linux-watchdog.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 00/17] Add support for MT8365 EVK board
@ 2022-05-31 13:50 Fabien Parent
  2022-05-31 13:50 ` [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC Fabien Parent
                   ` (18 more replies)
  0 siblings, 19 replies; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

This patch series adds support for the MT8365 EVK board.

This series has dependencies on the following series:
https://patchwork.kernel.org/project/linux-mediatek/list/?series=646256
https://patchwork.kernel.org/project/linux-mediatek/list/?series=646091
https://patchwork.kernel.org/project/linux-mediatek/list/?series=646083
https://patchwork.kernel.org/project/linux-mediatek/list/?series=646081
https://patchwork.kernel.org/project/linux-mediatek/list/?series=646076
https://patchwork.kernel.org/project/linux-mediatek/list/?series=646068
https://patchwork.kernel.org/project/linux-mediatek/list/?series=646020
https://patchwork.kernel.org/project/linux-mediatek/list/?series=646052
https://lore.kernel.org/r/20220504091923.2219-2-rex-bc.chen@mediatek.com 
https://lore.kernel.org/r/20220512062622.31484-2-chunfeng.yun@mediatek.com 
https://lore.kernel.org/r/20220512062622.31484-1-chunfeng.yun@mediatek.com
https://lore.kernel.org/r/20220524115019.97246-1-angelogioacchino.delregno@collabora.com
https://lore.kernel.org/all/20220127015857.9868-1-biao.huang@mediatek.com/

Fabien Parent (17):
  dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  dt-bindings: memory: add mt8365 SoC binding documentation
  dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC
  dt-bindings: arm: mediatek: Add binding for mt8365-evk board
  dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings
  dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings
  dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings
  dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings
  dt-bindings: spi: mt65xx: add MT8365 SoC bindings
  dt-bindings: serial: mediatek: add MT8365 bindings
  dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  dt-bindings: phy: mediatek,tphy: add MT8365 SoC bindings
  dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  arm64: dts: mediatek: add mt6357 device-tree
  arm64: dts: mediatek: add mt8365 device-tree
  arm64: dts: mediatek: add mt8365-evk board device-tree

 .../devicetree/bindings/arm/mediatek.yaml     |    4 +
 .../bindings/dma/mediatek,uart-dma.yaml       |    1 +
 .../devicetree/bindings/i2c/i2c-mt65xx.yaml   |    4 +
 .../iio/adc/mediatek,mt2701-auxadc.yaml       |    1 +
 .../mediatek,smi-common.yaml                  |    6 +
 .../memory-controllers/mediatek,smi-larb.yaml |    6 +
 .../devicetree/bindings/mmc/mtk-sd.yaml       |    3 +
 .../bindings/nvmem/mediatek,efuse.yaml        |    1 +
 .../bindings/phy/mediatek,dsi-phy.yaml        |    4 +
 .../bindings/phy/mediatek,tphy.yaml           |    1 +
 .../bindings/serial/mediatek,uart.yaml        |    1 +
 .../bindings/spi/mediatek,spi-mt65xx.yaml     |    1 +
 .../bindings/usb/mediatek,mtk-xhci.yaml       |    1 +
 .../bindings/usb/mediatek,mtu3.yaml           |    1 +
 .../devicetree/bindings/watchdog/mtk-wdt.txt  |    1 +
 arch/arm64/boot/dts/mediatek/Makefile         |    1 +
 arch/arm64/boot/dts/mediatek/mt6357.dtsi      |  272 +++++
 arch/arm64/boot/dts/mediatek/mt8365-evk.dts   |  578 +++++++++
 arch/arm64/boot/dts/mediatek/mt8365.dtsi      | 1047 +++++++++++++++++
 19 files changed, 1934 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt6357.dtsi
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi

-- 
2.36.1


^ permalink raw reply	[flat|nested] 44+ messages in thread

* [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01  9:34   ` Krzysztof Kozlowski
  2022-05-31 13:50 ` [PATCH 02/17] dt-bindings: memory: add mt8365 SoC binding documentation Fabien Parent
                   ` (17 subsequent siblings)
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent, Rob Herring

Add binding documentation for the MT8365 I2C controllers.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
---
 Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
index 16a1a3118204..a6fe0d8b0cbe 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
@@ -43,6 +43,10 @@ properties:
           - enum:
               - mediatek,mt8195-i2c
           - const: mediatek,mt8192-i2c
+      - items:
+          - enum:
+              - mediatek,mt8365-i2c
+          - const: mediatek,mt8168-i2c
 
   reg:
     items:
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 02/17] dt-bindings: memory: add mt8365 SoC binding documentation
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
  2022-05-31 13:50 ` [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01  9:34   ` Krzysztof Kozlowski
  2022-05-31 13:50 ` [PATCH 03/17] dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC Fabien Parent
                   ` (16 subsequent siblings)
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux, Yong Wu, Krzysztof Kozlowski
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add MediaTek SMI bindings for MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 .../bindings/memory-controllers/mediatek,smi-common.yaml    | 6 ++++++
 .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6 ++++++
 2 files changed, 12 insertions(+)

diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
index a98b359bf909..e1029ac99ab4 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
@@ -46,6 +46,11 @@ properties:
           - const: mediatek,mt7623-smi-common
           - const: mediatek,mt2701-smi-common
 
+      - description: for mt8365
+        items:
+          - const: mediatek,mt8365-smi-common
+          - const: mediatek,mt8186-smi-common
+
   reg:
     maxItems: 1
 
@@ -130,6 +135,7 @@ allOf:
             - mediatek,mt8192-smi-common
             - mediatek,mt8195-smi-common-vdo
             - mediatek,mt8195-smi-common-vpp
+            - mediatek,mt8365-smi-common
 
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
index c886681f62a7..815d87fc64a0 100644
--- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
@@ -32,6 +32,11 @@ properties:
           - const: mediatek,mt7623-smi-larb
           - const: mediatek,mt2701-smi-larb
 
+      - description: for mt8365
+        items:
+          - const: mediatek,mt8365-smi-larb
+          - const: mediatek,mt8186-smi-larb
+
   reg:
     maxItems: 1
 
@@ -78,6 +83,7 @@ allOf:
             - mediatek,mt8183-smi-larb
             - mediatek,mt8186-smi-larb
             - mediatek,mt8195-smi-larb
+            - mediatek,mt8365-smi-larb
 
     then:
       properties:
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 03/17] dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
  2022-05-31 13:50 ` [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC Fabien Parent
  2022-05-31 13:50 ` [PATCH 02/17] dt-bindings: memory: add mt8365 SoC binding documentation Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01  9:35   ` Krzysztof Kozlowski
  2022-05-31 13:50 ` [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board Fabien Parent
                   ` (15 subsequent siblings)
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux, Wenbin Mei
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add MMC bindings for MT8365 bindings.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
index 2a2e9fa8c188..3195b80ef057 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
@@ -38,6 +38,9 @@ properties:
       - items:
           - const: mediatek,mt8195-mmc
           - const: mediatek,mt8183-mmc
+      - items:
+          - const: mediatek,mt8365-mmc
+          - const: mediatek,mt8183-mmc
 
   reg:
     minItems: 1
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (2 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 03/17] dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01  9:36   ` Krzysztof Kozlowski
  2022-05-31 13:50 ` [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings Fabien Parent
                   ` (14 subsequent siblings)
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux, Sean Wang
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add binding documentation for the MT8365-EVK board. The MT8365 EVK board
has the following IOs:
* DPI <-> HDMI bridge and HDMI connector.
* 2 audio jack
* 1 USB Type-A Host port
* 2 UART to USB port
* 1 battery connector
* 1 eMMC
* 1 SD card
* 2 camera connectors
* 1 M.2 slot for connectivity
* 1 DSI connector + touchscreen connector
* RPI compatible header
* 1 Ethernet port

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 Documentation/devicetree/bindings/arm/mediatek.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index 4a2bd9759c47..a4b1288fa837 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -216,6 +216,10 @@ properties:
           - enum:
               - mediatek,mt8516-pumpkin
           - const: mediatek,mt8516
+      - items:
+          - enum:
+              - mediatek,mt8365-evk
+          - const: mediatek,mt8365
 
 additionalProperties: true
 
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (3 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01  9:36   ` Krzysztof Kozlowski
  2022-06-09  5:56   ` Vinod Koul
  2022-05-31 13:50 ` [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings Fabien Parent
                   ` (13 subsequent siblings)
  18 siblings, 2 replies; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux, Long Cheng
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add binding documentation in order to support the MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
index 54d68fc688b5..19ea8dcbcbce 100644
--- a/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
@@ -22,6 +22,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt2712-uart-dma
+              - mediatek,mt8365-uart-dma
               - mediatek,mt8516-uart-dma
           - const: mediatek,mt6577-uart-dma
       - enum:
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (4 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01 10:01   ` Krzysztof Kozlowski
  2022-05-31 13:50 ` [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings Fabien Parent
                   ` (12 subsequent siblings)
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux, Lars-Peter Clausen,
	Zhiyong Tao
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add binding for the ADC present in MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 .../devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml      | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
index 65581ad4b816..364a23be73bc 100644
--- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
@@ -37,6 +37,7 @@ properties:
               - mediatek,mt8186-auxadc
               - mediatek,mt8195-auxadc
               - mediatek,mt8516-auxadc
+              - mediatek,mt8365-auxadc
           - const: mediatek,mt8173-auxadc
 
   reg:
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (5 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01 10:01   ` Krzysztof Kozlowski
  2022-05-31 13:50 ` [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings Fabien Parent
                   ` (11 subsequent siblings)
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux, Andrew-CT Chen, Lala Lin
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add bindings documentation for the efuse driver on MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
index 7c7233e29ecf..444875264493 100644
--- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
+++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
@@ -32,6 +32,7 @@ properties:
               - mediatek,mt8192-efuse
               - mediatek,mt8195-efuse
               - mediatek,mt8516-efuse
+              - mediatek,mt8365-efuse
           - const: mediatek,efuse
       - const: mediatek,mt8173-efuse
         deprecated: true
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (6 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01 10:03   ` Krzysztof Kozlowski
  2022-05-31 13:50 ` [PATCH 09/17] dt-bindings: spi: mt65xx: add " Fabien Parent
                   ` (10 subsequent siblings)
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add binding documentation for the MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 Documentation/devicetree/bindings/watchdog/mtk-wdt.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index a97418c74f6b..0e63c4ba3785 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -19,6 +19,7 @@ Required properties:
 	"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
 	"mediatek,mt8192-wdt": for MT8192
 	"mediatek,mt8195-wdt", "mediatek,mt6589-wdt": for MT8195
+	"mediatek,mt8365-wdt", "mediatek,mt6589-wdt": for MT8365
 
 - reg : Specifies base physical address and size of the registers.
 
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 09/17] dt-bindings: spi: mt65xx: add MT8365 SoC bindings
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (7 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01 10:02   ` Krzysztof Kozlowski
  2022-05-31 13:50 ` [PATCH 10/17] dt-bindings: serial: mediatek: add MT8365 bindings Fabien Parent
                   ` (9 subsequent siblings)
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux, Leilk Liu
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add binding documentation for the MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
index 94ef0552bd42..d3d34a3a0b7f 100644
--- a/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
+++ b/Documentation/devicetree/bindings/spi/mediatek,spi-mt65xx.yaml
@@ -18,6 +18,7 @@ properties:
       - items:
           - enum:
               - mediatek,mt7629-spi
+              - mediatek,mt8365-spi
           - const: mediatek,mt7622-spi
       - items:
           - enum:
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 10/17] dt-bindings: serial: mediatek: add MT8365 bindings
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (8 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 09/17] dt-bindings: spi: mt65xx: add " Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01 10:12   ` Krzysztof Kozlowski
  2022-05-31 13:50 ` [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings Fabien Parent
                   ` (8 subsequent siblings)
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux, Greg Kroah-Hartman
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add binding documentation for the MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 Documentation/devicetree/bindings/serial/mediatek,uart.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
index 4ff27d6d4d5b..71e78f285e47 100644
--- a/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
+++ b/Documentation/devicetree/bindings/serial/mediatek,uart.yaml
@@ -44,6 +44,7 @@ properties:
               - mediatek,mt8186-uart
               - mediatek,mt8192-uart
               - mediatek,mt8195-uart
+              - mediatek,mt8365-uart
               - mediatek,mt8516-uart
           - const: mediatek,mt6577-uart
 
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (9 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 10/17] dt-bindings: serial: mediatek: add MT8365 bindings Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01 10:13   ` Krzysztof Kozlowski
  2022-06-09  5:58   ` Vinod Koul
  2022-05-31 13:50 ` [PATCH 12/17] dt-bindings: phy: mediatek,tphy: add " Fabien Parent
                   ` (7 subsequent siblings)
  18 siblings, 2 replies; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux, Kishon Vijay Abraham I,
	Chun-Kuang Hu, Philipp Zabel
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add binding documentation for the MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
index 6e4d795f9b02..9c2a7345955d 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
@@ -24,6 +24,10 @@ properties:
           - enum:
               - mediatek,mt7623-mipi-tx
           - const: mediatek,mt2701-mipi-tx
+      - items:
+          - enum:
+              - mediatek,mt8365-mipi-tx
+          - const: mediatek,mt8183-mipi-tx
       - const: mediatek,mt2701-mipi-tx
       - const: mediatek,mt8173-mipi-tx
       - const: mediatek,mt8183-mipi-tx
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 12/17] dt-bindings: phy: mediatek,tphy: add MT8365 SoC bindings
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (10 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01 10:13   ` Krzysztof Kozlowski
  2022-05-31 13:50 ` [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: " Fabien Parent
                   ` (6 subsequent siblings)
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux, Kishon Vijay Abraham I
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add binding documentation for the MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 Documentation/devicetree/bindings/phy/mediatek,tphy.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index 7b2e1bc119be..4b638c1d4221 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -82,6 +82,7 @@ properties:
               - mediatek,mt8183-tphy
               - mediatek,mt8186-tphy
               - mediatek,mt8192-tphy
+              - mediatek,mt8365-tphy
           - const: mediatek,generic-tphy-v2
       - items:
           - enum:
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (11 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 12/17] dt-bindings: phy: mediatek,tphy: add " Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01 10:14   ` Krzysztof Kozlowski
  2022-05-31 13:50 ` [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: " Fabien Parent
                   ` (5 subsequent siblings)
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux, Greg Kroah-Hartman
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add binding documentation for the MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
index df766f8de872..9ede6069d9e6 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
@@ -25,6 +25,7 @@ properties:
           - mediatek,mt8173-mtu3
           - mediatek,mt8183-mtu3
           - mediatek,mt8192-mtu3
+          - mediatek,mt8365-mtu3
       - const: mediatek,mtu3
 
   reg:
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (12 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: " Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01 10:14   ` Krzysztof Kozlowski
  2022-05-31 13:50 ` [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree Fabien Parent
                   ` (4 subsequent siblings)
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux, Greg Kroah-Hartman
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add binding documentation for the MT8365 SoC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
index 084d7135b2d9..65f0ce225f13 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.yaml
@@ -33,6 +33,7 @@ properties:
           - mediatek,mt8186-xhci
           - mediatek,mt8192-xhci
           - mediatek,mt8195-xhci
+          - mediatek,mt8365-xhci
       - const: mediatek,mtk-xhci
 
   reg:
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (13 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: " Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01 10:15   ` Krzysztof Kozlowski
  2022-05-31 13:50 ` [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree Fabien Parent
                   ` (3 subsequent siblings)
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add device-tree for the MT6357 PMIC.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt6357.dtsi | 272 +++++++++++++++++++++++
 1 file changed, 272 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt6357.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/mt6357.dtsi b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
new file mode 100644
index 000000000000..a28010119e69
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt6357.dtsi
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ * Copyright (c) 2020 BayLibre Inc.
+ */
+
+#include <dt-bindings/input/input.h>
+
+&pwrap {
+	mt6357_pmic: pmic {
+		compatible = "mediatek,mt6357";
+
+		regulators {
+			mt6357_vproc_reg: buck-vproc {
+				regulator-name = "vproc";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vcore_reg: buck-vcore {
+				regulator-name = "vcore";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vmodem_reg: buck-vmodem {
+				regulator-name = "vmodem";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1193750>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <220>;
+			};
+
+			mt6357_vs1_reg: buck-vs1 {
+				regulator-name = "vs1";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <2200000>;
+				regulator-ramp-delay = <12500>;
+				regulator-enable-ramp-delay = <220>;
+				regulator-always-on;
+			};
+
+			mt6357_vpa_reg: buck-vpa {
+				regulator-name = "vpa";
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <3650000>;
+				regulator-ramp-delay = <50000>;
+				regulator-enable-ramp-delay = <220>;
+			};
+
+			mt6357_vfe28_reg: ldo-vfe28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vfe28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vxo22_reg: ldo-vxo22 {
+				regulator-name = "vxo22";
+				regulator-min-microvolt = <2200000>;
+				regulator-max-microvolt = <2400000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vrf18_reg: ldo-vrf18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vrf12_reg: ldo-vrf12 {
+				compatible = "regulator-fixed";
+				regulator-name = "vrf12";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <110>;
+			};
+
+			mt6357_vefuse_reg: ldo-vefuse {
+				regulator-name = "vefuse";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn33_bt_reg: ldo-vcn33-bt {
+				regulator-name = "vcn33-bt";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn33_wifi_reg: ldo-vcn33-wifi {
+				regulator-name = "vcn33-wifi";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3500000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn28_reg: ldo-vcn28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcn18_reg: ldo-vcn18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcn18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcama_reg: ldo-vcama {
+				regulator-name = "vcama";
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcamd_reg: ldo-vcamd {
+				regulator-name = "vcamd";
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vcamio_reg: ldo-vcamio18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vcamio";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vldo28_reg: ldo-vldo28 {
+				regulator-name = "vldo28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vsram_others_reg: ldo-vsram-others {
+				regulator-name = "vsram-others";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <110>;
+				regulator-always-on;
+			};
+
+			mt6357_vsram_proc_reg: ldo-vsram-proc {
+				regulator-name = "vsram-proc";
+				regulator-min-microvolt = <518750>;
+				regulator-max-microvolt = <1312500>;
+				regulator-ramp-delay = <6250>;
+				regulator-enable-ramp-delay = <110>;
+				regulator-always-on;
+			};
+
+			mt6357_vaux18_reg: ldo-vaux18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaux18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vaud28_reg: ldo-vaud28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vaud28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vio28_reg: ldo-vio28 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio28";
+				regulator-min-microvolt = <2800000>;
+				regulator-max-microvolt = <2800000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vio18_reg: ldo-vio18 {
+				compatible = "regulator-fixed";
+				regulator-name = "vio18";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-enable-ramp-delay = <264>;
+				regulator-always-on;
+			};
+
+			mt6357_vdram_reg: ldo-vdram {
+				regulator-name = "vdram";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1200000>;
+				regulator-enable-ramp-delay = <3300>;
+			};
+
+			mt6357_vmc_reg: ldo-vmc {
+				regulator-name = "vmc";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vmch_reg: ldo-vmch {
+				regulator-name = "vmch";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vemc_reg: ldo-vemc {
+				regulator-name = "vemc";
+				regulator-min-microvolt = <2900000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+				regulator-always-on;
+			};
+
+			mt6357_vsim1_reg: ldo-vsim1 {
+				regulator-name = "vsim1";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vsim2_reg: ldo-vsim2 {
+				regulator-name = "vsim2";
+				regulator-min-microvolt = <1700000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+
+			mt6357_vibr_reg: ldo-vibr {
+				regulator-name = "vibr";
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-enable-ramp-delay = <44>;
+			};
+
+			mt6357_vusb33_reg: ldo-vusb33 {
+				regulator-name = "vusb33";
+				regulator-min-microvolt = <3000000>;
+				regulator-max-microvolt = <3100000>;
+				regulator-enable-ramp-delay = <264>;
+			};
+		};
+
+		mt6357rtc: mt6357rtc {
+			compatible = "mediatek,mt6357-rtc",
+				     "mediatek,mt6358-rtc";
+		};
+
+		mt6357keys: mt6357keys {
+			compatible = "mediatek,mt6357-keys";
+		};
+	};
+};
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (14 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01 10:37   ` Krzysztof Kozlowski
                     ` (2 more replies)
  2022-05-31 13:50 ` [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree Fabien Parent
                   ` (2 subsequent siblings)
  18 siblings, 3 replies; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add device-tree for the MT8365 SoC. More information can be found
about that SoC at the following address:
https://www.mediatek.com/products/aiot/i350-mt8365

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/mt8365.dtsi | 1047 ++++++++++++++++++++++
 1 file changed, 1047 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi

diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
new file mode 100644
index 000000000000..e22b1d259418
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -0,0 +1,1047 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2018 MediaTek Inc.
+ */
+
+#include <dt-bindings/clock/mediatek,mt8365-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/power/mt8365-power.h>
+#include <dt-bindings/memory/mt8365-larb-port.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+	compatible = "mediatek,mt8365";
+	interrupt-parent = <&sysirq>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ovl0 = &ovl0;
+		rdma0 = &rdma0;
+		rdma1 = &rdma1;
+		color0 = &color0;
+		ccorr0 = &ccorr0;
+		aal0 = &aal0;
+		gamma0 = &gamma0;
+		dither0 = &dither0;
+		dsi0 = &dsi0;
+		dpi0 = &dpi0;
+	};
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			clock-frequency = <1600000000>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate";
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			clock-frequency = <1600000000>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			clock-frequency = <1600000000>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			clock-frequency = <1600000000>;
+			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
+				 <&apmixedsys CLK_APMIXED_MAINPLL>;
+			clock-names = "cpu", "intermediate", "armpll";
+			operating-points-v2 = <&cluster0_opp>;
+			#cooling-cells = <2>;
+			enable-method = "psci";
+		};
+	};
+
+	cluster0_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+		opp-850000000 {
+			opp-hz = /bits/ 64 <850000000>;
+			opp-microvolt = <650000>;
+		};
+		opp-918000000 {
+			opp-hz = /bits/ 64 <918000000>;
+			opp-microvolt = <668750>;
+		};
+		opp-987000000 {
+			opp-hz = /bits/ 64 <987000000>;
+			opp-microvolt = <687500>;
+		};
+		opp-1056000000 {
+			opp-hz = /bits/ 64 <1056000000>;
+			opp-microvolt = <706250>;
+		};
+		opp-1125000000 {
+			opp-hz = /bits/ 64 <1125000000>;
+			opp-microvolt = <725000>;
+		};
+		opp-1216000000 {
+			opp-hz = /bits/ 64 <1216000000>;
+			opp-microvolt = <750000>;
+		};
+		opp-1308000000 {
+			opp-hz = /bits/ 64 <1308000000>;
+			opp-microvolt = <775000>;
+		};
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-microvolt = <800000>;
+		};
+		opp-1466000000 {
+			opp-hz = /bits/ 64 <1466000000>;
+			opp-microvolt = <825000>;
+		};
+		opp-1533000000 {
+			opp-hz = /bits/ 64 <1533000000>;
+			opp-microvolt = <850000>;
+		};
+		opp-1633000000 {
+			opp-hz = /bits/ 64 <1633000000>;
+			opp-microvolt = <887500>;
+		};
+		opp-1700000000 {
+			opp-hz = /bits/ 64 <1700000000>;
+			opp-microvolt = <912500>;
+		};
+		opp-1767000000 {
+			opp-hz = /bits/ 64 <1767000000>;
+			opp-microvolt = <937500>;
+		};
+		opp-1834000000 {
+			opp-hz = /bits/ 64 <1834000000>;
+			opp-microvolt = <962500>;
+		};
+		opp-1917000000 {
+			opp-hz = /bits/ 64 <1917000000>;
+			opp-microvolt = <993750>;
+		};
+		opp-2001000000 {
+			opp-hz = /bits/ 64 <2001000000>;
+			opp-microvolt = <1025000>;
+		};
+	};
+
+	clk26m: oscillator {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+		clock-output-names = "clk26m";
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+		bl31_secmon_reserved: secmon@43000000 {
+			no-map;
+			reg = <0 0x43000000 0 0x20000>;
+		};
+	};
+
+	soc {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		ranges;
+
+		gic: interrupt-controller@c000000 {
+			compatible = "arm,gic-v3";
+			#interrupt-cells = <4>;
+			interrupt-parent = <&gic>;
+			interrupt-controller;
+			reg = <0 0x0c000000 0 0x80000>,
+			      <0 0x0c080000 0 0x80000>;
+
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+		};
+
+		topckgen: syscon@10000000 {
+			compatible = "mediatek,mt8365-topckgen", "syscon";
+			reg = <0 0x10000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		infracfg: syscon@10001000 {
+			compatible = "mediatek,mt8365-infracfg", "syscon";
+			reg = <0 0x10001000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pericfg: syscon@10003000 {
+			compatible = "mediatek,mt8365-pericfg", "syscon";
+			reg = <0 0x10003000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		syscfg_pctl: syscfg-pctl@10005000 {
+			compatible = "syscon";
+			reg = <0 0x10005000 0 0x1000>;
+		};
+
+		scpsys: syscon@10006000 {
+			compatible = "syscon", "simple-mfd";
+			reg = <0 0x10006000 0 0x1000>;
+			#power-domain-cells = <1>;
+
+			/* System Power Manager */
+			spm: power-controller {
+				compatible = "mediatek,mt8365-power-controller";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				#power-domain-cells = <1>;
+
+				/* power domains of the SoC */
+				power-domain@MT8365_POWER_DOMAIN_MM {
+					reg = <MT8365_POWER_DOMAIN_MM>;
+					clocks = <&topckgen CLK_TOP_MM_SEL>,
+						 <&mmsys CLK_MM_MM_SMI_COMMON>,
+						 <&mmsys CLK_MM_MM_SMI_COMM0>,
+						 <&mmsys CLK_MM_MM_SMI_COMM1>,
+						 <&mmsys CLK_MM_MM_SMI_LARB0>;
+					clock-names = "mm", "mm-0", "mm-1",
+						      "mm-2", "mm-3";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+					mediatek,infracfg_nao = <&infracfg_nao>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					power-domain@MT8365_POWER_DOMAIN_CAM {
+						reg = <MT8365_POWER_DOMAIN_CAM>;
+						clocks = <&camsys CLK_CAM_LARB2>,
+							 <&camsys CLK_CAM_SENIF>,
+							 <&camsys CLK_CAMSV0>,
+							 <&camsys CLK_CAMSV1>,
+							 <&camsys CLK_CAM_FDVT>,
+							 <&camsys CLK_CAM_WPE>;
+						clock-names = "cam-0", "cam-1",
+							      "cam-2", "cam-3",
+							      "cam-4", "cam-5";
+						#power-domain-cells = <0>;
+						mediatek,infracfg = <&infracfg>;
+						mediatek,smi = <&smi_common>;
+					};
+
+					power-domain@MT8365_POWER_DOMAIN_VDEC {
+						reg = <MT8365_POWER_DOMAIN_VDEC>;
+						#power-domain-cells = <0>;
+						mediatek,smi = <&smi_common>;
+					};
+
+					power-domain@MT8365_POWER_DOMAIN_VENC {
+						reg = <MT8365_POWER_DOMAIN_VENC>;
+						#power-domain-cells = <0>;
+						mediatek,smi = <&smi_common>;
+					};
+
+					power-domain@MT8365_POWER_DOMAIN_APU {
+						reg = <MT8365_POWER_DOMAIN_APU>;
+						clocks = <&infracfg CLK_IFR_APU_AXI>,
+							 <&apu CLK_APU_IPU_CK>,
+							 <&apu CLK_APU_AXI>,
+							 <&apu CLK_APU_JTAG>,
+							 <&apu CLK_APU_IF_CK>,
+							 <&apu CLK_APU_EDMA>,
+							 <&apu CLK_APU_AHB>;
+						clock-names = "apu", "apu-0",
+							      "apu-1", "apu-2",
+							      "apu-3", "apu-4",
+							      "apu-5";
+						#power-domain-cells = <0>;
+						mediatek,infracfg = <&infracfg>;
+						mediatek,smi = <&smi_common>;
+					};
+				};
+
+				power-domain@MT8365_POWER_DOMAIN_CONN {
+					reg = <MT8365_POWER_DOMAIN_CONN>;
+					clocks = <&topckgen CLK_TOP_CONN_32K>,
+						 <&topckgen CLK_TOP_CONN_26M>;
+					clock-names = "conn", "conn1";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT8365_POWER_DOMAIN_MFG {
+					reg = <MT8365_POWER_DOMAIN_MFG>;
+					clocks = <&topckgen CLK_TOP_MFG_SEL>;
+					clock-names = "mfg";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT8365_POWER_DOMAIN_AUDIO {
+					reg = <MT8365_POWER_DOMAIN_AUDIO>;
+					clocks = <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
+						 <&infracfg CLK_IFR_AUDIO>,
+						 <&infracfg CLK_IFR_AUD_26M_BK>;
+					clock-names = "audio", "audio1", "audio2";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+
+				power-domain@MT8365_POWER_DOMAIN_DSP {
+					reg = <MT8365_POWER_DOMAIN_DSP>;
+					clocks = <&topckgen CLK_TOP_DSP_SEL>,
+						 <&topckgen CLK_TOP_DSP_26M>;
+					clock-names = "dsp", "dsp1";
+					#power-domain-cells = <0>;
+					mediatek,infracfg = <&infracfg>;
+				};
+			};
+		};
+
+		watchdog: watchdog@10007000 {
+			compatible = "mediatek,mt8365-wdt",
+				     "mediatek,mt6589-wdt";
+			reg = <0 0x10007000 0 0x100>;
+			#reset-cells = <1>;
+		};
+
+		gpt: apxgpt@10008000 {
+			compatible = "mediatek,mt8365-timer",
+				     "mediatek,mt6577-timer";
+			reg = <0 0x10008000 0 0x1000>;
+			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_SYS_26M_D2>;
+			clock-names = "clk13m";
+		};
+
+		pio: pinctrl@1000b000 {
+			compatible = "mediatek,mt8365-pinctrl";
+			reg = <0 0x1000b000 0 0x1000>;
+			mediatek,pctl-regmap = <&syscfg_pctl>;
+			pins-are-numbered;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		apmixedsys: syscon@1000c000 {
+			compatible = "mediatek,mt8365-apmixedsys", "syscon";
+			reg = <0 0x1000c000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		pwrap: pwrap@1000d000 {
+			compatible = "mediatek,mt8365-pwrap";
+			reg = <0 0x1000d000 0 0x1000>;
+			reg-names = "pwrap";
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_IFR_PWRAP_SPI>,
+				 <&infracfg CLK_IFR_PMIC_AP>,
+				 <&infracfg CLK_IFR_PWRAP_SYS>,
+				 <&infracfg CLK_IFR_PWRAP_TMR>;
+			clock-names = "spi", "wrap", "sys", "tmr";
+		};
+
+		keypad: kp@10010000 {
+			compatible = "mediatek,mt6779-keypad";
+			reg = <0 0x10010000 0 0x1000>;
+			wakeup-source;
+			interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
+			clocks = <&clk26m>;
+			clock-names = "kpd";
+			status = "disabled";
+		};
+
+		mcucfg: syscon@10200000 {
+			compatible = "mediatek,mt8365-mcucfg", "syscon";
+			reg = <0 0x10200000 0 0x2000>;
+			#clock-cells = <1>;
+		};
+
+		sysirq: intpol-controller@10200a80 {
+			compatible = "mediatek,mt8365-sysirq",
+				     "mediatek,mt6577-sysirq";
+			interrupt-controller;
+			#interrupt-cells = <3>;
+			interrupt-parent = <&gic>;
+			reg = <0 0x10200a80 0 0x20>;
+		};
+
+		iommu: iommu@10205000 {
+			compatible = "mediatek,mt8365-m4u";
+			reg = <0 0x10205000 0 0x1000>;
+			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>;
+			#iommu-cells = <1>;
+		};
+
+		infracfg_nao: infracfg-nao@1020e000 {
+			compatible = "syscon";
+			reg = <0 0x1020e000 0 0x1000>;
+		};
+
+		rng: rng@1020f000 {
+			compatible = "mediatek,mt8365-rng",
+				     "mediatek,mt7623-rng";
+			reg = <0 0x1020f000 0 0x100>;
+			clocks = <&infracfg CLK_IFR_TRNG>;
+			clock-names = "rng";
+		};
+
+		apdma: dma-controller@11000280 {
+			compatible = "mediatek,mt8365-uart-dma",
+				     "mediatek,mt6577-uart-dma";
+			reg = <0 0x11000280 0 0x80>,
+			      <0 0x11000300 0 0x80>,
+			      <0 0x11000380 0 0x80>,
+			      <0 0x11000400 0 0x80>,
+			      <0 0x11000580 0 0x80>,
+			      <0 0x11000600 0 0x80>;
+			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+				     <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+			dma-requests = <6>;
+			clocks = <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "apdma";
+			#dma-cells = <1>;
+		};
+
+		auxadc: adc@11001000 {
+			compatible = "mediatek,mt8365-auxadc",
+				     "mediatek,mt8173-auxadc";
+			reg = <0 0x11001000 0 0x1000>;
+			clocks = <&infracfg CLK_IFR_AUXADC>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+		};
+
+		uart0: serial@11002000 {
+			compatible = "mediatek,mt8365-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11002000 0 0x1000>;
+			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 0
+				&apdma 1>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart1: serial@11003000 {
+			compatible = "mediatek,mt8365-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11003000 0 0x1000>;
+			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 2
+				&apdma 3>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		uart2: serial@11004000 {
+			compatible = "mediatek,mt8365-uart",
+				     "mediatek,mt6577-uart";
+			reg = <0 0x11004000 0 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
+			clock-names = "baud", "bus";
+			dmas = <&apdma 4
+				&apdma 5>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		pwm: pwm@11006000 {
+			compatible = "mediatek,mt8365-pwm";
+			reg = <0 0x11006000 0 0x1000>;
+			#pwm-cells = <2>;
+			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_IFR_PWM_HCLK>,
+				 <&infracfg CLK_IFR_PWM>,
+				 <&infracfg CLK_IFR_PWM1>,
+				 <&infracfg CLK_IFR_PWM2>,
+				 <&infracfg CLK_IFR_PWM3>;
+			clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
+		};
+
+		i2c0: i2c@11007000 {
+			compatible = "mediatek,mt8365-i2c",
+				     "mediatek,mt8168-i2c";
+			reg = <0 0x11007000 0 0xa0>,
+			      <0 0x11000080 0 0x80>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C0_AXI>,
+				 <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@11008000 {
+			compatible = "mediatek,mt8365-i2c",
+				     "mediatek,mt8168-i2c";
+			reg = <0 0x11008000 0 0xa0>,
+			      <0 0x11000100 0 0x80>;
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C1_AXI>,
+				 <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@11009000 {
+			compatible = "mediatek,mt8365-i2c",
+				     "mediatek,mt8168-i2c";
+			reg = <0 0x11009000 0 0xa0>,
+			      <0 0x11000180 0 0x80>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C2_AXI>,
+				 <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		spi: spi@1100a000 {
+			compatible = "mediatek,mt8365-spi",
+				     "mediatek,mt7622-spi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0 0x1100a000 0 0x100>;
+			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+				 <&topckgen CLK_TOP_SPI_SEL>,
+				 <&infracfg CLK_IFR_SPI0>;
+			clock-names = "parent-clk", "sel-clk", "spi-clk";
+			status = "disabled";
+		};
+
+		thermal: thermal@1100b000 {
+			compatible = "mediatek,mt8365-thermal";
+			reg = <0 0x1100b000 0 0x1000>;
+			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&infracfg CLK_IFR_THERM>,
+				 <&infracfg CLK_IFR_AUXADC>;
+			clock-names = "therm", "auxadc";
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+			#thermal-sensor-cells = <1>;
+		};
+
+		disp_pwm: disp-pwm@1100e000 {
+			compatible = "mediatek,mt8365-disp-pwm",
+				     "mediatek,mt8183-disp-pwm";
+			reg = <0 0x1100e000 0 0x1000>;
+			#pwm-cells = <2>;
+			clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>,
+				 <&infracfg CLK_IFR_DISP_PWM>;
+			clock-names = "main", "mm";
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@1100f000 {
+			compatible = "mediatek,mt8365-i2c",
+				     "mediatek,mt8168-i2c";
+			reg = <0 0x1100f000 0 0xa0>,
+			      <0 0x11000200 0 0x80>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+			clock-div = <1>;
+			clocks = <&infracfg CLK_IFR_I2C3_AXI>,
+				 <&infracfg CLK_IFR_AP_DMA>;
+			clock-names = "main", "dma";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		ssusb: usb@11201000 {
+			compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
+			reg = <0 0x11201000 0 0x2e00>,
+			      <0 0x11203e00 0 0x0100>;
+			reg-names = "mac", "ippc";
+			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
+			phys = <&u2port0 PHY_TYPE_USB2>,
+			       <&u2port1 PHY_TYPE_USB2>;
+			clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+				 <&infracfg CLK_IFR_SSUSB_REF>,
+				 <&infracfg CLK_IFR_SSUSB_SYS>,
+				 <&infracfg CLK_IFR_ICUSB>;
+			clock-names = "sys_ck", "ref_ck", "mcu_ck",
+				      "dma_ck";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+			status = "disabled";
+
+			usb_host: usb@11200000 {
+				compatible = "mediatek,mt8365-xhci",
+					     "mediatek,mtk-xhci";
+				reg = <0 0x11200000 0 0x1000>;
+				reg-names = "mac";
+				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>;
+				clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+					 <&infracfg CLK_IFR_SSUSB_REF>,
+					 <&infracfg CLK_IFR_SSUSB_SYS>,
+					 <&infracfg CLK_IFR_ICUSB>,
+					 <&infracfg CLK_IFR_SSUSB_XHCI>;
+				clock-names = "sys_ck", "ref_ck", "mcu_ck",
+					      "dma_ck", "xhci_ck";
+				status = "disabled";
+			};
+		};
+
+		mmc0: mmc@11230000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11230000 0 0x1000>,
+			      <0 0x11cd0000 0 0x1000>;
+			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
+				 <&infracfg CLK_IFR_MSDC0_HCLK>,
+				 <&infracfg CLK_IFR_MSDC0_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		mmc1: mmc@11240000 {
+			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+			reg = <0 0x11240000 0 0x1000>,
+			      <0 0x11c90000 0 0x1000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
+			clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
+				 <&infracfg CLK_IFR_MSDC1_HCLK>,
+				 <&infracfg CLK_IFR_MSDC1_SRC>;
+			clock-names = "source", "hclk", "source_cg";
+			status = "disabled";
+		};
+
+		ethernet: ethernet@112a0000 {
+			compatible = "mediatek,mt8365-eth";
+			reg = <0 0x112a0000 0 0x1000>;
+			mediatek,pericfg = <&infracfg>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&topckgen CLK_TOP_ETH_SEL>,
+				 <&infracfg CLK_IFR_NIC_AXI>,
+				 <&infracfg CLK_IFR_NIC_SLV_AXI>;
+			clock-names = "core", "reg", "trans";
+			status = "disabled";
+		};
+
+		mipi_tx0: dsi-phy@11c00000 {
+			compatible = "mediatek,mt8365-mipi-tx",
+				     "mediatek,mt8183-mipi-tx";
+			reg = <0 0x11c00000 0 0x800>;
+			clocks = <&clk26m>;
+			clock-names = "ref_clk";
+			#clock-cells = <0>;
+			#phy-cells = <0>;
+			clock-output-names = "mipi_tx0_pll";
+		};
+
+		efuse: efuse@11c50000 {
+			compatible = "mediatek,mt8365-efuse", "mediatek,efuse";
+			reg = <0 0x11c50000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			thermal_calibration: calib@180 {
+				reg = <0x180 0xc>;
+			};
+		};
+
+		u3phy: t-phy@11cc0000 {
+			compatible = "mediatek,mt8365-tphy",
+				     "mediatek,generic-tphy-v2";
+			#address-cells = <2>;
+			#phy-cells = <1>;
+			#size-cells = <2>;
+			ranges;
+			status = "okay";
+
+			u2port0: usb-phy@11cc0000 {
+				reg = <0 0x11cc0000 0 0x400>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+					 <&topckgen CLK_TOP_USB20_48M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+
+			u2port1: usb-phy@11cc1000 {
+				reg = <0 0x11cc1000 0 0x400>;
+				clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+					 <&topckgen CLK_TOP_USB20_48M_EN>;
+				clock-names = "ref", "da_ref";
+				#phy-cells = <1>;
+				status = "okay";
+			};
+		};
+
+		mfgcfg: syscon@13000000 {
+			compatible = "mediatek,mt8365-mfgcfg", "syscon";
+			reg = <0 0x13000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mmsys: syscon@14000000 {
+			compatible = "mediatek,mt8365-mmsys", "syscon";
+			reg = <0 0x14000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		mutex: mutex@14001000 {
+			compatible =  "mediatek,mt8365-disp-mutex";
+			reg = <0 0x14001000 0 0x1000>;
+			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+		};
+
+		smi_common: smi@14002000 {
+			compatible = "mediatek,mt8365-smi-common",
+				     "mediatek,mt8186-smi-common";
+			reg = <0 0x14002000 0 0x1000>;
+			clocks = <&mmsys CLK_MM_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_MM_SMI_COMMON>,
+				 <&mmsys CLK_MM_MM_SMI_COMM0>,
+				 <&mmsys CLK_MM_MM_SMI_COMM1>;
+			clock-names = "apb", "smi", "gals0", "gals1";
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+		};
+
+		larb0: larb@14003000 {
+			compatible = "mediatek,mt8365-smi-larb",
+				     "mediatek,mt8186-smi-larb";
+			reg = <0 0x14003000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&mmsys CLK_MM_MM_SMI_LARB0>,
+				 <&mmsys CLK_MM_MM_SMI_LARB0>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			mediatek,larb-id = <0>;
+		};
+
+		ovl0: ovl@1400b000 {
+			compatible = "mediatek,mt8365-disp-ovl",
+				     "mediatek,mt8192-disp-ovl";
+			reg = <0 0x1400b000 0 0x1000>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MM_DISP_OVL0>;
+			iommus = <&iommu M4U_PORT_DISP_OVL0>;
+		};
+
+		rdma0: rdma@1400d000 {
+			compatible = "mediatek,mt8365-disp-rdma",
+				     "mediatek,mt8183-disp-rdma";
+			reg = <0 0x1400d000 0 0x1000>;
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MM_DISP_RDMA0>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
+			mediatek,rdma-fifo-size = <5120>;
+		};
+
+		color0: color@1400f000 {
+			compatible = "mediatek,mt8365-disp-color",
+				     "mediatek,mt8173-disp-color";
+			reg = <0 0x1400f000 0 0x1000>;
+			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MM_DISP_COLOR0>;
+		};
+
+		ccorr0: ccorr@14010000 {
+			compatible = "mediatek,mt8365-disp-ccorr",
+				     "mediatek,mt8183-disp-ccorr";
+			reg = <0 0x14010000 0 0x1000>;
+			interrupts = <GIC_SPI 165 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MM_DISP_CCORR0>;
+		};
+
+		aal0: aal@14011000 {
+			compatible = "mediatek,mt8365-disp-aal",
+				     "mediatek,mt8183-disp-aal";
+			reg = <0 0x14011000 0 0x1000>;
+			interrupts = <GIC_SPI 166 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MM_DISP_AAL0>;
+		};
+
+		gamma0: gamma@14012000 {
+			compatible = "mediatek,mt8365-disp-gamma",
+				     "mediatek,mt8183-disp-gamma";
+			reg = <0 0x14012000 0 0x1000>;
+			interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MM_DISP_GAMMA0>;
+		};
+
+		dither0: dither@14013000 {
+			compatible = "mediatek,mt8365-disp-dither",
+				     "mediatek,mt8183-disp-dither";
+			reg = <0 0x14013000 0 0x1000>;
+			interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MM_DISP_DITHER0>;
+		};
+
+		dsi0: dsi@14014000 {
+			compatible = "mediatek,mt8365-dsi",
+				     "mediatek,mt8183-dsi";
+			reg = <0 0x14014000 0 0x1000>;
+			interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MM_DSI0>,
+				 <&mmsys CLK_MM_DSI0_DIG_DSI>,
+				 <&mipi_tx0>;
+			clock-names = "engine", "digital", "hs";
+			phys = <&mipi_tx0>;
+			phy-names = "dphy";
+			status = "disabled";
+		};
+
+		rdma1: rdma@14016000 {
+			compatible = "mediatek,mt8365-disp-rdma",
+				     "mediatek,mt8183-disp-rdma";
+			reg = <0 0x14016000 0 0x1000>;
+			interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			clocks = <&mmsys CLK_MM_MM_DISP_RDMA1>;
+			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
+			mediatek,rdma-fifo-size = <2048>;
+		};
+
+		dpi0: dpi@14018000 {
+			compatible = "mediatek,mt8365-dpi",
+				     "mediatek,mt8192-dpi";
+			reg = <0 0x14018000 0 0x1000>;
+			interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_LOW>;
+			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
+			clocks = <&topckgen CLK_TOP_DPI0_SEL>,
+				 <&mmsys CLK_MM_MM_DPI0>,
+				 <&apmixedsys CLK_APMIXED_LVDSPLL>,
+				 <&mmsys CLK_MM_DPI0_DPI0>;
+			clock-names = "pixel", "engine", "pll", "dpi";
+			status = "disabled";
+		};
+
+		camsys: syscon@15000000 {
+			compatible = "mediatek,mt8365-imgsys", "syscon";
+			reg = <0 0x15000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb2: larb@15001000 {
+			compatible = "mediatek,mt8365-smi-larb",
+				     "mediatek,mt8186-smi-larb";
+			reg = <0 0x15001000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&mmsys CLK_MM_MM_SMI_IMG>,
+				 <&camsys CLK_CAM_LARB2>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8365_POWER_DOMAIN_CAM>;
+			mediatek,larb-id = <2>;
+		};
+
+		vdecsys: syscon@16000000 {
+			compatible = "mediatek,mt8365-vdecsys", "syscon";
+			reg = <0 0x16000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb3: larb@16010000 {
+			compatible = "mediatek,mt8365-smi-larb",
+				     "mediatek,mt8186-smi-larb";
+			reg = <0 0x16010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vdecsys CLK_VDEC_LARB1>,
+				 <&vdecsys CLK_VDEC_LARB1>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8365_POWER_DOMAIN_VDEC>;
+			mediatek,larb-id = <3>;
+		};
+
+		vencsys: syscon@17000000 {
+			compatible = "mediatek,mt8365-vencsys", "syscon";
+			reg = <0 0x17000000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		larb1: larb@17010000 {
+			compatible = "mediatek,mt8365-smi-larb",
+				     "mediatek,mt8186-smi-larb";
+			reg = <0 0x17010000 0 0x1000>;
+			mediatek,smi = <&smi_common>;
+			clocks = <&vencsys CLK_VENC>, <&vencsys CLK_VENC>;
+			clock-names = "apb", "smi";
+			power-domains = <&spm MT8365_POWER_DOMAIN_VENC>;
+			mediatek,larb-id = <1>;
+		};
+
+		apu: syscon@19020000 {
+			compatible = "mediatek,mt8365-apu", "syscon";
+			reg = <0 0x19020000 0 0x1000>;
+			#clock-cells = <1>;
+		};
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&thermal 0>;
+
+			trips {
+				threshold: trip-point0 {
+					temperature = <95000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				target: trip-point1 {
+					temperature = <105000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				cpu_crit: cpu_crit0 {
+					temperature = <117000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device =
+						<&cpu0
+						 THERMAL_NO_LIMIT
+						 THERMAL_NO_LIMIT>,
+						<&cpu1
+						 THERMAL_NO_LIMIT
+						 THERMAL_NO_LIMIT>,
+						<&cpu2
+						 THERMAL_NO_LIMIT
+						 THERMAL_NO_LIMIT>,
+						<&cpu3
+						 THERMAL_NO_LIMIT
+						 THERMAL_NO_LIMIT>;
+					contribution = <100>;
+				};
+			};
+		};
+
+		tzts1: tzts1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 1>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts2: tzts2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 2>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts3: tzts3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 3>;
+			trips {};
+			cooling-maps {};
+		};
+
+		tzts4: tzts4-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 4>;
+			trips {};
+			cooling-maps {};
+		};
+	};
+
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+	};
+};
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (15 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree Fabien Parent
@ 2022-05-31 13:50 ` Fabien Parent
  2022-06-01 10:41   ` Krzysztof Kozlowski
  2022-06-01  9:32 ` [PATCH 00/17] Add support for MT8365 EVK board Krzysztof Kozlowski
  2022-06-07 10:46 ` (subset) " Mark Brown
  18 siblings, 1 reply; 44+ messages in thread
From: Fabien Parent @ 2022-05-31 13:50 UTC (permalink / raw)
  To: robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg,
	jic23, chaotian.jing, ulf.hansson, srinivas.kandagatla,
	chunfeng.yun, broonie, wim, linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Fabien Parent

