[PATCH v5 0/7] Removal of bcm63xx-wdt

[PATCH v5 0/7] Removal of bcm63xx-wdt

[Florian Fainelli]

his patch series prepares the bcm7038_wdt driver to support its bcm63xx
counter part, updates the MIPS BCM63xx platform code to provide the
necessary information about the "periph" clock, and finally proceeds
with removing the bcm63xx_wdt altogether.

This was only compiled tested as I did not have a readily available
BCM63xx system to test with.

This should also help with adding support for BCM4908 which Rafal is
working on.

Changes in v5:
- removed unnecessary "bcm7038-wdt" platform devtype
- added Rob's Reviewed-by tags to the 2 binding patches

Changes in v4:
- fixed binding patch (Rob, Guenter)
- updated Kconfig description title to mention BCM63xx

Changes in v3:

- added Guenter's and Thomas' tags to patch 6
- added missing initialization of id_table
- use Rafal's latest binding patch

Changes in v2:

- added Guenter's Reviewed-by where given
- update binding patch to pass make dt_bindings_check (Rob)

Florian Fainelli (6):
  dt-bindings: watchdog: Add BCM6345 compatible to BCM7038 binding
  watchdog: bcm7038_wdt: Support platform data configuration
  watchdog: Allow building BCM7038_WDT for BCM63XX
  watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt
  MIPS: BCM63XX: Provide platform data to watchdog device
  watchdog: Remove BCM63XX_WDT

Rafał Miłecki (1):
  dt-bindings: watchdog: convert Broadcom's WDT to the json-schema

 .../bindings/watchdog/brcm,bcm7038-wdt.txt    |  19 --
 .../bindings/watchdog/brcm,bcm7038-wdt.yaml   |  43 +++
 arch/mips/bcm63xx/dev-wdt.c                   |   8 +
 drivers/watchdog/Kconfig                      |  17 +-
 drivers/watchdog/Makefile                     |   1 -
 drivers/watchdog/bcm63xx_wdt.c                | 317 ------------------
 drivers/watchdog/bcm7038_wdt.c                |  15 +-
 include/linux/platform_data/bcm7038_wdt.h     |   8 +
 8 files changed, 77 insertions(+), 351 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
 create mode 100644 Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
 delete mode 100644 drivers/watchdog/bcm63xx_wdt.c
 create mode 100644 include/linux/platform_data/bcm7038_wdt.h

-- 
2.25.1

[PATCH v5 1/7] dt-bindings: watchdog: convert Broadcom's WDT to the json-schema

[Florian Fainelli]

From: Rafał Miłecki <rafal@milecki.pl>

This helps validating DTS files.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
 .../bindings/watchdog/brcm,bcm7038-wdt.txt    | 19 ---------
 .../bindings/watchdog/brcm,bcm7038-wdt.yaml   | 41 +++++++++++++++++++
 2 files changed, 41 insertions(+), 19 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
 create mode 100644 Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml

diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
deleted file mode 100644
index 84122270be8f..000000000000
--- a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.txt
+++ /dev/null
@@ -1,19 +0,0 @@
-BCM7038 Watchdog timer
-
-Required properties:
-
-- compatible : should be "brcm,bcm7038-wdt"
-- reg : Specifies base physical address and size of the registers.
-
-Optional properties:
-
-- clocks: The clock running the watchdog. If no clock is found the
-	  driver will default to 27000000 Hz.
-
-Example:
-
-watchdog@f040a7e8 {
-	compatible = "brcm,bcm7038-wdt";
-	clocks = <&upg_fixed>;
-	reg = <0xf040a7e8 0x16>;
-};
diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
new file mode 100644
index 000000000000..ed6210666ead
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/brcm,bcm7038-wdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BCM7038 watchdog timer
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Justin Chen <justinpopo6@gmail.com>
+  - Rafał Miłecki <rafal@milecki.pl>
+
+properties:
+  compatible:
+    const: brcm,bcm7038-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description: >
+      The clock running the watchdog. If no clock is found the driver will
+      default to 27000000 Hz.
+
+unevaluatedProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    watchdog@f040a7e8 {
+      compatible = "brcm,bcm7038-wdt";
+      reg = <0xf040a7e8 0x16>;
+      clocks = <&upg_fixed>;
+    };
-- 
2.25.1

