[PATCH 0/3] watchdog: Add window watchdog driver

[PATCH 0/3] watchdog: Add window watchdog driver

[Srinivas Neeli]

This patch series:
- Add xilinx window watchdog binding document.
- Add versal window watchdog feature.
- Add MAINTAINERS fragment for xilinx watchdog drivers.

Srinivas Neeli (3):
  watchdog: bindings: xlnx,versal-wwdt: Add binding documentation for
    xilinx window watchdog device
  watchdog: xilinx_wwdt: Add Versal Window watchdog mode
  MAINTAINERS: Add fragment for xilinx watchdog drivers

 .../bindings/watchdog/xlnx,versal-wwdt.yaml   |  71 ++++
 MAINTAINERS                                   |  10 +
 drivers/watchdog/Kconfig                      |  16 +
 drivers/watchdog/Makefile                     |   1 +
 drivers/watchdog/xilinx_wwdt.c                | 382 ++++++++++++++++++
 5 files changed, 480 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml
 create mode 100644 drivers/watchdog/xilinx_wwdt.c

-- 
2.22.0

[PATCH 1/3] watchdog: bindings: xlnx,versal-wwdt: Add binding documentation for xilinx window watchdog device

[Srinivas Neeli]

Add documentation for the binding of Window watchdog device.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
---
 .../bindings/watchdog/xlnx,versal-wwdt.yaml   | 71 +++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml

diff --git a/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml b/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml
new file mode 100644
index 000000000000..ca03ee9db9fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/xlnx,versal-wwdt.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx Versal Window Watchdog Timer Controller
+
+maintainers:
+  - Neeli Srinivas <sneeli@xilinx.com>
+
+description:
+  Versal watchdog driver uses Window watchdog mode. Window watchdog
+  timer(WWDT) contains closed(first) and open(second) window with
+  32 bit width. WWDT will generate an interrupt after the first window
+  timeout and reset signal after the second window timeout. Timeout
+  and pretimeout configuration, Stop and Refresh trigger only in open
+  window.
+
+properties:
+  compatible:
+    enum:
+      - xlnx,versal-wwdt-1.0
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  timeout-sec: true
+
+  pretimeout-sec: true
+
+  interrupts:
+    items:
+      - description: Watchdog interrupt
+      - description: Watchdog reset pending interrupt
+    description:
+      Interrupt line names "wdt" or "wwdt_reset_pending".
+      wdt - will assert high after first (closed) window
+      timer expires. wwdt_reset_pending - will assert high
+      after second (open) window timer expires if WRP
+      (Watchdog Reset pending) is configured with third
+      (SST) timer.
+
+  interrupt-names:
+    items:
+      - const: wdt
+      - const: wwdt_reset_pending
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+        watchdog@fd4d0000 {
+           compatible = "xlnx,versal-wwdt-1.0";
+           reg = <0xfd4d0000 0x10000>;
+           clocks = <&clock25>;
+           timeout-sec = <30>;
+           pretimeout-sec = <25>;
+           interrupts = <0 0x64 1>, <0 0x6D 1>;
+           interrupt-names = "wdt", "wwdt_reset_pending";
+        };
+...
-- 
2.22.0

[PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window watchdog mode

[Srinivas Neeli]

Versal watchdog driver uses Window watchdog mode. Window watchdog
timer(WWDT) contains closed(first) and open(second) window with
32 bit width. WWDT will generate an interrupt after the first window
timeout and reset signal after the second window timeout. Timeout
and Pre-timeout configuration, Stop and Refresh trigger only in open
window.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
---
 drivers/watchdog/Kconfig       |  16 ++
 drivers/watchdog/Makefile      |   1 +
 drivers/watchdog/xilinx_wwdt.c | 382 +++++++++++++++++++++++++++++++++
 3 files changed, 399 insertions(+)
 create mode 100644 drivers/watchdog/xilinx_wwdt.c

diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 355100dad60a..2ed17f278783 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -307,6 +307,22 @@ config XILINX_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called of_xilinx_wdt.
 
+config XILINX_WINDOW_WATCHDOG
+	tristate "Xilinx Window Watchdog timer"
+	depends on HAS_IOMEM
+	select WATCHDOG_CORE
+	help
+	  Window Watchdog driver for the versal_wwdt ip core.
+	  Window watchdog timer(WWDT) contains closed(first) and
+	  open(second) window with 32 bit width. WWDT will generate
+	  an interrupt after the first window timeout and reset
+	  signal after the second window timeout. Timeout and
+	  Pre-timeout configuration, Stop and Refresh trigger
+	  only in open window.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called xilinx_wwdt.
+
 config ZIIRAVE_WATCHDOG
 	tristate "Zodiac RAVE Watchdog Timer"
 	depends on I2C
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index a7eade8b4d45..97d10c3d39c7 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -148,6 +148,7 @@ obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o
 
 # MicroBlaze Architecture
 obj-$(CONFIG_XILINX_WATCHDOG) += of_xilinx_wdt.o
+obj-$(CONFIG_XILINX_WINDOW_WATCHDOG) += xilinx_wwdt.o
 
 # MIPS Architecture
 obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
diff --git a/drivers/watchdog/xilinx_wwdt.c b/drivers/watchdog/xilinx_wwdt.c
new file mode 100644
index 000000000000..8fa2cb2225e8
--- /dev/null
+++ b/drivers/watchdog/xilinx_wwdt.c
@@ -0,0 +1,382 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Window Watchdog Device Driver for Xilinx Versal WWDT
+ *
+ * (C) Copyright 2021 Xilinx, Inc.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/of_device.h>
+#include <linux/of_address.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+
+#define XWWDT_DEFAULT_TIMEOUT	40
+#define XWWDT_MIN_TIMEOUT	1
+#define XWWDT_MAX_TIMEOUT	42
+
+/* Register offsets for the WWdt device */
+#define XWWDT_MWR_OFFSET	0x00
+#define XWWDT_ESR_OFFSET	0x04
+#define XWWDT_FCR_OFFSET	0x08
+#define XWWDT_FWR_OFFSET	0x0c
+#define XWWDT_SWR_OFFSET	0x10
+
+/* Master Write Control Register Masks */
+#define XWWDT_MWR_MASK		BIT(0)
+
+/* Enable and Status Register Masks */
+#define XWWDT_ESR_WINT_MASK	BIT(16)
+#define XWWDT_ESR_WSW_MASK	BIT(8)
+#define XWWDT_ESR_WEN_MASK	BIT(0)
+
+/* Function control Register Masks */
+#define XWWDT_SBC_MASK		0xFF00
+#define XWWDT_SBC_SHIFT		16
+#define XWWDT_BSS_MASK		0xC0
+
+static int wwdt_timeout;
+
+module_param(wwdt_timeout, int, 0644);
+MODULE_PARM_DESC(wwdt_timeout,
+		 "Watchdog time in seconds. (default="
+		 __MODULE_STRING(XWWDT_DEFAULT_TIMEOUT) ")");
+
+struct xwwdt_device {
+	void __iomem *base;
+	spinlock_t spinlock; /* spinlock for register handling */
+	struct watchdog_device xilinx_wwdt_wdd;
+	struct clk *clk;
+	int irq;
+};
+
+static int is_wwdt_in_closed_window(struct watchdog_device *wdd)
+{
+	u32 control_status_reg;
+	struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
+
+	spin_lock(&xdev->spinlock);
+	control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
+	spin_unlock(&xdev->spinlock);
+	if (control_status_reg & XWWDT_ESR_WEN_MASK)
+		if (!(control_status_reg & XWWDT_ESR_WSW_MASK))
+			return 0;
+
+	return 1;
+}
+
+static int xilinx_wwdt_start(struct watchdog_device *wdd)
+{
+	struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
+	struct watchdog_device *xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
+	u64 time_out, pre_timeout, count;
+	u32 control_status_reg, fcr;
+	int ret;
+
+	count = clk_get_rate(xdev->clk);
+	if (!count)
+		return -EINVAL;
+
+	/* Calculate timeout count */
+	pre_timeout = count * wdd->pretimeout;
+	time_out = count * wdd->timeout;
+	if (!watchdog_active(xilinx_wwdt_wdd)) {
+		ret  = clk_enable(xdev->clk);
+		if (ret) {
+			dev_err(wdd->parent, "Failed to enable clock\n");
+			return ret;
+		}
+	}
+
+	spin_lock(&xdev->spinlock);
+	iowrite32(XWWDT_MWR_MASK, xdev->base + XWWDT_MWR_OFFSET);
+	iowrite32(~(u32)XWWDT_ESR_WEN_MASK,
+		  xdev->base + XWWDT_ESR_OFFSET);
+
+	if (pre_timeout) {
+		iowrite32((u32)(time_out - pre_timeout),
+			  xdev->base + XWWDT_FWR_OFFSET);
+		iowrite32((u32)pre_timeout, xdev->base + XWWDT_SWR_OFFSET);
+		fcr = ioread32(xdev->base + XWWDT_SWR_OFFSET);
+		fcr = (fcr >> XWWDT_SBC_SHIFT) & XWWDT_SBC_MASK;
+		fcr = fcr | XWWDT_BSS_MASK;
+		iowrite32(fcr, xdev->base + XWWDT_FCR_OFFSET);
+	} else {
+		iowrite32((u32)pre_timeout,
+			  xdev->base + XWWDT_FWR_OFFSET);
+		iowrite32((u32)time_out, xdev->base + XWWDT_SWR_OFFSET);
+		iowrite32(0x0, xdev->base + XWWDT_FCR_OFFSET);
+	}
+
+	/* Enable the window watchdog timer */
+	control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
+	control_status_reg |= XWWDT_ESR_WEN_MASK;
+	iowrite32(control_status_reg, xdev->base + XWWDT_ESR_OFFSET);
+
+	spin_unlock(&xdev->spinlock);
+
+	dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Started!\n");
+
+	return 0;
+}
+
+static int xilinx_wwdt_stop(struct watchdog_device *wdd)
+{
+	struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
+	struct watchdog_device *xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
+
+	if (!is_wwdt_in_closed_window(wdd)) {
+		dev_warn(xilinx_wwdt_wdd->parent, "timer in closed window");
+		return -EINVAL;
+	}
+
+	spin_lock(&xdev->spinlock);
+
+	iowrite32(XWWDT_MWR_MASK, xdev->base + XWWDT_MWR_OFFSET);
+	/* Disable the Window watchdog timer */
+	iowrite32(~(u32)XWWDT_ESR_WEN_MASK,
+		  xdev->base + XWWDT_ESR_OFFSET);
+
+	spin_unlock(&xdev->spinlock);
+
+	if (watchdog_active(xilinx_wwdt_wdd))
+		clk_disable(xdev->clk);
+
+	dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Stopped!\n");
+
+	return 0;
+}
+
+static int xilinx_wwdt_keepalive(struct watchdog_device *wdd)
+{
+	u32 control_status_reg;
+	struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
+
+	/* Refresh in open window is ignored */
+	if (!is_wwdt_in_closed_window(wdd))
+		return 0;
+
+	spin_lock(&xdev->spinlock);
+
+	iowrite32(XWWDT_MWR_MASK, xdev->base + XWWDT_MWR_OFFSET);
+	control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
+	control_status_reg |= XWWDT_ESR_WINT_MASK;
+	control_status_reg &= ~XWWDT_ESR_WSW_MASK;
+	iowrite32(control_status_reg, xdev->base + XWWDT_ESR_OFFSET);
+	control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
+	control_status_reg |= XWWDT_ESR_WSW_MASK;
+	iowrite32(control_status_reg, xdev->base + XWWDT_ESR_OFFSET);
+
+	spin_unlock(&xdev->spinlock);
+
+	return 0;
+}
+
+static int xilinx_wwdt_set_timeout(struct watchdog_device *wdd,
+				   unsigned int new_time)
+{
+	u32 ret = 0;
+	struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
+	struct watchdog_device *xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
+
+	if (!is_wwdt_in_closed_window(wdd)) {
+		dev_warn(xilinx_wwdt_wdd->parent, "timer in closed window");
+		return -EINVAL;
+	}
+
+	if (new_time < XWWDT_MIN_TIMEOUT ||
+	    new_time > XWWDT_MAX_TIMEOUT) {
+		dev_warn(xilinx_wwdt_wdd->parent,
+			 "timeout value must be %d<=x<=%d, using %d\n",
+			 XWWDT_MIN_TIMEOUT,
+			 XWWDT_MAX_TIMEOUT, new_time);
+		return -EINVAL;
+	}
+
+	wdd->timeout = new_time;
+	wdd->pretimeout = 0;
+
+	if (watchdog_active(xilinx_wwdt_wdd)) {
+		ret = xilinx_wwdt_start(wdd);
+		if (ret)
+			dev_dbg(xilinx_wwdt_wdd->parent, "timer start failed");
+	}
+
+	return ret;
+}
+
+static int xilinx_wwdt_set_pretimeout(struct watchdog_device *wdd,
+				      u32 new_pretimeout)
+{
+	u32 ret = 0;
+	struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
+	struct watchdog_device *xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
+
+	if (!is_wwdt_in_closed_window(wdd)) {
+		dev_warn(xilinx_wwdt_wdd->parent, "timer in closed window");
+		return -EINVAL;
+	}
+
+	if (new_pretimeout < wdd->min_timeout ||
+	    new_pretimeout >= wdd->timeout)
+		return -EINVAL;
+
+	wdd->pretimeout = new_pretimeout;
+
+	if (watchdog_active(xilinx_wwdt_wdd)) {
+		ret = xilinx_wwdt_start(wdd);
+		if (ret)
+			dev_dbg(xilinx_wwdt_wdd->parent, "timer start failed");
+	}
+
+	return ret;
+}
+
+static void xwwdt_clk_disable_unprepare(void *data)
+{
+	clk_disable_unprepare(data);
+}
+
+static irqreturn_t xilinx_wwdt_isr(int irq, void *wdog_arg)
+{
+	struct xwwdt_device *xdev = wdog_arg;
+
+	watchdog_notify_pretimeout(&xdev->xilinx_wwdt_wdd);
+
+	return IRQ_HANDLED;
+}
+
+static const struct watchdog_info xilinx_wwdt_ident = {
+	.options = WDIOF_MAGICCLOSE |
+		   WDIOF_KEEPALIVEPING |
+		   WDIOF_SETTIMEOUT,
+	.firmware_version = 1,
+	.identity = "xlnx_window watchdog",
+};
+
+static const struct watchdog_info xilinx_wwdt_pretimeout_ident = {
+	.options = WDIOF_MAGICCLOSE |
+		   WDIOF_KEEPALIVEPING |
+		   WDIOF_PRETIMEOUT |
+		   WDIOF_SETTIMEOUT,
+	.firmware_version = 1,
+	.identity = "xlnx_window watchdog",
+};
+
+static const struct watchdog_ops xilinx_wwdt_ops = {
+	.owner = THIS_MODULE,
+	.start = xilinx_wwdt_start,
+	.stop = xilinx_wwdt_stop,
+	.ping = xilinx_wwdt_keepalive,
+	.set_timeout = xilinx_wwdt_set_timeout,
+	.set_pretimeout = xilinx_wwdt_set_pretimeout,
+};
+
+static int xwwdt_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct watchdog_device *xilinx_wwdt_wdd;
+	struct xwwdt_device *xdev;
+	u32 pre_timeout = 0;
+	int ret;
+
+	xdev = devm_kzalloc(dev, sizeof(*xdev), GFP_KERNEL);
+	if (!xdev)
+		return -ENOMEM;
+
+	xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
+	xilinx_wwdt_wdd->info = &xilinx_wwdt_ident;
+	xilinx_wwdt_wdd->ops = &xilinx_wwdt_ops;
+	xilinx_wwdt_wdd->parent = dev;
+
+	xdev->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(xdev->base))
+		return PTR_ERR(xdev->base);
+
+	ret = of_property_read_u32(dev->of_node, "pretimeout-sec",
+				   &pre_timeout);
+	if (ret)
+		dev_dbg(dev,
+			"Parameter \"pretimeout-sec\" not found\n");
+
+	xdev->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(xdev->clk))
+		return PTR_ERR(xdev->clk);
+
+	ret = clk_get_rate(xdev->clk);
+	if (!ret)
+		return -EINVAL;
+
+	ret = clk_prepare_enable(xdev->clk);
+	if (ret) {
+		dev_err(dev, "unable to enable clock\n");
+		return ret;
+	}
+	ret = devm_add_action_or_reset(dev, xwwdt_clk_disable_unprepare,
+				       xdev->clk);
+	if (ret)
+		goto err_clk_disable;
+
+	xilinx_wwdt_wdd->pretimeout = pre_timeout;
+	xilinx_wwdt_wdd->timeout = XWWDT_DEFAULT_TIMEOUT;
+	xilinx_wwdt_wdd->min_timeout = XWWDT_MIN_TIMEOUT;
+	xilinx_wwdt_wdd->max_timeout = XWWDT_MAX_TIMEOUT;
+
+	xdev->irq = platform_get_irq_byname(pdev, "wdt");
+	if (xdev->irq < 0) {
+		ret = xdev->irq;
+		goto err_clk_disable;
+	}
+
+	if (!devm_request_irq(dev, xdev->irq, xilinx_wwdt_isr,
+			      0, dev_name(dev), xdev)) {
+		xilinx_wwdt_wdd->info = &xilinx_wwdt_pretimeout_ident;
+	}
+
+	ret = watchdog_init_timeout(xilinx_wwdt_wdd,
+				    wwdt_timeout, &pdev->dev);
+	if (ret)
+		dev_info(&pdev->dev, "Configured default timeout value\n");
+
+	spin_lock_init(&xdev->spinlock);
+	watchdog_set_drvdata(xilinx_wwdt_wdd, xdev);
+
+	ret = devm_watchdog_register_device(dev, xilinx_wwdt_wdd);
+	if (ret)
+		goto err_clk_disable;
+
+	clk_disable_unprepare(xdev->clk);
+
+	dev_info(dev, "Xilinx Window Watchdog Timer with timeout %ds\n",
+		 xilinx_wwdt_wdd->timeout);
+
+	return 0;
+
+err_clk_disable:
+	clk_disable_unprepare(xdev->clk);
+	return ret;
+}
+
+/* Mat for of_platform binding */
+static const struct of_device_id xwwdt_of_match[] = {
+	{ .compatible = "xlnx,versal-wwdt-1.0", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, xwwdt_of_match);
+
+static struct platform_driver xwwdt_driver = {
+	.probe = xwwdt_probe,
+	.driver = {
+		.name = "Xilinx Window Watchdog",
+		.of_match_table = xwwdt_of_match,
+	},
+};
+
+module_platform_driver(xwwdt_driver);
+
+MODULE_AUTHOR("Neeli Srinivas <sneeli@xilinx.com>");
+MODULE_DESCRIPTION("Xilinx Window Watchdog driver");
+MODULE_LICENSE("GPL");
-- 
2.22.0

Re: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window watchdog mode

[Guenter Roeck]

The subject is confusing. This patch does not add "Versal Window watchdog mode",
it adds a driver which supports the Versal Window watchdog. The subject should
be something like "watchdog: Add Versal Window watchdog driver".

On 5/27/21 2:57 AM, Srinivas Neeli wrote:
> Versal watchdog driver uses Window watchdog mode. Window watchdog
> timer(WWDT) contains closed(first) and open(second) window with
> 32 bit width. WWDT will generate an interrupt after the first window
> timeout and reset signal after the second window timeout. Timeout
> and Pre-timeout configuration, Stop and Refresh trigger only in open
> window.

Does that mean that userspace can not send a keepalive before the pretimeout
expires ? That is not how this is supposed to work. If that is the case,
this is not a pretimeout. Pretimeout is supposed to be used for emergency
handling, such as triggering a crash dump. The above description as well
as the code suggests that an interrupt is all but mandatory.

Assuming that is all the case, ie that keepalive is only possible
after the interrupt was received, and that timeout updates are also
only possible after an interrupt was received, one possible handling would
to record that a keepalive was received, and to record that a request to
update the timeout was received if that happens while the window
is closed. Then, when the interrupt is received, those actions can be
applied. Otherwise, if there was no keepalive request prior to the interrupt,
the interrupt handler would call watchdog_notify_pretimeout().

Of course, this is all just guesswork.

More comments below.

Guenter

> 
> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
> ---
>   drivers/watchdog/Kconfig       |  16 ++
>   drivers/watchdog/Makefile      |   1 +
>   drivers/watchdog/xilinx_wwdt.c | 382 +++++++++++++++++++++++++++++++++
>   3 files changed, 399 insertions(+)
>   create mode 100644 drivers/watchdog/xilinx_wwdt.c
> 
> diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> index 355100dad60a..2ed17f278783 100644
> --- a/drivers/watchdog/Kconfig
> +++ b/drivers/watchdog/Kconfig
> @@ -307,6 +307,22 @@ config XILINX_WATCHDOG
>   	  To compile this driver as a module, choose M here: the
>   	  module will be called of_xilinx_wdt.
>   
> +config XILINX_WINDOW_WATCHDOG
> +	tristate "Xilinx Window Watchdog timer"
> +	depends on HAS_IOMEM
> +	select WATCHDOG_CORE
> +	help
> +	  Window Watchdog driver for the versal_wwdt ip core.
> +	  Window watchdog timer(WWDT) contains closed(first) and
> +	  open(second) window with 32 bit width. WWDT will generate
> +	  an interrupt after the first window timeout and reset
> +	  signal after the second window timeout. Timeout and
> +	  Pre-timeout configuration, Stop and Refresh trigger
> +	  only in open window.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called xilinx_wwdt.
> +
>   config ZIIRAVE_WATCHDOG
>   	tristate "Zodiac RAVE Watchdog Timer"
>   	depends on I2C
> diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> index a7eade8b4d45..97d10c3d39c7 100644
> --- a/drivers/watchdog/Makefile
> +++ b/drivers/watchdog/Makefile
> @@ -148,6 +148,7 @@ obj-$(CONFIG_M54xx_WATCHDOG) += m54xx_wdt.o
>   
>   # MicroBlaze Architecture
>   obj-$(CONFIG_XILINX_WATCHDOG) += of_xilinx_wdt.o
> +obj-$(CONFIG_XILINX_WINDOW_WATCHDOG) += xilinx_wwdt.o
>   
>   # MIPS Architecture
>   obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o
> diff --git a/drivers/watchdog/xilinx_wwdt.c b/drivers/watchdog/xilinx_wwdt.c
> new file mode 100644
> index 000000000000..8fa2cb2225e8
> --- /dev/null
> +++ b/drivers/watchdog/xilinx_wwdt.c
> @@ -0,0 +1,382 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Window Watchdog Device Driver for Xilinx Versal WWDT
> + *
> + * (C) Copyright 2021 Xilinx, Inc.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/ioport.h>
> +#include <linux/of_device.h>
> +#include <linux/of_address.h>
> +#include <linux/module.h>
> +#include <linux/watchdog.h>
> +
> +#define XWWDT_DEFAULT_TIMEOUT	40
> +#define XWWDT_MIN_TIMEOUT	1
> +#define XWWDT_MAX_TIMEOUT	42
> +
> +/* Register offsets for the WWdt device */
> +#define XWWDT_MWR_OFFSET	0x00
> +#define XWWDT_ESR_OFFSET	0x04
> +#define XWWDT_FCR_OFFSET	0x08
> +#define XWWDT_FWR_OFFSET	0x0c
> +#define XWWDT_SWR_OFFSET	0x10
> +
> +/* Master Write Control Register Masks */
> +#define XWWDT_MWR_MASK		BIT(0)
> +
> +/* Enable and Status Register Masks */
> +#define XWWDT_ESR_WINT_MASK	BIT(16)
> +#define XWWDT_ESR_WSW_MASK	BIT(8)
> +#define XWWDT_ESR_WEN_MASK	BIT(0)
> +
> +/* Function control Register Masks */
> +#define XWWDT_SBC_MASK		0xFF00
> +#define XWWDT_SBC_SHIFT		16
> +#define XWWDT_BSS_MASK		0xC0
> +
> +static int wwdt_timeout;
> +
> +module_param(wwdt_timeout, int, 0644);
> +MODULE_PARM_DESC(wwdt_timeout,
> +		 "Watchdog time in seconds. (default="
> +		 __MODULE_STRING(XWWDT_DEFAULT_TIMEOUT) ")");
> +
> +struct xwwdt_device {
> +	void __iomem *base;
> +	spinlock_t spinlock; /* spinlock for register handling */
> +	struct watchdog_device xilinx_wwdt_wdd;
> +	struct clk *clk;
> +	int irq;
> +};
> +
> +static int is_wwdt_in_closed_window(struct watchdog_device *wdd)

should return bool

> +{
> +	u32 control_status_reg;
> +	struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> +
> +	spin_lock(&xdev->spinlock);
> +	control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
> +	spin_unlock(&xdev->spinlock);
> +	if (control_status_reg & XWWDT_ESR_WEN_MASK)
> +		if (!(control_status_reg & XWWDT_ESR_WSW_MASK))
> +			return 0;
> +
> +	return 1;

Can be written as expresion without if statement

> +}
> +
> +static int xilinx_wwdt_start(struct watchdog_device *wdd)
> +{
> +	struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> +	struct watchdog_device *xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
> +	u64 time_out, pre_timeout, count;
> +	u32 control_status_reg, fcr;
> +	int ret;
> +
> +	count = clk_get_rate(xdev->clk);
> +	if (!count)
> +		return -EINVAL;
> +
Is there a reason to believe that the clock rate can change ?
If not I would suggest to read it once and store it in struct xwwdt_device.

