From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx34.mail.ru ([94.100.176.48]:16540 "EHLO mx34.mail.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751470AbZG1PiH (ORCPT ); Tue, 28 Jul 2009 11:38:07 -0400 Received: from [62.176.9.130] (port=32925 helo=[192.168.1.199]) by mx34.mail.ru with asmtp id 1MVokg-000Pae-00 for linux-wireless@vger.kernel.org; Tue, 28 Jul 2009 19:38:06 +0400 Subject: A station can't reconnect after it wakes up From: Igor Perminov To: linux-wireless@vger.kernel.org Content-Type: text/plain Date: Tue, 28 Jul 2009 19:38:05 +0400 Message-Id: <1248795485.29068.144.camel@sunlight> Mime-Version: 1.0 Sender: linux-wireless-owner@vger.kernel.org List-ID: Dear colleagues, I have an issue related to handling power-saving stations in mac80211 (AP mode) or may be to hostapd. A station can't reconnect after it wakes up (see the link to the rt2x00 forum below, issue #4). AP: Linux box with D-Link DWA-110 USB Wi-Fi stick (rt73usb kernel driver), kernel 2.6.30 with some patches, hostapd 0.6.9. Station: Toshiba G900 PDA under Windows Mobile 6.0. The environment is described in details here: http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=5&t=5486&start=10 Consider the following step-by-step: 1. A station authenticates and associates with the AP and exchanges traffic. 2. The station indicates to the AP that it is going to sleep. 3. The station device goes to the stand-by mode (not only its wi-fi card, but the device itself). 4. The station device wakes up and begins authentication with an Authentication management frame. This is the behavior of my PDA. The problem is the mac80211 stack remembers that the station has gone to sleep. So, the response frames from hostapd are buffered by mac80211. The station indicates in the Authentication frame that it isn't sleeping anymore. But the mac80211 stack analyzes sleep/wake transitions in _data_ frames only, but not in management ones. See ieee80211_rx_h_sta_process in net/mac80211/rx.c. A comment there notes: "Ignore doze->wake transitions that are indicated by non-data frames, the standard is unclear here". As the result, the station never receives the authentication response from the AP. The wireless-testing kernel seems to have this problem too. As a workaround I've added a code in hostapd, which forces the mac80211 stack to "forget" the station just after receiving an authentication frame. After this change the station can reconnect successfully. And may be it would be better to analyze not only data frames, but also some of management ones in ieee80211_rx_h_sta_process? What does the standard tell here? Best regards, Igor Perminov