* [PATCH v7 2/6] mfd: Support ROHM BD9576MUF and BD9573MUF
2021-01-22 14:30 [PATCH v7 0/6] Support ROHM BD9576MUF and BD9573MUF PMICs Matti Vaittinen
@ 2021-01-22 14:32 ` Matti Vaittinen
2021-02-09 14:55 ` Lee Jones
2021-01-22 14:34 ` [PATCH v7 4/6] wdt: Support wdt on " Matti Vaittinen
` (2 subsequent siblings)
3 siblings, 1 reply; 8+ messages in thread
From: Matti Vaittinen @ 2021-01-22 14:32 UTC (permalink / raw)
To: matti.vaittinen, mazziesaccount
Cc: Lee Jones, Rob Herring, Matti Vaittinen, Liam Girdwood,
Mark Brown, Wim Van Sebroeck, Guenter Roeck, Geert Uytterhoeven,
devicetree, linux-kernel, linux-power, linux-watchdog,
Yoshihiro Shimoda
Add core support for ROHM BD9576MUF and BD9573MUF PMICs which are
mainly used to power the R-Car series processors.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
Changes since v6:
- no changes
drivers/mfd/Kconfig | 11 ++++
drivers/mfd/Makefile | 1 +
drivers/mfd/rohm-bd9576.c | 108 +++++++++++++++++++++++++++++++
include/linux/mfd/rohm-bd957x.h | 59 +++++++++++++++++
include/linux/mfd/rohm-generic.h | 2 +
5 files changed, 181 insertions(+)
create mode 100644 drivers/mfd/rohm-bd9576.c
create mode 100644 include/linux/mfd/rohm-bd957x.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index bdfce7b15621..53c7c96283bd 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1998,6 +1998,17 @@ config MFD_ROHM_BD71828
Also included is a Coulomb counter, a real-time clock (RTC), and
a 32.768 kHz clock gate.
+config MFD_ROHM_BD957XMUF
+ tristate "ROHM BD9576MUF and BD9573MUF Power Management ICs"
+ depends on I2C=y
+ depends on OF
+ select REGMAP_I2C
+ select MFD_CORE
+ help
+ Select this option to get support for the ROHM BD9576MUF and
+ BD9573MUF Power Management ICs. BD9576 and BD9573 are primarily
+ designed to be used to power R-Car series processors.
+
config MFD_STM32_LPTIMER
tristate "Support for STM32 Low-Power Timer"
depends on (ARCH_STM32 && OF) || COMPILE_TEST
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 14fdb188af02..e58fae024bb2 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -262,6 +262,7 @@ obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o
obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o
obj-$(CONFIG_MFD_ROHM_BD71828) += rohm-bd71828.o
obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
+obj-$(CONFIG_MFD_ROHM_BD957XMUF) += rohm-bd9576.o
obj-$(CONFIG_MFD_STMFX) += stmfx.o
obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
diff --git a/drivers/mfd/rohm-bd9576.c b/drivers/mfd/rohm-bd9576.c
new file mode 100644
index 000000000000..f4dd9e438427
--- /dev/null
+++ b/drivers/mfd/rohm-bd9576.c
@@ -0,0 +1,108 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+//
+// Copyright (C) 2020 ROHM Semiconductors
+//
+// ROHM BD9576MUF and BD9573MUF PMIC driver
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rohm-bd957x.h>
+#include <linux/mfd/rohm-generic.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+static struct mfd_cell bd9573_mfd_cells[] = {
+ { .name = "bd9573-pmic", },
+ { .name = "bd9576-wdt", },
+};
+
+static struct mfd_cell bd9576_mfd_cells[] = {
+ { .name = "bd9576-pmic", },
+ { .name = "bd9576-wdt", },
+};
+
+static const struct regmap_range volatile_ranges[] = {
+ regmap_reg_range(BD957X_REG_SMRB_ASSERT, BD957X_REG_SMRB_ASSERT),
+ regmap_reg_range(BD957X_REG_PMIC_INTERNAL_STAT,
+ BD957X_REG_PMIC_INTERNAL_STAT),
+ regmap_reg_range(BD957X_REG_INT_THERM_STAT, BD957X_REG_INT_THERM_STAT),
+ regmap_reg_range(BD957X_REG_INT_OVP_STAT, BD957X_REG_INT_SYS_STAT),
+ regmap_reg_range(BD957X_REG_INT_MAIN_STAT, BD957X_REG_INT_MAIN_STAT),
+};
+
+static const struct regmap_access_table volatile_regs = {
+ .yes_ranges = &volatile_ranges[0],
+ .n_yes_ranges = ARRAY_SIZE(volatile_ranges),
+};
+
+static struct regmap_config bd957x_regmap = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .volatile_table = &volatile_regs,
+ .max_register = BD957X_MAX_REGISTER,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static int bd957x_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ int ret;
+ struct regmap *regmap;
+ struct mfd_cell *mfd;
+ int cells;
+ unsigned long chip_type;
+