> +	/* Calculate timeout count */
> +	pre_timeout = count * wdd->pretimeout;
> +	time_out = count * wdd->timeout;
> +	if (!watchdog_active(xilinx_wwdt_wdd)) {
> +		ret  = clk_enable(xdev->clk);

This is at the very least confusing.
The last action in the probe function is to call clk_disable_unprepare(),
meaning the clock should not be prepared here. How can it be enabled
without being prepared ?

> +		if (ret) {
> +			dev_err(wdd->parent, "Failed to enable clock\n");
> +			return ret;
> +		}
> +	}
> +
I think it would be better to separate the functions to start/stop the clock
from the function to update/enable the watchdog. The use of watchdog_active()
combined with clk_enable/clk_disable/clk_prepare_enable/clk_disable_unprepare
is confusing and makes it all but impossible to review the driver.

> +	spin_lock(&xdev->spinlock);
> +	iowrite32(XWWDT_MWR_MASK, xdev->base + XWWDT_MWR_OFFSET);
> +	iowrite32(~(u32)XWWDT_ESR_WEN_MASK,
> +		  xdev->base + XWWDT_ESR_OFFSET);
> +
> +	if (pre_timeout) {
> +		iowrite32((u32)(time_out - pre_timeout),
> +			  xdev->base + XWWDT_FWR_OFFSET);
> +		iowrite32((u32)pre_timeout, xdev->base + XWWDT_SWR_OFFSET);
> +		fcr = ioread32(xdev->base + XWWDT_SWR_OFFSET);
> +		fcr = (fcr >> XWWDT_SBC_SHIFT) & XWWDT_SBC_MASK;
> +		fcr = fcr | XWWDT_BSS_MASK;
> +		iowrite32(fcr, xdev->base + XWWDT_FCR_OFFSET);
> +	} else {
> +		iowrite32((u32)pre_timeout,
> +			  xdev->base + XWWDT_FWR_OFFSET);
> +		iowrite32((u32)time_out, xdev->base + XWWDT_SWR_OFFSET);
> +		iowrite32(0x0, xdev->base + XWWDT_FCR_OFFSET);
> +	}
> +
> +	/* Enable the window watchdog timer */
> +	control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
> +	control_status_reg |= XWWDT_ESR_WEN_MASK;
> +	iowrite32(control_status_reg, xdev->base + XWWDT_ESR_OFFSET);
> +
> +	spin_unlock(&xdev->spinlock);
> +
> +	dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Started!\n");
> +
> +	return 0;
> +}
> +
> +static int xilinx_wwdt_stop(struct watchdog_device *wdd)
> +{
> +	struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> +	struct watchdog_device *xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
> +
> +	if (!is_wwdt_in_closed_window(wdd)) {
> +		dev_warn(xilinx_wwdt_wdd->parent, "timer in closed window");
> +		return -EINVAL;
> +	}
> +
> +	spin_lock(&xdev->spinlock);
> +
> +	iowrite32(XWWDT_MWR_MASK, xdev->base + XWWDT_MWR_OFFSET);
> +	/* Disable the Window watchdog timer */
> +	iowrite32(~(u32)XWWDT_ESR_WEN_MASK,
> +		  xdev->base + XWWDT_ESR_OFFSET);
> +
> +	spin_unlock(&xdev->spinlock);
> +
> +	if (watchdog_active(xilinx_wwdt_wdd))
> +		clk_disable(xdev->clk);
> +

The stop function won't be called if the watchdog is not running,
ie if watchdog_active() returns false.
I don't undeerstand the logic of clock handling in this driver.
More on that below.

> +	dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Stopped!\n");
> +
> +	return 0;
> +}
> +
> +static int xilinx_wwdt_keepalive(struct watchdog_device *wdd)
> +{
> +	u32 control_status_reg;
> +	struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> +
> +	/* Refresh in open window is ignored */
> +	if (!is_wwdt_in_closed_window(wdd))
> +		return 0;
> +
This is dangerous. There is no reason for userspace to adhere to these restrictions.

> +	spin_lock(&xdev->spinlock);
> +
> +	iowrite32(XWWDT_MWR_MASK, xdev->base + XWWDT_MWR_OFFSET);
> +	control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
> +	control_status_reg |= XWWDT_ESR_WINT_MASK;
> +	control_status_reg &= ~XWWDT_ESR_WSW_MASK;
> +	iowrite32(control_status_reg, xdev->base + XWWDT_ESR_OFFSET);
> +	control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
> +	control_status_reg |= XWWDT_ESR_WSW_MASK;
> +	iowrite32(control_status_reg, xdev->base + XWWDT_ESR_OFFSET);
> +
> +	spin_unlock(&xdev->spinlock);
> +
> +	return 0;
> +}
> +
> +static int xilinx_wwdt_set_timeout(struct watchdog_device *wdd,
> +				   unsigned int new_time)
> +{
> +	u32 ret = 0;
> +	struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> +	struct watchdog_device *xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
> +
> +	if (!is_wwdt_in_closed_window(wdd)) {
> +		dev_warn(xilinx_wwdt_wdd->parent, "timer in closed window");
> +		return -EINVAL;
> +	}
> +

So userspace can clog the log by continuously trying to set the
timeout ?

Also, again, this is dangerous. Userspace does not know the window size.


> +	if (new_time < XWWDT_MIN_TIMEOUT ||
> +	    new_time > XWWDT_MAX_TIMEOUT) {
> +		dev_warn(xilinx_wwdt_wdd->parent,
> +			 "timeout value must be %d<=x<=%d, using %d\n",
> +			 XWWDT_MIN_TIMEOUT,
> +			 XWWDT_MAX_TIMEOUT, new_time);
> +		return -EINVAL;
> +	}

This is handled by the watchdog core.

> +
> +	wdd->timeout = new_time;
> +	wdd->pretimeout = 0;
> +
> +	if (watchdog_active(xilinx_wwdt_wdd)) {
> +		ret = xilinx_wwdt_start(wdd);
> +		if (ret)
> +			dev_dbg(xilinx_wwdt_wdd->parent, "timer start failed");
> +	}
> +
> +	return ret;
> +}
> +
> +static int xilinx_wwdt_set_pretimeout(struct watchdog_device *wdd,
> +				      u32 new_pretimeout)
> +{
> +	u32 ret = 0;
> +	struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> +	struct watchdog_device *xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
> +
> +	if (!is_wwdt_in_closed_window(wdd)) {
> +		dev_warn(xilinx_wwdt_wdd->parent, "timer in closed window");
> +		return -EINVAL;
> +	}

This restriction is not only dangerous but confusing, and simply
unacceptable. Userspace will get -EINVAL with no idea what is wrong.
A watchdog daemon will bail out for no good reason.

> +
> +	if (new_pretimeout < wdd->min_timeout ||
> +	    new_pretimeout >= wdd->timeout)
> +		return -EINVAL;
> +
This is handled by the watchdog core.

> +	wdd->pretimeout = new_pretimeout;
> +
> +	if (watchdog_active(xilinx_wwdt_wdd)) {
> +		ret = xilinx_wwdt_start(wdd);
> +		if (ret)
> +			dev_dbg(xilinx_wwdt_wdd->parent, "timer start failed");
> +	}
> +
> +	return ret;
> +}
> +
> +static void xwwdt_clk_disable_unprepare(void *data)
> +{
> +	clk_disable_unprepare(data);
> +}
> +
> +static irqreturn_t xilinx_wwdt_isr(int irq, void *wdog_arg)
> +{
> +	struct xwwdt_device *xdev = wdog_arg;
> +
> +	watchdog_notify_pretimeout(&xdev->xilinx_wwdt_wdd);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static const struct watchdog_info xilinx_wwdt_ident = {
> +	.options = WDIOF_MAGICCLOSE |
> +		   WDIOF_KEEPALIVEPING |
> +		   WDIOF_SETTIMEOUT,
> +	.firmware_version = 1,
> +	.identity = "xlnx_window watchdog",
> +};
> +
> +static const struct watchdog_info xilinx_wwdt_pretimeout_ident = {
> +	.options = WDIOF_MAGICCLOSE |
> +		   WDIOF_KEEPALIVEPING |
> +		   WDIOF_PRETIMEOUT |
> +		   WDIOF_SETTIMEOUT,
> +	.firmware_version = 1,
> +	.identity = "xlnx_window watchdog",
> +};
> +
> +static const struct watchdog_ops xilinx_wwdt_ops = {
> +	.owner = THIS_MODULE,
> +	.start = xilinx_wwdt_start,
> +	.stop = xilinx_wwdt_stop,
> +	.ping = xilinx_wwdt_keepalive,
> +	.set_timeout = xilinx_wwdt_set_timeout,
> +	.set_pretimeout = xilinx_wwdt_set_pretimeout,
> +};
> +
> +static int xwwdt_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct watchdog_device *xilinx_wwdt_wdd;
> +	struct xwwdt_device *xdev;
> +	u32 pre_timeout = 0;
> +	int ret;
> +
> +	xdev = devm_kzalloc(dev, sizeof(*xdev), GFP_KERNEL);
> +	if (!xdev)
> +		return -ENOMEM;
> +
> +	xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
> +	xilinx_wwdt_wdd->info = &xilinx_wwdt_ident;
> +	xilinx_wwdt_wdd->ops = &xilinx_wwdt_ops;
> +	xilinx_wwdt_wdd->parent = dev;
> +
> +	xdev->base = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(xdev->base))
> +		return PTR_ERR(xdev->base);
> +
> +	ret = of_property_read_u32(dev->of_node, "pretimeout-sec",
> +				   &pre_timeout);
> +	if (ret)
> +		dev_dbg(dev,
> +			"Parameter \"pretimeout-sec\" not found\n");
> +
> +	xdev->clk = devm_clk_get(dev, NULL);
> +	if (IS_ERR(xdev->clk))
> +		return PTR_ERR(xdev->clk);
> +
> +	ret = clk_get_rate(xdev->clk);
> +	if (!ret)
> +		return -EINVAL;
> +
> +	ret = clk_prepare_enable(xdev->clk);
> +	if (ret) {
> +		dev_err(dev, "unable to enable clock\n");
> +		return ret;
> +	}
> +	ret = devm_add_action_or_reset(dev, xwwdt_clk_disable_unprepare,
> +				       xdev->clk);
> +	if (ret)
> +		goto err_clk_disable;
> +

Seems pointless. What happens when you unload the driver ?

> +	xilinx_wwdt_wdd->pretimeout = pre_timeout;
> +	xilinx_wwdt_wdd->timeout = XWWDT_DEFAULT_TIMEOUT;
> +	xilinx_wwdt_wdd->min_timeout = XWWDT_MIN_TIMEOUT;
> +	xilinx_wwdt_wdd->max_timeout = XWWDT_MAX_TIMEOUT;
> +
> +	xdev->irq = platform_get_irq_byname(pdev, "wdt");
> +	if (xdev->irq < 0) {
> +		ret = xdev->irq;
> +		goto err_clk_disable;
> +	}
> +
> +	if (!devm_request_irq(dev, xdev->irq, xilinx_wwdt_isr,
> +			      0, dev_name(dev), xdev)) {
> +		xilinx_wwdt_wdd->info = &xilinx_wwdt_pretimeout_ident;
> +	}
> +
> +	ret = watchdog_init_timeout(xilinx_wwdt_wdd,
> +				    wwdt_timeout, &pdev->dev);
> +	if (ret)
> +		dev_info(&pdev->dev, "Configured default timeout value\n");
> +
> +	spin_lock_init(&xdev->spinlock);
> +	watchdog_set_drvdata(xilinx_wwdt_wdd, xdev);
> +
> +	ret = devm_watchdog_register_device(dev, xilinx_wwdt_wdd);
> +	if (ret)
> +		goto err_clk_disable;
> +
At this point the watchdog is fully instantiated, and userspace may have enabled it.

> +	clk_disable_unprepare(xdev->clk);
> +
And now its clock is getting stopped. Actually, it is getting unprepared.
Does this even work ?

> +	dev_info(dev, "Xilinx Window Watchdog Timer with timeout %ds\n",
> +		 xilinx_wwdt_wdd->timeout);
> +
> +	return 0;
> +
> +err_clk_disable:
> +	clk_disable_unprepare(xdev->clk);

devm_add_action_or_reset() already handles this.

> +	return ret;
> +}
> +
> +/* Mat for of_platform binding */
> +static const struct of_device_id xwwdt_of_match[] = {
> +	{ .compatible = "xlnx,versal-wwdt-1.0", },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, xwwdt_of_match);
> +
> +static struct platform_driver xwwdt_driver = {
> +	.probe = xwwdt_probe,
> +	.driver = {
> +		.name = "Xilinx Window Watchdog",
> +		.of_match_table = xwwdt_of_match,
> +	},
> +};
> +
> +module_platform_driver(xwwdt_driver);
> +
> +MODULE_AUTHOR("Neeli Srinivas <sneeli@xilinx.com>");
> +MODULE_DESCRIPTION("Xilinx Window Watchdog driver");
> +MODULE_LICENSE("GPL");
> 

Re: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window watchdog mode

[Guenter Roeck]

On 7/13/21 10:29 PM, Srinivas Neeli wrote:
> Hi Guenter,
> 
> If you are fine with my justification, I will send v2 with update code.
> 

We have at least one more watchdog driver with open/closed window concepts.
This is not a "pretimeout". Please see drivers/watchdog/rti_wdt.c for an
example on how to handle this; essentially you have to set min_hw_heartbeat_ms
to the value of the closed window timeout. The watchdog core then handles
the mechanics.

You can not use "pretimeout" to set the "closed" window size; this is an
ABI abuse. There is no standard ABI for this, so if you want to have it
configurable it would have to be a module parameter.

