 3),
+	PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x10, 0x10, 6, 3),
+	PIN_FIELD_BASE(42, 42, IOCFG_RB_BASE, 0x20, 0x10, 9, 3),
+	PIN_FIELD_BASE(43, 43, IOCFG_RB_BASE, 0x20, 0x10, 12, 3),
+	PIN_FIELD_BASE(44, 44, IOCFG_RB_BASE, 0x20, 0x10, 3, 3),
+	PIN_FIELD_BASE(45, 45, IOCFG_RB_BASE, 0x20, 0x10, 6, 3),
+	PIN_FIELD_BASE(46, 46, IOCFG_RB_BASE, 0x20, 0x10, 21, 3),
+	PIN_FIELD_BASE(47, 47, IOCFG_RB_BASE, 0x20, 0x10, 24, 3),
+	PIN_FIELD_BASE(48, 48, IOCFG_RB_BASE, 0x20, 0x10, 15, 3),
+	PIN_FIELD_BASE(49, 49, IOCFG_RB_BASE, 0x20, 0x10, 18, 3),
+	PIN_FIELD_BASE(50, 50, IOCFG_RT_BASE, 0x00, 0x10, 6, 3),
+	PIN_FIELD_BASE(51, 51, IOCFG_RT_BASE, 0x00, 0x10, 9, 3),
+	PIN_FIELD_BASE(52, 52, IOCFG_RT_BASE, 0x00, 0x10, 12, 3),
+	PIN_FIELD_BASE(53, 53, IOCFG_RT_BASE, 0x00, 0x10, 15, 3),
+	PIN_FIELD_BASE(54, 54, IOCFG_RT_BASE, 0x00, 0x10, 18, 3),
+	PIN_FIELD_BASE(55, 55, IOCFG_RT_BASE, 0x00, 0x10, 21, 3),
+	PIN_FIELD_BASE(56, 56, IOCFG_RT_BASE, 0x00, 0x10, 24, 3),
+	PIN_FIELD_BASE(57, 57, IOCFG_RT_BASE, 0x00, 0x10, 27, 3),
+	PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x00, 0x10, 3, 3),
+	PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(60, 60, IOCFG_RT_BASE, 0x10, 0x10, 0, 3),
+	PIN_FIELD_BASE(61, 61, IOCFG_RT_BASE, 0x10, 0x10, 3, 3),
+	PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x10, 0x10, 15, 3),
+	PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x10, 0x10, 12, 3),
+	PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x10, 0x10, 9, 3),
+	PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x10, 0x10, 18, 3),
+	PIN_FIELD_BASE(66, 66, IOCFG_LB_BASE, 0x00, 0x10, 2, 3),
+	PIN_FIELD_BASE(67, 67, IOCFG_LB_BASE, 0x00, 0x10, 5, 3),
+	PIN_FIELD_BASE(68, 68, IOCFG_LB_BASE, 0x00, 0x10, 8, 3),
+	PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x00, 0x10, 3, 3),
+	PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x10, 0x10, 18, 3),
+	PIN_FIELD_BASE(72, 72, IOCFG_TR_BASE, 0x10, 0x10, 12, 3),
+	PIN_FIELD_BASE(73, 73, IOCFG_TR_BASE, 0x10, 0x10, 15, 3),
+	PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x00, 0x10, 15, 3),
+	PIN_FIELD_BASE(75, 75, IOCFG_TR_BASE, 0x00, 0x10, 18, 3),
+	PIN_FIELD_BASE(76, 76, IOCFG_TR_BASE, 0x00, 0x10, 21, 3),
+	PIN_FIELD_BASE(77, 77, IOCFG_TR_BASE, 0x00, 0x10, 24, 3),
+	PIN_FIELD_BASE(78, 78, IOCFG_TR_BASE, 0x00, 0x10, 6, 3),
+	PIN_FIELD_BASE(79, 79, IOCFG_TR_BASE, 0x00, 0x10, 9, 3),
+	PIN_FIELD_BASE(80, 80, IOCFG_TR_BASE, 0x00, 0x10, 27, 3),
+	PIN_FIELD_BASE(81, 81, IOCFG_TR_BASE, 0x10, 0x10, 0, 3),
+	PIN_FIELD_BASE(82, 82, IOCFG_TR_BASE, 0x10, 0x10, 3, 3),
+	PIN_FIELD_BASE(83, 83, IOCFG_TR_BASE, 0x10, 0x10, 6, 3),
+	PIN_FIELD_BASE(84, 84, IOCFG_TR_BASE, 0x10, 0x10, 9, 3),
+	PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x00, 0x10, 12, 3),
+	PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x00, 0x10, 3, 3),
+	PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x10, 0x10, 12, 3),
+	PIN_FIELD_BASE(89, 89, IOCFG_TL_BASE, 0x10, 0x10, 6, 3),
+	PIN_FIELD_BASE(90, 90, IOCFG_TL_BASE, 0x10, 0x10, 9, 3),
+	PIN_FIELD_BASE(91, 91, IOCFG_TL_BASE, 0x00, 0x10, 12, 3),
+	PIN_FIELD_BASE(92, 92, IOCFG_TL_BASE, 0x00, 0x10, 15, 3),
+	PIN_FIELD_BASE(93, 93, IOCFG_TL_BASE, 0x00, 0x10, 18, 3),
+	PIN_FIELD_BASE(94, 94, IOCFG_TL_BASE, 0x00, 0x10, 21, 3),
+	PIN_FIELD_BASE(95, 95, IOCFG_TL_BASE, 0x00, 0x10, 6, 3),
+	PIN_FIELD_BASE(96, 96, IOCFG_TL_BASE, 0x00, 0x10, 9, 3),
+	PIN_FIELD_BASE(97, 97, IOCFG_TL_BASE, 0x00, 0x10, 24, 3),
+	PIN_FIELD_BASE(98, 98, IOCFG_TL_BASE, 0x00, 0x10, 27, 3),
+	PIN_FIELD_BASE(99, 99, IOCFG_TL_BASE, 0x10, 0x10, 2, 3),
+	PIN_FIELD_BASE(100, 100, IOCFG_TL_BASE, 0x10, 0x10, 5, 3),
+};
+
+static const struct mtk_pin_field_calc mt7986b_pin_drv_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x10, 0x10, 21, 3),
+	PIN_FIELD_BASE(1, 1, IOCFG_LT_BASE, 0x10, 0x10, 0, 3),
+	PIN_FIELD_BASE(2, 2, IOCFG_LT_BASE, 0x10, 0x10, 3, 3),
+	PIN_FIELD_BASE(3, 3, IOCFG_LB_BASE, 0x00, 0x10, 0, 1),
+	PIN_FIELD_BASE(4, 4, IOCFG_LB_BASE, 0x00, 0x10, 1, 1),
+	PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x00, 0x10, 21, 3),
+	PIN_FIELD_BASE(7, 7, IOCFG_LT_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(8, 8, IOCFG_LT_BASE, 0x00, 0x10, 3, 3),
+	PIN_FIELD_BASE(9, 9, IOCFG_LT_BASE, 0x00, 0x10, 6, 3),
+	PIN_FIELD_BASE(10, 10, IOCFG_LT_BASE, 0x00, 0x10, 9, 3),
+	PIN_FIELD_BASE(11, 11, IOCFG_RB_BASE, 0x00, 0x10, 24, 3),
+	PIN_FIELD_BASE(12, 12, IOCFG_RB_BASE, 0x00, 0x10, 27, 3),
+	PIN_FIELD_BASE(13, 13, IOCFG_RB_BASE, 0x10, 0x10, 0, 3),
+	PIN_FIELD_BASE(14, 14, IOCFG_RB_BASE, 0x10, 0x10, 3, 3),
+	PIN_FIELD_BASE(15, 15, IOCFG_RB_BASE, 0x00, 0x10, 3, 3),
+	PIN_FIELD_BASE(16, 16, IOCFG_RB_BASE, 0x00, 0x10, 6, 3),
+	PIN_FIELD_BASE(17, 17, IOCFG_RB_BASE, 0x00, 0x10, 9, 3),
+	PIN_FIELD_BASE(18, 18, IOCFG_RB_BASE, 0x00, 0x10, 12, 3),
+	PIN_FIELD_BASE(19, 19, IOCFG_RB_BASE, 0x00, 0x10, 15, 3),
+	PIN_FIELD_BASE(20, 20, IOCFG_RB_BASE, 0x00, 0x10, 18, 3),
+	PIN_FIELD_BASE(21, 21, IOCFG_RT_BASE, 0x10, 0x10, 6, 3),
+	PIN_FIELD_BASE(22, 22, IOCFG_RT_BASE, 0x10, 0x10, 9, 3),
+	PIN_FIELD_BASE(23, 23, IOCFG_RT_BASE, 0x10, 0x10, 12, 3),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x10, 0x10, 24, 3),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x10, 0x10, 21, 3),
+	PIN_FIELD_BASE(26, 26, IOCFG_RT_BASE, 0x10, 0x10, 15, 3),
+	PIN_FIELD_BASE(27, 27, IOCFG_RT_BASE, 0x10, 0x10, 18, 3),
+	PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x10, 0x10, 27, 3),
+	PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x20, 0x10, 0, 3),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x20, 0x10, 9, 3),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x20, 0x10, 6, 3),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x20, 0x10, 3, 3),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x00, 0x10, 12, 3),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x00, 0x10, 24, 3),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x00, 0x10, 21, 3),
+	PIN_FIELD_BASE(36, 36, IOCFG_LT_BASE, 0x00, 0x10, 15, 3),
+	PIN_FIELD_BASE(37, 37, IOCFG_LT_BASE, 0x00, 0x10, 18, 3),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x00, 0x10, 27, 3),
+	PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x10, 0x10, 27, 3),
+	PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x20, 0x10, 0, 3),
+	PIN_FIELD_BASE(66, 66, IOCFG_LB_BASE, 0x00, 0x10, 2, 3),
+	PIN_FIELD_BASE(67, 67, IOCFG_LB_BASE, 0x00, 0x10, 5, 3),
+	PIN_FIELD_BASE(68, 68, IOCFG_LB_BASE, 0x00, 0x10, 8, 3),
+	PIN_FIELD_BASE(69, 69, IOCFG_TR_BASE, 0x00, 0x10, 3, 3),
+	PIN_FIELD_BASE(70, 70, IOCFG_TR_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(71, 71, IOCFG_TR_BASE, 0x10, 0x10, 18, 3),
+	PIN_FIELD_BASE(72, 72, IOCFG_TR_BASE, 0x10, 0x10, 12, 3),
+	PIN_FIELD_BASE(73, 73, IOCFG_TR_BASE, 0x10, 0x10, 15, 3),
+	PIN_FIELD_BASE(74, 74, IOCFG_TR_BASE, 0x00, 0x10, 15, 3),
+	PIN_FIELD_BASE(75, 75, IOCFG_TR_BASE, 0x00, 0x10, 18, 3),
+	PIN_FIELD_BASE(76, 76, IOCFG_TR_BASE, 0x00, 0x10, 21, 3),
+	PIN_FIELD_BASE(77, 77, IOCFG_TR_BASE, 0x00, 0x10, 24, 3),
+	PIN_FIELD_BASE(78, 78, IOCFG_TR_BASE, 0x00, 0x10, 6, 3),
+	PIN_FIELD_BASE(79, 79, IOCFG_TR_BASE, 0x00, 0x10, 9, 3),
+	PIN_FIELD_BASE(80, 80, IOCFG_TR_BASE, 0x00, 0x10, 27, 3),
+	PIN_FIELD_BASE(81, 81, IOCFG_TR_BASE, 0x10, 0x10, 0, 3),
+	PIN_FIELD_BASE(82, 82, IOCFG_TR_BASE, 0x10, 0x10, 3, 3),
+	PIN_FIELD_BASE(83, 83, IOCFG_TR_BASE, 0x10, 0x10, 6, 3),
+	PIN_FIELD_BASE(84, 84, IOCFG_TR_BASE, 0x10, 0x10, 9, 3),
+	PIN_FIELD_BASE(85, 85, IOCFG_TR_BASE, 0x00, 0x10, 12, 3),
+	PIN_FIELD_BASE(86, 86, IOCFG_TL_BASE, 0x00, 0x10, 3, 3),
+	PIN_FIELD_BASE(87, 87, IOCFG_TL_BASE, 0x00, 0x10, 0, 3),
+	PIN_FIELD_BASE(88, 88, IOCFG_TL_BASE, 0x10, 0x10, 12, 3),
+	PIN_FIELD_BASE(89, 89, IOCFG_TL_BASE, 0x10, 0x10, 6, 3),
+	PIN_FIELD_BASE(90, 90, IOCFG_TL_BASE, 0x10, 0x10, 9, 3),
+	PIN_FIELD_BASE(91, 91, IOCFG_TL_BASE, 0x00, 0x10, 12, 3),
+	PIN_FIELD_BASE(92, 92, IOCFG_TL_BASE, 0x00, 0x10, 15, 3),
+	PIN_FIELD_BASE(93, 93, IOCFG_TL_BASE, 0x00, 0x10, 18, 3),
+	PIN_FIELD_BASE(94, 94, IOCFG_TL_BASE, 0x00, 0x10, 21, 3),
+	PIN_FIELD_BASE(95, 95, IOCFG_TL_BASE, 0x00, 0x10, 6, 3),
+	PIN_FIELD_BASE(96, 96, IOCFG_TL_BASE, 0x00, 0x10, 9, 3),
+	PIN_FIELD_BASE(97, 97, IOCFG_TL_BASE, 0x00, 0x10, 24, 3),
+	PIN_FIELD_BASE(98, 98, IOCFG_TL_BASE, 0x00, 0x10, 27, 3),
+	PIN_FIELD_BASE(99, 99, IOCFG_TL_BASE, 0x10, 0x10, 2, 3),
+	PIN_FIELD_BASE(100, 100, IOCFG_TL_BASE, 0x10, 0x10, 5, 3),
+};
+
+static const struct mtk_pin_field_calc mt7986a_pin_pupd_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x60, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 1, IOCFG_LT_BASE, 0x30, 0x10, 10, 1),
+	PIN_FIELD_BASE(2, 2, IOCFG_LT_BASE, 0x30, 0x10, 11, 1),
+	PIN_FIELD_BASE(3, 3, IOCFG_LB_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(4, 4, IOCFG_LB_BASE, 0x40, 0x10, 1, 1),
+	PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x60, 0x10, 0, 1),
+	PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x60, 0x10, 1, 1),
+	PIN_FIELD_BASE(7, 7, IOCFG_LT_BASE, 0x30, 0x10, 0, 1),
+	PIN_FIELD_BASE(8, 8, IOCFG_LT_BASE, 0x30, 0x10, 1, 1),
+	PIN_FIELD_BASE(9, 9, IOCFG_LT_BASE, 0x30, 0x10, 2, 1),
+	PIN_FIELD_BASE(10, 10, IOCFG_LT_BASE, 0x30, 0x10, 3, 1),
+	PIN_FIELD_BASE(11, 11, IOCFG_RB_BASE, 0x60, 0x10, 8, 1),
+	PIN_FIELD_BASE(12, 12, IOCFG_RB_BASE, 0x60, 0x10, 9, 1),
+	PIN_FIELD_BASE(13, 13, IOCFG_RB_BASE, 0x60, 0x10, 10, 1),
+	PIN_FIELD_BASE(14, 14, IOCFG_RB_BASE, 0x60, 0x10, 11, 1),
+	PIN_FIELD_BASE(15, 15, IOCFG_RB_BASE, 0x60, 0x10, 2, 1),
+	PIN_FIELD_BASE(16, 16, IOCFG_RB_BASE, 0x60, 0x10, 3, 1),
+	PIN_FIELD_BASE(17, 17, IOCFG_RB_BASE, 0x60, 0x10, 4, 1),
+	PIN_FIELD_BASE(18, 18, IOCFG_RB_BASE, 0x60, 0x10, 5, 1),
+	PIN_FIELD_BASE(19, 19, IOCFG_RB_BASE, 0x60, 0x10, 6, 1),
+	PIN_FIELD_BASE(20, 20, IOCFG_RB_BASE, 0x60, 0x10, 7, 1),
+	PIN_FIELD_BASE(21, 21, IOCFG_RT_BASE, 0x40, 0x10, 12, 1),
+	PIN_FIELD_BASE(22, 22, IOCFG_RT_BASE, 0x40, 0x10, 13, 1),
+	PIN_FIELD_BASE(23, 23, IOCFG_RT_BASE, 0x40, 0x10, 14, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x40, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x40, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 26, IOCFG_RT_BASE, 0x40, 0x10, 15, 1),
+	PIN_FIELD_BASE(27, 27, IOCFG_RT_BASE, 0x40, 0x10, 16, 1),
+	PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x40, 0x10, 19, 1),
+	PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x40, 0x10, 20, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x40, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x40, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x40, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x30, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x30, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x30, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 36, IOCFG_LT_BASE, 0x30, 0x10, 5, 1),
+	PIN_FIELD_BASE(37, 37, IOCFG_LT_BASE, 0x30, 0x10, 6, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x30, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x60, 0x10, 18, 1),
+	PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x60, 0x10, 19, 1),
+	PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x60, 0x10, 12, 1),
+	PIN_FIELD_BASE(42, 42, IOCFG_RB_BASE, 0x60, 0x10, 22, 1),
+	PIN_FIELD_BASE(43, 43, IOCFG_RB_BASE, 0x60, 0x10, 23, 1),
+	PIN_FIELD_BASE(44, 44, IOCFG_RB_BASE, 0x60, 0x10, 20, 1),
+	PIN_FIELD_BASE(45, 45, IOCFG_RB_BASE, 0x60, 0x10, 21, 1),
+	PIN_FIELD_BASE(46, 46, IOCFG_RB_BASE, 0x60, 0x10, 26, 1),
+	PIN_FIELD_BASE(47, 47, IOCFG_RB_BASE, 0x60, 0x10, 27, 1),
+	PIN_FIELD_BASE(48, 48, IOCFG_RB_BASE, 0x60, 0x10, 24, 1),
+	PIN_FIELD_BASE(49, 49, IOCFG_RB_BASE, 0x60, 0x10, 25, 1),
+	PIN_FIELD_BASE(50, 50, IOCFG_RT_BASE, 0x40, 0x10, 2, 1),
+	PIN_FIELD_BASE(51, 51, IOCFG_RT_BASE, 0x40, 0x10, 3, 1),
+	PIN_FIELD_BASE(52, 52, IOCFG_RT_BASE, 0x40, 0x10, 4, 1),
+	PIN_FIELD_BASE(53, 53, IOCFG_RT_BASE, 0x40, 0x10, 5, 1),
+	PIN_FIELD_BASE(54, 54, IOCFG_RT_BASE, 0x40, 0x10, 6, 1),
+	PIN_FIELD_BASE(55, 55, IOCFG_RT_BASE, 0x40, 0x10, 7, 1),
+	PIN_FIELD_BASE(56, 56, IOCFG_RT_BASE, 0x40, 0x10, 8, 1),
+	PIN_FIELD_BASE(57, 57, IOCFG_RT_BASE, 0x40, 0x10, 9, 1),
+	PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x40, 0x10, 1, 1),
+	PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(60, 60, IOCFG_RT_BASE, 0x40, 0x10, 10, 1),
+	PIN_FIELD_BASE(61, 61, IOCFG_RT_BASE, 0x40, 0x10, 11, 1),
+	PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x60, 0x10, 15, 1),
+	PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x60, 0x10, 14, 1),
+	PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x60, 0x10, 13, 1),
+	PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x60, 0x10, 16, 1),
+	PIN_FIELD_BASE(66, 66, IOCFG_LB_BASE, 0x40, 0x10, 2, 1),
+	PIN_FIELD_BASE(67, 67, IOCFG_LB_BASE, 0x40, 0x10, 3, 1),
+	PIN_FIELD_BASE(68, 68, IOCFG_LB_BASE, 0x40, 0x10, 4, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986b_pin_pupd_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x60, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 1, IOCFG_LT_BASE, 0x30, 0x10, 10, 1),
+	PIN_FIELD_BASE(2, 2, IOCFG_LT_BASE, 0x30, 0x10, 11, 1),
+	PIN_FIELD_BASE(3, 3, IOCFG_LB_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(4, 4, IOCFG_LB_BASE, 0x40, 0x10, 1, 1),
+	PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x60, 0x10, 0, 1),
+	PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x60, 0x10, 1, 1),
+	PIN_FIELD_BASE(7, 7, IOCFG_LT_BASE, 0x30, 0x10, 0, 1),
+	PIN_FIELD_BASE(8, 8, IOCFG_LT_BASE, 0x30, 0x10, 1, 1),
+	PIN_FIELD_BASE(9, 9, IOCFG_LT_BASE, 0x30, 0x10, 2, 1),
+	PIN_FIELD_BASE(10, 10, IOCFG_LT_BASE, 0x30, 0x10, 3, 1),
+	PIN_FIELD_BASE(11, 11, IOCFG_RB_BASE, 0x60, 0x10, 8, 1),
+	PIN_FIELD_BASE(12, 12, IOCFG_RB_BASE, 0x60, 0x10, 9, 1),
+	PIN_FIELD_BASE(13, 13, IOCFG_RB_BASE, 0x60, 0x10, 10, 1),
+	PIN_FIELD_BASE(14, 14, IOCFG_RB_BASE, 0x60, 0x10, 11, 1),
+	PIN_FIELD_BASE(15, 15, IOCFG_RB_BASE, 0x60, 0x10, 2, 1),
+	PIN_FIELD_BASE(16, 16, IOCFG_RB_BASE, 0x60, 0x10, 3, 1),
+	PIN_FIELD_BASE(17, 17, IOCFG_RB_BASE, 0x60, 0x10, 4, 1),
+	PIN_FIELD_BASE(18, 18, IOCFG_RB_BASE, 0x60, 0x10, 5, 1),
+	PIN_FIELD_BASE(19, 19, IOCFG_RB_BASE, 0x60, 0x10, 6, 1),
+	PIN_FIELD_BASE(20, 20, IOCFG_RB_BASE, 0x60, 0x10, 7, 1),
+	PIN_FIELD_BASE(21, 21, IOCFG_RT_BASE, 0x40, 0x10, 12, 1),
+	PIN_FIELD_BASE(22, 22, IOCFG_RT_BASE, 0x40, 0x10, 13, 1),
+	PIN_FIELD_BASE(23, 23, IOCFG_RT_BASE, 0x40, 0x10, 14, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x40, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x40, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 26, IOCFG_RT_BASE, 0x40, 0x10, 15, 1),
+	PIN_FIELD_BASE(27, 27, IOCFG_RT_BASE, 0x40, 0x10, 16, 1),
+	PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x40, 0x10, 19, 1),
+	PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x40, 0x10, 20, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x40, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x40, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x40, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x30, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x30, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x30, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 36, IOCFG_LT_BASE, 0x30, 0x10, 5, 1),
+	PIN_FIELD_BASE(37, 37, IOCFG_LT_BASE, 0x30, 0x10, 6, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x30, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x60, 0x10, 18, 1),
+	PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x60, 0x10, 19, 1),
+	PIN_FIELD_BASE(66, 66, IOCFG_LB_BASE, 0x40, 0x10, 2, 1),
+	PIN_FIELD_BASE(67, 67, IOCFG_LB_BASE, 0x40, 0x10, 3, 1),
+	PIN_FIELD_BASE(68, 68, IOCFG_LB_BASE, 0x40, 0x10, 4, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986b_pin_r0_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x70, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 1, IOCFG_LT_BASE, 0x40, 0x10, 10, 1),
+	PIN_FIELD_BASE(2, 2, IOCFG_LT_BASE, 0x40, 0x10, 11, 1),
+	PIN_FIELD_BASE(3, 3, IOCFG_LB_BASE, 0x50, 0x10, 0, 1),
+	PIN_FIELD_BASE(4, 4, IOCFG_LB_BASE, 0x50, 0x10, 1, 1),
+	PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x70, 0x10, 0, 1),
+	PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x70, 0x10, 1, 1),
+	PIN_FIELD_BASE(7, 7, IOCFG_LT_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(8, 8, IOCFG_LT_BASE, 0x40, 0x10, 1, 1),
+	PIN_FIELD_BASE(9, 9, IOCFG_LT_BASE, 0x40, 0x10, 2, 1),
+	PIN_FIELD_BASE(10, 10, IOCFG_LT_BASE, 0x40, 0x10, 3, 1),
+	PIN_FIELD_BASE(11, 11, IOCFG_RB_BASE, 0x70, 0x10, 8, 1),
+	PIN_FIELD_BASE(12, 12, IOCFG_RB_BASE, 0x70, 0x10, 9, 1),
+	PIN_FIELD_BASE(13, 13, IOCFG_RB_BASE, 0x70, 0x10, 10, 1),
+	PIN_FIELD_BASE(14, 14, IOCFG_RB_BASE, 0x70, 0x10, 11, 1),
+	PIN_FIELD_BASE(15, 15, IOCFG_RB_BASE, 0x70, 0x10, 2, 1),
+	PIN_FIELD_BASE(16, 16, IOCFG_RB_BASE, 0x70, 0x10, 3, 1),
+	PIN_FIELD_BASE(17, 17, IOCFG_RB_BASE, 0x70, 0x10, 4, 1),
+	PIN_FIELD_BASE(18, 18, IOCFG_RB_BASE, 0x70, 0x10, 5, 1),
+	PIN_FIELD_BASE(19, 19, IOCFG_RB_BASE, 0x70, 0x10, 6, 1),
+	PIN_FIELD_BASE(20, 20, IOCFG_RB_BASE, 0x70, 0x10, 7, 1),
+	PIN_FIELD_BASE(21, 21, IOCFG_RT_BASE, 0x50, 0x10, 12, 1),
+	PIN_FIELD_BASE(22, 22, IOCFG_RT_BASE, 0x50, 0x10, 13, 1),
+	PIN_FIELD_BASE(23, 23, IOCFG_RT_BASE, 0x50, 0x10, 14, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x50, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x50, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 26, IOCFG_RT_BASE, 0x50, 0x10, 15, 1),
+	PIN_FIELD_BASE(27, 27, IOCFG_RT_BASE, 0x50, 0x10, 16, 1),
+	PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x50, 0x10, 19, 1),
+	PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x50, 0x10, 20, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x50, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x50, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x50, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x40, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x40, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x40, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 36, IOCFG_LT_BASE, 0x40, 0x10, 5, 1),
+	PIN_FIELD_BASE(37, 37, IOCFG_LT_BASE, 0x40, 0x10, 6, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x40, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x70, 0x10, 18, 1),
+	PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x70, 0x10, 19, 1),
+	PIN_FIELD_BASE(66, 66, IOCFG_LB_BASE, 0x50, 0x10, 2, 1),
+	PIN_FIELD_BASE(67, 67, IOCFG_LB_BASE, 0x50, 0x10, 3, 1),
+	PIN_FIELD_BASE(68, 68, IOCFG_LB_BASE, 0x50, 0x10, 4, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986a_pin_r0_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x70, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 1, IOCFG_LT_BASE, 0x40, 0x10, 10, 1),
+	PIN_FIELD_BASE(2, 2, IOCFG_LT_BASE, 0x40, 0x10, 11, 1),
+	PIN_FIELD_BASE(3, 3, IOCFG_LB_BASE, 0x50, 0x10, 0, 1),
+	PIN_FIELD_BASE(4, 4, IOCFG_LB_BASE, 0x50, 0x10, 1, 1),
+	PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x70, 0x10, 0, 1),
+	PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x70, 0x10, 1, 1),
+	PIN_FIELD_BASE(7, 7, IOCFG_LT_BASE, 0x40, 0x10, 0, 1),
+	PIN_FIELD_BASE(8, 8, IOCFG_LT_BASE, 0x40, 0x10, 1, 1),
+	PIN_FIELD_BASE(9, 9, IOCFG_LT_BASE, 0x40, 0x10, 2, 1),
+	PIN_FIELD_BASE(10, 10, IOCFG_LT_BASE, 0x40, 0x10, 3, 1),
+	PIN_FIELD_BASE(11, 11, IOCFG_RB_BASE, 0x70, 0x10, 8, 1),
+	PIN_FIELD_BASE(12, 12, IOCFG_RB_BASE, 0x70, 0x10, 9, 1),
+	PIN_FIELD_BASE(13, 13, IOCFG_RB_BASE, 0x70, 0x10, 10, 1),
+	PIN_FIELD_BASE(14, 14, IOCFG_RB_BASE, 0x70, 0x10, 11, 1),
+	PIN_FIELD_BASE(15, 15, IOCFG_RB_BASE, 0x70, 0x10, 2, 1),
+	PIN_FIELD_BASE(16, 16, IOCFG_RB_BASE, 0x70, 0x10, 3, 1),
+	PIN_FIELD_BASE(17, 17, IOCFG_RB_BASE, 0x70, 0x10, 4, 1),
+	PIN_FIELD_BASE(18, 18, IOCFG_RB_BASE, 0x70, 0x10, 5, 1),
+	PIN_FIELD_BASE(19, 19, IOCFG_RB_BASE, 0x70, 0x10, 6, 1),
+	PIN_FIELD_BASE(20, 20, IOCFG_RB_BASE, 0x70, 0x10, 7, 1),
+	PIN_FIELD_BASE(21, 21, IOCFG_RT_BASE, 0x50, 0x10, 12, 1),
+	PIN_FIELD_BASE(22, 22, IOCFG_RT_BASE, 0x50, 0x10, 13, 1),
+	PIN_FIELD_BASE(23, 23, IOCFG_RT_BASE, 0x50, 0x10, 14, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x50, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x50, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 26, IOCFG_RT_BASE, 0x50, 0x10, 15, 1),
+	PIN_FIELD_BASE(27, 27, IOCFG_RT_BASE, 0x50, 0x10, 16, 1),
+	PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x50, 0x10, 19, 1),
+	PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x50, 0x10, 20, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x50, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x50, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x50, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x40, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x40, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x40, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 36, IOCFG_LT_BASE, 0x40, 0x10, 5, 1),
+	PIN_FIELD_BASE(37, 37, IOCFG_LT_BASE, 0x40, 0x10, 6, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x40, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x70, 0x10, 18, 1),
+	PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x70, 0x10, 19, 1),
+	PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x70, 0x10, 12, 1),
+	PIN_FIELD_BASE(42, 42, IOCFG_RB_BASE, 0x70, 0x10, 22, 1),
+	PIN_FIELD_BASE(43, 43, IOCFG_RB_BASE, 0x70, 0x10, 23, 1),
+	PIN_FIELD_BASE(44, 44, IOCFG_RB_BASE, 0x70, 0x10, 20, 1),
+	PIN_FIELD_BASE(45, 45, IOCFG_RB_BASE, 0x70, 0x10, 21, 1),
+	PIN_FIELD_BASE(46, 46, IOCFG_RB_BASE, 0x70, 0x10, 26, 1),
+	PIN_FIELD_BASE(47, 47, IOCFG_RB_BASE, 0x70, 0x10, 27, 1),
+	PIN_FIELD_BASE(48, 48, IOCFG_RB_BASE, 0x70, 0x10, 24, 1),
+	PIN_FIELD_BASE(49, 49, IOCFG_RB_BASE, 0x70, 0x10, 25, 1),
+	PIN_FIELD_BASE(50, 50, IOCFG_RT_BASE, 0x50, 0x10, 2, 1),
+	PIN_FIELD_BASE(51, 51, IOCFG_RT_BASE, 0x50, 0x10, 3, 1),
+	PIN_FIELD_BASE(52, 52, IOCFG_RT_BASE, 0x50, 0x10, 4, 1),
+	PIN_FIELD_BASE(53, 53, IOCFG_RT_BASE, 0x50, 0x10, 5, 1),
+	PIN_FIELD_BASE(54, 54, IOCFG_RT_BASE, 0x50, 0x10, 6, 1),
+	PIN_FIELD_BASE(55, 55, IOCFG_RT_BASE, 0x50, 0x10, 7, 1),
+	PIN_FIELD_BASE(56, 56, IOCFG_RT_BASE, 0x50, 0x10, 8, 1),
+	PIN_FIELD_BASE(57, 57, IOCFG_RT_BASE, 0x50, 0x10, 9, 1),
+	PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x50, 0x10, 1, 1),
+	PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x50, 0x10, 0, 1),
+	PIN_FIELD_BASE(60, 60, IOCFG_RT_BASE, 0x50, 0x10, 10, 1),
+	PIN_FIELD_BASE(61, 61, IOCFG_RT_BASE, 0x50, 0x10, 11, 1),
+	PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x70, 0x10, 15, 1),
+	PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x70, 0x10, 14, 1),
+	PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x70, 0x10, 13, 1),
+	PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x70, 0x10, 16, 1),
+	PIN_FIELD_BASE(66, 66, IOCFG_LB_BASE, 0x50, 0x10, 2, 1),
+	PIN_FIELD_BASE(67, 67, IOCFG_LB_BASE, 0x50, 0x10, 3, 1),
+	PIN_FIELD_BASE(68, 68, IOCFG_LB_BASE, 0x50, 0x10, 4, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986a_pin_r1_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x80, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 1, IOCFG_LT_BASE, 0x50, 0x10, 10, 1),
+	PIN_FIELD_BASE(2, 2, IOCFG_LT_BASE, 0x50, 0x10, 11, 1),
+	PIN_FIELD_BASE(3, 3, IOCFG_LB_BASE, 0x60, 0x10, 0, 1),
+	PIN_FIELD_BASE(4, 4, IOCFG_LB_BASE, 0x60, 0x10, 1, 1),
+	PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x80, 0x10, 0, 1),
+	PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x80, 0x10, 1, 1),
+	PIN_FIELD_BASE(7, 7, IOCFG_LT_BASE, 0x50, 0x10, 0, 1),
+	PIN_FIELD_BASE(8, 8, IOCFG_LT_BASE, 0x50, 0x10, 1, 1),
+	PIN_FIELD_BASE(9, 9, IOCFG_LT_BASE, 0x50, 0x10, 2, 1),
+	PIN_FIELD_BASE(10, 10, IOCFG_LT_BASE, 0x50, 0x10, 3, 1),
+	PIN_FIELD_BASE(11, 11, IOCFG_RB_BASE, 0x80, 0x10, 8, 1),
+	PIN_FIELD_BASE(12, 12, IOCFG_RB_BASE, 0x80, 0x10, 9, 1),
+	PIN_FIELD_BASE(13, 13, IOCFG_RB_BASE, 0x80, 0x10, 10, 1),
+	PIN_FIELD_BASE(14, 14, IOCFG_RB_BASE, 0x80, 0x10, 11, 1),
+	PIN_FIELD_BASE(15, 15, IOCFG_RB_BASE, 0x80, 0x10, 2, 1),
+	PIN_FIELD_BASE(16, 16, IOCFG_RB_BASE, 0x80, 0x10, 3, 1),
+	PIN_FIELD_BASE(17, 17, IOCFG_RB_BASE, 0x80, 0x10, 4, 1),
+	PIN_FIELD_BASE(18, 18, IOCFG_RB_BASE, 0x80, 0x10, 5, 1),
+	PIN_FIELD_BASE(19, 19, IOCFG_RB_BASE, 0x80, 0x10, 6, 1),
+	PIN_FIELD_BASE(20, 20, IOCFG_RB_BASE, 0x80, 0x10, 7, 1),
+	PIN_FIELD_BASE(21, 21, IOCFG_RT_BASE, 0x60, 0x10, 12, 1),
+	PIN_FIELD_BASE(22, 22, IOCFG_RT_BASE, 0x60, 0x10, 13, 1),
+	PIN_FIELD_BASE(23, 23, IOCFG_RT_BASE, 0x60, 0x10, 14, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x60, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x60, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 26, IOCFG_RT_BASE, 0x60, 0x10, 15, 1),
+	PIN_FIELD_BASE(27, 27, IOCFG_RT_BASE, 0x60, 0x10, 16, 1),
+	PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x60, 0x10, 19, 1),
+	PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x60, 0x10, 20, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x60, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x60, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x60, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x50, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x50, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x50, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 36, IOCFG_LT_BASE, 0x50, 0x10, 5, 1),
+	PIN_FIELD_BASE(37, 37, IOCFG_LT_BASE, 0x50, 0x10, 6, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x50, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x80, 0x10, 18, 1),
+	PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x80, 0x10, 19, 1),
+	PIN_FIELD_BASE(41, 41, IOCFG_RB_BASE, 0x80, 0x10, 12, 1),
+	PIN_FIELD_BASE(42, 42, IOCFG_RB_BASE, 0x80, 0x10, 22, 1),
+	PIN_FIELD_BASE(43, 43, IOCFG_RB_BASE, 0x80, 0x10, 23, 1),
+	PIN_FIELD_BASE(44, 44, IOCFG_RB_BASE, 0x80, 0x10, 20, 1),
+	PIN_FIELD_BASE(45, 45, IOCFG_RB_BASE, 0x80, 0x10, 21, 1),
+	PIN_FIELD_BASE(46, 46, IOCFG_RB_BASE, 0x80, 0x10, 26, 1),
+	PIN_FIELD_BASE(47, 47, IOCFG_RB_BASE, 0x80, 0x10, 27, 1),
+	PIN_FIELD_BASE(48, 48, IOCFG_RB_BASE, 0x80, 0x10, 24, 1),
+	PIN_FIELD_BASE(49, 49, IOCFG_RB_BASE, 0x80, 0x10, 25, 1),
+	PIN_FIELD_BASE(50, 50, IOCFG_RT_BASE, 0x60, 0x10, 2, 1),
+	PIN_FIELD_BASE(51, 51, IOCFG_RT_BASE, 0x60, 0x10, 3, 1),
+	PIN_FIELD_BASE(52, 52, IOCFG_RT_BASE, 0x60, 0x10, 4, 1),
+	PIN_FIELD_BASE(53, 53, IOCFG_RT_BASE, 0x60, 0x10, 5, 1),
+	PIN_FIELD_BASE(54, 54, IOCFG_RT_BASE, 0x60, 0x10, 6, 1),
+	PIN_FIELD_BASE(55, 55, IOCFG_RT_BASE, 0x60, 0x10, 7, 1),
+	PIN_FIELD_BASE(56, 56, IOCFG_RT_BASE, 0x60, 0x10, 8, 1),
+	PIN_FIELD_BASE(57, 57, IOCFG_RT_BASE, 0x60, 0x10, 9, 1),
+	PIN_FIELD_BASE(58, 58, IOCFG_RT_BASE, 0x60, 0x10, 1, 1),
+	PIN_FIELD_BASE(59, 59, IOCFG_RT_BASE, 0x60, 0x10, 0, 1),
+	PIN_FIELD_BASE(60, 60, IOCFG_RT_BASE, 0x60, 0x10, 10, 1),
+	PIN_FIELD_BASE(61, 61, IOCFG_RT_BASE, 0x60, 0x10, 11, 1),
+	PIN_FIELD_BASE(62, 62, IOCFG_RB_BASE, 0x80, 0x10, 15, 1),
+	PIN_FIELD_BASE(63, 63, IOCFG_RB_BASE, 0x80, 0x10, 14, 1),
+	PIN_FIELD_BASE(64, 64, IOCFG_RB_BASE, 0x80, 0x10, 13, 1),
+	PIN_FIELD_BASE(65, 65, IOCFG_RB_BASE, 0x80, 0x10, 16, 1),
+	PIN_FIELD_BASE(66, 66, IOCFG_LB_BASE, 0x60, 0x10, 2, 1),
+	PIN_FIELD_BASE(67, 67, IOCFG_LB_BASE, 0x60, 0x10, 3, 1),
+	PIN_FIELD_BASE(68, 68, IOCFG_LB_BASE, 0x60, 0x10, 4, 1),
+};
+
+static const struct mtk_pin_field_calc mt7986b_pin_r1_range[] = {
+	PIN_FIELD_BASE(0, 0, IOCFG_RB_BASE, 0x80, 0x10, 17, 1),
+	PIN_FIELD_BASE(1, 1, IOCFG_LT_BASE, 0x50, 0x10, 10, 1),
+	PIN_FIELD_BASE(2, 2, IOCFG_LT_BASE, 0x50, 0x10, 11, 1),
+	PIN_FIELD_BASE(3, 3, IOCFG_LB_BASE, 0x60, 0x10, 0, 1),
+	PIN_FIELD_BASE(4, 4, IOCFG_LB_BASE, 0x60, 0x10, 1, 1),
+	PIN_FIELD_BASE(5, 5, IOCFG_RB_BASE, 0x80, 0x10, 0, 1),
+	PIN_FIELD_BASE(6, 6, IOCFG_RB_BASE, 0x80, 0x10, 1, 1),
+	PIN_FIELD_BASE(7, 7, IOCFG_LT_BASE, 0x50, 0x10, 0, 1),
+	PIN_FIELD_BASE(8, 8, IOCFG_LT_BASE, 0x50, 0x10, 1, 1),
+	PIN_FIELD_BASE(9, 9, IOCFG_LT_BASE, 0x50, 0x10, 2, 1),
+	PIN_FIELD_BASE(10, 10, IOCFG_LT_BASE, 0x50, 0x10, 3, 1),
+	PIN_FIELD_BASE(11, 11, IOCFG_RB_BASE, 0x80, 0x10, 8, 1),
+	PIN_FIELD_BASE(12, 12, IOCFG_RB_BASE, 0x80, 0x10, 9, 1),
+	PIN_FIELD_BASE(13, 13, IOCFG_RB_BASE, 0x80, 0x10, 10, 1),
+	PIN_FIELD_BASE(14, 14, IOCFG_RB_BASE, 0x80, 0x10, 11, 1),
+	PIN_FIELD_BASE(15, 15, IOCFG_RB_BASE, 0x80, 0x10, 2, 1),
+	PIN_FIELD_BASE(16, 16, IOCFG_RB_BASE, 0x80, 0x10, 3, 1),
+	PIN_FIELD_BASE(17, 17, IOCFG_RB_BASE, 0x80, 0x10, 4, 1),
+	PIN_FIELD_BASE(18, 18, IOCFG_RB_BASE, 0x80, 0x10, 5, 1),
+	PIN_FIELD_BASE(19, 19, IOCFG_RB_BASE, 0x80, 0x10, 6, 1),
+	PIN_FIELD_BASE(20, 20, IOCFG_RB_BASE, 0x80, 0x10, 7, 1),
+	PIN_FIELD_BASE(21, 21, IOCFG_RT_BASE, 0x60, 0x10, 12, 1),
+	PIN_FIELD_BASE(22, 22, IOCFG_RT_BASE, 0x60, 0x10, 13, 1),
+	PIN_FIELD_BASE(23, 23, IOCFG_RT_BASE, 0x60, 0x10, 14, 1),
+	PIN_FIELD_BASE(24, 24, IOCFG_RT_BASE, 0x60, 0x10, 18, 1),
+	PIN_FIELD_BASE(25, 25, IOCFG_RT_BASE, 0x60, 0x10, 17, 1),
+	PIN_FIELD_BASE(26, 26, IOCFG_RT_BASE, 0x60, 0x10, 15, 1),
+	PIN_FIELD_BASE(27, 27, IOCFG_RT_BASE, 0x60, 0x10, 16, 1),
+	PIN_FIELD_BASE(28, 28, IOCFG_RT_BASE, 0x60, 0x10, 19, 1),
+	PIN_FIELD_BASE(29, 29, IOCFG_RT_BASE, 0x60, 0x10, 20, 1),
+	PIN_FIELD_BASE(30, 30, IOCFG_RT_BASE, 0x60, 0x10, 23, 1),
+	PIN_FIELD_BASE(31, 31, IOCFG_RT_BASE, 0x60, 0x10, 22, 1),
+	PIN_FIELD_BASE(32, 32, IOCFG_RT_BASE, 0x60, 0x10, 21, 1),
+	PIN_FIELD_BASE(33, 33, IOCFG_LT_BASE, 0x50, 0x10, 4, 1),
+	PIN_FIELD_BASE(34, 34, IOCFG_LT_BASE, 0x50, 0x10, 8, 1),
+	PIN_FIELD_BASE(35, 35, IOCFG_LT_BASE, 0x50, 0x10, 7, 1),
+	PIN_FIELD_BASE(36, 36, IOCFG_LT_BASE, 0x50, 0x10, 5, 1),
+	PIN_FIELD_BASE(37, 37, IOCFG_LT_BASE, 0x50, 0x10, 6, 1),
+	PIN_FIELD_BASE(38, 38, IOCFG_LT_BASE, 0x50, 0x10, 9, 1),
+	PIN_FIELD_BASE(39, 39, IOCFG_RB_BASE, 0x80, 0x10, 18, 1),
+	PIN_FIELD_BASE(40, 40, IOCFG_RB_BASE, 0x80, 0x10, 19, 1),
+	PIN_FIELD_BASE(66, 66, IOCFG_LB_BASE, 0x60, 0x10, 2, 1),
+	PIN_FIELD_BASE(67, 67, IOCFG_LB_BASE, 0x60, 0x10, 3, 1),
+	PIN_FIELD_BASE(68, 68, IOCFG_LB_BASE, 0x60, 0x10, 4, 1),
+};
+
+static const struct mtk_pin_reg_calc mt7986a_reg_cals[] = {
+	[PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7986a_pin_mode_range),
+	[PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7986a_pin_dir_range),
+	[PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7986a_pin_di_range),
+	[PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7986a_pin_do_range),
+	[PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7986a_pin_smt_range),
+	[PINCTRL_PIN_REG_IES] = MTK_RANGE(mt7986a_pin_ies_range),
+	[PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt7986a_pin_drv_range),
+	[PINCTRL_PIN_REG_PU] = MTK_RANGE(mt7986_pin_pu_range),
+	[PINCTRL_PIN_REG_PD] = MTK_RANGE(mt7986_pin_pd_range),
+	[PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt7986a_pin_pupd_range),
+	[PINCTRL_PIN_REG_R0] = MTK_RANGE(mt7986a_pin_r0_range),
+	[PINCTRL_PIN_REG_R1] = MTK_RANGE(mt7986a_pin_r1_range),
+};
+
+static const struct mtk_pin_reg_calc mt7986b_reg_cals[] = {
+	[PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt7986b_pin_mode_range),
+	[PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt7986b_pin_dir_range),
+	[PINCTRL_PIN_REG_DI] = MTK_RANGE(mt7986b_pin_di_range),
+	[PINCTRL_PIN_REG_DO] = MTK_RANGE(mt7986b_pin_do_range),
+	[PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt7986b_pin_smt_range),
+	[PINCTRL_PIN_REG_IES] = MTK_RANGE(mt7986b_pin_ies_range),
+	[PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt7986b_pin_drv_range),
+	[PINCTRL_PIN_REG_PU] = MTK_RANGE(mt7986_pin_pu_range),
+	[PINCTRL_PIN_REG_PD] = MTK_RANGE(mt7986_pin_pd_range),
+	[PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt7986b_pin_pupd_range),
+	[PINCTRL_PIN_REG_R0] = MTK_RANGE(mt7986b_pin_r0_range),
+	[PINCTRL_PIN_REG_R1] = MTK_RANGE(mt7986b_pin_r1_range),
+};
+
+static const struct mtk_pin_desc mt7986a_pins[] = {
+	MT7986_PIN(0, "SYS_WATCHDOG"),
+	MT7986_PIN(1, "WF2G_LED"),
+	MT7986_PIN(2, "WF5G_LED"),
+	MT7986_PIN(3, "I2C_SCL"),
+	MT7986_PIN(4, "I2C_SDA"),
+	MT7986_PIN(5, "GPIO_0"),
+	MT7986_PIN(6, "GPIO_1"),
+	MT7986_PIN(7, "GPIO_2"),
+	MT7986_PIN(8, "GPIO_3"),
+	MT7986_PIN(9, "GPIO_4"),
+	MT7986_PIN(10, "GPIO_5"),
+	MT7986_PIN(11, "GPIO_6"),
+	MT7986_PIN(12, "GPIO_7"),
+	MT7986_PIN(13, "GPIO_8"),
+	MT7986_PIN(14, "GPIO_9"),
+	MT7986_PIN(15, "GPIO_10"),
+	MT7986_PIN(16, "GPIO_11"),
+	MT7986_PIN(17, "GPIO_12"),
+	MT7986_PIN(18, "GPIO_13"),
+	MT7986_PIN(19, "GPIO_14"),
+	MT7986_PIN(20, "GPIO_15"),
+	MT7986_PIN(21, "PWM0"),
+	MT7986_PIN(22, "PWM1"),
+	MT7986_PIN(23, "SPI0_CLK"),
+	MT7986_PIN(24, "SPI0_MOSI"),
+	MT7986_PIN(25, "SPI0_MISO"),
+	MT7986_PIN(26, "SPI0_CS"),
+	MT7986_PIN(27, "SPI0_HOLD"),
+	MT7986_PIN(28, "SPI0_WP"),
+	MT7986_PIN(29, "SPI1_CLK"),
+	MT7986_PIN(30, "SPI1_MOSI"),
+	MT7986_PIN(31, "SPI1_MISO"),
+	MT7986_PIN(32, "SPI1_CS"),
+	MT7986_PIN(33, "SPI2_CLK"),
+	MT7986_PIN(34, "SPI2_MOSI"),
+	MT7986_PIN(35, "SPI2_MISO"),
+	MT7986_PIN(36, "SPI2_CS"),
+	MT7986_PIN(37, "SPI2_HOLD"),
+	MT7986_PIN(38, "SPI2_WP"),
+	MT7986_PIN(39, "UART0_RXD"),
+	MT7986_PIN(40, "UART0_TXD"),
+	MT7986_PIN(41, "PCIE_PERESET_N"),
+	MT7986_PIN(42, "UART1_RXD"),
+	MT7986_PIN(43, "UART1_TXD"),
+	MT7986_PIN(44, "UART1_CTS"),
+	MT7986_PIN(45, "UART1_RTS"),
+	MT7986_PIN(46, "UART2_RXD"),
+	MT7986_PIN(47, "UART2_TXD"),
+	MT7986_PIN(48, "UART2_CTS"),
+	MT7986_PIN(49, "UART2_RTS"),
+	MT7986_PIN(50, "EMMC_DATA_0"),
+	MT7986_PIN(51, "EMMC_DATA_1"),
+	MT7986_PIN(52, "EMMC_DATA_2"),
+	MT7986_PIN(53, "EMMC_DATA_3"),
+	MT7986_PIN(54, "EMMC_DATA_4"),
+	MT7986_PIN(55, "EMMC_DATA_5"),
+	MT7986_PIN(56, "EMMC_DATA_6"),
+	MT7986_PIN(57, "EMMC_DATA_7"),
+	MT7986_PIN(58, "EMMC_CMD"),
+	MT7986_PIN(59, "EMMC_CK"),
+	MT7986_PIN(60, "EMMC_DSL"),
+	MT7986_PIN(61, "EMMC_RSTB"),
+	MT7986_PIN(62, "PCM_DTX"),
+	MT7986_PIN(63, "PCM_DRX"),
+	MT7986_PIN(64, "PCM_CLK"),
+	MT7986_PIN(65, "PCM_FS"),
+	MT7986_PIN(66, "MT7531_INT"),
+	MT7986_PIN(67, "SMI_MDC"),
+	MT7986_PIN(68, "SMI_MDIO"),
+	MT7986_PIN(69, "WF0_DIG_RESETB"),
+	MT7986_PIN(70, "WF0_CBA_RESETB"),
+	MT7986_PIN(71, "WF0_XO_REQ"),
+	MT7986_PIN(72, "WF0_TOP_CLK"),
+	MT7986_PIN(73, "WF0_TOP_DATA"),
+	MT7986_PIN(74, "WF0_HB1"),
+	MT7986_PIN(75, "WF0_HB2"),
+	MT7986_PIN(76, "WF0_HB3"),
+	MT7986_PIN(77, "WF0_HB4"),
+	MT7986_PIN(78, "WF0_HB0"),
+	MT7986_PIN(79, "WF0_HB0_B"),
+	MT7986_PIN(80, "WF0_HB5"),
+	MT7986_PIN(81, "WF0_HB6"),
+	MT7986_PIN(82, "WF0_HB7"),
+	MT7986_PIN(83, "WF0_HB8"),
+	MT7986_PIN(84, "WF0_HB9"),
+	MT7986_PIN(85, "WF0_HB10"),
+	MT7986_PIN(86, "WF1_DIG_RESETB"),
+	MT7986_PIN(87, "WF1_CBA_RESETB"),
+	MT7986_PIN(88, "WF1_XO_REQ"),
+	MT7986_PIN(89, "WF1_TOP_CLK"),
+	MT7986_PIN(90, "WF1_TOP_DATA"),
+	MT7986_PIN(91, "WF1_HB1"),
+	MT7986_PIN(92, "WF1_HB2"),
+	MT7986_PIN(93, "WF1_HB3"),
+	MT7986_PIN(94, "WF1_HB4"),
+	MT7986_PIN(95, "WF1_HB0"),
+	MT7986_PIN(96, "WF1_HB0_B"),
+	MT7986_PIN(97, "WF1_HB5"),
+	MT7986_PIN(98, "WF1_HB6"),
+	MT7986_PIN(99, "WF1_HB7"),
+	MT7986_PIN(100, "WF1_HB8"),
+};
+
+static const struct mtk_pin_desc mt7986b_pins[] = {
+	MT7986_PIN(0, "SYS_WATCHDOG"),
+	MT7986_PIN(1, "WF2G_LED"),
+	MT7986_PIN(2, "WF5G_LED"),
+	MT7986_PIN(3, "I2C_SCL"),
+	MT7986_PIN(4, "I2C_SDA"),
+	MT7986_PIN(5, "GPIO_0"),
+	MT7986_PIN(6, "GPIO_1"),
+	MT7986_PIN(7, "GPIO_2"),
+	MT7986_PIN(8, "GPIO_3"),
+	MT7986_PIN(9, "GPIO_4"),
+	MT7986_PIN(10, "GPIO_5"),
+	MT7986_PIN(11, "GPIO_6"),
+	MT7986_PIN(12, "GPIO_7"),
+	MT7986_PIN(13, "GPIO_8"),
+	MT7986_PIN(14, "GPIO_9"),
+	MT7986_PIN(15, "GPIO_10"),
+	MT7986_PIN(16, "GPIO_11"),
+	MT7986_PIN(17, "GPIO_12"),
+	MT7986_PIN(18, "GPIO_13"),
+	MT7986_PIN(19, "GPIO_14"),
+	MT7986_PIN(20, "GPIO_15"),
+	MT7986_PIN(21, "PWM0"),
+	MT7986_PIN(22, "PWM1"),
+	MT7986_PIN(23, "SPI0_CLK"),
+	MT7986_PIN(24, "SPI0_MOSI"),
+	MT7986_PIN(25, "SPI0_MISO"),
+	MT7986_PIN(26, "SPI0_CS"),
+	MT7986_PIN(27, "SPI0_HOLD"),
+	MT7986_PIN(28, "SPI0_WP"),
+	MT7986_PIN(29, "SPI1_CLK"),
+	MT7986_PIN(30, "SPI1_MOSI"),
+	MT7986_PIN(31, "SPI1_MISO"),
+	MT7986_PIN(32, "SPI1_CS"),
+	MT7986_PIN(33, "SPI2_CLK"),
+	MT7986_PIN(34, "SPI2_MOSI"),
+	MT7986_PIN(35, "SPI2_MISO"),
+	MT7986_PIN(36, "SPI2_CS"),
+	MT7986_PIN(37, "SPI2_HOLD"),
+	MT7986_PIN(38, "SPI2_WP"),
+	MT7986_PIN(39, "UART0_RXD"),
+	MT7986_PIN(40, "UART0_TXD"),
+	MT7986_PIN(66, "MT7531_INT"),
+	MT7986_PIN(67, "SMI_MDC"),
+	MT7986_PIN(68, "SMI_MDIO"),
+	MT7986_PIN(69, "WF0_DIG_RESETB"),
+	MT7986_PIN(70, "WF0_CBA_RESETB"),
+	MT7986_PIN(71, "WF0_XO_REQ"),
+	MT7986_PIN(72, "WF0_TOP_CLK"),
+	MT7986_PIN(73, "WF0_TOP_DATA"),
+	MT7986_PIN(74, "WF0_HB1"),
+	MT7986_PIN(75, "WF0_HB2"),
+	MT7986_PIN(76, "WF0_HB3"),
+	MT7986_PIN(77, "WF0_HB4"),
+	MT7986_PIN(78, "WF0_HB0"),
+	MT7986_PIN(79, "WF0_HB0_B"),
+	MT7986_PIN(80, "WF0_HB5"),
+	MT7986_PIN(81, "WF0_HB6"),
+	MT7986_PIN(82, "WF0_HB7"),
+	MT7986_PIN(83, "WF0_HB8"),
+	MT7986_PIN(84, "WF0_HB9"),
+	MT7986_PIN(85, "WF0_HB10"),
+	MT7986_PIN(86, "WF1_DIG_RESETB"),
+	MT7986_PIN(87, "WF1_CBA_RESETB"),
+	MT7986_PIN(88, "WF1_XO_REQ"),
+	MT7986_PIN(89, "WF1_TOP_CLK"),
+	MT7986_PIN(90, "WF1_TOP_DATA"),
+	MT7986_PIN(91, "WF1_HB1"),
+	MT7986_PIN(92, "WF1_HB2"),
+	MT7986_PIN(93, "WF1_HB3"),
+	MT7986_PIN(94, "WF1_HB4"),
+	MT7986_PIN(95, "WF1_HB0"),
+	MT7986_PIN(96, "WF1_HB0_B"),
+	MT7986_PIN(97, "WF1_HB5"),
+	MT7986_PIN(98, "WF1_HB6"),
+	MT7986_PIN(99, "WF1_HB7"),
+	MT7986_PIN(100, "WF1_HB8"),
+};
+
+/* List all groups consisting of these pins dedicated to the enablement of
+ * certain hardware block and the corresponding mode for all of the pins.
+ * The hardware probably has multiple combinations of these pinouts.
+ */
+
+static int mt7986_watchdog_pins[] = { 0, };
+static int mt7986_watchdog_funcs[] = { 1, };
+
+static int mt7986_wifi_led_pins[] = { 1, 2, };
+static int mt7986_wifi_led_funcs[] = { 1, 1, };
+
+static int mt7986_i2c_pins[] = { 3, 4, };
+static int mt7986_i2c_funcs[] = { 1, 1, };
+
+static int mt7986_uart1_0_pins[] = { 7, 8, 9, 10, };
+static int mt7986_uart1_0_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_spi1_0_pins[] = { 11, 12, 13, 14, };
+static int mt7986_spi1_0_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_pwm1_1_pins[] = { 20, };
+static int mt7986_pwm1_1_funcs[] = { 2, };
+
+static int mt7986_pwm0_pins[] = { 21, };
+static int mt7986_pwm0_funcs[] = { 1, };
+
+static int mt7986_pwm1_0_pins[] = { 22, };
+static int mt7986_pwm1_0_funcs[] = { 1, };
+
+static int mt7986_emmc_45_pins[] = {
+	22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, };
+static int mt7986_emmc_45_funcs[] = { 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
+
+static int mt7986_snfi_pins[] = { 23, 24, 25, 26, 27, 28, };
+static int mt7986_snfi_funcs[] = { 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_spi1_1_pins[] = { 23, 24, 25, 26, };
+static int mt7986_spi1_1_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart1_1_pins[] = { 23, 24, 25, 26, };
+static int mt7986_uart1_1_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_spi1_2_pins[] = { 29, 30, 31, 32, };
+static int mt7986_spi1_2_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_uart1_2_pins[] = { 29, 30, 31, 32, };
+static int mt7986_uart1_2_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart2_0_pins[] = { 29, 30, 31, 32, };
+static int mt7986_uart2_0_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_spi0_pins[] = { 33, 34, 35, 36, };
+static int mt7986_spi0_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_spi0_wp_hold_pins[] = { 37, 38, };
+static int mt7986_spi0_wp_hold_funcs[] = { 1, 1, };
+
+static int mt7986_uart2_1_pins[] = { 33, 34, 35, 36, };
+static int mt7986_uart2_1_funcs[] = { 3, 3, 3, 3, };
+
+static int mt7986_uart1_3_rx_tx_pins[] = { 35, 36, };
+static int mt7986_uart1_3_rx_tx_funcs[] = { 2, 2, };
+
+static int mt7986_uart1_3_cts_rts_pins[] = { 37, 38, };
+static int mt7986_uart1_3_cts_rts_funcs[] = { 2, 2, };
+
+static int mt7986_spi1_3_pins[] = { 33, 34, 35, 36, };
+static int mt7986_spi1_3_funcs[] = { 4, 4, 4, 4, };
+
+static int mt7986_uart0_pins[] = { 39, 40, };
+static int mt7986_uart0_funcs[] = { 1, 1, };
+
+static int mt7986_pcie_reset_pins[] = { 41, };
+static int mt7986_pcie_reset_funcs[] = { 1, };
+
+static int mt7986_uart1_pins[] = { 42, 43, 44, 45, };
+static int mt7986_uart1_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_uart2_pins[] = { 46, 47, 48, 49, };
+static int mt7986_uart2_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_emmc_51_pins[] = {
+	50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, };
+static int mt7986_emmc_51_funcs[] = { 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_pcm_pins[] = { 62, 63, 64, 65, };
+static int mt7986_pcm_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_i2s_pins[] = { 62, 63, 64, 65, };
+static int mt7986_i2s_funcs[] = { 1, 1, 1, 1, };
+
+static int mt7986_switch_int_pins[] = { 66, };
+static int mt7986_switch_int_funcs[] = { 1, };
+
+static int mt7986_mdc_mdio_pins[] = { 67, 68, };
+static int mt7986_mdc_mdio_funcs[] = { 1, 1, };
+
+static int mt7986_wf_2g_pins[] = {74, 75, 76, 77, 78, 79, 80, 81, 82, 83, };
+static int mt7986_wf_2g_funcs[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_wf_5g_pins[] = {91, 92, 93, 94, 95, 96, 97, 98, 99, 100, };
+static int mt7986_wf_5g_funcs[] = {1, 1, 1, 1, 1, 1, 1, 1, 1, 1, };
+
+static int mt7986_wf_dbdc_pins[] = {
+	74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, };
+static int mt7986_wf_dbdc_funcs[] = {
+	2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, };
+
+static int mt7986_pcie_clk_pins[] = { 9, };
+static int mt7986_pcie_clk_funcs[] = { 1, };
+
+static int mt7986_pcie_wake_pins[] = { 10, };
+static int mt7986_pcie_wake_funcs[] = { 1, };
+
+static const struct group_desc mt7986a_groups[] = {
+	PINCTRL_PIN_GROUP("watchdog", mt7986_watchdog),
+	PINCTRL_PIN_GROUP("wifi_led", mt7986_wifi_led),
+	PINCTRL_PIN_GROUP("i2c", mt7986_i2c),
+	PINCTRL_PIN_GROUP("uart1_0", mt7986_uart1_0),
+	PINCTRL_PIN_GROUP("pcie_clk", mt7986_pcie_clk),
+	PINCTRL_PIN_GROUP("pcie_wake", mt7986_pcie_wake),
+	PINCTRL_PIN_GROUP("spi1_0", mt7986_spi1_0),
+	PINCTRL_PIN_GROUP("pwm1_1", mt7986_pwm1_1),
+	PINCTRL_PIN_GROUP("pwm0", mt7986_pwm0),
+	PINCTRL_PIN_GROUP("pwm1_0", mt7986_pwm1_0),
+	PINCTRL_PIN_GROUP("emmc_45", mt7986_emmc_45),
+	PINCTRL_PIN_GROUP("snfi", mt7986_snfi),
+	PINCTRL_PIN_GROUP("spi1_1", mt7986_spi1_1),
+	PINCTRL_PIN_GROUP("uart1_1", mt7986_uart1_1),
+	PINCTRL_PIN_GROUP("spi1_2", mt7986_spi1_2),
+	PINCTRL_PIN_GROUP("uart1_2", mt7986_uart1_2),
+	PINCTRL_PIN_GROUP("uart2_0", mt7986_uart2_0),
+	PINCTRL_PIN_GROUP("spi0", mt7986_spi0),
+	PINCTRL_PIN_GROUP("spi0_wp_hold", mt7986_spi0_wp_hold),
+	PINCTRL_PIN_GROUP("uart2_1", mt7986_uart2_1),
+	PINCTRL_PIN_GROUP("uart1_3_rx_tx", mt7986_uart1_3_rx_tx),
+	PINCTRL_PIN_GROUP("uart1_3_cts_rts", mt7986_uart1_3_cts_rts),
+	PINCTRL_PIN_GROUP("spi1_3", mt7986_spi1_3),
+	PINCTRL_PIN_GROUP("uart0", mt7986_uart0),
+	PINCTRL_PIN_GROUP("switch_int", mt7986_switch_int),
+	PINCTRL_PIN_GROUP("mdc_mdio", mt7986_mdc_mdio),
+	PINCTRL_PIN_GROUP("pcie_pereset", mt7986_pcie_reset),
+	PINCTRL_PIN_GROUP("uart1", mt7986_uart1),
+	PINCTRL_PIN_GROUP("uart2", mt7986_uart2),
+	PINCTRL_PIN_GROUP("emmc_51", mt7986_emmc_51),
+	PINCTRL_PIN_GROUP("pcm", mt7986_pcm),
+	PINCTRL_PIN_GROUP("i2s", mt7986_i2s),
+	PINCTRL_PIN_GROUP("wf_2g", mt7986_wf_2g),
+	PINCTRL_PIN_GROUP("wf_5g", mt7986_wf_5g),
+	PINCTRL_PIN_GROUP("wf_dbdc", mt7986_wf_dbdc),
+};
+
+static const struct group_desc mt7986b_groups[] = {
+	PINCTRL_PIN_GROUP("watchdog", mt7986_watchdog),
+	PINCTRL_PIN_GROUP("wifi_led", mt7986_wifi_led),
+	PINCTRL_PIN_GROUP("i2c", mt7986_i2c),
+	PINCTRL_PIN_GROUP("uart1_0", mt7986_uart1_0),
+	PINCTRL_PIN_GROUP("pcie_clk", mt7986_pcie_clk),
+	PINCTRL_PIN_GROUP("pcie_wake", mt7986_pcie_wake),
+	PINCTRL_PIN_GROUP("spi1_0", mt7986_spi1_0),
+	PINCTRL_PIN_GROUP("pwm1_1", mt7986_pwm1_1),
+	PINCTRL_PIN_GROUP("pwm0", mt7986_pwm0),
+	PINCTRL_PIN_GROUP("pwm1_0", mt7986_pwm1_0),
+	PINCTRL_PIN_GROUP("emmc_45", mt7986_emmc_45),
+	PINCTRL_PIN_GROUP("snfi", mt7986_snfi),
+	PINCTRL_PIN_GROUP("spi1_1", mt7986_spi1_1),
+	PINCTRL_PIN_GROUP("uart1_1", mt7986_uart1_1),
+	PINCTRL_PIN_GROUP("spi1_2", mt7986_spi1_2),
+	PINCTRL_PIN_GROUP("uart1_2", mt7986_uart1_2),
+	PINCTRL_PIN_GROUP("uart2_0", mt7986_uart2_0),
+	PINCTRL_PIN_GROUP("spi0", mt7986_spi0),
+	PINCTRL_PIN_GROUP("spi0_wp_hold", mt7986_spi0_wp_hold),
+	PINCTRL_PIN_GROUP("uart2_1", mt7986_uart2_1),
+	PINCTRL_PIN_GROUP("uart1_3_rx_tx", mt7986_uart1_3_rx_tx),
+	PINCTRL_PIN_GROUP("uart1_3_cts_rts", mt7986_uart1_3_cts_rts),
+	PINCTRL_PIN_GROUP("spi1_3", mt7986_spi1_3),
+	PINCTRL_PIN_GROUP("uart0", mt7986_uart0),
+	PINCTRL_PIN_GROUP("switch_int", mt7986_switch_int),
+	PINCTRL_PIN_GROUP("mdc_mdio", mt7986_mdc_mdio),
+	PINCTRL_PIN_GROUP("wf_2g", mt7986_wf_2g),
+	PINCTRL_PIN_GROUP("wf_5g", mt7986_wf_5g),
+	PINCTRL_PIN_GROUP("wf_dbdc", mt7986_wf_dbdc),
+};
+
+/* Joint those groups owning the same capability in user point of view which
+ * allows that people tend to use through the device tree.
+ */
+
+static const char *mt7986_audio_groups[] = { "pcm", "i2s" };
+static const char *mt7986_emmc_groups[] = { "emmc_45", "emmc_51", };
+static const char *mt7986_ethernet_groups[] = { "switch_int", "mdc_mdio", };
+static const char *mt7986_i2c_groups[] = { "i2c", };
+static const char *mt7986_led_groups[] = { "wifi_led", };
+static const char *mt7986_flash_groups[] = { "snfi", };
+static const char *mt7986_pcie_groups[] = {
+	"pcie_clk", "pcie_wake", "pcie_pereset" };
+static const char *mt7986_pwm_groups[] = { "pwm0", "pwm1_0", "pwm1_1", };
+static const char *mt7986_spi_groups[] = {
+	"spi0", "spi0_wp_hold", "spi1_0", "spi1_1", "spi1_2", "spi1_3", };
+
+static const char *mt7986_uart_groups[] = {
+	"uart1_0", "uart1_1", "uart1_2", "uart1_3_rx_tx", "uart1_3_cts_rts",
+	"uart2_0", "uart2_1", "uart0", "uart1", "uart2",
+};
+static const char *mt7986_wdt_groups[] = { "watchdog", };
+static const char *mt7986_wf_groups[] = { "wf_2g", "wf_5g", "wf_dbdc", };
+
+static const struct function_desc mt7986_functions[] = {
+	{"audio", mt7986_audio_groups, ARRAY_SIZE(mt7986_audio_groups)},
+	{"emmc", mt7986_emmc_groups, ARRAY_SIZE(mt7986_emmc_groups)},
+	{"eth", mt7986_ethernet_groups, ARRAY_SIZE(mt7986_ethernet_groups)},
+	{"i2c", mt7986_i2c_groups, ARRAY_SIZE(mt7986_i2c_groups)},
+	{"led", mt7986_led_groups, ARRAY_SIZE(mt7986_led_groups)},
+	{"flash", mt7986_flash_groups, ARRAY_SIZE(mt7986_flash_groups)},
+	{"pcie", mt7986_pcie_groups, ARRAY_SIZE(mt7986_pcie_groups)},
+	{"pwm", mt7986_pwm_groups, ARRAY_SIZE(mt7986_pwm_groups)},
+	{"spi", mt7986_spi_groups, ARRAY_SIZE(mt7986_spi_groups)},
+	{"uart", mt7986_uart_groups, ARRAY_SIZE(mt7986_uart_groups)},
+	{"watchdog", mt7986_wdt_groups, ARRAY_SIZE(mt7986_wdt_groups)},
+	{"wifi", mt7986_wf_groups, ARRAY_SIZE(mt7986_wf_groups)},
+};
+
+static const struct mtk_eint_hw mt7986a_eint_hw = {
+	.port_mask = 7,
+	.ports = 7,
+	.ap_num = ARRAY_SIZE(mt7986a_pins),
+	.db_cnt = 16,
+};
+
+static const struct mtk_eint_hw mt7986b_eint_hw = {
+	.port_mask = 7,
+	.ports = 7,
+	.ap_num = ARRAY_SIZE(mt7986b_pins),
+	.db_cnt = 16,
+};
+
+static struct mtk_pin_soc mt7986a_data = {
+	.reg_cal = mt7986a_reg_cals,
+	.pins = mt7986a_pins,
+	.npins = ARRAY_SIZE(mt7986a_pins),
+	.grps = mt7986a_groups,
+	.ngrps = ARRAY_SIZE(mt7986a_groups),
+	.funcs = mt7986_functions,
+	.nfuncs = ARRAY_SIZE(mt7986_functions),
+	.eint_hw = &mt7986a_eint_hw,
+	.gpio_m = 0,
+	.ies_present = false,
+	.base_names = mt7986_pinctrl_register_base_names,
+	.nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
+	.bias_set_combo = mtk_pinconf_bias_set_combo,
+	.bias_get_combo = mtk_pinconf_bias_get_combo,
+	.drive_set = mtk_pinconf_drive_set_rev1,
+	.drive_get = mtk_pinconf_drive_get_rev1,
+	.adv_pull_get = mtk_pinconf_adv_pull_get,
+	.adv_pull_set = mtk_pinconf_adv_pull_set,
+};
+
+static struct mtk_pin_soc mt7986b_data = {
+	.reg_cal = mt7986b_reg_cals,
+	.pins = mt7986b_pins,
+	.npins = ARRAY_SIZE(mt7986b_pins),
+	.grps = mt7986b_groups,
+	.ngrps = ARRAY_SIZE(mt7986b_groups),
+	.funcs = mt7986_functions,
+	.nfuncs = ARRAY_SIZE(mt7986_functions),
+	.eint_hw = &mt7986b_eint_hw,
+	.gpio_m = 0,
+	.ies_present = false,
+	.base_names = mt7986_pinctrl_register_base_names,
+	.nbase_names = ARRAY_SIZE(mt7986_pinctrl_register_base_names),
+	.bias_set_combo = mtk_pinconf_bias_set_combo,
+	.bias_get_combo = mtk_pinconf_bias_get_combo,
+	.drive_set = mtk_pinconf_drive_set_rev1,
+	.drive_get = mtk_pinconf_drive_get_rev1,
+	.adv_pull_get = mtk_pinconf_adv_pull_get,
+	.adv_pull_set = mtk_pinconf_adv_pull_set,
+};
+
+static const struct of_device_id mt7986b_pinctrl_of_match[] = {
+	{.compatible = "mediatek,mt7986b-pinctrl",},
+	{}
+};
+
+static const struct of_device_id mt7986a_pinctrl_of_match[] = {
+	{.compatible = "mediatek,mt7986a-pinctrl",},
+	{}
+};
+
+static int mt7986a_pinctrl_probe(struct platform_device *pdev)
+{
+	return mtk_moore_pinctrl_probe(pdev, &mt7986a_data);
+}
+
+static int mt7986b_pinctrl_probe(struct platform_device *pdev)
+{
+	return mtk_moore_pinctrl_probe(pdev, &mt7986b_data);
+}
+
+static struct platform_driver mt7986a_pinctrl_driver = {
+	.driver = {
+		.name = "mt7986a-pinctrl",
+		.of_match_table = mt7986a_pinctrl_of_match,
+	},
+	.probe = mt7986a_pinctrl_probe,
+};
+
+static struct platform_driver mt7986b_pinctrl_driver = {
+	.driver = {
+		.name = "mt7986b-pinctrl",
+		.of_match_table = mt7986b_pinctrl_of_match,
+	},
+	.probe = mt7986b_pinctrl_probe,
+};
+
+static int __init mt7986a_pinctrl_init(void)
+{
+	return platform_driver_register(&mt7986a_pinctrl_driver);
+}
+
+static int __init mt7986b_pinctrl_init(void)
+{
+	return platform_driver_register(&mt7986b_pinctrl_driver);
+}
+
+arch_initcall(mt7986a_pinctrl_init);
+arch_initcall(mt7986b_pinctrl_init);
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH 07/12] dt-bindings: arm64: dts: mediatek: Add mt7986 series
  2021-07-26  7:14 [PATCH 00/12] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (5 preceding siblings ...)
  2021-07-26  7:14 ` [PATCH 06/12] pinctrl: mediatek: add support " Sam Shih
@ 2021-07-26  7:14 ` Sam Shih
  2021-07-29 22:51   ` Rob Herring
  2021-07-26  7:14 ` [PATCH 08/12] dt-bindings: rng: mediatek: add mt7986 to mtk rng binding Sam Shih
                   ` (4 subsequent siblings)
  11 siblings, 1 reply; 26+ messages in thread
From: Sam Shih @ 2021-07-26  7:14 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