+ chip_type = (unsigned long)of_device_get_match_data(&i2c->dev);
+
+ switch (chip_type) {
+ case ROHM_CHIP_TYPE_BD9576:
+ mfd = bd9576_mfd_cells;
+ cells = ARRAY_SIZE(bd9576_mfd_cells);
+ break;
+ case ROHM_CHIP_TYPE_BD9573:
+ mfd = bd9573_mfd_cells;
+ cells = ARRAY_SIZE(bd9573_mfd_cells);
+ break;
+ default:
+ dev_err(&i2c->dev, "Unknown device type");
+ return -EINVAL;
+ }
+
+ regmap = devm_regmap_init_i2c(i2c, &bd957x_regmap);
+ if (IS_ERR(regmap)) {
+ dev_err(&i2c->dev, "Failed to initialize Regmap\n");
+ return PTR_ERR(regmap);
+ }
+
+ ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, mfd, cells,
+ NULL, 0, NULL);
+ if (ret)
+ dev_err(&i2c->dev, "Failed to create subdevices\n");
+
+ return ret;
+}
+
+static const struct of_device_id bd957x_of_match[] = {
+ { .compatible = "rohm,bd9576", .data = (void *)ROHM_CHIP_TYPE_BD9576, },
+ { .compatible = "rohm,bd9573", .data = (void *)ROHM_CHIP_TYPE_BD9573, },
+ { },
+};
+MODULE_DEVICE_TABLE(of, bd957x_of_match);
+
+static struct i2c_driver bd957x_drv = {
+ .driver = {
+ .name = "rohm-bd957x",
+ .of_match_table = bd957x_of_match,
+ },
+ .probe = &bd957x_i2c_probe,
+};
+module_i2c_driver(bd957x_drv);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD9576MUF and BD9573MUF Power Management IC driver");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/rohm-bd957x.h b/include/linux/mfd/rohm-bd957x.h
new file mode 100644
index 000000000000..3e7ca6fe5d4f
--- /dev/null
+++ b/include/linux/mfd/rohm-bd957x.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/* Copyright (C) 2020 ROHM Semiconductors */
+
+#ifndef __LINUX_MFD_BD957X_H__
+#define __LINUX_MFD_BD957X_H__
+
+enum {
+ BD957X_VD50,
+ BD957X_VD18,
+ BD957X_VDDDR,
+ BD957X_VD10,
+ BD957X_VOUTL1,
+ BD957X_VOUTS1,
+};
+
+#define BD957X_REG_SMRB_ASSERT 0x15
+#define BD957X_REG_PMIC_INTERNAL_STAT 0x20
+#define BD957X_REG_INT_THERM_STAT 0x23
+#define BD957X_REG_INT_THERM_MASK 0x24
+#define BD957X_REG_INT_OVP_STAT 0x25
+#define BD957X_REG_INT_SCP_STAT 0x26
+#define BD957X_REG_INT_OCP_STAT 0x27
+#define BD957X_REG_INT_OVD_STAT 0x28
+#define BD957X_REG_INT_UVD_STAT 0x29
+#define BD957X_REG_INT_UVP_STAT 0x2a
+#define BD957X_REG_INT_SYS_STAT 0x2b
+#define BD957X_REG_INT_SYS_MASK 0x2c
+#define BD957X_REG_INT_MAIN_STAT 0x30
+#define BD957X_REG_INT_MAIN_MASK 0x31
+
+#define BD957X_REG_WDT_CONF 0x16
+
+#define BD957X_REG_POW_TRIGGER1 0x41
+#define BD957X_REG_POW_TRIGGER2 0x42
+#define BD957X_REG_POW_TRIGGER3 0x43
+#define BD957X_REG_POW_TRIGGER4 0x44
+#define BD957X_REG_POW_TRIGGERL1 0x45
+#define BD957X_REG_POW_TRIGGERS1 0x46
+
+#define BD957X_REGULATOR_EN_MASK 0xff
+#define BD957X_REGULATOR_DIS_VAL 0xff
+
+#define BD957X_VSEL_REG_MASK 0xff
+
+#define BD957X_MASK_VOUT1_TUNE 0x87
+#define BD957X_MASK_VOUT2_TUNE 0x87
+#define BD957X_MASK_VOUT3_TUNE 0x1f
+#define BD957X_MASK_VOUT4_TUNE 0x1f
+#define BD957X_MASK_VOUTL1_TUNE 0x87
+
+#define BD957X_REG_VOUT1_TUNE 0x50
+#define BD957X_REG_VOUT2_TUNE 0x53
+#define BD957X_REG_VOUT3_TUNE 0x56
+#define BD957X_REG_VOUT4_TUNE 0x59
+#define BD957X_REG_VOUTL1_TUNE 0x5c
+
+#define BD957X_MAX_REGISTER 0x61
+
+#endif
diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h
index 4283b5b33e04..58b4f1a0f4af 100644
--- a/include/linux/mfd/rohm-generic.h
+++ b/include/linux/mfd/rohm-generic.h
@@ -12,6 +12,8 @@ enum rohm_chip_type {
ROHM_CHIP_TYPE_BD71847,
ROHM_CHIP_TYPE_BD70528,
ROHM_CHIP_TYPE_BD71828,
+ ROHM_CHIP_TYPE_BD9576,
+ ROHM_CHIP_TYPE_BD9573,
ROHM_CHIP_TYPE_AMOUNT
};
--
2.25.4
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH v7 2/6] mfd: Support ROHM BD9576MUF and BD9573MUF
2021-01-22 14:32 ` [PATCH v7 2/6] mfd: Support ROHM BD9576MUF and BD9573MUF Matti Vaittinen
@ 2021-02-09 14:55 ` Lee Jones
2021-02-10 6:15 ` Matti Vaittinen
0 siblings, 1 reply; 8+ messages in thread
From: Lee Jones @ 2021-02-09 14:55 UTC (permalink / raw)
To: Matti Vaittinen
Cc: mazziesaccount, Rob Herring, Liam Girdwood, Mark Brown,
Wim Van Sebroeck, Guenter Roeck, Geert Uytterhoeven, devicetree,
linux-kernel, linux-power, linux-watchdog, Yoshihiro Shimoda
On Fri, 22 Jan 2021, Matti Vaittinen wrote:
> Add core support for ROHM BD9576MUF and BD9573MUF PMICs which are
> mainly used to power the R-Car series processors.