Guenter

> Thanks
> Srinivas Neeli.
> 
> *From:* Srinivas Neeli <sneeli@xilinx.com>
> *Sent:* Wednesday, June 9, 2021 12:57 PM
> *To:* Guenter Roeck <linux@roeck-us.net>; Shubhrajyoti Datta <shubhraj@xilinx.com>; Srinivas Goud <sgoud@xilinx.com>; Michal Simek <michals@xilinx.com>
> *Cc:* wim@linux-watchdog.org; linux-watchdog@vger.kernel.org; linux-kernel@vger.kernel.org; git <git@xilinx.com>
> *Subject:* RE: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window watchdog mode
> 
> Hi Guenter Roeck,
> 
> Thanks for review.
> 
> Versal platform contain System watchdog Timer. It supports two functions, Those are
> 
> 1) Generic watchdog mode
> 
> 2) Window watchdog mode
> 
> Right now we are implementing window watchdog timer functionality in driver.
> 
> Features of Window watchdog mode:
> 
> - The timer contains two configurable windows( closed and open).
> 
> - The timer has to restart only in open window.
> 
> - If software tries to restart out side of open window it will generate a reset.
> 
> We have a requirement for window watchdog driver, So I  implemented window watchdog in two scenarios.
> 
> 1) With Pre-timeout
> 
> 2) With without Pre-timeout
> 
> *Scenario 1:*
> 
> With pre-timeout:
> 
> Here we will get two window concept.
> 
> 1) closed window
> 
> 2) Open window
> 
> start to pre-timeout, we are calling "*closed*" window.
> 
>  From pre-timeout to timeout we are calling “*Open*” window.
> 
> *Operations:*
> 
> start
> 
> keep alive(only in open window,  closed window we are ignoring)
> 
> stop
> 
> we don't have permission to refresh/restart our timer in closed window, So ignoring the keepalive.
> 
> Adjusted code to generate interrupt after completion of closed window. once we cross the closed window we can restart our time anytime.
> 
> Once we reaches to timeout , will get reset signal.
> 
> *Advantage:*
> 
> After getting pre-timeout notification we can reset our timer or can collect our log.
> 
> once we get interrupt we can conclude our task is not working as expected.
> 
> So we can takecare of our tasks.
> 
> *Scenario 2:*
> 
> with out pre-timeout:
> 
> It will work like general watchdog timer.
> 
> we can run keepalive anytime(as there is no closed window, only open window present).
> 
> Once we reaches to time out, will get reset.
> 
> *Operations:*
> 
> start
> 
> keep alive
> 
> stop
> 
> For more details:
> 
> https://www.xilinx.com/support/documentation/architecture-manuals/am011-versal-acap-trm.pdf <https://www.xilinx.com/support/documentation/architecture-manuals/am011-versal-acap-trm.pdf>
> 
> major comments will update in V2.
> 
>  > -----Original Message-----
> 
>  > From: Guenter Roeck <groeck7@gmail.com <mailto:groeck7@gmail.com>> On Behalf Of Guenter Roeck
> 
>  > Sent: Thursday, May 27, 2021 8:09 PM
> 
>  > To: Srinivas Neeli <sneeli@xilinx.com <mailto:sneeli@xilinx.com>>; Shubhrajyoti Datta
> 
>  > <shubhraj@xilinx.com <mailto:shubhraj@xilinx.com>>; Srinivas Goud <sgoud@xilinx.com <mailto:sgoud@xilinx.com>>; Michal Simek
> 
>  > <michals@xilinx.com <mailto:michals@xilinx.com>>
> 
>  > Cc: wim@linux-watchdog.org <mailto:wim@linux-watchdog.org>; linux-watchdog@vger.kernel.org <mailto:linux-watchdog@vger.kernel.org>; linux-
> 
>  > kernel@vger.kernel.org <mailto:kernel@vger.kernel.org>; git <git@xilinx.com <mailto:git@xilinx.com>>
> 
>  > Subject: Re: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window
> 
>  > watchdog mode
> 
>  >
> 
>  > The subject is confusing. This patch does not add "Versal Window watchdog
> 
>  > mode", it adds a driver which supports the Versal Window watchdog. The
> 
>  > subject should be something like "watchdog: Add Versal Window watchdog
> 
>  > driver".
> 
>  >
> 
>  > On 5/27/21 2:57 AM, Srinivas Neeli wrote:
> 
>  > > Versal watchdog driver uses Window watchdog mode. Window watchdog
> 
>  > > timer(WWDT) contains closed(first) and open(second) window with
> 
>  > > 32 bit width. WWDT will generate an interrupt after the first window
> 
>  > > timeout and reset signal after the second window timeout. Timeout and
> 
>  > > Pre-timeout configuration, Stop and Refresh trigger only in open
> 
>  > > window.
> 
>  >
> 
>  > Does that mean that userspace can not send a keepalive before the
> 
>  > pretimeout expires ? That is not how this is supposed to work. If that is the
> 
>  > case, this is not a pretimeout. Pretimeout is supposed to be used for
> 
>  > emergency handling, such as triggering a crash dump. The above description
> 
>  > as well as the code suggests that an interrupt is all but mandatory.
> 
>  >
> 
>  > Assuming that is all the case, ie that keepalive is only possible after the
> 
>  > interrupt was received, and that timeout updates are also only possible after
> 
>  > an interrupt was received, one possible handling would to record that a
> 
>  > keepalive was received, and to record that a request to update the timeout
> 
>  > was received if that happens while the window is closed. Then, when the
> 
>  > interrupt is received, those actions can be applied. Otherwise, if there was
> 
>  > no keepalive request prior to the interrupt, the interrupt handler would call
> 
>  > watchdog_notify_pretimeout().
> 
>  >
> 
>  > Of course, this is all just guesswork.
> 
>  >
> 
>  > More comments below.
> 
>  >
> 
>  > Guenter
> 
>  >
> 
>  > >
> 
>  > > Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com <mailto:srinivas.neeli@xilinx.com>>
> 
>  > > ---
> 
>  > >   drivers/watchdog/Kconfig       |  16 ++
> 
>  > >   drivers/watchdog/Makefile      |   1 +
> 
>  > >   drivers/watchdog/xilinx_wwdt.c | 382
> 
>  > +++++++++++++++++++++++++++++++++
> 
>  > >   3 files changed, 399 insertions(+)
> 
>  > >   create mode 100644 drivers/watchdog/xilinx_wwdt.c
> 
>  > >
> 
>  > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index
> 
>  > > 355100dad60a..2ed17f278783 100644
> 
>  > > --- a/drivers/watchdog/Kconfig
> 
>  > > +++ b/drivers/watchdog/Kconfig
> 
>  > > @@ -307,6 +307,22 @@ config XILINX_WATCHDOG
> 
>  > >            To compile this driver as a module, choose M here: the
> 
>  > >            module will be called of_xilinx_wdt.
> 
>  > >
> 
>  > > +config XILINX_WINDOW_WATCHDOG
> 
>  > > +      tristate "Xilinx Window Watchdog timer"
> 
>  > > +      depends on HAS_IOMEM
> 
>  > > +      select WATCHDOG_CORE
> 
>  > > +      help
> 
>  > > +        Window Watchdog driver for the versal_wwdt ip core.
> 
>  > > +        Window watchdog timer(WWDT) contains closed(first) and
> 
>  > > +        open(second) window with 32 bit width. WWDT will generate
> 
>  > > +        an interrupt after the first window timeout and reset
> 
>  > > +        signal after the second window timeout. Timeout and
> 
>  > > +        Pre-timeout configuration, Stop and Refresh trigger
> 
>  > > +        only in open window.
> 
>  > > +
> 
>  > > +        To compile this driver as a module, choose M here: the
> 
>  > > +        module will be called xilinx_wwdt.
> 
>  > > +
> 
>  > >   config ZIIRAVE_WATCHDOG
> 
>  > >          tristate "Zodiac RAVE Watchdog Timer"
> 
>  > >          depends on I2C
> 
>  > > diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
> 
>  > > index a7eade8b4d45..97d10c3d39c7 100644
> 
>  > > --- a/drivers/watchdog/Makefile
> 
>  > > +++ b/drivers/watchdog/Makefile
> 
>  > > @@ -148,6 +148,7 @@ obj-$(CONFIG_M54xx_WATCHDOG) +=
> 
>  > m54xx_wdt.o
> 
>  > >
> 
>  > >   # MicroBlaze Architecture
> 
>  > >   obj-$(CONFIG_XILINX_WATCHDOG) += of_xilinx_wdt.o
> 
>  > > +obj-$(CONFIG_XILINX_WINDOW_WATCHDOG) += xilinx_wwdt.o
> 
>  > >
> 
>  > >   # MIPS Architecture
> 
>  > >   obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o diff --git
> 
>  > > a/drivers/watchdog/xilinx_wwdt.c b/drivers/watchdog/xilinx_wwdt.c new
> 
>  > > file mode 100644 index 000000000000..8fa2cb2225e8
> 
>  > > --- /dev/null
> 
>  > > +++ b/drivers/watchdog/xilinx_wwdt.c
> 
>  > > @@ -0,0 +1,382 @@
> 
>  > > +// SPDX-License-Identifier: GPL-2.0
> 
>  > > +/*
> 
>  > > + * Window Watchdog Device Driver for Xilinx Versal WWDT
> 
>  > > + *
> 
>  > > + * (C) Copyright 2021 Xilinx, Inc.
> 
>  > > + */
> 
>  > > +
> 
>  > > +#include <linux/clk.h>
> 
>  > > +#include <linux/interrupt.h>
> 
>  > > +#include <linux/io.h>
> 
>  > > +#include <linux/ioport.h>
> 
>  > > +#include <linux/of_device.h>
> 
>  > > +#include <linux/of_address.h>
> 
>  > > +#include <linux/module.h>
> 
>  > > +#include <linux/watchdog.h>
> 
>  > > +
> 
>  > > +#define XWWDT_DEFAULT_TIMEOUT           40
> 
>  > > +#define XWWDT_MIN_TIMEOUT    1
> 
>  > > +#define XWWDT_MAX_TIMEOUT   42
> 
>  > > +
> 
>  > > +/* Register offsets for the WWdt device */
> 
>  > > +#define XWWDT_MWR_OFFSET      0x00
> 
>  > > +#define XWWDT_ESR_OFFSET          0x04
> 
>  > > +#define XWWDT_FCR_OFFSET          0x08
> 
>  > > +#define XWWDT_FWR_OFFSET        0x0c
> 
>  > > +#define XWWDT_SWR_OFFSET        0x10
> 
>  > > +
> 
>  > > +/* Master Write Control Register Masks */
> 
>  > > +#define XWWDT_MWR_MASK                         BIT(0)
> 
>  > > +
> 
>  > > +/* Enable and Status Register Masks */
> 
>  > > +#define XWWDT_ESR_WINT_MASK BIT(16)
> 
>  > > +#define XWWDT_ESR_WSW_MASK BIT(8)
> 
>  > > +#define XWWDT_ESR_WEN_MASK BIT(0)
> 
>  > > +
> 
>  > > +/* Function control Register Masks */
> 
>  > > +#define XWWDT_SBC_MASK                            0xFF00
> 
>  > > +#define XWWDT_SBC_SHIFT                             16
> 
>  > > +#define XWWDT_BSS_MASK                             0xC0
> 
>  > > +
> 
>  > > +static int wwdt_timeout;
> 
>  > > +
> 
>  > > +module_param(wwdt_timeout, int, 0644);
> 
>  > MODULE_PARM_DESC(wwdt_timeout,
> 
>  > > +                      "Watchdog time in seconds. (default="
> 
>  > > +                      __MODULE_STRING(XWWDT_DEFAULT_TIMEOUT) ")");
> 
>  > > +
> 
>  > > +struct xwwdt_device {
> 
>  > > +      void __iomem *base;
> 
>  > > +      spinlock_t spinlock; /* spinlock for register handling */
> 
>  > > +      struct watchdog_device xilinx_wwdt_wdd;
> 
>  > > +      struct clk *clk;
> 
>  > > +      int irq;
> 
>  > > +};
> 
>  > > +
> 
>  > > +static int is_wwdt_in_closed_window(struct watchdog_device *wdd)
> 
>  >
> 
>  > should return bool
> 
> Will update in V2.
> 
>  >
> 
>  > > +{
> 
>  > > +      u32 control_status_reg;
> 
>  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> 
>  > > +
> 
>  > > +      spin_lock(&xdev->spinlock);
> 
>  > > +      control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
> 
>  > > +      spin_unlock(&xdev->spinlock);
> 
>  > > +      if (control_status_reg & XWWDT_ESR_WEN_MASK)
> 
>  > > +                      if (!(control_status_reg & XWWDT_ESR_WSW_MASK))
> 
>  > > +                                      return 0;
> 
>  > > +
> 
>  > > +      return 1;
> 
>  >
> 
>  > Can be written as expresion without if statement
> 
> Will update in V2
> 
>  >
> 
>  > > +}
> 
>  > > +
> 
>  > > +static int xilinx_wwdt_start(struct watchdog_device *wdd) {
> 
>  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> 
>  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> 
>  > >xilinx_wwdt_wdd;
> 
>  > > +      u64 time_out, pre_timeout, count;
> 
>  > > +      u32 control_status_reg, fcr;
> 
>  > > +      int ret;
> 
>  > > +
> 
>  > > +      count = clk_get_rate(xdev->clk);
> 
>  > > +      if (!count)
> 
>  > > +                      return -EINVAL;
> 
>  > > +
> 
>  > Is there a reason to believe that the clock rate can change ?
> 
>  > If not I would suggest to read it once and store it in struct xwwdt_device.
> 
> Will update in V2.
> 
>  >
> 
>  > > +      /* Calculate timeout count */
> 
>  > > +      pre_timeout = count * wdd->pretimeout;
> 
>  > > +      time_out = count * wdd->timeout;
> 
>  > > +      if (!watchdog_active(xilinx_wwdt_wdd)) {
> 
>  > > +                      ret  = clk_enable(xdev->clk);
> 
>  >
> 
>  > This is at the very least confusing.
> 
>  > The last action in the probe function is to call clk_disable_unprepare(),
> 
>  > meaning the clock should not be prepared here. How can it be enabled
> 
>  > without being prepared ?
> 
> Will update in V2
> 
>  >
> 
>  > > +                      if (ret) {
> 
>  > > +                                      dev_err(wdd->parent, "Failed to enable clock\n");
> 
>  > > +                                      return ret;
> 
>  > > +                      }
> 
>  > > +      }
> 
>  > > +
> 
>  > I think it would be better to separate the functions to start/stop the clock
> 
>  > from the function to update/enable the watchdog. The use of
> 
>  > watchdog_active() combined with
> 
>  > clk_enable/clk_disable/clk_prepare_enable/clk_disable_unprepare
> 
>  > is confusing and makes it all but impossible to review the driver.
> 
>  >
> 
>  > > +      spin_lock(&xdev->spinlock);
> 
>  > > +      iowrite32(XWWDT_MWR_MASK, xdev->base +
> 
>  > XWWDT_MWR_OFFSET);
> 
>  > > +      iowrite32(~(u32)XWWDT_ESR_WEN_MASK,
> 
>  > > +                        xdev->base + XWWDT_ESR_OFFSET);
> 
>  > > +
> 
>  > > +      if (pre_timeout) {
> 
>  > > +                      iowrite32((u32)(time_out - pre_timeout),
> 
>  > > +                                        xdev->base + XWWDT_FWR_OFFSET);
> 
>  > > +                      iowrite32((u32)pre_timeout, xdev->base +
> 
>  > XWWDT_SWR_OFFSET);
> 
>  > > +                      fcr = ioread32(xdev->base + XWWDT_SWR_OFFSET);
> 
>  > > +                      fcr = (fcr >> XWWDT_SBC_SHIFT) & XWWDT_SBC_MASK;
> 
>  > > +                      fcr = fcr | XWWDT_BSS_MASK;
> 
>  > > +                      iowrite32(fcr, xdev->base + XWWDT_FCR_OFFSET);
> 
>  > > +      } else {
> 
>  > > +                      iowrite32((u32)pre_timeout,
> 
>  > > +                                        xdev->base + XWWDT_FWR_OFFSET);
> 
>  > > +                      iowrite32((u32)time_out, xdev->base +
> 
>  > XWWDT_SWR_OFFSET);
> 
>  > > +                      iowrite32(0x0, xdev->base + XWWDT_FCR_OFFSET);
> 
>  > > +      }
> 
>  > > +
> 
>  > > +      /* Enable the window watchdog timer */
> 
>  > > +      control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
> 
>  > > +      control_status_reg |= XWWDT_ESR_WEN_MASK;
> 
>  > > +      iowrite32(control_status_reg, xdev->base + XWWDT_ESR_OFFSET);
> 
>  > > +
> 
>  > > +      spin_unlock(&xdev->spinlock);
> 
>  > > +
> 
>  > > +      dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Started!\n");
> 
>  > > +
> 
>  > > +      return 0;
> 
>  > > +}
> 
>  > > +
> 
>  > > +static int xilinx_wwdt_stop(struct watchdog_device *wdd) {
> 
>  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> 
>  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> 
>  > >xilinx_wwdt_wdd;
> 
>  > > +
> 
>  > > +      if (!is_wwdt_in_closed_window(wdd)) {
> 
>  > > +                      dev_warn(xilinx_wwdt_wdd->parent, "timer in closed
> 
>  > window");
> 
>  > > +                      return -EINVAL;
> 
>  > > +      }
> 
>  > > +
> 
>  > > +      spin_lock(&xdev->spinlock);
> 
>  > > +
> 
>  > > +      iowrite32(XWWDT_MWR_MASK, xdev->base +
> 
>  > XWWDT_MWR_OFFSET);
> 
>  > > +      /* Disable the Window watchdog timer */
> 
>  > > +      iowrite32(~(u32)XWWDT_ESR_WEN_MASK,
> 
>  > > +                        xdev->base + XWWDT_ESR_OFFSET);
> 
>  > > +
> 
>  > > +      spin_unlock(&xdev->spinlock);
> 
>  > > +
> 
>  > > +      if (watchdog_active(xilinx_wwdt_wdd))
> 
>  > > +                      clk_disable(xdev->clk);
> 
>  > > +
> 
>  >
> 
>  > The stop function won't be called if the watchdog is not running, ie if
> 
>  > watchdog_active() returns false.
> 
>  > I don't undeerstand the logic of clock handling in this driver.
> 
>  > More on that below.
> 
>  >
> 
>  > > +      dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Stopped!\n");
> 
>  > > +
> 
>  > > +      return 0;
> 
>  > > +}
> 
>  > > +
> 
>  > > +static int xilinx_wwdt_keepalive(struct watchdog_device *wdd) {
> 
>  > > +      u32 control_status_reg;
> 
>  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> 
>  > > +
> 
>  > > +      /* Refresh in open window is ignored */
> 
>  > > +      if (!is_wwdt_in_closed_window(wdd))
> 
>  > > +                      return 0;
> 
>  > > +
> 
>  > This is dangerous. There is no reason for userspace to adhere to these
> 
>  > restrictions.
> 
>  >
> 
>  > > +      spin_lock(&xdev->spinlock);
> 
>  > > +
> 
>  > > +      iowrite32(XWWDT_MWR_MASK, xdev->base +
> 
>  > XWWDT_MWR_OFFSET);
> 
>  > > +      control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
> 
>  > > +      control_status_reg |= XWWDT_ESR_WINT_MASK;
> 
>  > > +      control_status_reg &= ~XWWDT_ESR_WSW_MASK;
> 
>  > > +      iowrite32(control_status_reg, xdev->base + XWWDT_ESR_OFFSET);
> 
>  > > +      control_status_reg = ioread32(xdev->base + XWWDT_ESR_OFFSET);
> 
>  > > +      control_status_reg |= XWWDT_ESR_WSW_MASK;
> 
>  > > +      iowrite32(control_status_reg, xdev->base + XWWDT_ESR_OFFSET);
> 
>  > > +
> 
>  > > +      spin_unlock(&xdev->spinlock);
> 
>  > > +
> 
>  > > +      return 0;
> 
>  > > +}
> 
>  > > +
> 
>  > > +static int xilinx_wwdt_set_timeout(struct watchdog_device *wdd,
> 
>  > > +                                                         unsigned int new_time)
> 
>  > > +{
> 
>  > > +      u32 ret = 0;
> 
>  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> 
>  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> 
>  > >xilinx_wwdt_wdd;
> 
>  > > +
> 
>  > > +      if (!is_wwdt_in_closed_window(wdd)) {
> 
>  > > +                      dev_warn(xilinx_wwdt_wdd->parent, "timer in closed
> 
>  > window");
> 
>  > > +                      return -EINVAL;
> 
>  > > +      }
> 
>  > > +
> 
>  >
> 
>  > So userspace can clog the log by continuously trying to set the timeout ?
> 
>  >
> 
>  > Also, again, this is dangerous. Userspace does not know the window size.
> 
> user can configure window size.
> 
>  >
> 
>  >
> 
>  > > +      if (new_time < XWWDT_MIN_TIMEOUT ||
> 
>  > > +          new_time > XWWDT_MAX_TIMEOUT) {
> 
>  > > +                      dev_warn(xilinx_wwdt_wdd->parent,
> 
>  > > +                                      "timeout value must be %d<=x<=%d, using %d\n",
> 
>  > > +                                      XWWDT_MIN_TIMEOUT,
> 
>  > > +                                      XWWDT_MAX_TIMEOUT, new_time);
> 
>  > > +                      return -EINVAL;
> 
>  > > +      }
> 
>  >
> 
>  > This is handled by the watchdog core.
> 
>  >
> 
>  > > +
> 
>  > > +      wdd->timeout = new_time;
> 
>  > > +      wdd->pretimeout = 0;
> 
>  > > +
> 
>  > > +      if (watchdog_active(xilinx_wwdt_wdd)) {
> 
>  > > +                      ret = xilinx_wwdt_start(wdd);
> 
>  > > +                      if (ret)
> 
>  > > +                                      dev_dbg(xilinx_wwdt_wdd->parent, "timer start
> 
>  > failed");
> 
>  > > +      }
> 
>  > > +
> 
>  > > +      return ret;
> 
>  > > +}
> 
>  > > +
> 
>  > > +static int xilinx_wwdt_set_pretimeout(struct watchdog_device *wdd,
> 
>  > > +                                                            u32 new_pretimeout)
> 
>  > > +{
> 
>  > > +      u32 ret = 0;
> 
>  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> 
>  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> 
>  > >xilinx_wwdt_wdd;
> 
>  > > +
> 
>  > > +      if (!is_wwdt_in_closed_window(wdd)) {
> 
>  > > +                      dev_warn(xilinx_wwdt_wdd->parent, "timer in closed
> 
>  > window");
> 
>  > > +                      return -EINVAL;
> 
>  > > +      }
> 
>  >
> 
>  > This restriction is not only dangerous but confusing, and simply unacceptable.
> 
>  > Userspace will get -EINVAL with no idea what is wrong.
> 
>  > A watchdog daemon will bail out for no good reason.
> 
>  >
> 
>  > > +
> 
>  > > +      if (new_pretimeout < wdd->min_timeout ||
> 
>  > > +          new_pretimeout >= wdd->timeout)
> 
>  > > +                      return -EINVAL;
> 
>  > > +
> 
>  > This is handled by the watchdog core.
> 
>  >
> 
>  > > +      wdd->pretimeout = new_pretimeout;
> 
>  > > +
> 
>  > > +      if (watchdog_active(xilinx_wwdt_wdd)) {
> 
>  > > +                      ret = xilinx_wwdt_start(wdd);
> 
>  > > +                      if (ret)
> 
>  > > +                                      dev_dbg(xilinx_wwdt_wdd->parent, "timer start
> 
>  > failed");
> 
>  > > +      }
> 
>  > > +
> 
>  > > +      return ret;
> 
>  > > +}
> 
>  > > +
> 
>  > > +static void xwwdt_clk_disable_unprepare(void *data) {
> 
>  > > +      clk_disable_unprepare(data);
> 
>  > > +}
> 
>  > > +
> 
>  > > +static irqreturn_t xilinx_wwdt_isr(int irq, void *wdog_arg) {
> 
>  > > +      struct xwwdt_device *xdev = wdog_arg;
> 
>  > > +
> 
>  > > +      watchdog_notify_pretimeout(&xdev->xilinx_wwdt_wdd);
> 
>  > > +
> 
>  > > +      return IRQ_HANDLED;
> 
>  > > +}
> 
>  > > +
> 
>  > > +static const struct watchdog_info xilinx_wwdt_ident = {
> 
>  > > +      .options = WDIOF_MAGICCLOSE |
> 
>  > > +                         WDIOF_KEEPALIVEPING |
> 
>  > > +                         WDIOF_SETTIMEOUT,
> 
>  > > +      .firmware_version = 1,
> 
>  > > +      .identity = "xlnx_window watchdog",
> 
>  > > +};
> 
>  > > +
> 
>  > > +static const struct watchdog_info xilinx_wwdt_pretimeout_ident = {
> 
>  > > +      .options = WDIOF_MAGICCLOSE |
> 
>  > > +                         WDIOF_KEEPALIVEPING |
> 
>  > > +                         WDIOF_PRETIMEOUT |
> 
>  > > +                         WDIOF_SETTIMEOUT,
> 
>  > > +      .firmware_version = 1,
> 
>  > > +      .identity = "xlnx_window watchdog",
> 
>  > > +};
> 
>  > > +
> 
>  > > +static const struct watchdog_ops xilinx_wwdt_ops = {
> 
>  > > +      .owner = THIS_MODULE,
> 
>  > > +      .start = xilinx_wwdt_start,
> 
>  > > +      .stop = xilinx_wwdt_stop,
> 
>  > > +      .ping = xilinx_wwdt_keepalive,
> 
>  > > +      .set_timeout = xilinx_wwdt_set_timeout,
> 
>  > > +      .set_pretimeout = xilinx_wwdt_set_pretimeout, };
> 
>  > > +
> 
>  > > +static int xwwdt_probe(struct platform_device *pdev) {
> 
>  > > +      struct device *dev = &pdev->dev;
> 
>  > > +      struct watchdog_device *xilinx_wwdt_wdd;
> 
>  > > +      struct xwwdt_device *xdev;
> 
>  > > +      u32 pre_timeout = 0;
> 
>  > > +      int ret;
> 
>  > > +
> 
>  > > +      xdev = devm_kzalloc(dev, sizeof(*xdev), GFP_KERNEL);
> 
>  > > +      if (!xdev)
> 
>  > > +                      return -ENOMEM;
> 
>  > > +
> 
>  > > +      xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
> 
>  > > +      xilinx_wwdt_wdd->info = &xilinx_wwdt_ident;
> 
>  > > +      xilinx_wwdt_wdd->ops = &xilinx_wwdt_ops;
> 
>  > > +      xilinx_wwdt_wdd->parent = dev;
> 
>  > > +
> 
>  > > +      xdev->base = devm_platform_ioremap_resource(pdev, 0);
> 
>  > > +      if (IS_ERR(xdev->base))
> 
>  > > +                      return PTR_ERR(xdev->base);
> 
>  > > +
> 
>  > > +      ret = of_property_read_u32(dev->of_node, "pretimeout-sec",
> 
>  > > +                                                         &pre_timeout);
> 
>  > > +      if (ret)
> 
>  > > +                      dev_dbg(dev,
> 
>  > > +                                      "Parameter \"pretimeout-sec\" not found\n");
> 
>  > > +
> 
>  > > +      xdev->clk = devm_clk_get(dev, NULL);
> 
>  > > +      if (IS_ERR(xdev->clk))
> 
>  > > +                      return PTR_ERR(xdev->clk);
> 
>  > > +
> 
>  > > +      ret = clk_get_rate(xdev->clk);
> 
>  > > +      if (!ret)
> 
>  > > +                      return -EINVAL;
> 
>  > > +
> 
>  > > +      ret = clk_prepare_enable(xdev->clk);
> 
>  > > +      if (ret) {
> 
>  > > +                      dev_err(dev, "unable to enable clock\n");
> 
>  > > +                      return ret;
> 
>  > > +      }
> 
>  > > +      ret = devm_add_action_or_reset(dev,
> 
>  > xwwdt_clk_disable_unprepare,
> 
>  > > +                                                             xdev->clk);
> 
>  > > +      if (ret)
> 
>  > > +                      goto err_clk_disable;
> 
>  > > +
> 
>  >
> 
>  > Seems pointless. What happens when you unload the driver ?
> 
>  >
> 
>  > > +      xilinx_wwdt_wdd->pretimeout = pre_timeout;
> 
>  > > +      xilinx_wwdt_wdd->timeout = XWWDT_DEFAULT_TIMEOUT;
> 
>  > > +      xilinx_wwdt_wdd->min_timeout = XWWDT_MIN_TIMEOUT;
> 
>  > > +      xilinx_wwdt_wdd->max_timeout = XWWDT_MAX_TIMEOUT;
> 
>  > > +
> 
>  > > +      xdev->irq = platform_get_irq_byname(pdev, "wdt");
> 
>  > > +      if (xdev->irq < 0) {
> 
>  > > +                      ret = xdev->irq;
> 
>  > > +                      goto err_clk_disable;
> 
>  > > +      }
> 
>  > > +
> 
>  > > +      if (!devm_request_irq(dev, xdev->irq, xilinx_wwdt_isr,
> 
>  > > +                                            0, dev_name(dev), xdev)) {
> 
>  > > +                      xilinx_wwdt_wdd->info = &xilinx_wwdt_pretimeout_ident;
> 
>  > > +      }
> 
>  > > +
> 
>  > > +      ret = watchdog_init_timeout(xilinx_wwdt_wdd,
> 
>  > > +                                                          wwdt_timeout, &pdev->dev);
> 
>  > > +      if (ret)
> 
>  > > +                      dev_info(&pdev->dev, "Configured default timeout
> 
>  > value\n");
> 
>  > > +
> 
>  > > +      spin_lock_init(&xdev->spinlock);
> 
>  > > +      watchdog_set_drvdata(xilinx_wwdt_wdd, xdev);
> 
>  > > +
> 
>  > > +      ret = devm_watchdog_register_device(dev, xilinx_wwdt_wdd);
> 
>  > > +      if (ret)
> 
>  > > +                      goto err_clk_disable;
> 
>  > > +
> 
>  > At this point the watchdog is fully instantiated, and userspace may have
> 
>  > enabled it.
> 
>  >
> 
>  > > +      clk_disable_unprepare(xdev->clk);
> 
>  > > +
> 
>  > And now its clock is getting stopped. Actually, it is getting unprepared.
> 
>  > Does this even work ?
> 
>  >
> 
>  > > +      dev_info(dev, "Xilinx Window Watchdog Timer with timeout %ds\n",
> 
>  > > +                      xilinx_wwdt_wdd->timeout);
> 
>  > > +
> 
>  > > +      return 0;
> 
>  > > +
> 
>  > > +err_clk_disable:
> 
>  > > +      clk_disable_unprepare(xdev->clk);
> 
>  >
> 
>  > devm_add_action_or_reset() already handles this.
> 
>  >
> 
>  > > +      return ret;
> 
>  > > +}
> 
>  > > +
> 
>  > > +/* Mat for of_platform binding */
> 
>  > > +static const struct of_device_id xwwdt_of_match[] = {
> 
>  > > +      { .compatible = "xlnx,versal-wwdt-1.0", },
> 
>  > > +      {},
> 
>  > > +};
> 
>  > > +MODULE_DEVICE_TABLE(of, xwwdt_of_match);
> 
>  > > +
> 
>  > > +static struct platform_driver xwwdt_driver = {
> 
>  > > +      .probe = xwwdt_probe,
> 
>  > > +      .driver = {
> 
>  > > +                      .name = "Xilinx Window Watchdog",
> 
>  > > +                      .of_match_table = xwwdt_of_match,
> 
>  > > +      },
> 
>  > > +};
> 
>  > > +
> 
>  > > +module_platform_driver(xwwdt_driver);
> 
>  > > +
> 
>  > > +MODULE_AUTHOR("Neeli Srinivas <sneeli@xilinx.com <mailto:sneeli@xilinx.com>>");
> 
>  > > +MODULE_DESCRIPTION("Xilinx Window Watchdog driver");
> 
>  > > +MODULE_LICENSE("GPL");
> 
>  > >
> 
> Thanks
> 
> Srinivas Neeli.
> 

RE: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window watchdog mode

[Srinivas Neeli]

Hi Guenter,

I went through reference "rti_wdt.c" driver. It implemented Window watchdog with few limitations.
Limitations:
--------------- 
1) Not able to configure Closed window and Open window separately.
	Because of xilinx window watchdog supports separate configurable closed and open windows.
2) In case of rti driver, if any bad event(error event) occur due to any user space event like ping then
   the watchdog core bypassing the ping call.
    But in case of xilinx watchdog there are separate register bits for counting error events.
	So if I implement driver in similar to rti-wdt.c driver, then we can not be able read the error events from
	the registers.
	So is this ok because we are not notifying the errors to user.

