Linux-Watchdog Archive on lore.kernel.org
 help / color / Atom feed
From: Russell King <rmk+kernel@armlinux.org.uk>
To: Guenter Roeck <linux@roeck-us.net>,
	Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: linux-watchdog@vger.kernel.org
Subject: [PATCH] watchdog: orion: fix platform_get_irq() complaints
Date: Fri, 29 Nov 2019 14:51:35 +0000
Message-ID: <E1iahcN-0000AT-Co@rmk-PC.armlinux.org.uk> (raw)

Fix:

orion_wdt f1020300.watchdog: IRQ index 1 not found

which is caused by platform_get_irq() now complaining when optional
IRQs are not found.  Neither interrupt for orion is required, so
make them both optional.

Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
---
 drivers/watchdog/orion_wdt.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/watchdog/orion_wdt.c b/drivers/watchdog/orion_wdt.c
index 1cccf8eb1c5d..8e6dfe76f9c9 100644
--- a/drivers/watchdog/orion_wdt.c
+++ b/drivers/watchdog/orion_wdt.c
@@ -602,7 +602,7 @@ static int orion_wdt_probe(struct platform_device *pdev)
 		set_bit(WDOG_HW_RUNNING, &dev->wdt.status);
 
 	/* Request the IRQ only after the watchdog is disabled */
-	irq = platform_get_irq(pdev, 0);
+	irq = platform_get_irq_optional(pdev, 0);
 	if (irq > 0) {
 		/*
 		 * Not all supported platforms specify an interrupt for the
@@ -617,7 +617,7 @@ static int orion_wdt_probe(struct platform_device *pdev)
 	}
 
 	/* Optional 2nd interrupt for pretimeout */
-	irq = platform_get_irq(pdev, 1);
+	irq = platform_get_irq_optional(pdev, 1);
 	if (irq > 0) {
 		orion_wdt_info.options |= WDIOF_PRETIMEOUT;
 		ret = devm_request_irq(&pdev->dev, irq, orion_wdt_pre_irq,
-- 
2.20.1


             reply index

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-29 14:51 Russell King [this message]
2019-11-29 14:56 ` Russell King - ARM Linux admin
2019-11-29 15:51 ` Guenter Roeck

Reply instructions:

You may reply publically to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=E1iahcN-0000AT-Co@rmk-PC.armlinux.org.uk \
    --to=rmk+kernel@armlinux.org.uk \
    --cc=linux-watchdog@vger.kernel.org \
    --cc=linux@roeck-us.net \
    --cc=wim@linux-watchdog.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Linux-Watchdog Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lore.kernel.org/linux-watchdog/0 linux-watchdog/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 linux-watchdog linux-watchdog/ https://lore.kernel.org/linux-watchdog \
		linux-watchdog@vger.kernel.org
	public-inbox-index linux-watchdog

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-watchdog


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git