MT7986 is Mediatek's new 4-core SoC, which is mainly for wifi-router
application. The difference between mt7986a and mt7986b is that some
pins do not exist on mt7986b.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 Documentation/devicetree/bindings/arm/mediatek.yaml | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 80a05f6fee85..a9a778269684 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -76,6 +76,14 @@ properties:
           - enum:
               - mediatek,mt7629-rfb
           - const: mediatek,mt7629
+      - items:
+          - enum:
+              - mediatek,mt7986a-rfb
+          - const: mediatek,mt7986a
+      - items:
+          - enum:
+              - mediatek,mt7986b-rfb
+          - const: mediatek,mt7986b
       - items:
           - enum:
               - mediatek,mt8127-moose
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH 08/12] dt-bindings: rng: mediatek: add mt7986 to mtk rng binding
  2021-07-26  7:14 [PATCH 00/12] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (6 preceding siblings ...)
  2021-07-26  7:14 ` [PATCH 07/12] dt-bindings: arm64: dts: mediatek: Add mt7986 series Sam Shih
@ 2021-07-26  7:14 ` Sam Shih
  2021-07-29 22:53   ` Rob Herring
  2021-07-26  7:14 ` [PATCH 09/12] dt-bindings: serial: Add compatible for Mediatek MT7986 Sam Shih
                   ` (3 subsequent siblings)
  11 siblings, 1 reply; 26+ messages in thread
From: Sam Shih @ 2021-07-26  7:14 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