Thanks
Srinivas Neeli

> -----Original Message-----
> From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
> Sent: Wednesday, July 14, 2021 5:01 PM
> To: Srinivas Neeli <sneeli@xilinx.com>; Shubhrajyoti Datta
> <shubhraj@xilinx.com>; Srinivas Goud <sgoud@xilinx.com>; Michal Simek
> <michals@xilinx.com>
> Cc: wim@linux-watchdog.org; linux-watchdog@vger.kernel.org; linux-
> kernel@vger.kernel.org; git <git@xilinx.com>
> Subject: Re: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window
> watchdog mode
> 
> On 7/13/21 10:29 PM, Srinivas Neeli wrote:
> > Hi Guenter,
> >
> > If you are fine with my justification, I will send v2 with update code.
> >
> 
> We have at least one more watchdog driver with open/closed window
> concepts.
> This is not a "pretimeout". Please see drivers/watchdog/rti_wdt.c for an
> example on how to handle this; essentially you have to set
> min_hw_heartbeat_ms to the value of the closed window timeout. The
> watchdog core then handles the mechanics.
> 
> You can not use "pretimeout" to set the "closed" window size; this is an ABI
> abuse. There is no standard ABI for this, so if you want to have it configurable
> it would have to be a module parameter.
> 
> Guenter
> 
> > Thanks
> > Srinivas Neeli.
> >
> > *From:* Srinivas Neeli <sneeli@xilinx.com>
> > *Sent:* Wednesday, June 9, 2021 12:57 PM
> > *To:* Guenter Roeck <linux@roeck-us.net>; Shubhrajyoti Datta
> > <shubhraj@xilinx.com>; Srinivas Goud <sgoud@xilinx.com>; Michal Simek
> > <michals@xilinx.com>
> > *Cc:* wim@linux-watchdog.org; linux-watchdog@vger.kernel.org;
> > linux-kernel@vger.kernel.org; git <git@xilinx.com>
> > *Subject:* RE: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window
> > watchdog mode
> >
> > Hi Guenter Roeck,
> >
> > Thanks for review.
> >
> > Versal platform contain System watchdog Timer. It supports two
> > functions, Those are
> >
> > 1) Generic watchdog mode
> >
> > 2) Window watchdog mode
> >
> > Right now we are implementing window watchdog timer functionality in
> driver.
> >
> > Features of Window watchdog mode:
> >
> > - The timer contains two configurable windows( closed and open).
> >
> > - The timer has to restart only in open window.
> >
> > - If software tries to restart out side of open window it will generate a
> reset.
> >
> > We have a requirement for window watchdog driver, So I  implemented
> window watchdog in two scenarios.
> >
> > 1) With Pre-timeout
> >
> > 2) With without Pre-timeout
> >
> > *Scenario 1:*
> >
> > With pre-timeout:
> >
> > Here we will get two window concept.
> >
> > 1) closed window
> >
> > 2) Open window
> >
> > start to pre-timeout, we are calling "*closed*" window.
> >
> >  From pre-timeout to timeout we are calling “*Open*” window.
> >
> > *Operations:*
> >
> > start
> >
> > keep alive(only in open window,  closed window we are ignoring)
> >
> > stop
> >
> > we don't have permission to refresh/restart our timer in closed window, So
> ignoring the keepalive.
> >
> > Adjusted code to generate interrupt after completion of closed window.
> once we cross the closed window we can restart our time anytime.
> >
> > Once we reaches to timeout , will get reset signal.
> >
> > *Advantage:*
> >
> > After getting pre-timeout notification we can reset our timer or can collect
> our log.
> >
> > once we get interrupt we can conclude our task is not working as expected.
> >
> > So we can takecare of our tasks.
> >
> > *Scenario 2:*
> >
> > with out pre-timeout:
> >
> > It will work like general watchdog timer.
> >
> > we can run keepalive anytime(as there is no closed window, only open
> window present).
> >
> > Once we reaches to time out, will get reset.
> >
> > *Operations:*
> >
> > start
> >
> > keep alive
> >
> > stop
> >
> > For more details:
> >
> > https://www.xilinx.com/support/documentation/architecture-
> manuals/am01
> > 1-versal-acap-trm.pdf
> > <https://www.xilinx.com/support/documentation/architecture-
> manuals/am0
> > 11-versal-acap-trm.pdf>
> >
> > major comments will update in V2.
> >
> >  > -----Original Message-----
> >
> >  > From: Guenter Roeck <groeck7@gmail.com
> <mailto:groeck7@gmail.com>>
> > On Behalf Of Guenter Roeck
> >
> >  > Sent: Thursday, May 27, 2021 8:09 PM
> >
> >  > To: Srinivas Neeli <sneeli@xilinx.com <mailto:sneeli@xilinx.com>>;
> > Shubhrajyoti Datta
> >
> >  > <shubhraj@xilinx.com <mailto:shubhraj@xilinx.com>>; Srinivas Goud
> > <sgoud@xilinx.com <mailto:sgoud@xilinx.com>>; Michal Simek
> >
> >  > <michals@xilinx.com <mailto:michals@xilinx.com>>
> >
> >  > Cc: wim@linux-watchdog.org <mailto:wim@linux-watchdog.org>;
> > linux-watchdog@vger.kernel.org
> > <mailto:linux-watchdog@vger.kernel.org>; linux-
> >
> >  > kernel@vger.kernel.org <mailto:kernel@vger.kernel.org>; git
> > <git@xilinx.com <mailto:git@xilinx.com>>
> >
> >  > Subject: Re: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window
> >
> >  > watchdog mode
> >
> >  >
> >
> >  > The subject is confusing. This patch does not add "Versal Window
> > watchdog
> >
> >  > mode", it adds a driver which supports the Versal Window watchdog.
> > The
> >
> >  > subject should be something like "watchdog: Add Versal Window
> > watchdog
> >
> >  > driver".
> >
> >  >
> >
> >  > On 5/27/21 2:57 AM, Srinivas Neeli wrote:
> >
> >  > > Versal watchdog driver uses Window watchdog mode. Window
> watchdog
> >
> >  > > timer(WWDT) contains closed(first) and open(second) window with
> >
> >  > > 32 bit width. WWDT will generate an interrupt after the first
> > window
> >
> >  > > timeout and reset signal after the second window timeout. Timeout
> > and
> >
> >  > > Pre-timeout configuration, Stop and Refresh trigger only in open
> >
> >  > > window.
> >
> >  >
> >
> >  > Does that mean that userspace can not send a keepalive before the
> >
> >  > pretimeout expires ? That is not how this is supposed to work. If
> > that is the
> >
> >  > case, this is not a pretimeout. Pretimeout is supposed to be used
> > for
> >
> >  > emergency handling, such as triggering a crash dump. The above
> > description
> >
> >  > as well as the code suggests that an interrupt is all but mandatory.
> >
> >  >
> >
> >  > Assuming that is all the case, ie that keepalive is only possible
> > after the
> >
> >  > interrupt was received, and that timeout updates are also only
> > possible after
> >
> >  > an interrupt was received, one possible handling would to record
> > that a
> >
> >  > keepalive was received, and to record that a request to update the
> > timeout
> >
> >  > was received if that happens while the window is closed. Then, when
> > the
> >
> >  > interrupt is received, those actions can be applied. Otherwise, if
> > there was
> >
> >  > no keepalive request prior to the interrupt, the interrupt handler
> > would call
> >
> >  > watchdog_notify_pretimeout().
> >
> >  >
> >
> >  > Of course, this is all just guesswork.
> >
> >  >
> >
> >  > More comments below.
> >
> >  >
> >
> >  > Guenter
> >
> >  >
> >
> >  > >
> >
> >  > > Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com
> > <mailto:srinivas.neeli@xilinx.com>>
> >
> >  > > ---
> >
> >  > >   drivers/watchdog/Kconfig       |  16 ++
> >
> >  > >   drivers/watchdog/Makefile      |   1 +
> >
> >  > >   drivers/watchdog/xilinx_wwdt.c | 382
> >
> >  > +++++++++++++++++++++++++++++++++
> >
> >  > >   3 files changed, 399 insertions(+)
> >
> >  > >   create mode 100644 drivers/watchdog/xilinx_wwdt.c
> >
> >  > >
> >
> >  > > diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
> > index
> >
> >  > > 355100dad60a..2ed17f278783 100644
> >
> >  > > --- a/drivers/watchdog/Kconfig
> >
> >  > > +++ b/drivers/watchdog/Kconfig
> >
> >  > > @@ -307,6 +307,22 @@ config XILINX_WATCHDOG
> >
> >  > >            To compile this driver as a module, choose M here: the
> >
> >  > >            module will be called of_xilinx_wdt.
> >
> >  > >
> >
> >  > > +config XILINX_WINDOW_WATCHDOG
> >
> >  > > +      tristate "Xilinx Window Watchdog timer"
> >
> >  > > +      depends on HAS_IOMEM
> >
> >  > > +      select WATCHDOG_CORE
> >
> >  > > +      help
> >
> >  > > +        Window Watchdog driver for the versal_wwdt ip core.
> >
> >  > > +        Window watchdog timer(WWDT) contains closed(first) and
> >
> >  > > +        open(second) window with 32 bit width. WWDT will
> > generate
> >
> >  > > +        an interrupt after the first window timeout and reset
> >
> >  > > +        signal after the second window timeout. Timeout and
> >
> >  > > +        Pre-timeout configuration, Stop and Refresh trigger
> >
> >  > > +        only in open window.
> >
> >  > > +
> >
> >  > > +        To compile this driver as a module, choose M here: the
> >
> >  > > +        module will be called xilinx_wwdt.
> >
> >  > > +
> >
> >  > >   config ZIIRAVE_WATCHDOG
> >
> >  > >          tristate "Zodiac RAVE Watchdog Timer"
> >
> >  > >          depends on I2C
> >
> >  > > diff --git a/drivers/watchdog/Makefile
> > b/drivers/watchdog/Makefile
> >
> >  > > index a7eade8b4d45..97d10c3d39c7 100644
> >
> >  > > --- a/drivers/watchdog/Makefile
> >
> >  > > +++ b/drivers/watchdog/Makefile
> >
> >  > > @@ -148,6 +148,7 @@ obj-$(CONFIG_M54xx_WATCHDOG) +=
> >
> >  > m54xx_wdt.o
> >
> >  > >
> >
> >  > >   # MicroBlaze Architecture
> >
> >  > >   obj-$(CONFIG_XILINX_WATCHDOG) += of_xilinx_wdt.o
> >
> >  > > +obj-$(CONFIG_XILINX_WINDOW_WATCHDOG) += xilinx_wwdt.o
> >
> >  > >
> >
> >  > >   # MIPS Architecture
> >
> >  > >   obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o diff --git
> >
> >  > > a/drivers/watchdog/xilinx_wwdt.c b/drivers/watchdog/xilinx_wwdt.c
> > new
> >
> >  > > file mode 100644 index 000000000000..8fa2cb2225e8
> >
> >  > > --- /dev/null
> >
> >  > > +++ b/drivers/watchdog/xilinx_wwdt.c
> >
> >  > > @@ -0,0 +1,382 @@
> >
> >  > > +// SPDX-License-Identifier: GPL-2.0
> >
> >  > > +/*
> >
> >  > > + * Window Watchdog Device Driver for Xilinx Versal WWDT
> >
> >  > > + *
> >
> >  > > + * (C) Copyright 2021 Xilinx, Inc.
> >
> >  > > + */
> >
> >  > > +
> >
> >  > > +#include <linux/clk.h>
> >
> >  > > +#include <linux/interrupt.h>
> >
> >  > > +#include <linux/io.h>
> >
> >  > > +#include <linux/ioport.h>
> >
> >  > > +#include <linux/of_device.h>
> >
> >  > > +#include <linux/of_address.h>
> >
> >  > > +#include <linux/module.h>
> >
> >  > > +#include <linux/watchdog.h>
> >
> >  > > +
> >
> >  > > +#define XWWDT_DEFAULT_TIMEOUT           40
> >
> >  > > +#define XWWDT_MIN_TIMEOUT    1
> >
> >  > > +#define XWWDT_MAX_TIMEOUT   42
> >
> >  > > +
> >
> >  > > +/* Register offsets for the WWdt device */
> >
> >  > > +#define XWWDT_MWR_OFFSET      0x00
> >
> >  > > +#define XWWDT_ESR_OFFSET          0x04
> >
> >  > > +#define XWWDT_FCR_OFFSET          0x08
> >
> >  > > +#define XWWDT_FWR_OFFSET        0x0c
> >
> >  > > +#define XWWDT_SWR_OFFSET        0x10
> >
> >  > > +
> >
> >  > > +/* Master Write Control Register Masks */
> >
> >  > > +#define XWWDT_MWR_MASK                         BIT(0)
> >
> >  > > +
> >
> >  > > +/* Enable and Status Register Masks */
> >
> >  > > +#define XWWDT_ESR_WINT_MASK BIT(16)
> >
> >  > > +#define XWWDT_ESR_WSW_MASK BIT(8)
> >
> >  > > +#define XWWDT_ESR_WEN_MASK BIT(0)
> >
> >  > > +
> >
> >  > > +/* Function control Register Masks */
> >
> >  > > +#define XWWDT_SBC_MASK                            0xFF00
> >
> >  > > +#define XWWDT_SBC_SHIFT                             16
> >
> >  > > +#define XWWDT_BSS_MASK                             0xC0
> >
> >  > > +
> >
> >  > > +static int wwdt_timeout;
> >
> >  > > +
> >
> >  > > +module_param(wwdt_timeout, int, 0644);
> >
> >  > MODULE_PARM_DESC(wwdt_timeout,
> >
> >  > > +                      "Watchdog time in seconds. (default="
> >
> >  > > +                      __MODULE_STRING(XWWDT_DEFAULT_TIMEOUT)
> > ")");
> >
> >  > > +
> >
> >  > > +struct xwwdt_device {
> >
> >  > > +      void __iomem *base;
> >
> >  > > +      spinlock_t spinlock; /* spinlock for register handling */
> >
> >  > > +      struct watchdog_device xilinx_wwdt_wdd;
> >
> >  > > +      struct clk *clk;
> >
> >  > > +      int irq;
> >
> >  > > +};
> >
> >  > > +
> >
> >  > > +static int is_wwdt_in_closed_window(struct watchdog_device *wdd)
> >
> >  >
> >
> >  > should return bool
> >
> > Will update in V2.
> >
> >  >
> >
> >  > > +{
> >
> >  > > +      u32 control_status_reg;
> >
> >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> >
> >  > > +
> >
> >  > > +      spin_lock(&xdev->spinlock);
> >
> >  > > +      control_status_reg = ioread32(xdev->base +
> > XWWDT_ESR_OFFSET);
> >
> >  > > +      spin_unlock(&xdev->spinlock);
> >
> >  > > +      if (control_status_reg & XWWDT_ESR_WEN_MASK)
> >
> >  > > +                      if (!(control_status_reg &
> > XWWDT_ESR_WSW_MASK))
> >
> >  > > +                                      return 0;
> >
> >  > > +
> >
> >  > > +      return 1;
> >
> >  >
> >
> >  > Can be written as expresion without if statement
> >
> > Will update in V2
> >
> >  >
> >
> >  > > +}
> >
> >  > > +
> >
> >  > > +static int xilinx_wwdt_start(struct watchdog_device *wdd) {
> >
> >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> >
> >  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> >
> >  > >xilinx_wwdt_wdd;
> >
> >  > > +      u64 time_out, pre_timeout, count;
> >
> >  > > +      u32 control_status_reg, fcr;
> >
> >  > > +      int ret;
> >
> >  > > +
> >
> >  > > +      count = clk_get_rate(xdev->clk);
> >
> >  > > +      if (!count)
> >
> >  > > +                      return -EINVAL;
> >
> >  > > +
> >
> >  > Is there a reason to believe that the clock rate can change ?
> >
> >  > If not I would suggest to read it once and store it in struct xwwdt_device.
> >
> > Will update in V2.
> >
> >  >
> >
> >  > > +      /* Calculate timeout count */
> >
> >  > > +      pre_timeout = count * wdd->pretimeout;
> >
> >  > > +      time_out = count * wdd->timeout;
> >
> >  > > +      if (!watchdog_active(xilinx_wwdt_wdd)) {
> >
> >  > > +                      ret  = clk_enable(xdev->clk);
> >
> >  >
> >
> >  > This is at the very least confusing.
> >
> >  > The last action in the probe function is to call
> > clk_disable_unprepare(),
> >
> >  > meaning the clock should not be prepared here. How can it be
> > enabled
> >
> >  > without being prepared ?
> >
> > Will update in V2
> >
> >  >
> >
> >  > > +                      if (ret) {
> >
> >  > > +                                      dev_err(wdd->parent,
> > "Failed to enable clock\n");
> >
> >  > > +                                      return ret;
> >
> >  > > +                      }
> >
> >  > > +      }
> >
> >  > > +
> >
> >  > I think it would be better to separate the functions to start/stop
> > the clock
> >
> >  > from the function to update/enable the watchdog. The use of
> >
> >  > watchdog_active() combined with
> >
> >  > clk_enable/clk_disable/clk_prepare_enable/clk_disable_unprepare
> >
> >  > is confusing and makes it all but impossible to review the driver.
> >
> >  >
> >
> >  > > +      spin_lock(&xdev->spinlock);
> >
> >  > > +      iowrite32(XWWDT_MWR_MASK, xdev->base +
> >
> >  > XWWDT_MWR_OFFSET);
> >
> >  > > +      iowrite32(~(u32)XWWDT_ESR_WEN_MASK,
> >
> >  > > +                        xdev->base + XWWDT_ESR_OFFSET);
> >
> >  > > +
> >
> >  > > +      if (pre_timeout) {
> >
> >  > > +                      iowrite32((u32)(time_out - pre_timeout),
> >
> >  > > +                                        xdev->base +
> > XWWDT_FWR_OFFSET);
> >
> >  > > +                      iowrite32((u32)pre_timeout, xdev->base +
> >
> >  > XWWDT_SWR_OFFSET);
> >
> >  > > +                      fcr = ioread32(xdev->base +
> > XWWDT_SWR_OFFSET);
> >
> >  > > +                      fcr = (fcr >> XWWDT_SBC_SHIFT) &
> > XWWDT_SBC_MASK;
> >
> >  > > +                      fcr = fcr | XWWDT_BSS_MASK;
> >
> >  > > +                      iowrite32(fcr, xdev->base +
> > XWWDT_FCR_OFFSET);
> >
> >  > > +      } else {
> >
> >  > > +                      iowrite32((u32)pre_timeout,
> >
> >  > > +                                        xdev->base +
> > XWWDT_FWR_OFFSET);
> >
> >  > > +                      iowrite32((u32)time_out, xdev->base +
> >
> >  > XWWDT_SWR_OFFSET);
> >
> >  > > +                      iowrite32(0x0, xdev->base +
> > XWWDT_FCR_OFFSET);
> >
> >  > > +      }
> >
> >  > > +
> >
> >  > > +      /* Enable the window watchdog timer */
> >
> >  > > +      control_status_reg = ioread32(xdev->base +
> > XWWDT_ESR_OFFSET);
> >
> >  > > +      control_status_reg |= XWWDT_ESR_WEN_MASK;
> >
> >  > > +      iowrite32(control_status_reg, xdev->base +
> > XWWDT_ESR_OFFSET);
> >
> >  > > +
> >
> >  > > +      spin_unlock(&xdev->spinlock);
> >
> >  > > +
> >
> >  > > +      dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Started!\n");
> >
> >  > > +
> >
> >  > > +      return 0;
> >
> >  > > +}
> >
> >  > > +
> >
> >  > > +static int xilinx_wwdt_stop(struct watchdog_device *wdd) {
> >
> >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> >
> >  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> >
> >  > >xilinx_wwdt_wdd;
> >
> >  > > +
> >
> >  > > +      if (!is_wwdt_in_closed_window(wdd)) {
> >
> >  > > +                      dev_warn(xilinx_wwdt_wdd->parent, "timer
> > in closed
> >
> >  > window");
> >
> >  > > +                      return -EINVAL;
> >
> >  > > +      }
> >
> >  > > +
> >
> >  > > +      spin_lock(&xdev->spinlock);
> >
> >  > > +
> >
> >  > > +      iowrite32(XWWDT_MWR_MASK, xdev->base +
> >
> >  > XWWDT_MWR_OFFSET);
> >
> >  > > +      /* Disable the Window watchdog timer */
> >
> >  > > +      iowrite32(~(u32)XWWDT_ESR_WEN_MASK,
> >
> >  > > +                        xdev->base + XWWDT_ESR_OFFSET);
> >
> >  > > +
> >
> >  > > +      spin_unlock(&xdev->spinlock);
> >
> >  > > +
> >
> >  > > +      if (watchdog_active(xilinx_wwdt_wdd))
> >
> >  > > +                      clk_disable(xdev->clk);
> >
> >  > > +
> >
> >  >
> >
> >  > The stop function won't be called if the watchdog is not running,
> > ie if
> >
> >  > watchdog_active() returns false.
> >
> >  > I don't undeerstand the logic of clock handling in this driver.
> >
> >  > More on that below.
> >
> >  >
> >
> >  > > +      dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Stopped!\n");
> >
> >  > > +
> >
> >  > > +      return 0;
> >
> >  > > +}
> >
> >  > > +
> >
> >  > > +static int xilinx_wwdt_keepalive(struct watchdog_device *wdd) {
> >
> >  > > +      u32 control_status_reg;
> >
> >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> >
> >  > > +
> >
> >  > > +      /* Refresh in open window is ignored */
> >
> >  > > +      if (!is_wwdt_in_closed_window(wdd))
> >
> >  > > +                      return 0;
> >
> >  > > +
> >
> >  > This is dangerous. There is no reason for userspace to adhere to
> > these
> >
> >  > restrictions.
> >
> >  >
> >
> >  > > +      spin_lock(&xdev->spinlock);
> >
> >  > > +
> >
> >  > > +      iowrite32(XWWDT_MWR_MASK, xdev->base +
> >
> >  > XWWDT_MWR_OFFSET);
> >
> >  > > +      control_status_reg = ioread32(xdev->base +
> > XWWDT_ESR_OFFSET);
> >
> >  > > +      control_status_reg |= XWWDT_ESR_WINT_MASK;
> >
> >  > > +      control_status_reg &= ~XWWDT_ESR_WSW_MASK;
> >
> >  > > +      iowrite32(control_status_reg, xdev->base +
> > XWWDT_ESR_OFFSET);
> >
> >  > > +      control_status_reg = ioread32(xdev->base +
> > XWWDT_ESR_OFFSET);
> >
> >  > > +      control_status_reg |= XWWDT_ESR_WSW_MASK;
> >
> >  > > +      iowrite32(control_status_reg, xdev->base +
> > XWWDT_ESR_OFFSET);
> >
> >  > > +
> >
> >  > > +      spin_unlock(&xdev->spinlock);
> >
> >  > > +
> >
> >  > > +      return 0;
> >
> >  > > +}
> >
> >  > > +
> >
> >  > > +static int xilinx_wwdt_set_timeout(struct watchdog_device *wdd,
> >
> >  > > +
> > unsigned int new_time)
> >
> >  > > +{
> >
> >  > > +      u32 ret = 0;
> >
> >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> >
> >  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> >
> >  > >xilinx_wwdt_wdd;
> >
> >  > > +
> >
> >  > > +      if (!is_wwdt_in_closed_window(wdd)) {
> >
> >  > > +                      dev_warn(xilinx_wwdt_wdd->parent, "timer
> > in closed
> >
> >  > window");
> >
> >  > > +                      return -EINVAL;
> >
> >  > > +      }
> >
> >  > > +
> >
> >  >
> >
> >  > So userspace can clog the log by continuously trying to set the timeout ?
> >
> >  >
> >
> >  > Also, again, this is dangerous. Userspace does not know the window size.
> >
> > user can configure window size.
> >
> >  >
> >
> >  >
> >
> >  > > +      if (new_time < XWWDT_MIN_TIMEOUT ||
> >
> >  > > +          new_time > XWWDT_MAX_TIMEOUT) {
> >
> >  > > +                      dev_warn(xilinx_wwdt_wdd->parent,
> >
> >  > > +                                      "timeout value must be
> > %d<=x<=%d, using %d\n",
> >
> >  > > +                                      XWWDT_MIN_TIMEOUT,
> >
> >  > > +                                      XWWDT_MAX_TIMEOUT,
> > new_time);
> >
> >  > > +                      return -EINVAL;
> >
> >  > > +      }
> >
> >  >
> >
> >  > This is handled by the watchdog core.
> >
> >  >
> >
> >  > > +
> >
> >  > > +      wdd->timeout = new_time;
> >
> >  > > +      wdd->pretimeout = 0;
> >
> >  > > +
> >
> >  > > +      if (watchdog_active(xilinx_wwdt_wdd)) {
> >
> >  > > +                      ret = xilinx_wwdt_start(wdd);
> >
> >  > > +                      if (ret)
> >
> >  > > +
> > dev_dbg(xilinx_wwdt_wdd->parent, "timer start
> >
> >  > failed");
> >
> >  > > +      }
> >
> >  > > +
> >
> >  > > +      return ret;
> >
> >  > > +}
> >
> >  > > +
> >
> >  > > +static int xilinx_wwdt_set_pretimeout(struct watchdog_device
> > *wdd,
> >
> >  > > +                                                            u32
> > new_pretimeout)
> >
> >  > > +{
> >
> >  > > +      u32 ret = 0;
> >
> >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> >
> >  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> >
> >  > >xilinx_wwdt_wdd;
> >
> >  > > +
> >
> >  > > +      if (!is_wwdt_in_closed_window(wdd)) {
> >
> >  > > +                      dev_warn(xilinx_wwdt_wdd->parent, "timer
> > in closed
> >
> >  > window");
> >
> >  > > +                      return -EINVAL;
> >
> >  > > +      }
> >
> >  >
> >
> >  > This restriction is not only dangerous but confusing, and simply
> unacceptable.
> >
> >  > Userspace will get -EINVAL with no idea what is wrong.
> >
> >  > A watchdog daemon will bail out for no good reason.
> >
> >  >
> >
> >  > > +
> >
> >  > > +      if (new_pretimeout < wdd->min_timeout ||
> >
> >  > > +          new_pretimeout >= wdd->timeout)
> >
> >  > > +                      return -EINVAL;
> >
> >  > > +
> >
> >  > This is handled by the watchdog core.
> >
> >  >
> >
> >  > > +      wdd->pretimeout = new_pretimeout;
> >
> >  > > +
> >
> >  > > +      if (watchdog_active(xilinx_wwdt_wdd)) {
> >
> >  > > +                      ret = xilinx_wwdt_start(wdd);
> >
> >  > > +                      if (ret)
> >
> >  > > +
> > dev_dbg(xilinx_wwdt_wdd->parent, "timer start
> >
> >  > failed");
> >
> >  > > +      }
> >
> >  > > +
> >
> >  > > +      return ret;
> >
> >  > > +}
> >
> >  > > +
> >
> >  > > +static void xwwdt_clk_disable_unprepare(void *data) {
> >
> >  > > +      clk_disable_unprepare(data);
> >
> >  > > +}
> >
> >  > > +
> >
> >  > > +static irqreturn_t xilinx_wwdt_isr(int irq, void *wdog_arg) {
> >
> >  > > +      struct xwwdt_device *xdev = wdog_arg;
> >
> >  > > +
> >
> >  > > +      watchdog_notify_pretimeout(&xdev->xilinx_wwdt_wdd);
> >
> >  > > +
> >
> >  > > +      return IRQ_HANDLED;
> >
> >  > > +}
> >
> >  > > +
> >
> >  > > +static const struct watchdog_info xilinx_wwdt_ident = {
> >
> >  > > +      .options = WDIOF_MAGICCLOSE |
> >
> >  > > +                         WDIOF_KEEPALIVEPING |
> >
> >  > > +                         WDIOF_SETTIMEOUT,
> >
> >  > > +      .firmware_version = 1,
> >
> >  > > +      .identity = "xlnx_window watchdog",
> >
> >  > > +};
> >
> >  > > +
> >
> >  > > +static const struct watchdog_info xilinx_wwdt_pretimeout_ident =
> > {
> >
> >  > > +      .options = WDIOF_MAGICCLOSE |
> >
> >  > > +                         WDIOF_KEEPALIVEPING |
> >
> >  > > +                         WDIOF_PRETIMEOUT |
> >
> >  > > +                         WDIOF_SETTIMEOUT,
> >
> >  > > +      .firmware_version = 1,
> >
> >  > > +      .identity = "xlnx_window watchdog",
> >
> >  > > +};
> >
> >  > > +
> >
> >  > > +static const struct watchdog_ops xilinx_wwdt_ops = {
> >
> >  > > +      .owner = THIS_MODULE,
> >
> >  > > +      .start = xilinx_wwdt_start,
> >
> >  > > +      .stop = xilinx_wwdt_stop,
> >
> >  > > +      .ping = xilinx_wwdt_keepalive,
> >
> >  > > +      .set_timeout = xilinx_wwdt_set_timeout,
> >
> >  > > +      .set_pretimeout = xilinx_wwdt_set_pretimeout, };
> >
> >  > > +
> >
> >  > > +static int xwwdt_probe(struct platform_device *pdev) {
> >
> >  > > +      struct device *dev = &pdev->dev;
> >
> >  > > +      struct watchdog_device *xilinx_wwdt_wdd;
> >
> >  > > +      struct xwwdt_device *xdev;
> >
> >  > > +      u32 pre_timeout = 0;
> >
> >  > > +      int ret;
> >
> >  > > +
> >
> >  > > +      xdev = devm_kzalloc(dev, sizeof(*xdev), GFP_KERNEL);
> >
> >  > > +      if (!xdev)
> >
> >  > > +                      return -ENOMEM;
> >
> >  > > +
> >
> >  > > +      xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
> >
> >  > > +      xilinx_wwdt_wdd->info = &xilinx_wwdt_ident;
> >
> >  > > +      xilinx_wwdt_wdd->ops = &xilinx_wwdt_ops;
> >
> >  > > +      xilinx_wwdt_wdd->parent = dev;
> >
> >  > > +
> >
> >  > > +      xdev->base = devm_platform_ioremap_resource(pdev, 0);
> >
> >  > > +      if (IS_ERR(xdev->base))
> >
> >  > > +                      return PTR_ERR(xdev->base);
> >
> >  > > +
> >
> >  > > +      ret = of_property_read_u32(dev->of_node, "pretimeout-sec",
> >
> >  > > +
> > &pre_timeout);
> >
> >  > > +      if (ret)
> >
> >  > > +                      dev_dbg(dev,
> >
> >  > > +                                      "Parameter
> > \"pretimeout-sec\" not found\n");
> >
> >  > > +
> >
> >  > > +      xdev->clk = devm_clk_get(dev, NULL);
> >
> >  > > +      if (IS_ERR(xdev->clk))
> >
> >  > > +                      return PTR_ERR(xdev->clk);
> >
> >  > > +
> >
> >  > > +      ret = clk_get_rate(xdev->clk);
> >
> >  > > +      if (!ret)
> >
> >  > > +                      return -EINVAL;
> >
> >  > > +
> >
> >  > > +      ret = clk_prepare_enable(xdev->clk);
> >
> >  > > +      if (ret) {
> >
> >  > > +                      dev_err(dev, "unable to enable clock\n");
> >
> >  > > +                      return ret;
> >
> >  > > +      }
> >
> >  > > +      ret = devm_add_action_or_reset(dev,
> >
> >  > xwwdt_clk_disable_unprepare,
> >
> >  > > +
> > xdev->clk);
> >
> >  > > +      if (ret)
> >
> >  > > +                      goto err_clk_disable;
> >
> >  > > +
> >
> >  >
> >
> >  > Seems pointless. What happens when you unload the driver ?
> >
> >  >
> >
> >  > > +      xilinx_wwdt_wdd->pretimeout = pre_timeout;
> >
> >  > > +      xilinx_wwdt_wdd->timeout = XWWDT_DEFAULT_TIMEOUT;
> >
> >  > > +      xilinx_wwdt_wdd->min_timeout = XWWDT_MIN_TIMEOUT;
> >
> >  > > +      xilinx_wwdt_wdd->max_timeout = XWWDT_MAX_TIMEOUT;
> >
> >  > > +
> >
> >  > > +      xdev->irq = platform_get_irq_byname(pdev, "wdt");
> >
> >  > > +      if (xdev->irq < 0) {
> >
> >  > > +                      ret = xdev->irq;
> >
> >  > > +                      goto err_clk_disable;
> >
> >  > > +      }
> >
> >  > > +
> >
> >  > > +      if (!devm_request_irq(dev, xdev->irq, xilinx_wwdt_isr,
> >
> >  > > +                                            0, dev_name(dev),
> > xdev)) {
> >
> >  > > +                      xilinx_wwdt_wdd->info =
> > &xilinx_wwdt_pretimeout_ident;
> >
> >  > > +      }
> >
> >  > > +
> >
> >  > > +      ret = watchdog_init_timeout(xilinx_wwdt_wdd,
> >
> >  > > +
> > wwdt_timeout, &pdev->dev);
> >
> >  > > +      if (ret)
> >
> >  > > +                      dev_info(&pdev->dev, "Configured default
> > timeout
> >
> >  > value\n");
> >
> >  > > +
> >
> >  > > +      spin_lock_init(&xdev->spinlock);
> >
> >  > > +      watchdog_set_drvdata(xilinx_wwdt_wdd, xdev);
> >
> >  > > +
> >
> >  > > +      ret = devm_watchdog_register_device(dev, xilinx_wwdt_wdd);
> >
> >  > > +      if (ret)
> >
> >  > > +                      goto err_clk_disable;
> >
> >  > > +
> >
> >  > At this point the watchdog is fully instantiated, and userspace may
> > have
> >
> >  > enabled it.
> >
> >  >
> >
> >  > > +      clk_disable_unprepare(xdev->clk);
> >
> >  > > +
> >
> >  > And now its clock is getting stopped. Actually, it is getting unprepared.
> >
> >  > Does this even work ?
> >
> >  >
> >
> >  > > +      dev_info(dev, "Xilinx Window Watchdog Timer with timeout
> > %ds\n",
> >
> >  > > +                      xilinx_wwdt_wdd->timeout);
> >
> >  > > +
> >
> >  > > +      return 0;
> >
> >  > > +
> >
> >  > > +err_clk_disable:
> >
> >  > > +      clk_disable_unprepare(xdev->clk);
> >
> >  >
> >
> >  > devm_add_action_or_reset() already handles this.
> >
> >  >
> >
> >  > > +      return ret;
> >
> >  > > +}
> >
> >  > > +
> >
> >  > > +/* Mat for of_platform binding */
> >
> >  > > +static const struct of_device_id xwwdt_of_match[] = {
> >
> >  > > +      { .compatible = "xlnx,versal-wwdt-1.0", },
> >
> >  > > +      {},
> >
> >  > > +};
> >
> >  > > +MODULE_DEVICE_TABLE(of, xwwdt_of_match);
> >
> >  > > +
> >
> >  > > +static struct platform_driver xwwdt_driver = {
> >
> >  > > +      .probe = xwwdt_probe,
> >
> >  > > +      .driver = {
> >
> >  > > +                      .name = "Xilinx Window Watchdog",
> >
> >  > > +                      .of_match_table = xwwdt_of_match,
> >
> >  > > +      },
> >
> >  > > +};
> >
> >  > > +
> >
> >  > > +module_platform_driver(xwwdt_driver);
> >
> >  > > +
> >
> >  > > +MODULE_AUTHOR("Neeli Srinivas <sneeli@xilinx.com
> > <mailto:sneeli@xilinx.com>>");
> >
> >  > > +MODULE_DESCRIPTION("Xilinx Window Watchdog driver");
> >
> >  > > +MODULE_LICENSE("GPL");
> >
> >  > >
> >
> > Thanks
> >
> > Srinivas Neeli.
> >