Add device-tree for the MT8365-EVK board. The MT8365 EVK board
has the following IOs:
* DPI <-> HDMI bridge and HDMI connector.
* 2 audio jack
* 1 USB Type-A Host port
* 2 UART to USB port
* 1 battery connector
* 1 eMMC
* 1 SD card
* 2 camera connectors
* 1 M.2 slot for connectivity
* 1 DSI connector + touchscreen connector
* RPI compatible header
* 1 Ethernet port

Signed-off-by: Fabien Parent <fparent@baylibre.com>
---
 arch/arm64/boot/dts/mediatek/Makefile       |   1 +
 arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 578 ++++++++++++++++++++
 2 files changed, 579 insertions(+)
 create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts

diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index c7d4636a2cb7..02a9f784358e 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -40,4 +40,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
 dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
new file mode 100644
index 000000000000..8f472caa06a3
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -0,0 +1,578 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021 BayLibre, SAS.
+ * Author: Fabien Parent <fparent@baylibre.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
+#include "mt8365.dtsi"
+#include "mt6357.dtsi"
+
+/ {
+	model = "MediaTek MT8365 Open Platform EVK";
+	compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:921600n8";
+	};
+
+	connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "a";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&hdmi_connector_out>;
+			};
+		};
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		input-name = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&gpio_keys>;
+
+		volume-up {
+			gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+			wakeup-source;
+			debounce-interval = <15>;
+		};
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0 0x40000000 0 0xc0000000>;
+	};
+
+	usb_otg_vbus: regulator-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "otg_vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* 12 MiB reserved for OP-TEE (BL32)
+		 * +-----------------------+ 0x43e0_0000
+		 * |      SHMEM 2MiB       |
+		 * +-----------------------+ 0x43c0_0000
+		 * |        | TA_RAM  8MiB |
+		 * + TZDRAM +--------------+ 0x4340_0000
+		 * |        | TEE_RAM 2MiB |
+		 * +-----------------------+ 0x4320_0000
+		 */
+		optee_reserved: optee@43200000 {
+			no-map;
+			reg = <0 0x43200000 0 0x00c00000>;
+		};
+	};
+};
+
+&cpu0 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu1 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu2 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&cpu3 {
+	proc-supply = <&mt6357_vproc_reg>;
+	sram-supply = <&mt6357_vsram_proc_reg>;
+};
+
+&dpi0 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&dpi_func_pins>;
+	pinctrl-1 = <&dpi_idle_pins>;
+	assigned-clocks = <&topckgen CLK_TOP_DPI0_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_LVDSPLL_D4>;
+
+	/*
+	 * Ethernet and HDMI are sharing pins.
+	 * Only one can be enabled at a time and require the physical switch
+	 * SW2101 to be set on DPI position
+	 */
+	status = "okay";
+
+	port {
+		dpi_out: endpoint {
+			remote-endpoint = <&it66121_in>;
+		};
+	};
+};
+
+&ethernet {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ethernet_pins>;
+	phy-handle = <&eth_phy>;
+	phy-mode = "rmii";
+	mac-address = [00 00 00 00 00 00];
+
+	/*
+	 * Ethernet and HDMI are sharing pins.
+	 * Only one can be enabled at a time and require the physical switch
+	 * SW2101 to be set on LAN position
+	 */
+	status = "disabled";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		eth_phy: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1_pins>;
+	clock-frequency = <100000>;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	it66121hdmitx: hdmi@4c {
+		compatible = "ite,it66121";
+		pinctrl-names = "default";
+		pinctrl-0 = <&ite_pins>;
+		vcn33-supply = <&mt6357_vibr_reg>;
+		vcn18-supply = <&mt6357_vsim2_reg>;
+		vrf12-supply = <&mt6357_vrf12_reg>;
+		reset-gpios = <&pio 69 GPIO_ACTIVE_LOW>;
+		interrupts-extended = <&pio 68 IRQ_TYPE_LEVEL_LOW>;
+		#sound-dai-cells = <0>;
+		reg = <0x4c>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				it66121_in: endpoint {
+					bus-width = <12>;
+					remote-endpoint = <&dpi_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hdmi_connector_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&mmc0 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc0_pins_default>;
+	pinctrl-1 = <&mmc0_pins_uhs>;
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	cap-mmc-hw-reset;
+	no-sdio;
+	no-sd;
+	hs400-ds-delay = <0x12012>;
+	vmmc-supply = <&mt6357_vemc_reg>;
+	vqmmc-supply = <&mt6357_vio18_reg>;
+	assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
+	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>;
+	non-removable;
+};
+
+&mmc1 {
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc1_pins_default>;
+	pinctrl-1 = <&mmc1_pins_uhs>;
+	cd-gpios = <&pio 76 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&mt6357_vmch_reg>;
+	vqmmc-supply = <&mt6357_vio18_reg>;
+	status = "okay";
+};
+
+&mt6357_pmic {
+	interrupt-parent = <&pio>;
+	interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
+	interrupt-controller;
+	#interrupt-cells = <2>;
+};
+
+&mt6357_vibr_reg {
+	regulator-always-on;
+};
+
+/* Needed by MSDC1 */
+&mt6357_vmc_reg {
+	regulator-always-on;
+};
+
+&mt6357_vrf12_reg {
+	regulator-always-on;
+};
+
+&mt6357_vsim2_reg {
+	regulator-always-on;
+};
+
+&mt6357keys {
+	power-key {
+		label = "power";
+		linux,keycodes = <KEY_POWER>;
+		wakeup-source;
+	};
+
+	volume-down {
+		label = "volume_down";
+		linux,keycodes = <KEY_VOLUMEDOWN>;
+		wakeup-source;
+	};
+};
+
+&pio {
+	dpi_func_pins: dpi-func-pins {
+		pins {
+			pinmux = <MT8365_PIN_0_GPIO0__FUNC_DPI_D0>,
+				 <MT8365_PIN_1_GPIO1__FUNC_DPI_D1>,
+				 <MT8365_PIN_2_GPIO2__FUNC_DPI_D2>,
+				 <MT8365_PIN_3_GPIO3__FUNC_DPI_D3>,
+				 <MT8365_PIN_4_GPIO4__FUNC_DPI_D4>,
+				 <MT8365_PIN_5_GPIO5__FUNC_DPI_D5>,
+				 <MT8365_PIN_6_GPIO6__FUNC_DPI_D6>,
+				 <MT8365_PIN_7_GPIO7__FUNC_DPI_D7>,
+				 <MT8365_PIN_8_GPIO8__FUNC_DPI_D8>,
+				 <MT8365_PIN_9_GPIO9__FUNC_DPI_D9>,
+				 <MT8365_PIN_10_GPIO10__FUNC_DPI_D10>,
+				 <MT8365_PIN_11_GPIO11__FUNC_DPI_D11>,
+				 <MT8365_PIN_12_GPIO12__FUNC_DPI_DE>,
+				 <MT8365_PIN_13_GPIO13__FUNC_DPI_VSYNC>,
+				 <MT8365_PIN_14_GPIO14__FUNC_DPI_CK>,
+				 <MT8365_PIN_15_GPIO15__FUNC_DPI_HSYNC>;
+			drive-strength = <MTK_DRIVE_4mA>;
+		};
+	};
+
+	dpi_idle_pins: dpi-idle-pins {
+		pins {
+			pinmux = <MT8365_PIN_0_GPIO0__FUNC_GPIO0>,
+				 <MT8365_PIN_1_GPIO1__FUNC_GPIO1>,
+				 <MT8365_PIN_2_GPIO2__FUNC_GPIO2>,
+				 <MT8365_PIN_3_GPIO3__FUNC_GPIO3>,
+				 <MT8365_PIN_4_GPIO4__FUNC_GPIO4>,
+				 <MT8365_PIN_5_GPIO5__FUNC_GPIO5>,
+				 <MT8365_PIN_6_GPIO6__FUNC_GPIO6>,
+				 <MT8365_PIN_7_GPIO7__FUNC_GPIO7>,
+				 <MT8365_PIN_8_GPIO8__FUNC_GPIO8>,
+				 <MT8365_PIN_9_GPIO9__FUNC_GPIO9>,
+				 <MT8365_PIN_10_GPIO10__FUNC_GPIO10>,
+				 <MT8365_PIN_11_GPIO11__FUNC_GPIO11>,
+				 <MT8365_PIN_12_GPIO12__FUNC_GPIO12>,
+				 <MT8365_PIN_13_GPIO13__FUNC_GPIO13>,
+				 <MT8365_PIN_14_GPIO14__FUNC_GPIO14>,
+				 <MT8365_PIN_15_GPIO15__FUNC_GPIO15>;
+		};
+	};
+
+	ethernet_pins: ethernet-pins {
+		pins-ethernet {
+			pinmux = <MT8365_PIN_0_GPIO0__FUNC_EXT_TXD0>,
+				 <MT8365_PIN_1_GPIO1__FUNC_EXT_TXD1>,
+				 <MT8365_PIN_2_GPIO2__FUNC_EXT_TXD2>,
+				 <MT8365_PIN_3_GPIO3__FUNC_EXT_TXD3>,
+				 <MT8365_PIN_4_GPIO4__FUNC_EXT_TXC>,
+				 <MT8365_PIN_5_GPIO5__FUNC_EXT_RXER>,
+				 <MT8365_PIN_6_GPIO6__FUNC_EXT_RXC>,
+				 <MT8365_PIN_7_GPIO7__FUNC_EXT_RXDV>,
+				 <MT8365_PIN_8_GPIO8__FUNC_EXT_RXD0>,
+				 <MT8365_PIN_9_GPIO9__FUNC_EXT_RXD1>,
+				 <MT8365_PIN_10_GPIO10__FUNC_EXT_RXD2>,
+				 <MT8365_PIN_11_GPIO11__FUNC_EXT_RXD3>,
+				 <MT8365_PIN_12_GPIO12__FUNC_EXT_TXEN>,
+				 <MT8365_PIN_13_GPIO13__FUNC_EXT_COL>,
+				 <MT8365_PIN_14_GPIO14__FUNC_EXT_MDIO>,
+				 <MT8365_PIN_15_GPIO15__FUNC_EXT_MDC>;
+		};
+
+		pins-phy-reset {
+			pinmux = <MT8365_PIN_133_TDM_TX_DATA1__FUNC_GPIO133>;
+		};
+	};
+
+	gpio_keys: gpio-keys-pins {
+		pins {
+			pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
+	i2c1_pins: i2c1-pins {
+		pins {
+			pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>,
+				 <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
+			mediatek,pull-up-adv = <3>;
+			mediatek,drive-strength-adv = <00>;
+			bias-pull-up;
+		};
+	};
+
+	ite_pins: ite-pins {
+		pins-rst-ite {
+			pinmux = <MT8365_PIN_69_CMDAT1__FUNC_GPIO69>;
+			output-high;
+		};
+
+		pins-irq-ite {
+			pinmux = <MT8365_PIN_68_CMDAT0__FUNC_GPIO68>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-pwr {
+			pinmux = <MT8365_PIN_70_CMDAT2__FUNC_GPIO70>,
+				 <MT8365_PIN_71_CMDAT3__FUNC_GPIO71>;
+			output-high;
+		};
+	};
+
+	mmc0_pins_default: mmc0-default-pins {
+		pins-clk {
+			pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			bias-pull-down;
+		};
+
+		pins-cmd-dat {
+			pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-rst {
+			pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+			bias-pull-up;
+		};
+	};
+
+	mmc0_pins_uhs: mmc0-uhs-pins {
+		pins-clk {
+			pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+				 <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+				 <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+				 <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+				 <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+				 <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+				 <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+				 <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+				 <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-ds {
+			pinmux = <MT8365_PIN_104_MSDC0_DSL__FUNC_MSDC0_DSL>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-rst {
+			pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+			drive-strength = <MTK_DRIVE_10mA>;
+			bias-pull-up;
+		};
+	};
+
+	mmc1_pins_default: mmc1-default-pins {
+		pins-cd {
+			pinmux = <MT8365_PIN_76_CMDAT8__FUNC_GPIO76>;
+			bias-pull-up;
+		};
+
+		pins-clk {
+			pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	mmc1_pins_uhs: mmc1-uhs-pins {
+		pins-clk {
+			pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins-cmd-dat {
+			pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+				 <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+				 <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+				 <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+				 <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_6mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+	};
+
+	uart0_pins: uart0-pins {
+		pins {
+			pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
+				 <MT8365_PIN_36_UTXD0__FUNC_UTXD0>;
+		};
+	};
+
+	uart1_pins: uart1-pins {
+		pins {
+			pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>,
+				 <MT8365_PIN_38_UTXD1__FUNC_UTXD1>;
+		};
+	};
+
+	uart2_pins: uart2-pins {
+		pins {
+			pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>,
+				 <MT8365_PIN_40_UTXD2__FUNC_UTXD2>;
+		};
+	};
+
+	usb_pins: usb-pins {
+		pins-id {
+			pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>;
+			input-enable;
+			bias-pull-up;
+		};
+
+		pins-usb0-vbus {
+			pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>;
+			output-high;
+		};
+
+		pin-usb1-vbus {
+			pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>;
+			output-high;
+		};
+	};
+
+	pwm_pins: pwm-pins {
+		pins {
+			pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>,
+				 <MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>;
+		};
+	};
+};
+
+&pwm {
+	pinctrl-0 = <&pwm_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&ssusb {
+	pinctrl-0 = <&usb_pins>;
+	pinctrl-names = "default";
+	maximum-speed = "high-speed";
+	usb-role-switch;
+	dr_mode = "otg";
+	vusb33-supply = <&mt6357_vusb33_reg>;
+	status = "okay";
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		type = "micro";
+		id-gpios = <&pio 17 GPIO_ACTIVE_HIGH>;
+		vbus-supply = <&usb_otg_vbus>;
+	};
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_host {
+	vusb33-supply = <&mt6357_vusb33_reg>;
+	status = "okay";
+};
-- 
2.36.1


^ permalink raw reply related	[flat|nested] 44+ messages in thread

* Re: [PATCH 00/17] Add support for MT8365 EVK board
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (16 preceding siblings ...)
  2022-05-31 13:50 ` [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree Fabien Parent
@ 2022-06-01  9:32 ` Krzysztof Kozlowski
  2022-06-07 10:46 ` (subset) " Mark Brown
  18 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01  9:32 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> This patch series adds support for the MT8365 EVK board.
> 
> This series has dependencies on the following series:
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646256
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646091
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646083
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646081
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646076
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646068
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646020
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646052
> https://lore.kernel.org/r/20220504091923.2219-2-rex-bc.chen@mediatek.com 
> https://lore.kernel.org/r/20220512062622.31484-2-chunfeng.yun@mediatek.com 
> https://lore.kernel.org/r/20220512062622.31484-1-chunfeng.yun@mediatek.com
> https://lore.kernel.org/r/20220524115019.97246-1-angelogioacchino.delregno@collabora.com
> https://lore.kernel.org/all/20220127015857.9868-1-biao.huang@mediatek.com/

Eh... and how we are supposed to test or apply this? Such dependencies
could mean none of automated tools will pick it up, so your patchset has
to wait till dependencies got merged.


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 02/17] dt-bindings: memory: add mt8365 SoC binding documentation
  2022-05-31 13:50 ` [PATCH 02/17] dt-bindings: memory: add mt8365 SoC binding documentation Fabien Parent
@ 2022-06-01  9:34   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01  9:34 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux, Yong Wu
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add MediaTek SMI bindings for MT8365 SoC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  .../bindings/memory-controllers/mediatek,smi-common.yaml    | 6 ++++++
>  .../bindings/memory-controllers/mediatek,smi-larb.yaml      | 6 ++++++
>  2 files changed, 12 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> index a98b359bf909..e1029ac99ab4 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-common.yaml
> @@ -46,6 +46,11 @@ properties:
>            - const: mediatek,mt7623-smi-common
>            - const: mediatek,mt2701-smi-common
>  
> +      - description: for mt8365

Skip description and:

> +        items:
> +          - const: mediatek,mt8365-smi-common

This should be rather enum. I see existing code did that way, but this
way makes it bloated. If new device compatible with mt8186 comes, should
be added to this enum, not to new items.

> +          - const: mediatek,mt8186-smi-common
> +
>    reg:
>      maxItems: 1
>  
> @@ -130,6 +135,7 @@ allOf:
>              - mediatek,mt8192-smi-common
>              - mediatek,mt8195-smi-common-vdo
>              - mediatek,mt8195-smi-common-vpp
> +            - mediatek,mt8365-smi-common
>  
>      then:
>        properties:
> diff --git a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> index c886681f62a7..815d87fc64a0 100644
> --- a/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> +++ b/Documentation/devicetree/bindings/memory-controllers/mediatek,smi-larb.yaml
> @@ -32,6 +32,11 @@ properties:
>            - const: mediatek,mt7623-smi-larb
>            - const: mediatek,mt2701-smi-larb
>  
> +      - description: for mt8365
> +        items:
> +          - const: mediatek,mt8365-smi-larb
> +          - const: mediatek,mt8186-smi-larb

Ditto.

> +
>    reg:
>      maxItems: 1
>  
> @@ -78,6 +83,7 @@ allOf:
>              - mediatek,mt8183-smi-larb
>              - mediatek,mt8186-smi-larb
>              - mediatek,mt8195-smi-larb
> +            - mediatek,mt8365-smi-larb
>  
>      then:
>        properties:


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC
  2022-05-31 13:50 ` [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC Fabien Parent
@ 2022-06-01  9:34   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01  9:34 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog, Rob Herring

On 31/05/2022 15:50, Fabien Parent wrote:
> Add binding documentation for the MT8365 I2C controllers.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> Acked-by: Rob Herring <robh@kernel.org>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
> index 16a1a3118204..a6fe0d8b0cbe 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mt65xx.yaml
> @@ -43,6 +43,10 @@ properties:
>            - enum:
>                - mediatek,mt8195-i2c
>            - const: mediatek,mt8192-i2c
> +      - items:
> +          - enum:
> +              - mediatek,mt8365-i2c
> +          - const: mediatek,mt8168-i2c

Order entries by last item, so this goes before mt8192

>  
>    reg:
>      items:


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 03/17] dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC
  2022-05-31 13:50 ` [PATCH 03/17] dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC Fabien Parent
@ 2022-06-01  9:35   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01  9:35 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux,
	Wenbin Mei
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add MMC bindings for MT8365 bindings.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  Documentation/devicetree/bindings/mmc/mtk-sd.yaml | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> index 2a2e9fa8c188..3195b80ef057 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.yaml
> @@ -38,6 +38,9 @@ properties:
>        - items:
>            - const: mediatek,mt8195-mmc
>            - const: mediatek,mt8183-mmc
> +      - items:
> +          - const: mediatek,mt8365-mmc

You code it so inconsistently... It's one patchset but each patch doing
the same thing differently.

Please put it under enum in entry above.


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board
  2022-05-31 13:50 ` [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board Fabien Parent
@ 2022-06-01  9:36   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01  9:36 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux,
	Sean Wang
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add binding documentation for the MT8365-EVK board. The MT8365 EVK board
> has the following IOs:
> * DPI <-> HDMI bridge and HDMI connector.
> * 2 audio jack
> * 1 USB Type-A Host port
> * 2 UART to USB port
> * 1 battery connector
> * 1 eMMC
> * 1 SD card
> * 2 camera connectors
> * 1 M.2 slot for connectivity
> * 1 DSI connector + touchscreen connector
> * RPI compatible header
> * 1 Ethernet port
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  Documentation/devicetree/bindings/arm/mediatek.yaml | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
> index 4a2bd9759c47..a4b1288fa837 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek.yaml
> +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
> @@ -216,6 +216,10 @@ properties:
>            - enum:
>                - mediatek,mt8516-pumpkin
>            - const: mediatek,mt8516

Blank line here

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

> +      - items:
> +          - enum:
> +              - mediatek,mt8365-evk
> +          - const: mediatek,mt8365
>  
>  additionalProperties: true
>  


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings
  2022-05-31 13:50 ` [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings Fabien Parent
@ 2022-06-01  9:36   ` Krzysztof Kozlowski
  2022-06-09  5:56   ` Vinod Koul
  1 sibling, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01  9:36 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux,
	Long Cheng
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add binding documentation in order to support the MT8365 SoC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml | 1 +
>  1 file changed, 1 insertion(+)


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings
  2022-05-31 13:50 ` [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings Fabien Parent
@ 2022-06-01 10:01   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01 10:01 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux,
	Lars-Peter Clausen, Zhiyong Tao
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add binding for the ADC present in MT8365 SoC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  .../devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml      | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
> index 65581ad4b816..364a23be73bc 100644
> --- a/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/mediatek,mt2701-auxadc.yaml
> @@ -37,6 +37,7 @@ properties:
>                - mediatek,mt8186-auxadc
>                - mediatek,mt8195-auxadc
>                - mediatek,mt8516-auxadc
> +              - mediatek,mt8365-auxadc

Alphabetical order.

Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings
  2022-05-31 13:50 ` [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings Fabien Parent
@ 2022-06-01 10:01   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01 10:01 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux,
	Andrew-CT Chen, Lala Lin
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add bindings documentation for the efuse driver on MT8365 SoC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
> index 7c7233e29ecf..444875264493 100644
> --- a/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
> +++ b/Documentation/devicetree/bindings/nvmem/mediatek,efuse.yaml
> @@ -32,6 +32,7 @@ properties:
>                - mediatek,mt8192-efuse
>                - mediatek,mt8195-efuse
>                - mediatek,mt8516-efuse
> +              - mediatek,mt8365-efuse

Order please


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 09/17] dt-bindings: spi: mt65xx: add MT8365 SoC bindings
  2022-05-31 13:50 ` [PATCH 09/17] dt-bindings: spi: mt65xx: add " Fabien Parent
@ 2022-06-01 10:02   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01 10:02 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux,
	Leilk Liu
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add binding documentation for the MT8365 SoC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings
  2022-05-31 13:50 ` [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings Fabien Parent
@ 2022-06-01 10:03   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01 10:03 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add binding documentation for the MT8365 SoC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  Documentation/devicetree/bindings/watchdog/mtk-wdt.txt | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> index a97418c74f6b..0e63c4ba3785 100644
> --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> @@ -19,6 +19,7 @@ Required properties:
>  	"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
>  	"mediatek,mt8192-wdt": for MT8192
>  	"mediatek,mt8195-wdt", "mediatek,mt6589-wdt": for MT8195
> +	"mediatek,mt8365-wdt", "mediatek,mt6589-wdt": for MT8365

Just for curiosity - how does this (and previous binding patches) depend
on your big list:
"This series has dependencies on the following series:"
?

>  
>  - reg : Specifies base physical address and size of the registers.
>  


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 10/17] dt-bindings: serial: mediatek: add MT8365 bindings
  2022-05-31 13:50 ` [PATCH 10/17] dt-bindings: serial: mediatek: add MT8365 bindings Fabien Parent
@ 2022-06-01 10:12   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01 10:12 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux,
	Greg Kroah-Hartman
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add binding documentation for the MT8365 SoC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  Documentation/devicetree/bindings/serial/mediatek,uart.yaml | 1 +
>  1 file changed, 1 insertion(+)


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  2022-05-31 13:50 ` [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings Fabien Parent
@ 2022-06-01 10:13   ` Krzysztof Kozlowski
  2022-06-09  5:58   ` Vinod Koul
  1 sibling, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01 10:13 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux,
	Kishon Vijay Abraham I, Chun-Kuang Hu, Philipp Zabel
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add binding documentation for the MT8365 SoC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml | 4 ++++
>  1 file changed, 4 insertions(+)


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 12/17] dt-bindings: phy: mediatek,tphy: add MT8365 SoC bindings
  2022-05-31 13:50 ` [PATCH 12/17] dt-bindings: phy: mediatek,tphy: add " Fabien Parent
@ 2022-06-01 10:13   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01 10:13 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux,
	Kishon Vijay Abraham I
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add binding documentation for the MT8365 SoC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: add MT8365 SoC bindings
  2022-05-31 13:50 ` [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: " Fabien Parent
@ 2022-06-01 10:14   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01 10:14 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux,
	Greg Kroah-Hartman
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add binding documentation for the MT8365 SoC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: add MT8365 SoC bindings
  2022-05-31 13:50 ` [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: " Fabien Parent
@ 2022-06-01 10:14   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01 10:14 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux,
	Greg Kroah-Hartman
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add binding documentation for the MT8365 SoC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---


Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree
  2022-05-31 13:50 ` [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree Fabien Parent
@ 2022-06-01 10:15   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01 10:15 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add device-tree for the MT6357 PMIC.
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt6357.dtsi | 272 +++++++++++++++++++++++
>  1 file changed, 272 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt6357.dtsi
> 
(...)

