linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329
@ 2021-08-05  4:57 Samuel Holland
  2021-08-05  4:57 ` [PATCH v2 2/3] dt-bindings: watchdog: sunxi: Add compatible for D1 Samuel Holland
                   ` (3 more replies)
  0 siblings, 4 replies; 9+ messages in thread
From: Samuel Holland @ 2021-08-05  4:57 UTC (permalink / raw)
  To: Wim Van Sebroeck, Guenter Roeck, Rob Herring, Maxime Ripard,
	Chen-Yu Tsai, Jernej Skrabec
  Cc: devicetree, linux-arm-kernel, linux-sunxi, linux-watchdog,
	linux-kernel, Samuel Holland

On existing SoCs, the watchdog has a single clock input: HOSC (OSC24M)
divided by 750.  However, starting with R329, LOSC (OSC32k) is added as
an alternative clock source, with a bit to switch between them.

Since 24 MHz / 750 == 32 kHz, not 32.768 kHz, the hardware adjusts the
cycle counts to keep the timeouts independent of the clock source. This
keeps the programming interface backward-compatible.

R329 also adds two new registers, to allow software to immediately drive
the SoC reset signal.

Signed-off-by: Samuel Holland <samuel@sholland.org>
---
Changes v1 to v2:
 - Switch from enum to const
 - Add descriptions to "clocks" items

 .../watchdog/allwinner,sun4i-a10-wdt.yaml     | 32 ++++++++++++++++++-
 1 file changed, 31 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
index 9aa3c313c49f..8fa5b0d32381 100644
--- a/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/allwinner,sun4i-a10-wdt.yaml
@@ -24,6 +24,7 @@ properties:
               - allwinner,sun50i-a100-wdt
               - allwinner,sun50i-h6-wdt
               - allwinner,sun50i-h616-wdt
+              - allwinner,sun50i-r329-wdt
           - const: allwinner,sun6i-a31-wdt
       - items:
           - const: allwinner,suniv-f1c100s-wdt
@@ -33,7 +34,18 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: High-frequency oscillator input, divided internally
+      - description: Low-frequency oscillator input, only found on some variants
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: hosc
+      - const: losc
 
   interrupts:
     maxItems: 1
@@ -44,6 +56,24 @@ required:
   - clocks
   - interrupts
 
+if:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - allwinner,sun50i-r329-wdt
+
+then:
+  properties:
+    clocks:
+      minItems: 2
+
+    clock-names:
+      minItems: 2
+
+  required:
+    - clock-names
+
 unevaluatedProperties: false
 
 examples:
-- 
2.31.1


^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2021-08-28 16:23 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-08-05  4:57 [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329 Samuel Holland
2021-08-05  4:57 ` [PATCH v2 2/3] dt-bindings: watchdog: sunxi: Add compatible for D1 Samuel Holland
2021-08-18  9:07   ` Maxime Ripard
2021-08-28 16:23   ` Guenter Roeck
2021-08-05  4:57 ` [PATCH v2 3/3] watchdog: sunxi_wdt: Add support " Samuel Holland
2021-08-18  9:08   ` Maxime Ripard
2021-08-13 17:46 ` [PATCH v2 1/3] dt-bindings: watchdog: sunxi: Add compatible for R329 Rob Herring
2021-08-18  9:07 ` Maxime Ripard
2021-08-20  4:04   ` Samuel Holland

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).