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> ---
> Changes since v6:
> - no changes
> drivers/mfd/Kconfig | 11 ++++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/rohm-bd9576.c | 108 +++++++++++++++++++++++++++++++
> include/linux/mfd/rohm-bd957x.h | 59 +++++++++++++++++
> include/linux/mfd/rohm-generic.h | 2 +
> 5 files changed, 181 insertions(+)
> create mode 100644 drivers/mfd/rohm-bd9576.c
> create mode 100644 include/linux/mfd/rohm-bd957x.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index bdfce7b15621..53c7c96283bd 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1998,6 +1998,17 @@ config MFD_ROHM_BD71828
> Also included is a Coulomb counter, a real-time clock (RTC), and
> a 32.768 kHz clock gate.
>
> +config MFD_ROHM_BD957XMUF
> + tristate "ROHM BD9576MUF and BD9573MUF Power Management ICs"
> + depends on I2C=y
> + depends on OF
> + select REGMAP_I2C
> + select MFD_CORE
> + help
> + Select this option to get support for the ROHM BD9576MUF and
> + BD9573MUF Power Management ICs. BD9576 and BD9573 are primarily
> + designed to be used to power R-Car series processors.
> +
> config MFD_STM32_LPTIMER
> tristate "Support for STM32 Low-Power Timer"
> depends on (ARCH_STM32 && OF) || COMPILE_TEST
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 14fdb188af02..e58fae024bb2 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -262,6 +262,7 @@ obj-$(CONFIG_RAVE_SP_CORE) += rave-sp.o
> obj-$(CONFIG_MFD_ROHM_BD70528) += rohm-bd70528.o
> obj-$(CONFIG_MFD_ROHM_BD71828) += rohm-bd71828.o
> obj-$(CONFIG_MFD_ROHM_BD718XX) += rohm-bd718x7.o
> +obj-$(CONFIG_MFD_ROHM_BD957XMUF) += rohm-bd9576.o
> obj-$(CONFIG_MFD_STMFX) += stmfx.o
> obj-$(CONFIG_MFD_KHADAS_MCU) += khadas-mcu.o
>
> diff --git a/drivers/mfd/rohm-bd9576.c b/drivers/mfd/rohm-bd9576.c
> new file mode 100644
> index 000000000000..f4dd9e438427
> --- /dev/null
> +++ b/drivers/mfd/rohm-bd9576.c
> @@ -0,0 +1,108 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +//
> +// Copyright (C) 2020 ROHM Semiconductors
> +//
> +// ROHM BD9576MUF and BD9573MUF PMIC driver
No C++ comments (save the SPDX line) please.
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/ioport.h>
> +#include <linux/irq.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/rohm-bd957x.h>
> +#include <linux/mfd/rohm-generic.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/types.h>
> +
> +static struct mfd_cell bd9573_mfd_cells[] = {
> + { .name = "bd9573-pmic", },
> + { .name = "bd9576-wdt", },
> +};
> +
> +static struct mfd_cell bd9576_mfd_cells[] = {
> + { .name = "bd9576-pmic", },
> + { .name = "bd9576-wdt", },
> +};
What is a PMIC in this context?
To me a PMIC is a bunch of devices. What is this probing?
Maybe this is *-regulator?
> +static const struct regmap_range volatile_ranges[] = {
> + regmap_reg_range(BD957X_REG_SMRB_ASSERT, BD957X_REG_SMRB_ASSERT),
> + regmap_reg_range(BD957X_REG_PMIC_INTERNAL_STAT,
> + BD957X_REG_PMIC_INTERNAL_STAT),
> + regmap_reg_range(BD957X_REG_INT_THERM_STAT, BD957X_REG_INT_THERM_STAT),
> + regmap_reg_range(BD957X_REG_INT_OVP_STAT, BD957X_REG_INT_SYS_STAT),
> + regmap_reg_range(BD957X_REG_INT_MAIN_STAT, BD957X_REG_INT_MAIN_STAT),
> +};
> +
> +static const struct regmap_access_table volatile_regs = {
> + .yes_ranges = &volatile_ranges[0],
> + .n_yes_ranges = ARRAY_SIZE(volatile_ranges),
> +};
> +
> +static struct regmap_config bd957x_regmap = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .volatile_table = &volatile_regs,
> + .max_register = BD957X_MAX_REGISTER,
> + .cache_type = REGCACHE_RBTREE,
> +};
> +
> +static int bd957x_i2c_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + int ret;
> + struct regmap *regmap;
> + struct mfd_cell *mfd;
> + int cells;
> + unsigned long chip_type;
> +
> + chip_type = (unsigned long)of_device_get_match_data(&i2c->dev);
> +
> + switch (chip_type) {
> + case ROHM_CHIP_TYPE_BD9576:
> + mfd = bd9576_mfd_cells;
> + cells = ARRAY_SIZE(bd9576_mfd_cells);
> + break;
> + case ROHM_CHIP_TYPE_BD9573:
> + mfd = bd9573_mfd_cells;
> + cells = ARRAY_SIZE(bd9573_mfd_cells);
> + break;
> + default:
> + dev_err(&i2c->dev, "Unknown device type");
> + return -EINVAL;
> + }
> +
> + regmap = devm_regmap_init_i2c(i2c, &bd957x_regmap);
> + if (IS_ERR(regmap)) {
> + dev_err(&i2c->dev, "Failed to initialize Regmap\n");
> + return PTR_ERR(regmap);
> + }
> +
> + ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, mfd, cells,
This nomenclature is confusing.
cells and num_cells would clear it up.