> +
> +		mt6357rtc: mt6357rtc {

Generic node names, so "rtc".

> +			compatible = "mediatek,mt6357-rtc",
> +				     "mediatek,mt6358-rtc";
> +		};
> +
> +		mt6357keys: mt6357keys {

Generic node names.

> +			compatible = "mediatek,mt6357-keys";
> +		};
> +	};
> +};


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  2022-05-31 13:50 ` [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree Fabien Parent
@ 2022-06-01 10:37   ` Krzysztof Kozlowski
  2022-09-22  2:49     ` Chunfeng Yun
  2022-09-22  2:54     ` Chunfeng Yun
  2022-07-20 13:12   ` Amjad Ouled-Ameur
  2022-07-26  9:57   ` Amjad Ouled-Ameur
  2 siblings, 2 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01 10:37 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add device-tree for the MT8365 SoC. More information can be found
> about that SoC at the following address:
> https://www.mediatek.com/products/aiot/i350-mt8365
> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8365.dtsi | 1047 ++++++++++++++++++++++
>  1 file changed, 1047 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> new file mode 100644
> index 000000000000..e22b1d259418
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> @@ -0,0 +1,1047 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * Copyright (c) 2018 MediaTek Inc.
> + */
> +
> +#include <dt-bindings/clock/mediatek,mt8365-clk.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/power/mt8365-power.h>
> +#include <dt-bindings/memory/mt8365-larb-port.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> +	compatible = "mediatek,mt8365";
> +	interrupt-parent = <&sysirq>;
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	aliases {
> +		ovl0 = &ovl0;
> +		rdma0 = &rdma0;
> +		rdma1 = &rdma1;
> +		color0 = &color0;
> +		ccorr0 = &ccorr0;
> +		aal0 = &aal0;
> +		gamma0 = &gamma0;
> +		dither0 = &dither0;
> +		dsi0 = &dsi0;
> +		dpi0 = &dpi0;
> +	};
> +
> +	cpus: cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0: cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +				core1 {
> +					cpu = <&cpu1>;
> +				};
> +				core2 {
> +					cpu = <&cpu2>;
> +				};
> +				core3 {
> +					cpu = <&cpu3>;
> +				};
> +			};
> +		};
> +
> +		cpu0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x0>;
> +			clock-frequency = <1600000000>;
> +			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> +				 <&apmixedsys CLK_APMIXED_MAINPLL>;
> +			clock-names = "cpu", "intermediate";
> +			operating-points-v2 = <&cluster0_opp>;
> +			#cooling-cells = <2>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu1: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x1>;
> +			clock-frequency = <1600000000>;
> +			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> +				 <&apmixedsys CLK_APMIXED_MAINPLL>;
> +			clock-names = "cpu", "intermediate", "armpll";
> +			operating-points-v2 = <&cluster0_opp>;
> +			#cooling-cells = <2>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu2: cpu@2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x2>;
> +			clock-frequency = <1600000000>;
> +			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> +				 <&apmixedsys CLK_APMIXED_MAINPLL>;
> +			clock-names = "cpu", "intermediate", "armpll";
> +			operating-points-v2 = <&cluster0_opp>;
> +			#cooling-cells = <2>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu3: cpu@3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x3>;
> +			clock-frequency = <1600000000>;
> +			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> +				 <&apmixedsys CLK_APMIXED_MAINPLL>;
> +			clock-names = "cpu", "intermediate", "armpll";
> +			operating-points-v2 = <&cluster0_opp>;
> +			#cooling-cells = <2>;
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	cluster0_opp: opp-table-0 {
> +		compatible = "operating-points-v2";
> +		opp-shared;
> +		opp-850000000 {
> +			opp-hz = /bits/ 64 <850000000>;
> +			opp-microvolt = <650000>;
> +		};
> +		opp-918000000 {
> +			opp-hz = /bits/ 64 <918000000>;
> +			opp-microvolt = <668750>;
> +		};
> +		opp-987000000 {
> +			opp-hz = /bits/ 64 <987000000>;
> +			opp-microvolt = <687500>;
> +		};
> +		opp-1056000000 {
> +			opp-hz = /bits/ 64 <1056000000>;
> +			opp-microvolt = <706250>;
> +		};
> +		opp-1125000000 {
> +			opp-hz = /bits/ 64 <1125000000>;
> +			opp-microvolt = <725000>;
> +		};
> +		opp-1216000000 {
> +			opp-hz = /bits/ 64 <1216000000>;
> +			opp-microvolt = <750000>;
> +		};
> +		opp-1308000000 {
> +			opp-hz = /bits/ 64 <1308000000>;
> +			opp-microvolt = <775000>;
> +		};
> +		opp-1400000000 {
> +			opp-hz = /bits/ 64 <1400000000>;
> +			opp-microvolt = <800000>;
> +		};
> +		opp-1466000000 {
> +			opp-hz = /bits/ 64 <1466000000>;
> +			opp-microvolt = <825000>;
> +		};
> +		opp-1533000000 {
> +			opp-hz = /bits/ 64 <1533000000>;
> +			opp-microvolt = <850000>;
> +		};
> +		opp-1633000000 {
> +			opp-hz = /bits/ 64 <1633000000>;
> +			opp-microvolt = <887500>;
> +		};
> +		opp-1700000000 {
> +			opp-hz = /bits/ 64 <1700000000>;
> +			opp-microvolt = <912500>;
> +		};
> +		opp-1767000000 {
> +			opp-hz = /bits/ 64 <1767000000>;
> +			opp-microvolt = <937500>;
> +		};
> +		opp-1834000000 {
> +			opp-hz = /bits/ 64 <1834000000>;
> +			opp-microvolt = <962500>;
> +		};
> +		opp-1917000000 {
> +			opp-hz = /bits/ 64 <1917000000>;
> +			opp-microvolt = <993750>;
> +		};
> +		opp-2001000000 {
> +			opp-hz = /bits/ 64 <2001000000>;
> +			opp-microvolt = <1025000>;
> +		};
> +	};
> +
> +	clk26m: oscillator {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <26000000>;

This does not look like property of a SoC. Are you sure MT8365 SoC has
this clock (not the board)?

> +		clock-output-names = "clk26m";
> +	};
> +
> +	psci {
> +		compatible = "arm,psci-1.0";
> +		method = "smc";
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
> +		bl31_secmon_reserved: secmon@43000000 {
> +			no-map;
> +			reg = <0 0x43000000 0 0x20000>;
> +		};
> +	};
> +
> +	soc {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		compatible = "simple-bus";
> +		ranges;
> +
> +		gic: interrupt-controller@c000000 {
> +			compatible = "arm,gic-v3";
> +			#interrupt-cells = <4>;

Why do you have four cells here (and passing 0 as interrupt)?

> +			interrupt-parent = <&gic>;
> +			interrupt-controller;
> +			reg = <0 0x0c000000 0 0x80000>,
> +			      <0 0x0c080000 0 0x80000>;
> +
> +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> +		};
> +
> +		topckgen: syscon@10000000 {
> +			compatible = "mediatek,mt8365-topckgen", "syscon";
> +			reg = <0 0x10000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		infracfg: syscon@10001000 {
> +			compatible = "mediatek,mt8365-infracfg", "syscon";
> +			reg = <0 0x10001000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		pericfg: syscon@10003000 {
> +			compatible = "mediatek,mt8365-pericfg", "syscon";
> +			reg = <0 0x10003000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		syscfg_pctl: syscfg-pctl@10005000 {

This is I guess also syscon, like other nodes?

> +			compatible = "syscon";

You need specific compatible. Please run `make dtbs_check` and fix the
errors.

> +			reg = <0 0x10005000 0 0x1000>;
> +		};
> +
> +		scpsys: syscon@10006000 {
> +			compatible = "syscon", "simple-mfd";

You need specific compatible.

> +			reg = <0 0x10006000 0 0x1000>;
> +			#power-domain-cells = <1>;

This is definitely wrong now. It's not a simple-mfd device, so please do
not use that property.

> +
> +			/* System Power Manager */
> +			spm: power-controller {
> +				compatible = "mediatek,mt8365-power-controller";
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				#power-domain-cells = <1>;
> +
> +				/* power domains of the SoC */

The comment suggests you will later add here power domains not for the
SoC. If that's not true, just skip the comment.

> +				power-domain@MT8365_POWER_DOMAIN_MM {
> +					reg = <MT8365_POWER_DOMAIN_MM>;
> +					clocks = <&topckgen CLK_TOP_MM_SEL>,
> +						 <&mmsys CLK_MM_MM_SMI_COMMON>,
> +						 <&mmsys CLK_MM_MM_SMI_COMM0>,
> +						 <&mmsys CLK_MM_MM_SMI_COMM1>,
> +						 <&mmsys CLK_MM_MM_SMI_LARB0>;
> +					clock-names = "mm", "mm-0", "mm-1",
> +						      "mm-2", "mm-3";
> +					#power-domain-cells = <0>;
> +					mediatek,infracfg = <&infracfg>;
> +					mediatek,infracfg_nao = <&infracfg_nao>;
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +
> +					power-domain@MT8365_POWER_DOMAIN_CAM {
> +						reg = <MT8365_POWER_DOMAIN_CAM>;
> +						clocks = <&camsys CLK_CAM_LARB2>,
> +							 <&camsys CLK_CAM_SENIF>,
> +							 <&camsys CLK_CAMSV0>,
> +							 <&camsys CLK_CAMSV1>,
> +							 <&camsys CLK_CAM_FDVT>,
> +							 <&camsys CLK_CAM_WPE>;
> +						clock-names = "cam-0", "cam-1",
> +							      "cam-2", "cam-3",
> +							      "cam-4", "cam-5";
> +						#power-domain-cells = <0>;
> +						mediatek,infracfg = <&infracfg>;
> +						mediatek,smi = <&smi_common>;
> +					};
> +
> +					power-domain@MT8365_POWER_DOMAIN_VDEC {
> +						reg = <MT8365_POWER_DOMAIN_VDEC>;
> +						#power-domain-cells = <0>;
> +						mediatek,smi = <&smi_common>;
> +					};
> +
> +					power-domain@MT8365_POWER_DOMAIN_VENC {
> +						reg = <MT8365_POWER_DOMAIN_VENC>;
> +						#power-domain-cells = <0>;
> +						mediatek,smi = <&smi_common>;
> +					};
> +
> +					power-domain@MT8365_POWER_DOMAIN_APU {
> +						reg = <MT8365_POWER_DOMAIN_APU>;
> +						clocks = <&infracfg CLK_IFR_APU_AXI>,
> +							 <&apu CLK_APU_IPU_CK>,
> +							 <&apu CLK_APU_AXI>,
> +							 <&apu CLK_APU_JTAG>,
> +							 <&apu CLK_APU_IF_CK>,
> +							 <&apu CLK_APU_EDMA>,
> +							 <&apu CLK_APU_AHB>;
> +						clock-names = "apu", "apu-0",
> +							      "apu-1", "apu-2",
> +							      "apu-3", "apu-4",
> +							      "apu-5";
> +						#power-domain-cells = <0>;
> +						mediatek,infracfg = <&infracfg>;
> +						mediatek,smi = <&smi_common>;
> +					};
> +				};
> +
> +				power-domain@MT8365_POWER_DOMAIN_CONN {
> +					reg = <MT8365_POWER_DOMAIN_CONN>;
> +					clocks = <&topckgen CLK_TOP_CONN_32K>,
> +						 <&topckgen CLK_TOP_CONN_26M>;
> +					clock-names = "conn", "conn1";
> +					#power-domain-cells = <0>;
> +					mediatek,infracfg = <&infracfg>;
> +				};
> +
> +				power-domain@MT8365_POWER_DOMAIN_MFG {
> +					reg = <MT8365_POWER_DOMAIN_MFG>;
> +					clocks = <&topckgen CLK_TOP_MFG_SEL>;
> +					clock-names = "mfg";
> +					#power-domain-cells = <0>;
> +					mediatek,infracfg = <&infracfg>;
> +				};
> +
> +				power-domain@MT8365_POWER_DOMAIN_AUDIO {
> +					reg = <MT8365_POWER_DOMAIN_AUDIO>;
> +					clocks = <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
> +						 <&infracfg CLK_IFR_AUDIO>,
> +						 <&infracfg CLK_IFR_AUD_26M_BK>;
> +					clock-names = "audio", "audio1", "audio2";
> +					#power-domain-cells = <0>;
> +					mediatek,infracfg = <&infracfg>;
> +				};
> +
> +				power-domain@MT8365_POWER_DOMAIN_DSP {
> +					reg = <MT8365_POWER_DOMAIN_DSP>;
> +					clocks = <&topckgen CLK_TOP_DSP_SEL>,
> +						 <&topckgen CLK_TOP_DSP_26M>;
> +					clock-names = "dsp", "dsp1";
> +					#power-domain-cells = <0>;
> +					mediatek,infracfg = <&infracfg>;
> +				};
> +			};
> +		};
> +
> +		watchdog: watchdog@10007000 {
> +			compatible = "mediatek,mt8365-wdt",
> +				     "mediatek,mt6589-wdt";
> +			reg = <0 0x10007000 0 0x100>;
> +			#reset-cells = <1>;
> +		};
> +
> +		gpt: apxgpt@10008000 {

Generic node names, so "timer"

> +			compatible = "mediatek,mt8365-timer",
> +				     "mediatek,mt6577-timer";
> +			reg = <0 0x10008000 0 0x1000>;
> +			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&topckgen CLK_TOP_SYS_26M_D2>;
> +			clock-names = "clk13m";
> +		};
> +
> +		pio: pinctrl@1000b000 {
> +			compatible = "mediatek,mt8365-pinctrl";
> +			reg = <0 0x1000b000 0 0x1000>;
> +			mediatek,pctl-regmap = <&syscfg_pctl>;
> +			pins-are-numbered;
> +			gpio-controller;
> +			#gpio-cells = <2>;
> +			interrupt-controller;
> +			#interrupt-cells = <2>;
> +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> +		};
> +
> +		apmixedsys: syscon@1000c000 {
> +			compatible = "mediatek,mt8365-apmixedsys", "syscon";
> +			reg = <0 0x1000c000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		pwrap: pwrap@1000d000 {
> +			compatible = "mediatek,mt8365-pwrap";
> +			reg = <0 0x1000d000 0 0x1000>;
> +			reg-names = "pwrap";
> +			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&infracfg CLK_IFR_PWRAP_SPI>,
> +				 <&infracfg CLK_IFR_PMIC_AP>,
> +				 <&infracfg CLK_IFR_PWRAP_SYS>,
> +				 <&infracfg CLK_IFR_PWRAP_TMR>;
> +			clock-names = "spi", "wrap", "sys", "tmr";
> +		};
> +
> +		keypad: kp@10010000 {

s/kp/keypad/

> +			compatible = "mediatek,mt6779-keypad";
> +			reg = <0 0x10010000 0 0x1000>;
> +			wakeup-source;
> +			interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
> +			clocks = <&clk26m>;
> +			clock-names = "kpd";
> +			status = "disabled";
> +		};
> +
> +		mcucfg: syscon@10200000 {
> +			compatible = "mediatek,mt8365-mcucfg", "syscon";
> +			reg = <0 0x10200000 0 0x2000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		sysirq: intpol-controller@10200a80 {

interrupt-controller

> +			compatible = "mediatek,mt8365-sysirq",
> +				     "mediatek,mt6577-sysirq";
> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			interrupt-parent = <&gic>;
> +			reg = <0 0x10200a80 0 0x20>;
> +		};
> +
> +		iommu: iommu@10205000 {
> +			compatible = "mediatek,mt8365-m4u";
> +			reg = <0 0x10205000 0 0x1000>;
> +			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_LOW>;
> +			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>, <&larb3>;
> +			#iommu-cells = <1>;
> +		};
> +
> +		infracfg_nao: infracfg-nao@1020e000 {

Other nodes are named syscon

> +			compatible = "syscon";

No, syscon cannot be alone.

> +			reg = <0 0x1020e000 0 0x1000>;
> +		};
> +
> +		rng: rng@1020f000 {
> +			compatible = "mediatek,mt8365-rng",
> +				     "mediatek,mt7623-rng";
> +			reg = <0 0x1020f000 0 0x100>;
> +			clocks = <&infracfg CLK_IFR_TRNG>;
> +			clock-names = "rng";
> +		};
> +
> +		apdma: dma-controller@11000280 {
> +			compatible = "mediatek,mt8365-uart-dma",
> +				     "mediatek,mt6577-uart-dma";
> +			reg = <0 0x11000280 0 0x80>,
> +			      <0 0x11000300 0 0x80>,
> +			      <0 0x11000380 0 0x80>,
> +			      <0 0x11000400 0 0x80>,
> +			      <0 0x11000580 0 0x80>,
> +			      <0 0x11000600 0 0x80>;
> +			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
> +				     <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
> +				     <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
> +				     <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
> +				     <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
> +				     <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
> +			dma-requests = <6>;
> +			clocks = <&infracfg CLK_IFR_AP_DMA>;
> +			clock-names = "apdma";
> +			#dma-cells = <1>;
> +		};
> +
> +		auxadc: adc@11001000 {
> +			compatible = "mediatek,mt8365-auxadc",
> +				     "mediatek,mt8173-auxadc";
> +			reg = <0 0x11001000 0 0x1000>;
> +			clocks = <&infracfg CLK_IFR_AUXADC>;
> +			clock-names = "main";
> +			#io-channel-cells = <1>;
> +		};
> +
> +		uart0: serial@11002000 {
> +			compatible = "mediatek,mt8365-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11002000 0 0x1000>;
> +			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
> +			clock-names = "baud", "bus";
> +			dmas = <&apdma 0
> +				&apdma 1>;

You need to split these into two phandles.

> +			dma-names = "tx", "rx";
> +			status = "disabled";
> +		};
> +
> +		uart1: serial@11003000 {
> +			compatible = "mediatek,mt8365-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11003000 0 0x1000>;
> +			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
> +			clock-names = "baud", "bus";
> +			dmas = <&apdma 2
> +				&apdma 3>;

Ditto.

> +			dma-names = "tx", "rx";
> +			status = "disabled";
> +		};
> +
> +		uart2: serial@11004000 {
> +			compatible = "mediatek,mt8365-uart",
> +				     "mediatek,mt6577-uart";
> +			reg = <0 0x11004000 0 0x1000>;
> +			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
> +			clock-names = "baud", "bus";
> +			dmas = <&apdma 4
> +				&apdma 5>;
> +			dma-names = "tx", "rx";
> +			status = "disabled";
> +		};
> +
> +		pwm: pwm@11006000 {
> +			compatible = "mediatek,mt8365-pwm";
> +			reg = <0 0x11006000 0 0x1000>;
> +			#pwm-cells = <2>;
> +			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&infracfg CLK_IFR_PWM_HCLK>,
> +				 <&infracfg CLK_IFR_PWM>,
> +				 <&infracfg CLK_IFR_PWM1>,
> +				 <&infracfg CLK_IFR_PWM2>,
> +				 <&infracfg CLK_IFR_PWM3>;
> +			clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
> +		};
> +
> +		i2c0: i2c@11007000 {
> +			compatible = "mediatek,mt8365-i2c",
> +				     "mediatek,mt8168-i2c";
> +			reg = <0 0x11007000 0 0xa0>,
> +			      <0 0x11000080 0 0x80>;
> +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
> +			clock-div = <1>;
> +			clocks = <&infracfg CLK_IFR_I2C0_AXI>,
> +				 <&infracfg CLK_IFR_AP_DMA>;
> +			clock-names = "main", "dma";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2c1: i2c@11008000 {
> +			compatible = "mediatek,mt8365-i2c",
> +				     "mediatek,mt8168-i2c";
> +			reg = <0 0x11008000 0 0xa0>,
> +			      <0 0x11000100 0 0x80>;
> +			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
> +			clock-div = <1>;
> +			clocks = <&infracfg CLK_IFR_I2C1_AXI>,
> +				 <&infracfg CLK_IFR_AP_DMA>;
> +			clock-names = "main", "dma";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		i2c2: i2c@11009000 {
> +			compatible = "mediatek,mt8365-i2c",
> +				     "mediatek,mt8168-i2c";
> +			reg = <0 0x11009000 0 0xa0>,
> +			      <0 0x11000180 0 0x80>;
> +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
> +			clock-div = <1>;
> +			clocks = <&infracfg CLK_IFR_I2C2_AXI>,
> +				 <&infracfg CLK_IFR_AP_DMA>;
> +			clock-names = "main", "dma";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		spi: spi@1100a000 {
> +			compatible = "mediatek,mt8365-spi",
> +				     "mediatek,mt7622-spi";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0 0x1100a000 0 0x100>;

Reg goes after compatible.

> +			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
> +				 <&topckgen CLK_TOP_SPI_SEL>,
> +				 <&infracfg CLK_IFR_SPI0>;
> +			clock-names = "parent-clk", "sel-clk", "spi-clk";
> +			status = "disabled";
> +		};
> +
> +		thermal: thermal@1100b000 {
> +			compatible = "mediatek,mt8365-thermal";
> +			reg = <0 0x1100b000 0 0x1000>;
> +			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&infracfg CLK_IFR_THERM>,
> +				 <&infracfg CLK_IFR_AUXADC>;
> +			clock-names = "therm", "auxadc";
> +			mediatek,auxadc = <&auxadc>;
> +			mediatek,apmixedsys = <&apmixedsys>;
> +			nvmem-cells = <&thermal_calibration>;
> +			nvmem-cell-names = "calibration-data";
> +			#thermal-sensor-cells = <1>;
> +		};
> +
> +		disp_pwm: disp-pwm@1100e000 {

Generic node names, so "pwm"

> +			compatible = "mediatek,mt8365-disp-pwm",
> +				     "mediatek,mt8183-disp-pwm";
> +			reg = <0 0x1100e000 0 0x1000>;
> +			#pwm-cells = <2>;
> +			clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>,
> +				 <&infracfg CLK_IFR_DISP_PWM>;
> +			clock-names = "main", "mm";
> +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> +			status = "disabled";
> +		};
> +
> +		i2c3: i2c@1100f000 {
> +			compatible = "mediatek,mt8365-i2c",
> +				     "mediatek,mt8168-i2c";
> +			reg = <0 0x1100f000 0 0xa0>,
> +			      <0 0x11000200 0 0x80>;
> +			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
> +			clock-div = <1>;
> +			clocks = <&infracfg CLK_IFR_I2C3_AXI>,
> +				 <&infracfg CLK_IFR_AP_DMA>;
> +			clock-names = "main", "dma";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			status = "disabled";
> +		};
> +
> +		ssusb: usb@11201000 {
> +			compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
> +			reg = <0 0x11201000 0 0x2e00>,
> +			      <0 0x11203e00 0 0x0100>;
> +			reg-names = "mac", "ippc";
> +			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
> +			phys = <&u2port0 PHY_TYPE_USB2>,
> +			       <&u2port1 PHY_TYPE_USB2>;
> +			clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
> +				 <&infracfg CLK_IFR_SSUSB_REF>,
> +				 <&infracfg CLK_IFR_SSUSB_SYS>,
> +				 <&infracfg CLK_IFR_ICUSB>;
> +			clock-names = "sys_ck", "ref_ck", "mcu_ck",
> +				      "dma_ck";
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +			ranges;
> +			status = "disabled";
> +
> +			usb_host: usb@11200000 {
> +				compatible = "mediatek,mt8365-xhci",
> +					     "mediatek,mtk-xhci";
> +				reg = <0 0x11200000 0 0x1000>;
> +				reg-names = "mac";
> +				interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>;
> +				clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
> +					 <&infracfg CLK_IFR_SSUSB_REF>,
> +					 <&infracfg CLK_IFR_SSUSB_SYS>,
> +					 <&infracfg CLK_IFR_ICUSB>,
> +					 <&infracfg CLK_IFR_SSUSB_XHCI>;
> +				clock-names = "sys_ck", "ref_ck", "mcu_ck",
> +					      "dma_ck", "xhci_ck";
> +				status = "disabled";
> +			};
> +		};
> +
> +		mmc0: mmc@11230000 {
> +			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
> +			reg = <0 0x11230000 0 0x1000>,
> +			      <0 0x11cd0000 0 0x1000>;
> +			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
> +				 <&infracfg CLK_IFR_MSDC0_HCLK>,
> +				 <&infracfg CLK_IFR_MSDC0_SRC>;
> +			clock-names = "source", "hclk", "source_cg";
> +			status = "disabled";
> +		};
> +
> +		mmc1: mmc@11240000 {
> +			compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
> +			reg = <0 0x11240000 0 0x1000>,
> +			      <0 0x11c90000 0 0x1000>;
> +			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
> +			clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
> +				 <&infracfg CLK_IFR_MSDC1_HCLK>,
> +				 <&infracfg CLK_IFR_MSDC1_SRC>;
> +			clock-names = "source", "hclk", "source_cg";
> +			status = "disabled";
> +		};
> +
> +		ethernet: ethernet@112a0000 {
> +			compatible = "mediatek,mt8365-eth";
> +			reg = <0 0x112a0000 0 0x1000>;
> +			mediatek,pericfg = <&infracfg>;
> +			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&topckgen CLK_TOP_ETH_SEL>,
> +				 <&infracfg CLK_IFR_NIC_AXI>,
> +				 <&infracfg CLK_IFR_NIC_SLV_AXI>;
> +			clock-names = "core", "reg", "trans";
> +			status = "disabled";
> +		};
> +
> +		mipi_tx0: dsi-phy@11c00000 {
> +			compatible = "mediatek,mt8365-mipi-tx",
> +				     "mediatek,mt8183-mipi-tx";
> +			reg = <0 0x11c00000 0 0x800>;
> +			clocks = <&clk26m>;
> +			clock-names = "ref_clk";
> +			#clock-cells = <0>;
> +			#phy-cells = <0>;
> +			clock-output-names = "mipi_tx0_pll";
> +		};
> +
> +		efuse: efuse@11c50000 {
> +			compatible = "mediatek,mt8365-efuse", "mediatek,efuse";
> +			reg = <0 0x11c50000 0 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +
> +			thermal_calibration: calib@180 {
> +				reg = <0x180 0xc>;
> +			};
> +		};
> +
> +		u3phy: t-phy@11cc0000 {

s/t-phy/phy/

> +			compatible = "mediatek,mt8365-tphy",
> +				     "mediatek,generic-tphy-v2";
> +			#address-cells = <2>;
> +			#phy-cells = <1>;

address-cells, then size, then phy

> +			#size-cells = <2>;
> +			ranges;
> +			status = "okay";

No need for status ok.