Add RNG binding for MT7986 SoC.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 Documentation/devicetree/bindings/rng/mtk-rng.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/rng/mtk-rng.yaml b/Documentation/devicetree/bindings/rng/mtk-rng.yaml
index 61888e07bda0..bb32491ee8ae 100644
--- a/Documentation/devicetree/bindings/rng/mtk-rng.yaml
+++ b/Documentation/devicetree/bindings/rng/mtk-rng.yaml
@@ -21,6 +21,7 @@ properties:
           - enum:
               - mediatek,mt7622-rng
               - mediatek,mt7629-rng
+              - mediatek,mt7986-rng
               - mediatek,mt8365-rng
               - mediatek,mt8516-rng
           - const: mediatek,mt7623-rng
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH 09/12] dt-bindings: serial: Add compatible for Mediatek MT7986
  2021-07-26  7:14 [PATCH 00/12] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (7 preceding siblings ...)
  2021-07-26  7:14 ` [PATCH 08/12] dt-bindings: rng: mediatek: add mt7986 to mtk rng binding Sam Shih
@ 2021-07-26  7:14 ` Sam Shih
  2021-07-26  7:14 ` [PATCH 10/12] dt-bindings: watchdog: " Sam Shih
                   ` (2 subsequent siblings)
  11 siblings, 0 replies; 26+ messages in thread
From: Sam Shih @ 2021-07-26  7:14 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