[PATCH v5 2/7] dt-bindings: watchdog: Add BCM6345 compatible to BCM7038 binding

[Florian Fainelli]

The BCM7038 watchdog binding is updated to include a "brcm,bcm6345-wdt"
compatible string which is the first instance of a DSL (BCM63xx) SoC
seeing the integration of such a watchdog timer block.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 .../devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml      | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
index ed6210666ead..a926809352b8 100644
--- a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
+++ b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
@@ -4,7 +4,7 @@
 $id: http://devicetree.org/schemas/watchdog/brcm,bcm7038-wdt.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: BCM7038 watchdog timer
+title: BCM63xx and BCM7038 watchdog timer
 
 allOf:
   - $ref: "watchdog.yaml#"
@@ -16,7 +16,9 @@ maintainers:
 
 properties:
   compatible:
-    const: brcm,bcm7038-wdt
+    enum:
+      - brcm,bcm6345-wdt
+      - brcm,bcm7038-wdt
 
   reg:
     maxItems: 1
-- 
2.25.1

[PATCH v5 3/7] watchdog: bcm7038_wdt: Support platform data configuration

[Florian Fainelli]

The BCM7038 watchdog driver needs to be able to obtain a specific clock
name on BCM63xx platforms which is the "periph" clock ticking at 50MHz.
make it possible to specify the clock name to obtain via platform data.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/watchdog/bcm7038_wdt.c            | 8 +++++++-
 include/linux/platform_data/bcm7038_wdt.h | 8 ++++++++
 2 files changed, 15 insertions(+), 1 deletion(-)
 create mode 100644 include/linux/platform_data/bcm7038_wdt.h

diff --git a/drivers/watchdog/bcm7038_wdt.c b/drivers/watchdog/bcm7038_wdt.c
index acaaa0005d5b..506cd7ef9c77 100644
--- a/drivers/watchdog/bcm7038_wdt.c
+++ b/drivers/watchdog/bcm7038_wdt.c
@@ -10,6 +10,7 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/bcm7038_wdt.h>
 #include <linux/pm.h>
 #include <linux/watchdog.h>
 
@@ -133,8 +134,10 @@ static void bcm7038_clk_disable_unprepare(void *data)
 
 static int bcm7038_wdt_probe(struct platform_device *pdev)
 {
+	struct bcm7038_wdt_platform_data *pdata = pdev->dev.platform_data;
 	struct device *dev = &pdev->dev;
 	struct bcm7038_watchdog *wdt;
+	const char *clk_name = NULL;
 	int err;
 
 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
@@ -147,7 +150,10 @@ static int bcm7038_wdt_probe(struct platform_device *pdev)
 	if (IS_ERR(wdt->base))
 		return PTR_ERR(wdt->base);
 
-	wdt->clk = devm_clk_get(dev, NULL);
+	if (pdata && pdata->clk_name)
+		clk_name = pdata->clk_name;
+
+	wdt->clk = devm_clk_get(dev, clk_name);
 	/* If unable to get clock, use default frequency */
 	if (!IS_ERR(wdt->clk)) {
 		err = clk_prepare_enable(wdt->clk);
diff --git a/include/linux/platform_data/bcm7038_wdt.h b/include/linux/platform_data/bcm7038_wdt.h
new file mode 100644
index 000000000000..e18cfd9ec8f9
--- /dev/null
+++ b/include/linux/platform_data/bcm7038_wdt.h
@@ -0,0 +1,8 @@
+#ifndef __BCM7038_WDT_PDATA_H
+#define __BCM7038_WDT_PDATA_H
+
+struct bcm7038_wdt_platform_data {
+	const char *clk_name;
+};
+
+#endif /* __BCM7038_WDT_PDATA_H */
-- 
2.25.1

[PATCH v5 4/7] watchdog: Allow building BCM7038_WDT for BCM63XX

[Florian Fainelli]