RE: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window watchdog mode

[Srinivas Neeli]

Hi Guenter,

Could you please share your comments on below limitations.


Thanks
Srinivas Neeli

> -----Original Message-----
> From: Srinivas Neeli <sneeli@xilinx.com>
> Sent: Wednesday, September 29, 2021 12:32 PM
> To: Guenter Roeck <linux@roeck-us.net>; Shubhrajyoti Datta
> <shubhraj@xilinx.com>; Srinivas Goud <sgoud@xilinx.com>; Michal Simek
> <michals@xilinx.com>
> Cc: wim@linux-watchdog.org; linux-watchdog@vger.kernel.org; linux-
> kernel@vger.kernel.org; git <git@xilinx.com>
> Subject: RE: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window
> watchdog mode
> 
> Hi Guenter,
> 
> I went through reference "rti_wdt.c" driver. It implemented Window
> watchdog with few limitations.
> Limitations:
> ---------------
> 1) Not able to configure Closed window and Open window separately.
> 	Because of xilinx window watchdog supports separate configurable
> closed and open windows.
> 2) In case of rti driver, if any bad event(error event) occur due to any user
> space event like ping then
>    the watchdog core bypassing the ping call.
>     But in case of xilinx watchdog there are separate register bits for counting
> error events.
> 	So if I implement driver in similar to rti-wdt.c driver, then we can not
> be able read the error events from
> 	the registers.
> 	So is this ok because we are not notifying the errors to user.
> 
> Thanks
> Srinivas Neeli
> 
> > -----Original Message-----
> > From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
> > Sent: Wednesday, July 14, 2021 5:01 PM
> > To: Srinivas Neeli <sneeli@xilinx.com>; Shubhrajyoti Datta
> > <shubhraj@xilinx.com>; Srinivas Goud <sgoud@xilinx.com>; Michal Simek
> > <michals@xilinx.com>
> > Cc: wim@linux-watchdog.org; linux-watchdog@vger.kernel.org; linux-
> > kernel@vger.kernel.org; git <git@xilinx.com>
> > Subject: Re: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window
> > watchdog mode
> >
> > On 7/13/21 10:29 PM, Srinivas Neeli wrote:
> > > Hi Guenter,
> > >
> > > If you are fine with my justification, I will send v2 with update code.
> > >
> >
> > We have at least one more watchdog driver with open/closed window
> > concepts.
> > This is not a "pretimeout". Please see drivers/watchdog/rti_wdt.c for
> > an example on how to handle this; essentially you have to set
> > min_hw_heartbeat_ms to the value of the closed window timeout. The
> > watchdog core then handles the mechanics.
> >
> > You can not use "pretimeout" to set the "closed" window size; this is
> > an ABI abuse. There is no standard ABI for this, so if you want to
> > have it configurable it would have to be a module parameter.
> >
> > Guenter
> >
> > > Thanks
> > > Srinivas Neeli.
> > >
> > > *From:* Srinivas Neeli <sneeli@xilinx.com>
> > > *Sent:* Wednesday, June 9, 2021 12:57 PM
> > > *To:* Guenter Roeck <linux@roeck-us.net>; Shubhrajyoti Datta
> > > <shubhraj@xilinx.com>; Srinivas Goud <sgoud@xilinx.com>; Michal
> > > Simek <michals@xilinx.com>
> > > *Cc:* wim@linux-watchdog.org; linux-watchdog@vger.kernel.org;
> > > linux-kernel@vger.kernel.org; git <git@xilinx.com>
> > > *Subject:* RE: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window
> > > watchdog mode
> > >
> > > Hi Guenter Roeck,
> > >
> > > Thanks for review.
> > >
> > > Versal platform contain System watchdog Timer. It supports two
> > > functions, Those are
> > >
> > > 1) Generic watchdog mode
> > >
> > > 2) Window watchdog mode
> > >
> > > Right now we are implementing window watchdog timer functionality in
> > driver.
> > >
> > > Features of Window watchdog mode:
> > >
> > > - The timer contains two configurable windows( closed and open).
> > >
> > > - The timer has to restart only in open window.
> > >
> > > - If software tries to restart out side of open window it will
> > > generate a
> > reset.
> > >
> > > We have a requirement for window watchdog driver, So I  implemented
> > window watchdog in two scenarios.
> > >
> > > 1) With Pre-timeout
> > >
> > > 2) With without Pre-timeout
> > >
> > > *Scenario 1:*
> > >
> > > With pre-timeout:
> > >
> > > Here we will get two window concept.
> > >
> > > 1) closed window
> > >
> > > 2) Open window
> > >
> > > start to pre-timeout, we are calling "*closed*" window.
> > >
> > >  From pre-timeout to timeout we are calling “*Open*” window.
> > >
> > > *Operations:*
> > >
> > > start
> > >
> > > keep alive(only in open window,  closed window we are ignoring)
> > >
> > > stop
> > >
> > > we don't have permission to refresh/restart our timer in closed
> > > window, So
> > ignoring the keepalive.
> > >
> > > Adjusted code to generate interrupt after completion of closed window.
> > once we cross the closed window we can restart our time anytime.
> > >
> > > Once we reaches to timeout , will get reset signal.
> > >
> > > *Advantage:*
> > >
> > > After getting pre-timeout notification we can reset our timer or can
> > > collect
> > our log.
> > >
> > > once we get interrupt we can conclude our task is not working as
> expected.
> > >
> > > So we can takecare of our tasks.
> > >
> > > *Scenario 2:*
> > >
> > > with out pre-timeout:
> > >
> > > It will work like general watchdog timer.
> > >
> > > we can run keepalive anytime(as there is no closed window, only open
> > window present).
> > >
> > > Once we reaches to time out, will get reset.
> > >
> > > *Operations:*
> > >
> > > start
> > >
> > > keep alive
> > >
> > > stop
> > >
> > > For more details:
> > >
> > > https://www.xilinx.com/support/documentation/architecture-
> > manuals/am01
> > > 1-versal-acap-trm.pdf
> > > <https://www.xilinx.com/support/documentation/architecture-
> > manuals/am0
> > > 11-versal-acap-trm.pdf>
> > >
> > > major comments will update in V2.
> > >
> > >  > -----Original Message-----
> > >
> > >  > From: Guenter Roeck <groeck7@gmail.com
> > <mailto:groeck7@gmail.com>>
> > > On Behalf Of Guenter Roeck
> > >
> > >  > Sent: Thursday, May 27, 2021 8:09 PM
> > >
> > >  > To: Srinivas Neeli <sneeli@xilinx.com
> > > <mailto:sneeli@xilinx.com>>; Shubhrajyoti Datta
> > >
> > >  > <shubhraj@xilinx.com <mailto:shubhraj@xilinx.com>>; Srinivas Goud
> > > <sgoud@xilinx.com <mailto:sgoud@xilinx.com>>; Michal Simek
> > >
> > >  > <michals@xilinx.com <mailto:michals@xilinx.com>>
> > >
> > >  > Cc: wim@linux-watchdog.org <mailto:wim@linux-watchdog.org>;
> > > linux-watchdog@vger.kernel.org
> > > <mailto:linux-watchdog@vger.kernel.org>; linux-
> > >
> > >  > kernel@vger.kernel.org <mailto:kernel@vger.kernel.org>; git
> > > <git@xilinx.com <mailto:git@xilinx.com>>
> > >
> > >  > Subject: Re: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window
> > >
> > >  > watchdog mode
> > >
> > >  >
> > >
> > >  > The subject is confusing. This patch does not add "Versal Window
> > > watchdog
> > >
> > >  > mode", it adds a driver which supports the Versal Window watchdog.
> > > The
> > >
> > >  > subject should be something like "watchdog: Add Versal Window
> > > watchdog
> > >
> > >  > driver".
> > >
> > >  >
> > >
> > >  > On 5/27/21 2:57 AM, Srinivas Neeli wrote:
> > >
> > >  > > Versal watchdog driver uses Window watchdog mode. Window
> > watchdog
> > >
> > >  > > timer(WWDT) contains closed(first) and open(second) window with
> > >
> > >  > > 32 bit width. WWDT will generate an interrupt after the first
> > > window
> > >
> > >  > > timeout and reset signal after the second window timeout.
> > > Timeout and
> > >
> > >  > > Pre-timeout configuration, Stop and Refresh trigger only in
> > > open
> > >
> > >  > > window.
> > >
> > >  >
> > >
> > >  > Does that mean that userspace can not send a keepalive before the
> > >
> > >  > pretimeout expires ? That is not how this is supposed to work. If
> > > that is the
> > >
> > >  > case, this is not a pretimeout. Pretimeout is supposed to be used
> > > for
> > >
> > >  > emergency handling, such as triggering a crash dump. The above
> > > description
> > >
> > >  > as well as the code suggests that an interrupt is all but mandatory.
> > >
> > >  >
> > >
> > >  > Assuming that is all the case, ie that keepalive is only possible
> > > after the
> > >
> > >  > interrupt was received, and that timeout updates are also only
> > > possible after
> > >
> > >  > an interrupt was received, one possible handling would to record
> > > that a
> > >
> > >  > keepalive was received, and to record that a request to update
> > > the timeout
> > >
> > >  > was received if that happens while the window is closed. Then,
> > > when the
> > >
> > >  > interrupt is received, those actions can be applied. Otherwise,
> > > if there was
> > >
> > >  > no keepalive request prior to the interrupt, the interrupt
> > > handler would call
> > >
> > >  > watchdog_notify_pretimeout().
> > >
> > >  >
> > >
> > >  > Of course, this is all just guesswork.
> > >
> > >  >
> > >
> > >  > More comments below.
> > >
> > >  >
> > >
> > >  > Guenter
> > >
> > >  >
> > >
> > >  > >
> > >
> > >  > > Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com
> > > <mailto:srinivas.neeli@xilinx.com>>
> > >
> > >  > > ---
> > >
> > >  > >   drivers/watchdog/Kconfig       |  16 ++
> > >
> > >  > >   drivers/watchdog/Makefile      |   1 +
> > >
> > >  > >   drivers/watchdog/xilinx_wwdt.c | 382
> > >
> > >  > +++++++++++++++++++++++++++++++++
> > >
> > >  > >   3 files changed, 399 insertions(+)
> > >
> > >  > >   create mode 100644 drivers/watchdog/xilinx_wwdt.c
> > >
> > >  > >
> > >
> > >  > > diff --git a/drivers/watchdog/Kconfig
> > > b/drivers/watchdog/Kconfig index
> > >
> > >  > > 355100dad60a..2ed17f278783 100644
> > >
> > >  > > --- a/drivers/watchdog/Kconfig
> > >
> > >  > > +++ b/drivers/watchdog/Kconfig
> > >
> > >  > > @@ -307,6 +307,22 @@ config XILINX_WATCHDOG
> > >
> > >  > >            To compile this driver as a module, choose M here:
> > > the
> > >
> > >  > >            module will be called of_xilinx_wdt.
> > >
> > >  > >
> > >
> > >  > > +config XILINX_WINDOW_WATCHDOG
> > >
> > >  > > +      tristate "Xilinx Window Watchdog timer"
> > >
> > >  > > +      depends on HAS_IOMEM
> > >
> > >  > > +      select WATCHDOG_CORE
> > >
> > >  > > +      help
> > >
> > >  > > +        Window Watchdog driver for the versal_wwdt ip core.
> > >
> > >  > > +        Window watchdog timer(WWDT) contains closed(first) and
> > >
> > >  > > +        open(second) window with 32 bit width. WWDT will
> > > generate
> > >
> > >  > > +        an interrupt after the first window timeout and reset
> > >
> > >  > > +        signal after the second window timeout. Timeout and
> > >
> > >  > > +        Pre-timeout configuration, Stop and Refresh trigger
> > >
> > >  > > +        only in open window.
> > >
> > >  > > +
> > >
> > >  > > +        To compile this driver as a module, choose M here: the
> > >
> > >  > > +        module will be called xilinx_wwdt.
> > >
> > >  > > +
> > >
> > >  > >   config ZIIRAVE_WATCHDOG
> > >
> > >  > >          tristate "Zodiac RAVE Watchdog Timer"
> > >
> > >  > >          depends on I2C
> > >
> > >  > > diff --git a/drivers/watchdog/Makefile
> > > b/drivers/watchdog/Makefile
> > >
> > >  > > index a7eade8b4d45..97d10c3d39c7 100644
> > >
> > >  > > --- a/drivers/watchdog/Makefile
> > >
> > >  > > +++ b/drivers/watchdog/Makefile
> > >
> > >  > > @@ -148,6 +148,7 @@ obj-$(CONFIG_M54xx_WATCHDOG) +=
> > >
> > >  > m54xx_wdt.o
> > >
> > >  > >
> > >
> > >  > >   # MicroBlaze Architecture
> > >
> > >  > >   obj-$(CONFIG_XILINX_WATCHDOG) += of_xilinx_wdt.o
> > >
> > >  > > +obj-$(CONFIG_XILINX_WINDOW_WATCHDOG) += xilinx_wwdt.o
> > >
> > >  > >
> > >
> > >  > >   # MIPS Architecture
> > >
> > >  > >   obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o diff --git
> > >
> > >  > > a/drivers/watchdog/xilinx_wwdt.c
> > > b/drivers/watchdog/xilinx_wwdt.c new
> > >
> > >  > > file mode 100644 index 000000000000..8fa2cb2225e8
> > >
> > >  > > --- /dev/null
> > >
> > >  > > +++ b/drivers/watchdog/xilinx_wwdt.c
> > >
> > >  > > @@ -0,0 +1,382 @@
> > >
> > >  > > +// SPDX-License-Identifier: GPL-2.0
> > >
> > >  > > +/*
> > >
> > >  > > + * Window Watchdog Device Driver for Xilinx Versal WWDT
> > >
> > >  > > + *
> > >
> > >  > > + * (C) Copyright 2021 Xilinx, Inc.
> > >
> > >  > > + */
> > >
> > >  > > +
> > >
> > >  > > +#include <linux/clk.h>
> > >
> > >  > > +#include <linux/interrupt.h>
> > >
> > >  > > +#include <linux/io.h>
> > >
> > >  > > +#include <linux/ioport.h>
> > >
> > >  > > +#include <linux/of_device.h>
> > >
> > >  > > +#include <linux/of_address.h>
> > >
> > >  > > +#include <linux/module.h>
> > >
> > >  > > +#include <linux/watchdog.h>
> > >
> > >  > > +
> > >
> > >  > > +#define XWWDT_DEFAULT_TIMEOUT           40
> > >
> > >  > > +#define XWWDT_MIN_TIMEOUT    1
> > >
> > >  > > +#define XWWDT_MAX_TIMEOUT   42
> > >
> > >  > > +
> > >
> > >  > > +/* Register offsets for the WWdt device */
> > >
> > >  > > +#define XWWDT_MWR_OFFSET      0x00
> > >
> > >  > > +#define XWWDT_ESR_OFFSET          0x04
> > >
> > >  > > +#define XWWDT_FCR_OFFSET          0x08
> > >
> > >  > > +#define XWWDT_FWR_OFFSET        0x0c
> > >
> > >  > > +#define XWWDT_SWR_OFFSET        0x10
> > >
> > >  > > +
> > >
> > >  > > +/* Master Write Control Register Masks */
> > >
> > >  > > +#define XWWDT_MWR_MASK                         BIT(0)
> > >
> > >  > > +
> > >
> > >  > > +/* Enable and Status Register Masks */
> > >
> > >  > > +#define XWWDT_ESR_WINT_MASK BIT(16)
> > >
> > >  > > +#define XWWDT_ESR_WSW_MASK BIT(8)
> > >
> > >  > > +#define XWWDT_ESR_WEN_MASK BIT(0)
> > >
> > >  > > +
> > >
> > >  > > +/* Function control Register Masks */
> > >
> > >  > > +#define XWWDT_SBC_MASK                            0xFF00
> > >
> > >  > > +#define XWWDT_SBC_SHIFT                             16
> > >
> > >  > > +#define XWWDT_BSS_MASK                             0xC0
> > >
> > >  > > +
> > >
> > >  > > +static int wwdt_timeout;
> > >
> > >  > > +
> > >
> > >  > > +module_param(wwdt_timeout, int, 0644);
> > >
> > >  > MODULE_PARM_DESC(wwdt_timeout,
> > >
> > >  > > +                      "Watchdog time in seconds. (default="
> > >
> > >  > > +                      __MODULE_STRING(XWWDT_DEFAULT_TIMEOUT)
> > > ")");
> > >
> > >  > > +
> > >
> > >  > > +struct xwwdt_device {
> > >
> > >  > > +      void __iomem *base;
> > >
> > >  > > +      spinlock_t spinlock; /* spinlock for register handling
> > > */
> > >
> > >  > > +      struct watchdog_device xilinx_wwdt_wdd;
> > >
> > >  > > +      struct clk *clk;
> > >
> > >  > > +      int irq;
> > >
> > >  > > +};
> > >
> > >  > > +
> > >
> > >  > > +static int is_wwdt_in_closed_window(struct watchdog_device
> > > *wdd)
> > >
> > >  >
> > >
> > >  > should return bool
> > >
> > > Will update in V2.
> > >
> > >  >
> > >
> > >  > > +{
> > >
> > >  > > +      u32 control_status_reg;
> > >
> > >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> > >
> > >  > > +
> > >
> > >  > > +      spin_lock(&xdev->spinlock);
> > >
> > >  > > +      control_status_reg = ioread32(xdev->base +
> > > XWWDT_ESR_OFFSET);
> > >
> > >  > > +      spin_unlock(&xdev->spinlock);
> > >
> > >  > > +      if (control_status_reg & XWWDT_ESR_WEN_MASK)
> > >
> > >  > > +                      if (!(control_status_reg &
> > > XWWDT_ESR_WSW_MASK))
> > >
> > >  > > +                                      return 0;
> > >
> > >  > > +
> > >
> > >  > > +      return 1;
> > >
> > >  >
> > >
> > >  > Can be written as expresion without if statement
> > >
> > > Will update in V2
> > >
> > >  >
> > >
> > >  > > +}
> > >
> > >  > > +
> > >
> > >  > > +static int xilinx_wwdt_start(struct watchdog_device *wdd) {
> > >
> > >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> > >
> > >  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> > >
> > >  > >xilinx_wwdt_wdd;
> > >
> > >  > > +      u64 time_out, pre_timeout, count;
> > >
> > >  > > +      u32 control_status_reg, fcr;
> > >
> > >  > > +      int ret;
> > >
> > >  > > +
> > >
> > >  > > +      count = clk_get_rate(xdev->clk);
> > >
> > >  > > +      if (!count)
> > >
> > >  > > +                      return -EINVAL;
> > >
> > >  > > +
> > >
> > >  > Is there a reason to believe that the clock rate can change ?
> > >
> > >  > If not I would suggest to read it once and store it in struct
> xwwdt_device.
> > >
> > > Will update in V2.
> > >
> > >  >
> > >
> > >  > > +      /* Calculate timeout count */
> > >
> > >  > > +      pre_timeout = count * wdd->pretimeout;
> > >
> > >  > > +      time_out = count * wdd->timeout;
> > >
> > >  > > +      if (!watchdog_active(xilinx_wwdt_wdd)) {
> > >
> > >  > > +                      ret  = clk_enable(xdev->clk);
> > >
> > >  >
> > >
> > >  > This is at the very least confusing.
> > >
> > >  > The last action in the probe function is to call
> > > clk_disable_unprepare(),
> > >
> > >  > meaning the clock should not be prepared here. How can it be
> > > enabled
> > >
> > >  > without being prepared ?
> > >
> > > Will update in V2
> > >
> > >  >
> > >
> > >  > > +                      if (ret) {
> > >
> > >  > > +                                      dev_err(wdd->parent,
> > > "Failed to enable clock\n");
> > >
> > >  > > +                                      return ret;
> > >
> > >  > > +                      }
> > >
> > >  > > +      }
> > >
> > >  > > +
> > >
> > >  > I think it would be better to separate the functions to
> > > start/stop the clock
> > >
> > >  > from the function to update/enable the watchdog. The use of
> > >
> > >  > watchdog_active() combined with
> > >
> > >  > clk_enable/clk_disable/clk_prepare_enable/clk_disable_unprepare
> > >
> > >  > is confusing and makes it all but impossible to review the driver.
> > >
> > >  >
> > >
> > >  > > +      spin_lock(&xdev->spinlock);
> > >
> > >  > > +      iowrite32(XWWDT_MWR_MASK, xdev->base +
> > >
> > >  > XWWDT_MWR_OFFSET);
> > >
> > >  > > +      iowrite32(~(u32)XWWDT_ESR_WEN_MASK,
> > >
> > >  > > +                        xdev->base + XWWDT_ESR_OFFSET);
> > >
> > >  > > +
> > >
> > >  > > +      if (pre_timeout) {
> > >
> > >  > > +                      iowrite32((u32)(time_out - pre_timeout),
> > >
> > >  > > +                                        xdev->base +
> > > XWWDT_FWR_OFFSET);
> > >
> > >  > > +                      iowrite32((u32)pre_timeout, xdev->base +
> > >
> > >  > XWWDT_SWR_OFFSET);
> > >
> > >  > > +                      fcr = ioread32(xdev->base +
> > > XWWDT_SWR_OFFSET);
> > >
> > >  > > +                      fcr = (fcr >> XWWDT_SBC_SHIFT) &
> > > XWWDT_SBC_MASK;
> > >
> > >  > > +                      fcr = fcr | XWWDT_BSS_MASK;
> > >
> > >  > > +                      iowrite32(fcr, xdev->base +
> > > XWWDT_FCR_OFFSET);
> > >
> > >  > > +      } else {
> > >
> > >  > > +                      iowrite32((u32)pre_timeout,
> > >
> > >  > > +                                        xdev->base +
> > > XWWDT_FWR_OFFSET);
> > >
> > >  > > +                      iowrite32((u32)time_out, xdev->base +
> > >
> > >  > XWWDT_SWR_OFFSET);
> > >
> > >  > > +                      iowrite32(0x0, xdev->base +
> > > XWWDT_FCR_OFFSET);
> > >
> > >  > > +      }
> > >
> > >  > > +
> > >
> > >  > > +      /* Enable the window watchdog timer */
> > >
> > >  > > +      control_status_reg = ioread32(xdev->base +
> > > XWWDT_ESR_OFFSET);
> > >
> > >  > > +      control_status_reg |= XWWDT_ESR_WEN_MASK;
> > >
> > >  > > +      iowrite32(control_status_reg, xdev->base +
> > > XWWDT_ESR_OFFSET);
> > >
> > >  > > +
> > >
> > >  > > +      spin_unlock(&xdev->spinlock);
> > >
> > >  > > +
> > >
> > >  > > +      dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Started!\n");
> > >
> > >  > > +
> > >
> > >  > > +      return 0;
> > >
> > >  > > +}
> > >
> > >  > > +
> > >
> > >  > > +static int xilinx_wwdt_stop(struct watchdog_device *wdd) {
> > >
> > >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> > >
> > >  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> > >
> > >  > >xilinx_wwdt_wdd;
> > >
> > >  > > +
> > >
> > >  > > +      if (!is_wwdt_in_closed_window(wdd)) {
> > >
> > >  > > +                      dev_warn(xilinx_wwdt_wdd->parent, "timer
> > > in closed
> > >
> > >  > window");
> > >
> > >  > > +                      return -EINVAL;
> > >
> > >  > > +      }
> > >
> > >  > > +
> > >
> > >  > > +      spin_lock(&xdev->spinlock);
> > >
> > >  > > +
> > >
> > >  > > +      iowrite32(XWWDT_MWR_MASK, xdev->base +
> > >
> > >  > XWWDT_MWR_OFFSET);
> > >
> > >  > > +      /* Disable the Window watchdog timer */
> > >
> > >  > > +      iowrite32(~(u32)XWWDT_ESR_WEN_MASK,
> > >
> > >  > > +                        xdev->base + XWWDT_ESR_OFFSET);
> > >
> > >  > > +
> > >
> > >  > > +      spin_unlock(&xdev->spinlock);
> > >
> > >  > > +
> > >
> > >  > > +      if (watchdog_active(xilinx_wwdt_wdd))
> > >
> > >  > > +                      clk_disable(xdev->clk);
> > >
> > >  > > +
> > >
> > >  >
> > >
> > >  > The stop function won't be called if the watchdog is not running,
> > > ie if
> > >
> > >  > watchdog_active() returns false.
> > >
> > >  > I don't undeerstand the logic of clock handling in this driver.
> > >
> > >  > More on that below.
> > >
> > >  >
> > >
> > >  > > +      dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Stopped!\n");
> > >
> > >  > > +
> > >
> > >  > > +      return 0;
> > >
> > >  > > +}
> > >
> > >  > > +
> > >
> > >  > > +static int xilinx_wwdt_keepalive(struct watchdog_device *wdd)
> > > {
> > >
> > >  > > +      u32 control_status_reg;
> > >
> > >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> > >
> > >  > > +
> > >
> > >  > > +      /* Refresh in open window is ignored */
> > >
> > >  > > +      if (!is_wwdt_in_closed_window(wdd))
> > >
> > >  > > +                      return 0;
> > >
> > >  > > +
> > >
> > >  > This is dangerous. There is no reason for userspace to adhere to
> > > these
> > >
> > >  > restrictions.
> > >
> > >  >
> > >
> > >  > > +      spin_lock(&xdev->spinlock);
> > >
> > >  > > +
> > >
> > >  > > +      iowrite32(XWWDT_MWR_MASK, xdev->base +
> > >
> > >  > XWWDT_MWR_OFFSET);
> > >
> > >  > > +      control_status_reg = ioread32(xdev->base +
> > > XWWDT_ESR_OFFSET);
> > >
> > >  > > +      control_status_reg |= XWWDT_ESR_WINT_MASK;
> > >
> > >  > > +      control_status_reg &= ~XWWDT_ESR_WSW_MASK;
> > >
> > >  > > +      iowrite32(control_status_reg, xdev->base +
> > > XWWDT_ESR_OFFSET);
> > >
> > >  > > +      control_status_reg = ioread32(xdev->base +
> > > XWWDT_ESR_OFFSET);
> > >
> > >  > > +      control_status_reg |= XWWDT_ESR_WSW_MASK;
> > >
> > >  > > +      iowrite32(control_status_reg, xdev->base +
> > > XWWDT_ESR_OFFSET);
> > >
> > >  > > +
> > >
> > >  > > +      spin_unlock(&xdev->spinlock);
> > >
> > >  > > +
> > >
> > >  > > +      return 0;
> > >
> > >  > > +}
> > >
> > >  > > +
> > >
> > >  > > +static int xilinx_wwdt_set_timeout(struct watchdog_device
> > > *wdd,
> > >
> > >  > > +
> > > unsigned int new_time)
> > >
> > >  > > +{
> > >
> > >  > > +      u32 ret = 0;
> > >
> > >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> > >
> > >  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> > >
> > >  > >xilinx_wwdt_wdd;
> > >
> > >  > > +
> > >
> > >  > > +      if (!is_wwdt_in_closed_window(wdd)) {
> > >
> > >  > > +                      dev_warn(xilinx_wwdt_wdd->parent, "timer
> > > in closed
> > >
> > >  > window");
> > >
> > >  > > +                      return -EINVAL;
> > >
> > >  > > +      }
> > >
> > >  > > +
> > >
> > >  >
> > >
> > >  > So userspace can clog the log by continuously trying to set the timeout
> ?
> > >
> > >  >
> > >
> > >  > Also, again, this is dangerous. Userspace does not know the window
> size.
> > >
> > > user can configure window size.
> > >
> > >  >
> > >
> > >  >
> > >
> > >  > > +      if (new_time < XWWDT_MIN_TIMEOUT ||
> > >
> > >  > > +          new_time > XWWDT_MAX_TIMEOUT) {
> > >
> > >  > > +                      dev_warn(xilinx_wwdt_wdd->parent,
> > >
> > >  > > +                                      "timeout value must be
> > > %d<=x<=%d, using %d\n",
> > >
> > >  > > +                                      XWWDT_MIN_TIMEOUT,
> > >
> > >  > > +                                      XWWDT_MAX_TIMEOUT,
> > > new_time);
> > >
> > >  > > +                      return -EINVAL;
> > >
> > >  > > +      }
> > >
> > >  >
> > >
> > >  > This is handled by the watchdog core.
> > >
> > >  >
> > >
> > >  > > +
> > >
> > >  > > +      wdd->timeout = new_time;
> > >
> > >  > > +      wdd->pretimeout = 0;
> > >
> > >  > > +
> > >
> > >  > > +      if (watchdog_active(xilinx_wwdt_wdd)) {
> > >
> > >  > > +                      ret = xilinx_wwdt_start(wdd);
> > >
> > >  > > +                      if (ret)
> > >
> > >  > > +
> > > dev_dbg(xilinx_wwdt_wdd->parent, "timer start
> > >
> > >  > failed");
> > >
> > >  > > +      }
> > >
> > >  > > +
> > >
> > >  > > +      return ret;
> > >
> > >  > > +}
> > >
> > >  > > +
> > >
> > >  > > +static int xilinx_wwdt_set_pretimeout(struct watchdog_device
> > > *wdd,
> > >
> > >  > > +
> > > u32
> > > new_pretimeout)
> > >
> > >  > > +{
> > >
> > >  > > +      u32 ret = 0;
> > >
> > >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> > >
> > >  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> > >
> > >  > >xilinx_wwdt_wdd;
> > >
> > >  > > +
> > >
> > >  > > +      if (!is_wwdt_in_closed_window(wdd)) {
> > >
> > >  > > +                      dev_warn(xilinx_wwdt_wdd->parent, "timer
> > > in closed
> > >
> > >  > window");
> > >
> > >  > > +                      return -EINVAL;
> > >
> > >  > > +      }
> > >
> > >  >
> > >
> > >  > This restriction is not only dangerous but confusing, and simply
> > unacceptable.
> > >
> > >  > Userspace will get -EINVAL with no idea what is wrong.
> > >
> > >  > A watchdog daemon will bail out for no good reason.
> > >
> > >  >
> > >
> > >  > > +
> > >
> > >  > > +      if (new_pretimeout < wdd->min_timeout ||
> > >
> > >  > > +          new_pretimeout >= wdd->timeout)
> > >
> > >  > > +                      return -EINVAL;
> > >
> > >  > > +
> > >
> > >  > This is handled by the watchdog core.
> > >
> > >  >
> > >
> > >  > > +      wdd->pretimeout = new_pretimeout;
> > >
> > >  > > +
> > >
> > >  > > +      if (watchdog_active(xilinx_wwdt_wdd)) {
> > >
> > >  > > +                      ret = xilinx_wwdt_start(wdd);
> > >
> > >  > > +                      if (ret)
> > >
> > >  > > +
> > > dev_dbg(xilinx_wwdt_wdd->parent, "timer start
> > >
> > >  > failed");
> > >
> > >  > > +      }
> > >
> > >  > > +
> > >
> > >  > > +      return ret;
> > >
> > >  > > +}
> > >
> > >  > > +
> > >
> > >  > > +static void xwwdt_clk_disable_unprepare(void *data) {
> > >
> > >  > > +      clk_disable_unprepare(data);
> > >
> > >  > > +}
> > >
> > >  > > +
> > >
> > >  > > +static irqreturn_t xilinx_wwdt_isr(int irq, void *wdog_arg) {
> > >
> > >  > > +      struct xwwdt_device *xdev = wdog_arg;
> > >
> > >  > > +
> > >
> > >  > > +      watchdog_notify_pretimeout(&xdev->xilinx_wwdt_wdd);
> > >
> > >  > > +
> > >
> > >  > > +      return IRQ_HANDLED;
> > >
> > >  > > +}
> > >
> > >  > > +
> > >
> > >  > > +static const struct watchdog_info xilinx_wwdt_ident = {
> > >
> > >  > > +      .options = WDIOF_MAGICCLOSE |
> > >
> > >  > > +                         WDIOF_KEEPALIVEPING |
> > >
> > >  > > +                         WDIOF_SETTIMEOUT,
> > >
> > >  > > +      .firmware_version = 1,
> > >
> > >  > > +      .identity = "xlnx_window watchdog",
> > >
> > >  > > +};
> > >
> > >  > > +
> > >
> > >  > > +static const struct watchdog_info xilinx_wwdt_pretimeout_ident
> > > = {
> > >
> > >  > > +      .options = WDIOF_MAGICCLOSE |
> > >
> > >  > > +                         WDIOF_KEEPALIVEPING |
> > >
> > >  > > +                         WDIOF_PRETIMEOUT |
> > >
> > >  > > +                         WDIOF_SETTIMEOUT,
> > >
> > >  > > +      .firmware_version = 1,
> > >
> > >  > > +      .identity = "xlnx_window watchdog",
> > >
> > >  > > +};
> > >
> > >  > > +
> > >
> > >  > > +static const struct watchdog_ops xilinx_wwdt_ops = {
> > >
> > >  > > +      .owner = THIS_MODULE,
> > >
> > >  > > +      .start = xilinx_wwdt_start,
> > >
> > >  > > +      .stop = xilinx_wwdt_stop,
> > >
> > >  > > +      .ping = xilinx_wwdt_keepalive,
> > >
> > >  > > +      .set_timeout = xilinx_wwdt_set_timeout,
> > >
> > >  > > +      .set_pretimeout = xilinx_wwdt_set_pretimeout, };
> > >
> > >  > > +
> > >
> > >  > > +static int xwwdt_probe(struct platform_device *pdev) {
> > >
> > >  > > +      struct device *dev = &pdev->dev;
> > >
> > >  > > +      struct watchdog_device *xilinx_wwdt_wdd;
> > >
> > >  > > +      struct xwwdt_device *xdev;
> > >
> > >  > > +      u32 pre_timeout = 0;
> > >
> > >  > > +      int ret;
> > >
> > >  > > +
> > >
> > >  > > +      xdev = devm_kzalloc(dev, sizeof(*xdev), GFP_KERNEL);
> > >
> > >  > > +      if (!xdev)
> > >
> > >  > > +                      return -ENOMEM;
> > >
> > >  > > +
> > >
> > >  > > +      xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
> > >
> > >  > > +      xilinx_wwdt_wdd->info = &xilinx_wwdt_ident;
> > >
> > >  > > +      xilinx_wwdt_wdd->ops = &xilinx_wwdt_ops;
> > >
> > >  > > +      xilinx_wwdt_wdd->parent = dev;
> > >
> > >  > > +
> > >
> > >  > > +      xdev->base = devm_platform_ioremap_resource(pdev, 0);
> > >
> > >  > > +      if (IS_ERR(xdev->base))
> > >
> > >  > > +                      return PTR_ERR(xdev->base);
> > >
> > >  > > +
> > >
> > >  > > +      ret = of_property_read_u32(dev->of_node,
> > > "pretimeout-sec",
> > >
> > >  > > +
> > > &pre_timeout);
> > >
> > >  > > +      if (ret)
> > >
> > >  > > +                      dev_dbg(dev,
> > >
> > >  > > +                                      "Parameter
> > > \"pretimeout-sec\" not found\n");
> > >
> > >  > > +
> > >
> > >  > > +      xdev->clk = devm_clk_get(dev, NULL);
> > >
> > >  > > +      if (IS_ERR(xdev->clk))
> > >
> > >  > > +                      return PTR_ERR(xdev->clk);
> > >
> > >  > > +
> > >
> > >  > > +      ret = clk_get_rate(xdev->clk);
> > >
> > >  > > +      if (!ret)
> > >
> > >  > > +                      return -EINVAL;
> > >
> > >  > > +
> > >
> > >  > > +      ret = clk_prepare_enable(xdev->clk);
> > >
> > >  > > +      if (ret) {
> > >
> > >  > > +                      dev_err(dev, "unable to enable
> > > clock\n");
> > >
> > >  > > +                      return ret;
> > >
> > >  > > +      }
> > >
> > >  > > +      ret = devm_add_action_or_reset(dev,
> > >
> > >  > xwwdt_clk_disable_unprepare,
> > >
> > >  > > +
> > > xdev->clk);
> > >
> > >  > > +      if (ret)
> > >
> > >  > > +                      goto err_clk_disable;
> > >
> > >  > > +
> > >
> > >  >
> > >
> > >  > Seems pointless. What happens when you unload the driver ?
> > >
> > >  >
> > >
> > >  > > +      xilinx_wwdt_wdd->pretimeout = pre_timeout;
> > >
> > >  > > +      xilinx_wwdt_wdd->timeout = XWWDT_DEFAULT_TIMEOUT;
> > >
> > >  > > +      xilinx_wwdt_wdd->min_timeout = XWWDT_MIN_TIMEOUT;
> > >
> > >  > > +      xilinx_wwdt_wdd->max_timeout = XWWDT_MAX_TIMEOUT;
> > >
> > >  > > +
> > >
> > >  > > +      xdev->irq = platform_get_irq_byname(pdev, "wdt");
> > >
> > >  > > +      if (xdev->irq < 0) {
> > >
> > >  > > +                      ret = xdev->irq;
> > >
> > >  > > +                      goto err_clk_disable;
> > >
> > >  > > +      }
> > >
> > >  > > +
> > >
> > >  > > +      if (!devm_request_irq(dev, xdev->irq, xilinx_wwdt_isr,
> > >
> > >  > > +                                            0, dev_name(dev),
> > > xdev)) {
> > >
> > >  > > +                      xilinx_wwdt_wdd->info =
> > > &xilinx_wwdt_pretimeout_ident;
> > >
> > >  > > +      }
> > >
> > >  > > +
> > >
> > >  > > +      ret = watchdog_init_timeout(xilinx_wwdt_wdd,
> > >
> > >  > > +
> > > wwdt_timeout, &pdev->dev);
> > >
> > >  > > +      if (ret)
> > >
> > >  > > +                      dev_info(&pdev->dev, "Configured default
> > > timeout
> > >
> > >  > value\n");
> > >
> > >  > > +
> > >
> > >  > > +      spin_lock_init(&xdev->spinlock);
> > >
> > >  > > +      watchdog_set_drvdata(xilinx_wwdt_wdd, xdev);
> > >
> > >  > > +
> > >
> > >  > > +      ret = devm_watchdog_register_device(dev,
> > > xilinx_wwdt_wdd);
> > >
> > >  > > +      if (ret)
> > >
> > >  > > +                      goto err_clk_disable;
> > >
> > >  > > +
> > >
> > >  > At this point the watchdog is fully instantiated, and userspace
> > > may have
> > >
> > >  > enabled it.
> > >
> > >  >
> > >
> > >  > > +      clk_disable_unprepare(xdev->clk);
> > >
> > >  > > +
> > >
> > >  > And now its clock is getting stopped. Actually, it is getting unprepared.
> > >
> > >  > Does this even work ?
> > >
> > >  >
> > >
> > >  > > +      dev_info(dev, "Xilinx Window Watchdog Timer with timeout
> > > %ds\n",
> > >
> > >  > > +                      xilinx_wwdt_wdd->timeout);
> > >
> > >  > > +
> > >
> > >  > > +      return 0;
> > >
> > >  > > +
> > >
> > >  > > +err_clk_disable:
> > >
> > >  > > +      clk_disable_unprepare(xdev->clk);
> > >
> > >  >
> > >
> > >  > devm_add_action_or_reset() already handles this.
> > >
> > >  >
> > >
> > >  > > +      return ret;
> > >
> > >  > > +}
> > >
> > >  > > +
> > >
> > >  > > +/* Mat for of_platform binding */
> > >
> > >  > > +static const struct of_device_id xwwdt_of_match[] = {
> > >
> > >  > > +      { .compatible = "xlnx,versal-wwdt-1.0", },
> > >
> > >  > > +      {},
> > >
> > >  > > +};
> > >
> > >  > > +MODULE_DEVICE_TABLE(of, xwwdt_of_match);
> > >
> > >  > > +
> > >
> > >  > > +static struct platform_driver xwwdt_driver = {
> > >
> > >  > > +      .probe = xwwdt_probe,
> > >
> > >  > > +      .driver = {
> > >
> > >  > > +                      .name = "Xilinx Window Watchdog",
> > >
> > >  > > +                      .of_match_table = xwwdt_of_match,
> > >
> > >  > > +      },
> > >
> > >  > > +};
> > >
> > >  > > +
> > >
> > >  > > +module_platform_driver(xwwdt_driver);
> > >
> > >  > > +
> > >
> > >  > > +MODULE_AUTHOR("Neeli Srinivas <sneeli@xilinx.com
> > > <mailto:sneeli@xilinx.com>>");
> > >
> > >  > > +MODULE_DESCRIPTION("Xilinx Window Watchdog driver");
> > >
> > >  > > +MODULE_LICENSE("GPL");
> > >
> > >  > >
> > >
> > > Thanks
> > >
> > > Srinivas Neeli.
> > >