This commit adds dt-binding documentation of uart for Mediatek MT7986 SoC
Platform.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 Documentation/devicetree/bindings/serial/mtk-uart.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/serial/mtk-uart.txt b/Documentation/devicetree/bindings/serial/mtk-uart.txt
index 64c4fb59acd1..b3a0bfef0d54 100644
--- a/Documentation/devicetree/bindings/serial/mtk-uart.txt
+++ b/Documentation/devicetree/bindings/serial/mtk-uart.txt
@@ -15,6 +15,7 @@ Required properties:
   * "mediatek,mt7622-uart" for MT7622 compatible UARTS
   * "mediatek,mt7623-uart" for MT7623 compatible UARTS
   * "mediatek,mt7629-uart" for MT7629 compatible UARTS
+  * "mediatek,mt7986-uart", "mediatek,mt6577-uart" for MT7986 compatible UARTS
   * "mediatek,mt8127-uart" for MT8127 compatible UARTS
   * "mediatek,mt8135-uart" for MT8135 compatible UARTS
   * "mediatek,mt8173-uart" for MT8173 compatible UARTS
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH 10/12] dt-bindings: watchdog: Add compatible for Mediatek MT7986
  2021-07-26  7:14 [PATCH 00/12] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (8 preceding siblings ...)
  2021-07-26  7:14 ` [PATCH 09/12] dt-bindings: serial: Add compatible for Mediatek MT7986 Sam Shih
@ 2021-07-26  7:14 ` Sam Shih
  2021-07-29 22:53   ` Rob Herring
  2021-08-01 20:48   ` Guenter Roeck
  2021-07-26  7:14 ` [PATCH 11/12] arm64: dts: mediatek: add mt7986a support Sam Shih
  2021-07-26  7:14 ` [PATCH 12/12] arm64: dts: mediatek: add mt7986b support Sam Shih
  11 siblings, 2 replies; 26+ messages in thread
From: Sam Shih @ 2021-07-26  7:14 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

This commit adds dt-binding documentation of watchdog for Mediatek MT7986
SoC Platform.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 Documentation/devicetree/bindings/watchdog/mtk-wdt.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index 416d716403f6..a4e31ce96e0e 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -13,6 +13,7 @@ Required properties:
 	"mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
 	"mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623
 	"mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629
+	"mediatek,mt7986-wdt", "mediatek,mt6589-wdt": for MT7986
 	"mediatek,mt8183-wdt": for MT8183
 	"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
 	"mediatek,mt8192-wdt": for MT8192
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH 11/12] arm64: dts: mediatek: add mt7986a support
  2021-07-26  7:14 [PATCH 00/12] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (9 preceding siblings ...)
  2021-07-26  7:14 ` [PATCH 10/12] dt-bindings: watchdog: " Sam Shih
@ 2021-07-26  7:14 ` Sam Shih
  2021-07-26  7:14 ` [PATCH 12/12] arm64: dts: mediatek: add mt7986b support Sam Shih
  11 siblings, 0 replies; 26+ messages in thread
From: Sam Shih @ 2021-07-26  7:14 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

Add basic chip support for Mediatek mt7986a, include
uart nodes with correct clocks, rng node with correct clock,
watchdog node and mt7986a pinctrl node.

Add cpu node, timer node, gic node, psci and reserved-memory node
for ARM Trusted Firmware,

Add clock controller nodes, include 40M clock source, topckgen, infracfg,
infracfg_ao (always on), apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/Makefile        |   1 +
 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts |  49 ++++
 arch/arm64/boot/dts/mediatek/mt7986a.dtsi    | 235 +++++++++++++++++++
 3 files changed, 285 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986a.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 4f68ebed2e31..e6c3a73b9e4a 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
new file mode 100644
index 000000000000..a58347c09ab2
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986a.dtsi"
+
+/ {
+	model = "MediaTek MT7986a RFB";
+	compatible = "mediatek,mt7986a-rfb";
+	chosen {
+		bootargs = "console=ttyS0,115200n1 loglevel=8  \
+				earlycon=uart8250,mmio32,0x11002000";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&pio {
+	uart1_pins: uart1-pins-42-to-45 {
+		mux {
+			function = "uart";
+			groups = "uart1";
+		};
+	};
+
+	uart2_pins: uart1-pins-46-to-49 {
+		mux {
+			function = "uart";
+			groups = "uart2";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
new file mode 100644
index 000000000000..0fcaf70a4a71
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+
+/ {
+	compatible = "mediatek,mt7986a";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c080000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		infracfg_ao: infracfg_ao@10001000 {
+			compatible = "mediatek,mt7986-infracfg_ao", "syscon";
+			reg = <0 0x10001000 0 0x68>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001040 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x1000106c 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986a-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+				    "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+				    "iocfg_tl_base", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 100>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys",
+				     "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys",
+				     "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg_ao CK_INFRA_TRNG_CK>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg_ao CK_INFRA_UART0_SEL>,
+				 <&infracfg_ao CK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CK_TOP_UART_SEL>,
+					  <&infracfg_ao CK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>,
+						 <&infracfg CK_INFRA_UART>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg_ao CK_INFRA_UART1_SEL>,
+				 <&infracfg_ao CK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg_ao CK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg_ao CK_INFRA_UART2_SEL>,
+				 <&infracfg_ao CK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg_ao CK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>;
+			status = "disabled";
+		};
+
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
+	};
+
+};
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* [PATCH 12/12] arm64: dts: mediatek: add mt7986b support
  2021-07-26  7:14 [PATCH 00/12] Add basic SoC support for mediatek mt7986 Sam Shih
                   ` (10 preceding siblings ...)
  2021-07-26  7:14 ` [PATCH 11/12] arm64: dts: mediatek: add mt7986a support Sam Shih
@ 2021-07-26  7:14 ` Sam Shih
  11 siblings, 0 replies; 26+ messages in thread
From: Sam Shih @ 2021-07-26  7:14 UTC (permalink / raw)
  To: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk
  Cc: John Crispin, Ryder Lee, Sam Shih

Add basic chip support for Mediatek mt7986b, include
uart nodes with correct clocks, rng node with correct clock,
watchdog node and mt7986b pinctrl node.

Add cpu node, timer node, gic node, psci and reserved-memory node
for ARM Trusted Firmware,

Add clock controller nodes, include 40M clock source, topckgen, infracfg,
infracfg_ao (always on), apmixedsys and ethernet subsystem.