CONFIG_BCM63XX denotes the legacy MIPS-based DSL SoCs which utilize the
same piece of hardware as a watchdog, make it possible to select that
driver for those platforms.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/watchdog/Kconfig | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 9d222ba17ec6..a86fc5432748 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1740,15 +1740,16 @@ config BCM_KONA_WDT_DEBUG
 	  If in doubt, say 'N'.
 
 config BCM7038_WDT
-	tristate "BCM7038 Watchdog"
+	tristate "BCM63xx/BCM7038 Watchdog"
 	select WATCHDOG_CORE
 	depends on HAS_IOMEM
-	depends on ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST
+	depends on ARCH_BRCMSTB || BMIPS_GENERIC || BCM63XX || COMPILE_TEST
 	help
 	 Watchdog driver for the built-in hardware in Broadcom 7038 and
 	 later SoCs used in set-top boxes.  BCM7038 was made public
 	 during the 2004 CES, and since then, many Broadcom chips use this
-	 watchdog block, including some cable modem chips.
+	 watchdog block, including some cable modem chips and DSL (63xx)
+	 chips.
 
 config IMGPDC_WDT
 	tristate "Imagination Technologies PDC Watchdog Timer"
-- 
2.25.1

[PATCH v5 5/7] watchdog: bcm7038_wdt: Add platform device id for bcm63xx-wdt

[Florian Fainelli]

In order to phase out bcm63xx_wdt and use bcm7038_wdt instead, introduce
a platform_device_id table that allows both names to be matched.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/watchdog/bcm7038_wdt.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/watchdog/bcm7038_wdt.c b/drivers/watchdog/bcm7038_wdt.c
index 506cd7ef9c77..8656a137e9a4 100644
--- a/drivers/watchdog/bcm7038_wdt.c
+++ b/drivers/watchdog/bcm7038_wdt.c
@@ -223,8 +223,15 @@ static const struct of_device_id bcm7038_wdt_match[] = {
 };
 MODULE_DEVICE_TABLE(of, bcm7038_wdt_match);
 
+static const struct platform_device_id bcm7038_wdt_devtype[] = {
+	{ .name = "bcm63xx-wdt" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(platform, bcm7038_wdt_devtype);
+
 static struct platform_driver bcm7038_wdt_driver = {
 	.probe		= bcm7038_wdt_probe,
+	.id_table	= bcm7038_wdt_devtype,
 	.driver		= {
 		.name		= "bcm7038-wdt",
 		.of_match_table	= bcm7038_wdt_match,
-- 
2.25.1

[PATCH v5 6/7] MIPS: BCM63XX: Provide platform data to watchdog device

[Florian Fainelli]

In order to utilize the bcm7038_wdt.c driver which needs to know the
clock name to obtain, pass it via platform data using the
bcm7038_wdt_platform_data structure.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/mips/bcm63xx/dev-wdt.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/arch/mips/bcm63xx/dev-wdt.c b/arch/mips/bcm63xx/dev-wdt.c
index 2a2346a99bcb..42130914a3c2 100644
--- a/arch/mips/bcm63xx/dev-wdt.c
+++ b/arch/mips/bcm63xx/dev-wdt.c
@@ -9,6 +9,7 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/platform_data/bcm7038_wdt.h>
 #include <bcm63xx_cpu.h>
 
 static struct resource wdt_resources[] = {
@@ -19,11 +20,18 @@ static struct resource wdt_resources[] = {
 	},
 };
 
+static struct bcm7038_wdt_platform_data bcm63xx_wdt_pdata = {
+	.clk_name	= "periph",
+};
+
 static struct platform_device bcm63xx_wdt_device = {
 	.name		= "bcm63xx-wdt",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(wdt_resources),
 	.resource	= wdt_resources,
+	.dev		= {
+		.platform_data = &bcm63xx_wdt_pdata,
+	},
 };
 
 int __init bcm63xx_wdt_register(void)
-- 
2.25.1

[PATCH v5 7/7] watchdog: Remove BCM63XX_WDT

[Florian Fainelli]

Now that we can utilize the BCM7038_WDT driver, remove that one which
was not converted to the watchdog APIs. There are a couple of notable
differences with how the bcm7038_wdt driver proceeds:

