Linux-Watchdog Archive on lore.kernel.org
 help / color / Atom feed
* [RFCv2 0/9] dt-bindings: first tentative of conversion to yaml format
@ 2019-08-05 12:03 Neil Armstrong
  2019-08-05 12:03 ` [RFCv2 9/9] dt-bindings: watchdog: meson-gxbb-wdt: convert to yaml Neil Armstrong
  2019-08-05 21:51 ` [RFCv2 0/9] dt-bindings: first tentative of conversion to yaml format Rob Herring
  0 siblings, 2 replies; 5+ messages in thread
From: Neil Armstrong @ 2019-08-05 12:03 UTC (permalink / raw)
  To: robh+dt
  Cc: Neil Armstrong, linux-amlogic, linux-crypto, linux-serial,
	linux-spi, linux-watchdog, linux-arm-kernel, devicetree,
	jassisinghbrar, kishon, p.zabel

This is a first tentative to convert some of the simplest Amlogic
dt-bindings to the yaml format.

All have been tested using :
$ make ARCH=arm64 dtbs_check

Issues with the amlogic arm64 DTs has already been identified thanks
to the validation scripts. The DT fixes will be pushed once these yaml
bindings are acked.

Changes since rfc v1:
- Fixed bindings according to Rob's comments
- Added commit log
- renamed yaml files using amlogic prefix

Neil Armstrong (9):
  dt-bindings: mailbox: meson-mhu: convert to yaml
  dt-bindings: rng: amlogic,meson-rng: convert to yaml
  dt-bindings: spi: meson: convert to yaml
  dt-bindings: reset: amlogic,meson-reset: convert to yaml
  dt-bindings: arm: amlogic: amlogic,meson-gx-ao-secure: convert to yaml
  dt-bindings: phy: meson-g12a-usb2-phy: convert to yaml
  dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml
  dt-bindings: serial: meson-uart: convert to yaml
  dt-bindings: watchdog: meson-gxbb-wdt: convert to yaml

 .../amlogic/amlogic,meson-gx-ao-secure.txt    | 28 -------
 .../amlogic/amlogic,meson-gx-ao-secure.yaml   | 52 +++++++++++++
 .../mailbox/amlogic,meson-gxbb-mhu.yaml       | 53 ++++++++++++++
 .../devicetree/bindings/mailbox/meson-mhu.txt | 34 ---------
 .../phy/amlogic,meson-g12a-usb2-phy.yaml      | 63 ++++++++++++++++
 .../phy/amlogic,meson-g12a-usb3-pcie-phy.yaml | 57 +++++++++++++++
 .../bindings/phy/meson-g12a-usb2-phy.txt      | 22 ------
 .../bindings/phy/meson-g12a-usb3-pcie-phy.txt | 22 ------
 .../bindings/reset/amlogic,meson-reset.txt    | 19 -----
 .../bindings/reset/amlogic,meson-reset.yaml   | 37 ++++++++++
 .../bindings/rng/amlogic,meson-rng.txt        | 21 ------
 .../bindings/rng/amlogic,meson-rng.yaml       | 37 ++++++++++
 .../bindings/serial/amlogic,meson-uart.txt    | 38 ----------
 .../bindings/serial/amlogic,meson-uart.yaml   | 73 +++++++++++++++++++
 .../bindings/spi/amlogic,meson-gx-spicc.yaml  | 67 +++++++++++++++++
 .../bindings/spi/amlogic,meson6-spifc.yaml    | 53 ++++++++++++++
 .../devicetree/bindings/spi/spi-meson.txt     | 55 --------------
 .../watchdog/amlogic,meson-gxbb-wdt.yaml      | 37 ++++++++++
 .../bindings/watchdog/meson-gxbb-wdt.txt      | 16 ----
 19 files changed, 529 insertions(+), 255 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.txt
 create mode 100644 Documentation/devicetree/bindings/arm/amlogic/amlogic,meson-gx-ao-secure.yaml
 create mode 100644 Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml
 delete mode 100644 Documentation/devicetree/bindings/mailbox/meson-mhu.txt
 create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
 create mode 100644 Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb3-pcie-phy.yaml
 delete mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb2-phy.txt
 delete mode 100644 Documentation/devicetree/bindings/phy/meson-g12a-usb3-pcie-phy.txt
 delete mode 100644 Documentation/devicetree/bindings/reset/amlogic,meson-reset.txt
 create mode 100644 Documentation/devicetree/bindings/reset/amlogic,meson-reset.yaml
 delete mode 100644 Documentation/devicetree/bindings/rng/amlogic,meson-rng.txt
 create mode 100644 Documentation/devicetree/bindings/rng/amlogic,meson-rng.yaml
 delete mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson-uart.txt
 create mode 100644 Documentation/devicetree/bindings/serial/amlogic,meson-uart.yaml
 create mode 100644 Documentation/devicetree/bindings/spi/amlogic,meson-gx-spicc.yaml
 create mode 100644 Documentation/devicetree/bindings/spi/amlogic,meson6-spifc.yaml
 delete mode 100644 Documentation/devicetree/bindings/spi/spi-meson.txt
 create mode 100644 Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
 delete mode 100644 Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt

-- 
2.22.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* [RFCv2 9/9] dt-bindings: watchdog: meson-gxbb-wdt: convert to yaml
  2019-08-05 12:03 [RFCv2 0/9] dt-bindings: first tentative of conversion to yaml format Neil Armstrong
@ 2019-08-05 12:03 ` Neil Armstrong
  2019-08-07 17:59   ` Guenter Roeck
  2019-08-05 21:51 ` [RFCv2 0/9] dt-bindings: first tentative of conversion to yaml format Rob Herring
  1 sibling, 1 reply; 5+ messages in thread
From: Neil Armstrong @ 2019-08-05 12:03 UTC (permalink / raw)
  To: robh+dt
  Cc: Neil Armstrong, linux-amlogic, linux-watchdog, linux-arm-kernel,
	devicetree

Now that we have the DT validation in place, let's convert the device tree
bindings for the Amlogic GXBB Watchdog timer over to a YAML schemas.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
---
 .../watchdog/amlogic,meson-gxbb-wdt.yaml      | 37 +++++++++++++++++++
 .../bindings/watchdog/meson-gxbb-wdt.txt      | 16 --------
 2 files changed, 37 insertions(+), 16 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
 delete mode 100644 Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt

diff --git a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
new file mode 100644
index 000000000000..d7352f709b37
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/watchdog/amlogic,meson-gxbb-wdt.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Meson GXBB SoCs Watchdog timer
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gxbb-wdt
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+    description:
+      A phandle to the clock of this PHY
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+examples:
+  - |
+    watchdog@98d0 {
+          compatible = "amlogic,meson-gxbb-wdt";
+          reg = <0x98d0 0x10>;
+          clocks = <&xtal>;
+    };
diff --git a/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
deleted file mode 100644
index c7fe36fa739c..000000000000
--- a/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-Meson GXBB SoCs Watchdog timer
-
-Required properties:
-
-- compatible : should be "amlogic,meson-gxbb-wdt"
-- reg : Specifies base physical address and size of the registers.
-- clocks : Should be a phandle to the Watchdog clock source, for GXBB the xtal
-	   is the default clock source.
-
-Example:
-
-wdt: watchdog@98d0 {
-	compatible = "amlogic,meson-gxbb-wdt";
-	reg = <0 0x98d0 0x0 0x10>;
-	clocks = <&xtal>;
-};
-- 
2.22.0