Re: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window watchdog mode

[Guenter Roeck]

On Mon, Oct 18, 2021 at 09:23:23AM +0000, Srinivas Neeli wrote:
> Hi Guenter,
> 
> Could you please share your comments on below limitations.
> 
> 
> Thanks
> Srinivas Neeli
> 
> > -----Original Message-----
> > From: Srinivas Neeli <sneeli@xilinx.com>
> > Sent: Wednesday, September 29, 2021 12:32 PM
> > To: Guenter Roeck <linux@roeck-us.net>; Shubhrajyoti Datta
> > <shubhraj@xilinx.com>; Srinivas Goud <sgoud@xilinx.com>; Michal Simek
> > <michals@xilinx.com>
> > Cc: wim@linux-watchdog.org; linux-watchdog@vger.kernel.org; linux-
> > kernel@vger.kernel.org; git <git@xilinx.com>
> > Subject: RE: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window
> > watchdog mode
> > 
> > Hi Guenter,
> > 
> > I went through reference "rti_wdt.c" driver. It implemented Window
> > watchdog with few limitations.
> > Limitations:
> > ---------------
> > 1) Not able to configure Closed window and Open window separately.
> > 	Because of xilinx window watchdog supports separate configurable
> > closed and open windows.
> > 2) In case of rti driver, if any bad event(error event) occur due to any user
> > space event like ping then
> >    the watchdog core bypassing the ping call.
> >     But in case of xilinx watchdog there are separate register bits for counting
> > error events.
> > 	So if I implement driver in similar to rti-wdt.c driver, then we can not
> > be able read the error events from
> > 	the registers.
> > 	So is this ok because we are not notifying the errors to user.
> > 

I can only repeat: You can not misuse pretimeout to configure the minimum
window size. If you want that configurable, maybe you can use a module
parameter. Not sure I understand the comment about error events. If an
error event is userspace pinging the watchdog within the closed window,
sure, then you can not use min_hw_heartbeat_ms to indicate the minimum
window size. I don't really understand the point of this (or why anyone
would want such a "window" watchdog in the first place), but then I don't
have to understand it. Just remember to explain to your customers and
document in the driver what happens if userspace pings the watchdog too
early (eg that the ping will be ignored and that the watchdog will reboot
the system unless another ping happens within the configured window).
Either case, again, you can not (mis-)use pretimeout for anything
but for configuring a pretimeout.