- bcm63xx_wdt would register with the ad-hoc BCM63xx hardware timer API,
  but this would only be used in order to catch the interrupt *before* a
  SoC reset and make the kernel "die"

- bcm6xx_wdt would register a software timer and kick it every second in
  order to pet the watchdog, thus offering a two step watchdog process.
  This is not something that is brought over to the bcm7038_wdt as it is
  deemed unnecessary. If user-space cannot pet the watchdog, but a
  kernel timer can, the system is still in a bad shape anyway.

bcm7038_wdt is simpler in its behavior and behaves as a standard
watchdog driver and is not making use of any specific platform APIs,
therefore making it more maintainable and extensible.

Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 drivers/watchdog/Kconfig       |  10 --
 drivers/watchdog/Makefile      |   1 -
 drivers/watchdog/bcm63xx_wdt.c | 317 ---------------------------------
 3 files changed, 328 deletions(-)
 delete mode 100644 drivers/watchdog/bcm63xx_wdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index a86fc5432748..98d4cd4093a5 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -1696,16 +1696,6 @@ config OCTEON_WDT
 	  from the first interrupt, it is then only poked when the
 	  device is written.
 
-config BCM63XX_WDT
-	tristate "Broadcom BCM63xx hardware watchdog"
-	depends on BCM63XX
-	help
-	  Watchdog driver for the built in watchdog hardware in Broadcom
-	  BCM63xx SoC.
-
-	  To compile this driver as a loadable module, choose M here.
-	  The module will be called bcm63xx_wdt.
-
 config BCM2835_WDT
 	tristate "Broadcom BCM2835 hardware watchdog"
 	depends on ARCH_BCM2835 || (OF && COMPILE_TEST)
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 2ee97064145b..b01007c0396c 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -153,7 +153,6 @@ obj-$(CONFIG_XILINX_WATCHDOG) += of_xilinx_wdt.o
 # MIPS Architecture
 obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
 obj-$(CONFIG_BCM47XX_WDT) += bcm47xx_wdt.o
-obj-$(CONFIG_BCM63XX_WDT) += bcm63xx_wdt.o
 obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
 obj-$(CONFIG_INDYDOG) += indydog.o
 obj-$(CONFIG_JZ4740_WDT) += jz4740_wdt.o
diff --git a/drivers/watchdog/bcm63xx_wdt.c b/drivers/watchdog/bcm63xx_wdt.c
deleted file mode 100644
index 56cc262571a5..000000000000
--- a/drivers/watchdog/bcm63xx_wdt.c
+++ /dev/null
@@ -1,317 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- *  Broadcom BCM63xx SoC watchdog driver
- *
- *  Copyright (C) 2007, Miguel Gaio <miguel.gaio@efixo.com>
- *  Copyright (C) 2008, Florian Fainelli <florian@openwrt.org>
- *
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/bitops.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/types.h>
-#include <linux/uaccess.h>
-#include <linux/watchdog.h>
-#include <linux/timer.h>
-#include <linux/jiffies.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/resource.h>
-#include <linux/platform_device.h>
-
-#include <bcm63xx_cpu.h>
-#include <bcm63xx_io.h>
-#include <bcm63xx_regs.h>
-#include <bcm63xx_timer.h>
-
-#define PFX KBUILD_MODNAME
-
-#define WDT_HZ		50000000 /* Fclk */
-#define WDT_DEFAULT_TIME	30      /* seconds */