Signed-off-by: Sam Shih <sam.shih@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/Makefile        |   1 +
 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts |  21 ++
 arch/arm64/boot/dts/mediatek/mt7986b.dtsi    | 235 +++++++++++++++++++
 3 files changed, 257 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt7986b.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index e6c3a73b9e4a..d555e43d1ccc 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -8,6 +8,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt6797-x20-dev.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-rfb1.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7622-bananapi-bpi-r64.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986a-rfb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt7986b-rfb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8167-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8173-elm-hana.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
new file mode 100644
index 000000000000..8296f1d27e77
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+/dts-v1/;
+#include "mt7986b.dtsi"
+
+/ {
+	model = "MediaTek MT7986b RFB";
+	compatible = "mediatek,mt7986b-rfb";
+	chosen {
+		bootargs = "console=ttyS0,115200n1 loglevel=8  \
+				earlycon=uart8250,mmio32,0x11002000";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b.dtsi b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
new file mode 100644
index 000000000000..4b001729b50e
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt7986b.dtsi
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2021 MediaTek Inc.
+ * Author: Sam.Shih <sam.shih@mediatek.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/mt7986-clk.h>
+
+/ {
+	compatible = "mediatek,mt7986b";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	clk40m: oscillator@0 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <40000000>;
+		clock-output-names = "clkxtal";
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x0>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x1>;
+			#cooling-cells = <2>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			enable-method = "psci";
+			reg = <0x2>;
+			#cooling-cells = <2>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			enable-method = "psci";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	psci {
+		compatible  = "arm,psci-0.2";
+		method      = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		/* 192 KiB reserved for ARM Trusted Firmware (BL31) */
+		secmon_reserved: secmon@43000000 {
+			reg = <0 0x43000000 0 0x30000>;
+			no-map;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		clock-frequency = <13000000>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x40000>,
+			      <0 0x0c080000 0 0x200000>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		infracfg_ao: infracfg_ao@10001000 {
+			compatible = "mediatek,mt7986-infracfg_ao", "syscon";
+			reg = <0 0x10001000 0 0x68>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: infracfg@10001040 {
+			compatible = "mediatek,mt7986-infracfg", "syscon";
+			reg = <0 0x1000106c 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		topckgen: topckgen@1001b000 {
+			compatible = "mediatek,mt7986-topckgen", "syscon";
+			reg = <0 0x1001B000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		watchdog: watchdog@1001c000 {
+			compatible = "mediatek,mt7986-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x1001c000 0 0x1000>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			#reset-cells = <1>;
+			status = "disabled";
+		};
+
+		apmixedsys: apmixedsys@1001e000 {
+			compatible = "mediatek,mt7986-apmixedsys";
+			reg = <0 0x1001E000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pio: pinctrl@1001f000 {
+			compatible = "mediatek,mt7986b-pinctrl";
+			reg = <0 0x1001f000 0 0x1000>,
+			      <0 0x11c30000 0 0x1000>,
+			      <0 0x11c40000 0 0x1000>,
+			      <0 0x11e20000 0 0x1000>,
+			      <0 0x11e30000 0 0x1000>,
+			      <0 0x11f00000 0 0x1000>,
+			      <0 0x11f10000 0 0x1000>,
+			      <0 0x1000b000 0 0x1000>;
+			reg-names = "gpio_base", "iocfg_rt_base", "iocfg_rb_base",
+				    "iocfg_lt_base", "iocfg_lb_base", "iocfg_tr_base",
+				    "iocfg_tl_base", "eint";
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pio 0 0 41>, <&pio 66 66 35>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <2>;
+		};
+
+		sgmiisys0: syscon@10060000 {
+			compatible = "mediatek,mt7986-sgmiisys",
+				     "mediatek,mt7986-sgmiisys_0",
+				     "syscon";
+			reg = <0 0x10060000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		sgmiisys1: syscon@10070000 {
+			compatible = "mediatek,mt7986-sgmiisys",
+				     "mediatek,mt7986-sgmiisys_1",
+				     "syscon";
+			reg = <0 0x10070000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		trng: trng@1020f000 {
+			compatible = "mediatek,mt7986-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg_ao CK_INFRA_TRNG_CK>;
+			clock-names = "rng";
+			status = "disabled";
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg_ao CK_INFRA_UART0_SEL>,
+				 <&infracfg_ao CK_INFRA_UART0_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&topckgen CK_TOP_UART_SEL>,
+					  <&infracfg_ao CK_INFRA_UART0_SEL>;
+			assigned-clock-parents = <&topckgen CK_TOP_CB_CKSQ_40M>,
+						 <&infracfg CK_INFRA_UART>;
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x400>;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg_ao CK_INFRA_UART1_SEL>,
+				 <&infracfg_ao CK_INFRA_UART1_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg_ao CK_INFRA_UART1_SEL>;
+			assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>;
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt7986-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x400>;
+			interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg_ao CK_INFRA_UART2_SEL>,
+				 <&infracfg_ao CK_INFRA_UART2_CK>;
+			clock-names = "baud", "bus";
+			assigned-clocks = <&infracfg_ao CK_INFRA_UART2_SEL>;
+			assigned-clock-parents = <&infracfg CK_INFRA_CK_F26M>;
+			status = "disabled";
+		};
+
+		ethsys: syscon@15000000 {
+			 #address-cells = <1>;
+			 #size-cells = <1>;
+			 compatible = "mediatek,mt7986-ethsys",
+				      "syscon";
+			 reg = <0 0x15000000 0 0x1000>;
+			 #clock-cells = <1>;
+			 #reset-cells = <1>;
+		};
+
+	};
+
+};
-- 
2.29.2


^ permalink raw reply related	[flat|nested] 26+ messages in thread

* Re: [PATCH 01/12] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
  2021-07-26  7:14 ` [PATCH 01/12] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC Sam Shih
@ 2021-07-26  9:20   ` Chen-Yu Tsai
  2021-07-30  6:01     ` Sam Shih
  0 siblings, 1 reply; 26+ messages in thread
From: Chen-Yu Tsai @ 2021-07-26  9:20 UTC (permalink / raw)
  To: Sam Shih
  Cc: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang,
	Devicetree List, LKML, moderated list:ARM/Mediatek SoC support,
	linux-gpio,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	linux-crypto, linux-serial, linux-watchdog, linux-clk,
	John Crispin, Ryder Lee

On Mon, Jul 26, 2021 at 3:17 PM Sam Shih <sam.shih@mediatek.com> wrote:
>
> This patch adds the binding documentation for topckgen, apmixedsys,
> infracfg, infracfg_ao, and ethernet subsystem clocks.
>
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> ---
>  .../devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt    | 1 +
>  .../devicetree/bindings/arm/mediatek/mediatek,ethsys.txt        | 1 +
>  .../devicetree/bindings/arm/mediatek/mediatek,infracfg.txt      | 2 ++
>  .../devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt      | 2 ++
>  .../devicetree/bindings/arm/mediatek/mediatek,topckgen.txt      | 1 +
>  5 files changed, 7 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
> index ea827e8763de..3fa755866528 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,apmixedsys.txt
> @@ -14,6 +14,7 @@ Required Properties:
>         - "mediatek,mt7622-apmixedsys"
>         - "mediatek,mt7623-apmixedsys", "mediatek,mt2701-apmixedsys"
>         - "mediatek,mt7629-apmixedsys"
> +       - "mediatek,mt7986-apmixedsys"
>         - "mediatek,mt8135-apmixedsys"
>         - "mediatek,mt8167-apmixedsys", "syscon"
>         - "mediatek,mt8173-apmixedsys"
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> index 6b7e8067e7aa..0502db73686b 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,ethsys.txt
> @@ -10,6 +10,7 @@ Required Properties:
>         - "mediatek,mt7622-ethsys", "syscon"
>         - "mediatek,mt7623-ethsys", "mediatek,mt2701-ethsys", "syscon"
>         - "mediatek,mt7629-ethsys", "syscon"
> +       - "mediatek,mt7986-ethsys", "syscon"
>  - #clock-cells: Must be 1
>  - #reset-cells: Must be 1
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
> index eb3523c7a7be..5f68c30162bf 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,infracfg.txt
> @@ -15,6 +15,8 @@ Required Properties:
>         - "mediatek,mt7622-infracfg", "syscon"
>         - "mediatek,mt7623-infracfg", "mediatek,mt2701-infracfg", "syscon"
>         - "mediatek,mt7629-infracfg", "syscon"
> +       - "mediatek,mt7986-infracfg", "syscon"
> +       - "mediatek,mt7986-infracfg_ao", "syscon"
>         - "mediatek,mt8135-infracfg", "syscon"
>         - "mediatek,mt8167-infracfg", "syscon"
>         - "mediatek,mt8173-infracfg", "syscon"
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
> index 30cb645c0e54..0e1184392941 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt
> @@ -8,6 +8,8 @@ Required Properties:
>  - compatible: Should be:
>         - "mediatek,mt7622-sgmiisys", "syscon"
>         - "mediatek,mt7629-sgmiisys", "syscon"
> +       - "mediatek,mt7986-sgmiisys", "mediatek,mt7986-sgmiisys_0", "syscon"
> +       - "mediatek,mt7986-sgmiisys", "mediatek,mt7986-sgmiisys_1", "syscon"

The order should be: most specific compatible string first, followed by
fallbacks.

Furthermore, based on the driver patch and the fact that they share the
same compatible string, it seems you shouldn't need to have two compatible
strings for two identical hardware blocks. The need for separate entries
to have different clock names is an implementation detail. Please consider
using and supporting clock-output-names.

Also, please check out the MT8195 clock driver series [1]. I'm guessing
a lot of the comments apply to this one as well.

Regards
ChenYu

[1] https://lore.kernel.org/linux-mediatek/20210616224743.5109-1-chun-jie.chen@mediatek.com/T/#t


>  - #clock-cells: Must be 1
>
>  The SGMIISYS controller uses the common clk binding from
> diff --git a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
> index 5ce7578cf274..b82422bb717f 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
> +++ b/Documentation/devicetree/bindings/arm/mediatek/mediatek,topckgen.txt
> @@ -14,6 +14,7 @@ Required Properties:
>         - "mediatek,mt7622-topckgen"
>         - "mediatek,mt7623-topckgen", "mediatek,mt2701-topckgen"
>         - "mediatek,mt7629-topckgen"
> +       - "mediatek,mt7986-topckgen", "syscon"
>         - "mediatek,mt8135-topckgen"
>         - "mediatek,mt8167-topckgen", "syscon"
>         - "mediatek,mt8173-topckgen"
> --
> 2.29.2
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH 04/12] pinctrl: mediatek: moore: use pin number in mtk_pin_desc instead of array index
  2021-07-26  7:14 ` [PATCH 04/12] pinctrl: mediatek: moore: use pin number in mtk_pin_desc instead of array index Sam Shih
@ 2021-07-28 18:26   ` Sean Wang
  0 siblings, 0 replies; 26+ messages in thread
From: Sean Wang @ 2021-07-28 18:26 UTC (permalink / raw)
  To: Sam Shih
  Cc: Rob Herring, Linus Walleij, Matthias Brugger, Matt Mackall,
	Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck, Guenter Roeck,
	Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang,
	open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, lkml,
	moderated list:ARM/Mediatek SoC support,
	open list:GPIO SUBSYSTEM, linux-arm Mailing List, linux-crypto,
	linux-serial, linux-watchdog, linux-clk, John Crispin, Ryder Lee

 Hi Sam,

On Mon, Jul 26, 2021 at 12:17 AM Sam Shih <sam.shih@mediatek.com> wrote:
>
> Certain SoC are missing the middle part gpios in consecutive pins,
> it's better to use pin number in mtk_pin_desc instead of array index
> for the extensibility

Now the driver pin number has to be consistent with the array index
because the driver would use pin number as the array index to fetch
the pin descriptor.

For those missing GPIOs, we could just fill out .name in struct
mtk_pin_desc as NULL to indicate the pin is unavailable for users (pin
not ballout) on the certain SoC and then allow us to reuse all of the
pinctrl operations with minimal modification.

>
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> ---
>  drivers/pinctrl/mediatek/pinctrl-moore.c | 61 ++++++++++++++++++++++++
>  1 file changed, 61 insertions(+)
>
> diff --git a/drivers/pinctrl/mediatek/pinctrl-moore.c b/drivers/pinctrl/mediatek/pinctrl-moore.c
> index 3a4a23c40a71..16206254ec3d 100644
> --- a/drivers/pinctrl/mediatek/pinctrl-moore.c
> +++ b/drivers/pinctrl/mediatek/pinctrl-moore.c
> @@ -35,6 +35,19 @@ static const struct pin_config_item mtk_conf_items[] = {
>  };
>  #endif
>
> +static int mtk_pin_desc_lookup(struct mtk_pinctrl *hw, int pin)
> +{
> +       int idx;
> +
> +       for (idx = 0 ; idx < hw->soc->npins ; idx++)
> +               if (hw->soc->pins[idx].number == pin)
> +                       break;
> +       if (idx < hw->soc->npins)
> +               return idx;
> +
> +       return -EINVAL;
> +}
> +
>  static int mtk_pinmux_set_mux(struct pinctrl_dev *pctldev,
>                               unsigned int selector, unsigned int group)
>  {
> @@ -74,6 +87,13 @@ static int mtk_pinmux_gpio_request_enable(struct pinctrl_dev *pctldev,
>  {
>         struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
>         const struct mtk_pin_desc *desc;
> +       int err;
> +
> +       err = mtk_pin_desc_lookup(hw, pin);
> +       if (err >= 0)
> +               pin = err;
> +       else
> +               return err;
>

We can drop it and use the following snippet instead

desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];

/* !desc->name to show the pin is not ballout */
if (!desc->name)
         return -ENOTSUPP;

>         desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
>
> @@ -87,6 +107,13 @@ static int mtk_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
>  {
>         struct mtk_pinctrl *hw = pinctrl_dev_get_drvdata(pctldev);
>         const struct mtk_pin_desc *desc;
> +       int err;
> +
> +       err = mtk_pin_desc_lookup(hw, pin);
> +       if (err >= 0)
> +               pin = err;
> +       else
> +               return err;
>

Ditto

>         desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
>
> @@ -102,6 +129,12 @@ static int mtk_pinconf_get(struct pinctrl_dev *pctldev,
>         int val, val2, err, reg, ret = 1;
>         const struct mtk_pin_desc *desc;
>
> +       err = mtk_pin_desc_lookup(hw, pin);
> +       if (err >= 0)
> +               pin = err;
> +       else
> +               return err;
> +

Ditto

>         desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
>
>         switch (param) {
> @@ -217,6 +250,12 @@ static int mtk_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
>         u32 reg, param, arg;
>         int cfg, err = 0;
>
> +       err = mtk_pin_desc_lookup(hw, pin);
> +       if (err >= 0)
> +               pin = err;
> +       else
> +               return err;
> +

Ditto

>         desc = (const struct mtk_pin_desc *)&hw->soc->pins[pin];
>
>         for (cfg = 0; cfg < num_configs; cfg++) {
> @@ -434,6 +473,12 @@ static int mtk_gpio_get(struct gpio_chip *chip, unsigned int gpio)
>         const struct mtk_pin_desc *desc;
>         int value, err;
>
> +       err = mtk_pin_desc_lookup(hw, gpio);
> +       if (err >= 0)
> +               gpio = err;
> +       else
> +               return err;
> +

Ditto

>         desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
>
>         err = mtk_hw_get_value(hw, desc, PINCTRL_PIN_REG_DI, &value);
> @@ -447,6 +492,15 @@ static void mtk_gpio_set(struct gpio_chip *chip, unsigned int gpio, int value)
>  {
>         struct mtk_pinctrl *hw = gpiochip_get_data(chip);
>         const struct mtk_pin_desc *desc;
> +       int err;
> +
> +       err = mtk_pin_desc_lookup(hw, gpio);
> +       if (err >= 0) {
> +               gpio = err;
> +       } else {
> +               dev_err(hw->dev, "Failed to set gpio %d\n", gpio);
> +               return;
> +       }
>

Ditto

>         desc = (const struct mtk_pin_desc *)&hw->soc->pins[gpio];
>
> @@ -488,6 +542,13 @@ static int mtk_gpio_set_config(struct gpio_chip *chip, unsigned int offset,
>         struct mtk_pinctrl *hw = gpiochip_get_data(chip);
>         const struct mtk_pin_desc *desc;
>         u32 debounce;
> +       int err;
> +
> +       err = mtk_pin_desc_lookup(hw, offset);
> +       if (err >= 0)
> +               offset = err;
> +       else
> +               return err;
>

Ditto

>         desc = (const struct mtk_pin_desc *)&hw->soc->pins[offset];
>
> --
> 2.29.2
>

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH 02/12] clk: mediatek: add mt7986 clock IDs
  2021-07-26  7:14 ` [PATCH 02/12] clk: mediatek: add mt7986 clock IDs Sam Shih
@ 2021-07-29 22:48   ` Rob Herring
  0 siblings, 0 replies; 26+ messages in thread
From: Rob Herring @ 2021-07-29 22:48 UTC (permalink / raw)
  To: Sam Shih
  Cc: Sean Wang, Linus Walleij, Matthias Brugger, Matt Mackall,
	Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck, Guenter Roeck,
	Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk,
	John Crispin, Ryder Lee

On Mon, Jul 26, 2021 at 03:14:29PM +0800, Sam Shih wrote:
> Add MT7986 clock dt-bindings, include topckgen, apmixedsys,
> infracfg, infracfg_ao, and ethernet subsystem clocks.
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> ---
>  include/dt-bindings/clock/mt7986-clk.h | 244 +++++++++++++++++++++++++
>  1 file changed, 244 insertions(+)
>  create mode 100644 include/dt-bindings/clock/mt7986-clk.h
> 
> diff --git a/include/dt-bindings/clock/mt7986-clk.h b/include/dt-bindings/clock/mt7986-clk.h
> new file mode 100644
> index 000000000000..dd11d0a717bc
> --- /dev/null
> +++ b/include/dt-bindings/clock/mt7986-clk.h
> @@ -0,0 +1,244 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */

Dual license please.

This should be part of the binding patch.