> +
> +			u2port0: usb-phy@11cc0000 {
> +				reg = <0 0x11cc0000 0 0x400>;
> +				clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
> +					 <&topckgen CLK_TOP_USB20_48M_EN>;
> +				clock-names = "ref", "da_ref";
> +				#phy-cells = <1>;
> +				status = "okay";

Ditto

> +			};
> +
> +			u2port1: usb-phy@11cc1000 {
> +				reg = <0 0x11cc1000 0 0x400>;
> +				clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
> +					 <&topckgen CLK_TOP_USB20_48M_EN>;
> +				clock-names = "ref", "da_ref";
> +				#phy-cells = <1>;
> +				status = "okay";
> +			};
> +		};
> +
> +		mfgcfg: syscon@13000000 {
> +			compatible = "mediatek,mt8365-mfgcfg", "syscon";
> +			reg = <0 0x13000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		mmsys: syscon@14000000 {
> +			compatible = "mediatek,mt8365-mmsys", "syscon";
> +			reg = <0 0x14000000 0 0x1000>;
> +			#clock-cells = <1>;
> +		};
> +
> +		mutex: mutex@14001000 {
> +			compatible =  "mediatek,mt8365-disp-mutex";
> +			reg = <0 0x14001000 0 0x1000>;
> +			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
> +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> +		};
> +
> +		smi_common: smi@14002000 {

s/smi/memory-controller/ in node name?

> +			compatible = "mediatek,mt8365-smi-common",
> +				     "mediatek,mt8186-smi-common";
> +			reg = <0 0x14002000 0 0x1000>;
> +			clocks = <&mmsys CLK_MM_MM_SMI_COMMON>,
> +				 <&mmsys CLK_MM_MM_SMI_COMMON>,
> +				 <&mmsys CLK_MM_MM_SMI_COMM0>,
> +				 <&mmsys CLK_MM_MM_SMI_COMM1>;
> +			clock-names = "apb", "smi", "gals0", "gals1";
> +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> +		};
> +
> +		larb0: larb@14003000 {

The same?

> +			compatible = "mediatek,mt8365-smi-larb",
> +				     "mediatek,mt8186-smi-larb";
> +			reg = <0 0x14003000 0 0x1000>;
> +			mediatek,smi = <&smi_common>;
> +			clocks = <&mmsys CLK_MM_MM_SMI_LARB0>,
> +				 <&mmsys CLK_MM_MM_SMI_LARB0>;
> +			clock-names = "apb", "smi";
> +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;



Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree
  2022-05-31 13:50 ` [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree Fabien Parent
@ 2022-06-01 10:41   ` Krzysztof Kozlowski
  0 siblings, 0 replies; 44+ messages in thread
From: Krzysztof Kozlowski @ 2022-06-01 10:41 UTC (permalink / raw)
  To: Fabien Parent, robh+dt, krzysztof.kozlowski+dt, vkoul, qii.wang,
	matthias.bgg, jic23, chaotian.jing, ulf.hansson,
	srinivas.kandagatla, chunfeng.yun, broonie, wim, linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On 31/05/2022 15:50, Fabien Parent wrote:
> Add device-tree for the MT8365-EVK board. The MT8365 EVK board
> has the following IOs:
> * DPI <-> HDMI bridge and HDMI connector.
> * 2 audio jack
> * 1 USB Type-A Host port
> * 2 UART to USB port
> * 1 battery connector
> * 1 eMMC
> * 1 SD card
> * 2 camera connectors
> * 1 M.2 slot for connectivity
> * 1 DSI connector + touchscreen connector
> * RPI compatible header
> * 1 Ethernet port

Thank you for your patch. There is something to discuss/improve.

> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  arch/arm64/boot/dts/mediatek/Makefile       |   1 +
>  arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 578 ++++++++++++++++++++
>  2 files changed, 579 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> 
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index c7d4636a2cb7..02a9f784358e 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -40,4 +40,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8183-pumpkin.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8192-evb.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
>  dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> new file mode 100644
> index 000000000000..8f472caa06a3
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> @@ -0,0 +1,578 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2021 BayLibre, SAS.
> + * Author: Fabien Parent <fparent@baylibre.com>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
> +#include "mt8365.dtsi"
> +#include "mt6357.dtsi"
> +
> +/ {
> +	model = "MediaTek MT8365 Open Platform EVK";
> +	compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
> +
> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:921600n8";
> +	};
> +
> +	connector {
> +		compatible = "hdmi-connector";
> +		label = "hdmi";
> +		type = "a";
> +
> +		port {
> +			hdmi_connector_in: endpoint {
> +				remote-endpoint = <&hdmi_connector_out>;
> +			};
> +		};
> +	};
> +
> +	firmware {
> +		optee {
> +			compatible = "linaro,optee-tz";
> +			method = "smc";
> +		};
> +	};
> +
> +	gpio-keys {
> +		compatible = "gpio-keys";
> +		input-name = "gpio-keys";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&gpio_keys>;
> +
> +		volume-up {

key-volume-up, volume-up-key or key-0

> +			gpios = <&pio 24 GPIO_ACTIVE_LOW>;
> +			label = "volume_up";
> +			linux,code = <KEY_VOLUMEUP>;
> +			wakeup-source;
> +			debounce-interval = <15>;
> +		};
> +	};
> +
> +	memory@40000000 {
> +		device_type = "memory";
> +		reg = <0 0x40000000 0 0xc0000000>;
> +	};
> +
> +	usb_otg_vbus: regulator-2 {
> +		compatible = "regulator-fixed";
> +		regulator-name = "otg_vbus";
> +		regulator-min-microvolt = <5000000>;
> +		regulator-max-microvolt = <5000000>;
> +		gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
> +		enable-active-high;
> +	};
> +
> +	reserved-memory {
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		/* 12 MiB reserved for OP-TEE (BL32)
> +		 * +-----------------------+ 0x43e0_0000
> +		 * |      SHMEM 2MiB       |
> +		 * +-----------------------+ 0x43c0_0000
> +		 * |        | TA_RAM  8MiB |
> +		 * + TZDRAM +--------------+ 0x4340_0000
> +		 * |        | TEE_RAM 2MiB |
> +		 * +-----------------------+ 0x4320_0000
> +		 */
> +		optee_reserved: optee@43200000 {
> +			no-map;
> +			reg = <0 0x43200000 0 0x00c00000>;
> +		};
> +	};
> +};
> +
> +&cpu0 {
> +	proc-supply = <&mt6357_vproc_reg>;
> +	sram-supply = <&mt6357_vsram_proc_reg>;
> +};
> +
> +&cpu1 {
> +	proc-supply = <&mt6357_vproc_reg>;
> +	sram-supply = <&mt6357_vsram_proc_reg>;
> +};
> +
> +&cpu2 {
> +	proc-supply = <&mt6357_vproc_reg>;
> +	sram-supply = <&mt6357_vsram_proc_reg>;
> +};
> +
> +&cpu3 {
> +	proc-supply = <&mt6357_vproc_reg>;
> +	sram-supply = <&mt6357_vsram_proc_reg>;
> +};
> +
> +&dpi0 {
> +	pinctrl-names = "default", "sleep";
> +	pinctrl-0 = <&dpi_func_pins>;
> +	pinctrl-1 = <&dpi_idle_pins>;
> +	assigned-clocks = <&topckgen CLK_TOP_DPI0_SEL>;
> +	assigned-clock-parents = <&topckgen CLK_TOP_LVDSPLL_D4>;
> +
> +	/*
> +	 * Ethernet and HDMI are sharing pins.
> +	 * Only one can be enabled at a time and require the physical switch
> +	 * SW2101 to be set on DPI position
> +	 */
> +	status = "okay";
> +
> +	port {
> +		dpi_out: endpoint {
> +			remote-endpoint = <&it66121_in>;
> +		};
> +	};
> +};
> +
> +&ethernet {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&ethernet_pins>;
> +	phy-handle = <&eth_phy>;
> +	phy-mode = "rmii";
> +	mac-address = [00 00 00 00 00 00];
> +
> +	/*
> +	 * Ethernet and HDMI are sharing pins.
> +	 * Only one can be enabled at a time and require the physical switch
> +	 * SW2101 to be set on LAN position
> +	 */
> +	status = "disabled";
> +
> +	mdio {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		eth_phy: ethernet-phy@0 {
> +			reg = <0>;
> +		};
> +	};
> +};
> +
> +&i2c1 {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&i2c1_pins>;
> +	clock-frequency = <100000>;
> +	status = "okay";
> +	#address-cells = <1>;
> +	#size-cells = <0>;

You defined address/size in DTSI.

> +
> +	it66121hdmitx: hdmi@4c {
> +		compatible = "ite,it66121";
> +		pinctrl-names = "default";
> +		pinctrl-0 = <&ite_pins>;
> +		vcn33-supply = <&mt6357_vibr_reg>;
> +		vcn18-supply = <&mt6357_vsim2_reg>;
> +		vrf12-supply = <&mt6357_vrf12_reg>;
> +		reset-gpios = <&pio 69 GPIO_ACTIVE_LOW>;
> +		interrupts-extended = <&pio 68 IRQ_TYPE_LEVEL_LOW>;
> +		#sound-dai-cells = <0>;
> +		reg = <0x4c>;

Put reg after compatible.

> +
> +		ports {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			port@0 {
> +				reg = <0>;
> +
> +				it66121_in: endpoint {
> +					bus-width = <12>;
> +					remote-endpoint = <&dpi_out>;
> +				};
> +			};
> +
> +			port@1 {
> +				reg = <1>;
> +
> +				hdmi_connector_out: endpoint {
> +					remote-endpoint = <&hdmi_connector_in>;
> +				};
> +			};
> +		};
> +	};
> +};
> +
> +&mmc0 {
> +	status = "okay";

Status okay goes to the end. In some nodes you keep that style, in some
not. Confusing.

> +	pinctrl-names = "default", "state_uhs";
> +	pinctrl-0 = <&mmc0_pins_default>;
> +	pinctrl-1 = <&mmc0_pins_uhs>;
> +	bus-width = <8>;
> +	max-frequency = <200000000>;
> +	cap-mmc-highspeed;
> +	mmc-hs200-1_8v;
> +	mmc-hs400-1_8v;
> +	cap-mmc-hw-reset;
> +	no-sdio;
> +	no-sd;
> +	hs400-ds-delay = <0x12012>;
> +	vmmc-supply = <&mt6357_vemc_reg>;
> +	vqmmc-supply = <&mt6357_vio18_reg>;
> +	assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
> +	assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL>;
> +	non-removable;
> +};
> +
> +&mmc1 {
> +	pinctrl-names = "default", "state_uhs";
> +	pinctrl-0 = <&mmc1_pins_default>;
> +	pinctrl-1 = <&mmc1_pins_uhs>;
> +	cd-gpios = <&pio 76 GPIO_ACTIVE_LOW>;
> +	bus-width = <4>;
> +	max-frequency = <200000000>;
> +	cap-sd-highspeed;
> +	sd-uhs-sdr50;
> +	sd-uhs-sdr104;
> +	vmmc-supply = <&mt6357_vmch_reg>;
> +	vqmmc-supply = <&mt6357_vio18_reg>;
> +	status = "okay";
> +};
> +
> +&mt6357_pmic {
> +	interrupt-parent = <&pio>;
> +	interrupts = <145 IRQ_TYPE_LEVEL_HIGH>;
> +	interrupt-controller;
> +	#interrupt-cells = <2>;
> +};
> +
> +&mt6357_vibr_reg {
> +	regulator-always-on;
> +};
> +
> +/* Needed by MSDC1 */
> +&mt6357_vmc_reg {
> +	regulator-always-on;
> +};
> +
> +&mt6357_vrf12_reg {
> +	regulator-always-on;
> +};
> +
> +&mt6357_vsim2_reg {
> +	regulator-always-on;
> +};
> +
> +&mt6357keys {
> +	power-key {
> +		label = "power";
> +		linux,keycodes = <KEY_POWER>;
> +		wakeup-source;
> +	};
> +
> +	volume-down {

volume-down-key

> +		label = "volume_down";
> +		linux,keycodes = <KEY_VOLUMEDOWN>;


Best regards,
Krzysztof

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: (subset) [PATCH 00/17] Add support for MT8365 EVK board
  2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
                   ` (17 preceding siblings ...)
  2022-06-01  9:32 ` [PATCH 00/17] Add support for MT8365 EVK board Krzysztof Kozlowski
@ 2022-06-07 10:46 ` Mark Brown
  18 siblings, 0 replies; 44+ messages in thread
From: Mark Brown @ 2022-06-07 10:46 UTC (permalink / raw)
  To: linux, robh+dt, vkoul, matthias.bgg, jic23, srinivas.kandagatla,
	krzysztof.kozlowski+dt, chunfeng.yun, fparent, ulf.hansson, wim,
	qii.wang, chaotian.jing
  Cc: linux-watchdog, devicetree, linux-kernel, linux-usb, linux-phy,
	linux-arm-kernel, dmaengine, linux-mmc, linux-spi, linux-iio,
	linux-i2c, linux-serial, linux-mediatek

On Tue, 31 May 2022 15:50:09 +0200, Fabien Parent wrote:
> This patch series adds support for the MT8365 EVK board.
> 
> This series has dependencies on the following series:
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646256
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646091
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646083
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646081
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646076
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646068
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646020
> https://patchwork.kernel.org/project/linux-mediatek/list/?series=646052
> https://lore.kernel.org/r/20220504091923.2219-2-rex-bc.chen@mediatek.com
> https://lore.kernel.org/r/20220512062622.31484-2-chunfeng.yun@mediatek.com
> https://lore.kernel.org/r/20220512062622.31484-1-chunfeng.yun@mediatek.com
> https://lore.kernel.org/r/20220524115019.97246-1-angelogioacchino.delregno@collabora.com
> https://lore.kernel.org/all/20220127015857.9868-1-biao.huang@mediatek.com/
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git for-next

Thanks!

[09/17] dt-bindings: spi: mt65xx: add MT8365 SoC bindings
        commit: 901fc8e8079e401f3240006cab6629e65579701c

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings
  2022-05-31 13:50 ` [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings Fabien Parent
  2022-06-01  9:36   ` Krzysztof Kozlowski
@ 2022-06-09  5:56   ` Vinod Koul
  1 sibling, 0 replies; 44+ messages in thread
From: Vinod Koul @ 2022-06-09  5:56 UTC (permalink / raw)
  To: Fabien Parent
  Cc: robh+dt, krzysztof.kozlowski+dt, qii.wang, matthias.bgg, jic23,
	chaotian.jing, ulf.hansson, srinivas.kandagatla, chunfeng.yun,
	broonie, wim, linux, Long Cheng, devicetree, linux-kernel,
	dmaengine, linux-i2c, linux-arm-kernel, linux-mediatek,
	linux-iio, linux-mmc, linux-phy, linux-serial, linux-spi,
	linux-usb, linux-watchdog

On 31-05-22, 15:50, Fabien Parent wrote:
> Add binding documentation in order to support the MT8365 SoC.

Applied to dmaengine-next, thanks

> 
> Signed-off-by: Fabien Parent <fparent@baylibre.com>
> ---
>  Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
> index 54d68fc688b5..19ea8dcbcbce 100644
> --- a/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
> +++ b/Documentation/devicetree/bindings/dma/mediatek,uart-dma.yaml
> @@ -22,6 +22,7 @@ properties:
>        - items:
>            - enum:
>                - mediatek,mt2712-uart-dma
> +              - mediatek,mt8365-uart-dma
>                - mediatek,mt8516-uart-dma
>            - const: mediatek,mt6577-uart-dma
>        - enum:
> -- 
> 2.36.1

-- 
~Vinod

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings
  2022-05-31 13:50 ` [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings Fabien Parent
  2022-06-01 10:13   ` Krzysztof Kozlowski
@ 2022-06-09  5:58   ` Vinod Koul
  1 sibling, 0 replies; 44+ messages in thread
From: Vinod Koul @ 2022-06-09  5:58 UTC (permalink / raw)
  To: Fabien Parent
  Cc: robh+dt, krzysztof.kozlowski+dt, qii.wang, matthias.bgg, jic23,
	chaotian.jing, ulf.hansson, srinivas.kandagatla, chunfeng.yun,
	broonie, wim, linux, Kishon Vijay Abraham I, Chun-Kuang Hu,
	Philipp Zabel, devicetree, linux-kernel, dmaengine, linux-i2c,
	linux-arm-kernel, linux-mediatek, linux-iio, linux-mmc,
	linux-phy, linux-serial, linux-spi, linux-usb, linux-watchdog

On 31-05-22, 15:50, Fabien Parent wrote:
> Add binding documentation for the MT8365 SoC.

Applied 11, 12 to phy-next, thanks

-- 
~Vinod

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  2022-05-31 13:50 ` [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree Fabien Parent
  2022-06-01 10:37   ` Krzysztof Kozlowski
@ 2022-07-20 13:12   ` Amjad Ouled-Ameur
  2022-09-14 13:27     ` Amjad Ouled-Ameur
  2022-07-26  9:57   ` Amjad Ouled-Ameur
  2 siblings, 1 reply; 44+ messages in thread
From: Amjad Ouled-Ameur @ 2022-07-20 13:12 UTC (permalink / raw)
  To: fparent
  Cc: broonie, chaotian.jing, chunfeng.yun, devicetree, dmaengine,
	jic23, krzysztof.kozlowski+dt, linux-arm-kernel, linux-i2c,
	linux-iio, linux-kernel, linux-mediatek, linux-mmc, linux-phy,
	linux-serial, linux-spi, linux-usb, linux-watchdog, linux,
	matthias.bgg, qii.wang, robh+dt, srinivas.kandagatla,
	ulf.hansson, vkoul, wim

Hi Fabien,

> +		tzts4: tzts4-thermal {
> +			polling-delay-passive = <0>;
> +			polling-delay = <0>;
> +			thermal-sensors = <&thermal 4>;
> +			trips {};
> +			cooling-maps {};
> +		};

AFAIK mt8365 has only 3 thermal sensors, therefore tzts4 should not be
added.

Regards,
Amjad

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  2022-05-31 13:50 ` [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree Fabien Parent
  2022-06-01 10:37   ` Krzysztof Kozlowski
  2022-07-20 13:12   ` Amjad Ouled-Ameur
@ 2022-07-26  9:57   ` Amjad Ouled-Ameur
  2 siblings, 0 replies; 44+ messages in thread
From: Amjad Ouled-Ameur @ 2022-07-26  9:57 UTC (permalink / raw)
  To: fparent
  Cc: broonie, chaotian.jing, chunfeng.yun, devicetree, dmaengine,
	jic23, krzysztof.kozlowski+dt, linux-arm-kernel, linux-i2c,
	linux-iio, linux-kernel, linux-mediatek, linux-mmc, linux-phy,
	linux-serial, linux-spi, linux-usb, linux-watchdog, linux,
	matthias.bgg, qii.wang, robh+dt, srinivas.kandagatla,
	ulf.hansson, vkoul, wim

Hi Fabien,

Could you please add CPUIDLE support:

diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
index 323c814c10cc..1df4075db58f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -59,6 +59,7 @@ cpu0: cpu@0 {
 			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate";
+			cpu-idle-states = <&MCDI_CPU &MCDI_CLUSTER &DPIDLE>;
 			operating-points-v2 = <&cluster0_opp>;
 			#cooling-cells = <2>;
 			enable-method = "psci";
@@ -72,6 +73,7 @@ cpu1: cpu@1 {
 			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate", "armpll";
+			cpu-idle-states = <&MCDI_CPU &MCDI_CLUSTER &DPIDLE>;
 			operating-points-v2 = <&cluster0_opp>;
 			#cooling-cells = <2>;
 			enable-method = "psci";
@@ -85,6 +87,7 @@ cpu2: cpu@2 {
 			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate", "armpll";
+			cpu-idle-states = <&MCDI_CPU &MCDI_CLUSTER &DPIDLE>;
 			operating-points-v2 = <&cluster0_opp>;
 			#cooling-cells = <2>;
 			enable-method = "psci";
@@ -98,10 +101,42 @@ cpu3: cpu@3 {
 			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
 				 <&apmixedsys CLK_APMIXED_MAINPLL>;
 			clock-names = "cpu", "intermediate", "armpll";
+			cpu-idle-states = <&MCDI_CPU &MCDI_CLUSTER &DPIDLE>;
 			operating-points-v2 = <&cluster0_opp>;
 			#cooling-cells = <2>;
 			enable-method = "psci";
 		};
+
+		idle-states {
+			entry-method = "psci";
+
+			MCDI_CPU: mcdi-cpu {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x00010001>;
+				entry-latency-us = <300>;
+				exit-latency-us = <200>;
+				min-residency-us = <1000>;
+			};
+
+			MCDI_CLUSTER: mcdi-cluster {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010001>;
+				entry-latency-us = <350>;
+				exit-latency-us = <250>;
+				min-residency-us = <1200>;
+			};
+
+			DPIDLE: dpidle {
+				compatible = "arm,idle-state";
+				local-timer-stop;
+				arm,psci-suspend-param = <0x01010004>;
+				entry-latency-us = <300>;
+				exit-latency-us = <800>;
+				min-residency-us = <3300>;
+			};
+		};
 	};
 
 	cluster0_opp: opp-table-0 {

I have tested it on i350 evk and each idle state is used properly.

Regards,
Amjad

^ permalink raw reply related	[flat|nested] 44+ messages in thread

* Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  2022-07-20 13:12   ` Amjad Ouled-Ameur
@ 2022-09-14 13:27     ` Amjad Ouled-Ameur
  0 siblings, 0 replies; 44+ messages in thread
From: Amjad Ouled-Ameur @ 2022-09-14 13:27 UTC (permalink / raw)
  To: fparent
  Cc: broonie, chaotian.jing, chunfeng.yun, devicetree, dmaengine,
	jic23, krzysztof.kozlowski+dt, linux-arm-kernel, linux-i2c,
	linux-iio, linux-kernel, linux-mediatek, linux-mmc, linux-phy,
	linux-serial, linux-spi, linux-usb, linux-watchdog, linux,
	matthias.bgg, qii.wang, robh+dt, srinivas.kandagatla,
	ulf.hansson, vkoul, wim

Hi Fabien,

On 7/20/22 15:12, Amjad Ouled-Ameur wrote:
> Hi Fabien,
>
>> +		tzts4: tzts4-thermal {
>> +			polling-delay-passive = <0>;
>> +			polling-delay = <0>;
>> +			thermal-sensors = <&thermal 4>;
>> +			trips {};
>> +			cooling-maps {};
>> +		};
> AFAIK mt8365 has only 3 thermal sensors, therefore tzts4 should not be
> added.