> + NULL, 0, NULL);
> + if (ret)
> + dev_err(&i2c->dev, "Failed to create subdevices\n");
> +
> + return ret;
> +}
> +
> +static const struct of_device_id bd957x_of_match[] = {
> + { .compatible = "rohm,bd9576", .data = (void *)ROHM_CHIP_TYPE_BD9576, },
> + { .compatible = "rohm,bd9573", .data = (void *)ROHM_CHIP_TYPE_BD9573, },
> + { },
> +};
> +MODULE_DEVICE_TABLE(of, bd957x_of_match);
> +
> +static struct i2c_driver bd957x_drv = {
> + .driver = {
> + .name = "rohm-bd957x",
> + .of_match_table = bd957x_of_match,
> + },
> + .probe = &bd957x_i2c_probe,
> +};
> +module_i2c_driver(bd957x_drv);
> +
> +MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
> +MODULE_DESCRIPTION("ROHM BD9576MUF and BD9573MUF Power Management IC driver");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/mfd/rohm-bd957x.h b/include/linux/mfd/rohm-bd957x.h
> new file mode 100644
> index 000000000000..3e7ca6fe5d4f
> --- /dev/null
> +++ b/include/linux/mfd/rohm-bd957x.h
> @@ -0,0 +1,59 @@
> +/* SPDX-License-Identifier: GPL-2.0-or-later */
> +/* Copyright (C) 2020 ROHM Semiconductors */
> +
> +#ifndef __LINUX_MFD_BD957X_H__
> +#define __LINUX_MFD_BD957X_H__
> +
> +enum {
> + BD957X_VD50,
> + BD957X_VD18,
> + BD957X_VDDDR,
> + BD957X_VD10,
> + BD957X_VOUTL1,
> + BD957X_VOUTS1,
> +};
> +
> +#define BD957X_REG_SMRB_ASSERT 0x15
> +#define BD957X_REG_PMIC_INTERNAL_STAT 0x20
> +#define BD957X_REG_INT_THERM_STAT 0x23
> +#define BD957X_REG_INT_THERM_MASK 0x24
> +#define BD957X_REG_INT_OVP_STAT 0x25
> +#define BD957X_REG_INT_SCP_STAT 0x26
> +#define BD957X_REG_INT_OCP_STAT 0x27
> +#define BD957X_REG_INT_OVD_STAT 0x28
> +#define BD957X_REG_INT_UVD_STAT 0x29
> +#define BD957X_REG_INT_UVP_STAT 0x2a
> +#define BD957X_REG_INT_SYS_STAT 0x2b
> +#define BD957X_REG_INT_SYS_MASK 0x2c
> +#define BD957X_REG_INT_MAIN_STAT 0x30
> +#define BD957X_REG_INT_MAIN_MASK 0x31
> +
> +#define BD957X_REG_WDT_CONF 0x16
> +
> +#define BD957X_REG_POW_TRIGGER1 0x41
> +#define BD957X_REG_POW_TRIGGER2 0x42
> +#define BD957X_REG_POW_TRIGGER3 0x43
> +#define BD957X_REG_POW_TRIGGER4 0x44
> +#define BD957X_REG_POW_TRIGGERL1 0x45
> +#define BD957X_REG_POW_TRIGGERS1 0x46
> +
> +#define BD957X_REGULATOR_EN_MASK 0xff
> +#define BD957X_REGULATOR_DIS_VAL 0xff
> +
> +#define BD957X_VSEL_REG_MASK 0xff
> +
> +#define BD957X_MASK_VOUT1_TUNE 0x87
> +#define BD957X_MASK_VOUT2_TUNE 0x87
> +#define BD957X_MASK_VOUT3_TUNE 0x1f
> +#define BD957X_MASK_VOUT4_TUNE 0x1f
> +#define BD957X_MASK_VOUTL1_TUNE 0x87
> +
> +#define BD957X_REG_VOUT1_TUNE 0x50
> +#define BD957X_REG_VOUT2_TUNE 0x53
> +#define BD957X_REG_VOUT3_TUNE 0x56
> +#define BD957X_REG_VOUT4_TUNE 0x59
> +#define BD957X_REG_VOUTL1_TUNE 0x5c
> +
> +#define BD957X_MAX_REGISTER 0x61
Nit: Can you tab these out for improved readability please?
> +#endif
> diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h
> index 4283b5b33e04..58b4f1a0f4af 100644
> --- a/include/linux/mfd/rohm-generic.h
> +++ b/include/linux/mfd/rohm-generic.h
> @@ -12,6 +12,8 @@ enum rohm_chip_type {
> ROHM_CHIP_TYPE_BD71847,
> ROHM_CHIP_TYPE_BD70528,
> ROHM_CHIP_TYPE_BD71828,
> + ROHM_CHIP_TYPE_BD9576,
> + ROHM_CHIP_TYPE_BD9573,
> ROHM_CHIP_TYPE_AMOUNT
> };
>
--
Lee Jones [李琼斯]
Senior Technical Lead - Developer Services
Linaro.org │ Open source software for Arm SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: [PATCH v7 2/6] mfd: Support ROHM BD9576MUF and BD9573MUF
2021-02-09 14:55 ` Lee Jones
@ 2021-02-10 6:15 ` Matti Vaittinen
0 siblings, 0 replies; 8+ messages in thread
From: Matti Vaittinen @ 2021-02-10 6:15 UTC (permalink / raw)
To: Lee Jones
Cc: Rob Herring, Liam Girdwood, Mark Brown, Wim Van Sebroeck,
Guenter Roeck, Geert Uytterhoeven, devicetree, linux-kernel,
linux-power, linux-watchdog, Yoshihiro Shimoda
Hello Lee,
On Tue, 2021-02-09 at 14:55 +0000, Lee Jones wrote:
> On Fri, 22 Jan 2021, Matti Vaittinen wrote:
>
> > Add core support for ROHM BD9576MUF and BD9573MUF PMICs which are
> > mainly used to power the R-Car series processors.