Guenter

> > Thanks
> > Srinivas Neeli
> > 
> > > -----Original Message-----
> > > From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
> > > Sent: Wednesday, July 14, 2021 5:01 PM
> > > To: Srinivas Neeli <sneeli@xilinx.com>; Shubhrajyoti Datta
> > > <shubhraj@xilinx.com>; Srinivas Goud <sgoud@xilinx.com>; Michal Simek
> > > <michals@xilinx.com>
> > > Cc: wim@linux-watchdog.org; linux-watchdog@vger.kernel.org; linux-
> > > kernel@vger.kernel.org; git <git@xilinx.com>
> > > Subject: Re: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window
> > > watchdog mode
> > >
> > > On 7/13/21 10:29 PM, Srinivas Neeli wrote:
> > > > Hi Guenter,
> > > >
> > > > If you are fine with my justification, I will send v2 with update code.
> > > >
> > >
> > > We have at least one more watchdog driver with open/closed window
> > > concepts.
> > > This is not a "pretimeout". Please see drivers/watchdog/rti_wdt.c for
> > > an example on how to handle this; essentially you have to set
> > > min_hw_heartbeat_ms to the value of the closed window timeout. The
> > > watchdog core then handles the mechanics.
> > >
> > > You can not use "pretimeout" to set the "closed" window size; this is
> > > an ABI abuse. There is no standard ABI for this, so if you want to
> > > have it configurable it would have to be a module parameter.
> > >
> > > Guenter
> > >
> > > > Thanks
> > > > Srinivas Neeli.
> > > >
> > > > *From:* Srinivas Neeli <sneeli@xilinx.com>
> > > > *Sent:* Wednesday, June 9, 2021 12:57 PM
> > > > *To:* Guenter Roeck <linux@roeck-us.net>; Shubhrajyoti Datta
> > > > <shubhraj@xilinx.com>; Srinivas Goud <sgoud@xilinx.com>; Michal
> > > > Simek <michals@xilinx.com>
> > > > *Cc:* wim@linux-watchdog.org; linux-watchdog@vger.kernel.org;
> > > > linux-kernel@vger.kernel.org; git <git@xilinx.com>
> > > > *Subject:* RE: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window
> > > > watchdog mode
> > > >
> > > > Hi Guenter Roeck,
> > > >
> > > > Thanks for review.
> > > >
> > > > Versal platform contain System watchdog Timer. It supports two
> > > > functions, Those are
> > > >
> > > > 1) Generic watchdog mode
> > > >
> > > > 2) Window watchdog mode
> > > >
> > > > Right now we are implementing window watchdog timer functionality in
> > > driver.
> > > >
> > > > Features of Window watchdog mode:
> > > >
> > > > - The timer contains two configurable windows( closed and open).
> > > >
> > > > - The timer has to restart only in open window.
> > > >
> > > > - If software tries to restart out side of open window it will
> > > > generate a
> > > reset.
> > > >
> > > > We have a requirement for window watchdog driver, So I  implemented
> > > window watchdog in two scenarios.
> > > >
> > > > 1) With Pre-timeout
> > > >
> > > > 2) With without Pre-timeout
> > > >
> > > > *Scenario 1:*
> > > >
> > > > With pre-timeout:
> > > >
> > > > Here we will get two window concept.
> > > >
> > > > 1) closed window
> > > >
> > > > 2) Open window
> > > >
> > > > start to pre-timeout, we are calling "*closed*" window.
> > > >
> > > >  From pre-timeout to timeout we are calling “*Open*” window.
> > > >
> > > > *Operations:*
> > > >
> > > > start
> > > >
> > > > keep alive(only in open window,  closed window we are ignoring)
> > > >
> > > > stop
> > > >
> > > > we don't have permission to refresh/restart our timer in closed
> > > > window, So
> > > ignoring the keepalive.
> > > >
> > > > Adjusted code to generate interrupt after completion of closed window.
> > > once we cross the closed window we can restart our time anytime.
> > > >
> > > > Once we reaches to timeout , will get reset signal.
> > > >
> > > > *Advantage:*
> > > >
> > > > After getting pre-timeout notification we can reset our timer or can
> > > > collect
> > > our log.
> > > >
> > > > once we get interrupt we can conclude our task is not working as
> > expected.
> > > >
> > > > So we can takecare of our tasks.
> > > >
> > > > *Scenario 2:*
> > > >
> > > > with out pre-timeout:
> > > >
> > > > It will work like general watchdog timer.
> > > >
> > > > we can run keepalive anytime(as there is no closed window, only open
> > > window present).
> > > >
> > > > Once we reaches to time out, will get reset.
> > > >
> > > > *Operations:*
> > > >
> > > > start
> > > >
> > > > keep alive
> > > >
> > > > stop
> > > >
> > > > For more details:
> > > >
> > > > https://www.xilinx.com/support/documentation/architecture-
> > > manuals/am01
> > > > 1-versal-acap-trm.pdf
> > > > <https://www.xilinx.com/support/documentation/architecture-
> > > manuals/am0
> > > > 11-versal-acap-trm.pdf>
> > > >
> > > > major comments will update in V2.
> > > >
> > > >  > -----Original Message-----
> > > >
> > > >  > From: Guenter Roeck <groeck7@gmail.com
> > > <mailto:groeck7@gmail.com>>
> > > > On Behalf Of Guenter Roeck
> > > >
> > > >  > Sent: Thursday, May 27, 2021 8:09 PM
> > > >
> > > >  > To: Srinivas Neeli <sneeli@xilinx.com
> > > > <mailto:sneeli@xilinx.com>>; Shubhrajyoti Datta
> > > >
> > > >  > <shubhraj@xilinx.com <mailto:shubhraj@xilinx.com>>; Srinivas Goud
> > > > <sgoud@xilinx.com <mailto:sgoud@xilinx.com>>; Michal Simek
> > > >
> > > >  > <michals@xilinx.com <mailto:michals@xilinx.com>>
> > > >
> > > >  > Cc: wim@linux-watchdog.org <mailto:wim@linux-watchdog.org>;
> > > > linux-watchdog@vger.kernel.org
> > > > <mailto:linux-watchdog@vger.kernel.org>; linux-
> > > >
> > > >  > kernel@vger.kernel.org <mailto:kernel@vger.kernel.org>; git
> > > > <git@xilinx.com <mailto:git@xilinx.com>>
> > > >
> > > >  > Subject: Re: [PATCH 2/3] watchdog: xilinx_wwdt: Add Versal Window
> > > >
> > > >  > watchdog mode
> > > >
> > > >  >
> > > >
> > > >  > The subject is confusing. This patch does not add "Versal Window
> > > > watchdog
> > > >
> > > >  > mode", it adds a driver which supports the Versal Window watchdog.
> > > > The
> > > >
> > > >  > subject should be something like "watchdog: Add Versal Window
> > > > watchdog
> > > >
> > > >  > driver".
> > > >
> > > >  >
> > > >
> > > >  > On 5/27/21 2:57 AM, Srinivas Neeli wrote:
> > > >
> > > >  > > Versal watchdog driver uses Window watchdog mode. Window
> > > watchdog
> > > >
> > > >  > > timer(WWDT) contains closed(first) and open(second) window with
> > > >
> > > >  > > 32 bit width. WWDT will generate an interrupt after the first
> > > > window
> > > >
> > > >  > > timeout and reset signal after the second window timeout.
> > > > Timeout and
> > > >
> > > >  > > Pre-timeout configuration, Stop and Refresh trigger only in
> > > > open
> > > >
> > > >  > > window.
> > > >
> > > >  >
> > > >
> > > >  > Does that mean that userspace can not send a keepalive before the
> > > >
> > > >  > pretimeout expires ? That is not how this is supposed to work. If
> > > > that is the
> > > >
> > > >  > case, this is not a pretimeout. Pretimeout is supposed to be used
> > > > for
> > > >
> > > >  > emergency handling, such as triggering a crash dump. The above
> > > > description
> > > >
> > > >  > as well as the code suggests that an interrupt is all but mandatory.
> > > >
> > > >  >
> > > >
> > > >  > Assuming that is all the case, ie that keepalive is only possible
> > > > after the
> > > >
> > > >  > interrupt was received, and that timeout updates are also only
> > > > possible after
> > > >
> > > >  > an interrupt was received, one possible handling would to record
> > > > that a
> > > >
> > > >  > keepalive was received, and to record that a request to update
> > > > the timeout
> > > >
> > > >  > was received if that happens while the window is closed. Then,
> > > > when the
> > > >
> > > >  > interrupt is received, those actions can be applied. Otherwise,
> > > > if there was
> > > >
> > > >  > no keepalive request prior to the interrupt, the interrupt
> > > > handler would call
> > > >
> > > >  > watchdog_notify_pretimeout().
> > > >
> > > >  >
> > > >
> > > >  > Of course, this is all just guesswork.
> > > >
> > > >  >
> > > >
> > > >  > More comments below.
> > > >
> > > >  >
> > > >
> > > >  > Guenter
> > > >
> > > >  >
> > > >
> > > >  > >
> > > >
> > > >  > > Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com
> > > > <mailto:srinivas.neeli@xilinx.com>>
> > > >
> > > >  > > ---
> > > >
> > > >  > >   drivers/watchdog/Kconfig       |  16 ++
> > > >
> > > >  > >   drivers/watchdog/Makefile      |   1 +
> > > >
> > > >  > >   drivers/watchdog/xilinx_wwdt.c | 382
> > > >
> > > >  > +++++++++++++++++++++++++++++++++
> > > >
> > > >  > >   3 files changed, 399 insertions(+)
> > > >
> > > >  > >   create mode 100644 drivers/watchdog/xilinx_wwdt.c
> > > >
> > > >  > >
> > > >
> > > >  > > diff --git a/drivers/watchdog/Kconfig
> > > > b/drivers/watchdog/Kconfig index
> > > >
> > > >  > > 355100dad60a..2ed17f278783 100644
> > > >
> > > >  > > --- a/drivers/watchdog/Kconfig
> > > >
> > > >  > > +++ b/drivers/watchdog/Kconfig
> > > >
> > > >  > > @@ -307,6 +307,22 @@ config XILINX_WATCHDOG
> > > >
> > > >  > >            To compile this driver as a module, choose M here:
> > > > the
> > > >
> > > >  > >            module will be called of_xilinx_wdt.
> > > >
> > > >  > >
> > > >
> > > >  > > +config XILINX_WINDOW_WATCHDOG
> > > >
> > > >  > > +      tristate "Xilinx Window Watchdog timer"
> > > >
> > > >  > > +      depends on HAS_IOMEM
> > > >
> > > >  > > +      select WATCHDOG_CORE
> > > >
> > > >  > > +      help
> > > >
> > > >  > > +        Window Watchdog driver for the versal_wwdt ip core.
> > > >
> > > >  > > +        Window watchdog timer(WWDT) contains closed(first) and
> > > >
> > > >  > > +        open(second) window with 32 bit width. WWDT will
> > > > generate
> > > >
> > > >  > > +        an interrupt after the first window timeout and reset
> > > >
> > > >  > > +        signal after the second window timeout. Timeout and
> > > >
> > > >  > > +        Pre-timeout configuration, Stop and Refresh trigger
> > > >
> > > >  > > +        only in open window.
> > > >
> > > >  > > +
> > > >
> > > >  > > +        To compile this driver as a module, choose M here: the
> > > >
> > > >  > > +        module will be called xilinx_wwdt.
> > > >
> > > >  > > +
> > > >
> > > >  > >   config ZIIRAVE_WATCHDOG
> > > >
> > > >  > >          tristate "Zodiac RAVE Watchdog Timer"
> > > >
> > > >  > >          depends on I2C
> > > >
> > > >  > > diff --git a/drivers/watchdog/Makefile
> > > > b/drivers/watchdog/Makefile
> > > >
> > > >  > > index a7eade8b4d45..97d10c3d39c7 100644
> > > >
> > > >  > > --- a/drivers/watchdog/Makefile
> > > >
> > > >  > > +++ b/drivers/watchdog/Makefile
> > > >
> > > >  > > @@ -148,6 +148,7 @@ obj-$(CONFIG_M54xx_WATCHDOG) +=
> > > >
> > > >  > m54xx_wdt.o
> > > >
> > > >  > >
> > > >
> > > >  > >   # MicroBlaze Architecture
> > > >
> > > >  > >   obj-$(CONFIG_XILINX_WATCHDOG) += of_xilinx_wdt.o
> > > >
> > > >  > > +obj-$(CONFIG_XILINX_WINDOW_WATCHDOG) += xilinx_wwdt.o
> > > >
> > > >  > >
> > > >
> > > >  > >   # MIPS Architecture
> > > >
> > > >  > >   obj-$(CONFIG_ATH79_WDT) += ath79_wdt.o diff --git
> > > >
> > > >  > > a/drivers/watchdog/xilinx_wwdt.c
> > > > b/drivers/watchdog/xilinx_wwdt.c new
> > > >
> > > >  > > file mode 100644 index 000000000000..8fa2cb2225e8
> > > >
> > > >  > > --- /dev/null
> > > >
> > > >  > > +++ b/drivers/watchdog/xilinx_wwdt.c
> > > >
> > > >  > > @@ -0,0 +1,382 @@
> > > >
> > > >  > > +// SPDX-License-Identifier: GPL-2.0
> > > >
> > > >  > > +/*
> > > >
> > > >  > > + * Window Watchdog Device Driver for Xilinx Versal WWDT
> > > >
> > > >  > > + *
> > > >
> > > >  > > + * (C) Copyright 2021 Xilinx, Inc.
> > > >
> > > >  > > + */
> > > >
> > > >  > > +
> > > >
> > > >  > > +#include <linux/clk.h>
> > > >
> > > >  > > +#include <linux/interrupt.h>
> > > >
> > > >  > > +#include <linux/io.h>
> > > >
> > > >  > > +#include <linux/ioport.h>
> > > >
> > > >  > > +#include <linux/of_device.h>
> > > >
> > > >  > > +#include <linux/of_address.h>
> > > >
> > > >  > > +#include <linux/module.h>
> > > >
> > > >  > > +#include <linux/watchdog.h>
> > > >
> > > >  > > +
> > > >
> > > >  > > +#define XWWDT_DEFAULT_TIMEOUT           40
> > > >
> > > >  > > +#define XWWDT_MIN_TIMEOUT    1
> > > >
> > > >  > > +#define XWWDT_MAX_TIMEOUT   42
> > > >
> > > >  > > +
> > > >
> > > >  > > +/* Register offsets for the WWdt device */
> > > >
> > > >  > > +#define XWWDT_MWR_OFFSET      0x00
> > > >
> > > >  > > +#define XWWDT_ESR_OFFSET          0x04
> > > >
> > > >  > > +#define XWWDT_FCR_OFFSET          0x08
> > > >
> > > >  > > +#define XWWDT_FWR_OFFSET        0x0c
> > > >
> > > >  > > +#define XWWDT_SWR_OFFSET        0x10
> > > >
> > > >  > > +
> > > >
> > > >  > > +/* Master Write Control Register Masks */
> > > >
> > > >  > > +#define XWWDT_MWR_MASK                         BIT(0)
> > > >
> > > >  > > +
> > > >
> > > >  > > +/* Enable and Status Register Masks */
> > > >
> > > >  > > +#define XWWDT_ESR_WINT_MASK BIT(16)
> > > >
> > > >  > > +#define XWWDT_ESR_WSW_MASK BIT(8)
> > > >
> > > >  > > +#define XWWDT_ESR_WEN_MASK BIT(0)
> > > >
> > > >  > > +
> > > >
> > > >  > > +/* Function control Register Masks */
> > > >
> > > >  > > +#define XWWDT_SBC_MASK                            0xFF00
> > > >
> > > >  > > +#define XWWDT_SBC_SHIFT                             16
> > > >
> > > >  > > +#define XWWDT_BSS_MASK                             0xC0
> > > >
> > > >  > > +
> > > >
> > > >  > > +static int wwdt_timeout;
> > > >
> > > >  > > +
> > > >
> > > >  > > +module_param(wwdt_timeout, int, 0644);
> > > >
> > > >  > MODULE_PARM_DESC(wwdt_timeout,
> > > >
> > > >  > > +                      "Watchdog time in seconds. (default="
> > > >
> > > >  > > +                      __MODULE_STRING(XWWDT_DEFAULT_TIMEOUT)
> > > > ")");
> > > >
> > > >  > > +
> > > >
> > > >  > > +struct xwwdt_device {
> > > >
> > > >  > > +      void __iomem *base;
> > > >
> > > >  > > +      spinlock_t spinlock; /* spinlock for register handling
> > > > */
> > > >
> > > >  > > +      struct watchdog_device xilinx_wwdt_wdd;
> > > >
> > > >  > > +      struct clk *clk;
> > > >
> > > >  > > +      int irq;
> > > >
> > > >  > > +};
> > > >
> > > >  > > +
> > > >
> > > >  > > +static int is_wwdt_in_closed_window(struct watchdog_device
> > > > *wdd)
> > > >
> > > >  >
> > > >
> > > >  > should return bool
> > > >
> > > > Will update in V2.
> > > >
> > > >  >
> > > >
> > > >  > > +{
> > > >
> > > >  > > +      u32 control_status_reg;
> > > >
> > > >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      spin_lock(&xdev->spinlock);
> > > >
> > > >  > > +      control_status_reg = ioread32(xdev->base +
> > > > XWWDT_ESR_OFFSET);
> > > >
> > > >  > > +      spin_unlock(&xdev->spinlock);
> > > >
> > > >  > > +      if (control_status_reg & XWWDT_ESR_WEN_MASK)
> > > >
> > > >  > > +                      if (!(control_status_reg &
> > > > XWWDT_ESR_WSW_MASK))
> > > >
> > > >  > > +                                      return 0;
> > > >
> > > >  > > +
> > > >
> > > >  > > +      return 1;
> > > >
> > > >  >
> > > >
> > > >  > Can be written as expresion without if statement
> > > >
> > > > Will update in V2
> > > >
> > > >  >
> > > >
> > > >  > > +}
> > > >
> > > >  > > +
> > > >
> > > >  > > +static int xilinx_wwdt_start(struct watchdog_device *wdd) {
> > > >
> > > >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> > > >
> > > >  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> > > >
> > > >  > >xilinx_wwdt_wdd;
> > > >
> > > >  > > +      u64 time_out, pre_timeout, count;
> > > >
> > > >  > > +      u32 control_status_reg, fcr;
> > > >
> > > >  > > +      int ret;
> > > >
> > > >  > > +
> > > >
> > > >  > > +      count = clk_get_rate(xdev->clk);
> > > >
> > > >  > > +      if (!count)
> > > >
> > > >  > > +                      return -EINVAL;
> > > >
> > > >  > > +
> > > >
> > > >  > Is there a reason to believe that the clock rate can change ?
> > > >
> > > >  > If not I would suggest to read it once and store it in struct
> > xwwdt_device.
> > > >
> > > > Will update in V2.
> > > >
> > > >  >
> > > >
> > > >  > > +      /* Calculate timeout count */
> > > >
> > > >  > > +      pre_timeout = count * wdd->pretimeout;
> > > >
> > > >  > > +      time_out = count * wdd->timeout;
> > > >
> > > >  > > +      if (!watchdog_active(xilinx_wwdt_wdd)) {
> > > >
> > > >  > > +                      ret  = clk_enable(xdev->clk);
> > > >
> > > >  >
> > > >
> > > >  > This is at the very least confusing.
> > > >
> > > >  > The last action in the probe function is to call
> > > > clk_disable_unprepare(),
> > > >
> > > >  > meaning the clock should not be prepared here. How can it be
> > > > enabled
> > > >
> > > >  > without being prepared ?
> > > >
> > > > Will update in V2
> > > >
> > > >  >
> > > >
> > > >  > > +                      if (ret) {
> > > >
> > > >  > > +                                      dev_err(wdd->parent,
> > > > "Failed to enable clock\n");
> > > >
> > > >  > > +                                      return ret;
> > > >
> > > >  > > +                      }
> > > >
> > > >  > > +      }
> > > >
> > > >  > > +
> > > >
> > > >  > I think it would be better to separate the functions to
> > > > start/stop the clock
> > > >
> > > >  > from the function to update/enable the watchdog. The use of
> > > >
> > > >  > watchdog_active() combined with
> > > >
> > > >  > clk_enable/clk_disable/clk_prepare_enable/clk_disable_unprepare
> > > >
> > > >  > is confusing and makes it all but impossible to review the driver.
> > > >
> > > >  >
> > > >
> > > >  > > +      spin_lock(&xdev->spinlock);
> > > >
> > > >  > > +      iowrite32(XWWDT_MWR_MASK, xdev->base +
> > > >
> > > >  > XWWDT_MWR_OFFSET);
> > > >
> > > >  > > +      iowrite32(~(u32)XWWDT_ESR_WEN_MASK,
> > > >
> > > >  > > +                        xdev->base + XWWDT_ESR_OFFSET);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      if (pre_timeout) {
> > > >
> > > >  > > +                      iowrite32((u32)(time_out - pre_timeout),
> > > >
> > > >  > > +                                        xdev->base +
> > > > XWWDT_FWR_OFFSET);
> > > >
> > > >  > > +                      iowrite32((u32)pre_timeout, xdev->base +
> > > >
> > > >  > XWWDT_SWR_OFFSET);
> > > >
> > > >  > > +                      fcr = ioread32(xdev->base +