I discussed this further with MediaTek. tzts1, tzts2, tzts3 and tzts4 
are used

for test-purpose only. Since they do not have trip points, thermal core 
wouldn't

register them anyway. Thus, I think we should remove them altogether. Only

cpu_thermal zone is relevant and should remain.


Regards,

Amjad

> Regards,
> Amjad

^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  2022-06-01 10:37   ` Krzysztof Kozlowski
@ 2022-09-22  2:49     ` Chunfeng Yun
  2022-09-22  2:54     ` Chunfeng Yun
  1 sibling, 0 replies; 44+ messages in thread
From: Chunfeng Yun @ 2022-09-22  2:49 UTC (permalink / raw)
  To: Krzysztof Kozlowski, Fabien Parent, robh+dt,
	krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg, jic23,
	chaotian.jing, ulf.hansson, srinivas.kandagatla, broonie, wim,
	linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On Wed, 2022-06-01 at 12:37 +0200, Krzysztof Kozlowski wrote:
> On 31/05/2022 15:50, Fabien Parent wrote:
> > Add device-tree for the MT8365 SoC. More information can be found
> > about that SoC at the following address:
> > https://www.mediatek.com/products/aiot/i350-mt8365
> > 
> > Signed-off-by: Fabien Parent <fparent@baylibre.com>
> > ---
> >  arch/arm64/boot/dts/mediatek/mt8365.dtsi | 1047
> > ++++++++++++++++++++++
> >  1 file changed, 1047 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> > new file mode 100644
> > index 000000000000..e22b1d259418
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> > @@ -0,0 +1,1047 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +/*
> > + * Copyright (c) 2018 MediaTek Inc.
> > + */
> > +
> > +#include <dt-bindings/clock/mediatek,mt8365-clk.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/phy/phy.h>
> > +#include <dt-bindings/power/mt8365-power.h>
> > +#include <dt-bindings/memory/mt8365-larb-port.h>
> > +#include <dt-bindings/thermal/thermal.h>
> > +
> > +/ {
> > +	compatible = "mediatek,mt8365";
> > +	interrupt-parent = <&sysirq>;
> > +	#address-cells = <2>;
> > +	#size-cells = <2>;
> > +
> > +	aliases {
> > +		ovl0 = &ovl0;
> > +		rdma0 = &rdma0;
> > +		rdma1 = &rdma1;
> > +		color0 = &color0;
> > +		ccorr0 = &ccorr0;
> > +		aal0 = &aal0;
> > +		gamma0 = &gamma0;
> > +		dither0 = &dither0;
> > +		dsi0 = &dsi0;
> > +		dpi0 = &dpi0;
> > +	};
> > +
> > +	cpus: cpus {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		cpu-map {
> > +			cluster0: cluster0 {
> > +				core0 {
> > +					cpu = <&cpu0>;
> > +				};
> > +				core1 {
> > +					cpu = <&cpu1>;
> > +				};
> > +				core2 {
> > +					cpu = <&cpu2>;
> > +				};
> > +				core3 {
> > +					cpu = <&cpu3>;
> > +				};
> > +			};
> > +		};
> > +
> > +		cpu0: cpu@0 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x0>;
> > +			clock-frequency = <1600000000>;
> > +			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> > +				 <&apmixedsys CLK_APMIXED_MAINPLL>;
> > +			clock-names = "cpu", "intermediate";
> > +			operating-points-v2 = <&cluster0_opp>;
> > +			#cooling-cells = <2>;
> > +			enable-method = "psci";
> > +		};
> > +
> > +		cpu1: cpu@1 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x1>;
> > +			clock-frequency = <1600000000>;
> > +			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> > +				 <&apmixedsys CLK_APMIXED_MAINPLL>;
> > +			clock-names = "cpu", "intermediate", "armpll";
> > +			operating-points-v2 = <&cluster0_opp>;
> > +			#cooling-cells = <2>;
> > +			enable-method = "psci";
> > +		};
> > +
> > +		cpu2: cpu@2 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x2>;
> > +			clock-frequency = <1600000000>;
> > +			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> > +				 <&apmixedsys CLK_APMIXED_MAINPLL>;
> > +			clock-names = "cpu", "intermediate", "armpll";
> > +			operating-points-v2 = <&cluster0_opp>;
> > +			#cooling-cells = <2>;
> > +			enable-method = "psci";
> > +		};
> > +
> > +		cpu3: cpu@3 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x3>;
> > +			clock-frequency = <1600000000>;
> > +			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> > +				 <&apmixedsys CLK_APMIXED_MAINPLL>;
> > +			clock-names = "cpu", "intermediate", "armpll";
> > +			operating-points-v2 = <&cluster0_opp>;
> > +			#cooling-cells = <2>;
> > +			enable-method = "psci";
> > +		};
> > +	};
> > +
> > +	cluster0_opp: opp-table-0 {
> > +		compatible = "operating-points-v2";
> > +		opp-shared;
> > +		opp-850000000 {
> > +			opp-hz = /bits/ 64 <850000000>;
> > +			opp-microvolt = <650000>;
> > +		};
> > +		opp-918000000 {
> > +			opp-hz = /bits/ 64 <918000000>;
> > +			opp-microvolt = <668750>;
> > +		};
> > +		opp-987000000 {
> > +			opp-hz = /bits/ 64 <987000000>;
> > +			opp-microvolt = <687500>;
> > +		};
> > +		opp-1056000000 {
> > +			opp-hz = /bits/ 64 <1056000000>;
> > +			opp-microvolt = <706250>;
> > +		};
> > +		opp-1125000000 {
> > +			opp-hz = /bits/ 64 <1125000000>;
> > +			opp-microvolt = <725000>;
> > +		};
> > +		opp-1216000000 {
> > +			opp-hz = /bits/ 64 <1216000000>;
> > +			opp-microvolt = <750000>;
> > +		};
> > +		opp-1308000000 {
> > +			opp-hz = /bits/ 64 <1308000000>;
> > +			opp-microvolt = <775000>;
> > +		};
> > +		opp-1400000000 {
> > +			opp-hz = /bits/ 64 <1400000000>;
> > +			opp-microvolt = <800000>;
> > +		};
> > +		opp-1466000000 {
> > +			opp-hz = /bits/ 64 <1466000000>;
> > +			opp-microvolt = <825000>;
> > +		};
> > +		opp-1533000000 {
> > +			opp-hz = /bits/ 64 <1533000000>;
> > +			opp-microvolt = <850000>;
> > +		};
> > +		opp-1633000000 {
> > +			opp-hz = /bits/ 64 <1633000000>;
> > +			opp-microvolt = <887500>;
> > +		};
> > +		opp-1700000000 {
> > +			opp-hz = /bits/ 64 <1700000000>;
> > +			opp-microvolt = <912500>;
> > +		};
> > +		opp-1767000000 {
> > +			opp-hz = /bits/ 64 <1767000000>;
> > +			opp-microvolt = <937500>;
> > +		};
> > +		opp-1834000000 {
> > +			opp-hz = /bits/ 64 <1834000000>;
> > +			opp-microvolt = <962500>;
> > +		};
> > +		opp-1917000000 {
> > +			opp-hz = /bits/ 64 <1917000000>;
> > +			opp-microvolt = <993750>;
> > +		};
> > +		opp-2001000000 {
> > +			opp-hz = /bits/ 64 <2001000000>;
> > +			opp-microvolt = <1025000>;
> > +		};
> > +	};
> > +
> > +	clk26m: oscillator {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		clock-frequency = <26000000>;
> 
> This does not look like property of a SoC. Are you sure MT8365 SoC
> has
> this clock (not the board)?
> 
> > +		clock-output-names = "clk26m";
> > +	};
> > +
> > +	psci {
> > +		compatible = "arm,psci-1.0";
> > +		method = "smc";
> > +	};
> > +
> > +	reserved-memory {
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +		ranges;
> > +
> > +		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
> > +		bl31_secmon_reserved: secmon@43000000 {
> > +			no-map;
> > +			reg = <0 0x43000000 0 0x20000>;
> > +		};
> > +	};
> > +
> > +	soc {
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +		compatible = "simple-bus";
> > +		ranges;
> > +
> > +		gic: interrupt-controller@c000000 {
> > +			compatible = "arm,gic-v3";
> > +			#interrupt-cells = <4>;
> 
> Why do you have four cells here (and passing 0 as interrupt)?
> 
> > +			interrupt-parent = <&gic>;
> > +			interrupt-controller;
> > +			reg = <0 0x0c000000 0 0x80000>,
> > +			      <0 0x0c080000 0 0x80000>;
> > +
> > +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> > +		};
> > +
> > +		topckgen: syscon@10000000 {
> > +			compatible = "mediatek,mt8365-topckgen",
> > "syscon";
> > +			reg = <0 0x10000000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		infracfg: syscon@10001000 {
> > +			compatible = "mediatek,mt8365-infracfg",
> > "syscon";
> > +			reg = <0 0x10001000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		pericfg: syscon@10003000 {
> > +			compatible = "mediatek,mt8365-pericfg",
> > "syscon";
> > +			reg = <0 0x10003000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		syscfg_pctl: syscfg-pctl@10005000 {
> 
> This is I guess also syscon, like other nodes?
> 
> > +			compatible = "syscon";
> 
> You need specific compatible. Please run `make dtbs_check` and fix
> the
> errors.
> 
> > +			reg = <0 0x10005000 0 0x1000>;
> > +		};
> > +
> > +		scpsys: syscon@10006000 {
> > +			compatible = "syscon", "simple-mfd";
> 
> You need specific compatible.
> 
> > +			reg = <0 0x10006000 0 0x1000>;
> > +			#power-domain-cells = <1>;
> 
> This is definitely wrong now. It's not a simple-mfd device, so please
> do
> not use that property.
> 
> > +
> > +			/* System Power Manager */
> > +			spm: power-controller {
> > +				compatible = "mediatek,mt8365-power-
> > controller";
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +				#power-domain-cells = <1>;
> > +
> > +				/* power domains of the SoC */
> 
> The comment suggests you will later add here power domains not for
> the
> SoC. If that's not true, just skip the comment.
> 
> > +				power-domain@MT8365_POWER_DOMAIN_MM {
> > +					reg = <MT8365_POWER_DOMAIN_MM>;
> > +					clocks = <&topckgen
> > CLK_TOP_MM_SEL>,
> > +						 <&mmsys
> > CLK_MM_MM_SMI_COMMON>,
> > +						 <&mmsys
> > CLK_MM_MM_SMI_COMM0>,
> > +						 <&mmsys
> > CLK_MM_MM_SMI_COMM1>,
> > +						 <&mmsys
> > CLK_MM_MM_SMI_LARB0>;
> > +					clock-names = "mm", "mm-0",
> > "mm-1",
> > +						      "mm-2", "mm-3";
> > +					#power-domain-cells = <0>;
> > +					mediatek,infracfg =
> > <&infracfg>;
> > +					mediatek,infracfg_nao =
> > <&infracfg_nao>;
> > +					#address-cells = <1>;
> > +					#size-cells = <0>;
> > +
> > +					power-domain@MT8365_POWER_DOMAI
> > N_CAM {
> > +						reg =
> > <MT8365_POWER_DOMAIN_CAM>;
> > +						clocks = <&camsys
> > CLK_CAM_LARB2>,
> > +							 <&camsys
> > CLK_CAM_SENIF>,
> > +							 <&camsys
> > CLK_CAMSV0>,
> > +							 <&camsys
> > CLK_CAMSV1>,
> > +							 <&camsys
> > CLK_CAM_FDVT>,
> > +							 <&camsys
> > CLK_CAM_WPE>;
> > +						clock-names = "cam-0",
> > "cam-1",
> > +							      "cam-2",
> > "cam-3",
> > +							      "cam-4",
> > "cam-5";
> > +						#power-domain-cells =
> > <0>;
> > +						mediatek,infracfg =
> > <&infracfg>;
> > +						mediatek,smi =
> > <&smi_common>;
> > +					};
> > +
> > +					power-domain@MT8365_POWER_DOMAI
> > N_VDEC {
> > +						reg =
> > <MT8365_POWER_DOMAIN_VDEC>;
> > +						#power-domain-cells =
> > <0>;
> > +						mediatek,smi =
> > <&smi_common>;
> > +					};
> > +
> > +					power-domain@MT8365_POWER_DOMAI
> > N_VENC {
> > +						reg =
> > <MT8365_POWER_DOMAIN_VENC>;
> > +						#power-domain-cells =
> > <0>;
> > +						mediatek,smi =
> > <&smi_common>;
> > +					};
> > +
> > +					power-domain@MT8365_POWER_DOMAI
> > N_APU {
> > +						reg =
> > <MT8365_POWER_DOMAIN_APU>;
> > +						clocks = <&infracfg
> > CLK_IFR_APU_AXI>,
> > +							 <&apu
> > CLK_APU_IPU_CK>,
> > +							 <&apu
> > CLK_APU_AXI>,
> > +							 <&apu
> > CLK_APU_JTAG>,
> > +							 <&apu
> > CLK_APU_IF_CK>,
> > +							 <&apu
> > CLK_APU_EDMA>,
> > +							 <&apu
> > CLK_APU_AHB>;
> > +						clock-names = "apu",
> > "apu-0",
> > +							      "apu-1",
> > "apu-2",
> > +							      "apu-3",
> > "apu-4",
> > +							      "apu-5";
> > +						#power-domain-cells =
> > <0>;
> > +						mediatek,infracfg =
> > <&infracfg>;
> > +						mediatek,smi =
> > <&smi_common>;
> > +					};
> > +				};
> > +
> > +				power-domain@MT8365_POWER_DOMAIN_CONN {
> > +					reg =
> > <MT8365_POWER_DOMAIN_CONN>;
> > +					clocks = <&topckgen
> > CLK_TOP_CONN_32K>,
> > +						 <&topckgen
> > CLK_TOP_CONN_26M>;
> > +					clock-names = "conn", "conn1";
> > +					#power-domain-cells = <0>;
> > +					mediatek,infracfg =
> > <&infracfg>;
> > +				};
> > +
> > +				power-domain@MT8365_POWER_DOMAIN_MFG {
> > +					reg =
> > <MT8365_POWER_DOMAIN_MFG>;
> > +					clocks = <&topckgen
> > CLK_TOP_MFG_SEL>;
> > +					clock-names = "mfg";
> > +					#power-domain-cells = <0>;
> > +					mediatek,infracfg =
> > <&infracfg>;
> > +				};
> > +
> > +				power-domain@MT8365_POWER_DOMAIN_AUDIO
> > {
> > +					reg =
> > <MT8365_POWER_DOMAIN_AUDIO>;
> > +					clocks = <&topckgen
> > CLK_TOP_AUD_INTBUS_SEL>,
> > +						 <&infracfg
> > CLK_IFR_AUDIO>,
> > +						 <&infracfg
> > CLK_IFR_AUD_26M_BK>;
> > +					clock-names = "audio",
> > "audio1", "audio2";
> > +					#power-domain-cells = <0>;
> > +					mediatek,infracfg =
> > <&infracfg>;
> > +				};
> > +
> > +				power-domain@MT8365_POWER_DOMAIN_DSP {
> > +					reg =
> > <MT8365_POWER_DOMAIN_DSP>;
> > +					clocks = <&topckgen
> > CLK_TOP_DSP_SEL>,
> > +						 <&topckgen
> > CLK_TOP_DSP_26M>;
> > +					clock-names = "dsp", "dsp1";
> > +					#power-domain-cells = <0>;
> > +					mediatek,infracfg =
> > <&infracfg>;
> > +				};
> > +			};
> > +		};
> > +
> > +		watchdog: watchdog@10007000 {
> > +			compatible = "mediatek,mt8365-wdt",
> > +				     "mediatek,mt6589-wdt";
> > +			reg = <0 0x10007000 0 0x100>;
> > +			#reset-cells = <1>;
> > +		};
> > +
> > +		gpt: apxgpt@10008000 {
> 
> Generic node names, so "timer"
> 
> > +			compatible = "mediatek,mt8365-timer",
> > +				     "mediatek,mt6577-timer";
> > +			reg = <0 0x10008000 0 0x1000>;
> > +			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&topckgen CLK_TOP_SYS_26M_D2>;
> > +			clock-names = "clk13m";
> > +		};
> > +
> > +		pio: pinctrl@1000b000 {
> > +			compatible = "mediatek,mt8365-pinctrl";
> > +			reg = <0 0x1000b000 0 0x1000>;
> > +			mediatek,pctl-regmap = <&syscfg_pctl>;
> > +			pins-are-numbered;
> > +			gpio-controller;
> > +			#gpio-cells = <2>;
> > +			interrupt-controller;
> > +			#interrupt-cells = <2>;
> > +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> > +		};
> > +
> > +		apmixedsys: syscon@1000c000 {
> > +			compatible = "mediatek,mt8365-apmixedsys",
> > "syscon";
> > +			reg = <0 0x1000c000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		pwrap: pwrap@1000d000 {
> > +			compatible = "mediatek,mt8365-pwrap";
> > +			reg = <0 0x1000d000 0 0x1000>;
> > +			reg-names = "pwrap";
> > +			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&infracfg CLK_IFR_PWRAP_SPI>,
> > +				 <&infracfg CLK_IFR_PMIC_AP>,
> > +				 <&infracfg CLK_IFR_PWRAP_SYS>,
> > +				 <&infracfg CLK_IFR_PWRAP_TMR>;
> > +			clock-names = "spi", "wrap", "sys", "tmr";
> > +		};
> > +
> > +		keypad: kp@10010000 {
> 
> s/kp/keypad/
> 
> > +			compatible = "mediatek,mt6779-keypad";
> > +			reg = <0 0x10010000 0 0x1000>;
> > +			wakeup-source;
> > +			interrupts = <GIC_SPI 124
> > IRQ_TYPE_EDGE_FALLING>;
> > +			clocks = <&clk26m>;
> > +			clock-names = "kpd";
> > +			status = "disabled";
> > +		};
> > +
> > +		mcucfg: syscon@10200000 {
> > +			compatible = "mediatek,mt8365-mcucfg",
> > "syscon";
> > +			reg = <0 0x10200000 0 0x2000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		sysirq: intpol-controller@10200a80 {
> 
> interrupt-controller
> 
> > +			compatible = "mediatek,mt8365-sysirq",
> > +				     "mediatek,mt6577-sysirq";
> > +			interrupt-controller;
> > +			#interrupt-cells = <3>;
> > +			interrupt-parent = <&gic>;
> > +			reg = <0 0x10200a80 0 0x20>;
> > +		};
> > +
> > +		iommu: iommu@10205000 {
> > +			compatible = "mediatek,mt8365-m4u";
> > +			reg = <0 0x10205000 0 0x1000>;
> > +			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_LOW>;
> > +			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
> > <&larb3>;
> > +			#iommu-cells = <1>;
> > +		};
> > +
> > +		infracfg_nao: infracfg-nao@1020e000 {
> 
> Other nodes are named syscon
> 
> > +			compatible = "syscon";
> 
> No, syscon cannot be alone.
> 
> > +			reg = <0 0x1020e000 0 0x1000>;
> > +		};
> > +
> > +		rng: rng@1020f000 {
> > +			compatible = "mediatek,mt8365-rng",
> > +				     "mediatek,mt7623-rng";
> > +			reg = <0 0x1020f000 0 0x100>;
> > +			clocks = <&infracfg CLK_IFR_TRNG>;
> > +			clock-names = "rng";
> > +		};
> > +
> > +		apdma: dma-controller@11000280 {
> > +			compatible = "mediatek,mt8365-uart-dma",
> > +				     "mediatek,mt6577-uart-dma";
> > +			reg = <0 0x11000280 0 0x80>,
> > +			      <0 0x11000300 0 0x80>,
> > +			      <0 0x11000380 0 0x80>,
> > +			      <0 0x11000400 0 0x80>,
> > +			      <0 0x11000580 0 0x80>,
> > +			      <0 0x11000600 0 0x80>;
> > +			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
> > +				     <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
> > +				     <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
> > +				     <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
> > +				     <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
> > +				     <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
> > +			dma-requests = <6>;
> > +			clocks = <&infracfg CLK_IFR_AP_DMA>;
> > +			clock-names = "apdma";
> > +			#dma-cells = <1>;
> > +		};
> > +
> > +		auxadc: adc@11001000 {
> > +			compatible = "mediatek,mt8365-auxadc",
> > +				     "mediatek,mt8173-auxadc";
> > +			reg = <0 0x11001000 0 0x1000>;
> > +			clocks = <&infracfg CLK_IFR_AUXADC>;
> > +			clock-names = "main";
> > +			#io-channel-cells = <1>;
> > +		};
> > +
> > +		uart0: serial@11002000 {
> > +			compatible = "mediatek,mt8365-uart",
> > +				     "mediatek,mt6577-uart";
> > +			reg = <0 0x11002000 0 0x1000>;
> > +			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
> > +			clock-names = "baud", "bus";
> > +			dmas = <&apdma 0
> > +				&apdma 1>;
> 
> You need to split these into two phandles.
> 
> > +			dma-names = "tx", "rx";
> > +			status = "disabled";
> > +		};
> > +
> > +		uart1: serial@11003000 {
> > +			compatible = "mediatek,mt8365-uart",
> > +				     "mediatek,mt6577-uart";
> > +			reg = <0 0x11003000 0 0x1000>;
> > +			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
> > +			clock-names = "baud", "bus";
> > +			dmas = <&apdma 2
> > +				&apdma 3>;
> 
> Ditto.
> 
> > +			dma-names = "tx", "rx";
> > +			status = "disabled";
> > +		};
> > +
> > +		uart2: serial@11004000 {
> > +			compatible = "mediatek,mt8365-uart",
> > +				     "mediatek,mt6577-uart";
> > +			reg = <0 0x11004000 0 0x1000>;
> > +			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
> > +			clock-names = "baud", "bus";
> > +			dmas = <&apdma 4
> > +				&apdma 5>;
> > +			dma-names = "tx", "rx";
> > +			status = "disabled";
> > +		};
> > +
> > +		pwm: pwm@11006000 {
> > +			compatible = "mediatek,mt8365-pwm";
> > +			reg = <0 0x11006000 0 0x1000>;
> > +			#pwm-cells = <2>;
> > +			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&infracfg CLK_IFR_PWM_HCLK>,
> > +				 <&infracfg CLK_IFR_PWM>,
> > +				 <&infracfg CLK_IFR_PWM1>,
> > +				 <&infracfg CLK_IFR_PWM2>,
> > +				 <&infracfg CLK_IFR_PWM3>;
> > +			clock-names = "top", "main", "pwm1", "pwm2",
> > "pwm3";
> > +		};
> > +
> > +		i2c0: i2c@11007000 {
> > +			compatible = "mediatek,mt8365-i2c",
> > +				     "mediatek,mt8168-i2c";
> > +			reg = <0 0x11007000 0 0xa0>,
> > +			      <0 0x11000080 0 0x80>;
> > +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
> > +			clock-div = <1>;
> > +			clocks = <&infracfg CLK_IFR_I2C0_AXI>,
> > +				 <&infracfg CLK_IFR_AP_DMA>;
> > +			clock-names = "main", "dma";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			status = "disabled";
> > +		};
> > +
> > +		i2c1: i2c@11008000 {
> > +			compatible = "mediatek,mt8365-i2c",
> > +				     "mediatek,mt8168-i2c";
> > +			reg = <0 0x11008000 0 0xa0>,
> > +			      <0 0x11000100 0 0x80>;
> > +			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
> > +			clock-div = <1>;
> > +			clocks = <&infracfg CLK_IFR_I2C1_AXI>,
> > +				 <&infracfg CLK_IFR_AP_DMA>;
> > +			clock-names = "main", "dma";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			status = "disabled";
> > +		};
> > +
> > +		i2c2: i2c@11009000 {
> > +			compatible = "mediatek,mt8365-i2c",
> > +				     "mediatek,mt8168-i2c";
> > +			reg = <0 0x11009000 0 0xa0>,
> > +			      <0 0x11000180 0 0x80>;
> > +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
> > +			clock-div = <1>;
> > +			clocks = <&infracfg CLK_IFR_I2C2_AXI>,
> > +				 <&infracfg CLK_IFR_AP_DMA>;
> > +			clock-names = "main", "dma";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			status = "disabled";
> > +		};
> > +
> > +		spi: spi@1100a000 {
> > +			compatible = "mediatek,mt8365-spi",
> > +				     "mediatek,mt7622-spi";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <0 0x1100a000 0 0x100>;
> 
> Reg goes after compatible.
> 
> > +			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
> > +				 <&topckgen CLK_TOP_SPI_SEL>,
> > +				 <&infracfg CLK_IFR_SPI0>;
> > +			clock-names = "parent-clk", "sel-clk", "spi-
> > clk";
> > +			status = "disabled";
> > +		};
> > +
> > +		thermal: thermal@1100b000 {
> > +			compatible = "mediatek,mt8365-thermal";
> > +			reg = <0 0x1100b000 0 0x1000>;
> > +			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&infracfg CLK_IFR_THERM>,
> > +				 <&infracfg CLK_IFR_AUXADC>;
> > +			clock-names = "therm", "auxadc";
> > +			mediatek,auxadc = <&auxadc>;
> > +			mediatek,apmixedsys = <&apmixedsys>;
> > +			nvmem-cells = <&thermal_calibration>;
> > +			nvmem-cell-names = "calibration-data";
> > +			#thermal-sensor-cells = <1>;
> > +		};
> > +
> > +		disp_pwm: disp-pwm@1100e000 {
> 
> Generic node names, so "pwm"
> 
> > +			compatible = "mediatek,mt8365-disp-pwm",
> > +				     "mediatek,mt8183-disp-pwm";
> > +			reg = <0 0x1100e000 0 0x1000>;
> > +			#pwm-cells = <2>;
> > +			clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>,
> > +				 <&infracfg CLK_IFR_DISP_PWM>;
> > +			clock-names = "main", "mm";
> > +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> > +			status = "disabled";
> > +		};
> > +
> > +		i2c3: i2c@1100f000 {
> > +			compatible = "mediatek,mt8365-i2c",
> > +				     "mediatek,mt8168-i2c";
> > +			reg = <0 0x1100f000 0 0xa0>,
> > +			      <0 0x11000200 0 0x80>;
> > +			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
> > +			clock-div = <1>;
> > +			clocks = <&infracfg CLK_IFR_I2C3_AXI>,
> > +				 <&infracfg CLK_IFR_AP_DMA>;
> > +			clock-names = "main", "dma";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			status = "disabled";
> > +		};
> > +
> > +		ssusb: usb@11201000 {
> > +			compatible = "mediatek,mt8365-mtu3",
> > "mediatek,mtu3";
> > +			reg = <0 0x11201000 0 0x2e00>,
> > +			      <0 0x11203e00 0 0x0100>;
> > +			reg-names = "mac", "ippc";
> > +			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
> > +			phys = <&u2port0 PHY_TYPE_USB2>,
> > +			       <&u2port1 PHY_TYPE_USB2>;
> > +			clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
> > +				 <&infracfg CLK_IFR_SSUSB_REF>,
> > +				 <&infracfg CLK_IFR_SSUSB_SYS>,
> > +				 <&infracfg CLK_IFR_ICUSB>;
> > +			clock-names = "sys_ck", "ref_ck", "mcu_ck",
> > +				      "dma_ck";
> > +			#address-cells = <2>;
> > +			#size-cells = <2>;
> > +			ranges;
> > +			status = "disabled";
> > +
> > +			usb_host: usb@11200000 {
> > +				compatible = "mediatek,mt8365-xhci",
> > +					     "mediatek,mtk-xhci";
> > +				reg = <0 0x11200000 0 0x1000>;
> > +				reg-names = "mac";
> > +				interrupts = <GIC_SPI 67
> > IRQ_TYPE_LEVEL_LOW>;
> > +				clocks = <&topckgen
> > CLK_TOP_SSUSB_TOP_CK_EN>,
> > +					 <&infracfg CLK_IFR_SSUSB_REF>,
> > +					 <&infracfg CLK_IFR_SSUSB_SYS>,
> > +					 <&infracfg CLK_IFR_ICUSB>,
> > +					 <&infracfg
> > CLK_IFR_SSUSB_XHCI>;
> > +				clock-names = "sys_ck", "ref_ck",
> > "mcu_ck",
> > +					      "dma_ck", "xhci_ck";
> > +				status = "disabled";
> > +			};
> > +		};
> > +
> > +		mmc0: mmc@11230000 {
> > +			compatible = "mediatek,mt8365-mmc",
> > "mediatek,mt8183-mmc";
> > +			reg = <0 0x11230000 0 0x1000>,
> > +			      <0 0x11cd0000 0 0x1000>;
> > +			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
> > +				 <&infracfg CLK_IFR_MSDC0_HCLK>,
> > +				 <&infracfg CLK_IFR_MSDC0_SRC>;
> > +			clock-names = "source", "hclk", "source_cg";
> > +			status = "disabled";
> > +		};
> > +
> > +		mmc1: mmc@11240000 {
> > +			compatible = "mediatek,mt8365-mmc",
> > "mediatek,mt8183-mmc";
> > +			reg = <0 0x11240000 0 0x1000>,
> > +			      <0 0x11c90000 0 0x1000>;
> > +			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
> > +				 <&infracfg CLK_IFR_MSDC1_HCLK>,
> > +				 <&infracfg CLK_IFR_MSDC1_SRC>;
> > +			clock-names = "source", "hclk", "source_cg";
> > +			status = "disabled";
> > +		};
> > +
> > +		ethernet: ethernet@112a0000 {
> > +			compatible = "mediatek,mt8365-eth";
> > +			reg = <0 0x112a0000 0 0x1000>;
> > +			mediatek,pericfg = <&infracfg>;
> > +			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&topckgen CLK_TOP_ETH_SEL>,
> > +				 <&infracfg CLK_IFR_NIC_AXI>,
> > +				 <&infracfg CLK_IFR_NIC_SLV_AXI>;
> > +			clock-names = "core", "reg", "trans";
> > +			status = "disabled";
> > +		};
> > +
> > +		mipi_tx0: dsi-phy@11c00000 {
> > +			compatible = "mediatek,mt8365-mipi-tx",
> > +				     "mediatek,mt8183-mipi-tx";
> > +			reg = <0 0x11c00000 0 0x800>;
> > +			clocks = <&clk26m>;
> > +			clock-names = "ref_clk";
> > +			#clock-cells = <0>;
> > +			#phy-cells = <0>;
> > +			clock-output-names = "mipi_tx0_pll";
> > +		};
> > +
> > +		efuse: efuse@11c50000 {
> > +			compatible = "mediatek,mt8365-efuse",
> > "mediatek,efuse";
> > +			reg = <0 0x11c50000 0 0x1000>;
> > +			#address-cells = <1>;
> > +			#size-cells = <1>;
> > +
> > +			thermal_calibration: calib@180 {
> > +				reg = <0x180 0xc>;
> > +			};
> > +		};
> > +
> > +		u3phy: t-phy@11cc0000 {
> 
> s/t-phy/phy/
can't use phy here, if will cause dt-binding check fail.