-#define WDT_MAX_TIME		256     /* seconds */
-
-static struct {
-	void __iomem *regs;
-	struct timer_list timer;
-	unsigned long inuse;
-	atomic_t ticks;
-} bcm63xx_wdt_device;
-
-static int expect_close;
-
-static int wdt_time = WDT_DEFAULT_TIME;
-static bool nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, bool, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
-	__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-
-/* HW functions */
-static void bcm63xx_wdt_hw_start(void)
-{
-	bcm_writel(0xfffffffe, bcm63xx_wdt_device.regs + WDT_DEFVAL_REG);
-	bcm_writel(WDT_START_1, bcm63xx_wdt_device.regs + WDT_CTL_REG);
-	bcm_writel(WDT_START_2, bcm63xx_wdt_device.regs + WDT_CTL_REG);
-}
-
-static void bcm63xx_wdt_hw_stop(void)
-{
-	bcm_writel(WDT_STOP_1, bcm63xx_wdt_device.regs + WDT_CTL_REG);
-	bcm_writel(WDT_STOP_2, bcm63xx_wdt_device.regs + WDT_CTL_REG);
-}
-
-static void bcm63xx_wdt_isr(void *data)
-{
-	struct pt_regs *regs = get_irq_regs();
-
-	die(PFX " fire", regs);
-}
-
-static void bcm63xx_timer_tick(struct timer_list *unused)
-{
-	if (!atomic_dec_and_test(&bcm63xx_wdt_device.ticks)) {
-		bcm63xx_wdt_hw_start();
-		mod_timer(&bcm63xx_wdt_device.timer, jiffies + HZ);
-	} else
-		pr_crit("watchdog will restart system\n");
-}
-
-static void bcm63xx_wdt_pet(void)
-{
-	atomic_set(&bcm63xx_wdt_device.ticks, wdt_time);
-}
-
-static void bcm63xx_wdt_start(void)
-{
-	bcm63xx_wdt_pet();
-	bcm63xx_timer_tick(0);
-}
-
-static void bcm63xx_wdt_pause(void)
-{
-	del_timer_sync(&bcm63xx_wdt_device.timer);
-	bcm63xx_wdt_hw_stop();
-}
-
-static int bcm63xx_wdt_settimeout(int new_time)
-{
-	if ((new_time <= 0) || (new_time > WDT_MAX_TIME))
-		return -EINVAL;
-
-	wdt_time = new_time;
-
-	return 0;
-}
-
-static int bcm63xx_wdt_open(struct inode *inode, struct file *file)
-{
-	if (test_and_set_bit(0, &bcm63xx_wdt_device.inuse))
-		return -EBUSY;
-
-	bcm63xx_wdt_start();
-	return stream_open(inode, file);
-}
-
-static int bcm63xx_wdt_release(struct inode *inode, struct file *file)
-{
-	if (expect_close == 42)
-		bcm63xx_wdt_pause();
-	else {
-		pr_crit("Unexpected close, not stopping watchdog!\n");
-		bcm63xx_wdt_start();
-	}
-	clear_bit(0, &bcm63xx_wdt_device.inuse);
-	expect_close = 0;
-	return 0;
-}
-
-static ssize_t bcm63xx_wdt_write(struct file *file, const char *data,
-				size_t len, loff_t *ppos)
-{
-	if (len) {
-		if (!nowayout) {
-			size_t i;
-
-			/* In case it was set long ago */
-			expect_close = 0;
-
-			for (i = 0; i != len; i++) {
-				char c;
-				if (get_user(c, data + i))
-					return -EFAULT;
-				if (c == 'V')
-					expect_close = 42;
-			}
-		}
-		bcm63xx_wdt_pet();
-	}
-	return len;
-}
-
-static struct watchdog_info bcm63xx_wdt_info = {
-	.identity       = PFX,
-	.options        = WDIOF_SETTIMEOUT |
-				WDIOF_KEEPALIVEPING |
-				WDIOF_MAGICCLOSE,
-};
-
-
-static long bcm63xx_wdt_ioctl(struct file *file, unsigned int cmd,
-				unsigned long arg)
-{
-	void __user *argp = (void __user *)arg;
-	int __user *p = argp;
-	int new_value, retval = -EINVAL;
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		return copy_to_user(argp, &bcm63xx_wdt_info,
-			sizeof(bcm63xx_wdt_info)) ? -EFAULT : 0;