> +/*
> + * Copyright (c) 2021 MediaTek Inc.
> + * Author: Sam Shih <sam.shih@mediatek.com>
> + */
> +
> +#ifndef _DT_BINDINGS_CLK_MT7986_H
> +#define _DT_BINDINGS_CLK_MT7986_H
> +
> +/* INFRACFG */
> +
> +#define CK_INFRA_CK_F26M		0
> +#define CK_INFRA_UART			1
> +#define CK_INFRA_ISPI0			2
> +#define CK_INFRA_I2C			3
> +#define CK_INFRA_ISPI1			4
> +#define CK_INFRA_PWM			5
> +#define CK_INFRA_66M_MCK		6
> +#define CK_INFRA_CK_F32K		7
> +#define CK_INFRA_PCIE_CK		8
> +#define CK_INFRA_PWM_BCK		9
> +#define CK_INFRA_PWM_CK1		10
> +#define CK_INFRA_PWM_CK2		11
> +#define CK_INFRA_133M_HCK		12
> +#define CK_INFRA_EIP_CK			13
> +#define CK_INFRA_66M_PHCK		14
> +#define CK_INFRA_FAUD_L_CK		15
> +#define CK_INFRA_FAUD_AUD_CK		16
> +#define CK_INFRA_FAUD_EG2_CK		17
> +#define CK_INFRA_I2CS_CK		18
> +#define CK_INFRA_MUX_UART0		19
> +#define CK_INFRA_MUX_UART1		20
> +#define CK_INFRA_MUX_UART2		21
> +#define CK_INFRA_NFI_CK			22
> +#define CK_INFRA_SPINFI_CK		23
> +#define CK_INFRA_MUX_SPI0		24
> +#define CK_INFRA_MUX_SPI1		25
> +#define CK_INFRA_RTC_32K		26
> +#define CK_INFRA_FMSDC_CK		27
> +#define CK_INFRA_FMSDC_HCK_CK		28
> +#define CK_INFRA_PERI_133M		29
> +#define CK_INFRA_133M_PHCK		30
> +#define CK_INFRA_USB_SYS_CK		31
> +#define CK_INFRA_USB_CK			32
> +#define CK_INFRA_USB_XHCI_CK		33
> +#define CK_INFRA_PCIE_GFMUX_TL_O_PRE	34
> +#define CK_INFRA_F26M_CK0		35
> +#define CK_INFRA_HD_133M	        36
> +#define CLK_INFRA_NR_CLK		37
> +
> +/* TOPCKGEN */
> +
> +#define CK_TOP_CB_CKSQ_40M		0
> +#define CK_TOP_CB_M_416M		1
> +#define CK_TOP_CB_M_D2			2
> +#define CK_TOP_CB_M_D4			3
> +#define CK_TOP_CB_M_D8			4
> +#define CK_TOP_M_D8_D2			5
> +#define CK_TOP_M_D3_D2			6
> +#define CK_TOP_CB_MM_D2			7
> +#define CK_TOP_CB_MM_D4			8
> +#define CK_TOP_CB_MM_D8			9
> +#define CK_TOP_MM_D8_D2			10
> +#define CK_TOP_MM_D3_D8			11
> +#define CK_TOP_CB_U2_PHYD_CK		12
> +#define CK_TOP_CB_APLL2_196M		13
> +#define CK_TOP_APLL2_D4			14
> +#define CK_TOP_CB_NET1_D4		15
> +#define CK_TOP_CB_NET1_D5		16
> +#define CK_TOP_NET1_D5_D2		17
> +#define CK_TOP_NET1_D5_D4		18
> +#define CK_TOP_NET1_D8_D2		19
> +#define CK_TOP_NET1_D8_D4		20
> +#define CK_TOP_CB_NET2_800M		21
> +#define CK_TOP_CB_NET2_D4		22
> +#define CK_TOP_NET2_D4_D2		23
> +#define CK_TOP_NET2_D3_D2		24
> +#define CK_TOP_CB_WEDMCU_760M		25
> +#define CK_TOP_WEDMCU_D5_D2		26
> +#define CK_TOP_CB_SGM_325M		27
> +#define CK_TOP_CB_CKSQ_40M_D2		28
> +#define CK_TOP_CB_RTC_32K		29
> +#define CK_TOP_CB_RTC_32P7K		30
> +#define CK_TOP_NFI1X			31
> +#define CK_TOP_USB_EQ_RX250M		32
> +#define CK_TOP_USB_TX250M		33
> +#define CK_TOP_USB_LN0_CK		34
> +#define CK_TOP_USB_CDR_CK		35
> +#define CK_TOP_SPINFI_BCK		36
> +#define CK_TOP_I2C_BCK			37
> +#define CK_TOP_PEXTP_TL			38
> +#define CK_TOP_EMMC_250M		39
> +#define CK_TOP_EMMC_416M		40
> +#define CK_TOP_F_26M_ADC_CK		41
> +#define CK_TOP_SYSAXI			42
> +#define CK_TOP_NETSYS_WED_MCU		43
> +#define CK_TOP_NETSYS_2X		44
> +#define CK_TOP_SGM_325M			45
> +#define CK_TOP_A1SYS			46
> +#define CK_TOP_EIP_B			47
> +#define CK_TOP_F26M			48
> +#define CK_TOP_AUD_L			49
> +#define CK_TOP_A_TUNER			50
> +#define CK_TOP_U2U3_REF			51
> +#define CK_TOP_U2U3_SYS			52
> +#define CK_TOP_U2U3_XHCI		53
> +#define CK_TOP_AP2CNN_HOST		54
> +#define CK_TOP_NFI1X_SEL		55
> +#define CK_TOP_SPINFI_SEL		56
> +#define CK_TOP_SPI_SEL			57
> +#define CK_TOP_SPIM_MST_SEL		58
> +#define CK_TOP_UART_SEL			59
> +#define CK_TOP_PWM_SEL			60
> +#define CK_TOP_I2C_SEL			61
> +#define CK_TOP_PEXTP_TL_SEL		62
> +#define CK_TOP_EMMC_250M_SEL		63
> +#define CK_TOP_EMMC_416M_SEL		64
> +#define CK_TOP_F_26M_ADC_SEL		65
> +#define CK_TOP_DRAMC_SEL		66
> +#define CK_TOP_DRAMC_MD32_SEL		67
> +#define CK_TOP_SYSAXI_SEL		68
> +#define CK_TOP_SYSAPB_SEL		69
> +#define CK_TOP_ARM_DB_MAIN_SEL		70
> +#define CK_TOP_ARM_DB_JTSEL		71
> +#define CK_TOP_NETSYS_SEL		72
> +#define CK_TOP_NETSYS_500M_SEL		73
> +#define CK_TOP_NETSYS_MCU_SEL		74
> +#define CK_TOP_NETSYS_2X_SEL		75
> +#define CK_TOP_SGM_325M_SEL		76
> +#define CK_TOP_SGM_REG_SEL		77
> +#define CK_TOP_A1SYS_SEL		78
> +#define CK_TOP_CONN_MCUSYS_SEL		79
> +#define CK_TOP_EIP_B_SEL		80
> +#define CK_TOP_PCIE_PHY_SEL		81
> +#define CK_TOP_USB3_PHY_SEL		82
> +#define CK_TOP_F26M_SEL			83
> +#define CK_TOP_AUD_L_SEL		84
> +#define CK_TOP_A_TUNER_SEL		85
> +#define CK_TOP_U2U3_SEL			86
> +#define CK_TOP_U2U3_SYS_SEL		87
> +#define CK_TOP_U2U3_XHCI_SEL		88
> +#define CK_TOP_DA_U2_REFSEL		89
> +#define CK_TOP_DA_U2_CK_1P_SEL		90
> +#define CK_TOP_AP2CNN_HOST_SEL		91
> +#define CLK_TOP_NR_CLK			92
> +
> +/* INFRACFG_AO */
> +
> +#define CK_INFRA_UART0_SEL		0
> +#define CK_INFRA_UART1_SEL		1
> +#define CK_INFRA_UART2_SEL		2
> +#define CK_INFRA_SPI0_SEL		3
> +#define CK_INFRA_SPI1_SEL		4
> +#define CK_INFRA_PWM1_SEL		5
> +#define CK_INFRA_PWM2_SEL		6
> +#define CK_INFRA_PWM_BSEL		7
> +#define CK_INFRA_PCIE_SEL		8
> +#define CK_INFRA_GPT_STA		9
> +#define CK_INFRA_PWM_HCK		10
> +#define CK_INFRA_PWM_STA		11
> +#define CK_INFRA_PWM1_CK		12
> +#define CK_INFRA_PWM2_CK		13
> +#define CK_INFRA_CQ_DMA_CK		14
> +#define CK_INFRA_EIP97_CK		15
> +#define CK_INFRA_AUD_BUS_CK		16
> +#define CK_INFRA_AUD_26M_CK		17
> +#define CK_INFRA_AUD_L_CK		18
> +#define CK_INFRA_AUD_AUD_CK		19
> +#define CK_INFRA_AUD_EG2_CK		20
> +#define CK_INFRA_DRAMC_26M_CK		21
> +#define CK_INFRA_DBG_CK			22
> +#define CK_INFRA_AP_DMA_CK		23
> +#define CK_INFRA_SEJ_CK			24
> +#define CK_INFRA_SEJ_13M_CK		25
> +#define CK_INFRA_THERM_CK		26
> +#define CK_INFRA_I2CO_CK		27
> +#define CK_INFRA_UART0_CK		28
> +#define CK_INFRA_UART1_CK		29
> +#define CK_INFRA_UART2_CK		30
> +#define CK_INFRA_NFI1_CK		31
> +#define CK_INFRA_SPINFI1_CK		32
> +#define CK_INFRA_NFI_HCK_CK		33
> +#define CK_INFRA_SPI0_CK		34
> +#define CK_INFRA_SPI1_CK		35
> +#define CK_INFRA_SPI0_HCK_CK		36
> +#define CK_INFRA_SPI1_HCK_CK		37
> +#define CK_INFRA_FRTC_CK		38
> +#define CK_INFRA_MSDC_CK		39
> +#define CK_INFRA_MSDC_HCK_CK		40
> +#define CK_INFRA_MSDC_133M_CK		41
> +#define CK_INFRA_MSDC_66M_CK		42
> +#define CK_INFRA_ADC_26M_CK		43
> +#define CK_INFRA_ADC_FRC_CK		44
> +#define CK_INFRA_FBIST2FPC_CK		45
> +#define CK_INFRA_IUSB_133_CK		46
> +#define CK_INFRA_IUSB_66M_CK		47
> +#define CK_INFRA_IUSB_SYS_CK		48
> +#define CK_INFRA_IUSB_CK		49
> +#define CK_INFRA_IPCIE_CK		50
> +#define CK_INFRA_IPCIE_PIPE_CK  51
> +#define CK_INFRA_IPCIER_CK		52
> +#define CK_INFRA_IPCIEB_CK		53
> +#define CK_INFRA_TRNG_CK		54
> +#define CLK_INFRA_AO_NR_CLK		55
> +
> +/* APMIXEDSYS */
> +
> +#define CK_APMIXED_ARMPLL		0
> +#define CK_APMIXED_NET2PLL		1
> +#define CK_APMIXED_MMPLL		2
> +#define CK_APMIXED_SGMPLL		3
> +#define CK_APMIXED_WEDMCUPLL		4
> +#define CK_APMIXED_NET1PLL		5
> +#define CK_APMIXED_MPLL			6
> +#define CK_APMIXED_APLL2		7
> +#define CLK_APMIXED_NR_CLK		8
> +
> +/* SGMIISYS_0 */
> +
> +#define CK_SGM0_TX_EN			0
> +#define CK_SGM0_RX_EN			1
> +#define CK_SGM0_CK0_EN			2
> +#define CK_SGM0_CDR_CK0_EN		3
> +#define CLK_SGMII0_NR_CLK		4
> +
> +/* SGMIISYS_1 */
> +
> +#define CK_SGM1_TX_EN			0
> +#define CK_SGM1_RX_EN			1
> +#define CK_SGM1_CK1_EN			2
> +#define CK_SGM1_CDR_CK1_EN		3
> +#define CLK_SGMII1_NR_CLK		4
> +
> +/* ETHSYS */
> +
> +#define CK_ETH_FE_EN			0
> +#define CK_ETH_GP2_EN			1
> +#define CK_ETH_GP1_EN			2
> +#define CK_ETH_WOCPU1_EN		3
> +#define CK_ETH_WOCPU0_EN		4
> +#define CLK_ETH_NR_CLK			5
> +
> +#endif /* _DT_BINDINGS_CLK_MT7986_H */
> +
> -- 
> 2.29.2
> 
> 

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH 05/12] dt-bindings: pinctrl: update bindings for MT7986 SoC
  2021-07-26  7:14 ` [PATCH 05/12] dt-bindings: pinctrl: update bindings for MT7986 SoC Sam Shih
@ 2021-07-29 22:51   ` Rob Herring
  0 siblings, 0 replies; 26+ messages in thread
From: Rob Herring @ 2021-07-29 22:51 UTC (permalink / raw)
  To: Sam Shih
  Cc: Sean Wang, Linus Walleij, Matthias Brugger, Matt Mackall,
	Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck, Guenter Roeck,
	Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk,
	John Crispin, Ryder Lee

On Mon, Jul 26, 2021 at 03:14:32PM +0800, Sam Shih wrote:
> This updates bindings for MT7986 pinctrl driver.
> The difference of pinctrl between mt7986a and mt7986b
> is that pin-41 to pin-65 do not exist on mt7986b

Sounds like you could use the same compatible string. Wouldn't the DT 
for mt7986b simply not have any config for those pins?

> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> ---
>  .../bindings/pinctrl/pinctrl-mt7622.txt       | 284 ++++++++++++++++++
>  1 file changed, 284 insertions(+)

This is a big change. Please convert to a schema. It probably should be 
a separate schema.

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH 07/12] dt-bindings: arm64: dts: mediatek: Add mt7986 series
  2021-07-26  7:14 ` [PATCH 07/12] dt-bindings: arm64: dts: mediatek: Add mt7986 series Sam Shih
@ 2021-07-29 22:51   ` Rob Herring
  0 siblings, 0 replies; 26+ messages in thread
From: Rob Herring @ 2021-07-29 22:51 UTC (permalink / raw)
  To: Sam Shih
  Cc: Seiya Wang, Greg Kroah-Hartman, Matthias Brugger,
	Michael Turquette, linux-arm-kernel, devicetree, Rob Herring,
	linux-watchdog, Ryder Lee, Hsin-Yi Wang, linux-clk, linux-crypto,
	Enric Balletbo i Serra, Sean Wang, linux-serial, Guenter Roeck,
	Stephen Boyd, Matt Mackall, John Crispin, Fabien Parent,
	linux-gpio, Linus Walleij, Herbert Xu, linux-kernel,
	linux-mediatek, Wim Van Sebroeck

On Mon, 26 Jul 2021 15:14:34 +0800, Sam Shih wrote:
> MT7986 is Mediatek's new 4-core SoC, which is mainly for wifi-router
> application. The difference between mt7986a and mt7986b is that some
> pins do not exist on mt7986b.
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> ---
>  Documentation/devicetree/bindings/arm/mediatek.yaml | 8 ++++++++
>  1 file changed, 8 insertions(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH 08/12] dt-bindings: rng: mediatek: add mt7986 to mtk rng binding
  2021-07-26  7:14 ` [PATCH 08/12] dt-bindings: rng: mediatek: add mt7986 to mtk rng binding Sam Shih
@ 2021-07-29 22:53   ` Rob Herring
  0 siblings, 0 replies; 26+ messages in thread
From: Rob Herring @ 2021-07-29 22:53 UTC (permalink / raw)
  To: Sam Shih
  Cc: Michael Turquette, Matt Mackall, linux-watchdog, Sean Wang,
	linux-kernel, Greg Kroah-Hartman, John Crispin, Hsin-Yi Wang,
	linux-mediatek, Rob Herring, linux-crypto, Matthias Brugger,
	Enric Balletbo i Serra, Guenter Roeck, Stephen Boyd,
	Fabien Parent, linux-gpio, Ryder Lee, Linus Walleij, devicetree,
	Wim Van Sebroeck, Herbert Xu, linux-clk, Seiya Wang,
	linux-arm-kernel, linux-serial

On Mon, 26 Jul 2021 15:14:35 +0800, Sam Shih wrote:
> Add RNG binding for MT7986 SoC.
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> ---
>  Documentation/devicetree/bindings/rng/mtk-rng.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 

Applied, thanks!

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH 10/12] dt-bindings: watchdog: Add compatible for Mediatek MT7986
  2021-07-26  7:14 ` [PATCH 10/12] dt-bindings: watchdog: " Sam Shih
@ 2021-07-29 22:53   ` Rob Herring
  2021-08-01 20:48   ` Guenter Roeck
  1 sibling, 0 replies; 26+ messages in thread
From: Rob Herring @ 2021-07-29 22:53 UTC (permalink / raw)
  To: Sam Shih
  Cc: Greg Kroah-Hartman, linux-arm-kernel, Hsin-Yi Wang, Stephen Boyd,
	linux-kernel, linux-serial, Enric Balletbo i Serra, Rob Herring,
	linux-clk, Sean Wang, linux-mediatek, linux-gpio, Matt Mackall,
	Guenter Roeck, linux-watchdog, John Crispin, Ryder Lee,
	Herbert Xu, linux-crypto, Wim Van Sebroeck, Michael Turquette,
	Fabien Parent, Linus Walleij, Seiya Wang, Matthias Brugger,
	devicetree

On Mon, 26 Jul 2021 15:14:37 +0800, Sam Shih wrote:
> This commit adds dt-binding documentation of watchdog for Mediatek MT7986
> SoC Platform.
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> ---
>  Documentation/devicetree/bindings/watchdog/mtk-wdt.txt | 1 +
>  1 file changed, 1 insertion(+)
> 

Acked-by: Rob Herring <robh@kernel.org>

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH 01/12] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
  2021-07-26  9:20   ` Chen-Yu Tsai
@ 2021-07-30  6:01     ` Sam Shih
  2021-07-30  6:30       ` Chen-Yu Tsai
  0 siblings, 1 reply; 26+ messages in thread
From: Sam Shih @ 2021-07-30  6:01 UTC (permalink / raw)
  To: Chen-Yu Tsai
  Cc: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang,
	Devicetree List, LKML, moderated list:ARM/Mediatek SoC support,
	linux-gpio,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	linux-crypto, linux-serial, linux-watchdog, linux-clk,
	John Crispin, Ryder Lee

Hi,

On Mon, 2021-07-26 at 17:20 +0800, Chen-Yu Tsai wrote:
> Furthermore, based on the driver patch and the fact that they share
> the
> same compatible string, it seems you shouldn't need to have two
> compatible
> strings for two identical hardware blocks. The need for separate
> entries
> to have different clock names is an implementation detail. Please
> consider
> using and supporting clock-output-names.
> 
> Also, please check out the MT8195 clock driver series [1]. I'm
> guessing
> a lot of the comments apply to this one as well.
> 
> Regards
> ChenYu
> 
> [1] 
> https://urldefense.com/v3/__https://lore.kernel.org/linux-mediatek/20210616224743.5109-1-chun-jie.chen@mediatek.com/T/*t__;Iw!!CTRNKA9wMg0ARbw!29pb4TJiGHLvLbYJgDB2Dhf8Mpw5VU8zV-W3NrMan_RPQrtWT2EdRTyyjWpu0nZE$
>  
> 

I have organized your comments in "Mediatek MT8195 clock support"
series into the following list, reply to your here:

> dt-binding: Move the not-to-be-exposed clock to driver directory or
> simply left out
Okay, thanks for your comment, I will update this in the next patch set

> describe some of the clock relations between the various clock
> controllers
I have checked the files in
"Documentation/devicetree/bindings/arm/mediatek", It seems that all
MediaTek SoC clocks are simply described by each controller, like
"mediatek,infracfg.txt" and "mediatek,topckgen.txt", and those document
only include compatible strings information and examples.
Can we insert the clock relationship of MT7986 directlly in common
documents?
Or we should add a new "mediatek,mt7986-clock.yaml" and move compatible
strings information and example to this file, and insert clock
relationship descriptions to this file? Wouldn’t it be strange to skip
existing files and create a new one?

> external oscillator's case, the oscillator is described in the device
> tree
Yes, we have "clkxtal" in the DT, which stands for external oscillator,
All clocks in apmixedsys use "clkxtal" as the parent clock

> Dual license please (and the dts files).
Okay, thanks for your comment, I will update this in the next patch set

> Why are this and other 1:1 factor clks needed? They look like
> placeholders. Please remove them.
Okay, thanks for your comment, I will update this in the next patch set

> Merge duplicate parent instances
We have considered this in the MT7986 basic clock driver, but I will
check again. If corrections are needed, I will make changes in the next
patch set.

> Leaking clk_data if some function return fail
Okay, thanks for your comment, I will update this in the next patch set

> This file contains four drivers. They do not have depend on each
> other, and do not need to be in the same file. Please split them into
> differen files and preferably different patches
Okay, thanks for your comment, I will separate those clock drivers in
the next patch set

> Is there any particular reason for arch_initcall
We have considered this in MT7986 basic clock driver, and use
CLK_OF_DECLARE instead of arch_initcall.

Another question:
Should the clock patches in "Add basic SoC support for MediaTek mt7986"
need to be separated into another patch series, such as MT8195
"Mediatek MT8195 clock support" ? 


Regards
Sam

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH 01/12] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
  2021-07-30  6:01     ` Sam Shih
@ 2021-07-30  6:30       ` Chen-Yu Tsai
  2021-08-13  5:22         ` Sam Shih
  0 siblings, 1 reply; 26+ messages in thread
From: Chen-Yu Tsai @ 2021-07-30  6:30 UTC (permalink / raw)
  To: Sam Shih
  Cc: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang,
	Devicetree List, LKML, moderated list:ARM/Mediatek SoC support,
	linux-gpio,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	linux-crypto, linux-serial, linux-watchdog, linux-clk,
	John Crispin, Ryder Lee

On Fri, Jul 30, 2021 at 2:01 PM Sam Shih <sam.shih@mediatek.com> wrote:
>
> Hi,
>
> On Mon, 2021-07-26 at 17:20 +0800, Chen-Yu Tsai wrote:
> > Furthermore, based on the driver patch and the fact that they share
> > the
> > same compatible string, it seems you shouldn't need to have two
> > compatible
> > strings for two identical hardware blocks. The need for separate
> > entries
> > to have different clock names is an implementation detail. Please
> > consider
> > using and supporting clock-output-names.
> >
> > Also, please check out the MT8195 clock driver series [1]. I'm
> > guessing
> > a lot of the comments apply to this one as well.
> >
> > Regards
> > ChenYu
> >
> > [1]
> > https://urldefense.com/v3/__https://lore.kernel.org/linux-mediatek/20210616224743.5109-1-chun-jie.chen@mediatek.com/T/*t__;Iw!!CTRNKA9wMg0ARbw!29pb4TJiGHLvLbYJgDB2Dhf8Mpw5VU8zV-W3NrMan_RPQrtWT2EdRTyyjWpu0nZE$
> >
> >
>
> I have organized your comments in "Mediatek MT8195 clock support"
> series into the following list, reply to your here:
>
> > dt-binding: Move the not-to-be-exposed clock to driver directory or
> > simply left out
> Okay, thanks for your comment, I will update this in the next patch set

See the following file for an example:

    https://elixir.bootlin.com/linux/latest/source/drivers/clk/sunxi-ng/ccu-sun50i-a64.h

I think this is definitely optional, but it makes it safer in that other
drivers would not be able to use the non-exported intermediate clocks.

> > describe some of the clock relations between the various clock
> > controllers
> I have checked the files in
> "Documentation/devicetree/bindings/arm/mediatek", It seems that all
> MediaTek SoC clocks are simply described by each controller, like
> "mediatek,infracfg.txt" and "mediatek,topckgen.txt", and those document
> only include compatible strings information and examples.
> Can we insert the clock relationship of MT7986 directlly in common
> documents?

What I meant was that since each clock controller hardware block has
one or many clock inputs, these should be described in the binding
as required "clocks" and "clock-names" properties.

So it's not about describing the actual relationship or clock tree,
but just having the inputs accurately described.

> Or we should add a new "mediatek,mt7986-clock.yaml" and move compatible
> strings information and example to this file, and insert clock
> relationship descriptions to this file? Wouldn’t it be strange to skip
> existing files and create a new one?

I think that is a question for the device tree binding maintainer, Rob.
At least for Mediatek stuff, there seem to be many separate files.

> > external oscillator's case, the oscillator is described in the device
> > tree
> Yes, we have "clkxtal" in the DT, which stands for external oscillator,
> All clocks in apmixedsys use "clkxtal" as the parent clock

So for the apmixedsys device node, it would at least have something like:

    clocks = <&clkxtal>;
    clock-names = "xtal";

For topckgen, since it has xtal and some PLLs from apmixedsys as inputs:

    clocks = <&clkxtal>, <&apmixedsys CLK_ID_PLLXXX>, <&apmixedsys
CLK_ID_PLLYYY>;
    clock-names = "xtal", "pllXXX", "pllYYY"

The above is just an example. You should adapt it to fit your hardware
description. And the bindings should describe what is required. Note
that the clock names used here are local to this device node. They do
not need to match what the clock driver uses for the global name. So
just go with something descriptive.

The point is, cross hardware block dependencies should be clearly described
in the device tree, instead of implicitly buried in the clock drivers.

> > Dual license please (and the dts files).
> Okay, thanks for your comment, I will update this in the next patch set
>
> > Why are this and other 1:1 factor clks needed? They look like
> > placeholders. Please remove them.
> Okay, thanks for your comment, I will update this in the next patch set

Ideally the clock driver would use the device tree to get local references
for this, but that is going to require some rework to Mediatek's common
clock code.