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [RFCv2 0/9] dt-bindings: first tentative of conversion to yaml format
  2019-08-05 12:03 [RFCv2 0/9] dt-bindings: first tentative of conversion to yaml format Neil Armstrong
  2019-08-05 12:03 ` [RFCv2 9/9] dt-bindings: watchdog: meson-gxbb-wdt: convert to yaml Neil Armstrong
@ 2019-08-05 21:51 ` Rob Herring
  2019-08-06  7:42   ` Neil Armstrong
  1 sibling, 1 reply; 5+ messages in thread
From: Rob Herring @ 2019-08-05 21:51 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: linux-amlogic, open list:HARDWARE RANDOM NUMBER GENERATOR CORE,
	open list:SERIAL DRIVERS, linux-spi, LINUX-WATCHDOG,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	devicetree, Jassi Brar, Kishon Vijay Abraham I, Philipp Zabel

On Mon, Aug 5, 2019 at 6:03 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>
> This is a first tentative to convert some of the simplest Amlogic
> dt-bindings to the yaml format.
>
> All have been tested using :
> $ make ARCH=arm64 dtbs_check
>
> Issues with the amlogic arm64 DTs has already been identified thanks
> to the validation scripts. The DT fixes will be pushed once these yaml
> bindings are acked.
>
> Changes since rfc v1:
> - Fixed bindings according to Rob's comments
> - Added commit log
> - renamed yaml files using amlogic prefix
>
> Neil Armstrong (9):
>   dt-bindings: mailbox: meson-mhu: convert to yaml
>   dt-bindings: rng: amlogic,meson-rng: convert to yaml
>   dt-bindings: spi: meson: convert to yaml
>   dt-bindings: reset: amlogic,meson-reset: convert to yaml
>   dt-bindings: arm: amlogic: amlogic,meson-gx-ao-secure: convert to yaml
>   dt-bindings: phy: meson-g12a-usb2-phy: convert to yaml
>   dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml
>   dt-bindings: serial: meson-uart: convert to yaml
>   dt-bindings: watchdog: meson-gxbb-wdt: convert to yaml

For the series,

Reviewed-by: Rob Herring <robh@kernel.org>

What's your merge plan? Do you want me to take the whole series?

Rob

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [RFCv2 0/9] dt-bindings: first tentative of conversion to yaml format
  2019-08-05 21:51 ` [RFCv2 0/9] dt-bindings: first tentative of conversion to yaml format Rob Herring
@ 2019-08-06  7:42   ` Neil Armstrong
  0 siblings, 0 replies; 5+ messages in thread
From: Neil Armstrong @ 2019-08-06  7:42 UTC (permalink / raw)
  To: Rob Herring
  Cc: linux-amlogic, open list:HARDWARE RANDOM NUMBER GENERATOR CORE,
	open list:SERIAL DRIVERS, linux-spi, LINUX-WATCHDOG,
	moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE,
	devicetree, Jassi Brar, Kishon Vijay Abraham I, Philipp Zabel

Hi Rob,

On 05/08/2019 23:51, Rob Herring wrote:
> On Mon, Aug 5, 2019 at 6:03 AM Neil Armstrong <narmstrong@baylibre.com> wrote:
>>
>> This is a first tentative to convert some of the simplest Amlogic
>> dt-bindings to the yaml format.
>>
>> All have been tested using :
>> $ make ARCH=arm64 dtbs_check
>>
>> Issues with the amlogic arm64 DTs has already been identified thanks
>> to the validation scripts. The DT fixes will be pushed once these yaml
>> bindings are acked.
>>
>> Changes since rfc v1:
>> - Fixed bindings according to Rob's comments
>> - Added commit log
>> - renamed yaml files using amlogic prefix
>>
>> Neil Armstrong (9):
>>   dt-bindings: mailbox: meson-mhu: convert to yaml
>>   dt-bindings: rng: amlogic,meson-rng: convert to yaml
>>   dt-bindings: spi: meson: convert to yaml
>>   dt-bindings: reset: amlogic,meson-reset: convert to yaml
>>   dt-bindings: arm: amlogic: amlogic,meson-gx-ao-secure: convert to yaml
>>   dt-bindings: phy: meson-g12a-usb2-phy: convert to yaml
>>   dt-bindings: phy: meson-g12a-usb3-pcie-phy: convert to yaml
>>   dt-bindings: serial: meson-uart: convert to yaml
>>   dt-bindings: watchdog: meson-gxbb-wdt: convert to yaml
> 
> For the series,
> 
> Reviewed-by: Rob Herring <robh@kernel.org>
> 
> What's your merge plan? Do you want me to take the whole series?