> >
> > Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
> > ---
> > +
> > +static struct mfd_cell bd9573_mfd_cells[] = {
> > + { .name = "bd9573-pmic", },
> > + { .name = "bd9576-wdt", },
> > +};
> > +
> > +static struct mfd_cell bd9576_mfd_cells[] = {
> > + { .name = "bd9576-pmic", },
> > + { .name = "bd9576-wdt", },
> > +};
>
> What is a PMIC in this context?
>
> To me a PMIC is a bunch of devices. What is this probing?
I agree. PMIC is the IC as a whole. This name was not the best one.
>
> Maybe this is *-regulator?
That would be more descriptive and I can change this. However, it means
I need to change the already applied regulator part too. Furthermore,
all other ROHM PMIC drivers I've written use the <part-name>-pmic for
regulators and so does a few other drivers at least for ICs from Maxim,
Samsung and TI. That's why I don't think the <partname>-pmic is that
confusing. If it was my decision, I would stick with the pmic for the
sake of the consistency.
+
> > + ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO, mfd,
> > cells,
>
> This nomenclature is confusing.
>
> cells and num_cells would clear it up.
I can change it.
+
> > +#define BD957X_MAX_REGISTER 0x61
>
> Nit: Can you tab these out for improved readability please?
Sure, no problem.
Thanks for the review!
Best Regards
--Matti
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland
SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
"non cogito me" dixit Rene Descarte, deinde evanescavit
(Thanks for the translation Simon)
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH v7 4/6] wdt: Support wdt on ROHM BD9576MUF and BD9573MUF
2021-01-22 14:30 [PATCH v7 0/6] Support ROHM BD9576MUF and BD9573MUF PMICs Matti Vaittinen
2021-01-22 14:32 ` [PATCH v7 2/6] mfd: Support ROHM BD9576MUF and BD9573MUF Matti Vaittinen
@ 2021-01-22 14:34 ` Matti Vaittinen
2021-01-22 14:35 ` [PATCH v7 5/6] MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers Matti Vaittinen
2021-02-09 14:19 ` [PATCH v7 0/6] Support ROHM BD9576MUF and BD9573MUF PMICs Vaittinen, Matti
3 siblings, 0 replies; 8+ messages in thread
From: Matti Vaittinen @ 2021-01-22 14:34 UTC (permalink / raw)
To: matti.vaittinen, mazziesaccount
Cc: Lee Jones, Matti Vaittinen, Wim Van Sebroeck, Guenter Roeck,
Geert Uytterhoeven, linux-kernel, linux-power, linux-watchdog,
Yoshihiro Shimoda
Add Watchdog support for ROHM BD9576MUF and BD9573MUF PMICs which are
mainly used to power the R-Car series processors. The watchdog is
pinged using a GPIO and enabled using another GPIO. Additionally
watchdog time-out can be configured to HW prior starting the watchdog.
Watchdog timeout can be configured to detect only delayed ping or in
a window mode where also too fast pings are detected.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
---
Changes since v6:
- no changes
drivers/watchdog/Kconfig | 13 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bd9576_wdt.c | 291 ++++++++++++++++++++++++++++++++++
3 files changed, 305 insertions(+)
create mode 100644 drivers/watchdog/bd9576_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 7ff941e71b79..67eff0cbd7e1 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -172,6 +172,19 @@ config BD70528_WATCHDOG
Alternatively say M to compile the driver as a module,
which will be called bd70528_wdt.
+config BD957XMUF_WATCHDOG
+ tristate "ROHM BD9576MUF and BD9573MUF PMIC Watchdog"
+ depends on MFD_ROHM_BD957XMUF
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the ROHM BD9576 and BD9573 PMICs.
+ These PMIC ICs contain watchdog block which can be configured
+ to toggle reset line if SoC fails to ping watchdog via GPIO.
+
+ Say Y here to include support for the ROHM BD9576 or BD9573
+ watchdog. Alternatively say M to compile the driver as a module,
+ which will be called bd9576_wdt.