> > Merge duplicate parent instances
> We have considered this in the MT7986 basic clock driver, but I will
> check again. If corrections are needed, I will make changes in the next
> patch set.
>
> > Leaking clk_data if some function return fail
> Okay, thanks for your comment, I will update this in the next patch set
>
> > This file contains four drivers. They do not have depend on each
> > other, and do not need to be in the same file. Please split them into
> > differen files and preferably different patches
> Okay, thanks for your comment, I will separate those clock drivers in
> the next patch set
>
> > Is there any particular reason for arch_initcall
> We have considered this in MT7986 basic clock driver, and use
> CLK_OF_DECLARE instead of arch_initcall.

Having to sequence clock registration manually is likely a symptom of
inadequate clock dependency handling. So if the drivers are only using
global clock names to describe parents, what happens is that even if
the parent isn't in the system yet, the registration is allowed to
succeed. However since the parent clock isn't available yet, any
calculations involving it, such as calculating clock rates, will
yield invalid results, such as 0 clock rate.

> Another question:
> Should the clock patches in "Add basic SoC support for MediaTek mt7986"
> need to be separated into another patch series, such as MT8195
> "Mediatek MT8195 clock support" ?

Nope. The MT8195 team seems to be splitting things up by module, with
the device tree being its own separate module. Ideally you want to send
drivers along with the related device tree changes, so people reviewing
can get a sense of how things work. And if the hardware is publicly
available, people can actually test the changes. We can't do that if the
device tree changes aren't bundled together.


Regards
ChenYu

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH 10/12] dt-bindings: watchdog: Add compatible for Mediatek MT7986
  2021-07-26  7:14 ` [PATCH 10/12] dt-bindings: watchdog: " Sam Shih
  2021-07-29 22:53   ` Rob Herring
@ 2021-08-01 20:48   ` Guenter Roeck
  1 sibling, 0 replies; 26+ messages in thread
From: Guenter Roeck @ 2021-08-01 20:48 UTC (permalink / raw)
  To: Sam Shih
  Cc: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang, devicetree,
	linux-kernel, linux-mediatek, linux-gpio, linux-arm-kernel,
	linux-crypto, linux-serial, linux-watchdog, linux-clk,
	John Crispin, Ryder Lee

On Mon, Jul 26, 2021 at 03:14:37PM +0800, Sam Shih wrote:
> This commit adds dt-binding documentation of watchdog for Mediatek MT7986
> SoC Platform.
> 
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> Acked-by: Rob Herring <robh@kernel.org>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  Documentation/devicetree/bindings/watchdog/mtk-wdt.txt | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> index 416d716403f6..a4e31ce96e0e 100644
> --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> @@ -13,6 +13,7 @@ Required properties:
>  	"mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
>  	"mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623
>  	"mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629
> +	"mediatek,mt7986-wdt", "mediatek,mt6589-wdt": for MT7986
>  	"mediatek,mt8183-wdt": for MT8183
>  	"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
>  	"mediatek,mt8192-wdt": for MT8192

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH 01/12] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
  2021-07-30  6:30       ` Chen-Yu Tsai
@ 2021-08-13  5:22         ` Sam Shih
  2021-08-13  6:15           ` Chen-Yu Tsai
  0 siblings, 1 reply; 26+ messages in thread
From: Sam Shih @ 2021-08-13  5:22 UTC (permalink / raw)
  To: Chen-Yu Tsai
  Cc: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang,
	Devicetree List, LKML, moderated list:ARM/Mediatek SoC support,
	linux-gpio,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	linux-crypto, linux-serial, linux-watchdog, linux-clk,
	John Crispin, Ryder Lee

Hi,

Sorry for the late reply,I have prepared v2 patches, but for some of your suggestions, I think
it is a bit difficult to apply to our drivers.


On Fri, 2021-07-30 at 14:30 +0800, Chen-Yu Tsai wrote:
> On Fri, Jul 30, 2021 at 2:01 PM Sam Shih <sam.shih@mediatek.com>
> wrote:
> > 
> > Hi,
> > 
> > On Mon, 2021-07-26 at 17:20 +0800, Chen-Yu Tsai wrote:
> > > Furthermore, based on the driver patch and the fact that they
> > > share
> > > the
> > > same compatible string, it seems you shouldn't need to have two
> > > compatible
> > > strings for two identical hardware blocks. The need for separate
> > > entries
> > > to have different clock names is an implementation detail. Please
> > > consider
> > > using and supporting clock-output-names.
> > > 
> > > Also, please check out the MT8195 clock driver series [1]. I'm
> > > guessing
> > > a lot of the comments apply to this one as well.
> > > 
> > > Regards
> > > ChenYu
> > > 
> > > [1]
> > > 
https://urldefense.com/v3/__https://lore.kernel.org/linux-mediatek/20210616224743.5109-1-chun-jie.chen@mediatek.com/T/*t__;Iw!!CTRNKA9wMg0ARbw!29pb4TJiGHLvLbYJgDB2Dhf8Mpw5VU8zV-W3NrMan_RPQrtWT2EdRTyyjWpu0nZE$
> > > 
> > > 
> > 
> > I have organized your comments in "Mediatek MT8195 clock support"
> > series into the following list, reply to your here:
> > 
> > > dt-binding: Move the not-to-be-exposed clock to driver directory
> > > or
> > > simply left out
> > 
> > Okay, thanks for your comment, I will update this in the next patch
> > set
> 
> See the following file for an example:
> 
> 

> https://urldefense.com/v3/__https://elixir.bootlin.com/linux/latest/source/drivers/clk/sunxi-ng/ccu-sun50i-a64.h__;!!CTRNKA9wMg0ARbw!3--UEpFFGeZ_WTCaWsj_9vbbb4SSE1vPCILFleThzpa1nq7mveFfQMDqbacdT5I6$ 
> 
> drivers would not be able to use the non-exported intermediate
> clocks.
> 
Thanks, I well delete some clocks that are not expected to be use in
device tree.

> > > describe some of the clock relations between the various clock
> > > controllers
> > 
> > I have checked the files in
> > "Documentation/devicetree/bindings/arm/mediatek", It seems that all
> > MediaTek SoC clocks are simply described by each controller, like
> > "mediatek,infracfg.txt" and "mediatek,topckgen.txt", and those
> > document
> > only include compatible strings information and examples.
> > Can we insert the clock relationship of MT7986 directlly in common
> > documents?
> 
> What I meant was that since each clock controller hardware block has
> one or many clock inputs, these should be described in the binding
> as required "clocks" and "clock-names" properties.
> 
> So it's not about describing the actual relationship or clock tree,
> but just having the inputs accurately described.
> 
> > Or we should add a new "mediatek,mt7986-clock.yaml" and move
> > compatible
> > strings information and example to this file, and insert clock
> > relationship descriptions to this file? Wouldn’t it be strange to
> > skip
> > existing files and create a new one?
> 
> I think that is a question for the device tree binding maintainer,
> Rob.
> At least for Mediatek stuff, there seem to be many separate files.
> 
> > > external oscillator's case, the oscillator is described in the
> > > device
> > > tree
> > 
> > Yes, we have "clkxtal" in the DT, which stands for external
> > oscillator,
> > All clocks in apmixedsys use "clkxtal" as the parent clock
> 
> So for the apmixedsys device node, it would at least have something
> like:
> 
>     clocks = <&clkxtal>;
>     clock-names = "xtal";
> 
> For topckgen, since it has xtal and some PLLs from apmixedsys as
> inputs:
> 
>     clocks = <&clkxtal>, <&apmixedsys CLK_ID_PLLXXX>, <&apmixedsys
> CLK_ID_PLLYYY>;
>     clock-names = "xtal", "pllXXX", "pllYYY"
> 
> The above is just an example. You should adapt it to fit your
> hardware
> description. And the bindings should describe what is required. Note
> that the clock names used here are local to this device node. They do
> not need to match what the clock driver uses for the global name. So
> just go with something descriptive.
> 
> The point is, cross hardware block dependencies should be clearly
> described
> in the device tree, instead of implicitly buried in the clock
> drivers.
> 

Make cross hardware block dependencies clearly described in the device
tree seems unsuitable between "topck" and "infra" block of mt7986.

In your example, passing "clkxtal" from the device tree seems ok. Even
for topckgen, passing "clkxtal", "pllXXX", "pllYYY" from the device
tree and using these clocks as the parent clock of topckgen also seems
to work. It is feasible because it is not much clock between these two
hardware blocks.

But for the clock releationship between "topckg" and "infra", they are
very complicated in hardware design. There are dozens of clocks and
interact with each other. If we want to describe these relationships in
the device tree, we need to use a big array inside the device tree and
make device tree looks very messy. Therefore, our previous method of
writing a clock driver is to use the global clock and descripbe the
clock releationship inside the clock driver.

               ______   ________    ________
    clkxtal --|      |  |       |.x.|       |
              |apmix.|--| topck |.x.| infra |
              |      |--|       |.x.|_______|
              |      |  |       |   ________
              |______|  |       |--|        |
                        |       |--| ethsys |
                        |_______|  |________|

Maybe we should keep the clock relationship in our clock driver like
the previous mediatek clock drivers.


> > > Dual license please (and the dts files).
> > 
> > Okay, thanks for your comment, I will update this in the next patch
> > set
> > 
> > > Why are this and other 1:1 factor clks needed? They look like
> > > placeholders. Please remove them.
> > 
> > Okay, thanks for your comment, I will update this in the next patch
> > set
> 
> Ideally the clock driver would use the device tree to get local
> references
> for this, but that is going to require some rework to Mediatek's
> common
> clock code.
> 

To transfer the clock relationship through the device tree, it is
necessary to make modifications to the common part of the mtk clock
driver that has been merged, and may also modify other mediatek clock
drivers.

Let's move to the source code:
	
apmixedsys {
    ...
}
	
topckgen {
    ...
    clocks = ... , <&apmixedsys NET2PLL> , ... ;
    clock-names = ... , "net2pll" , ... ;
}

char *parent_name;
    for each clk in <device_tree_node>:
        parent_name = __clk_get_name(of_clk_get(np, i))
	
(armada-37xx-tbg.c use this method to get global name of parent clock)

Ideally, we should use the parent_name variable above to create a
clock, But mtk_fixed_factor expects input const strings
	
void mtk_clk_register_factors(const struct mtk_fixed_factor *clks, ...)
	
struct mtk_fixed_factor {
    ...
    const char *name;
    const char *parent;
    ...
};

So we still need to use pre-defined clock name in static const clock
table even we can get clock name as variable from device tree.


static const struct mtk_fixed_factor top_divs[] __initconst = {
    ...
    FACTOR(CK_TOP_NET2_D4_D2, "net2_d4_d2", "net2pll", 1, 8),
    FACTOR(CK_TOP_NET2_D3_D2, "net2_d3_d2", "net2pll", 1, 2),
    ...
}



> > > Merge duplicate parent instances
> > 
> > We have considered this in the MT7986 basic clock driver, but I
> > will
> > check again. If corrections are needed, I will make changes in the
> > next
> > patch set.
> > 
> > > Leaking clk_data if some function return fail
> > 
> > Okay, thanks for your comment, I will update this in the next patch
> > set
> > 
> > > This file contains four drivers. They do not have depend on each
> > > other, and do not need to be in the same file. Please split them
> > > into
> > > differen files and preferably different patches
> > 
> > Okay, thanks for your comment, I will separate those clock drivers
> > in
> > the next patch set
> > 
> > > Is there any particular reason for arch_initcall
> > 
> > We have considered this in MT7986 basic clock driver, and use
> > CLK_OF_DECLARE instead of arch_initcall.
> 
> Having to sequence clock registration manually is likely a symptom of
> inadequate clock dependency handling. So if the drivers are only
> using
> global clock names to describe parents, what happens is that even if
> the parent isn't in the system yet, the registration is allowed to
> succeed. However since the parent clock isn't available yet, any
> calculations involving it, such as calculating clock rates, will
> yield invalid results, such as 0 clock rate.
> 
> > Another question:
> > Should the clock patches in "Add basic SoC support for MediaTek
> > mt7986"
> > need to be separated into another patch series, such as MT8195
> > "Mediatek MT8195 clock support" ?
> 
> Nope. The MT8195 team seems to be splitting things up by module, with
> the device tree being its own separate module. Ideally you want to
> send
> drivers along with the related device tree changes, so people
> reviewing
> can get a sense of how things work. And if the hardware is publicly
> available, people can actually test the changes. We can't do that if
> the
> device tree changes aren't bundled together.
> 
OK, I will keep clock patches and basic part patches in the same series
(patches v2)


Regards,
Sam
Thanks, I will delete some clocks that are not expected to b

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH 01/12] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
  2021-08-13  5:22         ` Sam Shih
@ 2021-08-13  6:15           ` Chen-Yu Tsai
  2021-08-13  6:40             ` Sam Shih
  0 siblings, 1 reply; 26+ messages in thread
From: Chen-Yu Tsai @ 2021-08-13  6:15 UTC (permalink / raw)
  To: Sam Shih
  Cc: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang,
	Devicetree List, LKML, moderated list:ARM/Mediatek SoC support,
	linux-gpio,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	linux-crypto, linux-serial, linux-watchdog, linux-clk,
	John Crispin, Ryder Lee

On Fri, Aug 13, 2021 at 1:22 PM Sam Shih <sam.shih@mediatek.com> wrote:
>
> Hi,
>
> Sorry for the late reply,I have prepared v2 patches, but for some of your suggestions, I think
> it is a bit difficult to apply to our drivers.
>
>
> On Fri, 2021-07-30 at 14:30 +0800, Chen-Yu Tsai wrote:
> > On Fri, Jul 30, 2021 at 2:01 PM Sam Shih <sam.shih@mediatek.com>
> > wrote:
> > >
> > > Hi,
> > >
> > > On Mon, 2021-07-26 at 17:20 +0800, Chen-Yu Tsai wrote:
> > > > Furthermore, based on the driver patch and the fact that they
> > > > share
> > > > the
> > > > same compatible string, it seems you shouldn't need to have two
> > > > compatible
> > > > strings for two identical hardware blocks. The need for separate
> > > > entries
> > > > to have different clock names is an implementation detail. Please
> > > > consider
> > > > using and supporting clock-output-names.
> > > >
> > > > Also, please check out the MT8195 clock driver series [1]. I'm
> > > > guessing
> > > > a lot of the comments apply to this one as well.
> > > >
> > > > Regards
> > > > ChenYu
> > > >
> > > > [1]
> > > >
> https://urldefense.com/v3/__https://lore.kernel.org/linux-mediatek/20210616224743.5109-1-chun-jie.chen@mediatek.com/T/*t__;Iw!!CTRNKA9wMg0ARbw!29pb4TJiGHLvLbYJgDB2Dhf8Mpw5VU8zV-W3NrMan_RPQrtWT2EdRTyyjWpu0nZE$
> > > >
> > > >
> > >
> > > I have organized your comments in "Mediatek MT8195 clock support"
> > > series into the following list, reply to your here:
> > >
> > > > dt-binding: Move the not-to-be-exposed clock to driver directory
> > > > or
> > > > simply left out
> > >
> > > Okay, thanks for your comment, I will update this in the next patch
> > > set
> >
> > See the following file for an example:
> >
> >
>
> > https://urldefense.com/v3/__https://elixir.bootlin.com/linux/latest/source/drivers/clk/sunxi-ng/ccu-sun50i-a64.h__;!!CTRNKA9wMg0ARbw!3--UEpFFGeZ_WTCaWsj_9vbbb4SSE1vPCILFleThzpa1nq7mveFfQMDqbacdT5I6$
> >
> > drivers would not be able to use the non-exported intermediate
> > clocks.
> >
> Thanks, I well delete some clocks that are not expected to be use in
> device tree.
>
> > > > describe some of the clock relations between the various clock
> > > > controllers
> > >
> > > I have checked the files in
> > > "Documentation/devicetree/bindings/arm/mediatek", It seems that all
> > > MediaTek SoC clocks are simply described by each controller, like
> > > "mediatek,infracfg.txt" and "mediatek,topckgen.txt", and those
> > > document
> > > only include compatible strings information and examples.
> > > Can we insert the clock relationship of MT7986 directlly in common
> > > documents?
> >
> > What I meant was that since each clock controller hardware block has
> > one or many clock inputs, these should be described in the binding
> > as required "clocks" and "clock-names" properties.
> >
> > So it's not about describing the actual relationship or clock tree,
> > but just having the inputs accurately described.
> >
> > > Or we should add a new "mediatek,mt7986-clock.yaml" and move
> > > compatible
> > > strings information and example to this file, and insert clock
> > > relationship descriptions to this file? Wouldn’t it be strange to
> > > skip
> > > existing files and create a new one?
> >
> > I think that is a question for the device tree binding maintainer,
> > Rob.
> > At least for Mediatek stuff, there seem to be many separate files.
> >
> > > > external oscillator's case, the oscillator is described in the
> > > > device
> > > > tree
> > >
> > > Yes, we have "clkxtal" in the DT, which stands for external
> > > oscillator,
> > > All clocks in apmixedsys use "clkxtal" as the parent clock
> >
> > So for the apmixedsys device node, it would at least have something
> > like:
> >
> >     clocks = <&clkxtal>;
> >     clock-names = "xtal";
> >
> > For topckgen, since it has xtal and some PLLs from apmixedsys as
> > inputs:
> >
> >     clocks = <&clkxtal>, <&apmixedsys CLK_ID_PLLXXX>, <&apmixedsys
> > CLK_ID_PLLYYY>;
> >     clock-names = "xtal", "pllXXX", "pllYYY"
> >
> > The above is just an example. You should adapt it to fit your
> > hardware
> > description. And the bindings should describe what is required. Note
> > that the clock names used here are local to this device node. They do
> > not need to match what the clock driver uses for the global name. So
> > just go with something descriptive.
> >
> > The point is, cross hardware block dependencies should be clearly
> > described
> > in the device tree, instead of implicitly buried in the clock
> > drivers.
> >
>
> Make cross hardware block dependencies clearly described in the device
> tree seems unsuitable between "topck" and "infra" block of mt7986.
>
> In your example, passing "clkxtal" from the device tree seems ok. Even
> for topckgen, passing "clkxtal", "pllXXX", "pllYYY" from the device
> tree and using these clocks as the parent clock of topckgen also seems
> to work. It is feasible because it is not much clock between these two
> hardware blocks.
>
> But for the clock releationship between "topckg" and "infra", they are
> very complicated in hardware design. There are dozens of clocks and
> interact with each other. If we want to describe these relationships in
> the device tree, we need to use a big array inside the device tree and
> make device tree looks very messy. Therefore, our previous method of
> writing a clock driver is to use the global clock and descripbe the
> clock releationship inside the clock driver.
>
>                ______   ________    ________
>     clkxtal --|      |  |       |.x.|       |
>               |apmix.|--| topck |.x.| infra |
>               |      |--|       |.x.|_______|
>               |      |  |       |   ________
>               |______|  |       |--|        |
>                         |       |--| ethsys |
>                         |_______|  |________|
>
> Maybe we should keep the clock relationship in our clock driver like
> the previous mediatek clock drivers.

Are you saying that some clocks in topck have inputs from infra?
If so, then that's a nasty circular dependency to deal with.

And to be fair, many Mediatek device tree bindings already take a large
number of clocks, so I think adding a few more isn't too bad.

> > > > Dual license please (and the dts files).
> > >
> > > Okay, thanks for your comment, I will update this in the next patch
> > > set
> > >
> > > > Why are this and other 1:1 factor clks needed? They look like
> > > > placeholders. Please remove them.
> > >
> > > Okay, thanks for your comment, I will update this in the next patch
> > > set
> >
> > Ideally the clock driver would use the device tree to get local
> > references
> > for this, but that is going to require some rework to Mediatek's
> > common
> > clock code.
> >
>
> To transfer the clock relationship through the device tree, it is
> necessary to make modifications to the common part of the mtk clock
> driver that has been merged, and may also modify other mediatek clock
> drivers.
>
> Let's move to the source code:
>
> apmixedsys {
>     ...
> }
>
> topckgen {
>     ...
>     clocks = ... , <&apmixedsys NET2PLL> , ... ;
>     clock-names = ... , "net2pll" , ... ;
> }
>
> char *parent_name;
>     for each clk in <device_tree_node>:
>         parent_name = __clk_get_name(of_clk_get(np, i))
>
> (armada-37xx-tbg.c use this method to get global name of parent clock)
>
> Ideally, we should use the parent_name variable above to create a
> clock, But mtk_fixed_factor expects input const strings
>
> void mtk_clk_register_factors(const struct mtk_fixed_factor *clks, ...)
>
> struct mtk_fixed_factor {
>     ...
>     const char *name;
>     const char *parent;
>     ...
> };
>
> So we still need to use pre-defined clock name in static const clock
> table even we can get clock name as variable from device tree.
>
>
> static const struct mtk_fixed_factor top_divs[] __initconst = {
>     ...
>     FACTOR(CK_TOP_NET2_D4_D2, "net2_d4_d2", "net2pll", 1, 8),
>     FACTOR(CK_TOP_NET2_D3_D2, "net2_d3_d2", "net2pll", 1, 2),
>     ...
> }

Right. I'm not asking you to do this right away. This will end up being
a long migration over multiple releases. But it makes sense to get the
device tree bindings sorted out first.

I believe the solution is to move to `struct clk_parent_data` to replace
the pure strings. New internal APIs for the Mediatek clock driver would
need to be added, and all the drivers slowly migrated over. Probably also
a good time to migrate to clk_hw_*_register.