-
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		return put_user(0, p);
-
-	case WDIOC_SETOPTIONS:
-		if (get_user(new_value, p))
-			return -EFAULT;
-
-		if (new_value & WDIOS_DISABLECARD) {
-			bcm63xx_wdt_pause();
-			retval = 0;
-		}
-		if (new_value & WDIOS_ENABLECARD) {
-			bcm63xx_wdt_start();
-			retval = 0;
-		}
-
-		return retval;
-
-	case WDIOC_KEEPALIVE:
-		bcm63xx_wdt_pet();
-		return 0;
-
-	case WDIOC_SETTIMEOUT:
-		if (get_user(new_value, p))
-			return -EFAULT;
-
-		if (bcm63xx_wdt_settimeout(new_value))
-			return -EINVAL;
-
-		bcm63xx_wdt_pet();
-
-		fallthrough;
-
-	case WDIOC_GETTIMEOUT:
-		return put_user(wdt_time, p);
-
-	default:
-		return -ENOTTY;
-
-	}
-}
-
-static const struct file_operations bcm63xx_wdt_fops = {
-	.owner		= THIS_MODULE,
-	.llseek		= no_llseek,
-	.write		= bcm63xx_wdt_write,
-	.unlocked_ioctl	= bcm63xx_wdt_ioctl,
-	.compat_ioctl	= compat_ptr_ioctl,
-	.open		= bcm63xx_wdt_open,
-	.release	= bcm63xx_wdt_release,
-};
-
-static struct miscdevice bcm63xx_wdt_miscdev = {
-	.minor	= WATCHDOG_MINOR,
-	.name	= "watchdog",
-	.fops	= &bcm63xx_wdt_fops,
-};
-
-
-static int bcm63xx_wdt_probe(struct platform_device *pdev)
-{
-	int ret;
-	struct resource *r;
-
-	timer_setup(&bcm63xx_wdt_device.timer, bcm63xx_timer_tick, 0);
-
-	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!r) {
-		dev_err(&pdev->dev, "failed to get resources\n");
-		return -ENODEV;
-	}
-
-	bcm63xx_wdt_device.regs = devm_ioremap(&pdev->dev, r->start,
-							resource_size(r));
-	if (!bcm63xx_wdt_device.regs) {
-		dev_err(&pdev->dev, "failed to remap I/O resources\n");
-		return -ENXIO;
-	}
-
-	ret = bcm63xx_timer_register(TIMER_WDT_ID, bcm63xx_wdt_isr, NULL);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to register wdt timer isr\n");
-		return ret;
-	}
-
-	if (bcm63xx_wdt_settimeout(wdt_time)) {
-		bcm63xx_wdt_settimeout(WDT_DEFAULT_TIME);
-		dev_info(&pdev->dev,
-			": wdt_time value must be 1 <= wdt_time <= 256, using %d\n",
-			wdt_time);
-	}
-
-	ret = misc_register(&bcm63xx_wdt_miscdev);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to register watchdog device\n");
-		goto unregister_timer;
-	}
-
-	dev_info(&pdev->dev, " started, timer margin: %d sec\n",
-						WDT_DEFAULT_TIME);
-
-	return 0;
-
-unregister_timer:
-	bcm63xx_timer_unregister(TIMER_WDT_ID);
-	return ret;
-}
-
-static int bcm63xx_wdt_remove(struct platform_device *pdev)
-{
-	if (!nowayout)
-		bcm63xx_wdt_pause();
-
-	misc_deregister(&bcm63xx_wdt_miscdev);
-	bcm63xx_timer_unregister(TIMER_WDT_ID);
-	return 0;
-}
-
-static void bcm63xx_wdt_shutdown(struct platform_device *pdev)
-{
-	bcm63xx_wdt_pause();
-}
-
-static struct platform_driver bcm63xx_wdt_driver = {
-	.probe	= bcm63xx_wdt_probe,
-	.remove = bcm63xx_wdt_remove,
-	.shutdown = bcm63xx_wdt_shutdown,
-	.driver = {
-		.name = "bcm63xx-wdt",
-	}
-};
-
-module_platform_driver(bcm63xx_wdt_driver);
-
-MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>");
-MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>");
-MODULE_DESCRIPTION("Driver for the Broadcom BCM63xx SoC watchdog");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:bcm63xx-wdt");
-- 
2.25.1