+
config DA9052_WATCHDOG
tristate "Dialog DA9052 Watchdog"
depends on PMIC_DA9052 || COMPILE_TEST
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 5c74ee19d441..9341f72bf0aa 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -208,6 +208,7 @@ obj-$(CONFIG_XEN_WDT) += xen_wdt.o
# Architecture Independent
obj-$(CONFIG_BD70528_WATCHDOG) += bd70528_wdt.o
+obj-$(CONFIG_BD957XMUF_WATCHDOG) += bd9576_wdt.o
obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
obj-$(CONFIG_DA9062_WATCHDOG) += da9062_wdt.o
diff --git a/drivers/watchdog/bd9576_wdt.c b/drivers/watchdog/bd9576_wdt.c
new file mode 100644
index 000000000000..0b6999f3b6e8
--- /dev/null
+++ b/drivers/watchdog/bd9576_wdt.c
@@ -0,0 +1,291 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2020 ROHM Semiconductors
+ *
+ * ROHM BD9576MUF and BD9573MUF Watchdog driver
+ */
+
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/rohm-bd957x.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/watchdog.h>
+
+static bool nowayout;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default=\"false\")");
+
+#define HW_MARGIN_MIN 2
+#define HW_MARGIN_MAX 4416
+#define BD957X_WDT_DEFAULT_MARGIN 4416
+#define WATCHDOG_TIMEOUT 30
+
+struct bd9576_wdt_priv {
+ struct gpio_desc *gpiod_ping;
+ struct gpio_desc *gpiod_en;
+ struct device *dev;
+ struct regmap *regmap;
+ bool always_running;
+ struct watchdog_device wdd;
+};
+
+static void bd9576_wdt_disable(struct bd9576_wdt_priv *priv)
+{
+ gpiod_set_value_cansleep(priv->gpiod_en, 0);
+}
+
+static int bd9576_wdt_ping(struct watchdog_device *wdd)
+{
+ struct bd9576_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+ /* Pulse */
+ gpiod_set_value_cansleep(priv->gpiod_ping, 1);
+ gpiod_set_value_cansleep(priv->gpiod_ping, 0);
+
+ return 0;
+}
+
+static int bd9576_wdt_start(struct watchdog_device *wdd)
+{
+ struct bd9576_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+ gpiod_set_value_cansleep(priv->gpiod_en, 1);
+
+ return bd9576_wdt_ping(wdd);
+}
+
+static int bd9576_wdt_stop(struct watchdog_device *wdd)
+{
+ struct bd9576_wdt_priv *priv = watchdog_get_drvdata(wdd);
+
+ if (!priv->always_running)
+ bd9576_wdt_disable(priv);
+ else
+ set_bit(WDOG_HW_RUNNING, &wdd->status);
+
+ return 0;
+}
+
+static const struct watchdog_info bd957x_wdt_ident = {
+ .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING |
+ WDIOF_SETTIMEOUT,
+ .identity = "BD957x Watchdog",
+};
+
+static const struct watchdog_ops bd957x_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = bd9576_wdt_start,
+ .stop = bd9576_wdt_stop,
+ .ping = bd9576_wdt_ping,
+};
+
+/* Unit is hundreds of uS */
+#define FASTNG_MIN 23
+
+static int find_closest_fast(int target, int *sel, int *val)
+{
+ int i;
+ int window = FASTNG_MIN;
+
+ for (i = 0; i < 8 && window < target; i++)
+ window <<= 1;
+
+ *val = window;
+ *sel = i;
+
+ if (i == 8)
+ return -EINVAL;
+
+ return 0;
+
+}
+
+static int find_closest_slow_by_fast(int fast_val, int target, int *slowsel)
+{
+ int sel;
+ static const int multipliers[] = {2, 3, 7, 15};
+
+ for (sel = 0; sel < ARRAY_SIZE(multipliers) &&
+ multipliers[sel] * fast_val < target; sel++)
+ ;
+
+ if (sel == ARRAY_SIZE(multipliers))
+ return -EINVAL;
+
+ *slowsel = sel;
+
+ return 0;
+}
+
+static int find_closest_slow(int target, int *slow_sel, int *fast_sel)
+{
+ static const int multipliers[] = {2, 3, 7, 15};
+ int i, j;
+ int val = 0;
+ int window = FASTNG_MIN;
+
+ for (i = 0; i < 8; i++) {
+ for (j = 0; j < ARRAY_SIZE(multipliers); j++) {
+ int slow;
+
+ slow = window * multipliers[j];
+ if (slow >= target && (!val || slow < val)) {
+ val = slow;
+ *fast_sel = i;
+ *slow_sel = j;
+ }
+ }
+ window <<= 1;
+ }
+ if (!val)
+ return -EINVAL;
+
+ return 0;
+}
+
+#define BD957X_WDG_TYPE_WINDOW BIT(5)
+#define BD957X_WDG_TYPE_SLOW 0
+#define BD957X_WDG_TYPE_MASK BIT(5)
+#define BD957X_WDG_NG_RATIO_MASK 0x18
+#define BD957X_WDG_FASTNG_MASK 0x7
+
+static int bd957x_set_wdt_mode(struct bd9576_wdt_priv *priv, int hw_margin,
+ int hw_margin_min)
+{
+ int ret, fastng, slowng, type, reg, mask;
+ struct device *dev = priv->dev;
+
+ /* convert to 100uS */
+ hw_margin *= 10;
+ hw_margin_min *= 10;