ChenYu




> > > > Merge duplicate parent instances
> > >
> > > We have considered this in the MT7986 basic clock driver, but I
> > > will
> > > check again. If corrections are needed, I will make changes in the
> > > next
> > > patch set.
> > >
> > > > Leaking clk_data if some function return fail
> > >
> > > Okay, thanks for your comment, I will update this in the next patch
> > > set
> > >
> > > > This file contains four drivers. They do not have depend on each
> > > > other, and do not need to be in the same file. Please split them
> > > > into
> > > > differen files and preferably different patches
> > >
> > > Okay, thanks for your comment, I will separate those clock drivers
> > > in
> > > the next patch set
> > >
> > > > Is there any particular reason for arch_initcall
> > >
> > > We have considered this in MT7986 basic clock driver, and use
> > > CLK_OF_DECLARE instead of arch_initcall.
> >
> > Having to sequence clock registration manually is likely a symptom of
> > inadequate clock dependency handling. So if the drivers are only
> > using
> > global clock names to describe parents, what happens is that even if
> > the parent isn't in the system yet, the registration is allowed to
> > succeed. However since the parent clock isn't available yet, any
> > calculations involving it, such as calculating clock rates, will
> > yield invalid results, such as 0 clock rate.
> >
> > > Another question:
> > > Should the clock patches in "Add basic SoC support for MediaTek
> > > mt7986"
> > > need to be separated into another patch series, such as MT8195
> > > "Mediatek MT8195 clock support" ?
> >
> > Nope. The MT8195 team seems to be splitting things up by module, with
> > the device tree being its own separate module. Ideally you want to
> > send
> > drivers along with the related device tree changes, so people
> > reviewing
> > can get a sense of how things work. And if the hardware is publicly
> > available, people can actually test the changes. We can't do that if
> > the
> > device tree changes aren't bundled together.
> >
> OK, I will keep clock patches and basic part patches in the same series
> (patches v2)
>
>
> Regards,
> Sam
> Thanks, I will delete some clocks that are not expected to b

^ permalink raw reply	[flat|nested] 26+ messages in thread

* Re: [PATCH 01/12] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC
  2021-08-13  6:15           ` Chen-Yu Tsai
@ 2021-08-13  6:40             ` Sam Shih
  0 siblings, 0 replies; 26+ messages in thread
From: Sam Shih @ 2021-08-13  6:40 UTC (permalink / raw)
  To: Chen-Yu Tsai
  Cc: Rob Herring, Sean Wang, Linus Walleij, Matthias Brugger,
	Matt Mackall, Herbert Xu, Greg Kroah-Hartman, Wim Van Sebroeck,
	Guenter Roeck, Michael Turquette, Stephen Boyd, Hsin-Yi Wang,
	Enric Balletbo i Serra, Fabien Parent, Seiya Wang,
	Devicetree List, LKML, moderated list:ARM/Mediatek SoC support,
	linux-gpio,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	linux-crypto, linux-serial, linux-watchdog, linux-clk,
	John Crispin, Ryder Lee

On Fri, 2021-08-13 at 14:15 +0800, Chen-Yu Tsai wrote:
> On Fri, Aug 13, 2021 at 1:22 PM Sam Shih <sam.shih@mediatek.com>
> wrote:
> > 
> > Hi,
> > 
> > Sorry for the late reply,I have prepared v2 patches, but for some
> > of your suggestions, I think
> > it is a bit difficult to apply to our drivers.
> > 
> > 
> > On Fri, 2021-07-30 at 14:30 +0800, Chen-Yu Tsai wrote:
> > > On Fri, Jul 30, 2021 at 2:01 PM Sam Shih <sam.shih@mediatek.com>
> > > wrote:
> > > > 
> > > > Hi,
> > > > 
> > > > On Mon, 2021-07-26 at 17:20 +0800, Chen-Yu Tsai wrote:
> > > > > Furthermore, based on the driver patch and the fact that they
> > > > > share
> > > > > the
> > > > > same compatible string, it seems you shouldn't need to have
> > > > > two
> > > > > compatible
> > > > > strings for two identical hardware blocks. The need for
> > > > > separate
> > > > > entries
> > > > > to have different clock names is an implementation detail.
> > > > > Please
> > > > > consider
> > > > > using and supporting clock-output-names.
> > > > > 
> > > > > Also, please check out the MT8195 clock driver series [1].
> > > > > I'm
> > > > > guessing
> > > > > a lot of the comments apply to this one as well.
> > > > > 
> > > > > Regards
> > > > > ChenYu
> > > > > 
> > > > > [1]
> > > > > 
> > 
> > 
https://urldefense.com/v3/__https://lore.kernel.org/linux-mediatek/20210616224743.5109-1-chun-jie.chen@mediatek.com/T/*t__;Iw!!CTRNKA9wMg0ARbw!29pb4TJiGHLvLbYJgDB2Dhf8Mpw5VU8zV-W3NrMan_RPQrtWT2EdRTyyjWpu0nZE$
> > > > > 
> > > > > 
> > > > 
> > > > I have organized your comments in "Mediatek MT8195 clock
> > > > support"
> > > > series into the following list, reply to your here:
> > > > 
> > > > > dt-binding: Move the not-to-be-exposed clock to driver
> > > > > directory
> > > > > or
> > > > > simply left out
> > > > 
> > > > Okay, thanks for your comment, I will update this in the next
> > > > patch
> > > > set
> > > 
> > > See the following file for an example:
> > > 
> > > 
> > > 
https://urldefense.com/v3/__https://elixir.bootlin.com/linux/latest/source/drivers/clk/sunxi-ng/ccu-sun50i-a64.h__;!!CTRNKA9wMg0ARbw!3--UEpFFGeZ_WTCaWsj_9vbbb4SSE1vPCILFleThzpa1nq7mveFfQMDqbacdT5I6$
> > > 
> > > drivers would not be able to use the non-exported intermediate
> > > clocks.
> > > 
> > 
> > Thanks, I well delete some clocks that are not expected to be use
> > in
> > device tree.
> > 
> > > > > describe some of the clock relations between the various
> > > > > clock
> > > > > controllers
> > > > 
> > > > I have checked the files in
> > > > "Documentation/devicetree/bindings/arm/mediatek", It seems that
> > > > all
> > > > MediaTek SoC clocks are simply described by each controller,
> > > > like
> > > > "mediatek,infracfg.txt" and "mediatek,topckgen.txt", and those
> > > > document
> > > > only include compatible strings information and examples.
> > > > Can we insert the clock relationship of MT7986 directlly in
> > > > common
> > > > documents?
> > > 
> > > What I meant was that since each clock controller hardware block
> > > has
> > > one or many clock inputs, these should be described in the
> > > binding
> > > as required "clocks" and "clock-names" properties.
> > > 
> > > So it's not about describing the actual relationship or clock
> > > tree,
> > > but just having the inputs accurately described.
> > > 
> > > > Or we should add a new "mediatek,mt7986-clock.yaml" and move
> > > > compatible
> > > > strings information and example to this file, and insert clock
> > > > relationship descriptions to this file? Wouldn’t it be strange
> > > > to
> > > > skip
> > > > existing files and create a new one?
> > > 
> > > I think that is a question for the device tree binding
> > > maintainer,
> > > Rob.
> > > At least for Mediatek stuff, there seem to be many separate
> > > files.
> > > 
> > > > > external oscillator's case, the oscillator is described in
> > > > > the
> > > > > device
> > > > > tree
> > > > 
> > > > Yes, we have "clkxtal" in the DT, which stands for external
> > > > oscillator,
> > > > All clocks in apmixedsys use "clkxtal" as the parent clock
> > > 
> > > So for the apmixedsys device node, it would at least have
> > > something
> > > like:
> > > 
> > >     clocks = <&clkxtal>;
> > >     clock-names = "xtal";
> > > 
> > > For topckgen, since it has xtal and some PLLs from apmixedsys as
> > > inputs:
> > > 
> > >     clocks = <&clkxtal>, <&apmixedsys CLK_ID_PLLXXX>,
> > > <&apmixedsys
> > > CLK_ID_PLLYYY>;
> > >     clock-names = "xtal", "pllXXX", "pllYYY"
> > > 
> > > The above is just an example. You should adapt it to fit your
> > > hardware
> > > description. And the bindings should describe what is required.
> > > Note
> > > that the clock names used here are local to this device node.
> > > They do
> > > not need to match what the clock driver uses for the global name.
> > > So
> > > just go with something descriptive.
> > > 
> > > The point is, cross hardware block dependencies should be clearly
> > > described
> > > in the device tree, instead of implicitly buried in the clock
> > > drivers.
> > > 
> > 
> > Make cross hardware block dependencies clearly described in the
> > device
> > tree seems unsuitable between "topck" and "infra" block of mt7986.
> > 
> > In your example, passing "clkxtal" from the device tree seems ok.
> > Even
> > for topckgen, passing "clkxtal", "pllXXX", "pllYYY" from the device
> > tree and using these clocks as the parent clock of topckgen also
> > seems
> > to work. It is feasible because it is not much clock between these
> > two
> > hardware blocks.
> > 
> > But for the clock releationship between "topckg" and "infra", they
> > are
> > very complicated in hardware design. There are dozens of clocks and
> > interact with each other. If we want to describe these
> > relationships in
> > the device tree, we need to use a big array inside the device tree
> > and
> > make device tree looks very messy. Therefore, our previous method
> > of
> > writing a clock driver is to use the global clock and descripbe the
> > clock releationship inside the clock driver.
> > 
> >                ______   ________    ________
> >     clkxtal --|      |  |       |.x.|       |
> >               |apmix.|--| topck |.x.| infra |
> >               |      |--|       |.x.|_______|
> >               |      |  |       |   ________
> >               |______|  |       |--|        |
> >                         |       |--| ethsys |
> >                         |_______|  |________|
> > 
> > Maybe we should keep the clock relationship in our clock driver
> > like
> > the previous mediatek clock drivers.
> 
> Are you saying that some clocks in topck have inputs from infra?
> If so, then that's a nasty circular dependency to deal with.
> 
Sorry I didn't express it very clearly, I mean that there are many
clock connections between "ckgen" and "infra" (unlike apmixedsys and
ckgen). Although most of the clocks in "infra" is derived from "ckgen".
But if we want to use the device tree, we will need to pass dozens of
clocks.

> And to be fair, many Mediatek device tree bindings already take a
> large
> number of clocks, so I think adding a few more isn't too bad.
> 
It will become something like:

clocks = <&topckgen CLK_TOP_NFI1X>,<&topckgen
CLK_TOP_USB_EQ_RX250M>,<&topckgen CLK_TOP_USB_TX250M>,<&topckgen
CLK_TOP_USB_LN0_CK>,<&topckgen CLK_TOP_USB_CDR_CK>,<&topckgen
CLK_TOP_SPINFI_BCK>,<&topckgen CLK_TOP_I2C_BCK>,<&topckgen
CLK_TOP_PEXTP_TL>,<&topckgen CLK_TOP_EMMC_250M>,<&topckgen
CLK_TOP_EMMC_416M>,<&topckgen CLK_TOP_F_26M_ADC_CK>,<&topckgen
CLK_TOP_SYSAXI>,<&topckgen CLK_TOP_NETSYS_WED_MCU>,<&topckgen
CLK_TOP_NETSYS_2X>,<&topckgen CLK_TOP_SGM_325M>,<&topckgen
CLK_TOP_A1SYS>,<&topckgen CLK_TOP_EIP_B>,<&topckgen
CLK_TOP_F26M>,<&topckgen CLK_TOP_AUD_L>,<&topckgen
CLK_TOP_A_TUNER>,<&topckgen CLK_TOP_U2U3_REF>,<&topckgen
CLK_TOP_U2U3_SYS>,<&topckgen CLK_TOP_U2U3_XHCI>,<&topckgen
CLK_TOP_AP2CNN_HOST>,<&topckgen CLK_TOP_NFI1X_SEL>,<&topckgen
CLK_TOP_SPINFI_SEL>,<&topckgen CLK_TOP_SPI_SEL>,<&topckgen
CLK_TOP_SPIM_MST_SEL>,<&topckgen CLK_TOP_UART_SEL>,<&topckgen
CLK_TOP_PWM_SEL>,<&topckgen CLK_TOP_I2C_SEL>,<&topckgen
CLK_TOP_PEXTP_TL_SEL>,<&topckgen CLK_TOP_EMMC_250M_SEL>,<&topckgen
CLK_TOP_EMMC_416M_SEL>,<&topckgen CLK_TOP_F_26M_ADC_SEL>,<&topckgen
CLK_TOP_DRAMC_SEL>,<&topckgen CLK_TOP_DRAMC_MD32_SEL>,<&topckgen
CLK_TOP_SYSAXI_SEL>,<&topckgen CLK_TOP_SYSAPB_SEL>,<&topckgen
CLK_TOP_ARM_DB_MAIN_SEL>,<&topckgen CLK_TOP_ARM_DB_JTSEL>,<&topckgen
CLK_TOP_NETSYS_SEL>,<&topckgen CLK_TOP_NETSYS_500M_SEL>,<&topckgen
CLK_TOP_NETSYS_MCU_SEL>,<&topckgen CLK_TOP_NETSYS_2X_SEL>,<&topckgen
CLK_TOP_SGM_325M_SEL>,<&topckgen CLK_TOP_SGM_REG_SEL>,<&topckgen
CLK_TOP_A1SYS_SEL>,<&topckgen CLK_TOP_CONN_MCUSYS_SEL>,<&topckgen
CLK_TOP_EIP_B_SEL>,<&topckgen CLK_TOP_PCIE_PHY_SEL>,<&topckgen
CLK_TOP_USB3_PHY_SEL>,<&topckgen CLK_TOP_F26M_SEL>,<&topckgen
CLK_TOP_AUD_L_SEL>,<&topckgen CLK_TOP_A_TUNER_SEL>,<&topckgen
CLK_TOP_U2U3_SEL>,<&topckgen CLK_TOP_U2U3_SYS_SEL>,<&topckgen
CLK_TOP_U2U3_XHCI_SEL>,<&topckgen CLK_TOP_DA_U2_REFSEL>,<&topckgen
CLK_TOP_DA_U2_CK_1P_SEL>,<&topckgen CLK_TOP_AP2CNN_HOST_SEL>;

I don't think this is okay in device tree...


> > > > > Dual license please (and the dts files).
> > > > 
> > > > Okay, thanks for your comment, I will update this in the next
> > > > patch
> > > > set
> > > > 
> > > > > Why are this and other 1:1 factor clks needed? They look like
> > > > > placeholders. Please remove them.
> > > > 
> > > > Okay, thanks for your comment, I will update this in the next
> > > > patch
> > > > set
> > > 
> > > Ideally the clock driver would use the device tree to get local
> > > references
> > > for this, but that is going to require some rework to Mediatek's
> > > common
> > > clock code.
> > > 
> > 
> > To transfer the clock relationship through the device tree, it is
> > necessary to make modifications to the common part of the mtk clock
> > driver that has been merged, and may also modify other mediatek
> > clock
> > drivers.
> > 
> > Let's move to the source code:
> > 
> > apmixedsys {
> >     ...
> > }
> > 
> > topckgen {
> >     ...
> >     clocks = ... , <&apmixedsys NET2PLL> , ... ;
> >     clock-names = ... , "net2pll" , ... ;
> > }
> > 
> > char *parent_name;
> >     for each clk in <device_tree_node>:
> >         parent_name = __clk_get_name(of_clk_get(np, i))
> > 
> > (armada-37xx-tbg.c use this method to get global name of parent
> > clock)
> > 
> > Ideally, we should use the parent_name variable above to create a
> > clock, But mtk_fixed_factor expects input const strings
> > 
> > void mtk_clk_register_factors(const struct mtk_fixed_factor *clks,
> > ...)
> > 
> > struct mtk_fixed_factor {
> >     ...
> >     const char *name;
> >     const char *parent;
> >     ...
> > };
> > 
> > So we still need to use pre-defined clock name in static const
> > clock
> > table even we can get clock name as variable from device tree.
> > 
> > 
> > static const struct mtk_fixed_factor top_divs[] __initconst = {
> >     ...
> >     FACTOR(CK_TOP_NET2_D4_D2, "net2_d4_d2", "net2pll", 1, 8),
> >     FACTOR(CK_TOP_NET2_D3_D2, "net2_d3_d2", "net2pll", 1, 2),
> >     ...
> > }
> 
> Right. I'm not asking you to do this right away. This will end up
> being
> a long migration over multiple releases. But it makes sense to get
> the
> device tree bindings sorted out first.
> 
> I believe the solution is to move to `struct clk_parent_data` to
> replace
> the pure strings. New internal APIs for the Mediatek clock driver
> would
> need to be added, and all the drivers slowly migrated over. Probably
> also
> a good time to migrate to clk_hw_*_register.
> 
> 
> ChenYu
> 
> 
> 
> 
> > > > > Merge duplicate parent instances
> > > > 
> > > > We have considered this in the MT7986 basic clock driver, but I
> > > > will
> > > > check again. If corrections are needed, I will make changes in
> > > > the
> > > > next
> > > > patch set.
> > > > 
> > > > > Leaking clk_data if some function return fail
> > > > 
> > > > Okay, thanks for your comment, I will update this in the next
> > > > patch
> > > > set
> > > > 
> > > > > This file contains four drivers. They do not have depend on
> > > > > each
> > > > > other, and do not need to be in the same file. Please split
> > > > > them
> > > > > into
> > > > > differen files and preferably different patches
> > > > 
> > > > Okay, thanks for your comment, I will separate those clock
> > > > drivers
> > > > in
> > > > the next patch set
> > > > 
> > > > > Is there any particular reason for arch_initcall
> > > > 
> > > > We have considered this in MT7986 basic clock driver, and use
> > > > CLK_OF_DECLARE instead of arch_initcall.
> > > 
> > > Having to sequence clock registration manually is likely a
> > > symptom of
> > > inadequate clock dependency handling. So if the drivers are only
> > > using
> > > global clock names to describe parents, what happens is that even
> > > if
> > > the parent isn't in the system yet, the registration is allowed
> > > to
> > > succeed. However since the parent clock isn't available yet, any
> > > calculations involving it, such as calculating clock rates, will
> > > yield invalid results, such as 0 clock rate.
> > > 
> > > > Another question:
> > > > Should the clock patches in "Add basic SoC support for MediaTek
> > > > mt7986"
> > > > need to be separated into another patch series, such as MT8195
> > > > "Mediatek MT8195 clock support" ?
> > > 
> > > Nope. The MT8195 team seems to be splitting things up by module,
> > > with
> > > the device tree being its own separate module. Ideally you want
> > > to
> > > send
> > > drivers along with the related device tree changes, so people
> > > reviewing
> > > can get a sense of how things work. And if the hardware is
> > > publicly
> > > available, people can actually test the changes. We can't do that
> > > if
> > > the
> > > device tree changes aren't bundled together.
> > > 
> > 
> > OK, I will keep clock patches and basic part patches in the same
> > series
> > (patches v2)
> > 


Regards,
Sam

> > Thanks, I will delete some clocks that are not expected to b

^ permalink raw reply	[flat|nested] 26+ messages in thread

end of thread, other threads:[~2021-08-13  6:40 UTC | newest]

Thread overview: 26+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-07-26  7:14 [PATCH 00/12] Add basic SoC support for mediatek mt7986 Sam Shih
2021-07-26  7:14 ` [PATCH 01/12] dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC Sam Shih
2021-07-26  9:20   ` Chen-Yu Tsai
2021-07-30  6:01     ` Sam Shih
2021-07-30  6:30       ` Chen-Yu Tsai
2021-08-13  5:22         ` Sam Shih
2021-08-13  6:15           ` Chen-Yu Tsai
2021-08-13  6:40             ` Sam Shih
2021-07-26  7:14 ` [PATCH 02/12] clk: mediatek: add mt7986 clock IDs Sam Shih
2021-07-29 22:48   ` Rob Herring
2021-07-26  7:14 ` [PATCH 03/12] clk: mediatek: add mt7986 clock support Sam Shih
2021-07-26  7:14 ` [PATCH 04/12] pinctrl: mediatek: moore: use pin number in mtk_pin_desc instead of array index Sam Shih
2021-07-28 18:26   ` Sean Wang
2021-07-26  7:14 ` [PATCH 05/12] dt-bindings: pinctrl: update bindings for MT7986 SoC Sam Shih
2021-07-29 22:51   ` Rob Herring
2021-07-26  7:14 ` [PATCH 06/12] pinctrl: mediatek: add support " Sam Shih
2021-07-26  7:14 ` [PATCH 07/12] dt-bindings: arm64: dts: mediatek: Add mt7986 series Sam Shih
2021-07-29 22:51   ` Rob Herring
2021-07-26  7:14 ` [PATCH 08/12] dt-bindings: rng: mediatek: add mt7986 to mtk rng binding Sam Shih
2021-07-29 22:53   ` Rob Herring
2021-07-26  7:14 ` [PATCH 09/12] dt-bindings: serial: Add compatible for Mediatek MT7986 Sam Shih
2021-07-26  7:14 ` [PATCH 10/12] dt-bindings: watchdog: " Sam Shih
2021-07-29 22:53   ` Rob Herring
2021-08-01 20:48   ` Guenter Roeck
2021-07-26  7:14 ` [PATCH 11/12] arm64: dts: mediatek: add mt7986a support Sam Shih
2021-07-26  7:14 ` [PATCH 12/12] arm64: dts: mediatek: add mt7986b support Sam Shih

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).