> 
> > +			compatible = "mediatek,mt8365-tphy",
> > +				     "mediatek,generic-tphy-v2";
> > +			#address-cells = <2>;
> > +			#phy-cells = <1>;
> 
> address-cells, then size, then phy
> 
> > +			#size-cells = <2>;
> > +			ranges;
> > +			status = "okay";
> 
> No need for status ok.
> 
> > +
> > +			u2port0: usb-phy@11cc0000 {
> > +				reg = <0 0x11cc0000 0 0x400>;
> > +				clocks = <&topckgen
> > CLK_TOP_SSUSB_PHY_CK_EN>,
> > +					 <&topckgen
> > CLK_TOP_USB20_48M_EN>;
> > +				clock-names = "ref", "da_ref";
> > +				#phy-cells = <1>;
> > +				status = "okay";
> 
> Ditto
> 
> > +			};
> > +
> > +			u2port1: usb-phy@11cc1000 {
> > +				reg = <0 0x11cc1000 0 0x400>;
> > +				clocks = <&topckgen
> > CLK_TOP_SSUSB_PHY_CK_EN>,
> > +					 <&topckgen
> > CLK_TOP_USB20_48M_EN>;
> > +				clock-names = "ref", "da_ref";
> > +				#phy-cells = <1>;
> > +				status = "okay";
> > +			};
> > +		};
> > +
> > +		mfgcfg: syscon@13000000 {
> > +			compatible = "mediatek,mt8365-mfgcfg",
> > "syscon";
> > +			reg = <0 0x13000000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		mmsys: syscon@14000000 {
> > +			compatible = "mediatek,mt8365-mmsys", "syscon";
> > +			reg = <0 0x14000000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		mutex: mutex@14001000 {
> > +			compatible =  "mediatek,mt8365-disp-mutex";
> > +			reg = <0 0x14001000 0 0x1000>;
> > +			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
> > +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> > +		};
> > +
> > +		smi_common: smi@14002000 {
> 
> s/smi/memory-controller/ in node name?
> 
> > +			compatible = "mediatek,mt8365-smi-common",
> > +				     "mediatek,mt8186-smi-common";
> > +			reg = <0 0x14002000 0 0x1000>;
> > +			clocks = <&mmsys CLK_MM_MM_SMI_COMMON>,
> > +				 <&mmsys CLK_MM_MM_SMI_COMMON>,
> > +				 <&mmsys CLK_MM_MM_SMI_COMM0>,
> > +				 <&mmsys CLK_MM_MM_SMI_COMM1>;
> > +			clock-names = "apb", "smi", "gals0", "gals1";
> > +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> > +		};
> > +
> > +		larb0: larb@14003000 {
> 
> The same?
> 
> > +			compatible = "mediatek,mt8365-smi-larb",
> > +				     "mediatek,mt8186-smi-larb";
> > +			reg = <0 0x14003000 0 0x1000>;
> > +			mediatek,smi = <&smi_common>;
> > +			clocks = <&mmsys CLK_MM_MM_SMI_LARB0>,
> > +				 <&mmsys CLK_MM_MM_SMI_LARB0>;
> > +			clock-names = "apb", "smi";
> > +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> 
> 
> 
> Best regards,
> Krzysztof


^ permalink raw reply	[flat|nested] 44+ messages in thread

* Re: [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree
  2022-06-01 10:37   ` Krzysztof Kozlowski
  2022-09-22  2:49     ` Chunfeng Yun
@ 2022-09-22  2:54     ` Chunfeng Yun
  1 sibling, 0 replies; 44+ messages in thread
From: Chunfeng Yun @ 2022-09-22  2:54 UTC (permalink / raw)
  To: Krzysztof Kozlowski, Fabien Parent, robh+dt,
	krzysztof.kozlowski+dt, vkoul, qii.wang, matthias.bgg, jic23,
	chaotian.jing, ulf.hansson, srinivas.kandagatla, broonie, wim,
	linux
  Cc: devicetree, linux-kernel, dmaengine, linux-i2c, linux-arm-kernel,
	linux-mediatek, linux-iio, linux-mmc, linux-phy, linux-serial,
	linux-spi, linux-usb, linux-watchdog

On Wed, 2022-06-01 at 12:37 +0200, Krzysztof Kozlowski wrote:
> On 31/05/2022 15:50, Fabien Parent wrote:
> > Add device-tree for the MT8365 SoC. More information can be found
> > about that SoC at the following address:
> > https://www.mediatek.com/products/aiot/i350-mt8365
> > 
> > Signed-off-by: Fabien Parent <fparent@baylibre.com>
> > ---
> >  arch/arm64/boot/dts/mediatek/mt8365.dtsi | 1047
> > ++++++++++++++++++++++
> >  1 file changed, 1047 insertions(+)
> >  create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
> > 
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> > b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> > new file mode 100644
> > index 000000000000..e22b1d259418
> > --- /dev/null
> > +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> > @@ -0,0 +1,1047 @@
> > +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> > +/*
> > + * Copyright (c) 2018 MediaTek Inc.
2022?