I planned to split them for each subsystem, but it may be much simpler
if you take the whole serie.

Neil

> 
> Rob
> 


^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [RFCv2 9/9] dt-bindings: watchdog: meson-gxbb-wdt: convert to yaml
  2019-08-05 12:03 ` [RFCv2 9/9] dt-bindings: watchdog: meson-gxbb-wdt: convert to yaml Neil Armstrong
@ 2019-08-07 17:59   ` Guenter Roeck
  0 siblings, 0 replies; 5+ messages in thread
From: Guenter Roeck @ 2019-08-07 17:59 UTC (permalink / raw)
  To: Neil Armstrong
  Cc: robh+dt, linux-amlogic, linux-watchdog, linux-arm-kernel, devicetree

On Mon, Aug 05, 2019 at 02:03:20PM +0200, Neil Armstrong wrote:
> Now that we have the DT validation in place, let's convert the device tree
> bindings for the Amlogic GXBB Watchdog timer over to a YAML schemas.
> 
> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

Reviewed-by: Guenter Roeck <linux@roeck-us.net>

> ---
>  .../watchdog/amlogic,meson-gxbb-wdt.yaml      | 37 +++++++++++++++++++
>  .../bindings/watchdog/meson-gxbb-wdt.txt      | 16 --------
>  2 files changed, 37 insertions(+), 16 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
>  delete mode 100644 Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
> 
> diff --git a/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
> new file mode 100644
> index 000000000000..d7352f709b37
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/amlogic,meson-gxbb-wdt.yaml
> @@ -0,0 +1,37 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019 BayLibre, SAS
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/watchdog/amlogic,meson-gxbb-wdt.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Meson GXBB SoCs Watchdog timer
> +
> +maintainers:
> +  - Neil Armstrong <narmstrong@baylibre.com>
> +
> +properties:
> +  compatible:
> +    enum:
> +      - amlogic,meson-gxbb-wdt
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +    description:
> +      A phandle to the clock of this PHY
> +
> +required:
> +  - compatible
> +  - reg
> +  - clocks
> +
> +examples:
> +  - |
> +    watchdog@98d0 {
> +          compatible = "amlogic,meson-gxbb-wdt";
> +          reg = <0x98d0 0x10>;
> +          clocks = <&xtal>;
> +    };
> diff --git a/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
> deleted file mode 100644
> index c7fe36fa739c..000000000000
> --- a/Documentation/devicetree/bindings/watchdog/meson-gxbb-wdt.txt
> +++ /dev/null
> @@ -1,16 +0,0 @@
> -Meson GXBB SoCs Watchdog timer
> -
> -Required properties:
> -
> -- compatible : should be "amlogic,meson-gxbb-wdt"
> -- reg : Specifies base physical address and size of the registers.
> -- clocks : Should be a phandle to the Watchdog clock source, for GXBB the xtal
> -	   is the default clock source.
> -
> -Example:
> -
> -wdt: watchdog@98d0 {
> -	compatible = "amlogic,meson-gxbb-wdt";
> -	reg = <0 0x98d0 0x0 0x10>;
> -	clocks = <&xtal>;
> -};

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, back to index

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-08-05 12:03 [RFCv2 0/9] dt-bindings: first tentative of conversion to yaml format Neil Armstrong
2019-08-05 12:03 ` [RFCv2 9/9] dt-bindings: watchdog: meson-gxbb-wdt: convert to yaml Neil Armstrong
2019-08-07 17:59   ` Guenter Roeck
2019-08-05 21:51 ` [RFCv2 0/9] dt-bindings: first tentative of conversion to yaml format Rob Herring
2019-08-06  7:42   ` Neil Armstrong

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org linux-watchdog@archiver.kernel.org
	public-inbox-index linux-watchdog


Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/ public-inbox