> > > > XWWDT_SWR_OFFSET);
> > > >
> > > >  > > +                      fcr = (fcr >> XWWDT_SBC_SHIFT) &
> > > > XWWDT_SBC_MASK;
> > > >
> > > >  > > +                      fcr = fcr | XWWDT_BSS_MASK;
> > > >
> > > >  > > +                      iowrite32(fcr, xdev->base +
> > > > XWWDT_FCR_OFFSET);
> > > >
> > > >  > > +      } else {
> > > >
> > > >  > > +                      iowrite32((u32)pre_timeout,
> > > >
> > > >  > > +                                        xdev->base +
> > > > XWWDT_FWR_OFFSET);
> > > >
> > > >  > > +                      iowrite32((u32)time_out, xdev->base +
> > > >
> > > >  > XWWDT_SWR_OFFSET);
> > > >
> > > >  > > +                      iowrite32(0x0, xdev->base +
> > > > XWWDT_FCR_OFFSET);
> > > >
> > > >  > > +      }
> > > >
> > > >  > > +
> > > >
> > > >  > > +      /* Enable the window watchdog timer */
> > > >
> > > >  > > +      control_status_reg = ioread32(xdev->base +
> > > > XWWDT_ESR_OFFSET);
> > > >
> > > >  > > +      control_status_reg |= XWWDT_ESR_WEN_MASK;
> > > >
> > > >  > > +      iowrite32(control_status_reg, xdev->base +
> > > > XWWDT_ESR_OFFSET);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      spin_unlock(&xdev->spinlock);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Started!\n");
> > > >
> > > >  > > +
> > > >
> > > >  > > +      return 0;
> > > >
> > > >  > > +}
> > > >
> > > >  > > +
> > > >
> > > >  > > +static int xilinx_wwdt_stop(struct watchdog_device *wdd) {
> > > >
> > > >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> > > >
> > > >  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> > > >
> > > >  > >xilinx_wwdt_wdd;
> > > >
> > > >  > > +
> > > >
> > > >  > > +      if (!is_wwdt_in_closed_window(wdd)) {
> > > >
> > > >  > > +                      dev_warn(xilinx_wwdt_wdd->parent, "timer
> > > > in closed
> > > >
> > > >  > window");
> > > >
> > > >  > > +                      return -EINVAL;
> > > >
> > > >  > > +      }
> > > >
> > > >  > > +
> > > >
> > > >  > > +      spin_lock(&xdev->spinlock);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      iowrite32(XWWDT_MWR_MASK, xdev->base +
> > > >
> > > >  > XWWDT_MWR_OFFSET);
> > > >
> > > >  > > +      /* Disable the Window watchdog timer */
> > > >
> > > >  > > +      iowrite32(~(u32)XWWDT_ESR_WEN_MASK,
> > > >
> > > >  > > +                        xdev->base + XWWDT_ESR_OFFSET);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      spin_unlock(&xdev->spinlock);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      if (watchdog_active(xilinx_wwdt_wdd))
> > > >
> > > >  > > +                      clk_disable(xdev->clk);
> > > >
> > > >  > > +
> > > >
> > > >  >
> > > >
> > > >  > The stop function won't be called if the watchdog is not running,
> > > > ie if
> > > >
> > > >  > watchdog_active() returns false.
> > > >
> > > >  > I don't undeerstand the logic of clock handling in this driver.
> > > >
> > > >  > More on that below.
> > > >
> > > >  >
> > > >
> > > >  > > +      dev_dbg(xilinx_wwdt_wdd->parent, "Watchdog Stopped!\n");
> > > >
> > > >  > > +
> > > >
> > > >  > > +      return 0;
> > > >
> > > >  > > +}
> > > >
> > > >  > > +
> > > >
> > > >  > > +static int xilinx_wwdt_keepalive(struct watchdog_device *wdd)
> > > > {
> > > >
> > > >  > > +      u32 control_status_reg;
> > > >
> > > >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      /* Refresh in open window is ignored */
> > > >
> > > >  > > +      if (!is_wwdt_in_closed_window(wdd))
> > > >
> > > >  > > +                      return 0;
> > > >
> > > >  > > +
> > > >
> > > >  > This is dangerous. There is no reason for userspace to adhere to
> > > > these
> > > >
> > > >  > restrictions.
> > > >
> > > >  >
> > > >
> > > >  > > +      spin_lock(&xdev->spinlock);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      iowrite32(XWWDT_MWR_MASK, xdev->base +
> > > >
> > > >  > XWWDT_MWR_OFFSET);
> > > >
> > > >  > > +      control_status_reg = ioread32(xdev->base +
> > > > XWWDT_ESR_OFFSET);
> > > >
> > > >  > > +      control_status_reg |= XWWDT_ESR_WINT_MASK;
> > > >
> > > >  > > +      control_status_reg &= ~XWWDT_ESR_WSW_MASK;
> > > >
> > > >  > > +      iowrite32(control_status_reg, xdev->base +
> > > > XWWDT_ESR_OFFSET);
> > > >
> > > >  > > +      control_status_reg = ioread32(xdev->base +
> > > > XWWDT_ESR_OFFSET);
> > > >
> > > >  > > +      control_status_reg |= XWWDT_ESR_WSW_MASK;
> > > >
> > > >  > > +      iowrite32(control_status_reg, xdev->base +
> > > > XWWDT_ESR_OFFSET);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      spin_unlock(&xdev->spinlock);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      return 0;
> > > >
> > > >  > > +}
> > > >
> > > >  > > +
> > > >
> > > >  > > +static int xilinx_wwdt_set_timeout(struct watchdog_device
> > > > *wdd,
> > > >
> > > >  > > +
> > > > unsigned int new_time)
> > > >
> > > >  > > +{
> > > >
> > > >  > > +      u32 ret = 0;
> > > >
> > > >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> > > >
> > > >  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> > > >
> > > >  > >xilinx_wwdt_wdd;
> > > >
> > > >  > > +
> > > >
> > > >  > > +      if (!is_wwdt_in_closed_window(wdd)) {
> > > >
> > > >  > > +                      dev_warn(xilinx_wwdt_wdd->parent, "timer
> > > > in closed
> > > >
> > > >  > window");
> > > >
> > > >  > > +                      return -EINVAL;
> > > >
> > > >  > > +      }
> > > >
> > > >  > > +
> > > >
> > > >  >
> > > >
> > > >  > So userspace can clog the log by continuously trying to set the timeout
> > ?
> > > >
> > > >  >
> > > >
> > > >  > Also, again, this is dangerous. Userspace does not know the window
> > size.
> > > >
> > > > user can configure window size.
> > > >
> > > >  >
> > > >
> > > >  >
> > > >
> > > >  > > +      if (new_time < XWWDT_MIN_TIMEOUT ||
> > > >
> > > >  > > +          new_time > XWWDT_MAX_TIMEOUT) {
> > > >
> > > >  > > +                      dev_warn(xilinx_wwdt_wdd->parent,
> > > >
> > > >  > > +                                      "timeout value must be
> > > > %d<=x<=%d, using %d\n",
> > > >
> > > >  > > +                                      XWWDT_MIN_TIMEOUT,
> > > >
> > > >  > > +                                      XWWDT_MAX_TIMEOUT,
> > > > new_time);
> > > >
> > > >  > > +                      return -EINVAL;
> > > >
> > > >  > > +      }
> > > >
> > > >  >
> > > >
> > > >  > This is handled by the watchdog core.
> > > >
> > > >  >
> > > >
> > > >  > > +
> > > >
> > > >  > > +      wdd->timeout = new_time;
> > > >
> > > >  > > +      wdd->pretimeout = 0;
> > > >
> > > >  > > +
> > > >
> > > >  > > +      if (watchdog_active(xilinx_wwdt_wdd)) {
> > > >
> > > >  > > +                      ret = xilinx_wwdt_start(wdd);
> > > >
> > > >  > > +                      if (ret)
> > > >
> > > >  > > +
> > > > dev_dbg(xilinx_wwdt_wdd->parent, "timer start
> > > >
> > > >  > failed");
> > > >
> > > >  > > +      }
> > > >
> > > >  > > +
> > > >
> > > >  > > +      return ret;
> > > >
> > > >  > > +}
> > > >
> > > >  > > +
> > > >
> > > >  > > +static int xilinx_wwdt_set_pretimeout(struct watchdog_device
> > > > *wdd,
> > > >
> > > >  > > +
> > > > u32
> > > > new_pretimeout)
> > > >
> > > >  > > +{
> > > >
> > > >  > > +      u32 ret = 0;
> > > >
> > > >  > > +      struct xwwdt_device *xdev = watchdog_get_drvdata(wdd);
> > > >
> > > >  > > +      struct watchdog_device *xilinx_wwdt_wdd = &xdev-
> > > >
> > > >  > >xilinx_wwdt_wdd;
> > > >
> > > >  > > +
> > > >
> > > >  > > +      if (!is_wwdt_in_closed_window(wdd)) {
> > > >
> > > >  > > +                      dev_warn(xilinx_wwdt_wdd->parent, "timer
> > > > in closed
> > > >
> > > >  > window");
> > > >
> > > >  > > +                      return -EINVAL;
> > > >
> > > >  > > +      }
> > > >
> > > >  >
> > > >
> > > >  > This restriction is not only dangerous but confusing, and simply
> > > unacceptable.
> > > >
> > > >  > Userspace will get -EINVAL with no idea what is wrong.
> > > >
> > > >  > A watchdog daemon will bail out for no good reason.
> > > >
> > > >  >
> > > >
> > > >  > > +
> > > >
> > > >  > > +      if (new_pretimeout < wdd->min_timeout ||
> > > >
> > > >  > > +          new_pretimeout >= wdd->timeout)
> > > >
> > > >  > > +                      return -EINVAL;
> > > >
> > > >  > > +
> > > >
> > > >  > This is handled by the watchdog core.
> > > >
> > > >  >
> > > >
> > > >  > > +      wdd->pretimeout = new_pretimeout;
> > > >
> > > >  > > +
> > > >
> > > >  > > +      if (watchdog_active(xilinx_wwdt_wdd)) {
> > > >
> > > >  > > +                      ret = xilinx_wwdt_start(wdd);
> > > >
> > > >  > > +                      if (ret)
> > > >
> > > >  > > +
> > > > dev_dbg(xilinx_wwdt_wdd->parent, "timer start
> > > >
> > > >  > failed");
> > > >
> > > >  > > +      }
> > > >
> > > >  > > +
> > > >
> > > >  > > +      return ret;
> > > >
> > > >  > > +}
> > > >
> > > >  > > +
> > > >
> > > >  > > +static void xwwdt_clk_disable_unprepare(void *data) {
> > > >
> > > >  > > +      clk_disable_unprepare(data);
> > > >
> > > >  > > +}
> > > >
> > > >  > > +
> > > >
> > > >  > > +static irqreturn_t xilinx_wwdt_isr(int irq, void *wdog_arg) {
> > > >
> > > >  > > +      struct xwwdt_device *xdev = wdog_arg;
> > > >
> > > >  > > +
> > > >
> > > >  > > +      watchdog_notify_pretimeout(&xdev->xilinx_wwdt_wdd);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      return IRQ_HANDLED;
> > > >
> > > >  > > +}
> > > >
> > > >  > > +
> > > >
> > > >  > > +static const struct watchdog_info xilinx_wwdt_ident = {
> > > >
> > > >  > > +      .options = WDIOF_MAGICCLOSE |
> > > >
> > > >  > > +                         WDIOF_KEEPALIVEPING |
> > > >
> > > >  > > +                         WDIOF_SETTIMEOUT,
> > > >
> > > >  > > +      .firmware_version = 1,
> > > >
> > > >  > > +      .identity = "xlnx_window watchdog",
> > > >
> > > >  > > +};
> > > >
> > > >  > > +
> > > >
> > > >  > > +static const struct watchdog_info xilinx_wwdt_pretimeout_ident
> > > > = {
> > > >
> > > >  > > +      .options = WDIOF_MAGICCLOSE |
> > > >
> > > >  > > +                         WDIOF_KEEPALIVEPING |
> > > >
> > > >  > > +                         WDIOF_PRETIMEOUT |
> > > >
> > > >  > > +                         WDIOF_SETTIMEOUT,
> > > >
> > > >  > > +      .firmware_version = 1,
> > > >
> > > >  > > +      .identity = "xlnx_window watchdog",
> > > >
> > > >  > > +};
> > > >
> > > >  > > +
> > > >
> > > >  > > +static const struct watchdog_ops xilinx_wwdt_ops = {
> > > >
> > > >  > > +      .owner = THIS_MODULE,
> > > >
> > > >  > > +      .start = xilinx_wwdt_start,
> > > >
> > > >  > > +      .stop = xilinx_wwdt_stop,
> > > >
> > > >  > > +      .ping = xilinx_wwdt_keepalive,
> > > >
> > > >  > > +      .set_timeout = xilinx_wwdt_set_timeout,
> > > >
> > > >  > > +      .set_pretimeout = xilinx_wwdt_set_pretimeout, };
> > > >
> > > >  > > +
> > > >
> > > >  > > +static int xwwdt_probe(struct platform_device *pdev) {
> > > >
> > > >  > > +      struct device *dev = &pdev->dev;
> > > >
> > > >  > > +      struct watchdog_device *xilinx_wwdt_wdd;
> > > >
> > > >  > > +      struct xwwdt_device *xdev;
> > > >
> > > >  > > +      u32 pre_timeout = 0;
> > > >
> > > >  > > +      int ret;
> > > >
> > > >  > > +
> > > >
> > > >  > > +      xdev = devm_kzalloc(dev, sizeof(*xdev), GFP_KERNEL);
> > > >
> > > >  > > +      if (!xdev)
> > > >
> > > >  > > +                      return -ENOMEM;
> > > >
> > > >  > > +
> > > >
> > > >  > > +      xilinx_wwdt_wdd = &xdev->xilinx_wwdt_wdd;
> > > >
> > > >  > > +      xilinx_wwdt_wdd->info = &xilinx_wwdt_ident;
> > > >
> > > >  > > +      xilinx_wwdt_wdd->ops = &xilinx_wwdt_ops;
> > > >
> > > >  > > +      xilinx_wwdt_wdd->parent = dev;
> > > >
> > > >  > > +
> > > >
> > > >  > > +      xdev->base = devm_platform_ioremap_resource(pdev, 0);
> > > >
> > > >  > > +      if (IS_ERR(xdev->base))
> > > >
> > > >  > > +                      return PTR_ERR(xdev->base);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      ret = of_property_read_u32(dev->of_node,
> > > > "pretimeout-sec",
> > > >
> > > >  > > +
> > > > &pre_timeout);
> > > >
> > > >  > > +      if (ret)
> > > >
> > > >  > > +                      dev_dbg(dev,
> > > >
> > > >  > > +                                      "Parameter
> > > > \"pretimeout-sec\" not found\n");
> > > >
> > > >  > > +
> > > >
> > > >  > > +      xdev->clk = devm_clk_get(dev, NULL);
> > > >
> > > >  > > +      if (IS_ERR(xdev->clk))
> > > >
> > > >  > > +                      return PTR_ERR(xdev->clk);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      ret = clk_get_rate(xdev->clk);
> > > >
> > > >  > > +      if (!ret)
> > > >
> > > >  > > +                      return -EINVAL;
> > > >
> > > >  > > +
> > > >
> > > >  > > +      ret = clk_prepare_enable(xdev->clk);
> > > >
> > > >  > > +      if (ret) {
> > > >
> > > >  > > +                      dev_err(dev, "unable to enable
> > > > clock\n");
> > > >
> > > >  > > +                      return ret;
> > > >
> > > >  > > +      }
> > > >
> > > >  > > +      ret = devm_add_action_or_reset(dev,
> > > >
> > > >  > xwwdt_clk_disable_unprepare,
> > > >
> > > >  > > +
> > > > xdev->clk);
> > > >
> > > >  > > +      if (ret)
> > > >
> > > >  > > +                      goto err_clk_disable;
> > > >
> > > >  > > +
> > > >
> > > >  >
> > > >
> > > >  > Seems pointless. What happens when you unload the driver ?
> > > >
> > > >  >
> > > >
> > > >  > > +      xilinx_wwdt_wdd->pretimeout = pre_timeout;
> > > >
> > > >  > > +      xilinx_wwdt_wdd->timeout = XWWDT_DEFAULT_TIMEOUT;
> > > >
> > > >  > > +      xilinx_wwdt_wdd->min_timeout = XWWDT_MIN_TIMEOUT;
> > > >
> > > >  > > +      xilinx_wwdt_wdd->max_timeout = XWWDT_MAX_TIMEOUT;
> > > >
> > > >  > > +
> > > >
> > > >  > > +      xdev->irq = platform_get_irq_byname(pdev, "wdt");
> > > >
> > > >  > > +      if (xdev->irq < 0) {
> > > >
> > > >  > > +                      ret = xdev->irq;
> > > >
> > > >  > > +                      goto err_clk_disable;
> > > >
> > > >  > > +      }
> > > >
> > > >  > > +
> > > >
> > > >  > > +      if (!devm_request_irq(dev, xdev->irq, xilinx_wwdt_isr,
> > > >
> > > >  > > +                                            0, dev_name(dev),
> > > > xdev)) {
> > > >
> > > >  > > +                      xilinx_wwdt_wdd->info =
> > > > &xilinx_wwdt_pretimeout_ident;
> > > >
> > > >  > > +      }
> > > >
> > > >  > > +
> > > >
> > > >  > > +      ret = watchdog_init_timeout(xilinx_wwdt_wdd,
> > > >
> > > >  > > +
> > > > wwdt_timeout, &pdev->dev);
> > > >
> > > >  > > +      if (ret)
> > > >
> > > >  > > +                      dev_info(&pdev->dev, "Configured default
> > > > timeout
> > > >
> > > >  > value\n");
> > > >
> > > >  > > +
> > > >
> > > >  > > +      spin_lock_init(&xdev->spinlock);
> > > >
> > > >  > > +      watchdog_set_drvdata(xilinx_wwdt_wdd, xdev);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      ret = devm_watchdog_register_device(dev,
> > > > xilinx_wwdt_wdd);
> > > >
> > > >  > > +      if (ret)
> > > >
> > > >  > > +                      goto err_clk_disable;
> > > >
> > > >  > > +
> > > >
> > > >  > At this point the watchdog is fully instantiated, and userspace
> > > > may have
> > > >
> > > >  > enabled it.
> > > >
> > > >  >
> > > >
> > > >  > > +      clk_disable_unprepare(xdev->clk);
> > > >
> > > >  > > +
> > > >
> > > >  > And now its clock is getting stopped. Actually, it is getting unprepared.
> > > >
> > > >  > Does this even work ?
> > > >
> > > >  >
> > > >
> > > >  > > +      dev_info(dev, "Xilinx Window Watchdog Timer with timeout
> > > > %ds\n",
> > > >
> > > >  > > +                      xilinx_wwdt_wdd->timeout);
> > > >
> > > >  > > +
> > > >
> > > >  > > +      return 0;
> > > >
> > > >  > > +
> > > >
> > > >  > > +err_clk_disable:
> > > >
> > > >  > > +      clk_disable_unprepare(xdev->clk);
> > > >
> > > >  >
> > > >
> > > >  > devm_add_action_or_reset() already handles this.
> > > >
> > > >  >
> > > >
> > > >  > > +      return ret;
> > > >
> > > >  > > +}
> > > >
> > > >  > > +
> > > >
> > > >  > > +/* Mat for of_platform binding */
> > > >
> > > >  > > +static const struct of_device_id xwwdt_of_match[] = {
> > > >
> > > >  > > +      { .compatible = "xlnx,versal-wwdt-1.0", },
> > > >
> > > >  > > +      {},
> > > >
> > > >  > > +};
> > > >
> > > >  > > +MODULE_DEVICE_TABLE(of, xwwdt_of_match);
> > > >
> > > >  > > +
> > > >
> > > >  > > +static struct platform_driver xwwdt_driver = {
> > > >
> > > >  > > +      .probe = xwwdt_probe,
> > > >
> > > >  > > +      .driver = {
> > > >
> > > >  > > +                      .name = "Xilinx Window Watchdog",
> > > >
> > > >  > > +                      .of_match_table = xwwdt_of_match,
> > > >
> > > >  > > +      },
> > > >
> > > >  > > +};
> > > >
> > > >  > > +
> > > >
> > > >  > > +module_platform_driver(xwwdt_driver);
> > > >
> > > >  > > +
> > > >
> > > >  > > +MODULE_AUTHOR("Neeli Srinivas <sneeli@xilinx.com
> > > > <mailto:sneeli@xilinx.com>>");
> > > >
> > > >  > > +MODULE_DESCRIPTION("Xilinx Window Watchdog driver");
> > > >
> > > >  > > +MODULE_LICENSE("GPL");
> > > >
> > > >  > >
> > > >
> > > > Thanks
> > > >
> > > > Srinivas Neeli.
> > > >
> 

[PATCH 3/3] MAINTAINERS: Add fragment for xilinx watchdog drivers

[Srinivas Neeli]

Added entry for xilinx WATCHDOG drivers.

Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com>
---
 MAINTAINERS | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 6e183abbbd2e..2fd332e11e1d 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20081,6 +20081,16 @@ F:	Documentation/devicetree/bindings/media/xilinx/
 F:	drivers/media/platform/xilinx/
 F:	include/uapi/linux/xilinx-v4l2-controls.h
 
+XILINX WATCHDOG DRIVER
+M:	Srinivas Neeli <srinivas.neeli@xilinx.com>
+R:	Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
+R:	Michal Simek <michal.simek@xilinx.com>
+S:	Maintained
+F:	Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt
+F:	Documentation/devicetree/bindings/watchdog/xlnx,versal-wwdt.yaml
+F:	drivers/watchdog/of_xilinx_wdt.c
+F:	drivers/watchdog/xilinx_wwdt.c
+
 XILINX ZYNQMP DPDMA DRIVER
 M:	Hyun Kwon <hyun.kwon@xilinx.com>
 M:	Laurent Pinchart <laurent.pinchart@ideasonboard.com>
-- 
2.22.0