> > + */
> > +
> > +#include <dt-bindings/clock/mediatek,mt8365-clk.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/phy/phy.h>
> > +#include <dt-bindings/power/mt8365-power.h>
> > +#include <dt-bindings/memory/mt8365-larb-port.h>
> > +#include <dt-bindings/thermal/thermal.h>
> > +
> > +/ {
> > +	compatible = "mediatek,mt8365";
> > +	interrupt-parent = <&sysirq>;
> > +	#address-cells = <2>;
> > +	#size-cells = <2>;
> > +
> > +	aliases {
> > +		ovl0 = &ovl0;
> > +		rdma0 = &rdma0;
> > +		rdma1 = &rdma1;
> > +		color0 = &color0;
> > +		ccorr0 = &ccorr0;
> > +		aal0 = &aal0;
> > +		gamma0 = &gamma0;
> > +		dither0 = &dither0;
> > +		dsi0 = &dsi0;
> > +		dpi0 = &dpi0;
> > +	};
> > +
> > +	cpus: cpus {
> > +		#address-cells = <1>;
> > +		#size-cells = <0>;
> > +
> > +		cpu-map {
> > +			cluster0: cluster0 {
> > +				core0 {
> > +					cpu = <&cpu0>;
> > +				};
> > +				core1 {
> > +					cpu = <&cpu1>;
> > +				};
> > +				core2 {
> > +					cpu = <&cpu2>;
> > +				};
> > +				core3 {
> > +					cpu = <&cpu3>;
> > +				};
> > +			};
> > +		};
> > +
> > +		cpu0: cpu@0 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x0>;
> > +			clock-frequency = <1600000000>;
> > +			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> > +				 <&apmixedsys CLK_APMIXED_MAINPLL>;
> > +			clock-names = "cpu", "intermediate";
> > +			operating-points-v2 = <&cluster0_opp>;
> > +			#cooling-cells = <2>;
> > +			enable-method = "psci";
> > +		};
> > +
> > +		cpu1: cpu@1 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x1>;
> > +			clock-frequency = <1600000000>;
> > +			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> > +				 <&apmixedsys CLK_APMIXED_MAINPLL>;
> > +			clock-names = "cpu", "intermediate", "armpll";
> > +			operating-points-v2 = <&cluster0_opp>;
> > +			#cooling-cells = <2>;
> > +			enable-method = "psci";
> > +		};
> > +
> > +		cpu2: cpu@2 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x2>;
> > +			clock-frequency = <1600000000>;
> > +			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> > +				 <&apmixedsys CLK_APMIXED_MAINPLL>;
> > +			clock-names = "cpu", "intermediate", "armpll";
> > +			operating-points-v2 = <&cluster0_opp>;
> > +			#cooling-cells = <2>;
> > +			enable-method = "psci";
> > +		};
> > +
> > +		cpu3: cpu@3 {
> > +			device_type = "cpu";
> > +			compatible = "arm,cortex-a53";
> > +			reg = <0x3>;
> > +			clock-frequency = <1600000000>;
> > +			clocks = <&mcucfg CLK_MCU_BUS_SEL>,
> > +				 <&apmixedsys CLK_APMIXED_MAINPLL>;
> > +			clock-names = "cpu", "intermediate", "armpll";
> > +			operating-points-v2 = <&cluster0_opp>;
> > +			#cooling-cells = <2>;
> > +			enable-method = "psci";
> > +		};
> > +	};
> > +
> > +	cluster0_opp: opp-table-0 {
> > +		compatible = "operating-points-v2";
> > +		opp-shared;
> > +		opp-850000000 {
> > +			opp-hz = /bits/ 64 <850000000>;
> > +			opp-microvolt = <650000>;
> > +		};
> > +		opp-918000000 {
> > +			opp-hz = /bits/ 64 <918000000>;
> > +			opp-microvolt = <668750>;
> > +		};
> > +		opp-987000000 {
> > +			opp-hz = /bits/ 64 <987000000>;
> > +			opp-microvolt = <687500>;
> > +		};
> > +		opp-1056000000 {
> > +			opp-hz = /bits/ 64 <1056000000>;
> > +			opp-microvolt = <706250>;
> > +		};
> > +		opp-1125000000 {
> > +			opp-hz = /bits/ 64 <1125000000>;
> > +			opp-microvolt = <725000>;
> > +		};
> > +		opp-1216000000 {
> > +			opp-hz = /bits/ 64 <1216000000>;
> > +			opp-microvolt = <750000>;
> > +		};
> > +		opp-1308000000 {
> > +			opp-hz = /bits/ 64 <1308000000>;
> > +			opp-microvolt = <775000>;
> > +		};
> > +		opp-1400000000 {
> > +			opp-hz = /bits/ 64 <1400000000>;
> > +			opp-microvolt = <800000>;
> > +		};
> > +		opp-1466000000 {
> > +			opp-hz = /bits/ 64 <1466000000>;
> > +			opp-microvolt = <825000>;
> > +		};
> > +		opp-1533000000 {
> > +			opp-hz = /bits/ 64 <1533000000>;
> > +			opp-microvolt = <850000>;
> > +		};
> > +		opp-1633000000 {
> > +			opp-hz = /bits/ 64 <1633000000>;
> > +			opp-microvolt = <887500>;
> > +		};
> > +		opp-1700000000 {
> > +			opp-hz = /bits/ 64 <1700000000>;
> > +			opp-microvolt = <912500>;
> > +		};
> > +		opp-1767000000 {
> > +			opp-hz = /bits/ 64 <1767000000>;
> > +			opp-microvolt = <937500>;
> > +		};
> > +		opp-1834000000 {
> > +			opp-hz = /bits/ 64 <1834000000>;
> > +			opp-microvolt = <962500>;
> > +		};
> > +		opp-1917000000 {
> > +			opp-hz = /bits/ 64 <1917000000>;
> > +			opp-microvolt = <993750>;
> > +		};
> > +		opp-2001000000 {
> > +			opp-hz = /bits/ 64 <2001000000>;
> > +			opp-microvolt = <1025000>;
> > +		};
> > +	};
> > +
> > +	clk26m: oscillator {
> > +		compatible = "fixed-clock";
> > +		#clock-cells = <0>;
> > +		clock-frequency = <26000000>;
> 
> This does not look like property of a SoC. Are you sure MT8365 SoC
> has
> this clock (not the board)?
> 
> > +		clock-output-names = "clk26m";
> > +	};
> > +
> > +	psci {
> > +		compatible = "arm,psci-1.0";
> > +		method = "smc";
> > +	};
> > +
> > +	reserved-memory {
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +		ranges;
> > +
> > +		/* 128 KiB reserved for ARM Trusted Firmware (BL31) */
> > +		bl31_secmon_reserved: secmon@43000000 {
> > +			no-map;
> > +			reg = <0 0x43000000 0 0x20000>;
> > +		};
> > +	};
> > +
> > +	soc {
> > +		#address-cells = <2>;
> > +		#size-cells = <2>;
> > +		compatible = "simple-bus";
> > +		ranges;
> > +
> > +		gic: interrupt-controller@c000000 {
> > +			compatible = "arm,gic-v3";
> > +			#interrupt-cells = <4>;
> 
> Why do you have four cells here (and passing 0 as interrupt)?
> 
> > +			interrupt-parent = <&gic>;
> > +			interrupt-controller;
> > +			reg = <0 0x0c000000 0 0x80000>,
> > +			      <0 0x0c080000 0 0x80000>;
> > +
> > +			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> > +		};
> > +
> > +		topckgen: syscon@10000000 {
> > +			compatible = "mediatek,mt8365-topckgen",
> > "syscon";
> > +			reg = <0 0x10000000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		infracfg: syscon@10001000 {
> > +			compatible = "mediatek,mt8365-infracfg",
> > "syscon";
> > +			reg = <0 0x10001000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		pericfg: syscon@10003000 {
> > +			compatible = "mediatek,mt8365-pericfg",
> > "syscon";
> > +			reg = <0 0x10003000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		syscfg_pctl: syscfg-pctl@10005000 {
> 
> This is I guess also syscon, like other nodes?
> 
> > +			compatible = "syscon";
> 
> You need specific compatible. Please run `make dtbs_check` and fix
> the
> errors.
> 
> > +			reg = <0 0x10005000 0 0x1000>;
> > +		};
> > +
> > +		scpsys: syscon@10006000 {
> > +			compatible = "syscon", "simple-mfd";
> 
> You need specific compatible.
> 
> > +			reg = <0 0x10006000 0 0x1000>;
> > +			#power-domain-cells = <1>;
> 
> This is definitely wrong now. It's not a simple-mfd device, so please
> do
> not use that property.
> 
> > +
> > +			/* System Power Manager */
> > +			spm: power-controller {
> > +				compatible = "mediatek,mt8365-power-
> > controller";
> > +				#address-cells = <1>;
> > +				#size-cells = <0>;
> > +				#power-domain-cells = <1>;
> > +
> > +				/* power domains of the SoC */
> 
> The comment suggests you will later add here power domains not for
> the
> SoC. If that's not true, just skip the comment.
> 
> > +				power-domain@MT8365_POWER_DOMAIN_MM {
> > +					reg = <MT8365_POWER_DOMAIN_MM>;
> > +					clocks = <&topckgen
> > CLK_TOP_MM_SEL>,
> > +						 <&mmsys
> > CLK_MM_MM_SMI_COMMON>,
> > +						 <&mmsys
> > CLK_MM_MM_SMI_COMM0>,
> > +						 <&mmsys
> > CLK_MM_MM_SMI_COMM1>,
> > +						 <&mmsys
> > CLK_MM_MM_SMI_LARB0>;
> > +					clock-names = "mm", "mm-0",
> > "mm-1",
> > +						      "mm-2", "mm-3";
> > +					#power-domain-cells = <0>;
> > +					mediatek,infracfg =
> > <&infracfg>;
> > +					mediatek,infracfg_nao =
> > <&infracfg_nao>;
> > +					#address-cells = <1>;
> > +					#size-cells = <0>;
> > +
> > +					power-domain@MT8365_POWER_DOMAI
> > N_CAM {
> > +						reg =
> > <MT8365_POWER_DOMAIN_CAM>;
> > +						clocks = <&camsys
> > CLK_CAM_LARB2>,
> > +							 <&camsys
> > CLK_CAM_SENIF>,
> > +							 <&camsys
> > CLK_CAMSV0>,
> > +							 <&camsys
> > CLK_CAMSV1>,
> > +							 <&camsys
> > CLK_CAM_FDVT>,
> > +							 <&camsys
> > CLK_CAM_WPE>;
> > +						clock-names = "cam-0",
> > "cam-1",
> > +							      "cam-2",
> > "cam-3",
> > +							      "cam-4",
> > "cam-5";
> > +						#power-domain-cells =
> > <0>;
> > +						mediatek,infracfg =
> > <&infracfg>;
> > +						mediatek,smi =
> > <&smi_common>;
> > +					};
> > +
> > +					power-domain@MT8365_POWER_DOMAI
> > N_VDEC {
> > +						reg =
> > <MT8365_POWER_DOMAIN_VDEC>;
> > +						#power-domain-cells =
> > <0>;
> > +						mediatek,smi =
> > <&smi_common>;
> > +					};
> > +
> > +					power-domain@MT8365_POWER_DOMAI
> > N_VENC {
> > +						reg =
> > <MT8365_POWER_DOMAIN_VENC>;
> > +						#power-domain-cells =
> > <0>;
> > +						mediatek,smi =
> > <&smi_common>;
> > +					};
> > +
> > +					power-domain@MT8365_POWER_DOMAI
> > N_APU {
> > +						reg =
> > <MT8365_POWER_DOMAIN_APU>;
> > +						clocks = <&infracfg
> > CLK_IFR_APU_AXI>,
> > +							 <&apu
> > CLK_APU_IPU_CK>,
> > +							 <&apu
> > CLK_APU_AXI>,
> > +							 <&apu
> > CLK_APU_JTAG>,
> > +							 <&apu
> > CLK_APU_IF_CK>,
> > +							 <&apu
> > CLK_APU_EDMA>,
> > +							 <&apu
> > CLK_APU_AHB>;
> > +						clock-names = "apu",
> > "apu-0",
> > +							      "apu-1",
> > "apu-2",
> > +							      "apu-3",
> > "apu-4",
> > +							      "apu-5";
> > +						#power-domain-cells =
> > <0>;
> > +						mediatek,infracfg =
> > <&infracfg>;
> > +						mediatek,smi =
> > <&smi_common>;
> > +					};
> > +				};
> > +
> > +				power-domain@MT8365_POWER_DOMAIN_CONN {
> > +					reg =
> > <MT8365_POWER_DOMAIN_CONN>;
> > +					clocks = <&topckgen
> > CLK_TOP_CONN_32K>,
> > +						 <&topckgen
> > CLK_TOP_CONN_26M>;
> > +					clock-names = "conn", "conn1";
> > +					#power-domain-cells = <0>;
> > +					mediatek,infracfg =
> > <&infracfg>;
> > +				};
> > +
> > +				power-domain@MT8365_POWER_DOMAIN_MFG {
> > +					reg =
> > <MT8365_POWER_DOMAIN_MFG>;
> > +					clocks = <&topckgen
> > CLK_TOP_MFG_SEL>;
> > +					clock-names = "mfg";
> > +					#power-domain-cells = <0>;
> > +					mediatek,infracfg =
> > <&infracfg>;
> > +				};
> > +
> > +				power-domain@MT8365_POWER_DOMAIN_AUDIO
> > {
> > +					reg =
> > <MT8365_POWER_DOMAIN_AUDIO>;
> > +					clocks = <&topckgen
> > CLK_TOP_AUD_INTBUS_SEL>,
> > +						 <&infracfg
> > CLK_IFR_AUDIO>,
> > +						 <&infracfg
> > CLK_IFR_AUD_26M_BK>;
> > +					clock-names = "audio",
> > "audio1", "audio2";
> > +					#power-domain-cells = <0>;
> > +					mediatek,infracfg =
> > <&infracfg>;
> > +				};
> > +
> > +				power-domain@MT8365_POWER_DOMAIN_DSP {
> > +					reg =
> > <MT8365_POWER_DOMAIN_DSP>;
> > +					clocks = <&topckgen
> > CLK_TOP_DSP_SEL>,
> > +						 <&topckgen
> > CLK_TOP_DSP_26M>;
> > +					clock-names = "dsp", "dsp1";
> > +					#power-domain-cells = <0>;
> > +					mediatek,infracfg =
> > <&infracfg>;
> > +				};
> > +			};
> > +		};
> > +
> > +		watchdog: watchdog@10007000 {
> > +			compatible = "mediatek,mt8365-wdt",
> > +				     "mediatek,mt6589-wdt";
> > +			reg = <0 0x10007000 0 0x100>;
> > +			#reset-cells = <1>;
> > +		};
> > +
> > +		gpt: apxgpt@10008000 {
> 
> Generic node names, so "timer"
> 
> > +			compatible = "mediatek,mt8365-timer",
> > +				     "mediatek,mt6577-timer";
> > +			reg = <0 0x10008000 0 0x1000>;
> > +			interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&topckgen CLK_TOP_SYS_26M_D2>;
> > +			clock-names = "clk13m";
> > +		};
> > +
> > +		pio: pinctrl@1000b000 {
> > +			compatible = "mediatek,mt8365-pinctrl";
> > +			reg = <0 0x1000b000 0 0x1000>;
> > +			mediatek,pctl-regmap = <&syscfg_pctl>;
> > +			pins-are-numbered;
> > +			gpio-controller;
> > +			#gpio-cells = <2>;
> > +			interrupt-controller;
> > +			#interrupt-cells = <2>;
> > +			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> > +		};
> > +
> > +		apmixedsys: syscon@1000c000 {
> > +			compatible = "mediatek,mt8365-apmixedsys",
> > "syscon";
> > +			reg = <0 0x1000c000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		pwrap: pwrap@1000d000 {
> > +			compatible = "mediatek,mt8365-pwrap";
> > +			reg = <0 0x1000d000 0 0x1000>;
> > +			reg-names = "pwrap";
> > +			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&infracfg CLK_IFR_PWRAP_SPI>,
> > +				 <&infracfg CLK_IFR_PMIC_AP>,
> > +				 <&infracfg CLK_IFR_PWRAP_SYS>,
> > +				 <&infracfg CLK_IFR_PWRAP_TMR>;
> > +			clock-names = "spi", "wrap", "sys", "tmr";
> > +		};
> > +
> > +		keypad: kp@10010000 {
> 
> s/kp/keypad/
> 
> > +			compatible = "mediatek,mt6779-keypad";
> > +			reg = <0 0x10010000 0 0x1000>;
> > +			wakeup-source;
> > +			interrupts = <GIC_SPI 124
> > IRQ_TYPE_EDGE_FALLING>;
> > +			clocks = <&clk26m>;
> > +			clock-names = "kpd";
> > +			status = "disabled";
> > +		};
> > +
> > +		mcucfg: syscon@10200000 {
> > +			compatible = "mediatek,mt8365-mcucfg",
> > "syscon";
> > +			reg = <0 0x10200000 0 0x2000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		sysirq: intpol-controller@10200a80 {
> 
> interrupt-controller
> 
> > +			compatible = "mediatek,mt8365-sysirq",
> > +				     "mediatek,mt6577-sysirq";
> > +			interrupt-controller;
> > +			#interrupt-cells = <3>;
> > +			interrupt-parent = <&gic>;
> > +			reg = <0 0x10200a80 0 0x20>;
> > +		};
> > +
> > +		iommu: iommu@10205000 {
> > +			compatible = "mediatek,mt8365-m4u";
> > +			reg = <0 0x10205000 0 0x1000>;
> > +			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_LOW>;
> > +			mediatek,larbs = <&larb0>, <&larb1>, <&larb2>,
> > <&larb3>;
> > +			#iommu-cells = <1>;
> > +		};
> > +
> > +		infracfg_nao: infracfg-nao@1020e000 {
> 
> Other nodes are named syscon
> 
> > +			compatible = "syscon";
> 
> No, syscon cannot be alone.
> 
> > +			reg = <0 0x1020e000 0 0x1000>;
> > +		};
> > +
> > +		rng: rng@1020f000 {
> > +			compatible = "mediatek,mt8365-rng",
> > +				     "mediatek,mt7623-rng";
> > +			reg = <0 0x1020f000 0 0x100>;
> > +			clocks = <&infracfg CLK_IFR_TRNG>;
> > +			clock-names = "rng";
> > +		};
> > +
> > +		apdma: dma-controller@11000280 {
> > +			compatible = "mediatek,mt8365-uart-dma",
> > +				     "mediatek,mt6577-uart-dma";
> > +			reg = <0 0x11000280 0 0x80>,
> > +			      <0 0x11000300 0 0x80>,
> > +			      <0 0x11000380 0 0x80>,
> > +			      <0 0x11000400 0 0x80>,
> > +			      <0 0x11000580 0 0x80>,
> > +			      <0 0x11000600 0 0x80>;
> > +			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
> > +				     <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
> > +				     <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
> > +				     <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
> > +				     <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
> > +				     <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
> > +			dma-requests = <6>;
> > +			clocks = <&infracfg CLK_IFR_AP_DMA>;
> > +			clock-names = "apdma";
> > +			#dma-cells = <1>;
> > +		};
> > +
> > +		auxadc: adc@11001000 {
> > +			compatible = "mediatek,mt8365-auxadc",
> > +				     "mediatek,mt8173-auxadc";
> > +			reg = <0 0x11001000 0 0x1000>;
> > +			clocks = <&infracfg CLK_IFR_AUXADC>;
> > +			clock-names = "main";
> > +			#io-channel-cells = <1>;
> > +		};
> > +
> > +		uart0: serial@11002000 {
> > +			compatible = "mediatek,mt8365-uart",
> > +				     "mediatek,mt6577-uart";
> > +			reg = <0 0x11002000 0 0x1000>;
> > +			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
> > +			clock-names = "baud", "bus";
> > +			dmas = <&apdma 0
> > +				&apdma 1>;
> 
> You need to split these into two phandles.
> 
> > +			dma-names = "tx", "rx";
> > +			status = "disabled";
> > +		};
> > +
> > +		uart1: serial@11003000 {
> > +			compatible = "mediatek,mt8365-uart",
> > +				     "mediatek,mt6577-uart";
> > +			reg = <0 0x11003000 0 0x1000>;
> > +			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
> > +			clock-names = "baud", "bus";
> > +			dmas = <&apdma 2
> > +				&apdma 3>;
> 
> Ditto.
> 
> > +			dma-names = "tx", "rx";
> > +			status = "disabled";
> > +		};
> > +
> > +		uart2: serial@11004000 {
> > +			compatible = "mediatek,mt8365-uart",
> > +				     "mediatek,mt6577-uart";
> > +			reg = <0 0x11004000 0 0x1000>;
> > +			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
> > +			clock-names = "baud", "bus";
> > +			dmas = <&apdma 4
> > +				&apdma 5>;
> > +			dma-names = "tx", "rx";
> > +			status = "disabled";
> > +		};
> > +
> > +		pwm: pwm@11006000 {
> > +			compatible = "mediatek,mt8365-pwm";
> > +			reg = <0 0x11006000 0 0x1000>;
> > +			#pwm-cells = <2>;
> > +			interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&infracfg CLK_IFR_PWM_HCLK>,
> > +				 <&infracfg CLK_IFR_PWM>,
> > +				 <&infracfg CLK_IFR_PWM1>,
> > +				 <&infracfg CLK_IFR_PWM2>,
> > +				 <&infracfg CLK_IFR_PWM3>;
> > +			clock-names = "top", "main", "pwm1", "pwm2",
> > "pwm3";
> > +		};
> > +
> > +		i2c0: i2c@11007000 {
> > +			compatible = "mediatek,mt8365-i2c",
> > +				     "mediatek,mt8168-i2c";
> > +			reg = <0 0x11007000 0 0xa0>,
> > +			      <0 0x11000080 0 0x80>;
> > +			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
> > +			clock-div = <1>;
> > +			clocks = <&infracfg CLK_IFR_I2C0_AXI>,
> > +				 <&infracfg CLK_IFR_AP_DMA>;
> > +			clock-names = "main", "dma";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			status = "disabled";
> > +		};
> > +
> > +		i2c1: i2c@11008000 {
> > +			compatible = "mediatek,mt8365-i2c",
> > +				     "mediatek,mt8168-i2c";
> > +			reg = <0 0x11008000 0 0xa0>,
> > +			      <0 0x11000100 0 0x80>;
> > +			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
> > +			clock-div = <1>;
> > +			clocks = <&infracfg CLK_IFR_I2C1_AXI>,
> > +				 <&infracfg CLK_IFR_AP_DMA>;
> > +			clock-names = "main", "dma";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			status = "disabled";
> > +		};
> > +
> > +		i2c2: i2c@11009000 {
> > +			compatible = "mediatek,mt8365-i2c",
> > +				     "mediatek,mt8168-i2c";
> > +			reg = <0 0x11009000 0 0xa0>,
> > +			      <0 0x11000180 0 0x80>;
> > +			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
> > +			clock-div = <1>;
> > +			clocks = <&infracfg CLK_IFR_I2C2_AXI>,
> > +				 <&infracfg CLK_IFR_AP_DMA>;
> > +			clock-names = "main", "dma";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			status = "disabled";
> > +		};
> > +
> > +		spi: spi@1100a000 {
> > +			compatible = "mediatek,mt8365-spi",
> > +				     "mediatek,mt7622-spi";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			reg = <0 0x1100a000 0 0x100>;
> 
> Reg goes after compatible.
> 
> > +			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
> > +				 <&topckgen CLK_TOP_SPI_SEL>,
> > +				 <&infracfg CLK_IFR_SPI0>;
> > +			clock-names = "parent-clk", "sel-clk", "spi-
> > clk";
> > +			status = "disabled";
> > +		};
> > +
> > +		thermal: thermal@1100b000 {
> > +			compatible = "mediatek,mt8365-thermal";
> > +			reg = <0 0x1100b000 0 0x1000>;
> > +			interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&infracfg CLK_IFR_THERM>,
> > +				 <&infracfg CLK_IFR_AUXADC>;
> > +			clock-names = "therm", "auxadc";
> > +			mediatek,auxadc = <&auxadc>;
> > +			mediatek,apmixedsys = <&apmixedsys>;
> > +			nvmem-cells = <&thermal_calibration>;
> > +			nvmem-cell-names = "calibration-data";
> > +			#thermal-sensor-cells = <1>;
> > +		};
> > +
> > +		disp_pwm: disp-pwm@1100e000 {
> 
> Generic node names, so "pwm"
> 
> > +			compatible = "mediatek,mt8365-disp-pwm",
> > +				     "mediatek,mt8183-disp-pwm";
> > +			reg = <0 0x1100e000 0 0x1000>;
> > +			#pwm-cells = <2>;
> > +			clocks = <&topckgen CLK_TOP_DISP_PWM_SEL>,
> > +				 <&infracfg CLK_IFR_DISP_PWM>;
> > +			clock-names = "main", "mm";
> > +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> > +			status = "disabled";
> > +		};
> > +
> > +		i2c3: i2c@1100f000 {
> > +			compatible = "mediatek,mt8365-i2c",
> > +				     "mediatek,mt8168-i2c";
> > +			reg = <0 0x1100f000 0 0xa0>,
> > +			      <0 0x11000200 0 0x80>;
> > +			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
> > +			clock-div = <1>;
> > +			clocks = <&infracfg CLK_IFR_I2C3_AXI>,
> > +				 <&infracfg CLK_IFR_AP_DMA>;
> > +			clock-names = "main", "dma";
> > +			#address-cells = <1>;
> > +			#size-cells = <0>;
> > +			status = "disabled";
> > +		};
> > +
> > +		ssusb: usb@11201000 {
> > +			compatible = "mediatek,mt8365-mtu3",
> > "mediatek,mtu3";
> > +			reg = <0 0x11201000 0 0x2e00>,
> > +			      <0 0x11203e00 0 0x0100>;
> > +			reg-names = "mac", "ippc";
> > +			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
> > +			phys = <&u2port0 PHY_TYPE_USB2>,
> > +			       <&u2port1 PHY_TYPE_USB2>;
> > +			clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
> > +				 <&infracfg CLK_IFR_SSUSB_REF>,
> > +				 <&infracfg CLK_IFR_SSUSB_SYS>,
> > +				 <&infracfg CLK_IFR_ICUSB>;
> > +			clock-names = "sys_ck", "ref_ck", "mcu_ck",
> > +				      "dma_ck";
> > +			#address-cells = <2>;
> > +			#size-cells = <2>;
> > +			ranges;
> > +			status = "disabled";
> > +
> > +			usb_host: usb@11200000 {
> > +				compatible = "mediatek,mt8365-xhci",
> > +					     "mediatek,mtk-xhci";
> > +				reg = <0 0x11200000 0 0x1000>;
> > +				reg-names = "mac";
> > +				interrupts = <GIC_SPI 67
> > IRQ_TYPE_LEVEL_LOW>;
> > +				clocks = <&topckgen
> > CLK_TOP_SSUSB_TOP_CK_EN>,
> > +					 <&infracfg CLK_IFR_SSUSB_REF>,
> > +					 <&infracfg CLK_IFR_SSUSB_SYS>,
> > +					 <&infracfg CLK_IFR_ICUSB>,
> > +					 <&infracfg
> > CLK_IFR_SSUSB_XHCI>;
> > +				clock-names = "sys_ck", "ref_ck",
> > "mcu_ck",
> > +					      "dma_ck", "xhci_ck";
> > +				status = "disabled";
> > +			};
> > +		};
> > +
> > +		mmc0: mmc@11230000 {
> > +			compatible = "mediatek,mt8365-mmc",
> > "mediatek,mt8183-mmc";
> > +			reg = <0 0x11230000 0 0x1000>,
> > +			      <0 0x11cd0000 0 0x1000>;
> > +			interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
> > +				 <&infracfg CLK_IFR_MSDC0_HCLK>,
> > +				 <&infracfg CLK_IFR_MSDC0_SRC>;
> > +			clock-names = "source", "hclk", "source_cg";
> > +			status = "disabled";
> > +		};
> > +
> > +		mmc1: mmc@11240000 {
> > +			compatible = "mediatek,mt8365-mmc",
> > "mediatek,mt8183-mmc";
> > +			reg = <0 0x11240000 0 0x1000>,
> > +			      <0 0x11c90000 0 0x1000>;
> > +			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
> > +			clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
> > +				 <&infracfg CLK_IFR_MSDC1_HCLK>,
> > +				 <&infracfg CLK_IFR_MSDC1_SRC>;
> > +			clock-names = "source", "hclk", "source_cg";
> > +			status = "disabled";
> > +		};
> > +
> > +		ethernet: ethernet@112a0000 {
> > +			compatible = "mediatek,mt8365-eth";
> > +			reg = <0 0x112a0000 0 0x1000>;
> > +			mediatek,pericfg = <&infracfg>;
> > +			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> > +			clocks = <&topckgen CLK_TOP_ETH_SEL>,
> > +				 <&infracfg CLK_IFR_NIC_AXI>,
> > +				 <&infracfg CLK_IFR_NIC_SLV_AXI>;
> > +			clock-names = "core", "reg", "trans";
> > +			status = "disabled";
> > +		};
> > +
> > +		mipi_tx0: dsi-phy@11c00000 {
> > +			compatible = "mediatek,mt8365-mipi-tx",
> > +				     "mediatek,mt8183-mipi-tx";
> > +			reg = <0 0x11c00000 0 0x800>;
> > +			clocks = <&clk26m>;
> > +			clock-names = "ref_clk";
> > +			#clock-cells = <0>;
> > +			#phy-cells = <0>;
> > +			clock-output-names = "mipi_tx0_pll";
> > +		};
> > +
> > +		efuse: efuse@11c50000 {
> > +			compatible = "mediatek,mt8365-efuse",
> > "mediatek,efuse";
> > +			reg = <0 0x11c50000 0 0x1000>;
> > +			#address-cells = <1>;
> > +			#size-cells = <1>;
> > +
> > +			thermal_calibration: calib@180 {
> > +				reg = <0x180 0xc>;
> > +			};
> > +		};
> > +
> > +		u3phy: t-phy@11cc0000 {
> 
> s/t-phy/phy/
> 
> > +			compatible = "mediatek,mt8365-tphy",
> > +				     "mediatek,generic-tphy-v2";
> > +			#address-cells = <2>;
> > +			#phy-cells = <1>;
remove #phy-cells, it's only used in subnode;

> 
> address-cells, then size, then phy
> 
> > +			#size-cells = <2>;
> > +			ranges;
Prefer to use ranges with value

> > +			status = "okay";
> 
> No need for status ok.
> 
> > +
> > +			u2port0: usb-phy@11cc0000 {
> > +				reg = <0 0x11cc0000 0 0x400>;
> > +				clocks = <&topckgen
> > CLK_TOP_SSUSB_PHY_CK_EN>,
> > +					 <&topckgen
> > CLK_TOP_USB20_48M_EN>;
> > +				clock-names = "ref", "da_ref";
> > +				#phy-cells = <1>;
> > +				status = "okay";
> 
> Ditto
> 
> > +			};
> > +
> > +			u2port1: usb-phy@11cc1000 {
> > +				reg = <0 0x11cc1000 0 0x400>;
> > +				clocks = <&topckgen
> > CLK_TOP_SSUSB_PHY_CK_EN>,
> > +					 <&topckgen
> > CLK_TOP_USB20_48M_EN>;
> > +				clock-names = "ref", "da_ref";
> > +				#phy-cells = <1>;
> > +				status = "okay";
> > +			};
> > +		};
> > +
> > +		mfgcfg: syscon@13000000 {
> > +			compatible = "mediatek,mt8365-mfgcfg",
> > "syscon";
> > +			reg = <0 0x13000000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		mmsys: syscon@14000000 {
> > +			compatible = "mediatek,mt8365-mmsys", "syscon";
> > +			reg = <0 0x14000000 0 0x1000>;
> > +			#clock-cells = <1>;
> > +		};
> > +
> > +		mutex: mutex@14001000 {
> > +			compatible =  "mediatek,mt8365-disp-mutex";
> > +			reg = <0 0x14001000 0 0x1000>;
> > +			interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_LOW>;
> > +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> > +		};
> > +
> > +		smi_common: smi@14002000 {
> 
> s/smi/memory-controller/ in node name?
> 
> > +			compatible = "mediatek,mt8365-smi-common",
> > +				     "mediatek,mt8186-smi-common";
> > +			reg = <0 0x14002000 0 0x1000>;
> > +			clocks = <&mmsys CLK_MM_MM_SMI_COMMON>,
> > +				 <&mmsys CLK_MM_MM_SMI_COMMON>,
> > +				 <&mmsys CLK_MM_MM_SMI_COMM0>,
> > +				 <&mmsys CLK_MM_MM_SMI_COMM1>;
> > +			clock-names = "apb", "smi", "gals0", "gals1";
> > +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> > +		};
> > +
> > +		larb0: larb@14003000 {
> 
> The same?
> 
> > +			compatible = "mediatek,mt8365-smi-larb",
> > +				     "mediatek,mt8186-smi-larb";
> > +			reg = <0 0x14003000 0 0x1000>;
> > +			mediatek,smi = <&smi_common>;
> > +			clocks = <&mmsys CLK_MM_MM_SMI_LARB0>,
> > +				 <&mmsys CLK_MM_MM_SMI_LARB0>;
> > +			clock-names = "apb", "smi";
> > +			power-domains = <&spm MT8365_POWER_DOMAIN_MM>;
> 
> 
> 
> Best regards,
> Krzysztof


^ permalink raw reply	[flat|nested] 44+ messages in thread

end of thread, other threads:[~2022-09-22  2:55 UTC | newest]

Thread overview: 44+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-05-31 13:50 [PATCH 00/17] Add support for MT8365 EVK board Fabien Parent
2022-05-31 13:50 ` [PATCH 01/17] dt-bindings: i2c: i2c-mt65xx: add binding for MT8365 SoC Fabien Parent
2022-06-01  9:34   ` Krzysztof Kozlowski
2022-05-31 13:50 ` [PATCH 02/17] dt-bindings: memory: add mt8365 SoC binding documentation Fabien Parent
2022-06-01  9:34   ` Krzysztof Kozlowski
2022-05-31 13:50 ` [PATCH 03/17] dt-bindings: mmc: mtk-sd: add bindings for MT8365 SoC Fabien Parent
2022-06-01  9:35   ` Krzysztof Kozlowski
2022-05-31 13:50 ` [PATCH 04/17] dt-bindings: arm: mediatek: Add binding for mt8365-evk board Fabien Parent
2022-06-01  9:36   ` Krzysztof Kozlowski
2022-05-31 13:50 ` [PATCH 05/17] dt-bindings: dma: mediatek,uart-dma: add MT8365 bindings Fabien Parent
2022-06-01  9:36   ` Krzysztof Kozlowski
2022-06-09  5:56   ` Vinod Koul
2022-05-31 13:50 ` [PATCH 06/17] dt-bindings: iio: adc: mediatek: add MT8365 SoC bindings Fabien Parent
2022-06-01 10:01   ` Krzysztof Kozlowski
2022-05-31 13:50 ` [PATCH 07/17] dt-bindings: nvmem: mediatek,efuse: add MT8365 bindings Fabien Parent
2022-06-01 10:01   ` Krzysztof Kozlowski
2022-05-31 13:50 ` [PATCH 08/17] dt-bindings: watchdog: mtk-wdt: Add MT8365 SoC bindings Fabien Parent
2022-06-01 10:03   ` Krzysztof Kozlowski
2022-05-31 13:50 ` [PATCH 09/17] dt-bindings: spi: mt65xx: add " Fabien Parent
2022-06-01 10:02   ` Krzysztof Kozlowski
2022-05-31 13:50 ` [PATCH 10/17] dt-bindings: serial: mediatek: add MT8365 bindings Fabien Parent
2022-06-01 10:12   ` Krzysztof Kozlowski
2022-05-31 13:50 ` [PATCH 11/17] dt-bindings: phy: mediatek,dsi-phy: Add MT8365 SoC bindings Fabien Parent
2022-06-01 10:13   ` Krzysztof Kozlowski
2022-06-09  5:58   ` Vinod Koul
2022-05-31 13:50 ` [PATCH 12/17] dt-bindings: phy: mediatek,tphy: add " Fabien Parent
2022-06-01 10:13   ` Krzysztof Kozlowski
2022-05-31 13:50 ` [PATCH 13/17] dt-bindings: usb: mediatek,mtu3: " Fabien Parent
2022-06-01 10:14   ` Krzysztof Kozlowski
2022-05-31 13:50 ` [PATCH 14/17] dt-bindings: usb: mediatek,mtk-xhci: " Fabien Parent
2022-06-01 10:14   ` Krzysztof Kozlowski
2022-05-31 13:50 ` [PATCH 15/17] arm64: dts: mediatek: add mt6357 device-tree Fabien Parent
2022-06-01 10:15   ` Krzysztof Kozlowski
2022-05-31 13:50 ` [PATCH 16/17] arm64: dts: mediatek: add mt8365 device-tree Fabien Parent
2022-06-01 10:37   ` Krzysztof Kozlowski
2022-09-22  2:49     ` Chunfeng Yun
2022-09-22  2:54     ` Chunfeng Yun
2022-07-20 13:12   ` Amjad Ouled-Ameur
2022-09-14 13:27     ` Amjad Ouled-Ameur
2022-07-26  9:57   ` Amjad Ouled-Ameur
2022-05-31 13:50 ` [PATCH 17/17] arm64: dts: mediatek: add mt8365-evk board device-tree Fabien Parent
2022-06-01 10:41   ` Krzysztof Kozlowski
2022-06-01  9:32 ` [PATCH 00/17] Add support for MT8365 EVK board Krzysztof Kozlowski
2022-06-07 10:46 ` (subset) " Mark Brown

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).