Re: [PATCH v5 2/7] dt-bindings: watchdog: Add BCM6345 compatible to BCM7038 binding

[Guenter Roeck]

On Fri, Nov 12, 2021 at 02:46:31PM -0800, Florian Fainelli wrote:
> The BCM7038 watchdog binding is updated to include a "brcm,bcm6345-wdt"
> compatible string which is the first instance of a DSL (BCM63xx) SoC
> seeing the integration of such a watchdog timer block.
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  .../devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml      | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
> index ed6210666ead..a926809352b8 100644
> --- a/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
> +++ b/Documentation/devicetree/bindings/watchdog/brcm,bcm7038-wdt.yaml
> @@ -4,7 +4,7 @@
>  $id: http://devicetree.org/schemas/watchdog/brcm,bcm7038-wdt.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: BCM7038 watchdog timer
> +title: BCM63xx and BCM7038 watchdog timer
>  
>  allOf:
>    - $ref: "watchdog.yaml#"
> @@ -16,7 +16,9 @@ maintainers:
>  
>  properties:
>    compatible:
> -    const: brcm,bcm7038-wdt
> +    enum:
> +      - brcm,bcm6345-wdt
> +      - brcm,bcm7038-wdt
>  
>    reg:
>      maxItems: 1

Re: [PATCH v5 0/7] Removal of bcm63xx-wdt

[Florian Fainelli]

On 11/12/21 2:46 PM, Florian Fainelli wrote:
> his patch series prepares the bcm7038_wdt driver to support its bcm63xx
> counter part, updates the MIPS BCM63xx platform code to provide the
> necessary information about the "periph" clock, and finally proceeds
> with removing the bcm63xx_wdt altogether.
> 
> This was only compiled tested as I did not have a readily available
> BCM63xx system to test with.
> 
> This should also help with adding support for BCM4908 which Rafal is
> working on.
> 
> Changes in v5:
> - removed unnecessary "bcm7038-wdt" platform devtype
> - added Rob's Reviewed-by tags to the 2 binding patches
> 
> Changes in v4:
> - fixed binding patch (Rob, Guenter)
> - updated Kconfig description title to mention BCM63xx
> 
> Changes in v3:
> 
> - added Guenter's and Thomas' tags to patch 6
> - added missing initialization of id_table
> - use Rafal's latest binding patch
> 
> Changes in v2:
> 
> - added Guenter's Reviewed-by where given
> - update binding patch to pass make dt_bindings_check (Rob)

Are we good with this version? If so, could it be picked up so we have
one less driver to care about, and we have one additional binding
converted to YAML?

Thanks!
-- 
Florian

Re: [PATCH v5 0/7] Removal of bcm63xx-wdt

[Guenter Roeck]

On 12/3/21 12:07 PM, Florian Fainelli wrote:
> On 11/12/21 2:46 PM, Florian Fainelli wrote:
>> his patch series prepares the bcm7038_wdt driver to support its bcm63xx
>> counter part, updates the MIPS BCM63xx platform code to provide the
>> necessary information about the "periph" clock, and finally proceeds
>> with removing the bcm63xx_wdt altogether.
>>
>> This was only compiled tested as I did not have a readily available
>> BCM63xx system to test with.
>>
>> This should also help with adding support for BCM4908 which Rafal is
>> working on.
>>
>> Changes in v5:
>> - removed unnecessary "bcm7038-wdt" platform devtype
>> - added Rob's Reviewed-by tags to the 2 binding patches
>>
>> Changes in v4:
>> - fixed binding patch (Rob, Guenter)
>> - updated Kconfig description title to mention BCM63xx
>>
>> Changes in v3:
>>
>> - added Guenter's and Thomas' tags to patch 6
>> - added missing initialization of id_table
>> - use Rafal's latest binding patch
>>
>> Changes in v2:
>>
>> - added Guenter's Reviewed-by where given
>> - update binding patch to pass make dt_bindings_check (Rob)
> 
> Are we good with this version? If so, could it be picked up so we have
> one less driver to care about, and we have one additional binding
> converted to YAML?
> 

It is queued in my watchdog-next branch, so Wim will hopefully
pick it up either from there or from the mailing list.

Guenter