+ if (hw_margin_min) {
+ int min;
+
+ type = BD957X_WDG_TYPE_WINDOW;
+ dev_dbg(dev, "Setting type WINDOW 0x%x\n", type);
+ ret = find_closest_fast(hw_margin_min, &fastng, &min);
+ if (ret) {
+ dev_err(dev, "bad WDT window for fast timeout\n");
+ return ret;
+ }
+
+ ret = find_closest_slow_by_fast(min, hw_margin, &slowng);
+ if (ret) {
+ dev_err(dev, "bad WDT window\n");
+ return ret;
+ }
+
+ } else {
+ type = BD957X_WDG_TYPE_SLOW;
+ dev_dbg(dev, "Setting type SLOW 0x%x\n", type);
+ ret = find_closest_slow(hw_margin, &slowng, &fastng);
+ if (ret) {
+ dev_err(dev, "bad WDT window\n");
+ return ret;
+ }
+ }
+
+ slowng <<= ffs(BD957X_WDG_NG_RATIO_MASK) - 1;
+ reg = type | slowng | fastng;
+ mask = BD957X_WDG_TYPE_MASK | BD957X_WDG_NG_RATIO_MASK |
+ BD957X_WDG_FASTNG_MASK;
+ ret = regmap_update_bits(priv->regmap, BD957X_REG_WDT_CONF,
+ mask, reg);
+
+ return ret;
+}
+
+static int bd9576_wdt_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->parent->of_node;
+ struct bd9576_wdt_priv *priv;
+ u32 hw_margin[2];
+ u32 hw_margin_max = BD957X_WDT_DEFAULT_MARGIN, hw_margin_min = 0;
+ int ret;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, priv);
+
+ priv->dev = dev;
+ priv->regmap = dev_get_regmap(dev->parent, NULL);
+ if (!priv->regmap) {
+ dev_err(dev, "No regmap found\n");
+ return -ENODEV;
+ }
+
+ priv->gpiod_en = devm_gpiod_get_from_of_node(dev, dev->parent->of_node,
+ "rohm,watchdog-enable-gpios",
+ 0, GPIOD_OUT_LOW,
+ "watchdog-enable");
+ if (IS_ERR(priv->gpiod_en))
+ return dev_err_probe(dev, PTR_ERR(priv->gpiod_en),
+ "getting watchdog-enable GPIO failed\n");
+
+ priv->gpiod_ping = devm_gpiod_get_from_of_node(dev, dev->parent->of_node,
+ "rohm,watchdog-ping-gpios",
+ 0, GPIOD_OUT_LOW,
+ "watchdog-ping");
+ if (IS_ERR(priv->gpiod_ping))
+ return dev_err_probe(dev, PTR_ERR(priv->gpiod_ping),
+ "getting watchdog-ping GPIO failed\n");
+
+ ret = of_property_read_variable_u32_array(np, "rohm,hw-timeout-ms",
+ &hw_margin[0], 1, 2);
+ if (ret < 0 && ret != -EINVAL)
+ return ret;
+
+ if (ret == 1)
+ hw_margin_max = hw_margin[0];
+
+ if (ret == 2) {
+ hw_margin_max = hw_margin[1];
+ hw_margin_min = hw_margin[0];
+ }
+
+ ret = bd957x_set_wdt_mode(priv, hw_margin_max, hw_margin_min);
+ if (ret)
+ return ret;
+
+ priv->always_running = of_property_read_bool(np, "always-running");
+
+ watchdog_set_drvdata(&priv->wdd, priv);
+
+ priv->wdd.info = &bd957x_wdt_ident;
+ priv->wdd.ops = &bd957x_wdt_ops;
+ priv->wdd.min_hw_heartbeat_ms = hw_margin_min;
+ priv->wdd.max_hw_heartbeat_ms = hw_margin_max;
+ priv->wdd.parent = dev;
+ priv->wdd.timeout = WATCHDOG_TIMEOUT;
+
+ watchdog_init_timeout(&priv->wdd, 0, dev);
+ watchdog_set_nowayout(&priv->wdd, nowayout);
+
+ watchdog_stop_on_reboot(&priv->wdd);
+
+ if (priv->always_running)
+ bd9576_wdt_start(&priv->wdd);
+
+ return devm_watchdog_register_device(dev, &priv->wdd);
+}
+
+static struct platform_driver bd9576_wdt_driver = {
+ .driver = {
+ .name = "bd9576-wdt",
+ },
+ .probe = bd9576_wdt_probe,
+};
+
+module_platform_driver(bd9576_wdt_driver);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD9576/BD9573 Watchdog driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:bd9576-wdt");
--
2.25.4
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH v7 5/6] MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers
2021-01-22 14:30 [PATCH v7 0/6] Support ROHM BD9576MUF and BD9573MUF PMICs Matti Vaittinen
2021-01-22 14:32 ` [PATCH v7 2/6] mfd: Support ROHM BD9576MUF and BD9573MUF Matti Vaittinen
2021-01-22 14:34 ` [PATCH v7 4/6] wdt: Support wdt on " Matti Vaittinen
@ 2021-01-22 14:35 ` Matti Vaittinen
2021-01-23 18:38 ` Guenter Roeck
2021-02-09 14:19 ` [PATCH v7 0/6] Support ROHM BD9576MUF and BD9573MUF PMICs Vaittinen, Matti
3 siblings, 1 reply; 8+ messages in thread
From: Matti Vaittinen @ 2021-01-22 14:35 UTC (permalink / raw)
To: matti.vaittinen, mazziesaccount
Cc: Lee Jones, Rob Herring, Matti Vaittinen, Liam Girdwood,
Mark Brown, Wim Van Sebroeck, Guenter Roeck, Geert Uytterhoeven,
devicetree, linux-kernel, linux-power, linux-watchdog,
Yoshihiro Shimoda
Add maintainer entries for ROHM BD9576MUF and ROHM BD9573MUF drivers.
MFD, regulator and watchdog drivers were introduced for these PMICs.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
---
Changes since v6:
- no changes
MAINTAINERS | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index cc1e6a5ee6e6..b59b7877258c 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -15336,16 +15336,20 @@ F: drivers/gpio/gpio-bd71828.c
F: drivers/mfd/rohm-bd70528.c
F: drivers/mfd/rohm-bd71828.c
F: drivers/mfd/rohm-bd718x7.c
+F: drivers/mfd/rohm-bd9576.c
F: drivers/power/supply/bd70528-charger.c
F: drivers/regulator/bd70528-regulator.c
F: drivers/regulator/bd71828-regulator.c
F: drivers/regulator/bd718x7-regulator.c
+F: drivers/regulator/bd9576-regulator.c
F: drivers/regulator/rohm-regulator.c
F: drivers/rtc/rtc-bd70528.c
F: drivers/watchdog/bd70528_wdt.c
+F: drivers/watchdog/bd9576_wdt.c
F: include/linux/mfd/rohm-bd70528.h
F: include/linux/mfd/rohm-bd71828.h
F: include/linux/mfd/rohm-bd718x7.h
+F: include/linux/mfd/rohm-bd957x.h
F: include/linux/mfd/rohm-generic.h
F: include/linux/mfd/rohm-shared.h
--
2.25.4
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]
^ permalink raw reply related [flat|nested] 8+ messages in thread
* Re: [PATCH v7 5/6] MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers
2021-01-22 14:35 ` [PATCH v7 5/6] MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers Matti Vaittinen
@ 2021-01-23 18:38 ` Guenter Roeck
0 siblings, 0 replies; 8+ messages in thread
From: Guenter Roeck @ 2021-01-23 18:38 UTC (permalink / raw)
To: Matti Vaittinen
Cc: mazziesaccount, Lee Jones, Rob Herring, Liam Girdwood,
Mark Brown, Wim Van Sebroeck, Geert Uytterhoeven, devicetree,
linux-kernel, linux-power, linux-watchdog, Yoshihiro Shimoda
On Fri, Jan 22, 2021 at 04:35:10PM +0200, Matti Vaittinen wrote:
> Add maintainer entries for ROHM BD9576MUF and ROHM BD9573MUF drivers.
> MFD, regulator and watchdog drivers were introduced for these PMICs.
>
> Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
> ---
> Changes since v6:
> - no changes
> MAINTAINERS | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index cc1e6a5ee6e6..b59b7877258c 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -15336,16 +15336,20 @@ F: drivers/gpio/gpio-bd71828.c
> F: drivers/mfd/rohm-bd70528.c
> F: drivers/mfd/rohm-bd71828.c
> F: drivers/mfd/rohm-bd718x7.c
> +F: drivers/mfd/rohm-bd9576.c
> F: drivers/power/supply/bd70528-charger.c
> F: drivers/regulator/bd70528-regulator.c
> F: drivers/regulator/bd71828-regulator.c
> F: drivers/regulator/bd718x7-regulator.c
> +F: drivers/regulator/bd9576-regulator.c
> F: drivers/regulator/rohm-regulator.c
> F: drivers/rtc/rtc-bd70528.c
> F: drivers/watchdog/bd70528_wdt.c
> +F: drivers/watchdog/bd9576_wdt.c
> F: include/linux/mfd/rohm-bd70528.h
> F: include/linux/mfd/rohm-bd71828.h
> F: include/linux/mfd/rohm-bd718x7.h
> +F: include/linux/mfd/rohm-bd957x.h
> F: include/linux/mfd/rohm-generic.h
> F: include/linux/mfd/rohm-shared.h
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: [PATCH v7 0/6] Support ROHM BD9576MUF and BD9573MUF PMICs
2021-01-22 14:30 [PATCH v7 0/6] Support ROHM BD9576MUF and BD9573MUF PMICs Matti Vaittinen
` (2 preceding siblings ...)
2021-01-22 14:35 ` [PATCH v7 5/6] MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers Matti Vaittinen
@ 2021-02-09 14:19 ` Vaittinen, Matti
3 siblings, 0 replies; 8+ messages in thread
From: Vaittinen, Matti @ 2021-02-09 14:19 UTC (permalink / raw)
To: Mazziesaccount, Vaittinen, Matti
Cc: linux-power, linux, wim, broonie, devicetree, lee.jones,
linux-kernel, geert+renesas, linux-watchdog, lgirdwood, robh+dt,
yoshihiro.shimoda.uh
Hello Lee, Mark All,
On Fri, 2021-01-22 at 16:30 +0200, Matti Vaittinen wrote:
> Initial support for ROHM BD9576MUF and BD9573MUF PMICs.
>
> These PMICs are primarily intended to be used to power the R-Car
> family
> processors. BD9576MUF includes some additional safety features the
> BD9573MUF does not have. This initial version of drivers provides
> temperature, over voltage and under voltage warnings is IRQ
> information
> is passed via DT.
>
> This patch series includes MFD and watchdog drivers. Regulator part
> was
> already applied but this series brings the over-/undervoltage and
> temperature error notifications which consumer drivers can utilize.
I had some discussion with Mark and Angelo about creating a helper for
handling this kind of regulator notification IRQs.
(For anyone interested: the discussion can be seen here:
https://lore.kernel.org/lkml/6046836e22b8252983f08d5621c35ececb97820d.camel@fi.rohmeurope.com/
)
I've now drafted RFCv1 for that support (not sent it yet). The RFC
converts the BD9576 regulator driver to use the new helper and adds
some new definitions to MFD headers.
What would be the most convenient way of handling this? Should I merge
this series in the RFC and make it just one big series? Or should I
keep these as two separated series? If I keep these as separate series,
should I then omit all the MFD patches from RFC series - and add
potential MFD changes (like OVD/UVD configuration registers) in this
series (which makes bd9576 regulators not compiling) - or should the
MFD parts be included in both series - in which case we need to somehow
stay on track what parts of MFD is reviewed.
Simplest for me would be if we could get the oldest patches 1,2,4 and 5
from this series in-tree (only MFD is not acked) - but I guess it won't
happen at this point of the development cycle - and bring in the IRQ
(patch 3) and regulator notifications (patch 6) using the RFC series.
How do you see it? Should I meld this in the RFC or keep two separate
series - in which case, how should I handle the MFD changes brought by
the RFC series?
Best Regards
Matti Vaittinen
^ permalink raw reply [flat|nested] 8+ messages in thread